Re: [U-Boot] [linux-sunxi] [PATCH v5] sun8i: h3: Add support for the Beelink-x2 STB
Hi Marcus, On Sun, 26 May 2019 at 16:57, wrote: > > From: Marcus Cooper > > The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot, > 2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the > SoC's integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver, a > dual colour LED and an optical S/PDIF connector. > > Signed-off-by: Marcus Cooper > --- > Changes in v5: > - Corrected DRAM Clock to what is reported on Android boot > - Removed support for SY8106A regulator > - Set CONFIG_SPL_TEXT_BASE which is now required. > > Changes in v4: > - updated dts to reflex current linux kernel status > > Changes in v3: > - Removed incorrect commit author > - Included v1-v2 change info > > Changes in v2: > - updated dts to reflex current linux kernel status > --- > arch/arm/dts/Makefile| 1 + > arch/arm/dts/sun8i-h3-beelink-x2.dts | 216 +++ > board/sunxi/MAINTAINERS | 5 + > configs/beelink_x2_defconfig | 18 +++ > 4 files changed, 240 insertions(+) > create mode 100644 arch/arm/dts/sun8i-h3-beelink-x2.dts > create mode 100644 configs/beelink_x2_defconfig > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 83058c4452..716108dd2e 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -472,6 +472,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ > sun8i-h2-plus-orangepi-r1.dtb \ > sun8i-h2-plus-orangepi-zero.dtb \ > sun8i-h3-bananapi-m2-plus.dtb \ > + sun8i-h3-beelink-x2.dtb \ > sun8i-h3-libretech-all-h3-cc.dtb \ > sun8i-h3-nanopi-m1.dtb \ > sun8i-h3-nanopi-m1-plus.dtb \ > diff --git a/arch/arm/dts/sun8i-h3-beelink-x2.dts > b/arch/arm/dts/sun8i-h3-beelink-x2.dts > new file mode 100644 > index 00..25540b7694 > --- /dev/null > +++ b/arch/arm/dts/sun8i-h3-beelink-x2.dts > @@ -0,0 +1,216 @@ > +/* > + * Copyright (C) 2017 Marcus Cooper > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include "sun8i-h3.dtsi" > +#include "sunxi-common-regulators.dtsi" > + > +#include > +#include > + > +/ { > + model = "Beelink X2"; > + compatible = "roofull,beelink-x2", "allwinner,sun8i-h3"; > + > + aliases { > + serial0 = &uart0; > + ethernet0 = &emac; > + ethernet1 = &sdiowifi; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + blue { > + label = "beelink-x2:blue:pwr"; > + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /
Re: [U-Boot] [linux-sunxi] [PATCH v5] sun8i: h3: Add support for the Beelink-x2 STB
On Mon, 27 May 2019 at 09:30, Clément Péron wrote: > > Hi Marcus, > > On Sun, 26 May 2019 at 16:57, wrote: > > > > From: Marcus Cooper > > > > The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot, > > 2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the > > SoC's integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver, a > > dual colour LED and an optical S/PDIF connector. > > > > Signed-off-by: Marcus Cooper > > --- > > Changes in v5: > > - Corrected DRAM Clock to what is reported on Android boot > > - Removed support for SY8106A regulator > > - Set CONFIG_SPL_TEXT_BASE which is now required. > > > > Changes in v4: > > - updated dts to reflex current linux kernel status > > > > Changes in v3: > > - Removed incorrect commit author > > - Included v1-v2 change info > > > > Changes in v2: > > - updated dts to reflex current linux kernel status > > --- > > arch/arm/dts/Makefile| 1 + > > arch/arm/dts/sun8i-h3-beelink-x2.dts | 216 +++ > > board/sunxi/MAINTAINERS | 5 + > > configs/beelink_x2_defconfig | 18 +++ > > 4 files changed, 240 insertions(+) > > create mode 100644 arch/arm/dts/sun8i-h3-beelink-x2.dts > > create mode 100644 configs/beelink_x2_defconfig > > > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > > index 83058c4452..716108dd2e 100644 > > --- a/arch/arm/dts/Makefile > > +++ b/arch/arm/dts/Makefile > > @@ -472,6 +472,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ > > sun8i-h2-plus-orangepi-r1.dtb \ > > sun8i-h2-plus-orangepi-zero.dtb \ > > sun8i-h3-bananapi-m2-plus.dtb \ > > + sun8i-h3-beelink-x2.dtb \ > > sun8i-h3-libretech-all-h3-cc.dtb \ > > sun8i-h3-nanopi-m1.dtb \ > > sun8i-h3-nanopi-m1-plus.dtb \ > > diff --git a/arch/arm/dts/sun8i-h3-beelink-x2.dts > > b/arch/arm/dts/sun8i-h3-beelink-x2.dts > > new file mode 100644 > > index 00..25540b7694 > > --- /dev/null > > +++ b/arch/arm/dts/sun8i-h3-beelink-x2.dts > > @@ -0,0 +1,216 @@ > > +/* > > + * Copyright (C) 2017 Marcus Cooper > > + * > > + * This file is dual-licensed: you can use it either under the terms > > + * of the GPL or the X11 license, at your option. Note that this dual > > + * licensing only applies to this file, and not this project as a > > + * whole. > > + * > > + * a) This file is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation; either version 2 of the > > + * License, or (at your option) any later version. > > + * > > + * This file is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * Or, alternatively, > > + * > > + * b) Permission is hereby granted, free of charge, to any person > > + * obtaining a copy of this software and associated documentation > > + * files (the "Software"), to deal in the Software without > > + * restriction, including without limitation the rights to use, > > + * copy, modify, merge, publish, distribute, sublicense, and/or > > + * sell copies of the Software, and to permit persons to whom the > > + * Software is furnished to do so, subject to the following > > + * conditions: > > + * > > + * The above copyright notice and this permission notice shall be > > + * included in all copies or substantial portions of the Software. > > + * > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > > + * OTHER DEALINGS IN THE SOFTWARE. > > + */ > > + > > +/dts-v1/; > > +#include "sun8i-h3.dtsi" > > +#include "sunxi-common-regulators.dtsi" > > + > > +#include > > +#include > > + > > +/ { > > + model = "Beelink X2"; > > + compatible = "roofull,beelink-x2", "allwinner,sun8i-h3"; > > + > > + aliases { > > + serial0 = &uart0; > > + ethernet0 = &emac; > > + ethernet1 = &sdiowifi; > > + }; > > + > > + chosen { > > + stdout-path = "serial0:115200n8"; > > + }; > > + > > + connector { > > + compatible = "hdmi-connector"; > > + type = "a"; > > + > > + port { > > + hdmi_con_in: endpoint { > > + remote-endpoi