Re: [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board
Hi Masahiro,
On 05/07/2014 07:47 AM, Masahiro Yamada wrote:
Hi Michal,
Sorry for late reply. (I'm back from my vacations.)
No problem at all.
Before you build u-boot you have to copy ps7_init.c/h from your
hw design to the u-boot if you want to use SPL.
Oops, I forgot to mention this.
I did that.
ok. Then I expect you are able to see at least u-boot SPL messages.
Yes. I can see them.
That's a great start.
This is what I am getting - u-boot.img has full u-boot.
U-Boot SPL 2014.01-00816-ge0c1813-dirty (Jan 22 2014 - 17:56:37)
mmc boot
reading download.bit
design filename = system.ncd;HW_TIMEOUT=FALSE;UserID=0x
part number = 7z020clg484
date = 2013/07/22
time = 17:18:11
bytes in bitstream = 4045564
zynq_load: Align buffer at 16c to 100(swap 1)
reading system.dtb
spl: error reading image system.dtb, err - -1
reading u-boot.img
reading u-boot.img
U-Boot 2014.01 (Mar 19 2014 - 08:12:51)
Memory: ECC disabled
DRAM: 1 GiB
MMC: zynq_sdhci: 0
SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16
MiB
*** Warning - bad CRC, using default environment
In:serial
Out: serial
Err: serial
Net: Gem.e000b000
U-BOOT for zynq-zc702
Gem.e000b000 Waiting for PHY auto negotiation to complete done
BOOTP broadcast 1
BOOTP broadcast 2
Abort
Hit any key to stop autoboot: 0
U-Boot-PetaLinux
Thanks!
Now I understand how to boot u-boot and Linux.
You can run Linux directly from SPL. I have tried that but without
FIT it is not so nice.
Full u-boot image of zynq enables CONFIG_OF_SEPARATE, right?
I think u-boot.img does not include device tree.
In mainline yes but I am not using it. It is nice for playing
but it is fine just to disable it and you don't need to use dts at all.
Just disable it in zynq config file.
I am not convinced why unsupported CONFIG_OF_SEPARATE is enabled.
Jagan has enabled it - don't know why but it is enabled by default.
U-boot mainline and u-boot-xlnx diverged with this point.
Which way are you going in your future development?
U-Boot control with device tree? or without device tree?
yes. I have tried OF_SEPARATE and if you copy DTS from the kernel (our repo)
you can use it and should work. At least worked when I have tried it.
u-boot should be configured from device-tree.
We are pushing a lot of drivers to mainline and we are reviewing the whole
binding to ensure that it is correct that's why I haven't pushed
any DTS file to u-boot source code for reference boards.
My question is, how to pass an init ramdisk?
I am using cpio compiled in directly in the kernel.
In which file-name should I copy init ramdisk
into SD card?
Xilinx OSL versions are using initramdisk
which you can download here.
http://www.wiki.xilinx.com/Zynq+2014.1+Release
Yes. I am using this.
ok. Then what are you trying to do? Just use latest u-boot?
Yes.
I want to run U-boot and Linux on a Zynq board.
I also want to use new features in the U-Boot mainline such as Kbuild.
That is my motivation to try to run u-boot-2014.04 on a zynq board.
ok. Just disable OF_CONTROL for now and I haven't pushed that SPL fpga
feature because it needs to be cleanup.
How should I load the init ramdisk from the SD card?
And this is the command which OSL version are using.
sdboot=if mmcinfo; then \
run uenvboot; \
echo Copying Linux from SD to RAM... \
fatload mmc 0 0x300 ${kernel_image} \
fatload mmc 0 0x2A0 ${devicetree_image} \
fatload mmc 0 0x200 ${ramdisk_image} \
bootm 0x300 0x200 0x2A0; \
fi\0 \
Yes. I know this works.
But in my understanding, SPL cannot use this command.
My question is how SPL can load the init ramdisk.
It looks like spl_load_image_fat_os() function loads
system.dtb and uImage.
But I could not find which code loads ramdisk.
Not supported yet?
yes, I think it is not supported.
I haven't had a time but Simon mentioned that they have
enabled ITS format in SPL and it should be straight forward
to do so. Then you can just use full ITS instead of DTB, kernel, ramdisk
in separate images.
This sounds reasonable!
I am looking forward to it.
my too. :-)
thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
signature.asc
Description: OpenPGP digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board
Hi Michal,
Sorry for late reply. (I'm back from my vacations.)
Before you build u-boot you have to copy ps7_init.c/h from your
hw design to the u-boot if you want to use SPL.
Oops, I forgot to mention this.
I did that.
ok. Then I expect you are able to see at least u-boot SPL messages.
Yes. I can see them.
This is what I am getting - u-boot.img has full u-boot.
U-Boot SPL 2014.01-00816-ge0c1813-dirty (Jan 22 2014 - 17:56:37)
mmc boot
reading download.bit
design filename = system.ncd;HW_TIMEOUT=FALSE;UserID=0x
part number = 7z020clg484
date = 2013/07/22
time = 17:18:11
bytes in bitstream = 4045564
zynq_load: Align buffer at 16c to 100(swap 1)
reading system.dtb
spl: error reading image system.dtb, err - -1
reading u-boot.img
reading u-boot.img
U-Boot 2014.01 (Mar 19 2014 - 08:12:51)
Memory: ECC disabled
DRAM: 1 GiB
MMC: zynq_sdhci: 0
SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16
MiB
*** Warning - bad CRC, using default environment
In:serial
Out: serial
Err: serial
Net: Gem.e000b000
U-BOOT for zynq-zc702
Gem.e000b000 Waiting for PHY auto negotiation to complete done
BOOTP broadcast 1
BOOTP broadcast 2
Abort
Hit any key to stop autoboot: 0
U-Boot-PetaLinux
Thanks!
Now I understand how to boot u-boot and Linux.
Full u-boot image of zynq enables CONFIG_OF_SEPARATE, right?
I think u-boot.img does not include device tree.
In mainline yes but I am not using it. It is nice for playing
but it is fine just to disable it and you don't need to use dts at all.
Just disable it in zynq config file.
I am not convinced why unsupported CONFIG_OF_SEPARATE is enabled.
U-boot mainline and u-boot-xlnx diverged with this point.
Which way are you going in your future development?
U-Boot control with device tree? or without device tree?
My question is, how to pass an init ramdisk?
I am using cpio compiled in directly in the kernel.
In which file-name should I copy init ramdisk
into SD card?
Xilinx OSL versions are using initramdisk
which you can download here.
http://www.wiki.xilinx.com/Zynq+2014.1+Release
Yes. I am using this.
ok. Then what are you trying to do? Just use latest u-boot?
Yes.
I want to run U-boot and Linux on a Zynq board.
I also want to use new features in the U-Boot mainline such as Kbuild.
That is my motivation to try to run u-boot-2014.04 on a zynq board.
How should I load the init ramdisk from the SD card?
And this is the command which OSL version are using.
sdboot=if mmcinfo; then \
run uenvboot; \
echo Copying Linux from SD to RAM... \
fatload mmc 0 0x300 ${kernel_image} \
fatload mmc 0 0x2A0 ${devicetree_image} \
fatload mmc 0 0x200 ${ramdisk_image} \
bootm 0x300 0x200 0x2A0; \
fi\0 \
Yes. I know this works.
But in my understanding, SPL cannot use this command.
My question is how SPL can load the init ramdisk.
It looks like spl_load_image_fat_os() function loads
system.dtb and uImage.
But I could not find which code loads ramdisk.
Not supported yet?
yes, I think it is not supported.
I haven't had a time but Simon mentioned that they have
enabled ITS format in SPL and it should be straight forward
to do so. Then you can just use full ITS instead of DTB, kernel, ramdisk
in separate images.
This sounds reasonable!
I am looking forward to it.
Best Regards
Masahiro Yamada
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board
Hi Michal, I am a user of Zynq ZC-706 board. On u-boot 2014.01 release, I put Kernel Image, Device Tree, Ramdisk into fit.itb and I could successfully boot Linux Kernel. But I don't know how to boot Kernel on u-boot 2014.04 release. Please help! The default boot sequence of Zynq on the u-boot-2014.04 release is Falcon boot, right? I am trying to boot Linux with - U-boot 2014.04 - Linux Kernel 3.14 - SD boot mode - ZC706 board What I did is roughly like this: ## U-Boot ## [1] Build u-boot [2] Convert spl/u-boot-spl.bin into boot.bin with BootGen tool [3] Copy boot.bin to FAT-fomatted SD card. ##Kernel ## [1] Build kernel with multi_v7_defconfig setting [2] Copy uImage to the SD card [3] Rename zynq-zc706.dtb into system.dtb and copy to SD card Kernel boot failed to mount the root device. My question is, how to pass an init ramdisk? In which file-name should I copy init ramdisk into SD card? How should I load the init ramdisk from the SD card? Best Regards Masahiro Yamada ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board
Hi Masahiro,
On 04/30/2014 11:54 AM, Masahiro Yamada wrote:
Hi Michal,
I am a user of Zynq ZC-706 board.
On u-boot 2014.01 release, I put Kernel Image, Device Tree,
Ramdisk into fit.itb and I could successfully boot Linux Kernel.
But I don't know how to boot Kernel on u-boot 2014.04 release.
Please help!
The default boot sequence of Zynq on the u-boot-2014.04 release
is Falcon boot, right?
I personally use SPL-full u-boot - linux
but IRC I have also tested SPL-linux.
I am trying to boot Linux with
- U-boot 2014.04
- Linux Kernel 3.14
- SD boot mode
- ZC706 board
What I did is roughly like this:
## U-Boot ##
Before you build u-boot you have to copy ps7_init.c/h from your
hw design to the u-boot if you want to use SPL.
[1] Build u-boot
[2] Convert spl/u-boot-spl.bin into boot.bin
with BootGen tool
yes - or if you look at xilinx git u-boot repo we have one
simple python script which does this automatically without bootgen.
[3] Copy boot.bin to FAT-fomatted SD card.
yes.
I personally use SD boot mode it means boot.bin has just u-boot SPL
and u-boot.img on SD stores full u-boot.
Keep in your mind that using U-BOOT SPL is not fully supported flow.
Supported flow is fsbl-u-boot-linux.
##Kernel ##
[1] Build kernel with multi_v7_defconfig setting
[2] Copy uImage to the SD card
[3] Rename zynq-zc706.dtb into system.dtb
and copy to SD card
this step just depend on your configuration.
Kernel boot failed to mount the root device.
My question is, how to pass an init ramdisk?
I am using cpio compiled in directly in the kernel.
In which file-name should I copy init ramdisk
into SD card?
Xilinx OSL versions are using initramdisk
which you can download here.
http://www.wiki.xilinx.com/Zynq+2014.1+Release
How should I load the init ramdisk from the SD card?
And this is the command which OSL version are using.
sdboot=if mmcinfo; then \
run uenvboot; \
echo Copying Linux from SD to RAM... \
fatload mmc 0 0x300 ${kernel_image} \
fatload mmc 0 0x2A0 ${devicetree_image} \
fatload mmc 0 0x200 ${ramdisk_image} \
bootm 0x300 0x200 0x2A0; \
fi\0 \
You can probably add ramdisk_image to ITS format too.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
signature.asc
Description: OpenPGP digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board
Hi Heshsham,
Thanks for your offering help!
On Wed, 30 Apr 2014 15:52:02 +0530
Heshsham Abdul Basit hf.ba...@gmail.com wrote:
Hi Masahiro,
Although this is not directed to me, but perhaps I can help you out. I am
working on zc702 board.
Can you copy paste the content of your bif file that you use with bootgen
to generate BOOT.BIN file?
My BIF file is super simple. Like this.
image:
{
[bootloader,load=0x]u-boot/spl/u-boot-spl.bin
}
Best Regards
Masahiro Yamada
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board
Hi Michal.
Thanks for your reply.
Before you build u-boot you have to copy ps7_init.c/h from your
hw design to the u-boot if you want to use SPL.
Oops, I forgot to mention this.
I did that.
[1] Build u-boot
[2] Convert spl/u-boot-spl.bin into boot.bin
with BootGen tool
yes - or if you look at xilinx git u-boot repo we have one
simple python script which does this automatically without bootgen.
I found tools/zynq-boot-bin.py
Is this the one you mentioned?
[3] Copy boot.bin to FAT-fomatted SD card.
yes.
I personally use SD boot mode it means boot.bin has just u-boot SPL
and u-boot.img on SD stores full u-boot.
On u-boot 2014.04 release, I don't know how to use full u-boot either.
Full u-boot image of zynq enables CONFIG_OF_SEPARATE, right?
I think u-boot.img does not include device tree.
Should I combine u-boot.img and device tree by myself? Like this?
cat u-boot.img u-boot.dtb u-boot.img.tmp
mv u-boot.img.tmp u-boot.img
Or should I disable CONFIG_OF_SEPARATE?
Keep in your mind that using U-BOOT SPL is not fully supported flow.
Supported flow is fsbl-u-boot-linux.
OK.
Maybe I should stick to the old flow.
My question is, how to pass an init ramdisk?
I am using cpio compiled in directly in the kernel.
In which file-name should I copy init ramdisk
into SD card?
Xilinx OSL versions are using initramdisk
which you can download here.
http://www.wiki.xilinx.com/Zynq+2014.1+Release
Yes. I am using this.
How should I load the init ramdisk from the SD card?
And this is the command which OSL version are using.
sdboot=if mmcinfo; then \
run uenvboot; \
echo Copying Linux from SD to RAM... \
fatload mmc 0 0x300 ${kernel_image} \
fatload mmc 0 0x2A0 ${devicetree_image} \
fatload mmc 0 0x200 ${ramdisk_image} \
bootm 0x300 0x200 0x2A0; \
fi\0 \
Yes. I know this works.
But in my understanding, SPL cannot use this command.
My question is how SPL can load the init ramdisk.
It looks like spl_load_image_fat_os() function loads
system.dtb and uImage.
But I could not find which code loads ramdisk.
Not supported yet?
Best Regards
Masahiro Yamada
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board
Hi,
On 04/30/2014 01:31 PM, Masahiro Yamada wrote:
Hi Michal.
Thanks for your reply.
Before you build u-boot you have to copy ps7_init.c/h from your
hw design to the u-boot if you want to use SPL.
Oops, I forgot to mention this.
I did that.
ok. Then I expect you are able to see at least u-boot SPL messages.
[1] Build u-boot
[2] Convert spl/u-boot-spl.bin into boot.bin
with BootGen tool
yes - or if you look at xilinx git u-boot repo we have one
simple python script which does this automatically without bootgen.
I found tools/zynq-boot-bin.py
Is this the one you mentioned?
yes that's the script - if you directly use that repo it is also
wired in Makefile that boot.bin is automatically created.
I have this on 2014.04 but I didn't validate this yet.
[3] Copy boot.bin to FAT-fomatted SD card.
yes.
I personally use SD boot mode it means boot.bin has just u-boot SPL
and u-boot.img on SD stores full u-boot.
On u-boot 2014.04 release, I don't know how to use full u-boot either.
This is what I am getting - u-boot.img has full u-boot.
U-Boot SPL 2014.01-00816-ge0c1813-dirty (Jan 22 2014 - 17:56:37)
mmc boot
reading download.bit
design filename = system.ncd;HW_TIMEOUT=FALSE;UserID=0x
part number = 7z020clg484
date = 2013/07/22
time = 17:18:11
bytes in bitstream = 4045564
zynq_load: Align buffer at 16c to 100(swap 1)
reading system.dtb
spl: error reading image system.dtb, err - -1
reading u-boot.img
reading u-boot.img
U-Boot 2014.01 (Mar 19 2014 - 08:12:51)
Memory: ECC disabled
DRAM: 1 GiB
MMC: zynq_sdhci: 0
SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16 MiB
*** Warning - bad CRC, using default environment
In:serial
Out: serial
Err: serial
Net: Gem.e000b000
U-BOOT for zynq-zc702
Gem.e000b000 Waiting for PHY auto negotiation to complete done
BOOTP broadcast 1
BOOTP broadcast 2
Abort
Hit any key to stop autoboot: 0
U-Boot-PetaLinux
Full u-boot image of zynq enables CONFIG_OF_SEPARATE, right?
I think u-boot.img does not include device tree.
In mainline yes but I am not using it. It is nice for playing
but it is fine just to disable it and you don't need to use dts at all.
Just disable it in zynq config file.
Should I combine u-boot.img and device tree by myself? Like this?
cat u-boot.img u-boot.dtb u-boot.img.tmp
mv u-boot.img.tmp u-boot.img
I am not sure if this will work because img is legacy u-boot format
with entry point and load address. That's why this will not work.
But OF also support to add DTB to hardcoded address but SPL has to be
fixed for that.
Or should I disable CONFIG_OF_SEPARATE?
That's what I am doing and that's what you can see in our xilinx git repo.
Keep in your mind that using U-BOOT SPL is not fully supported flow.
Supported flow is fsbl-u-boot-linux.
OK.
Maybe I should stick to the old flow.
It depends what you want to do. If you want to get just linux run
then just use images from wiki and change the kernel.
My question is, how to pass an init ramdisk?
I am using cpio compiled in directly in the kernel.
In which file-name should I copy init ramdisk
into SD card?
Xilinx OSL versions are using initramdisk
which you can download here.
http://www.wiki.xilinx.com/Zynq+2014.1+Release
Yes. I am using this.
ok. Then what are you trying to do? Just use latest u-boot?
How should I load the init ramdisk from the SD card?
And this is the command which OSL version are using.
sdboot=if mmcinfo; then \
run uenvboot; \
echo Copying Linux from SD to RAM... \
fatload mmc 0 0x300 ${kernel_image} \
fatload mmc 0 0x2A0 ${devicetree_image} \
fatload mmc 0 0x200 ${ramdisk_image} \
bootm 0x300 0x200 0x2A0; \
fi\0 \
Yes. I know this works.
But in my understanding, SPL cannot use this command.
My question is how SPL can load the init ramdisk.
It looks like spl_load_image_fat_os() function loads
system.dtb and uImage.
But I could not find which code loads ramdisk.
Not supported yet?
yes, I think it is not supported.
I haven't had a time but Simon mentioned that they have
enabled ITS format in SPL and it should be straight forward
to do so. Then you can just use full ITS instead of DTB, kernel, ramdisk
in separate images.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
signature.asc
Description: OpenPGP digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board
Hi Masahiro, Although this is not directed to me, but perhaps I can help you out. I am working on zc702 board. Can you copy paste the content of your bif file that you use with bootgen to generate BOOT.BIN file? Thanks and regards, Heshsham On 30 April 2014 15:24, Masahiro Yamada yamad...@jp.panasonic.com wrote: Hi Michal, I am a user of Zynq ZC-706 board. On u-boot 2014.01 release, I put Kernel Image, Device Tree, Ramdisk into fit.itb and I could successfully boot Linux Kernel. But I don't know how to boot Kernel on u-boot 2014.04 release. Please help! The default boot sequence of Zynq on the u-boot-2014.04 release is Falcon boot, right? I am trying to boot Linux with - U-boot 2014.04 - Linux Kernel 3.14 - SD boot mode - ZC706 board What I did is roughly like this: ## U-Boot ## [1] Build u-boot [2] Convert spl/u-boot-spl.bin into boot.bin with BootGen tool [3] Copy boot.bin to FAT-fomatted SD card. ##Kernel ## [1] Build kernel with multi_v7_defconfig setting [2] Copy uImage to the SD card [3] Rename zynq-zc706.dtb into system.dtb and copy to SD card Kernel boot failed to mount the root device. My question is, how to pass an init ramdisk? In which file-name should I copy init ramdisk into SD card? How should I load the init ramdisk from the SD card? Best Regards Masahiro Yamada ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
