Re: [U-Boot] [PATCH v3 0/22] AHCI / SATA Improvements

2012-11-04 Thread Tom Rini
On Mon, Oct 29, 2012 at 08:23:43AM -0700, Simon Glass wrote:

 This series contains a set of improvements for the SATA susbsystem, mostly
 targeted at solid-state drivers and improving start-up time.
 
 The patches are tested on various x86 Chromebooks.
 
 Changes in v3:
 - Remove use of DEFINE_PCI_DEVICE_TABLE suggested by siren checkpatch
 - Use struct pci_device_id properly
 - Add new patch to enable setenv_ulong/addr() for powerpc
 - Fix setenv operation to use correct function
 - Move missing #ifdef CONFIG_AHCI_SETFEATURES_XFER from later commit
 - Remove . from end of commit subject
 - Move #ifdef change into earlier commit
 - Add patch to support 64-bit LBA option when reading capacity
 - Add new patch to correct ide_read/write() function signatures
 
 Changes in v2:
 - Use struct pci_device_id instead of defining new struct scsi_device
 - Squash in CONFIG_PCI patch
 - Set 'scsidevs' environment variable to number of SCSI disks
 
 Gabe Black (3):
   ahci: Make sending the SETFEATURES_XFER command optional
   ahci: Make the AHCI code find the capacity of disks  128 GB properly
   ahci: Support 64-bit LBA option when reading capacity
 
 Hung-Te Lin (2):
   scsi: Add scsi_write to SCSI driver
   ahci: support scsi writing in AHCI driver
 
 Marc Jones (2):
   ahci: Support spin-up and link-up separately
   ahci: Perform SATA flush after disk write.
 
 Simon Glass (3):
   Support setenv_ulong() and setenv_addr() for powerpc
   ide: Correct function signatures for ide_read/write()
   x86: config: Enable AHCI support for coreboot
 
 Stefan Reinauer (4):
   scsi: Add function and env var to report number of scsi drives
   ahci: Optimise AHCI controller reset and start-up
   ahci: Improve AHCI debugging
   ahci: cosmetics and cleanup
 
 Taylor Hutt (4):
   ahci: Use sizeof(fis) instead of hardcoding '20'
   ahci: Fix 'Invaild' typo
   ahci: Use virt_to_phys() to denote physical addresses for DMA
   ahci: flush / invalidate dcache around SATA commands
 
 Vadim Bendebury (2):
   ahci: Support splitting of read transactions into multiple chunks
   scsi: Provide support for a list of AHCI controllers.
 
 Walter Murphy (2):
   ahci: Adjust SATA timeouts for hard disk (spinup delay  command
 timeout)
   ahci: Expand HDD Logical Block addressability up to 32 bits
 
  README |3 +
  common/cmd_ide.c   |   27 +--
  common/cmd_scsi.c  |  255 
  drivers/block/ahci.c   |  401 
 +++-
  include/ahci.h |1 +
  include/ata.h  |3 +
  include/common.h   |2 +-
  include/configs/coreboot.h |   22 +++
  include/scsi.h |4 +
  9 files changed, 585 insertions(+), 133 deletions(-)

For the series, applied to u-boot/master, thanks!

-- 
Tom


signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot


[U-Boot] [PATCH v3 0/22] AHCI / SATA Improvements

2012-10-29 Thread Simon Glass
This series contains a set of improvements for the SATA susbsystem, mostly
targeted at solid-state drivers and improving start-up time.

The patches are tested on various x86 Chromebooks.

Changes in v3:
- Remove use of DEFINE_PCI_DEVICE_TABLE suggested by siren checkpatch
- Use struct pci_device_id properly
- Add new patch to enable setenv_ulong/addr() for powerpc
- Fix setenv operation to use correct function
- Move missing #ifdef CONFIG_AHCI_SETFEATURES_XFER from later commit
- Remove . from end of commit subject
- Move #ifdef change into earlier commit
- Add patch to support 64-bit LBA option when reading capacity
- Add new patch to correct ide_read/write() function signatures

Changes in v2:
- Use struct pci_device_id instead of defining new struct scsi_device
- Squash in CONFIG_PCI patch
- Set 'scsidevs' environment variable to number of SCSI disks

Gabe Black (3):
  ahci: Make sending the SETFEATURES_XFER command optional
  ahci: Make the AHCI code find the capacity of disks  128 GB properly
  ahci: Support 64-bit LBA option when reading capacity

Hung-Te Lin (2):
  scsi: Add scsi_write to SCSI driver
  ahci: support scsi writing in AHCI driver

Marc Jones (2):
  ahci: Support spin-up and link-up separately
  ahci: Perform SATA flush after disk write.

Simon Glass (3):
  Support setenv_ulong() and setenv_addr() for powerpc
  ide: Correct function signatures for ide_read/write()
  x86: config: Enable AHCI support for coreboot

Stefan Reinauer (4):
  scsi: Add function and env var to report number of scsi drives
  ahci: Optimise AHCI controller reset and start-up
  ahci: Improve AHCI debugging
  ahci: cosmetics and cleanup

Taylor Hutt (4):
  ahci: Use sizeof(fis) instead of hardcoding '20'
  ahci: Fix 'Invaild' typo
  ahci: Use virt_to_phys() to denote physical addresses for DMA
  ahci: flush / invalidate dcache around SATA commands

Vadim Bendebury (2):
  ahci: Support splitting of read transactions into multiple chunks
  scsi: Provide support for a list of AHCI controllers.

Walter Murphy (2):
  ahci: Adjust SATA timeouts for hard disk (spinup delay  command
timeout)
  ahci: Expand HDD Logical Block addressability up to 32 bits

 README |3 +
 common/cmd_ide.c   |   27 +--
 common/cmd_scsi.c  |  255 
 drivers/block/ahci.c   |  401 +++-
 include/ahci.h |1 +
 include/ata.h  |3 +
 include/common.h   |2 +-
 include/configs/coreboot.h |   22 +++
 include/scsi.h |4 +
 9 files changed, 585 insertions(+), 133 deletions(-)

-- 
1.7.7.3

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot