Re: [U-Boot] Linux does not boot from flash, but will from RAM

2008-10-22 Thread Ricardo 
Hello Tom

   Sorry for the late late reply, but you mail was hidden in my inbox.
I have been the developer of the avnet v5fx30eval patch for u-boot. I
have that board correctly running linux 2.6.27 from the latest paulus
git patch.  In order to use the ll_temac I have used a modified
version of the xilinx driver.

   On the final design I am running this command to run linux: bootm
0xff20 0xff9a 0xff7eTry placing your data on that
areas.

   If you need more info please ask


   Best regards


BTW: Please add me to the cc next time.




On Thu, Oct 9, 2008 at 15:35, Curran, Tom [EMAIL PROTECTED] wrote:
 I am using u-boot on the Avnet V5FX30T (Xilinx FPGA, PPC440) eval board
 to boot a Linux 2.6.27-rc4 kernel.  I can use u-boot to tftp the kernel,
 ramdisk, and device tree blob to RAM and boot from there OK.  I copied
 the kernel, ramdisk and blob to flash and verified those elements were
 programmed in flash correctly with 'iminfo', but when I try to boot from
 flash the boot process hangs at Loading Ramdisk to 03d59000, end
 03ec8f20 ... OK.  At this point u-boot will restart (after a
 WDT-induced reset?) after a few minutes.  Interestingly enough, I can
 boot from flash IF the ramdisk is already in RAM with a bootm
 $(kernel_flash_addr) $(ramdisk_ram_addr) $(blob_flash_addr).  This
 leads me to believe something is going wrong in the copying of the
 ramdisk from flash to RAM.  Perhaps I am doing something wrong or missed
 a step somewhere?  I have read the FAQ, but have not found anything
 relevant.  Perhaps someone here has had this problem too and can offer a
 solution?  Any help is appreciated.  Many thanks in advance!

 --Tom
 ___
 U-Boot mailing list
 U-Boot@lists.denx.de
 http://lists.denx.de/mailman/listinfo/u-boot




-- 
Ricardo Ribalda
http://www.eps.uam.es/~rribalda/
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] Linux does not boot from flash, but will from RAM

2008-10-09 Thread Curran, Tom 
I am using u-boot on the Avnet V5FX30T (Xilinx FPGA, PPC440) eval board
to boot a Linux 2.6.27-rc4 kernel.  I can use u-boot to tftp the kernel,
ramdisk, and device tree blob to RAM and boot from there OK.  I copied
the kernel, ramdisk and blob to flash and verified those elements were
programmed in flash correctly with 'iminfo', but when I try to boot from
flash the boot process hangs at Loading Ramdisk to 03d59000, end
03ec8f20 ... OK.  At this point u-boot will restart (after a
WDT-induced reset?) after a few minutes.  Interestingly enough, I can
boot from flash IF the ramdisk is already in RAM with a bootm
$(kernel_flash_addr) $(ramdisk_ram_addr) $(blob_flash_addr).  This
leads me to believe something is going wrong in the copying of the
ramdisk from flash to RAM.  Perhaps I am doing something wrong or missed
a step somewhere?  I have read the FAQ, but have not found anything
relevant.  Perhaps someone here has had this problem too and can offer a
solution?  Any help is appreciated.  Many thanks in advance!

--Tom
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] Linux does not boot from flash, but will from RAM

2008-10-09 Thread Jerry Van Baren 
Curran, Tom wrote:
 I am using u-boot on the Avnet V5FX30T (Xilinx FPGA, PPC440) eval board
 to boot a Linux 2.6.27-rc4 kernel.  I can use u-boot to tftp the kernel,
 ramdisk, and device tree blob to RAM and boot from there OK.  I copied
 the kernel, ramdisk and blob to flash and verified those elements were
 programmed in flash correctly with 'iminfo', but when I try to boot from
 flash the boot process hangs at Loading Ramdisk to 03d59000, end
 03ec8f20 ... OK.  At this point u-boot will restart (after a
 WDT-induced reset?) after a few minutes.  Interestingly enough, I can
 boot from flash IF the ramdisk is already in RAM with a bootm
 $(kernel_flash_addr) $(ramdisk_ram_addr) $(blob_flash_addr).  This
 leads me to believe something is going wrong in the copying of the
 ramdisk from flash to RAM.  Perhaps I am doing something wrong or missed
 a step somewhere?  I have read the FAQ, but have not found anything
 relevant.  Perhaps someone here has had this problem too and can offer a
 solution?  Any help is appreciated.  Many thanks in advance!
 
 --Tom

Hi Tom,

Do you have *no* console output from linux with the ramdisk-in-flash 
version?  I assume you have normal console diarrhea when the ramdisk is 
in ram.  Is linux booting at all?  If your console output isn't 
outputting, it is hard to tell the difference between crashing before 
linux even starts or something much less fatal like the ramdisk not 
mounting properly (rebooting in 180 seconds...).

Can you look in the linux debug output buffer in memory in the failed 
boot?  Find the symbol log_buf in the map file System.map. This will be 
a virtual address, e.g. c013c494 b log_buf . Drop the first nibble to 
get the physical address, e.g. 0x0013c494. Dump this area of memory to 
find what was sent to the system log before the crash.

What happens if you load your ramdisk into ram at 03d59000 (like your 
failed boot) rather than whatever $(ramdisk_ram_addr) is?

Best regards,
gvb

P.S. You should use curly braces ${variable} rather than $(variable).
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot