Let's use the more appropriate udelay for the nand_spl. While we
can't make use of u-boot's full udelay we can atl east use a for
loop that won't get optimized away .Since we have the bus clock
we can use the timebase to calculate wall time.
Looked at reusing the u-boot udelay functions but it pulls in a lot
of code as well as depends on the gd struct and would require a lot
of rework
Signed-off-by: Matthew McClintock <m...@freescale.com>
---
v2: Change global bus_clk to use gd->bus_clk
nand_spl/board/freescale/common.c | 35 +++++++++++++++++++++
nand_spl/board/freescale/p1010rdb/Makefile | 6 +++-
nand_spl/board/freescale/p1010rdb/nand_boot.c | 11 +++----
nand_spl/board/freescale/p1_p2_rdb_pc/Makefile | 6 +++-
nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c | 12 +++----
5 files changed, 55 insertions(+), 15 deletions(-)
create mode 100644 nand_spl/board/freescale/common.c
diff --git a/nand_spl/board/freescale/common.c
b/nand_spl/board/freescale/common.c
new file mode 100644
index 0000000..983fd2e
--- /dev/null
+++ b/nand_spl/board/freescale/common.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Author: Matthew McClintock <m...@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void udelay(unsigned long usec) {
+ u32 ticks_per_usec = gd->bus_clk / (8 * 1000000);
+ u32 ticks = ticks_per_usec * usec;
+ u32 s = mfspr(SPRN_TBRL);
+
+ while ((mfspr(SPRN_TBRL)-s) < ticks);
+}
diff --git a/nand_spl/board/freescale/p1010rdb/Makefile
b/nand_spl/board/freescale/p1010rdb/Makefile
index 8d240ea..cdbd492 100644
--- a/nand_spl/board/freescale/p1010rdb/Makefile
+++ b/nand_spl/board/freescale/p1010rdb/Makefile
@@ -39,7 +39,8 @@ CFLAGS += -DCONFIG_NAND_SPL
SOBJS = start.o resetvec.o ticks.o
COBJS = cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
- nand_boot.o nand_boot_fsl_ifc.o ns16550.o tlb.o tlb_table.o
+ nand_boot.o nand_boot_fsl_ifc.o ns16550.o tlb.o tlb_table.o \
+ ../common.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -123,6 +124,9 @@ ifneq ($(OBJTREE), $(SRCTREE))
$(obj)nand_boot.c:
@rm -f $(obj)nand_boot.c
ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c
$(obj)nand_boot.c
+$(obj)../common.c:
+ @rm -f $(obj)../common.c
+ ln -s $(SRCTREE)/nand_spl/board/freescale/common.c $(obj)../common.c
endif
#########################################################################
diff --git a/nand_spl/board/freescale/p1010rdb/nand_boot.c
b/nand_spl/board/freescale/p1010rdb/nand_boot.c
index f5294d0..a075509 100644
--- a/nand_spl/board/freescale/p1010rdb/nand_boot.c
+++ b/nand_spl/board/freescale/p1010rdb/nand_boot.c
@@ -27,8 +27,9 @@
#include <asm/immap_85xx.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_law.h>
+#include <asm/global_data.h>
-#define udelay(x) { int j; for (j = 0; j < x * 10000; j++) isync(); }
+DECLARE_GLOBAL_DATA_PTR;
unsigned long ddr_freq_mhz;
@@ -82,8 +83,7 @@ void sdram_init(void)
__raw_writel((CONFIG_SYS_DDR_CS0_BNDS >> 1) & 0x0fff0fff,
&ddr->cs0_bnds);
}
- /* mimic 500us delay, with busy isync() loop */
- udelay(100);
+ udelay(500);
/* Let the controller go */
out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
@@ -94,20 +94,19 @@ void sdram_init(void)
void board_init_f(ulong bootflag)
{
u32 plat_ratio, ddr_ratio;
- unsigned long bus_clk;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
/* initialize selected port with appropriate baud rate */
plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
plat_ratio >>= 1;
- bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+ gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000;
NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
- bus_clk / 16 / CONFIG_BAUDRATE);
+ gd->bus_clk / 16 / CONFIG_BAUDRATE);
puts("\nNAND boot... ");
diff --git a/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
b/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
index 475cc49..46cf709 100644
--- a/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
+++ b/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
@@ -39,7 +39,8 @@ CFLAGS += -DCONFIG_NAND_SPL
SOBJS = start.o resetvec.o
COBJS = cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
- nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o
+ nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o \
+ ../common.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -119,6 +120,9 @@ ifneq ($(OBJTREE), $(SRCTREE))
$(obj)nand_boot.c:
@rm -f $(obj)nand_boot.c
ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c
$(obj)nand_boot.c
+$(obj)../common.c:
+ @rm -f $(obj)../common.c
+ ln -s $(SRCTREE)/nand_spl/board/freescale/common.c $(obj)../common.c
endif
#########################################################################
diff --git a/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
b/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
index b9796ea..fcff382 100644
--- a/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
+++ b/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
@@ -25,11 +25,9 @@
#include <nand.h>
#include <asm/fsl_law.h>
#include <asm/fsl_ddr_sdram.h>
+#include <asm/global_data.h>
-#define udelay(x) {int i, j; \
- for (i = 0; i < x; i++) \
- for (j = 0; j < 10000; j++) \
- ; }
+DECLARE_GLOBAL_DATA_PTR;
/*
* Fixed sdram init -- doesn't use serial presence detect.
@@ -76,7 +74,7 @@ void sdram_init(void)
void board_init_f(ulong bootflag)
{
- u32 plat_ratio, bus_clk;
+ u32 plat_ratio;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
#ifndef CONFIG_QE
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
@@ -85,10 +83,10 @@ void board_init_f(ulong bootflag)
/* initialize selected port with appropriate baud rate */
plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
plat_ratio >>= 1;
- bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+ gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
- bus_clk / 16 / CONFIG_BAUDRATE);
+ gd->bus_clk / 16 / CONFIG_BAUDRATE);
puts("\nNAND boot... ");
--
1.7.9.7
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
