Re: [U-Boot] Building imximage for mx53ard board, supporting NAND and YAFFS2
On 3/6/12, Bud Miljkovic bud_miljko...@trimble.com wrote: However, I would want to initially boot from SD-card and I would like to be able to generate an imx image of the u-boot when running make. Booting from SD card was the only boot method I tested on mx53ard in mainline U-boot. All you need to do is: make mx53ard_config make u-boot.imx Then flash u-boot.imx into the SD card as per instructions from doc/README.imximage Booting from NAND I haven't tested, but the procedure to generate u-boot.imx is the same. Please note that the boot from NAND relies on the mx53 ROM. If you need to store environment variables in NAND, for example, then you would need to add support for mx5 nand driver. Regards, Fabio Estevam ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Building imximage for mx53ard board, supporting NAND and YAFFS2
Hi Fabio, I understand, from the MAINTAINERS file list, that you are the maintainer for the mx53ard board. I took a copy of the u-boot sources for the Freescale SABRE Automotive Infotainment board (aka mx53ard board) from the Freescale site. As the result I got the u-boot-2009.08 building tree directory along with the associated cross compiler gcc-4.4.4-glibc-2.11.1-multilib-1.0-1.386 tools. After some trial and error I managed to configure the mx53_ard_dd3.h for NAND and YAFFS2 support and successfully ran make, resulting in creation of the following files: * u-boot * u-boot.bin * u-boot.srec * u-boot.map * u-boot.lds However, I would want to initially boot from SD-card and I would like to be able to generate an imx image of the u-boot when running make. I looked at the Makefile from the Freescale release of u-boot-2009.08 and saw that it is fairly outdated - it does not support making of u-boot.imx image. At the same time I see that the general denx distribution (u-boot-2011.12) of u-boot sources does have the support for making u-boot.imx image in its Makefile. So I am wondering if a patch that can be applied to the u-boot-2009.08 Freescale u-boot source that will bring the make tools up to date and able to make u-boot.imx file does exist? Failing that, is there another way to configure the denx u-boot-2011.12 release to support NAND and YAFFS2 and thus, by successfully compiling, generate a u-boot.imx image file. Cheers, Bud Miljkovic ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Building imximage for mx53ard board, supporting NAND and YAFFS2
On 06.03.2012 04:13, Bud Miljkovic wrote: Hi Fabio, I understand, from the MAINTAINERS file list, that you are the maintainer for the mx53ard board. I took a copy of the u-boot sources for the Freescale SABRE Automotive Infotainment board (aka mx53ard board) from the Freescale site. As the result I got the u-boot-2009.08 building tree directory along with the associated cross compiler gcc-4.4.4-glibc-2.11.1-multilib-1.0-1.386 tools. After some trial and error I managed to configure the mx53_ard_dd3.h for NAND and YAFFS2 support and successfully ran make, resulting in creation of the following files: * u-boot * u-boot.bin * u-boot.srec * u-boot.map * u-boot.lds However, I would want to initially boot from SD-card and I would like to be able to generate an imx image of the u-boot when running make. I looked at the Makefile from the Freescale release of u-boot-2009.08 and saw that it is fairly outdated - it does not support making of u-boot.imx image. At the same time I see that the general denx distribution (u-boot-2011.12) of u-boot sources does have the support for making u-boot.imx image in its Makefile. So I am wondering if a patch that can be applied to the u-boot-2009.08 Freescale u-boot source that will bring the make tools up to date and able to make u-boot.imx file does exist? Using the Freescale 2009.08 U-Boot, you have everything you need with the generated u-boot.bin. Or in other words: The Freescale U-Boot u-boot.bin is from (SD) header point of view the same like the mainline u-boot.imx. Or in other words: The Freescale U-Boot uses the compiler/assembler to generate the header (see the file flash_header.S). The mainline U-Boot uses the mkimage/imximage tool *after* the u-boot.bin is generated to put the correct header in front of the u-boot.bin resulting in u-boot.imx. I.e. the Freescale U-Boot does everything in one step with the compiler/assembler, the mainline U-Boot does the same in two steps with an extra tool. Best regards Dirk ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
