Re: [U-Boot] Please pull u-boot-x86.git
On Wed, Oct 21, 2015 at 05:15:17PM -0600, Simon Glass wrote: > Hi Tom, > > This includes support for booting VxWorks, the Advantech SOM-6896, MRC > fixes (speeds up boot), expanded video support and some debug UART > improvements. > > > The following changes since commit 5ec0003b19cbdf06ccd6941237cbc0d1c3468e2d: > > Prepare v2015.10 (2015-10-19 19:59:38 -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-x86.git > > for you to fetch changes up to e0ae64880b61fdeaf261fddd747efa80fa53d386: > > x86: Add support for Advantech SOM-6896 (2015-10-21 16:29:27 -0600) > Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, This includes support for booting VxWorks, the Advantech SOM-6896, MRC fixes (speeds up boot), expanded video support and some debug UART improvements. The following changes since commit 5ec0003b19cbdf06ccd6941237cbc0d1c3468e2d: Prepare v2015.10 (2015-10-19 19:59:38 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to e0ae64880b61fdeaf261fddd747efa80fa53d386: x86: Add support for Advantech SOM-6896 (2015-10-21 16:29:27 -0600) Bin Meng (41): pci: Set PCI_COMMAND_IO bit for VGA device video: vesa_fb: Fix wrong return value check of pci_find_class() dm: pci: Fix pci_last_busno() to return the real last bus no dm: pci: Enable VGA address forwarding on bridges x86: ivybridge: Remove the dead codes that programs pci bridge x86: Allow disabling IGD on Intel Queensbay x86: Initialize GDT entry 1 to be the 32-bit CS as well x86: Move install_e820_map() out of zimage.c x86: Remove quotation mark in CONFIG_HOSTNAME cmd: Convert CONFIG_CMD_ELF to Kconfig cmd: Clean up cmd_elf a little bit cmd: elf: Reorder load_elf_image_phdr() and load_elf_image_shdr() cmd: bootvx: Avoid strlen() calls when constructing VxWorks bootline cmd: bootvx: Pass netmask and gatewayip to VxWorks bootline cmd: bootvx: Always get VxWorks bootline from env cmd: bootvx: Pass E820 information to an x86 VxWorks kernel cmd: bootvx: Add asmlinkage to the VxWorks x86 entry doc: Complement document about booting VxWorks Makefile: Generate U_BOOT_DMI_DATE for SMBIOS x86: Add SMBIOS table support x86: fsp: Compact the output of hob command x86: fsp: Print GUID whenever applicable in the hob command output x86: fsp: Make hob command a sub-command to fsp x86: fsp: Add a hdr sub-command to show header information x86: Add ENABLE_MRC_CACHE Kconfig option x86: Move mrccache.[c|h] to a common place x86: Do sanity test on the cache record in mrccache_update() x86: Add various minor tidy-ups in mrccache codes x86: Add more common routines to manipulate mrc cache x86: ivybridge: Use APIs provided in the mrccache lib x86: Use struct mrc_region to describe a mrc region x86: fsp: Pass mrc cache to fsp_init() and save it to gd after fsp_init() x86: baytrail: Save mrc cache to spi flash x86: Enable mrc cache for bayleybay and minnowmax x86: baytrail: Issue full system reset in reset_cpu() x86: Remove unused rw-mrc-cache properties in the link and panther dts files x86: ivybridge: Correct two typos for MRC x86: quark: Implement mrc cache x86: galileo: Enable mrc cache x86: Pass correct cpu_index to ap_init() x86: ivybridge: Enable the MRC cache George McCollister (3): x86: pci: Add PCI IDs for Wildcat Point x86: spi: Add support for Wildcat Point x86: Add support for Advantech SOM-6896 Simon Glass (16): malloc_simple: Add debug() information dm: pci: Tidy up auto-config error handling dm: pci: Correct a few debug() statements dm: pci: Adjust pci_find_and_bind_driver() to return -EPERM debug_uart: Adjust the declaration of debug_uart_init() debug_uart: Support board-specific UART initialisation debug_uart: Add an option to announce the debug UART x86: Init the debug UART if enabled x86: chromebook_link: Enable the debug UART rtc: mc146818: Add a comment to the #endif rtc: mc146818: Use probe() to set up the device dm: rtc: Correct rtc_read32() return value x86: ivybridge: Use 'ret' instead of 'rcode' x86: ivybridge: Check the RTC return value x86: ivybridge: Fix car_uninit() to correctly set run state x86: ivybridge: Measure the MRC code execution time Makefile| 2 + README | 12 +- arch/x86/Kconfig| 19 +++ arch/x86/cpu/baytrail/valleyview.c | 25 arch/x86/cpu/cpu.c | 7 +- arch/x86/cpu/ivybridge/Makefile | 1 - arch/x86/cpu/ivybridge/bd82x6x.c| 32 - arch/x86/cpu/ivybridge/car.S| 2 +- arch/x86/cpu/ivybridge/cpu.c| 7 + arch/x86/cpu/ivybridge/sdram.c | 162 +-- arch/x86/cpu/quark/dram.c | 52 +++- arch/x86/cpu/quark/quark.c | 19 +++ arch/x86/cpu/queensbay/Kconfig | 8 ++ arch/x86/cpu/queensbay/tnc.c| 19 +++ arch/x86/cpu/sipi_vector.S | 4 +- arch/x86/cpu/start.S| 11 +- arch/x86/dts/Makefile | 3 +-
Re: [U-Boot] Please pull u-boot-x86.git (take 2)
On Tue, Sep 29, 2015 at 09:20:53AM -0600, Simon Glass wrote: > Hi Tom. > > This include one more bug fix. > > The following changes since commit 1f8836396de8215b7f460616926052b32597bb29: > > Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-x86.git > > for you to fetch changes up to 196193a4d4963a8dde00c7cdd0ec83b60ea61e61: > > x86: fsp: Report correct number of E820 table entries (2015-09-28 > 21:56:27 -0700) > Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git (take 2)
Hi Tom. This include one more bug fix. The following changes since commit 1f8836396de8215b7f460616926052b32597bb29: Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 196193a4d4963a8dde00c7cdd0ec83b60ea61e61: x86: fsp: Report correct number of E820 table entries (2015-09-28 21:56:27 -0700) Bin Meng (1): x86: fsp: Report correct number of E820 table entries Simon Glass (1): x86: chromebook_link: Expand early malloc() memory arch/x86/lib/fsp/fsp_dram.c | 3 ++- configs/chromebook_link_defconfig | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Thu, Sep 10, 2015 at 03:50:36PM -0700, Simon Glass wrote: > Hi Tom, > > Here are a few more driver model PCI fixes, the tftp revert and some > driver model conversions for x86, as well as a few other minor fixes. > There are a few more patches in flight but I could not apply them due > to problems. I thought it best to get this out in the interim since > the hour is late. > > > The following changes since commit efde6a579fe3c172d214fb3047b02c827779738a: > > Prepare v2015.10-rc3 (2015-09-07 08:56:35 -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-x86.git > > for you to fetch changes up to f0dc73c090317c7d0660443bc933d612a4c0c699: > > net: designware: Fix build warnings (2015-09-09 07:48:03 -0600) > Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, Here are a few more driver model PCI fixes, the tftp revert and some driver model conversions for x86, as well as a few other minor fixes. There are a few more patches in flight but I could not apply them due to problems. I thought it best to get this out in the interim since the hour is late. The following changes since commit efde6a579fe3c172d214fb3047b02c827779738a: Prepare v2015.10-rc3 (2015-09-07 08:56:35 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to f0dc73c090317c7d0660443bc933d612a4c0c699: net: designware: Fix build warnings (2015-09-09 07:48:03 -0600) Bin Meng (21): x86: ifdtool: Support checking region overlap before U-Boot x86: doc: Change to use CONFIG_VGA_BIOS_ADDR x86: bayleybay: Change default vga bios rom address net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet" dm: eth: Do not print misleading "Net Initialization Skipped" dm: test: Add a new test case for dm_test_eth_rotate dm: eth: Correctly detect alias in eth_get_dev_by_name() x86: crownbay: Convert to use CONFIG_DM_USB x86: crownbay: Convert to use CONFIG_DM_ETH for E1000 net: pch_gbe: Convert to driver model net: pch_gbe: Add Kconfig option x86: crownbay: Enable CONFIG_PCH_GBE x86: coreboot: Convert to use more dm drivers x86: bayleybay: Convert to use more dm drivers x86: quark: Optimize MRC execution time x86: quark: Avoid chicken and egg problem x86: Enable PCIe controller on quark/galileo x86: Convert to use driver model pci on quark/galileo x86: quark: Add USB PHY initialization support x86: galileo: Convert to use CONFIG_DM_USB net: designware: Fix build warnings Masahiro Yamada (1): Revert "patman: use -D option for git format-patch" Simon Glass (3): x86: panther: Add PCI and video configuration buildman: Improve the config comparison feature dm: pci: Allow a PCI bus to be found without an alias arch/sandbox/dts/test.dts | 7 +++ arch/x86/cpu/coreboot/coreboot.c| 6 --- arch/x86/cpu/quark/Makefile | 1 - arch/x86/cpu/quark/msg_port.c | 44 arch/x86/cpu/quark/pci.c| 70 - arch/x86/cpu/quark/quark.c | 139 +--- arch/x86/dts/chromebox_panther.dts | 10 arch/x86/dts/galileo.dts| 8 ++- arch/x86/include/asm/arch-quark/quark.h | 85 ++ board/intel/bayleybay/bayleybay.c | 6 --- board/intel/crownbay/crownbay.c | 6 --- board/intel/galileo/galileo.c | 56 configs/bayleybay_defconfig | 5 +- configs/coreboot-x86_defconfig | 5 +- configs/crownbay_defconfig | 5 +- configs/galileo_defconfig | 3 ++ doc/README.x86 | 2 +- drivers/net/Kconfig | 13 + drivers/net/designware.c| 8 +-- drivers/net/pch_gbe.c | 133 +- drivers/net/pch_gbe.h | 2 - drivers/pci/pci-uclass.c| 28 -- include/configs/chromebox_panther.h | 2 + include/configs/crownbay.h | 4 -- include/configs/galileo.h | 12 - include/configs/sandbox.h | 3 +- include/netdev.h| 4 -- net/eth.c | 7 ++- net/tftp.c | 10 ++-- test/dm/eth.c | 5 ++ tools/buildman/builder.py | 186 + tools/ifdtool.c | 66 --- tools/patman/gitutil.py | 2 +- 33 files changed, 643 insertions(+), 300 deletions(-) delete mode 100644 arch/x86/cpu/quark/pci.c Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, The includes ACPI support for the first time and quite a few fixes: microcode for newer Minnowmax boards, coreboot booting, i8042 keyboard, Minnowmax GPIO and getting serial running on crownbay. It also includes the patch to fix the e1000 build warning. I put that first so that the brokenness is minimised. The following changes since commit 7d31c6ab83d8a5875875eda041c0a1e756189917: Merge git://git.denx.de/u-boot-pxa (2015-08-24 16:06:03 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to f4b5db7c5309dd7f3ecc6369f3c1f41e8bfe93ae: dm: pci: Document binding of pci device drivers (2015-08-26 07:54:18 -0700) Bin Meng (36): net: e1000: Fix build warnings for 32-bit x86: doc: Update coreboot payload entry point address x86: coreboot: Increase memrange entry number to 32 x86: coreboot: Correctly report E820 types x86: Remove calculate_relocation_address() x86: coreboot: Allow =4GiB memory bank size x86: kconfig: Hide System tables for EFI x86: kconfig: Hide System tables for coreboot x86: Only include cbfs command for coreboot x86: Enable CONFIG_PCI_CONFIG_HOST_BRIDGE for all boards video: coreboot: Save VESA mode for future use x86: Set up video framebuffer for coreboot before loading kernel efi: Update README.efi to clarify build and test instructions x86: baytrail: Add microcode for BayTrail-I D0 stepping x86: baytrail: Support multiple microcode copies dm: pci: Support selected device/driver binding before relocation x86: fsp: Delay x86_fsp_init() call a little bit x86: fsp: Enlarge the size of malloc() pool before relocation x86: fsp: Add comments about U-Boot entering start.S twice x86: queensbay: Move unprotect_spi_flash() to arch_misc_init() x86: baytrail: Remove the fsp_init_phase_pci() call x86: fsp: Call fsp_init_phase_pci() in pci_uclass_post_probe() x86: superio: Add keyboard controller support to smsc_lpc47m driver fdtdec: Fix possible infinite loop in fdtdec_get_pci_vendev() dm: pci: Save devfn without bus number in pci_uclass_child_post_bind() x86: i8042: Remove unused codes x86: i8042: Reorder static functions x86: i8042: Clean up the driver per coding convention x86: i8042: Correctly initialize the controller video: cfb_console: Allow VGA device to work without i8042 keyboard x86: crownbay: Enable on-board SMSC superio keyboard controller video: ct69000: Remove unused codes dm: pci: Optimize pci_uclass_post_bind() dm: core: Fix code reentrancy issue in device_probe_child() x86: crownbay: Support Topcliff integrated pci uart devices with driver model dm: pci: Document binding of pci device drivers Masahiro Yamada (1): patman: use -D option for git format-patch Saket Sinha (3): x86: Generate a valid ACPI table x86: Add ACPI table support to QEMU x86: Add DSDT table for supporting ACPI on QEMU Simon Glass (10): x86: Correct microcode documentation x86: ifdtool: Check that U-Boot does not overlap other regions x86: ifdtool: Split microcode linking into its own function x86: ifdtool: Support collating microcode into one place x86: ifdtool: Drop microcode from the device tree when collating x86: minnowmax: Add access to GPIOs E0, E1, E2 dm: pci: Add a comment to help find pci_hose_read_config_byte, etc. x86: minnowmax: Correct pad-offset value for host_en1 x86: gpio: Correct calls to _ich6_gpio_set_direction() x86: gpio: Tidy up gpio_ich6_get_base() and callers Makefile |1 + arch/x86/Kconfig | 22 +- arch/x86/cpu/baytrail/valleyview.c |8 +- arch/x86/cpu/coreboot/sdram.c| 33 +- arch/x86/cpu/qemu/Makefile |1 + arch/x86/cpu/qemu/acpi.c | 176 + arch/x86/cpu/qemu/acpi/cpu-hotplug.asl | 80 +++ arch/x86/cpu/qemu/acpi/dbug.asl | 25 + arch/x86/cpu/qemu/acpi/hpet.asl | 31 + arch/x86/cpu/qemu/acpi/isa.asl | 102 +++ arch/x86/cpu/qemu/acpi/pci-crs.asl | 61 ++ arch/x86/cpu/qemu/dsdt.asl | 412 arch/x86/cpu/queensbay/tnc.c |4 +- arch/x86/cpu/start.S | 14 +- arch/x86/dts/bayleybay.dts |6 + arch/x86/dts/crownbay.dts| 17 +- arch/x86/dts/microcode/m0130679901.dtsi | 3284 ++ arch/x86/dts/minnowmax.dts | 32 +- arch/x86/include/asm/acpi_table.h| 393
Re: [U-Boot] Please pull u-boot-x86.git
On Wed, Aug 26, 2015 at 02:26:03PM -0700, Simon Glass wrote: Hi Tom, The includes ACPI support for the first time and quite a few fixes: microcode for newer Minnowmax boards, coreboot booting, i8042 keyboard, Minnowmax GPIO and getting serial running on crownbay. It also includes the patch to fix the e1000 build warning. I put that first so that the brokenness is minimised. The following changes since commit 7d31c6ab83d8a5875875eda041c0a1e756189917: Merge git://git.denx.de/u-boot-pxa (2015-08-24 16:06:03 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to f4b5db7c5309dd7f3ecc6369f3c1f41e8bfe93ae: dm: pci: Document binding of pci device drivers (2015-08-26 07:54:18 -0700) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Fri, Aug 14, 2015 at 10:57:59AM -0600, Simon Glass wrote: Hi Tom, This includes various fixes including moving x86 over to use board_init_f_mem() and proper interrupt support on minnowmax. The revert of fdtdec_get_addr_size() is here also. Stephen confirmed it will not affect 64-bit Tegra. Due to problems with Stephen's latest patch (actually more likely problems in the callers!) I need to do more investigation before applying that. The following changes since commit bbc1b99e8b8a1b87c2d0d959a1fcd1990abe82dd: ARM: tegra: represent RAM in 1 or 2 banks (2015-08-13 13:06:04 -0700) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 236efe36be6d1c544f9477f10fdf38a17cd7a869: Revert fdt: Fix fdtdec_get_addr_size() for 64-bit (2015-08-14 10:00:52 -0600) (I thought I sent this already but there's a copy in my drafts..) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, This includes various fixes including moving x86 over to use board_init_f_mem() and proper interrupt support on minnowmax. The revert of fdtdec_get_addr_size() is here also. Stephen confirmed it will not affect 64-bit Tegra. Due to problems with Stephen's latest patch (actually more likely problems in the callers!) I need to do more investigation before applying that. The following changes since commit bbc1b99e8b8a1b87c2d0d959a1fcd1990abe82dd: ARM: tegra: represent RAM in 1 or 2 banks (2015-08-13 13:06:04 -0700) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 236efe36be6d1c544f9477f10fdf38a17cd7a869: Revert fdt: Fix fdtdec_get_addr_size() for 64-bit (2015-08-14 10:00:52 -0600) Andrew Bradford (1): x86: baytrail: Configure FSP UPD from device tree Bin Meng (5): common: Display =4GiB memory bank size x86: baytrail: Add all IDE/SATA PCI device IDs x86: fsp: Do not assert VPD_IMAGE_REV when DEBUG video: vesa: Correct a typo in the Kconfig VESA mode string x86: Set APs' req_seq to the reg number from device tree Simon Glass (22): dm: pci: Provide friendly config access functions dm: pci: Add a way to iterate through all PCI devices x86: Re-order efi-x86_defconfig x86: Tidy up the PIRQ routing code a little x86: Split out fsp_init_phase_pci() code into a new function x86: Allow pirq_init() to return an error x86: baytrail: Tidy up interrupt and FSP init x86: baytrail: Support running as an EFI payload x86: Remove init_gd() function Align global_data to a 16-byte boundary Allow arch-specific setting of global_data in board_init_f_mem() x86: Move the GDT into global_data x86: Switch to using generic global_data setup Revert dm: pci: Allow scan bridge child devices before relocation x86: Convert minnowmax to use CONFIG_DM_USB x86: Convert minnowmax to use CONFIG_DM_NET x86: Show the un-relocated IP address in exceptions x86: Drop FSP error defines and use EFI instead x86: Return -1 when reading a PCI config register fails x86: minnowmax: Define and enable interrupt setup x86: Add a simple interrupt script to the README Revert fdt: Fix fdtdec_get_addr_size() for 64-bit Stoppa, Igor (1): x86: Add clarifications to the x86 README arch/x86/cpu/baytrail/fsp_configs.c | 162 +++-- arch/x86/cpu/baytrail/valleyview.c | 11 +++- arch/x86/cpu/cpu.c | 11 ++-- arch/x86/cpu/interrupts.c| 2 + arch/x86/cpu/irq.c | 58 --- arch/x86/cpu/mp_init.c | 7 +++ arch/x86/cpu/pci.c | 9 ++- arch/x86/cpu/qemu/qemu.c | 4 +- arch/x86/cpu/quark/quark.c | 4 +- arch/x86/cpu/queensbay/tnc.c | 4 +- arch/x86/cpu/start.S | 95 +-- arch/x86/dts/bayleybay.dts | 38 + arch/x86/dts/minnowmax.dts | 125 - arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h | 1 - arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h| 1 - arch/x86/include/asm/fsp/fsp_support.h | 7 +++ arch/x86/include/asm/fsp/fsp_types.h | 11 arch/x86/include/asm/global_data.h | 4 +- arch/x86/include/asm/irq.h | 4 +- arch/x86/include/asm/u-boot-x86.h| 1 - arch/x86/lib/fsp/fsp_common.c| 13 +++-- arch/x86/lib/fsp/fsp_support.c | 3 +- board/intel/minnowmax/minnowmax.c| 6 -- common/board_f.c | 20 +-- configs/efi-x86_defconfig| 10 ++-- configs/minnowmax_defconfig | 13 +++-- doc/README.x86 | 47 doc/device-tree-bindings/misc/intel,baytrail-fsp.txt | 158 +++ drivers/pci/pci-uclass.c | 140 + drivers/video/Kconfig| 2 +- include/asm-generic/global_data.h| 3 +- include/asm-generic/u-boot.h | 4 +- include/common.h | 43 ++ include/configs/bayleybay.h | 3 +- include/configs/minnowmax.h | 7 ++- include/fdtdec.h
Re: [U-Boot] Please pull u-boot-x86.git branch sandbox (take 2a)
On Sun, Apr 19, 2015 at 08:26:01PM -0600, Simon Glass wrote: Hi Tom, I've rebased on master and built again. Note this is branch 'sandbox'. The following changes since commit b8d7652c81689a69bc6eaa206cf875bbe632831c: Merge branch 'buildman' of git://git.denx.de/u-boot-x86 (2015-04-18 19:24:13 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to 791a9f67f4f8db512cf59b40f47544fb335cd8db: sandbox: add config_distro_defaults and config_distro_bootcmd (2015-04-19 14:45:58 -0600) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch buildman
On Sat, Apr 18, 2015 at 04:23:42PM -0600, Simon Glass wrote: Hi Tom, Here are the queued-up buildman/patman patches, including the new CONFIG comparison feature (remember to build with -C if using it). Note these are in branch 'buildman'. The following changes since commit 5ab83ec1a13601c4f76ce009afe0d1ee51f1ad9c: sandbox: exynos: Move CONFIG_SOUND_SANDBOX to Kconfig (2015-04-13 20:53:47 -0600) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to 9194e3c1c0d6031ff84e1dd63c401dc76a990876: patman: cover letter shows like 00/xx if more than 10 patches (2015-04-18 16:14:27 -0600) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch sandbox (take 2a)
Hi Tom, I've rebased on master and built again. Note this is branch 'sandbox'. The following changes since commit b8d7652c81689a69bc6eaa206cf875bbe632831c: Merge branch 'buildman' of git://git.denx.de/u-boot-x86 (2015-04-18 19:24:13 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to 791a9f67f4f8db512cf59b40f47544fb335cd8db: sandbox: add config_distro_defaults and config_distro_bootcmd (2015-04-19 14:45:58 -0600) Sjoerd Simons (9): sandbox: only do sandboxfs for hostfs interface sandbox: Split bootm code out into lib/bootm sandbox: Add support for bootz sandbox: Renamed sb command to host sandbox: Implement host dev [device] config_distro_bootcmd.h: Add shared block definition for the host interface pxe: Ensure all memory access is to mapped memory config: Add default client arch defines for intel architectures sandbox: add config_distro_defaults and config_distro_bootcmd arch/sandbox/cpu/cpu.c | 12 - arch/sandbox/lib/Makefile| 1 + arch/sandbox/lib/bootm.c | 63 common/Makefile | 2 +- common/cmd_host.c| 175 + common/cmd_pxe.c | 86 +--- common/cmd_sandbox.c | 126 --- fs/sandbox/sandboxfs.c | 6 ++- include/config_distro_bootcmd.h | 13 + include/config_distro_defaults.h | 4 ++ include/configs/sandbox.h| 31 +--- 11 files changed, 341 insertions(+), 178 deletions(-) create mode 100644 arch/sandbox/lib/bootm.c create mode 100644 common/cmd_host.c delete mode 100644 common/cmd_sandbox.c Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch buildman
Hi Tom, Here are the queued-up buildman/patman patches, including the new CONFIG comparison feature (remember to build with -C if using it). Note these are in branch 'buildman'. The following changes since commit 5ab83ec1a13601c4f76ce009afe0d1ee51f1ad9c: sandbox: exynos: Move CONFIG_SOUND_SANDBOX to Kconfig (2015-04-13 20:53:47 -0600) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to 9194e3c1c0d6031ff84e1dd63c401dc76a990876: patman: cover letter shows like 00/xx if more than 10 patches (2015-04-18 16:14:27 -0600) Simon Glass (5): Create a .cfg file containing the CONFIG options used to build buildman: Show 'make' command line when -V is used buildman: Adjust the 'aborted' heuristic for writing output buildman: Store build config files buildman: Allow comparison of build configuration Tom Rini (2): buildman: Keep more outputs with the --keep-outputs flag buildman: Make -V (verbose_build) really be verbose Wu, Josh (1): patman: cover letter shows like 00/xx if more than 10 patches Makefile| 10 +++- scripts/Makefile.spl| 9 +++- tools/buildman/builder.py | 185 ++- tools/buildman/builderthread.py | 65 +++- tools/buildman/cmdline.py | 4 +- tools/buildman/control.py | 3 +- tools/patman/patchstream.py | 7 ++- 7 files changed, 250 insertions(+), 33 deletions(-) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Wed, Mar 25, 2015 at 04:33:00PM -0600, Simon Glass wrote: Hi Tom, These are improvements to a new board and some code clean-ups that I requested, so I think it is probably reasonable to take these now. The following changes since commit b81bdf62e0cf9b5c64d30284d01658a851f142f7: bav335x: Update defconfigs and fix typo in EEPROM config format (2015-03-24 10:56:35 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to 6f1eba49a558421e3fcb06ab0addc12b9a3804c6: x86: Add ramboot and nfsboot commands in x86-common.h (2015-03-24 21:22:38 -0600) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, These are improvements to a new board and some code clean-ups that I requested, so I think it is probably reasonable to take these now. The following changes since commit b81bdf62e0cf9b5c64d30284d01658a851f142f7: bav335x: Update defconfigs and fix typo in EEPROM config format (2015-03-24 10:56:35 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to 6f1eba49a558421e3fcb06ab0addc12b9a3804c6: x86: Add ramboot and nfsboot commands in x86-common.h (2015-03-24 21:22:38 -0600) Bin Meng (11): x86: quark: MRC codes clean up fdtdec: Improve fdtdec_get_pci_bdf() documentation x86: Add queensbay fsp patch information in README.x86 x86: quark: Enable on-chip ethernet controllers net: Add ethernet FCS length macro in net.h net: Update README.drivers.eth to mention latest APIs net: Add Intel Topcliff GMAC driver x86: crownbay: Enable Intel Topcliff GMAC support x86: crownbay: Enable saving environment in SPI flash x86: galileo: Enable saving environment in SPI flash x86: Add ramboot and nfsboot commands in x86-common.h Tom Rini (1): arch/x86/cpu/quark/mrc.c: Switch to U_BOOT_DATE / U_BOOT_TIME arch/x86/cpu/quark/hte.c | 74 arch/x86/cpu/quark/hte.h |4 +- arch/x86/cpu/quark/mrc.c | 15 +- arch/x86/cpu/quark/mrc_util.c | 326 arch/x86/cpu/quark/mrc_util.h | 34 arch/x86/cpu/quark/quark.c| 19 ++ arch/x86/cpu/quark/smc.c | 1205 --- arch/x86/cpu/quark/smc.h | 349 ++- doc/README.drivers.eth| 51 +++-- doc/README.x86|7 + drivers/net/Makefile |1 + drivers/net/e1000.h |7 +- drivers/net/pch_gbe.c | 466 ++ drivers/net/pch_gbe.h | 300 ++ drivers/usb/gadget/ether.c|1 - drivers/usb/gadget/rndis.c|1 - include/configs/crownbay.h| 12 ++ include/configs/galileo.h | 13 ++ include/configs/x86-common.h | 31 +++- include/fdtdec.h |5 +- include/net.h |2 + include/netdev.h |4 + include/usb_ether.h |1 - 23 files changed, 1852 insertions(+), 1076 deletions(-) create mode 100644 drivers/net/pch_gbe.c create mode 100644 drivers/net/pch_gbe.h Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch sandbox
On Sun, Feb 15, 2015 at 02:46:05PM -0700, Simon Glass wrote: Hi Tom, There are the only pending sandbox/patman/buildman patches that I am aware of (for this release). If I have missed any, please assign them to me in patchwork. Note these are in branch 'sandbox'. The following changes since commit bd2a4888b123713adec271d6c8040ca9f609aa2f: sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART (2015-02-11 19:43:45 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git x86/sandbox for you to fetch changes up to e50ab22984ce90ffcc47bc620ed2caac0bcc02f7: sandbox: Adjust the order of the NO_SDL check (2015-02-15 14:34:06 -0700) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch sandbox
Hi Tom, There are the only pending sandbox/patman/buildman patches that I am aware of (for this release). If I have missed any, please assign them to me in patchwork. Note these are in branch 'sandbox'. The following changes since commit bd2a4888b123713adec271d6c8040ca9f609aa2f: sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART (2015-02-11 19:43:45 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git x86/sandbox for you to fetch changes up to e50ab22984ce90ffcc47bc620ed2caac0bcc02f7: sandbox: Adjust the order of the NO_SDL check (2015-02-15 14:34:06 -0700) Albert ARIBAUD (1): buildman: allow multiple toolchains in a single path Joe Hershberger (1): sandbox: Return '-c command' exit value as sandbox exit code Simon Glass (3): buildman: Fix incorrect arguemnt in GetUpstream() patman: Read in the git-mailrc alias file sandbox: Adjust the order of the NO_SDL check arch/sandbox/config.mk | 12 ++-- arch/sandbox/cpu/start.c | 6 -- arch/sandbox/cpu/state.c | 5 - arch/sandbox/include/asm/state.h | 15 --- tools/buildman/toolchain.py | 9 + tools/patman/gitutil.py | 2 +- tools/patman/settings.py | 27 +++ 7 files changed, 43 insertions(+), 33 deletions(-) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch buildman
On Wed, Jan 14, 2015 at 10:20:06PM -0700, Simon Glass wrote: Hi Tom, Can we please try that again? I think I did something wrong. The branch name is 'buildman'. I am still getting errors about not pushing the code there, for non-master branches. The following changes since commit bd5053ffa5b8162257537bdb79ba829372423096: Merge branch 'buildman' of git://git.denx.de/u-boot-x86 (2015-01-14 11:00:38 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to d2ce658de527af4eaa193ccb7c4d881e02a31257: buildman: Add an option to write the full build output (2015-01-14 21:16:54 -0800) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch buildman
Hi Tom, Can we please try that again? I think I did something wrong. The branch name is 'buildman'. I am still getting errors about not pushing the code there, for non-master branches. The following changes since commit bd5053ffa5b8162257537bdb79ba829372423096: Merge branch 'buildman' of git://git.denx.de/u-boot-x86 (2015-01-14 11:00:38 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to d2ce658de527af4eaa193ccb7c4d881e02a31257: buildman: Add an option to write the full build output (2015-01-14 21:16:54 -0800) Simon Glass (17): buildman: Add tests that check the correct output directory is used buildman: Put build in 'current', not 'current/current' buildman: Don't prune output space for 'current source' build buildman: Try to guess the upstream commit buildman: Add an option to flatten output directory trees buildman: Don't remove entire output directory when testing buildman: Allow specifying a range of commits to build buildman: Try to avoid hard-coded string parsing buildman: Put the toolchain path first instead of last in PATH buildman: Add an option to use the full tool chain path buildman: Add a note about Python pre-requisites buildman: Add documentation about the .buildman file buildman: Don't complain about missing sections in ~/.buildman buildman: Don't use the local settings when running tests buildman: Allow architecture to alias to multiple toolchains buildman: Add the option to download toolchains from kernel.org buildman: Add an option to write the full build output tools/buildman/README | 142 +- tools/buildman/bsettings.py | 11 ++- tools/buildman/builder.py | 21 - tools/buildman/builderthread.py | 7 +- tools/buildman/cmdline.py | 10 +++ tools/buildman/control.py | 58 ++--- tools/buildman/test.py | 75 +++- tools/buildman/toolchain.py | 270 - tools/patman/gitutil.py | 90 --- 9 files changed, 606 insertions(+), 78 deletions(-) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch 'buildman'
On Tue, Jan 13, 2015 at 07:51:04PM -0800, Simon Glass wrote: Hi Tom, Here are all the buildman enhancements and bug fixes so far. I have a few more to work on but no patches yet. Note these are in branch 'buildman'. The following changes since commit 5f88ed5cde04612e5b4520327b82d81a3f5493a0: Merge git://git.denx.de/u-boot-x86 (2015-01-13 13:39:25 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to a9c3573c41864c0185f8f3adeb9cf124cb74e7ea: buildman: Add an option to write the full build output (2015-01-13 19:46:34 -0800) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch 'buildman'
Hi Tom, Here are all the buildman enhancements and bug fixes so far. I have a few more to work on but no patches yet. Note these are in branch 'buildman'. The following changes since commit 5f88ed5cde04612e5b4520327b82d81a3f5493a0: Merge git://git.denx.de/u-boot-x86 (2015-01-13 13:39:25 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to a9c3573c41864c0185f8f3adeb9cf124cb74e7ea: buildman: Add an option to write the full build output (2015-01-13 19:46:34 -0800) Simon Glass (17): buildman: Add tests that check the correct output directory is used buildman: Put build in 'current', not 'current/current' buildman: Don't prune output space for 'current source' build buildman: Try to guess the upstream commit buildman: Add an option to flatten output directory trees buildman: Don't remove entire output directory when testing buildman: Allow specifying a range of commits to build buildman: Try to avoid hard-coded string parsing buildman: Put the toolchain path first instead of last in PATH buildman: Add an option to use the full tool chain path buildman: Add a note about Python pre-requisites buildman: Add documentation about the .buildman file buildman: Don't complain about missing sections in ~/.buildman buildman: Don't use the local settings when running tests buildman: Allow architecture to alias to multiple toolchains buildman: Add the option to download toolchains from kernel.org buildman: Add an option to write the full build output tools/buildman/README | 142 +- tools/buildman/bsettings.py | 11 ++- tools/buildman/builder.py | 21 - tools/buildman/builderthread.py | 7 +- tools/buildman/cmdline.py | 10 +++ tools/buildman/control.py | 58 ++--- tools/buildman/test.py | 75 +++- tools/buildman/toolchain.py | 270 - tools/patman/gitutil.py | 90 --- 9 files changed, 606 insertions(+), 78 deletions(-) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git (take 2)
Hi Tom, I'm not sure of the process for a failed pull request. I have fixed up the offending patch (fdt: Add several apis to decode pci device node) and pushed to to x86/master. The following changes since commit 92fa7f53f1f3f03296f8ffb14bdf1baefab83368: Prepare v2015.01 (2015-01-12 09:39:08 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 657e384af630463e3c8c4ffbacd16c5e46aeb0e0: x86: Remove CONFIG_DISPLAY_CPUINFO in chromebook_link.h (2015-01-13 07:25:05 -0800) Bin Meng (25): x86: Remove alex.dts in arch/x86/dts x86: Rename coreboot.dsti to serial.dtsi x86: Clean up the board dts files x86: Add missing DECLARE_GLOBAL_DATA_PTR for pci.c x86: Support pci bus scan in the early phase pci: Make pci apis usable before relocation x86: Simplify the fsp hob access functions fdt: Add several apis to decode pci device node serial: ns16550: Support ns16550 compatible pci uart devices x86: Use ePAPR defined properties for x86-uart x86: crownbay: Add pci devices in the dts file x86: fsp: Drop get_hob_type() and get_hob_length() x86: coreboot: Set up timer base correctly x86: Allow a hardcoded TSC frequency provided by Kconfig x86: Move CONFIG_X86_RESET_VECTOR and CONFIG_SYS_X86_START16 to Kconfig x86: Hide ROM chip size when CONFIG_X86_RESET_VECTOR is not selected x86: coreboot: Make SYS_CONFIG_NAME and DEFAULT_DEVICE_TREE configurable x86: coreboot: Move coreboot-specific defines from coreboot.h to Kconfig x86: Move CONFIG_SYS_CAR_xxx to Kconfig x86: Remove include/configs/coreboot.h x86: Make chromebook_link the default board for coreboot x86: coreboot: Wrap cros_ec initialization x86: coreboot: Configure pci memory regions x86: Update README.x86 for coreboot support x86: Remove CONFIG_DISPLAY_CPUINFO in chromebook_link.h Simon Glass (20): x86: Correct XIP_ROM_SIZE x86: Drop RAMTOP Kconfig x86: Correct ifdtool microcode calculation x86: video: Add a debug() to display the frame buffer address x86: pci: Don't return a vesa mode when there is not video x86: video: Add debug option to time the BIOS copy x86: ivybridge: Only run the Video BIOS when video is enabled x86: Use cache, don't clear the display in video BIOS x86: Tidy up VESA mode numbers x86: pci: Display vesa modes in hex x86: ivybridge: Drop support for ROM caching x86: Add support for MTRRs x86: ivybridge: Set up an MTRR for the video frame buffer x86: board_f: Adjust x86 boot order for performance x86: ivybridge: Request MTRRs for DRAM regions x86: Commit the current MTRRs before relocation x86: ivybridge: Add a way to turn off the CAR x86: Disable CAR before relocation on platforms that need it x86: ivybridge: Update microcode early in boot x86: Add an 'mtrr' command to list and adjust MTRRs arch/x86/Kconfig | 39 +- arch/x86/cpu/Makefile | 1 + arch/x86/cpu/coreboot/Kconfig | 15 +++ arch/x86/cpu/coreboot/coreboot.c | 22 ++-- arch/x86/cpu/coreboot/pci.c | 30 - arch/x86/cpu/coreboot/timestamp.c | 33 -- arch/x86/cpu/ivybridge/car.S | 74 +++- arch/x86/cpu/ivybridge/cpu.c | 27 + arch/x86/cpu/ivybridge/gma.c | 16 ++- arch/x86/cpu/ivybridge/microcode_intel.c | 26 ++-- arch/x86/cpu/ivybridge/sdram.c| 10 ++ arch/x86/cpu/mtrr.c | 81 + arch/x86/cpu/pci.c| 11 +- arch/x86/cpu/queensbay/fsp_support.c | 95 --- arch/x86/cpu/queensbay/tnc_dram.c | 39 +++--- arch/x86/cpu/start.S | 8 ++ arch/x86/dts/Makefile | 4 +- arch/x86/dts/alex.dts | 24 arch/x86/dts/chromebook_link.dts | 217 - arch/x86/dts/coreboot.dtsi| 17 --- arch/x86/dts/crownbay.dts | 94 +-- arch/x86/dts/link.dts | 224 --- arch/x86/dts/serial.dtsi | 9 ++ arch/x86/include/asm/arch-ivybridge/microcode.h | 6 + arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h | 68 +++ arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h | 5 +- arch/x86/include/asm/global_data.h| 16 ++-
Re: [U-Boot] Please pull u-boot-x86.git
On Mon, Jan 12, 2015 at 05:06:19PM -0800, Simon Glass wrote: Hi Tom, The following changes since commit 92fa7f53f1f3f03296f8ffb14bdf1baefab83368: Prepare v2015.01 (2015-01-12 09:39:08 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to c479f96c0e0ceb226a8fb83a7996b78bfdcfd7b2: x86: Remove CONFIG_DISPLAY_CPUINFO in chromebook_link.h (2015-01-12 17:03:47 -0800) This breaks the heck out of most other platforms: +(davinci_sonata) In file included from arch/arm/lib/board.c:39:0: +(davinci_sonata) include/fdtdec.h:342:30: error: unknown type name 'pci_dev_t' Please fix, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
Hi Tom, On 13 January 2015 at 06:37, Tom Rini tr...@ti.com wrote: On Mon, Jan 12, 2015 at 05:06:19PM -0800, Simon Glass wrote: Hi Tom, The following changes since commit 92fa7f53f1f3f03296f8ffb14bdf1baefab83368: Prepare v2015.01 (2015-01-12 09:39:08 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to c479f96c0e0ceb226a8fb83a7996b78bfdcfd7b2: x86: Remove CONFIG_DISPLAY_CPUINFO in chromebook_link.h (2015-01-12 17:03:47 -0800) This breaks the heck out of most other platforms: +(davinci_sonata) In file included from arch/arm/lib/board.c:39:0: +(davinci_sonata) include/fdtdec.h:342:30: error: unknown type name 'pci_dev_t' Please fix, thanks! Oh dear, thanks for catching this. It looks like this patch: cf1a5cb fdt: Add several apis to decode pci device node I'll fix it (and my process). Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git (take 2)
On Tue, Jan 13, 2015 at 10:21:06AM -0800, Simon Glass wrote: Hi Tom, I'm not sure of the process for a failed pull request. I have fixed up the offending patch (fdt: Add several apis to decode pci device node) and pushed to to x86/master. The following changes since commit 92fa7f53f1f3f03296f8ffb14bdf1baefab83368: Prepare v2015.01 (2015-01-12 09:39:08 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 657e384af630463e3c8c4ffbacd16c5e46aeb0e0: x86: Remove CONFIG_DISPLAY_CPUINFO in chromebook_link.h (2015-01-13 07:25:05 -0800) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, The following changes since commit 92fa7f53f1f3f03296f8ffb14bdf1baefab83368: Prepare v2015.01 (2015-01-12 09:39:08 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to c479f96c0e0ceb226a8fb83a7996b78bfdcfd7b2: x86: Remove CONFIG_DISPLAY_CPUINFO in chromebook_link.h (2015-01-12 17:03:47 -0800) Bin Meng (25): x86: Remove alex.dts in arch/x86/dts x86: Rename coreboot.dsti to serial.dtsi x86: Clean up the board dts files x86: Add missing DECLARE_GLOBAL_DATA_PTR for pci.c x86: Support pci bus scan in the early phase pci: Make pci apis usable before relocation x86: Simplify the fsp hob access functions fdt: Add several apis to decode pci device node serial: ns16550: Support ns16550 compatible pci uart devices x86: Use ePAPR defined properties for x86-uart x86: crownbay: Add pci devices in the dts file x86: fsp: Drop get_hob_type() and get_hob_length() x86: coreboot: Set up timer base correctly x86: Allow a hardcoded TSC frequency provided by Kconfig x86: Move CONFIG_X86_RESET_VECTOR and CONFIG_SYS_X86_START16 to Kconfig x86: Hide ROM chip size when CONFIG_X86_RESET_VECTOR is not selected x86: coreboot: Make SYS_CONFIG_NAME and DEFAULT_DEVICE_TREE configurable x86: coreboot: Move coreboot-specific defines from coreboot.h to Kconfig x86: Move CONFIG_SYS_CAR_xxx to Kconfig x86: Remove include/configs/coreboot.h x86: Make chromebook_link the default board for coreboot x86: coreboot: Wrap cros_ec initialization x86: coreboot: Configure pci memory regions x86: Update README.x86 for coreboot support x86: Remove CONFIG_DISPLAY_CPUINFO in chromebook_link.h Simon Glass (20): x86: Correct XIP_ROM_SIZE x86: Drop RAMTOP Kconfig x86: Correct ifdtool microcode calculation x86: video: Add a debug() to display the frame buffer address x86: pci: Don't return a vesa mode when there is not video x86: video: Add debug option to time the BIOS copy x86: ivybridge: Only run the Video BIOS when video is enabled x86: Use cache, don't clear the display in video BIOS x86: Tidy up VESA mode numbers x86: pci: Display vesa modes in hex x86: ivybridge: Drop support for ROM caching x86: Add support for MTRRs x86: ivybridge: Set up an MTRR for the video frame buffer x86: board_f: Adjust x86 boot order for performance x86: ivybridge: Request MTRRs for DRAM regions x86: Commit the current MTRRs before relocation x86: ivybridge: Add a way to turn off the CAR x86: Disable CAR before relocation on platforms that need it x86: ivybridge: Update microcode early in boot x86: Add an 'mtrr' command to list and adjust MTRRs arch/x86/Kconfig | 39 +- arch/x86/cpu/Makefile | 1 + arch/x86/cpu/coreboot/Kconfig | 15 +++ arch/x86/cpu/coreboot/coreboot.c | 22 ++-- arch/x86/cpu/coreboot/pci.c | 30 - arch/x86/cpu/coreboot/timestamp.c | 33 -- arch/x86/cpu/ivybridge/car.S | 74 +++- arch/x86/cpu/ivybridge/cpu.c | 27 + arch/x86/cpu/ivybridge/gma.c | 16 ++- arch/x86/cpu/ivybridge/microcode_intel.c | 26 ++-- arch/x86/cpu/ivybridge/sdram.c| 10 ++ arch/x86/cpu/mtrr.c | 81 + arch/x86/cpu/pci.c| 11 +- arch/x86/cpu/queensbay/fsp_support.c | 95 --- arch/x86/cpu/queensbay/tnc_dram.c | 39 +++--- arch/x86/cpu/start.S | 8 ++ arch/x86/dts/Makefile | 4 +- arch/x86/dts/alex.dts | 24 arch/x86/dts/chromebook_link.dts | 217 - arch/x86/dts/coreboot.dtsi| 17 --- arch/x86/dts/crownbay.dts | 94 +-- arch/x86/dts/link.dts | 224 --- arch/x86/dts/serial.dtsi | 9 ++ arch/x86/include/asm/arch-ivybridge/microcode.h | 6 + arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h | 68 +++ arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h | 5 +- arch/x86/include/asm/global_data.h| 16 ++- arch/x86/include/asm/mtrr.h | 163 - arch/x86/include/asm/pci.h| 2 +- arch/x86/lib/Makefile
Re: [U-Boot] Please pull u-boot-x86.git branch misc
On Mon, Jan 05, 2015 at 05:48:01PM -0700, Simon Glass wrote: Hi Tom, This didn't go through last time, it is on branch 'misc'. The following changes since commit d622ac39274a949b6445f1bfd92dc1644014388b: powerpc: mpc824x: remove MPC824X cpu support (2015-01-05 12:08:55 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 9332274989009b213a405134202088e1bd81fe51: cros-ec-keyboard: Synchronize DT binding from linux (2015-01-05 17:45:16 -0700) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch misc
Hi Tom, This didn't go through last time, it is on branch 'misc'. The following changes since commit d622ac39274a949b6445f1bfd92dc1644014388b: powerpc: mpc824x: remove MPC824X cpu support (2015-01-05 12:08:55 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 9332274989009b213a405134202088e1bd81fe51: cros-ec-keyboard: Synchronize DT binding from linux (2015-01-05 17:45:16 -0700) Masahiro Yamada (2): dm: README: recommend u-boot.dtb to try driver-model on sandbox i2c_eeprom: include linux/err.h to fix build error Sjoerd Simons (1): cros-ec-keyboard: Synchronize DT binding from linux arch/arm/dts/exynos5250-snow.dts| 59 +++ arch/arm/dts/exynos5420-peach-pit.dts | 59 +++ arch/arm/dts/exynos5800-peach-pi.dts| 4 +++- doc/device-tree-bindings/input/cros-ec-keyb.txt | 53 +++-- doc/driver-model/README.txt | 4 ++-- drivers/input/cros_ec_keyb.c| 16 ++-- drivers/misc/i2c_eeprom.c | 1 + 7 files changed, 41 insertions(+), 155 deletions(-) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch misc
Hi Tom, On 29 December 2014 at 19:26, Tom Rini tr...@ti.com wrote: On Mon, Dec 29, 2014 at 03:07:41PM -0700, Simon Glass wrote: Hi Tom, Here are a few misc fixes and updates. Note that the branch is 'misc' (there is also a 'master' branch pull out there). The following changes since commit d8bec60c1b0de7770f9b56ad092ab9be801d99af: ARM: UniPhier: enable CONFIG_CMD_DM (2014-12-18 23:34:30 +0900) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 90f20e002e16c53f7857740a5e6baaa7183f584c: cros-ec-keyboard: Synchronize DT binding from linux (2014-12-29 15:02:02 -0700) Applied to u-boot/master, thanks! Sorry for the delay - I was just looking and could not see this pull request applied. I will rebase and send a new pull request. Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch misc
Hi Tom, Here are a few misc fixes and updates. Note that the branch is 'misc' (there is also a 'master' branch pull out there). The following changes since commit d8bec60c1b0de7770f9b56ad092ab9be801d99af: ARM: UniPhier: enable CONFIG_CMD_DM (2014-12-18 23:34:30 +0900) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 90f20e002e16c53f7857740a5e6baaa7183f584c: cros-ec-keyboard: Synchronize DT binding from linux (2014-12-29 15:02:02 -0700) Masahiro Yamada (2): dm: README: recommend u-boot.dtb to try driver-model on sandbox i2c_eeprom: include linux/err.h to fix build error Sjoerd Simons (1): cros-ec-keyboard: Synchronize DT binding from linux arch/arm/dts/exynos5250-snow.dts| 59 +++ arch/arm/dts/exynos5420-peach-pit.dts | 59 +++ arch/arm/dts/exynos5800-peach-pi.dts| 4 +++- doc/device-tree-bindings/input/cros-ec-keyb.txt | 53 +++-- doc/driver-model/README.txt | 4 ++-- drivers/input/cros_ec_keyb.c| 16 ++-- drivers/misc/i2c_eeprom.c | 1 + 7 files changed, 41 insertions(+), 155 deletions(-) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch misc
On Mon, Dec 29, 2014 at 03:07:41PM -0700, Simon Glass wrote: Hi Tom, Here are a few misc fixes and updates. Note that the branch is 'misc' (there is also a 'master' branch pull out there). The following changes since commit d8bec60c1b0de7770f9b56ad092ab9be801d99af: ARM: UniPhier: enable CONFIG_CMD_DM (2014-12-18 23:34:30 +0900) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 90f20e002e16c53f7857740a5e6baaa7183f584c: cros-ec-keyboard: Synchronize DT binding from linux (2014-12-29 15:02:02 -0700) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Thu, Dec 18, 2014 at 05:29:39PM -0700, Simon Glass wrote: Hi Tom, Here is the last of the Atom changes - we now have good support for one Atom variant (with a path to adding to it) and basic support for ivybridge. A good start. The following changes since commit d8bec60c1b0de7770f9b56ad092ab9be801d99af: ARM: UniPhier: enable CONFIG_CMD_DM (2014-12-18 23:34:30 +0900) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to d2c6181d2d2afe00399cf0c8d9deafcb66b77330: x86: Add a script to process Intel microcode files (2014-12-18 17:26:08 -0700) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, Here is the last of the Atom changes - we now have good support for one Atom variant (with a path to adding to it) and basic support for ivybridge. A good start. The following changes since commit d8bec60c1b0de7770f9b56ad092ab9be801d99af: ARM: UniPhier: enable CONFIG_CMD_DM (2014-12-18 23:34:30 +0900) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to d2c6181d2d2afe00399cf0c8d9deafcb66b77330: x86: Add a script to process Intel microcode files (2014-12-18 17:26:08 -0700) Bin Meng (14): x86: Integrate Tunnel Creek processor microcode x86: Add basic support to queensbay platform and crownbay board x86: ich6-gpio: Add Intel Tunnel Creek GPIO support x86: Enable the queensbay cpu directory build x86: Add queensbay and crownbay Kconfig files x86: Add crownbay defconfig and config.h x86: Use consistent name XXX_ADDR for binary blob flash address x86: Include FSP and CMC binary in the u-boot.rom build rules x86: crownbay: Add SPI flash support x86: crownbay: Enable Intel E1000 NIC support x86: crownbay: Add SDHCI support x86: Rename coreboot-serial to x86-serial x86: Add a README.x86 for U-Boot on x86 support x86: Clean up the FSP support codes Simon Glass (9): x86: ifdtool: Correct a debug() missing parameter x86: ifdtool: Display filename when file errors are reported x86: ifdtool: Use a structure for the file/address list x86: ifdtool: Add support for early microcode access x86: Move microcode updates into a separate directory x86: ivybridge: Update the microcode x86: Correct problems in the microcode loading x86: Convert microcode format to device-tree-only x86: Add a script to process Intel microcode files Makefile | 16 +- arch/x86/Kconfig | 13 ++ arch/x86/cpu/Makefile| 1 + arch/x86/cpu/ivybridge/microcode_intel.c | 27 ++- arch/x86/cpu/ivybridge/sdram.c | 2 +- arch/x86/cpu/queensbay/Kconfig | 79 +++ arch/x86/cpu/queensbay/Makefile | 9 + arch/x86/cpu/queensbay/fsp_configs.c | 2 +- arch/x86/cpu/queensbay/fsp_support.c | 255 ++-- arch/x86/cpu/queensbay/tnc.c | 72 ++ arch/x86/cpu/queensbay/tnc_car.S | 124 ++ arch/x86/cpu/queensbay/tnc_dram.c| 78 +++ arch/x86/cpu/queensbay/tnc_pci.c | 61 + arch/x86/cpu/queensbay/topcliff.c| 47 arch/x86/dts/coreboot.dtsi | 2 +- arch/x86/dts/crownbay.dts| 7 + arch/x86/dts/link.dts| 4 +- arch/x86/dts/m12206a7_0028.dtsi | 622 - arch/x86/dts/m12306a9_0017.dtsi | 750 --- arch/x86/dts/microcode/m0220661105_cv.dtsi | 368 + arch/x86/dts/microcode/m12206a7_0029.dtsi| 686 ++ arch/x86/dts/microcode/m12306a9_001b.dtsi| 814 arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h| 18 +- arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h| 28 +-- arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h | 14 +- arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h| 112 + arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h | 6 +- arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h | 8 +- arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h| 63 ++--- arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h | 17 +- arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h| 8 +- arch/x86/include/asm/arch-queensbay/gpio.h | 13 ++ arch/x86/include/asm/arch-queensbay/tnc.h| 15 ++ arch/x86/include/asm/gpio.h | 4 +- arch/x86/include/asm/ibmpc.h | 3 + arch/x86/lib/cmd_hob.c | 22 +- board/coreboot/coreboot/coreboot.c | 2 +- board/google/chromebook_link/link.c | 2 +- board/intel/crownbay/Kconfig | 20 ++ board/intel/crownbay/MAINTAINERS | 6 + board/intel/crownbay/Makefile| 7 + board/intel/crownbay/crownbay.c
Re: [U-Boot] Please pull u-boot-x86.git branch 'sandbox'
On Mon, Dec 01, 2014 at 03:31:17PM -0700, Simon Glass wrote: Hi Tom, A random collection of thnigs. Note the branch is 'sandbox'. The following changes since commit 85bafb6da4dddfffa78479aa49a72ae48578a4ce: Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq (2014-11-26 11:23:26 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 1d8104fe8897c5fec3e03b4165bc67c57eeeaa72: buildman: Don't default to -e when building current source (2014-11-26 20:25:40 -0700) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Wed, Nov 26, 2014 at 09:28:50AM -0700, Simon Glass wrote: Hi Tom, This is the last of the bare x86 support for this release. I also brought in some interrupt fixes from Bin. The following changes since commit 2a82ec77d27ef5f860a107c4b764643a655dceeb: Prepare v2015.01-rc2 (2014-11-24 17:08:47 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 908ec6e4d1d12f746cb9b7cc73430a268ceb2c92: tools: Add ifdtool to .gitignore (2014-11-25 07:11:17 -0700) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch 'sandbox'
Hi Tom, A random collection of thnigs. Note the branch is 'sandbox'. The following changes since commit 85bafb6da4dddfffa78479aa49a72ae48578a4ce: Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq (2014-11-26 11:23:26 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 1d8104fe8897c5fec3e03b4165bc67c57eeeaa72: buildman: Don't default to -e when building current source (2014-11-26 20:25:40 -0700) Simon Glass (5): sandbox: Fix warnings due to 64-bit printf() strings sandbox: Fix warnings in cpu.c and os.c patman: Use the full commit hash for 'git checkout' buildman: Fix repeating board list with -l buildman: Don't default to -e when building current source Tom Rini (1): buildman: Save *.img files too arch/sandbox/cpu/os.c | 1 + arch/sandbox/cpu/start.c| 3 ++- common/cmd_mem.c| 6 -- common/fdt_support.c| 15 +++ disk/part_efi.c | 21 +++-- tools/buildman/README | 25 - tools/buildman/builder.py | 3 ++- tools/buildman/builderthread.py | 2 +- tools/buildman/control.py | 3 +-- tools/patman/patchstream.py | 3 +-- 10 files changed, 42 insertions(+), 40 deletions(-) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, This is the last of the bare x86 support for this release. I also brought in some interrupt fixes from Bin. The following changes since commit 2a82ec77d27ef5f860a107c4b764643a655dceeb: Prepare v2015.01-rc2 (2014-11-24 17:08:47 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 908ec6e4d1d12f746cb9b7cc73430a268ceb2c92: tools: Add ifdtool to .gitignore (2014-11-25 07:11:17 -0700) Bin Meng (5): x86: Call cpu_init_interrupts() from interrupt_init() x86: Remove cpu_init_r() for x86 x86: Refactor interrupt_init() x86: Remove unnecessary call to initr_enable_interrupts() tools: Add ifdtool to .gitignore Simon Glass (51): x86: Add ivybridge directory to Makefile Fix SIZE_MAX compiler warning when using stdint.h Align embedded device tree correctly pci: Update pci_ids.h to include some missing IDs x86: Remove board_early_init_r() x86: Panic if there is no relocation data x86: Ensure that all relocation data is included in the image x86: Factor out common values in the link script rtc: mc146818: Set up RTC at start of day x86: Add ioapic.h header x86: pci: Add handlers before and after a PCI hose scan x86: config: Enable plug-and-play for link PCI pci: Add functions to read and write a BAR address x86: Set up edge triggering on interrupt 9 x86: ivybridge: Add support for BD82x6x PCH x86: Add a simple header file for ACPI x86: ivybridge: Add PCH init x86: ivybridge: Add additional LPC init x86: dts: Move PCI peripherals into a pci node x86: dts: Add LPC settings for link x86: ivybridge: Add SATA init x86: dts: Add SATA settings for link x86: ivybridge: Set up EHCI USB x86: config: Enable USB on link x86: ivybridge: Set up XHCI USB x86: Add Intel speedstep and turbo mode code x86: Drop old CONFIG_INTEL_CORE_ARCH code x86: Add LAPIC setup code x86: Add init for model 206AX CPU x86: Drop some msr functions that we don't support x86: ivybridge: Add northbridge init functions x86: config: Enable SPI for chromebook_link x86: Add a definition of asmlinkage Introduce a header file for the BIOS emulator x86: Add GDT descriptors for option ROMs x86: Add vesa mode configuration options Add support for Vesa BIOS extensions x86: Add support for running option ROMs natively pci: Add general support for execution of video ROMs x86: video: Add video driver for bare x86 boards x86: Allow an option ROM to be built into U-Boot x86: Add initial video device init for Intel GMA x86: dts: Add video information to the device tree x86: config: Enable video support for chromebook_link bios_emulator: Allow x86 to use the emulator bios_emulator: Add vesa support and allow ROMs to be passed in as data bios_emulator: Allow a custom interrupt handler to be installed bios_emulator: Add an option to enable debugging bios_emulator: Always print errors when opcode decode fails x86: chromebook_link: Enable the x86 emulator x86: chromebook_link: Enable the Chrome OS EC Makefile | 3 + arch/x86/Kconfig | 149 +++ arch/x86/cpu/Makefile | 4 + arch/x86/cpu/config.mk| 5 +- arch/x86/cpu/coreboot/coreboot.c | 11 -- arch/x86/cpu/cpu.c| 17 +- arch/x86/cpu/interrupts.c | 54 ++ arch/x86/cpu/ivybridge/Makefile | 8 + arch/x86/cpu/ivybridge/bd82x6x.c | 146 +++ arch/x86/cpu/ivybridge/gma.c | 756 ++ arch/x86/cpu/ivybridge/gma.h | 156 arch/x86/cpu/ivybridge/lpc.c | 523 ++- arch/x86/cpu/ivybridge/model_206ax.c | 514 ++ arch/x86/cpu/ivybridge/northbridge.c | 188 +++ arch/x86/cpu/ivybridge/pch.c | 123 arch/x86/cpu/ivybridge/pci.c | 40 arch/x86/cpu/ivybridge/sata.c | 225 ++ arch/x86/cpu/ivybridge/usb_ehci.c | 29 +++ arch/x86/cpu/ivybridge/usb_xhci.c | 32 arch/x86/cpu/lapic.c | 57 ++ arch/x86/cpu/pci.c| 12 ++ arch/x86/cpu/turbo.c | 98 ++ arch/x86/cpu/u-boot.lds
Re: [U-Boot] Please pull u-boot-x86.git
On Fri, Nov 21, 2014 at 08:00:27AM +0100, Simon Glass wrote: Hi Tom, Here's the introduction of bare x86 support. The following changes since commit 4d70b34d7f721d8b1d4d628e68c3a44ab7a10dff: Merge branch 'master' of git://git.denx.de/u-boot-ubi (2014-11-19 23:18:29 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to fe5b9b447c6eea3873833b1f3ba15c9854aa2ef8: x86: Rename chromebook-x86 to coreboot (2014-11-21 07:34:16 +0100) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
Hi Simon, Tom, On Fri, 21 Nov 2014 08:24:54 +0100 Simon Glass s...@chromium.org wrote: Hi Masahiro, On 21 November 2014 08:11, Masahiro Yamada yamad...@jp.panasonic.com wrote: Simon, On Fri, 21 Nov 2014 08:00:27 +0100 Simon Glass s...@chromium.org wrote: Hi Tom, Here's the introduction of bare x86 support. The following changes since commit 4d70b34d7f721d8b1d4d628e68c3a44ab7a10dff: Merge branch 'master' of git://git.denx.de/u-boot-ubi (2014-11-19 23:18:29 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to fe5b9b447c6eea3873833b1f3ba15c9854aa2ef8: x86: Rename chromebook-x86 to coreboot (2014-11-21 07:34:16 +0100) Bin Meng (4): x86: Do CPU identification in the early phase x86: Do TSC MSR calibration only for known/supported CPUs x86: Add quick TSC calibration via PIT x86: Save TSC frequency in the global data Masahiro Yamada (1): x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory Wait, this patch was posted as a series. It should not be applied without the others in my series. What is going on? I applied this to x86 a while back - it actually was the same as a patch I had locally so I picked up yours instead. It works fine on x86 and I think it is independent of the series. So I know this is a bit unusual but I think it is OK. Understood, but I am a bit unhappy because - The subject x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory is totally unrelated to the actual code - The first hunk was lost of my original patch, so I have to resend my series to get it back. Tom, if possible, after you pull this, can you rephrase the commit subject locally? For ex. x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory - x86: remove redundant CONFIG_SYS_COREBOOT references I will resend my series lator... Best Regards Masahiro Yamada ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
Hi Masahiro, On 21 November 2014 09:29, Masahiro Yamada yamad...@jp.panasonic.com wrote: Hi Simon, Tom, On Fri, 21 Nov 2014 08:24:54 +0100 Simon Glass s...@chromium.org wrote: Hi Masahiro, On 21 November 2014 08:11, Masahiro Yamada yamad...@jp.panasonic.com wrote: Simon, On Fri, 21 Nov 2014 08:00:27 +0100 Simon Glass s...@chromium.org wrote: Hi Tom, Here's the introduction of bare x86 support. The following changes since commit 4d70b34d7f721d8b1d4d628e68c3a44ab7a10dff: Merge branch 'master' of git://git.denx.de/u-boot-ubi (2014-11-19 23:18:29 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to fe5b9b447c6eea3873833b1f3ba15c9854aa2ef8: x86: Rename chromebook-x86 to coreboot (2014-11-21 07:34:16 +0100) Bin Meng (4): x86: Do CPU identification in the early phase x86: Do TSC MSR calibration only for known/supported CPUs x86: Add quick TSC calibration via PIT x86: Save TSC frequency in the global data Masahiro Yamada (1): x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory Wait, this patch was posted as a series. It should not be applied without the others in my series. What is going on? I applied this to x86 a while back - it actually was the same as a patch I had locally so I picked up yours instead. It works fine on x86 and I think it is independent of the series. So I know this is a bit unusual but I think it is OK. Understood, but I am a bit unhappy because - The subject x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory is totally unrelated to the actual code - The first hunk was lost of my original patch, so I have to resend my series to get it back. Tom, if possible, after you pull this, can you rephrase the commit subject locally? For ex. x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory - x86: remove redundant CONFIG_SYS_COREBOOT references I will resend my series lator... Ah sorry, I'm not sure what went wrong but it looks like I dropped a piece. Tom, if you haven't already applied it, I'll drop this patch and resend the pull request next week. Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, Here's the introduction of bare x86 support. The following changes since commit 4d70b34d7f721d8b1d4d628e68c3a44ab7a10dff: Merge branch 'master' of git://git.denx.de/u-boot-ubi (2014-11-19 23:18:29 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to fe5b9b447c6eea3873833b1f3ba15c9854aa2ef8: x86: Rename chromebook-x86 to coreboot (2014-11-21 07:34:16 +0100) Bin Meng (4): x86: Do CPU identification in the early phase x86: Do TSC MSR calibration only for known/supported CPUs x86: Add quick TSC calibration via PIT x86: Save TSC frequency in the global data Masahiro Yamada (1): x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory Simon Glass (43): x86: Remove REALMODE_BASE which is no longer used x86: Remove board_init16() call which is not used x86: Invalidate TLB as early as possible x86: Tidy up global descriptor table setup x86: Use the standard dram_init() function x86: Use the standard arch_cpu_init() function x86: Fix up some missing prototypes x86: Save the BIST value on reset x86: Fix a warning with gcc 4.4.4 Move early malloc() to before arch_cpu_init() fdt: Add a function to decode a variable-sized u32 array dm: serial: Move current serial port pointer to global_data dm: gpio: Add a function to read an ID from a list of GPIOs x86: Add ifdtool for working with Intel Flash Descriptor ROM images x86: config: Move common x86 configs to a common file x86: Add processor functions to halt and get stack pointer x86: Remove unnecessary find_fdt(), prepare_fdt() functions x86: Replace fill_processor_name() with cpu_get_name() x86: Allow timer calibration to work on ivybridge x86: ifdtool: Allow creation of an empty ROM x86: Add chromebook_link board x86: Build a .rom file which can be flashed to an x86 machine x86: Emit post codes in startup code for Chromebooks x86: chromebook_link: Implement CAR support (cache as RAM) x86: Refactor PCI to permit alternate init x86: Support use of PCI before relocation x86: ivybridge: Enable PCI in early init x86: pci: Allow configuration before relocation x86: ivybridge: Add early LPC init so that serial works x86: Tidy up coreboot header usage x86: Add clr/setbits functions x86: Add msr read/write functions that use a structure x86: ivybridge: Perform initial CPU setup x86: ivybridge: Check BIST value on boot x86: ivybridge: Perform Intel microcode update on boot x86: dts: Add microcode updates for ivybridge CPU x86: ivybridge: Add early init for PCH devices x86: ivybridge: Add support for early GPIO init x86: chromebook_link: Enable GPIO support x86: Make show_boot_progress() common x86: ivybridge: Add LAPIC support x86: ivybridge: Implement SDRAM init x86: Rename chromebook-x86 to coreboot Makefile | 36 ++- arch/x86/Kconfig | 74 - arch/x86/config.mk |1 - arch/x86/cpu/Makefile|1 + arch/x86/cpu/coreboot/Makefile | 12 +- arch/x86/cpu/coreboot/coreboot.c | 42 +-- arch/x86/cpu/coreboot/ipchecksum.c |2 +- arch/x86/cpu/coreboot/pci.c | 22 +- arch/x86/cpu/coreboot/sdram.c| 15 +- arch/x86/cpu/coreboot/tables.c |6 +- arch/x86/cpu/cpu.c | 301 +++--- arch/x86/cpu/interrupts.c|2 +- arch/x86/cpu/ivybridge/Kconfig | 172 +++ arch/x86/cpu/ivybridge/Makefile | 16 + arch/x86/cpu/ivybridge/car.S | 178 +++ arch/x86/cpu/ivybridge/cpu.c | 357 ++ arch/x86/cpu/ivybridge/early_init.c | 145 + arch/x86/cpu/ivybridge/early_me.c| 191 arch/x86/cpu/ivybridge/lpc.c | 48 +++ arch/x86/cpu/ivybridge/me_status.c | 195 arch/x86/cpu/ivybridge/microcode_intel.c | 151 ++ arch/x86/cpu/ivybridge/pci.c | 60 arch/x86/cpu/ivybridge/report_platform.c | 89 ++ arch/x86/cpu/ivybridge/sdram.c | 571 +++
Re: [U-Boot] Please pull u-boot-x86.git
Simon, On Fri, 21 Nov 2014 08:00:27 +0100 Simon Glass s...@chromium.org wrote: Hi Tom, Here's the introduction of bare x86 support. The following changes since commit 4d70b34d7f721d8b1d4d628e68c3a44ab7a10dff: Merge branch 'master' of git://git.denx.de/u-boot-ubi (2014-11-19 23:18:29 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to fe5b9b447c6eea3873833b1f3ba15c9854aa2ef8: x86: Rename chromebook-x86 to coreboot (2014-11-21 07:34:16 +0100) Bin Meng (4): x86: Do CPU identification in the early phase x86: Do TSC MSR calibration only for known/supported CPUs x86: Add quick TSC calibration via PIT x86: Save TSC frequency in the global data Masahiro Yamada (1): x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory Wait, this patch was posted as a series. It should not be applied without the others in my series. What is going on? Best Regards Masahiro Yamada ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
Hi Masahiro, On 21 November 2014 08:11, Masahiro Yamada yamad...@jp.panasonic.com wrote: Simon, On Fri, 21 Nov 2014 08:00:27 +0100 Simon Glass s...@chromium.org wrote: Hi Tom, Here's the introduction of bare x86 support. The following changes since commit 4d70b34d7f721d8b1d4d628e68c3a44ab7a10dff: Merge branch 'master' of git://git.denx.de/u-boot-ubi (2014-11-19 23:18:29 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to fe5b9b447c6eea3873833b1f3ba15c9854aa2ef8: x86: Rename chromebook-x86 to coreboot (2014-11-21 07:34:16 +0100) Bin Meng (4): x86: Do CPU identification in the early phase x86: Do TSC MSR calibration only for known/supported CPUs x86: Add quick TSC calibration via PIT x86: Save TSC frequency in the global data Masahiro Yamada (1): x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory Wait, this patch was posted as a series. It should not be applied without the others in my series. What is going on? I applied this to x86 a while back - it actually was the same as a patch I had locally so I picked up yours instead. It works fine on x86 and I think it is independent of the series. So I know this is a bit unusual but I think it is OK. Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Wed, Oct 22, 2014 at 09:55:47PM -0600, Simon Glass wrote: Hi Tom, These are the last of the x86 patches before it is converted to driver model. The following changes since commit 35d4fed320d577a4446531d7b9350ce40065c4b0: x86: Fix GDT limit in start16.S (2014-10-22 09:03:07 -0600) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 8104f546296a8e1fc1dd6129041e22f508b314f9: net: Display the size when tftpboot finishes (2014-10-22 21:50:33 -0600) Simon Glass (10): x86: config: Enable dhcp on link x86: Add device tree information for Chrome OS EC x86: dts: Add device tree compatible string for Intel IPC x86: cros_ec: Update LPC driver for new cros_ec header x86: cros_ec: Enable cros_ec for link doc: Remove note about auto-complete not working with hush x86: link: Tidy up the command lines options x86: config: link: Display the board model on the screen x86: Enable FIT, ELF on coreboot net: Display the size when tftpboot finishes README | 4 arch/x86/dts/link.dts| 18 ++ board/chromebook-x86/coreboot/Makefile | 2 +- board/chromebook-x86/coreboot/coreboot.c | 16 drivers/misc/cros_ec_lpc.c | 4 ++-- include/configs/coreboot.h | 22 ++ include/fdtdec.h | 1 + lib/fdtdec.c | 1 + net/tftp.c | 2 ++ 9 files changed, 59 insertions(+), 11 deletions(-) create mode 100644 board/chromebook-x86/coreboot/coreboot.c Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, These are the last of the x86 patches before it is converted to driver model. The following changes since commit 35d4fed320d577a4446531d7b9350ce40065c4b0: x86: Fix GDT limit in start16.S (2014-10-22 09:03:07 -0600) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 8104f546296a8e1fc1dd6129041e22f508b314f9: net: Display the size when tftpboot finishes (2014-10-22 21:50:33 -0600) Simon Glass (10): x86: config: Enable dhcp on link x86: Add device tree information for Chrome OS EC x86: dts: Add device tree compatible string for Intel IPC x86: cros_ec: Update LPC driver for new cros_ec header x86: cros_ec: Enable cros_ec for link doc: Remove note about auto-complete not working with hush x86: link: Tidy up the command lines options x86: config: link: Display the board model on the screen x86: Enable FIT, ELF on coreboot net: Display the size when tftpboot finishes README | 4 arch/x86/dts/link.dts| 18 ++ board/chromebook-x86/coreboot/Makefile | 2 +- board/chromebook-x86/coreboot/coreboot.c | 16 drivers/misc/cros_ec_lpc.c | 4 ++-- include/configs/coreboot.h | 22 ++ include/fdtdec.h | 1 + lib/fdtdec.c | 1 + net/tftp.c | 2 ++ 9 files changed, 59 insertions(+), 11 deletions(-) create mode 100644 board/chromebook-x86/coreboot/coreboot.c Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch misc
On Tue, Sep 23, 2014 at 12:10:41PM +0900, Masahiro YAMADA wrote: 2014-09-23 2:26 GMT+09:00 Simon Glass s...@chromium.org: Hi Masahiro, On 22 September 2014 11:13, Masahiro YAMADA yamad...@jp.panasonic.com wrote: 2014-09-23 0:33 GMT+09:00 Simon Glass s...@chromium.org: Jagannadha Sutradharudu Teki (1): sandbox: Update minor documentation changes As I commented in http://patchwork.ozlabs.org/patch/384547/ the second hunk does not make sense at all and not fixed yet. I did read your comment but thought it was addressed. Are you wanting to change this line also? The chosen vendor and board names are also 'sandbox', so there is a single Let me know what you'd like it to say, and I'll prepare a patch. Prior to commit 2dabac1337facbd (sandbox: set sandbox's vendor to null), the following statement was correct: The chosen vendor and board names are also 'sandbox', so there is a single board in board/sandbox/sandbox. Since commit 2dabac1337facbd: The board name is 'sandbox' but the vendor name is unset, so there is a single board in board/sandbox. (Note, the board directory is specified by board/${VENDOR}/${BOARD}, or board/${BOARD} if VENDOR is null. ) Since we're talking docs and you guys are sorting it out now, I'll grab the current PR and then deal with another minor update after. -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch misc
On Mon, Sep 22, 2014 at 09:33:37AM -0600, Simon Glass wrote: Hi Tom, Here are some minor fixes for sandbox, buildman and patman. The following changes since commit 9170818a4e004af7893fa0113f6e5b4afafded55: kconfiglib: change SPDX-License-Identifier to ISC (2014-09-17 21:03:18 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git misc for you to fetch changes up to 983a2749e2fdc459b2f44e82241a5c314ddbcdf6: patman: Add a -m option to avoid copying the maintainers (2014-09-21 12:03:07 -0600) Jagannadha Sutradharudu Teki (1): sandbox: Update minor documentation changes Simon Glass (2): buildman: Fix the logic for the bloat command patman: Add a -m option to avoid copying the maintainers README | 2 +- board/sandbox/README.sandbox | 6 +++--- tools/buildman/control.py| 6 +++--- tools/patman/README | 4 ++-- tools/patman/patman.py | 6 +- tools/patman/series.py | 7 +-- 6 files changed, 19 insertions(+), 12 deletions(-) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch misc
2014-09-23 0:33 GMT+09:00 Simon Glass s...@chromium.org: Jagannadha Sutradharudu Teki (1): sandbox: Update minor documentation changes As I commented in http://patchwork.ozlabs.org/patch/384547/ the second hunk does not make sense at all and not fixed yet. -- Best Regards Masahiro Yamada ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch misc
Hi Masahiro, On 22 September 2014 11:13, Masahiro YAMADA yamad...@jp.panasonic.com wrote: 2014-09-23 0:33 GMT+09:00 Simon Glass s...@chromium.org: Jagannadha Sutradharudu Teki (1): sandbox: Update minor documentation changes As I commented in http://patchwork.ozlabs.org/patch/384547/ the second hunk does not make sense at all and not fixed yet. I did read your comment but thought it was addressed. Are you wanting to change this line also? The chosen vendor and board names are also 'sandbox', so there is a single Let me know what you'd like it to say, and I'll prepare a patch. Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch misc
2014-09-23 2:26 GMT+09:00 Simon Glass s...@chromium.org: Hi Masahiro, On 22 September 2014 11:13, Masahiro YAMADA yamad...@jp.panasonic.com wrote: 2014-09-23 0:33 GMT+09:00 Simon Glass s...@chromium.org: Jagannadha Sutradharudu Teki (1): sandbox: Update minor documentation changes As I commented in http://patchwork.ozlabs.org/patch/384547/ the second hunk does not make sense at all and not fixed yet. I did read your comment but thought it was addressed. Are you wanting to change this line also? The chosen vendor and board names are also 'sandbox', so there is a single Let me know what you'd like it to say, and I'll prepare a patch. Prior to commit 2dabac1337facbd (sandbox: set sandbox's vendor to null), the following statement was correct: The chosen vendor and board names are also 'sandbox', so there is a single board in board/sandbox/sandbox. Since commit 2dabac1337facbd: The board name is 'sandbox' but the vendor name is unset, so there is a single board in board/sandbox. (Note, the board directory is specified by board/${VENDOR}/${BOARD}, or board/${BOARD} if VENDOR is null. ) -- Best Regards Masahiro Yamada ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch misc
Hi Tom, Here are some minor fixes for sandbox, buildman and patman. The following changes since commit 9170818a4e004af7893fa0113f6e5b4afafded55: kconfiglib: change SPDX-License-Identifier to ISC (2014-09-17 21:03:18 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git misc for you to fetch changes up to 983a2749e2fdc459b2f44e82241a5c314ddbcdf6: patman: Add a -m option to avoid copying the maintainers (2014-09-21 12:03:07 -0600) Jagannadha Sutradharudu Teki (1): sandbox: Update minor documentation changes Simon Glass (2): buildman: Fix the logic for the bloat command patman: Add a -m option to avoid copying the maintainers README | 2 +- board/sandbox/README.sandbox | 6 +++--- tools/buildman/control.py| 6 +++--- tools/patman/README | 4 ++-- tools/patman/patman.py | 6 +- tools/patman/series.py | 7 +-- 6 files changed, 19 insertions(+), 12 deletions(-) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch 'buildman'
On Tue, Sep 09, 2014 at 04:52:18PM -0600, Simon Glass wrote: Hi Tom, Here are all the pending changes for patman/buildman. Mostly these add tests but there are also several fixes, some found by the tests. I believe it is worth applying these now, to make it easier to find other issues that might come up. Branch is 'buildman'. The following changes since commit 0b703dbcee7103f07804d0a4328d1593355c4324: patman: Fix detection of git version (2014-09-05 13:40:43 -0600) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to d0ea61d9caf85e4285d5c2da508db9fac70e4aba: buildman: fix typos of --dry-run help message (2014-09-09 16:48:06 -0600) Masahiro Yamada (1): buildman: fix typos of --dry-run help message Simon Glass (18): patman: Add a way of recording terminal output for testing buildman: Send builder output through a function for testing buildman: Enhance basic test to check summary output patman: RunPipe() should not pipe stdout/stderr unless asked buildman: Move the command line code into its own file buildman: Move full help code into the control module patman: Provide a way to intercept commands for testing buildman: Add a functional test buildman: Set up bsettings outside the control module buildman: Avoid looking at config file or toolchains in tests buildman: Allow tests to have their own boards buildman: Correct counting of build failures on retry buildman: Provide an internal option to clean the outpur dir patman: Start with a clean series when needed buildman: Add additional functional tests buildman: Expand output test to cover directory prefixes buildman: Permit branch names with an embedded '/' buildman: Ignore conflicting tags Thierry Reding (1): buildman: Create parent directories as necessary Vadim Bendebury (1): patman: make run results better visible tools/buildman/bsettings.py | 15 ++- tools/buildman/builder.py | 60 +- tools/buildman/builderthread.py | 22 ++-- tools/buildman/buildman.py | 98 ++-- tools/buildman/cmdline.py | 85 ++ tools/buildman/control.py | 73 tools/buildman/func_test.py | 519 +++ tools/buildman/test.py | 153 +++-- tools/buildman/toolchain.py | 4 +- tools/patman/command.py | 22 tools/patman/gitutil.py | 8 +- tools/patman/patchstream.py | 6 +- tools/patman/patman.py | 7 +- tools/patman/terminal.py| 72 14 files changed, 972 insertions(+), 172 deletions(-) create mode 100644 tools/buildman/cmdline.py create mode 100644 tools/buildman/func_test.py Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch 'buildman'
Hi Tom, Here are all the pending changes for patman/buildman. Mostly these add tests but there are also several fixes, some found by the tests. I believe it is worth applying these now, to make it easier to find other issues that might come up. Branch is 'buildman'. The following changes since commit 0b703dbcee7103f07804d0a4328d1593355c4324: patman: Fix detection of git version (2014-09-05 13:40:43 -0600) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to d0ea61d9caf85e4285d5c2da508db9fac70e4aba: buildman: fix typos of --dry-run help message (2014-09-09 16:48:06 -0600) Masahiro Yamada (1): buildman: fix typos of --dry-run help message Simon Glass (18): patman: Add a way of recording terminal output for testing buildman: Send builder output through a function for testing buildman: Enhance basic test to check summary output patman: RunPipe() should not pipe stdout/stderr unless asked buildman: Move the command line code into its own file buildman: Move full help code into the control module patman: Provide a way to intercept commands for testing buildman: Add a functional test buildman: Set up bsettings outside the control module buildman: Avoid looking at config file or toolchains in tests buildman: Allow tests to have their own boards buildman: Correct counting of build failures on retry buildman: Provide an internal option to clean the outpur dir patman: Start with a clean series when needed buildman: Add additional functional tests buildman: Expand output test to cover directory prefixes buildman: Permit branch names with an embedded '/' buildman: Ignore conflicting tags Thierry Reding (1): buildman: Create parent directories as necessary Vadim Bendebury (1): patman: make run results better visible tools/buildman/bsettings.py | 15 ++- tools/buildman/builder.py | 60 +- tools/buildman/builderthread.py | 22 ++-- tools/buildman/buildman.py | 98 ++-- tools/buildman/cmdline.py | 85 ++ tools/buildman/control.py | 73 tools/buildman/func_test.py | 519 +++ tools/buildman/test.py | 153 +++-- tools/buildman/toolchain.py | 4 +- tools/patman/command.py | 22 tools/patman/gitutil.py | 8 +- tools/patman/patchstream.py | 6 +- tools/patman/patman.py | 7 +- tools/patman/terminal.py| 72 14 files changed, 972 insertions(+), 172 deletions(-) create mode 100644 tools/buildman/cmdline.py create mode 100644 tools/buildman/func_test.py Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch 'patman'
On Fri, Sep 05, 2014 at 01:48:41PM -0600, Simon Glass wrote: Hi Tom, This is the rest of the initial patman/buildman series, except for the MAKEALL deprecation. I plan to also pull in the second buildman/patman series (with its fixes and new tests) for this release. There is a merge conflict with one of Masahiro's changes, so I will either resolve this manually, or resend the series. For now, here are change that I think are ready. The following changes since commit d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6: Prepare v2014.10-rc2 (2014-09-02 16:58:29 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to 0b703dbcee7103f07804d0a4328d1593355c4324: patman: Fix detection of git version (2014-09-05 13:40:43 -0600) Simon Glass (12): patman: Fix indentation in terminal.py patman: Correct unit tests to run correctly patman: Remove the -a option patman: Use --no-pager' to stop git from forking a pager patman: Avoid changing the order of tags buildman: Set the return code to indicate build result buildman: Allow make-flags variables to include '-' and '_' buildman: Implement an option to exclude boards from the build buildman: Remove the directory prefix from each error line buildman: Add an option to show which boards caused which errors buildman: Separate out display of warnings and errors patman: Fix detection of git version tools/buildman/README | 27 +--- tools/buildman/board.py | 31 ++- tools/buildman/builder.py | 139 --- tools/buildman/builderthread.py | 4 ++- tools/buildman/buildman.py | 8 - tools/buildman/control.py | 20 +--- tools/buildman/toolchain.py | 2 +- tools/patman/gitutil.py | 100 +-- tools/patman/patchstream.py | 21 - tools/patman/patman.py | 7 - tools/patman/terminal.py| 112 +++ tools/patman/test.py| 13 Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch 'patman'
Hi Tom, This is the rest of the initial patman/buildman series, except for the MAKEALL deprecation. I plan to also pull in the second buildman/patman series (with its fixes and new tests) for this release. There is a merge conflict with one of Masahiro's changes, so I will either resolve this manually, or resend the series. For now, here are change that I think are ready. The following changes since commit d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6: Prepare v2014.10-rc2 (2014-09-02 16:58:29 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to 0b703dbcee7103f07804d0a4328d1593355c4324: patman: Fix detection of git version (2014-09-05 13:40:43 -0600) Simon Glass (12): patman: Fix indentation in terminal.py patman: Correct unit tests to run correctly patman: Remove the -a option patman: Use --no-pager' to stop git from forking a pager patman: Avoid changing the order of tags buildman: Set the return code to indicate build result buildman: Allow make-flags variables to include '-' and '_' buildman: Implement an option to exclude boards from the build buildman: Remove the directory prefix from each error line buildman: Add an option to show which boards caused which errors buildman: Separate out display of warnings and errors patman: Fix detection of git version tools/buildman/README | 27 +--- tools/buildman/board.py | 31 ++- tools/buildman/builder.py | 139 --- tools/buildman/builderthread.py | 4 ++- tools/buildman/buildman.py | 8 - tools/buildman/control.py | 20 +--- tools/buildman/toolchain.py | 2 +- tools/patman/gitutil.py | 100 +-- tools/patman/patchstream.py | 21 - tools/patman/patman.py | 7 - tools/patman/terminal.py| 112 +++ tools/patman/test.py| 13 Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch patman
Hi Tom, This is just for one commit which fixes patman, so it should be applied before we get to the other stuff. (branch 'patman') The following changes since commit 7bee1c91a94db19bd26f92cc67be35d3592c6429: Merge branch 'ag...@denx.de' of git://git.denx.de/u-boot-staging (2014-08-25 08:34:39 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to 042a732cf50568e77a20c540341fccf28ba62bcf: patman: Support the 'reverse' option for 'git log' (2014-08-28 07:56:19 -0700) Simon Glass (1): patman: Support the 'reverse' option for 'git log' tools/patman/gitutil.py | 2 ++ 1 file changed, 2 insertions(+) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch patman
On Thu, Aug 28, 2014 at 09:00:32AM -0600, Simon Glass wrote: Hi Tom, This is just for one commit which fixes patman, so it should be applied before we get to the other stuff. (branch 'patman') The following changes since commit 7bee1c91a94db19bd26f92cc67be35d3592c6429: Merge branch 'ag...@denx.de' of git://git.denx.de/u-boot-staging (2014-08-25 08:34:39 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to 042a732cf50568e77a20c540341fccf28ba62bcf: patman: Support the 'reverse' option for 'git log' (2014-08-28 07:56:19 -0700) Simon Glass (1): patman: Support the 'reverse' option for 'git log' tools/patman/gitutil.py | 2 ++ 1 file changed, 2 insertions(+) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch buildman
The following changes since commit 5b7d0027c2463101dabf337a7cccd768fc20b85e: Merge branch 'master' of git://git.denx.de/u-boot-blackfin (2014-08-12 16:54:55 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to e49f14af1349eef94e41b636320bbfcace7403b5: patman: Only use git's --no-decorate when available (2014-08-13 08:34:16 -0600) Simon Glass (15): buildman: Fix a few typos buildman: Add some notes about moving from MAKEALL buildman: Allow building of current source tree buildman: Move BuilderThread code to its own file buildman: Sort command line options buildman: Refactor output options buildman: Add verbose option to display errors as they happen buildman: Remove unused non-incremental build method code buildman: Add an option to specify the buildman config file buildman: Add a message indicating there are no errors buildman: Add a few more toolchain examples to the README buildman: Introduce an 'and' operator for board selection buildman: Allow selection of the number of commits to build patman: Move the 'git log' command into a function patman: Only use git's --no-decorate when available tools/buildman/README | 159 +++-- tools/buildman/board.py | 144 --- tools/buildman/builder.py | 545 ++-- tools/buildman/builderthread.py | 434 + tools/buildman/buildman.py | 16 ++- tools/buildman/control.py | 108 ++- tools/buildman/test.py | 56 +++- tools/patman/gitutil.py | 40 +- tools/patman/patchstream.py | 11 +- 9 files changed, 947 insertions(+), 566 deletions(-) create mode 100644 tools/buildman/builderthread.py ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch buildman
On Wed, Aug 13, 2014 at 08:46:48AM -0600, Simon Glass wrote: The following changes since commit 5b7d0027c2463101dabf337a7cccd768fc20b85e: Merge branch 'master' of git://git.denx.de/u-boot-blackfin (2014-08-12 16:54:55 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to e49f14af1349eef94e41b636320bbfcace7403b5: OK, the x86 and dm repositories have gotten mixed up I think with what you've pushed: $ git fetch git://git.denx.de/u-boot-x86.git master $ git log --oneline origin/master..FETCH_HEAD a193cc9 dm: Expand and improve the device lifecycle docs 8c0ce6f dm: Tidy up four minor code nits eabbdc8 tegra: Enable driver model bfab7d3 tegra: dts: Bring in GPIO bindings from linux bb5d586 dm: Fix printf() strings in the 'dm' command 6a89571 dm: Allow driver model tests only for sandbox 7559956e dm: Cast away the const-ness of the global_data pointer b40c4e4 dm: Add missing header files in lists and root 8bcde49 dm: Use case-insensitive comparison for GPIO banks 8a028ab dm: Update README to encourage conversion to driver model e0db60d dm: Rename struct device_id to udevice_id 068dd6c Makefile: Support include files for .dts files ff0ef4a sandbox: Support iotrace feature 83aece4 arm: Support iotrace feature ddfccb1 Add an I/O tracing feature Is what I see. And it doesn't pull cleanly either :) -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch buildman
Hi Tom, On 13 August 2014 09:26, Tom Rini tr...@ti.com wrote: On Wed, Aug 13, 2014 at 08:46:48AM -0600, Simon Glass wrote: The following changes since commit 5b7d0027c2463101dabf337a7cccd768fc20b85e: Merge branch 'master' of git://git.denx.de/u-boot-blackfin (2014-08-12 16:54:55 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to e49f14af1349eef94e41b636320bbfcace7403b5: OK, the x86 and dm repositories have gotten mixed up I think with what you've pushed: $ git fetch git://git.denx.de/u-boot-x86.git master $ git log --oneline origin/master..FETCH_HEAD a193cc9 dm: Expand and improve the device lifecycle docs 8c0ce6f dm: Tidy up four minor code nits eabbdc8 tegra: Enable driver model bfab7d3 tegra: dts: Bring in GPIO bindings from linux bb5d586 dm: Fix printf() strings in the 'dm' command 6a89571 dm: Allow driver model tests only for sandbox 7559956e dm: Cast away the const-ness of the global_data pointer b40c4e4 dm: Add missing header files in lists and root 8bcde49 dm: Use case-insensitive comparison for GPIO banks 8a028ab dm: Update README to encourage conversion to driver model e0db60d dm: Rename struct device_id to udevice_id 068dd6c Makefile: Support include files for .dts files ff0ef4a sandbox: Support iotrace feature 83aece4 arm: Support iotrace feature ddfccb1 Add an I/O tracing feature Is what I see. And it doesn't pull cleanly either :) Those patches are already in mainline. Do you think that is because I didn't update 'master' in that repo? I've done it now - can you please retry the buildman branch? Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch buildman
On Wed, Aug 13, 2014 at 09:31:58AM -0600, Simon Glass wrote: Hi Tom, On 13 August 2014 09:26, Tom Rini tr...@ti.com wrote: On Wed, Aug 13, 2014 at 08:46:48AM -0600, Simon Glass wrote: The following changes since commit 5b7d0027c2463101dabf337a7cccd768fc20b85e: Merge branch 'master' of git://git.denx.de/u-boot-blackfin (2014-08-12 16:54:55 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to e49f14af1349eef94e41b636320bbfcace7403b5: OK, the x86 and dm repositories have gotten mixed up I think with what you've pushed: $ git fetch git://git.denx.de/u-boot-x86.git master $ git log --oneline origin/master..FETCH_HEAD a193cc9 dm: Expand and improve the device lifecycle docs 8c0ce6f dm: Tidy up four minor code nits eabbdc8 tegra: Enable driver model bfab7d3 tegra: dts: Bring in GPIO bindings from linux bb5d586 dm: Fix printf() strings in the 'dm' command 6a89571 dm: Allow driver model tests only for sandbox 7559956e dm: Cast away the const-ness of the global_data pointer b40c4e4 dm: Add missing header files in lists and root 8bcde49 dm: Use case-insensitive comparison for GPIO banks 8a028ab dm: Update README to encourage conversion to driver model e0db60d dm: Rename struct device_id to udevice_id 068dd6c Makefile: Support include files for .dts files ff0ef4a sandbox: Support iotrace feature 83aece4 arm: Support iotrace feature ddfccb1 Add an I/O tracing feature Is what I see. And it doesn't pull cleanly either :) Those patches are already in mainline. Do you think that is because I didn't update 'master' in that repo? I've done it now - can you please retry the buildman branch? Ah, the URI didn't say 'buildman' so I guessed wrong on where to look. Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch patman
On Mon, Jul 28, 2014 at 05:00:31AM +0100, Simon Glass wrote: Hi Tom, I think a few of these are ready to go in. The following changes since commit 772e173802627a1917a3f5878ad4b9b920089a33: Merge branch 'master' of git://git.denx.de/u-boot-sh (2014-07-25 15:05:09 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to ee860c60d2c5283c009f7ea740c6ee706da87cb7: patman: make No recipient checking more tolerant (2014-07-28 04:57:24 +0100) Masahiro Yamada (1): patman: make No recipient checking more tolerant Simon Glass (2): buildman: Add -C option to force a reconfigure for each commit buildman: Support in-tree builds tools/buildman/builder.py | 24 +--- tools/buildman/buildman.py | 6 ++ tools/buildman/control.py | 2 ++ tools/patman/gitutil.py| 11 --- Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch patman
Hi Tom, I think a few of these are ready to go in. The following changes since commit 772e173802627a1917a3f5878ad4b9b920089a33: Merge branch 'master' of git://git.denx.de/u-boot-sh (2014-07-25 15:05:09 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to ee860c60d2c5283c009f7ea740c6ee706da87cb7: patman: make No recipient checking more tolerant (2014-07-28 04:57:24 +0100) Masahiro Yamada (1): patman: make No recipient checking more tolerant Simon Glass (2): buildman: Add -C option to force a reconfigure for each commit buildman: Support in-tree builds tools/buildman/builder.py | 24 +--- tools/buildman/buildman.py | 6 ++ tools/buildman/control.py | 2 ++ tools/patman/gitutil.py| 11 --- 4 files changed, 37 insertions(+), 6 deletions(-) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch tom
Hi Tom, I've pick up a few bugfixes for this release in case there is time to pull these. The following changes since commit 6ee3d00d1d9d9977e975bd72c3668ee4f210a99d: Merge branch 'master' of git://git.denx.de/u-boot-i2c (2014-07-07 10:10:52 -0400) are available in the git repository at: x86-public/tom for you to fetch changes up to 8708267f09fa99be8c12e103f2cbdc14a43623cc: buildman: fix toolchain priority_list (2014-07-07 17:22:54 -0600) Masahiro Yamada (3): cosmetic: doc: update README.generic-board buildman: fix to display warning message for missing [toolchain] section buildman: fix toolchain priority_list Simon Glass (1): patman: Only apply patches when we know the original HEAD doc/README.generic-board| 3 ++- tools/buildman/toolchain.py | 4 ++-- tools/patman/gitutil.py | 4 3 files changed, 8 insertions(+), 3 deletions(-) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch tom
On Mon, Jul 07, 2014 at 05:26:15PM -0600, Simon Glass wrote: Hi Tom, I've pick up a few bugfixes for this release in case there is time to pull these. The following changes since commit 6ee3d00d1d9d9977e975bd72c3668ee4f210a99d: Merge branch 'master' of git://git.denx.de/u-boot-i2c (2014-07-07 10:10:52 -0400) are available in the git repository at: x86-public/tom for you to fetch changes up to 8708267f09fa99be8c12e103f2cbdc14a43623cc: buildman: fix toolchain priority_list (2014-07-07 17:22:54 -0600) Masahiro Yamada (3): cosmetic: doc: update README.generic-board buildman: fix to display warning message for missing [toolchain] section buildman: fix toolchain priority_list Simon Glass (1): patman: Only apply patches when we know the original HEAD doc/README.generic-board| 3 ++- tools/buildman/toolchain.py | 4 ++-- tools/patman/gitutil.py | 4 3 files changed, 8 insertions(+), 3 deletions(-) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch sandbox
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 06/23/2014 05:43 PM, Simon Glass wrote: Hi Tom, Here are some sandbox bug fixes and one for x86. The following changes since commit 038380597bc9b97378da2e18355cd7346d17b002: mpc8313: add CONFIG_SYS_GENERIC_BOARD to ids8313 board (2014-06-23 09:11:41 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to 1638d98052e0d03e46d504b21ec1b88ecfcd87aa: sandbox: change local_irq_save() to macro (2014-06-23 15:37:24 -0600) Masahiro Yamada (1): sandbox: change local_irq_save() to macro Stephen Warren (2): sandbox: restore ability to access host fs through standard commands sandbox: terminate os_dirent_ls() result list Vasili Galka (1): x86: Enable 32-bit build using x86_64 multilib toolchain arch/sandbox/cpu/os.c | 1 + arch/sandbox/include/asm/bitops.h | 5 +++-- arch/sandbox/include/asm/system.h | 5 + arch/x86/config.mk| 5 +++-- arch/x86/cpu/config.mk| 2 +- common/cmd_sandbox.c | 10 ++ disk/part.c | 19 +++ test/command_ut.c | 8 test/vboot/vboot_test.sh | 2 +- 9 files changed, 39 insertions(+), 18 deletions(-) Applied to u-boot/master, thanks! - -- Tom -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJTqb5NAAoJENk4IS6UOR1WLbsP/0QIf3+A7pyDvFua2aD1ZmwA /+3SL8vg1aV3/OS6OjzlMe5P5KHsCx0wrzz2RIdzPKig21fv3tDuzbGzfiJPw06P ptUK4J4QH4j+4fQpcaA5okFs//bv95I5jejRUbgkWKyMFTf+3urPLmugYIPFS0rI SC5BbvbJJ3D7TPGAQ1/gtXC04r5H1Q2MCTXIfRwWqt1d8/9+mBlhgzlI043PrpIZ nzJPUSLWkQ3fBtDNt5jL5hjcGuv/U4yFdvai1PcVIDLaRbcB4N42xYHBKOrKWcKs rsf2S6Q2Xa7ZbUWidu1mI+HJXekjNYrP1vETl0b5nxV346q8831amvTMB8cQWu0E FMgyg6XEsmD3zChcchxsbdHHu0cRoxiWUm0Z4YKrv7KIiytysu39q7nDgPoSuIE/ 4WEKeJeqjQQr0zhfvD3LCSnlH9kjCxBRnBUsazR6niQlcgVwfvxKUecqrTkK7VyT b7fo8/emjrP8395Pxcpg+9IUQMsaLOciF7nTnUAMZlcRcOQq8EaUOvk3A6+uNdHJ DobZdWXOw8idYXJN5noJnhuHlIozorIFH06Trqlhpg5DHpdtCX26JEagpsEbUgL2 BPsEvkwtUOjaK6UNhI23+06gF8nStBStJtNqrT7suSMO7AefoRu/8suFTi8Ysx+A sFmM39OpX4YNaFQ6+Ksr =0xh+ -END PGP SIGNATURE- ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch tom
Hi Tom, I collected these three fixes for pulling. Regards, Simon The following changes since commit 2072e7262965bb48d7fffb1e283101e6ed8b21a8: mvtwsi: Remove unnecessary twsi_baud_rate and twsi_slave_address globals (2014-05-14 12:59:12 +0200) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 6be6b6bcbac62e356d05bdde488fc9f0eef7084a: patman: Suppress duplicate signoffs only for real patches (2014-05-16 11:42:29 -0700) Masahiro Yamada (2): Revert sandbox: move source files from board/ to arch/sandbox/ sandbox: set sandbox's vendor to null Simon Glass (1): patman: Suppress duplicate signoffs only for real patches arch/sandbox/lib/Makefile | 2 +- board/sandbox/Makefile| 7 +++ {doc = board/sandbox}/README.sandbox | 0 {arch/sandbox/lib = board/sandbox}/sandbox.c | 0 boards.cfg| 2 +- tools/patman/patchstream.py | 3 ++- 6 files changed, 11 insertions(+), 3 deletions(-) create mode 100644 board/sandbox/Makefile rename {doc = board/sandbox}/README.sandbox (100%) rename {arch/sandbox/lib = board/sandbox}/sandbox.c (100%) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch tom
On Fri, May 16, 2014 at 01:02:48PM -0600, Simon Glass wrote: Hi Tom, I collected these three fixes for pulling. Regards, Simon The following changes since commit 2072e7262965bb48d7fffb1e283101e6ed8b21a8: mvtwsi: Remove unnecessary twsi_baud_rate and twsi_slave_address globals (2014-05-14 12:59:12 +0200) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 6be6b6bcbac62e356d05bdde488fc9f0eef7084a: patman: Suppress duplicate signoffs only for real patches (2014-05-16 11:42:29 -0700) Masahiro Yamada (2): Revert sandbox: move source files from board/ to arch/sandbox/ sandbox: set sandbox's vendor to null Simon Glass (1): patman: Suppress duplicate signoffs only for real patches arch/sandbox/lib/Makefile | 2 +- board/sandbox/Makefile| 7 +++ {doc = board/sandbox}/README.sandbox | 0 {arch/sandbox/lib = board/sandbox}/sandbox.c | 0 boards.cfg| 2 +- tools/patman/patchstream.py | 3 ++- 6 files changed, 11 insertions(+), 3 deletions(-) create mode 100644 board/sandbox/Makefile rename {doc = board/sandbox}/README.sandbox (100%) rename {arch/sandbox/lib = board/sandbox}/sandbox.c (100%) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch 'tom'
On Fri, May 09, 2014 at 04:36:01PM -0600, Simon Glass wrote: Hi Tom, This collects together the patches in my queue. I have taken the liberty of also adding 'Make 'run' use run_command_list() instead of run_command()' which is here: http://patchwork.ozlabs.org/patch/286250/ - Simon The following changes since commit 146b468eb0203c9b1aa1de93723ffc82c85d1dc1: Merge branch 'master' of git://git.denx.de/u-boot-sparc (2014-05-09 11:09:59 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 097c5de5f4a64d3b121dc1dbe020f7f2545dabdb: sandbox: ignore sandbox.dtb (2014-05-09 14:51:20 -0600) Masahiro Yamada (2): sandbox: move source files from board/ to arch/sandbox/ sandbox: ignore sandbox.dtb Simon Glass (6): sandbox: Support 'env import' and 'env export' Make 'run' use run_command_list() instead of run_command() sandbox: Provide a build option to avoid using SDL sandbox: Update and expand the README patman: Deal with 'git apply' failures correctly patman: Avoid duplicate sign-offs README| 11 +++ arch/sandbox/config.mk| 6 ++ arch/sandbox/dts/.gitignore | 1 + arch/sandbox/lib/Makefile | 2 +- {board/sandbox/sandbox = arch/sandbox/lib}/sandbox.c | 0 board/sandbox/sandbox/Makefile| 7 -- board/sandbox/sandbox/README.sandbox | 91 -- boards.cfg| 2 +- common/cmd_nvedit.c | 31 common/main.c | 2 +- doc/README.sandbox| 299 ++ include/configs/sandbox.h | 16 +++- tools/patman/README | 1 + tools/patman/commit.py| 14 tools/patman/gitutil.py | 6 +- tools/patman/patchstream.py | 10 ++- 16 files changed, 379 insertions(+), 120 deletions(-) create mode 100644 arch/sandbox/dts/.gitignore rename {board/sandbox/sandbox = arch/sandbox/lib}/sandbox.c (100%) delete mode 100644 board/sandbox/sandbox/Makefile delete mode 100644 board/sandbox/sandbox/README.sandbox create mode 100644 doc/README.sandbox Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git branch 'tom'
Hi Tom, This collects together the patches in my queue. I have taken the liberty of also adding 'Make 'run' use run_command_list() instead of run_command()' which is here: http://patchwork.ozlabs.org/patch/286250/ - Simon The following changes since commit 146b468eb0203c9b1aa1de93723ffc82c85d1dc1: Merge branch 'master' of git://git.denx.de/u-boot-sparc (2014-05-09 11:09:59 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 097c5de5f4a64d3b121dc1dbe020f7f2545dabdb: sandbox: ignore sandbox.dtb (2014-05-09 14:51:20 -0600) Masahiro Yamada (2): sandbox: move source files from board/ to arch/sandbox/ sandbox: ignore sandbox.dtb Simon Glass (6): sandbox: Support 'env import' and 'env export' Make 'run' use run_command_list() instead of run_command() sandbox: Provide a build option to avoid using SDL sandbox: Update and expand the README patman: Deal with 'git apply' failures correctly patman: Avoid duplicate sign-offs README| 11 +++ arch/sandbox/config.mk| 6 ++ arch/sandbox/dts/.gitignore | 1 + arch/sandbox/lib/Makefile | 2 +- {board/sandbox/sandbox = arch/sandbox/lib}/sandbox.c | 0 board/sandbox/sandbox/Makefile| 7 -- board/sandbox/sandbox/README.sandbox | 91 -- boards.cfg| 2 +- common/cmd_nvedit.c | 31 common/main.c | 2 +- doc/README.sandbox| 299 ++ include/configs/sandbox.h | 16 +++- tools/patman/README | 1 + tools/patman/commit.py| 14 tools/patman/gitutil.py | 6 +- tools/patman/patchstream.py | 10 ++- 16 files changed, 379 insertions(+), 120 deletions(-) create mode 100644 arch/sandbox/dts/.gitignore rename {board/sandbox/sandbox = arch/sandbox/lib}/sandbox.c (100%) delete mode 100644 board/sandbox/sandbox/Makefile delete mode 100644 board/sandbox/sandbox/README.sandbox create mode 100644 doc/README.sandbox ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git misc
On Sat, Mar 22, 2014 at 04:31:19PM -0700, Simon Glass wrote: Hi Tom, Here are a few more things from my patchwork queue. I have tested with buildman. The following changes since commit 2c072c958bb544c72f0e848375803dbd6971f022: sandbox: config: Enable cros_ec emulation and related items (2014-03-17 20:05:50 -0600) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 659c89da8e48d44395120aeb2dd0d02d3fb24b67: patman: Use Patch-cc: instead of Cc: (2014-03-22 14:47:30 -0600) Patrice Bouchand (2): Add lzmadec command sandbox: Enable CONFIG_CMD_LZMADEC in sandbox.h Simon Glass (1): patman: Use Patch-cc: instead of Cc: common/Makefile | 3 +++ common/cmd_lzmadec.c| 52 include/configs/sandbox.h | 2 ++ tools/patman/README | 21 - tools/patman/patchstream.py | 4 ++-- 5 files changed, 71 insertions(+), 11 deletions(-) create mode 100644 common/cmd_lzmadec.c Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git misc
Hi Tom, Here are a few more things from my patchwork queue. I have tested with buildman. The following changes since commit 2c072c958bb544c72f0e848375803dbd6971f022: sandbox: config: Enable cros_ec emulation and related items (2014-03-17 20:05:50 -0600) are available in the git repository at: git://git.denx.de/u-boot-x86.git for you to fetch changes up to 659c89da8e48d44395120aeb2dd0d02d3fb24b67: patman: Use Patch-cc: instead of Cc: (2014-03-22 14:47:30 -0600) Patrice Bouchand (2): Add lzmadec command sandbox: Enable CONFIG_CMD_LZMADEC in sandbox.h Simon Glass (1): patman: Use Patch-cc: instead of Cc: common/Makefile | 3 +++ common/cmd_lzmadec.c| 52 include/configs/sandbox.h | 2 ++ tools/patman/README | 21 - tools/patman/patchstream.py | 4 ++-- 5 files changed, 71 insertions(+), 11 deletions(-) create mode 100644 common/cmd_lzmadec.c Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git branch sandbox
On Mon, Mar 17, 2014 at 08:15:54PM -0600, Simon Glass wrote: Hi Tom, This collects up all the remaining sandbox changes to get the LCD/keyboard emulation running in U-Boot. Most of this was submitted for the last release but I had to hold back because the LCD was enabled by default - I think it is better to have it disabled by default as mentioned at the time. buildman shows no new problems, although unfortunately between me running it and now, mainline is updated. So I'll start a new run now and advise tomorrow if anything comes to light. If it doesn't suit to pick these up now, let me know and I can re-issue later. The following changes since commit bf64035a159f114d0fb93391acb7f5e73eb020e6: mtd: spi: Fix page size for S25FL032P,S25FL064P (2014-03-17 21:54:57 +0530) are available in the git repository at: git://git.denx.de/u-boot-x86.git sandbox for you to fetch changes up to 2c072c958bb544c72f0e848375803dbd6971f022: sandbox: config: Enable cros_ec emulation and related items (2014-03-17 20:05:50 -0600) Randall Spangler (2): cros_ec: Clean up multiple EC protocol support cros_ec: spi: Add support for EC protocol version 3 Simon Glass (26): Use a const pointer for map_to_sysmem() sandbox: Increase memory size to 32MB sandbox: Use os functions to read host device tree sandbox: dts: Add display and keyboard to sandbox cros_ec: Add an enum for the number of flash regions cros_ec: Add a function for reading a flash map entry cros_ec: Add a function for decoding the Chrome OS EC flashmap cros_ec: Support systems with no EC interrupt cros_ec: Move #ifdef to permit flash region access cros_ec: Sync up with latest Chrome OS EC version cros_ec: Add base support for protocol v3 cros_ec: Correct comparison between signed and unsigned numbers cros_ec: sandbox: Add Chrome OS EC emulation sandbox: Plumb in Chrome OS EC emulation cros_ec: Implement I2C pass-through sandbox: Add os_jump_to_image() to run another executable sandbox: Add -j option to indicate a jump from a previous U-Boot sandbox: Add SDL library for LCD, keyboard, audio sandbox: Add a simple sound driver sandbox: Add LCD driver sound: Move Samsung-specific code into its own file sandbox: Deal with conflicting getenv() for SDL sandbox: Allow Ctrl-C to work in sandbox sandbox: Add options to clean up temporary files sandbox: Add implementation of spi_setup_slave_fdt() sandbox: config: Enable cros_ec emulation and related items Vadim Bendebury (2): cros_ec: Move EC interface into common library cros_ec: Drop old EC version support from EC driver arch/sandbox/config.mk| 5 + arch/sandbox/cpu/Makefile | 3 + arch/sandbox/cpu/cpu.c| 2 +- arch/sandbox/cpu/os.c | 103 +++- arch/sandbox/cpu/sdl.c| 341 arch/sandbox/cpu/start.c | 60 + arch/sandbox/cpu/state.c | 6 +- arch/sandbox/dts/sandbox.dts | 96 +++ arch/sandbox/include/asm/arch-sandbox/sound.h | 14 + arch/sandbox/include/asm/sdl.h| 118 + arch/sandbox/include/asm/state.h | 29 ++- arch/sandbox/include/asm/u-boot-sandbox.h | 3 + board/samsung/common/board.c | 29 +-- board/samsung/smdk5250/exynos5-dt.c | 1 - board/sandbox/sandbox/sandbox.c | 48 common/Makefile | 1 + common/board_f.c | 48 ++-- common/cros_ec.c | 44 common/lcd.c | 21 +- disk/part.c | 17 -- doc/device-tree-bindings/video/sandbox-fb.txt | 13 + drivers/input/cros_ec_keyb.c | 34 ++- drivers/misc/Makefile | 1 + drivers/misc/cros_ec.c| 611 drivers/misc/cros_ec_i2c.c| 64 ++--- drivers/misc/cros_ec_lpc.c| 80 +- drivers/misc/cros_ec_sandbox.c| 559 drivers/misc/cros_ec_spi.c| 30 +++ drivers/serial/sandbox.c | 10 +- drivers/sound/Makefile| 4 +- drivers/sound/sandbox.c | 23 ++ drivers/sound/sound-i2s.c | 208 +++ drivers/sound/sound.c | 221 +--- drivers/spi/sandbox_spi.c | 13 + drivers/video/Makefile
[U-Boot] Please pull u-boot-x86.git branch sandbox
Hi Tom, This collects up all the remaining sandbox changes to get the LCD/keyboard emulation running in U-Boot. Most of this was submitted for the last release but I had to hold back because the LCD was enabled by default - I think it is better to have it disabled by default as mentioned at the time. buildman shows no new problems, although unfortunately between me running it and now, mainline is updated. So I'll start a new run now and advise tomorrow if anything comes to light. If it doesn't suit to pick these up now, let me know and I can re-issue later. The following changes since commit bf64035a159f114d0fb93391acb7f5e73eb020e6: mtd: spi: Fix page size for S25FL032P,S25FL064P (2014-03-17 21:54:57 +0530) are available in the git repository at: git://git.denx.de/u-boot-x86.git sandbox for you to fetch changes up to 2c072c958bb544c72f0e848375803dbd6971f022: sandbox: config: Enable cros_ec emulation and related items (2014-03-17 20:05:50 -0600) Randall Spangler (2): cros_ec: Clean up multiple EC protocol support cros_ec: spi: Add support for EC protocol version 3 Simon Glass (26): Use a const pointer for map_to_sysmem() sandbox: Increase memory size to 32MB sandbox: Use os functions to read host device tree sandbox: dts: Add display and keyboard to sandbox cros_ec: Add an enum for the number of flash regions cros_ec: Add a function for reading a flash map entry cros_ec: Add a function for decoding the Chrome OS EC flashmap cros_ec: Support systems with no EC interrupt cros_ec: Move #ifdef to permit flash region access cros_ec: Sync up with latest Chrome OS EC version cros_ec: Add base support for protocol v3 cros_ec: Correct comparison between signed and unsigned numbers cros_ec: sandbox: Add Chrome OS EC emulation sandbox: Plumb in Chrome OS EC emulation cros_ec: Implement I2C pass-through sandbox: Add os_jump_to_image() to run another executable sandbox: Add -j option to indicate a jump from a previous U-Boot sandbox: Add SDL library for LCD, keyboard, audio sandbox: Add a simple sound driver sandbox: Add LCD driver sound: Move Samsung-specific code into its own file sandbox: Deal with conflicting getenv() for SDL sandbox: Allow Ctrl-C to work in sandbox sandbox: Add options to clean up temporary files sandbox: Add implementation of spi_setup_slave_fdt() sandbox: config: Enable cros_ec emulation and related items Vadim Bendebury (2): cros_ec: Move EC interface into common library cros_ec: Drop old EC version support from EC driver arch/sandbox/config.mk| 5 + arch/sandbox/cpu/Makefile | 3 + arch/sandbox/cpu/cpu.c| 2 +- arch/sandbox/cpu/os.c | 103 +++- arch/sandbox/cpu/sdl.c| 341 arch/sandbox/cpu/start.c | 60 + arch/sandbox/cpu/state.c | 6 +- arch/sandbox/dts/sandbox.dts | 96 +++ arch/sandbox/include/asm/arch-sandbox/sound.h | 14 + arch/sandbox/include/asm/sdl.h| 118 + arch/sandbox/include/asm/state.h | 29 ++- arch/sandbox/include/asm/u-boot-sandbox.h | 3 + board/samsung/common/board.c | 29 +-- board/samsung/smdk5250/exynos5-dt.c | 1 - board/sandbox/sandbox/sandbox.c | 48 common/Makefile | 1 + common/board_f.c | 48 ++-- common/cros_ec.c | 44 common/lcd.c | 21 +- disk/part.c | 17 -- doc/device-tree-bindings/video/sandbox-fb.txt | 13 + drivers/input/cros_ec_keyb.c | 34 ++- drivers/misc/Makefile | 1 + drivers/misc/cros_ec.c| 611 drivers/misc/cros_ec_i2c.c| 64 ++--- drivers/misc/cros_ec_lpc.c| 80 +- drivers/misc/cros_ec_sandbox.c| 559 drivers/misc/cros_ec_spi.c| 30 +++ drivers/serial/sandbox.c | 10 +- drivers/sound/Makefile| 4 +- drivers/sound/sandbox.c | 23 ++ drivers/sound/sound-i2s.c | 208 +++ drivers/sound/sound.c | 221 +--- drivers/spi/sandbox_spi.c | 13 + drivers/video/Makefile| 1 + drivers/video/sandbox_sdl.c | 79 ++ include/common.h | 6 +
Re: [U-Boot] Please pull u-boot-x86.git branch sandbox2
On Wed, Jan 08, 2014 at 07:28:12PM -0700, Simon Glass wrote: Hi Tom, These are the first half of the sandbox enhancements. The second half may not make it before the release as I have found a few grey areas I want to check. ./tools/buildman/buildman -b x86-push -s Summary of 14 commits for 1195 boards (32 threads, 1 job per thread) 01: Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx blackfin: + bf561-acvilon cm-bf561 blackstamp br4 bct-brettl2 cm-bf527 dnp5370 bf506f-ezkit ip04 bf527-sdp bf609-ezkit bf537-stamp bf527-ezkit-v2 cm-bf537e tcm-bf518 cm-bf537u bf537-pnav cm-bf533 pr1 bf533-ezkit ibf-dsp561 bf537-srv1 cm-bf548 bf537-minotaur bf538f-ezkit bf548-ezkit bf525-ucr2 blackvme bf527-ezkit tcm-bf537 bf533-stamp bf518f-ezbrd bf527-ad7160-eval bf526-ezbrd bf561-ezkit m68k: + M54455EVB_a66 M5329AFEE M5249EVB idmr M5208EVBE eb_cpu5282 M5475FFE M54451EVB astro_mcf5373l M54418TWR_serial_rmii M54455EVB_intel M5282EVB M54455EVB_i66 M5475GFE M5253DEMO M54455EVB_stm33 M5485BFE M5485DFE TASREG M5329BFEE M52277EVB M5475EFE M5475CFE cobra5272 M5485AFE M53017EVB M5485HFE M5235EVB M5253EVBE M54418TWR_nand_mii M54418TWR_nand_rmii_lowfreq M5475BFE M5475DFE M5275EVB M52277EVB_stmicro eb_cpu5282_internal M54451EVB_stmicro M5271EVB M5485GFE M5373EVB M5485EFE M5485FFE M54418TWR M5235EVB_Flash32 M54418TWR_nand_rmii M54418TWR_serial_mii M5485CFE M54455EVB M5475AFE M5272C3 powerpc: + MVBLM7 MVSMR sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60 sh: + rsk7269 rsk7264 rsk7203 microblaze: + microblaze-generic openrisc: + openrisc-generic arm: + nitrogen6dl2g palmtc zipitz2 omap3_zoom2 mx6slevk nitrogen6s nitrogen6q wandboard_solo mini2440 titanium nitrogen6q2g wandboard_dl wandboard_quad mx6dlsabresd nitrogen6dl mx6qarm2 mx6qsabrelite mx6qsabresd mx6qsabreauto udoo_quad cam_enc_4xx nitrogen6s1g scb9328 cgtqmx6qeval balloon3 palmld mx1ads 02: Add crc8 routine 03: sandbox: block driver using host file/device as backing store 04: sandbox: Improve/augment memory allocation functions 05: sandbox: Correct help message arg garbling 06: sandbox: Allow return from board_init_f() 07: sandbox: Implement the bootm command for sandbox 08: sandbox: Allow the console to work earlier 09: sandbox: Add -i option to enter interactive mode 10: sandbox: Allow reading/writing of RAM buffer 11: sandbox: Add facility to save/restore sandbox state 12: sandbox: tpm: Add TPM emulation 13: sandbox: Add a prototype for cleanup_before_linux() 14: sandbox: tpm: Fix nvwrite command The following changes since commit e7be18225fbea76d1f0034b224f0d1e60f07cfcf: Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-01-06 14:07:08 -0500) are available in the git repository at: ssh://gu-...@git.denx.de/u-boot-x86.git sandbox2 for you to fetch changes up to 2c30af8f1861f09f217097460bfbea5ea691f8b8: sandbox: tpm: Fix nvwrite command (2014-01-08 17:26:17 -0700) Che-Liang Chiou (1): sandbox: tpm: Fix nvwrite command Henrik Nordström (1): sandbox: block driver using host file/device as backing store Simon Glass (11): Add crc8 routine sandbox: Improve/augment memory allocation functions sandbox: Correct help message arg garbling sandbox: Allow return from board_init_f() sandbox: Implement the bootm command for sandbox sandbox: Allow the console to work earlier sandbox: Add -i option to enter interactive mode sandbox: Allow reading/writing of RAM buffer sandbox: Add facility to save/restore sandbox state sandbox: tpm: Add TPM emulation sandbox: Add a prototype for cleanup_before_linux() arch/sandbox/cpu/cpu.c| 21 +++- arch/sandbox/cpu/os.c | 95 +- arch/sandbox/cpu/start.c | 96 +++--- arch/sandbox/cpu/state.c | 353 ++ arch/sandbox/include/asm/global_data.h| 2 +- arch/sandbox/include/asm/state.h | 128 arch/sandbox/include/asm/u-boot-sandbox.h | 2 + common/board_f.c | 15 ++- common/cmd_sandbox.c | 64 common/console.c | 16 ++- disk/part.c | 6 ++ drivers/block/Makefile| 1 + drivers/block/sandbox.c | 124 +++ drivers/tpm/Makefile | 1 + drivers/tpm/tpm_tis_sandbox.c | 260 include/config_fallbacks.h| 3 +- include/configs/sandbox.h | 5 + include/linux/crc8.h | 23 + include/os.h
[U-Boot] Please pull u-boot-x86.git branch sandbox2
Hi Tom, These are the first half of the sandbox enhancements. The second half may not make it before the release as I have found a few grey areas I want to check. ./tools/buildman/buildman -b x86-push -s Summary of 14 commits for 1195 boards (32 threads, 1 job per thread) 01: Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx blackfin: + bf561-acvilon cm-bf561 blackstamp br4 bct-brettl2 cm-bf527 dnp5370 bf506f-ezkit ip04 bf527-sdp bf609-ezkit bf537-stamp bf527-ezkit-v2 cm-bf537e tcm-bf518 cm-bf537u bf537-pnav cm-bf533 pr1 bf533-ezkit ibf-dsp561 bf537-srv1 cm-bf548 bf537-minotaur bf538f-ezkit bf548-ezkit bf525-ucr2 blackvme bf527-ezkit tcm-bf537 bf533-stamp bf518f-ezbrd bf527-ad7160-eval bf526-ezbrd bf561-ezkit m68k: + M54455EVB_a66 M5329AFEE M5249EVB idmr M5208EVBE eb_cpu5282 M5475FFE M54451EVB astro_mcf5373l M54418TWR_serial_rmii M54455EVB_intel M5282EVB M54455EVB_i66 M5475GFE M5253DEMO M54455EVB_stm33 M5485BFE M5485DFE TASREG M5329BFEE M52277EVB M5475EFE M5475CFE cobra5272 M5485AFE M53017EVB M5485HFE M5235EVB M5253EVBE M54418TWR_nand_mii M54418TWR_nand_rmii_lowfreq M5475BFE M5475DFE M5275EVB M52277EVB_stmicro eb_cpu5282_internal M54451EVB_stmicro M5271EVB M5485GFE M5373EVB M5485EFE M5485FFE M54418TWR M5235EVB_Flash32 M54418TWR_nand_rmii M54418TWR_serial_mii M5485CFE M54455EVB M5475AFE M5272C3 powerpc: + MVBLM7 MVSMR sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60 sh: + rsk7269 rsk7264 rsk7203 microblaze: + microblaze-generic openrisc: + openrisc-generic arm: + nitrogen6dl2g palmtc zipitz2 omap3_zoom2 mx6slevk nitrogen6s nitrogen6q wandboard_solo mini2440 titanium nitrogen6q2g wandboard_dl wandboard_quad mx6dlsabresd nitrogen6dl mx6qarm2 mx6qsabrelite mx6qsabresd mx6qsabreauto udoo_quad cam_enc_4xx nitrogen6s1g scb9328 cgtqmx6qeval balloon3 palmld mx1ads 02: Add crc8 routine 03: sandbox: block driver using host file/device as backing store 04: sandbox: Improve/augment memory allocation functions 05: sandbox: Correct help message arg garbling 06: sandbox: Allow return from board_init_f() 07: sandbox: Implement the bootm command for sandbox 08: sandbox: Allow the console to work earlier 09: sandbox: Add -i option to enter interactive mode 10: sandbox: Allow reading/writing of RAM buffer 11: sandbox: Add facility to save/restore sandbox state 12: sandbox: tpm: Add TPM emulation 13: sandbox: Add a prototype for cleanup_before_linux() 14: sandbox: tpm: Fix nvwrite command The following changes since commit e7be18225fbea76d1f0034b224f0d1e60f07cfcf: Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-01-06 14:07:08 -0500) are available in the git repository at: ssh://gu-...@git.denx.de/u-boot-x86.git sandbox2 for you to fetch changes up to 2c30af8f1861f09f217097460bfbea5ea691f8b8: sandbox: tpm: Fix nvwrite command (2014-01-08 17:26:17 -0700) Che-Liang Chiou (1): sandbox: tpm: Fix nvwrite command Henrik Nordström (1): sandbox: block driver using host file/device as backing store Simon Glass (11): Add crc8 routine sandbox: Improve/augment memory allocation functions sandbox: Correct help message arg garbling sandbox: Allow return from board_init_f() sandbox: Implement the bootm command for sandbox sandbox: Allow the console to work earlier sandbox: Add -i option to enter interactive mode sandbox: Allow reading/writing of RAM buffer sandbox: Add facility to save/restore sandbox state sandbox: tpm: Add TPM emulation sandbox: Add a prototype for cleanup_before_linux() arch/sandbox/cpu/cpu.c| 21 +++- arch/sandbox/cpu/os.c | 95 +- arch/sandbox/cpu/start.c | 96 +++--- arch/sandbox/cpu/state.c | 353 ++ arch/sandbox/include/asm/global_data.h| 2 +- arch/sandbox/include/asm/state.h | 128 arch/sandbox/include/asm/u-boot-sandbox.h | 2 + common/board_f.c | 15 ++- common/cmd_sandbox.c | 64 common/console.c | 16 ++- disk/part.c | 6 ++ drivers/block/Makefile| 1 + drivers/block/sandbox.c | 124 +++ drivers/tpm/Makefile | 1 + drivers/tpm/tpm_tis_sandbox.c | 260 include/config_fallbacks.h| 3 +- include/configs/sandbox.h | 5 + include/linux/crc8.h | 23 + include/os.h | 65 include/part.h| 5 + include/sandboxblockdev.h | 18 lib/Makefile
Re: [U-Boot] Please pull u-boot-x86.git
On Mon, Dec 09, 2013 at 01:27:38PM -0700, Simon Glass wrote: Hi Tom, Here is the sandbox SPI interface code. Buildman is clean: $ ./tools/buildman/buildman -b x86-push -s Summary of 7 commits for 1187 boards (32 threads, 1 job per thread) 01: Merge branch 'serial' of git://git.denx.de/u-boot-microblaze blackfin: + bf561-acvilon cm-bf561 blackstamp br4 bct-brettl2 cm-bf527 dnp5370 bf506f-ezkit ip04 bf527-sdp bf609-ezkit bf537-stamp bf527-ezkit-v2 cm-bf537e tcm-bf518 cm-bf537u bf537-pnav cm-bf533 pr1 bf533-ezkit ibf-dsp561 bf537-srv1 cm-bf548 bf537-minotaur bf538f-ezkit bf548-ezkit bf525-ucr2 blackvme bf527-ezkit tcm-bf537 bf533-stamp bf518f-ezbrd bf527-ad7160-eval bf526-ezbrd bf561-ezkit m68k: + M54455EVB_a66 M5329AFEE M5249EVB idmr M5208EVBE eb_cpu5282 M5475FFE M54451EVB astro_mcf5373l M54418TWR_serial_rmii M54455EVB_intel M5282EVB M54455EVB_i66 M5475GFE M5253DEMO M54455EVB_stm33 M5485BFE M5485DFE TASREG M5329BFEE M52277EVB M5475EFE M5475CFE cobra5272 M5485AFE M53017EVB M5485HFE M5235EVB M5253EVBE M54418TWR_nand_mii M54418TWR_nand_rmii_lowfreq M5475BFE M5475DFE M5275EVB M52277EVB_stmicro eb_cpu5282_internal M54451EVB_stmicro M5271EVB M5485GFE M5485EFE M5485FFE M54418TWR M5235EVB_Flash32 M5373EVB M54418TWR_nand_rmii M54418TWR_serial_mii M5485CFE M54455EVB M5475AFE M5272C3 powerpc: + T2080QDS_SPIFLASH T2080QDS MVBLM7 T2080QDS_SDCARD linkstation_HGLAN T2080QDS_NAND MVSMR lcd4_lwmon5 sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60 sh: + rsk7269 rsk7264 rsk7203 microblaze: + microblaze-generic openrisc: + openrisc-generic arm: + pm9g45 qong nitrogen6dl2g palmtc zipitz2 omap3_zoom2 omap3_zoom1 omap3_overo goflexhome mx6slevk nitrogen6s nitrogen6q wandboard_solo davinci_sonata VCMA9 mini2440 omap730p2_cs3boot iconnect km_kirkwood_pci titanium ib62x0 lubbock ethernut5 zynq_dcc vpac270_nor_128 nitrogen6q2g colibri_pxa270 sheevaplug kzm9g wandboard_dl wandboard_quad am3517_crane mx6dlsabresd zynq tnetv107x_evm xaeniax devkit8000 nitrogen6dl mx6qarm2 magnesium mx6qsabrelite mx6qsabresd palmtreo680 kmsuv31 polaris omap3_sdp3430 imx27lite mgcoge3un mx6qsabreauto vpac270_nor_256 pxa255_idp udoo_quad kmnusa omap730p2_cs0boot kmcoge5un am3517_evm nhk8815_onenand openrd_client omap730p2 openrd_base nhk8815 km_kirkwood dns325 mcx lp8x4x vpac270_ond_256 smdk2410 cam_enc_4xx h2200 nitrogen6s1g scb9328 jornada cgtqmx6qeval balloon3 omap3_evm omap3_logic dockstar portl2 palmld openrd_ultimate trizepsiv pogo_e02 pm9263 mx1ads 02: sandbox: Rename sb_cmdline_option to sandbox_cmdline_option 03: spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT node 04: spi: Add device tree binding for SPI bus 05: sandbox: spi: Add SPI emulation bus 06: sandbox: spi: Add new SPI flash driver 07: sandbox: spi: Enable new spi/sf layers The following changes since commit f44483b57c49282299da0e5c10073b909cdad979: Merge branch 'serial' of git://git.denx.de/u-boot-microblaze (2013-12-02 08:48:02 -0500) are available in the git repository at: ssh://gu-...@git.denx.de/u-boot-x86.git spi for you to fetch changes up to ca9a501953ce945da8e76d86a0ddf070a7f729b8: sandbox: spi: Enable new spi/sf layers (2013-12-09 12:22:42 -0700) Mike Frysinger (3): sandbox: spi: Add SPI emulation bus sandbox: spi: Add new SPI flash driver sandbox: spi: Enable new spi/sf layers Simon Glass (3): sandbox: Rename sb_cmdline_option to sandbox_cmdline_option spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT node spi: Add device tree binding for SPI bus arch/sandbox/cpu/os.c| 2 +- arch/sandbox/cpu/start.c | 17 +- arch/sandbox/include/asm/config.h| 8 + arch/sandbox/include/asm/getopt.h| 23 +- arch/sandbox/include/asm/sections.h | 4 +- arch/sandbox/include/asm/spi.h | 58 arch/sandbox/include/asm/state.h | 9 + board/sandbox/sandbox/README.sandbox | 54 doc/SPI/README.sandbox-spi | 64 doc/device-tree-bindings/spi/spi-bus.txt | 92 ++ drivers/misc/cros_ec_spi.c | 3 +- drivers/mtd/spi/Makefile | 1 + drivers/mtd/spi/sandbox.c| 483 +++ drivers/mtd/spi/sf_internal.h| 1 + drivers/mtd/spi/sf_probe.c | 28 +- drivers/spi/Makefile | 1 + drivers/spi/exynos_spi.c | 10 +- drivers/spi/sandbox_spi.c| 204 + drivers/spi/spi.c| 19 ++ include/configs/exynos5250-dt.h | 1 + include/configs/sandbox.h| 10 + include/spi.h| 23 +- include/spi_flash.h | 13 + 23 files changed, 1088 insertions(+),
[U-Boot] Please pull u-boot-x86.git
Hi Tom, Here is the sandbox SPI interface code. Buildman is clean: $ ./tools/buildman/buildman -b x86-push -s Summary of 7 commits for 1187 boards (32 threads, 1 job per thread) 01: Merge branch 'serial' of git://git.denx.de/u-boot-microblaze blackfin: + bf561-acvilon cm-bf561 blackstamp br4 bct-brettl2 cm-bf527 dnp5370 bf506f-ezkit ip04 bf527-sdp bf609-ezkit bf537-stamp bf527-ezkit-v2 cm-bf537e tcm-bf518 cm-bf537u bf537-pnav cm-bf533 pr1 bf533-ezkit ibf-dsp561 bf537-srv1 cm-bf548 bf537-minotaur bf538f-ezkit bf548-ezkit bf525-ucr2 blackvme bf527-ezkit tcm-bf537 bf533-stamp bf518f-ezbrd bf527-ad7160-eval bf526-ezbrd bf561-ezkit m68k: + M54455EVB_a66 M5329AFEE M5249EVB idmr M5208EVBE eb_cpu5282 M5475FFE M54451EVB astro_mcf5373l M54418TWR_serial_rmii M54455EVB_intel M5282EVB M54455EVB_i66 M5475GFE M5253DEMO M54455EVB_stm33 M5485BFE M5485DFE TASREG M5329BFEE M52277EVB M5475EFE M5475CFE cobra5272 M5485AFE M53017EVB M5485HFE M5235EVB M5253EVBE M54418TWR_nand_mii M54418TWR_nand_rmii_lowfreq M5475BFE M5475DFE M5275EVB M52277EVB_stmicro eb_cpu5282_internal M54451EVB_stmicro M5271EVB M5485GFE M5485EFE M5485FFE M54418TWR M5235EVB_Flash32 M5373EVB M54418TWR_nand_rmii M54418TWR_serial_mii M5485CFE M54455EVB M5475AFE M5272C3 powerpc: + T2080QDS_SPIFLASH T2080QDS MVBLM7 T2080QDS_SDCARD linkstation_HGLAN T2080QDS_NAND MVSMR lcd4_lwmon5 sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60 sh: + rsk7269 rsk7264 rsk7203 microblaze: + microblaze-generic openrisc: + openrisc-generic arm: + pm9g45 qong nitrogen6dl2g palmtc zipitz2 omap3_zoom2 omap3_zoom1 omap3_overo goflexhome mx6slevk nitrogen6s nitrogen6q wandboard_solo davinci_sonata VCMA9 mini2440 omap730p2_cs3boot iconnect km_kirkwood_pci titanium ib62x0 lubbock ethernut5 zynq_dcc vpac270_nor_128 nitrogen6q2g colibri_pxa270 sheevaplug kzm9g wandboard_dl wandboard_quad am3517_crane mx6dlsabresd zynq tnetv107x_evm xaeniax devkit8000 nitrogen6dl mx6qarm2 magnesium mx6qsabrelite mx6qsabresd palmtreo680 kmsuv31 polaris omap3_sdp3430 imx27lite mgcoge3un mx6qsabreauto vpac270_nor_256 pxa255_idp udoo_quad kmnusa omap730p2_cs0boot kmcoge5un am3517_evm nhk8815_onenand openrd_client omap730p2 openrd_base nhk8815 km_kirkwood dns325 mcx lp8x4x vpac270_ond_256 smdk2410 cam_enc_4xx h2200 nitrogen6s1g scb9328 jornada cgtqmx6qeval balloon3 omap3_evm omap3_logic dockstar portl2 palmld openrd_ultimate trizepsiv pogo_e02 pm9263 mx1ads 02: sandbox: Rename sb_cmdline_option to sandbox_cmdline_option 03: spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT node 04: spi: Add device tree binding for SPI bus 05: sandbox: spi: Add SPI emulation bus 06: sandbox: spi: Add new SPI flash driver 07: sandbox: spi: Enable new spi/sf layers The following changes since commit f44483b57c49282299da0e5c10073b909cdad979: Merge branch 'serial' of git://git.denx.de/u-boot-microblaze (2013-12-02 08:48:02 -0500) are available in the git repository at: ssh://gu-...@git.denx.de/u-boot-x86.git spi for you to fetch changes up to ca9a501953ce945da8e76d86a0ddf070a7f729b8: sandbox: spi: Enable new spi/sf layers (2013-12-09 12:22:42 -0700) Mike Frysinger (3): sandbox: spi: Add SPI emulation bus sandbox: spi: Add new SPI flash driver sandbox: spi: Enable new spi/sf layers Simon Glass (3): sandbox: Rename sb_cmdline_option to sandbox_cmdline_option spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT node spi: Add device tree binding for SPI bus arch/sandbox/cpu/os.c| 2 +- arch/sandbox/cpu/start.c | 17 +- arch/sandbox/include/asm/config.h| 8 + arch/sandbox/include/asm/getopt.h| 23 +- arch/sandbox/include/asm/sections.h | 4 +- arch/sandbox/include/asm/spi.h | 58 arch/sandbox/include/asm/state.h | 9 + board/sandbox/sandbox/README.sandbox | 54 doc/SPI/README.sandbox-spi | 64 doc/device-tree-bindings/spi/spi-bus.txt | 92 ++ drivers/misc/cros_ec_spi.c | 3 +- drivers/mtd/spi/Makefile | 1 + drivers/mtd/spi/sandbox.c| 483 +++ drivers/mtd/spi/sf_internal.h| 1 + drivers/mtd/spi/sf_probe.c | 28 +- drivers/spi/Makefile | 1 + drivers/spi/exynos_spi.c | 10 +- drivers/spi/sandbox_spi.c| 204 + drivers/spi/spi.c| 19 ++ include/configs/exynos5250-dt.h | 1 + include/configs/sandbox.h| 10 + include/spi.h| 23 +- include/spi_flash.h | 13 + 23 files changed, 1088 insertions(+), 40 deletions(-) create mode 100644 arch/sandbox/include/asm/spi.h create mode 100644 doc/SPI/README.sandbox-spi create mode 100644
Re: [U-Boot] Please pull u-boot-x86.git
On Thu, Nov 21, 2013 at 01:40:17PM -0700, Simon Glass wrote: The following changes since commit c2e5e802ecb7ab668ce9911b210ed68c804b349f: Merge branch 'master' of git://git.denx.de/u-boot-mips (2013-11-17 14:11:34 -0500) are available in the git repository at: http://git.denx.de/u-boot-x86.git buildpatman for you to fetch changes up to 8426d8b0899eb6a9845b3468662512a8da236241: buildman: make board selector argument a regex (2013-11-21 13:35:58 -0700) Albert ARIBAUD (1): patman: add Commit-notes tag and section Andreas Bie?mann (1): buildman: fix README Stephen Warren (1): buildman: make board selector argument a regex tools/buildman/README | 16 +++- tools/buildman/board.py | 12 +++- tools/patman/README | 10 +- tools/patman/commit.py | 2 ++ tools/patman/patchstream.py | 43 --- 5 files changed, 69 insertions(+), 14 deletions(-) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
The following changes since commit c2e5e802ecb7ab668ce9911b210ed68c804b349f: Merge branch 'master' of git://git.denx.de/u-boot-mips (2013-11-17 14:11:34 -0500) are available in the git repository at: http://git.denx.de/u-boot-x86.git buildpatman for you to fetch changes up to 8426d8b0899eb6a9845b3468662512a8da236241: buildman: make board selector argument a regex (2013-11-21 13:35:58 -0700) Albert ARIBAUD (1): patman: add Commit-notes tag and section Andreas Bießmann (1): buildman: fix README Stephen Warren (1): buildman: make board selector argument a regex tools/buildman/README | 16 +++- tools/buildman/board.py | 12 +++- tools/patman/README | 10 +- tools/patman/commit.py | 2 ++ tools/patman/patchstream.py | 43 --- 5 files changed, 69 insertions(+), 14 deletions(-) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Mon, May 13, 2013 at 03:02:08PM -0700, Simon Glass wrote: Hi Tom, The following changes since commit bbd0f7e3ba66d288a2f146f1c7797801e04598ae: Move FDT_RAMDISK_OVERHEAD from fdt.h to libfdt_env.h (2013-05-10 19:04:50 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git master for you to fetch changes up to 8f0278eab4410de57ea6a32a8e5a50614a28084f: x86: Add coreboot timestamps (2013-05-13 13:33:22 -0700) Doug Anderson (2): bootstage: Copy bootstage strings post-relocation Call bootstage_relocate() after malloc is initted Simon Glass (17): x86: Remove unused bios/pci code x86: Remove unused portion of link script x86: Remove legacy board init code x86: Declare global_data pointer when it is used x86: Implement panic output for coreboot x86: Rationalise kernel booting logic and bootstage x86: Add TSC timer x86: Remove old broken timer implementation x86: Remove ISR timer x86: Re-enable PCAT timer 2 for beeping bootstage: Add stubs for new bootstage functions x86: Enable bootstage for coreboot bootstage: Allow marking a particular line of code x86: Fix warning in cmd_ximg.c when CONFIG_GZIP is not defined x86: config: Enable LZO for coreboot, remove zlib, gzip x86: Support adding coreboot timestanps to bootstage x86: Add coreboot timestamps arch/x86/cpu/Makefile | 2 +- arch/x86/cpu/coreboot/coreboot.c | 13 arch/x86/cpu/coreboot/timestamp.c | 42 +++- arch/x86/cpu/cpu.c | 5 ++ arch/x86/cpu/interrupts.c | 2 + arch/x86/cpu/timer.c | 17 - arch/x86/cpu/u-boot.lds| 12 arch/x86/include/asm/arch-coreboot/timestamp.h | 7 ++ arch/x86/include/asm/init_helpers.h| 9 --- arch/x86/include/asm/init_wrappers.h | 42 arch/x86/include/asm/pci.h | 4 -- arch/x86/include/asm/u-boot-x86.h | 4 ++ arch/x86/include/asm/u-boot.h | 32 -- arch/x86/lib/Makefile | 10 +-- arch/x86/lib/bios.h| 170 arch/x86/lib/board.c | 266 arch/x86/lib/bootm.c | 8 --- arch/x86/lib/cmd_boot.c| 2 + arch/x86/lib/init_helpers.c| 98 arch/x86/lib/init_wrappers.c | 164 --- arch/x86/lib/pcat_timer.c | 69 +--- arch/x86/lib/pci.c | 188 -- arch/x86/lib/physmem.c | 2 + arch/x86/lib/relocate.c| 2 + arch/x86/lib/timer.c | 116 - arch/x86/lib/tsc_timer.c | 107 +++ arch/x86/lib/zimage.c | 11 ++-- common/board_r.c | 1 + common/bootstage.c | 44 + common/cmd_ximg.c | 2 + include/bootstage.h| 54 include/configs/coreboot.h | 18 +- 32 files changed, 314 insertions(+), 1209 deletions(-) delete mode 100644 arch/x86/cpu/timer.c delete mode 100644 arch/x86/include/asm/init_wrappers.h delete mode 100644 arch/x86/lib/bios.h delete mode 100644 arch/x86/lib/board.c delete mode 100644 arch/x86/lib/init_wrappers.c delete mode 100644 arch/x86/lib/pci.c delete mode 100644 arch/x86/lib/timer.c create mode 100644 arch/x86/lib/tsc_timer.c Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, The following changes since commit bbd0f7e3ba66d288a2f146f1c7797801e04598ae: Move FDT_RAMDISK_OVERHEAD from fdt.h to libfdt_env.h (2013-05-10 19:04:50 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git master for you to fetch changes up to 8f0278eab4410de57ea6a32a8e5a50614a28084f: x86: Add coreboot timestamps (2013-05-13 13:33:22 -0700) Doug Anderson (2): bootstage: Copy bootstage strings post-relocation Call bootstage_relocate() after malloc is initted Simon Glass (17): x86: Remove unused bios/pci code x86: Remove unused portion of link script x86: Remove legacy board init code x86: Declare global_data pointer when it is used x86: Implement panic output for coreboot x86: Rationalise kernel booting logic and bootstage x86: Add TSC timer x86: Remove old broken timer implementation x86: Remove ISR timer x86: Re-enable PCAT timer 2 for beeping bootstage: Add stubs for new bootstage functions x86: Enable bootstage for coreboot bootstage: Allow marking a particular line of code x86: Fix warning in cmd_ximg.c when CONFIG_GZIP is not defined x86: config: Enable LZO for coreboot, remove zlib, gzip x86: Support adding coreboot timestanps to bootstage x86: Add coreboot timestamps arch/x86/cpu/Makefile | 2 +- arch/x86/cpu/coreboot/coreboot.c | 13 arch/x86/cpu/coreboot/timestamp.c | 42 +++- arch/x86/cpu/cpu.c | 5 ++ arch/x86/cpu/interrupts.c | 2 + arch/x86/cpu/timer.c | 17 - arch/x86/cpu/u-boot.lds| 12 arch/x86/include/asm/arch-coreboot/timestamp.h | 7 ++ arch/x86/include/asm/init_helpers.h| 9 --- arch/x86/include/asm/init_wrappers.h | 42 arch/x86/include/asm/pci.h | 4 -- arch/x86/include/asm/u-boot-x86.h | 4 ++ arch/x86/include/asm/u-boot.h | 32 -- arch/x86/lib/Makefile | 10 +-- arch/x86/lib/bios.h| 170 arch/x86/lib/board.c | 266 arch/x86/lib/bootm.c | 8 --- arch/x86/lib/cmd_boot.c| 2 + arch/x86/lib/init_helpers.c| 98 arch/x86/lib/init_wrappers.c | 164 --- arch/x86/lib/pcat_timer.c | 69 +--- arch/x86/lib/pci.c | 188 -- arch/x86/lib/physmem.c | 2 + arch/x86/lib/relocate.c| 2 + arch/x86/lib/timer.c | 116 - arch/x86/lib/tsc_timer.c | 107 +++ arch/x86/lib/zimage.c | 11 ++-- common/board_r.c | 1 + common/bootstage.c | 44 + common/cmd_ximg.c | 2 + include/bootstage.h| 54 include/configs/coreboot.h | 18 +- 32 files changed, 314 insertions(+), 1209 deletions(-) delete mode 100644 arch/x86/cpu/timer.c delete mode 100644 arch/x86/include/asm/init_wrappers.h delete mode 100644 arch/x86/lib/bios.h delete mode 100644 arch/x86/lib/board.c delete mode 100644 arch/x86/lib/init_wrappers.c delete mode 100644 arch/x86/lib/pci.c delete mode 100644 arch/x86/lib/timer.c create mode 100644 arch/x86/lib/tsc_timer.c Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Thu, May 09, 2013 at 02:30:22PM -0700, Simon Glass wrote: Hi Tom, I left out the one that is not yet reviewed. The following changes since commit 4e779ad2e54e39d5343c8c83b4fc686a7bb16859: gpio: Add support for microblaze xilinx GPIO (2013-05-09 11:20:08 +0200) are available in the git repository at: git://git.denx.de/u-boot-x86.git patman for you to fetch changes up to e85707570cf44f7b2d1da5ae92af3684c72c28f2: patman: Do not hardcode python path (2013-05-09 14:27:41 -0700) Michal Simek (1): patman: Do not hardcode python path Simon Glass (1): buildman: Allow conflicting tags to avoid spurious errors tools/buildman/control.py | 5 + tools/patman/patman.py| 2 +- tools/patman/series.py| 4 +++- 3 files changed, 9 insertions(+), 2 deletions(-) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, I left out the one that is not yet reviewed. The following changes since commit 4e779ad2e54e39d5343c8c83b4fc686a7bb16859: gpio: Add support for microblaze xilinx GPIO (2013-05-09 11:20:08 +0200) are available in the git repository at: git://git.denx.de/u-boot-x86.git patman for you to fetch changes up to e85707570cf44f7b2d1da5ae92af3684c72c28f2: patman: Do not hardcode python path (2013-05-09 14:27:41 -0700) Michal Simek (1): patman: Do not hardcode python path Simon Glass (1): buildman: Allow conflicting tags to avoid spurious errors tools/buildman/control.py | 5 + tools/patman/patman.py| 2 +- tools/patman/series.py| 4 +++- 3 files changed, 9 insertions(+), 2 deletions(-) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, [sorry, take 2] Unfortunately I found some problems in x86 that I had not picked up on earlier. The following changes since commit cba6494f24d711ba63afb22b1ee691a41fee121c: Prepare v2013.04-rc3 (2013-04-15 11:47:10 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git master for you to fetch changes up to 054fcf6b562cd80a5e8cbf0fa61db9e8695fe3e4: x86: Fix wrong 4G filtering (2013-04-15 16:39:57 -0700) Simon Glass (3): x86: Fix DRAM bank size init with generic board x86: Allow setup code to manage its own global data x86: config: Init PCI before SPI Vladimir 'φ-coder/phcoder' Serbinenko (1): x86: Fix wrong 4G filtering arch/x86/cpu/coreboot/sdram.c | 12 ++-- common/board_f.c | 5 ++--- common/board_r.c | 3 --- include/configs/coreboot.h| 1 + 4 files changed, 13 insertions(+), 8 deletions(-) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Tue, Apr 16, 2013 at 12:15:36PM -0700, Simon Glass wrote: Vladimir '?-coder/phcoder' Serbinenko (1): x86: Fix wrong 4G filtering Two problems. First, this is missing a signed-off-by line. Second, nicnames in the author field are frowned upon to not allowed here. Thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
Hi Tom, [Trying again with the offending patch removed for now] The following changes since commit cba6494f24d711ba63afb22b1ee691a41fee121c: Prepare v2013.04-rc3 (2013-04-15 11:47:10 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git master for you to fetch changes up to 617c246f3c123d4a2d4dba9d08a4a2dd324cb407: x86: config: Init PCI before SPI (2013-04-15 16:26:43 -0700) Simon Glass (3): x86: Fix DRAM bank size init with generic board x86: Allow setup code to manage its own global data x86: config: Init PCI before SPI arch/x86/cpu/coreboot/sdram.c | 7 ++- common/board_f.c | 5 ++--- common/board_r.c | 3 --- include/configs/coreboot.h| 1 + 4 files changed, 9 insertions(+), 7 deletions(-) Regards, Simon On Tue, Apr 16, 2013 at 12:53 PM, Tom Rini tr...@ti.com wrote: On Tue, Apr 16, 2013 at 12:15:36PM -0700, Simon Glass wrote: Vladimir '?-coder/phcoder' Serbinenko (1): x86: Fix wrong 4G filtering Two problems. First, this is missing a signed-off-by line. Second, nicnames in the author field are frowned upon to not allowed here. Thanks! -- Tom ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Tue, Apr 16, 2013 at 01:07:33PM -0700, Simon Glass wrote: Hi Tom, [Trying again with the offending patch removed for now] The following changes since commit cba6494f24d711ba63afb22b1ee691a41fee121c: Prepare v2013.04-rc3 (2013-04-15 11:47:10 -0400) are available in the git repository at: git://git.denx.de/u-boot-x86.git master for you to fetch changes up to 617c246f3c123d4a2d4dba9d08a4a2dd324cb407: x86: config: Init PCI before SPI (2013-04-15 16:26:43 -0700) Simon Glass (3): x86: Fix DRAM bank size init with generic board x86: Allow setup code to manage its own global data x86: config: Init PCI before SPI arch/x86/cpu/coreboot/sdram.c | 7 ++- common/board_f.c | 5 ++--- common/board_r.c | 3 --- include/configs/coreboot.h| 1 + 4 files changed, 9 insertions(+), 7 deletions(-) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Mon, Mar 04, 2013 at 04:01:52PM -0800, Simon Glass wrote: Hi Tom, Great to see the previous lot made it in. Here is the next x86 series. The following changes since commit 2536850d7cd90bdb75bf3ff86838f913392b68db: Prepare v2013.04-rc1 (2013-03-04 16:29:17 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git master for you to fetch changes up to fc959081d41aab2d6f4614c5fb3dd1b77ffcdcf4: x86: Enable CONFIG_OF_CONTROL on coreboot (2013-03-04 15:57:52 -0800) Simon Glass (9): x86: Add function to get top of usable ram x86: Add basic cache operations x86: Permit bootstage and timer data to be used prior to relocation x86: Add an __end symbol to signal the end of the U-Boot binary x86: Rearrange the output input to remove BSS x86: Support relocation of FDT on start-up x86: Add error checking to x86 relocation code x86: Adjust link device tree include file x86: Enable CONFIG_OF_CONTROL on coreboot arch/x86/cpu/coreboot/coreboot.c| 15 +--- arch/x86/cpu/coreboot/sdram.c | 18 +++--- arch/x86/cpu/cpu.c | 23 + arch/x86/cpu/interrupts.c | 7 +++--- arch/x86/cpu/u-boot.lds | 21 ++-- arch/x86/include/asm/global_data.h | 4 +++ arch/x86/include/asm/init_helpers.h | 2 ++ arch/x86/include/asm/relocate.h | 1 + arch/x86/include/asm/u-boot-x86.h | 1 + arch/x86/lib/board.c| 3 +++ arch/x86/lib/init_helpers.c | 49 - arch/x86/lib/init_wrappers.c| 1 + arch/x86/lib/relocate.c | 37 ++-- arch/x86/lib/timer.c| 9 +++ board/chromebook-x86/dts/link.dts | 2 +- include/configs/coreboot.h | 6 + 16 files changed, 146 insertions(+), 53 deletions(-) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Thu, Feb 28, 2013 at 07:55:39PM -0800, Simon Glass wrote: [snip] The following changes since commit a1eac57a2001ecf86a46f520cd85ef8e9c8b3687: common/env_nand.c: calculate crc only when readenv was OK (2013-02-22 19:59:53 -0600) are available in the git repository at: git://git.denx.de/u-boot-x86.git mem for you to fetch changes up to 218da0f35f4b5e5bf13d3dba6d975d4d5d65516f: hash: Use lower case for hash algorithm names (2013-02-28 19:49:13 -0800) Allen Martin (1): sandbox: fix compiler warning Simon Glass (21): Tidy up error checking and fix bug in hash command Update print_buffer() to use const sandbox: Add un/map_sysmen() to deal with sandbox's ram_buf sandbox: Change memory commands to use map_physmem Split out the memory tests into separate functions Use common mtest iteration counting Fix mtest indenting Bring mtest putc() into common code Reduce casting in mtest Update set_working_fdt_addr() to use setenv_addr() common: Use new numeric setenv functions fs: Use new numeric setenv functions net: Use new numeric setenv functions image: Use crc header file instead of C prototypes hash: Add a flag to support saving hashes in the environment Roll crc32 into hash infrastructure sandbox: config: Enable hash functions and mtest Move CONFIG_SYS_MEMTEST_SCRATCH #ifdef to top of file sandbox: Update mtest to fix crashes sandbox: Allow hash functions to work correctly hash: Use lower case for hash algorithm names Taylor Hutt (1): sandbox: Improve sandbox serial port keyboard interface README| 9 + arch/sandbox/config.mk| 1 + arch/sandbox/cpu/os.c | 8 + arch/sandbox/cpu/start.c | 3 + arch/sandbox/include/asm/io.h | 10 + common/cmd_bootm.c| 11 +- common/cmd_cbfs.c | 4 +- common/cmd_cramfs.c | 4 +- common/cmd_fdos.c | 4 +- common/cmd_fdt.c | 11 +- common/cmd_hash.c | 14 +- common/cmd_jffs2.c| 4 +- common/cmd_load.c | 12 +- common/cmd_mem.c | 809 common/cmd_mtdparts.c | 4 +- common/cmd_nand.c | 12 +- common/cmd_nvedit.c | 11 +- common/cmd_reiser.c | 4 +- common/cmd_setexpr.c | 39 +++- common/cmd_sha1sum.c | 6 +- common/cmd_unzip.c| 4 +- common/cmd_ximg.c | 7 +- common/cmd_zfs.c | 3 +- common/cmd_zip.c | 4 +- common/hash.c | 194 +++- common/image.c| 4 +- drivers/net/fm/fm.c | 4 +- drivers/serial/sandbox.c | 44 +++- fs/fs.c | 4 +- fs/ubifs/ubifs.c | 4 +- include/common.h | 29 ++- include/configs/sandbox.h | 9 +- include/hash.h| 13 +- include/os.h | 10 + include/u-boot/crc.h | 11 + lib/crc32.c | 9 + lib/display_options.c | 3 +- net/net.c | 8 +- 38 files changed, 761 insertions(+), 583 deletions(-) Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Please pull u-boot-x86.git
Hi Tom, Great to see the previous lot made it in. Here is the next x86 series. The following changes since commit 2536850d7cd90bdb75bf3ff86838f913392b68db: Prepare v2013.04-rc1 (2013-03-04 16:29:17 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git master for you to fetch changes up to fc959081d41aab2d6f4614c5fb3dd1b77ffcdcf4: x86: Enable CONFIG_OF_CONTROL on coreboot (2013-03-04 15:57:52 -0800) Simon Glass (9): x86: Add function to get top of usable ram x86: Add basic cache operations x86: Permit bootstage and timer data to be used prior to relocation x86: Add an __end symbol to signal the end of the U-Boot binary x86: Rearrange the output input to remove BSS x86: Support relocation of FDT on start-up x86: Add error checking to x86 relocation code x86: Adjust link device tree include file x86: Enable CONFIG_OF_CONTROL on coreboot arch/x86/cpu/coreboot/coreboot.c| 15 +--- arch/x86/cpu/coreboot/sdram.c | 18 +++--- arch/x86/cpu/cpu.c | 23 + arch/x86/cpu/interrupts.c | 7 +++--- arch/x86/cpu/u-boot.lds | 21 ++-- arch/x86/include/asm/global_data.h | 4 +++ arch/x86/include/asm/init_helpers.h | 2 ++ arch/x86/include/asm/relocate.h | 1 + arch/x86/include/asm/u-boot-x86.h | 1 + arch/x86/lib/board.c| 3 +++ arch/x86/lib/init_helpers.c | 49 - arch/x86/lib/init_wrappers.c| 1 + arch/x86/lib/relocate.c | 37 ++-- arch/x86/lib/timer.c| 9 +++ board/chromebook-x86/dts/link.dts | 2 +- include/configs/coreboot.h | 6 + 16 files changed, 146 insertions(+), 53 deletions(-) Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 02/28/2013 10:55 PM, Simon Glass wrote: Hi Tom, On Thu, Feb 28, 2013 at 4:22 PM, Simon Glass s...@chromium.org wrote: Hi Tom, On Thu, Feb 28, 2013 at 3:00 PM, Tom Rini tr...@ti.com wrote: On Wed, Feb 27, 2013 at 01:18:23PM -0800, Simon Glass wrote: Hi Tom, I have pulled the latest series into a branch in the x86 tree. You can also get it from patchwork. If you are happy with it, please see below. I haven't seen any comments for a few days. OK, building with ELDK4.2 for a number of ARM boards such as igep0030: cmd_mem.c: In function 'do_mem_mtest': cmd_mem.c:979: warning: passing argument 1 of 'unmap_sysmem' discards qualifiers from pointer target type cmd_mem.c:980: warning: passing argument 1 of 'unmap_sysmem' discards qualifiers from pointer target type Strange - there is even an explicit cast,. But mine is gcc 4.4.1 so may be a bit later. I could just remove those two lines since they are only there for semantic correctness and compile to nothing anyway. But I will track down that tool chain and see if I can work out a fix. OK I have repeated this - it seems that the compiler does not like a direct 'cast away' of volatile in a function argument. I have added a work-around, and sent out an updated patch 20. You can either pull this in from patchwork, or I have updated the pull information below. Thanks, I'll give it a day or two in public before re-pulling. Rather ominously this might mean that I need to start building with multiple tool chains for each architecture. I was rather hoping to avoid that... Thanks for spotting it. Sadly, it's a must. ELDK4.2 is the oldest toolchain we support, but we do support it for ARM (except when THUMB is required, those fail gracefully tho). My build loops include ELDK4.2/arm, ELDK5.2/arm and whatever Linaro PPA has up, for ARM (and eldk5.2 for powerpc). - -- Tom -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRMLkvAAoJENk4IS6UOR1W5SUQAJ8a/lgm4/0IC3iQidTuhYr7 7/Xp3lwZkFvcIYYcV3hlMwejHwEZ6+YLynCNwRaRcLu2rPjrO2VrCyezFF0lXBRB +REFPzPelUWRmzNlJNE95rlf1R1Oj+NMalou/BLtP6UYP/BDsYqEO1DSg+b+xAzU 1ynx4Jbz/elszgII8On/rn6fjbLn1Nx8r+GvEd/EoZQNb4ykgp/P23FY5n1SpDav QgLsOBnoGNh3t+iM/d1Uqkp9SxaCmgVkgCVjWMYBsLrDB0lQKS92P3cXPQ7eYPPu wW3mlKxJI3E42X+XLxk961BmGvyzWDxs92/YW+ctTZ52jKmbBciD1+Yk7p7jlKLP inBPKmBChswzpZOyyg/aOCJ3DENc6ad8JQA5kELtn3wOlJJcwUDJdEzvaRFwvbQV qUqSO+aUjL6Kd7lvn72MI40sqgPxleP84fCy3ZjqFISGPtcFGrsc9NVteJM4k59R S6FEwYdWYarMhJq+1Q25tyfEMjUzvLLARdPx88nh97Ew4D7d3ZGt8ma6ClfO0/Ku dzS0bBhlRn2ZUfSHjPRl8SvoyjjRT19VO5zrucIupnU5Zx+wU4g1h/bMoGlDxTVw 3Yf8OhFCAXWnhPtsIQTj7KM5Asgl1waX5jc4afiEyTt+SqT2BNtcShjyfUR2c3gh pI2LEszwK0iD7K0E6p5m =oihH -END PGP SIGNATURE- ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Wed, Feb 27, 2013 at 01:18:23PM -0800, Simon Glass wrote: Hi Tom, I have pulled the latest series into a branch in the x86 tree. You can also get it from patchwork. If you are happy with it, please see below. I haven't seen any comments for a few days. OK, building with ELDK4.2 for a number of ARM boards such as igep0030: cmd_mem.c: In function 'do_mem_mtest': cmd_mem.c:979: warning: passing argument 1 of 'unmap_sysmem' discards qualifiers from pointer target type cmd_mem.c:980: warning: passing argument 1 of 'unmap_sysmem' discards qualifiers from pointer target type Please fix and re-submit, thanks. -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
Hi Tom, On Thu, Feb 28, 2013 at 3:00 PM, Tom Rini tr...@ti.com wrote: On Wed, Feb 27, 2013 at 01:18:23PM -0800, Simon Glass wrote: Hi Tom, I have pulled the latest series into a branch in the x86 tree. You can also get it from patchwork. If you are happy with it, please see below. I haven't seen any comments for a few days. OK, building with ELDK4.2 for a number of ARM boards such as igep0030: cmd_mem.c: In function 'do_mem_mtest': cmd_mem.c:979: warning: passing argument 1 of 'unmap_sysmem' discards qualifiers from pointer target type cmd_mem.c:980: warning: passing argument 1 of 'unmap_sysmem' discards qualifiers from pointer target type Strange - there is even an explicit cast,. But mine is gcc 4.4.1 so may be a bit later. I could just remove those two lines since they are only there for semantic correctness and compile to nothing anyway. But I will track down that tool chain and see if I can work out a fix. Regards, Simon Please fix and re-submit, thanks. -- Tom ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
Hi Tom, On Thu, Feb 28, 2013 at 4:22 PM, Simon Glass s...@chromium.org wrote: Hi Tom, On Thu, Feb 28, 2013 at 3:00 PM, Tom Rini tr...@ti.com wrote: On Wed, Feb 27, 2013 at 01:18:23PM -0800, Simon Glass wrote: Hi Tom, I have pulled the latest series into a branch in the x86 tree. You can also get it from patchwork. If you are happy with it, please see below. I haven't seen any comments for a few days. OK, building with ELDK4.2 for a number of ARM boards such as igep0030: cmd_mem.c: In function 'do_mem_mtest': cmd_mem.c:979: warning: passing argument 1 of 'unmap_sysmem' discards qualifiers from pointer target type cmd_mem.c:980: warning: passing argument 1 of 'unmap_sysmem' discards qualifiers from pointer target type Strange - there is even an explicit cast,. But mine is gcc 4.4.1 so may be a bit later. I could just remove those two lines since they are only there for semantic correctness and compile to nothing anyway. But I will track down that tool chain and see if I can work out a fix. OK I have repeated this - it seems that the compiler does not like a direct 'cast away' of volatile in a function argument. I have added a work-around, and sent out an updated patch 20. You can either pull this in from patchwork, or I have updated the pull information below. Rather ominously this might mean that I need to start building with multiple tool chains for each architecture. I was rather hoping to avoid that... Thanks for spotting it. Regards, Simon Please fix and re-submit, thanks. The following changes since commit a1eac57a2001ecf86a46f520cd85ef8e9c8b3687: common/env_nand.c: calculate crc only when readenv was OK (2013-02-22 19:59:53 -0600) are available in the git repository at: git://git.denx.de/u-boot-x86.git mem for you to fetch changes up to 218da0f35f4b5e5bf13d3dba6d975d4d5d65516f: hash: Use lower case for hash algorithm names (2013-02-28 19:49:13 -0800) Allen Martin (1): sandbox: fix compiler warning Simon Glass (21): Tidy up error checking and fix bug in hash command Update print_buffer() to use const sandbox: Add un/map_sysmen() to deal with sandbox's ram_buf sandbox: Change memory commands to use map_physmem Split out the memory tests into separate functions Use common mtest iteration counting Fix mtest indenting Bring mtest putc() into common code Reduce casting in mtest Update set_working_fdt_addr() to use setenv_addr() common: Use new numeric setenv functions fs: Use new numeric setenv functions net: Use new numeric setenv functions image: Use crc header file instead of C prototypes hash: Add a flag to support saving hashes in the environment Roll crc32 into hash infrastructure sandbox: config: Enable hash functions and mtest Move CONFIG_SYS_MEMTEST_SCRATCH #ifdef to top of file sandbox: Update mtest to fix crashes sandbox: Allow hash functions to work correctly hash: Use lower case for hash algorithm names Taylor Hutt (1): sandbox: Improve sandbox serial port keyboard interface README| 9 + arch/sandbox/config.mk| 1 + arch/sandbox/cpu/os.c | 8 + arch/sandbox/cpu/start.c | 3 + arch/sandbox/include/asm/io.h | 10 + common/cmd_bootm.c| 11 +- common/cmd_cbfs.c | 4 +- common/cmd_cramfs.c | 4 +- common/cmd_fdos.c | 4 +- common/cmd_fdt.c | 11 +- common/cmd_hash.c | 14 +- common/cmd_jffs2.c| 4 +- common/cmd_load.c | 12 +- common/cmd_mem.c | 809 common/cmd_mtdparts.c | 4 +- common/cmd_nand.c | 12 +- common/cmd_nvedit.c | 11 +- common/cmd_reiser.c | 4 +- common/cmd_setexpr.c | 39 +++- common/cmd_sha1sum.c | 6 +- common/cmd_unzip.c| 4 +- common/cmd_ximg.c | 7 +- common/cmd_zfs.c | 3 +- common/cmd_zip.c | 4 +- common/hash.c | 194 +++- common/image.c| 4 +- drivers/net/fm/fm.c | 4 +- drivers/serial/sandbox.c | 44 +++- fs/fs.c | 4 +- fs/ubifs/ubifs.c | 4 +- include/common.h | 29 ++- include/configs/sandbox.h | 9 +- include/hash.h| 13 +- include/os.h | 10 + include/u-boot/crc.h | 11 + lib/crc32.c | 9 + lib/display_options.c | 3 +- net/net.c | 8 +- 38 files changed, 761 insertions(+), 583 deletions(-) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
Hi Tom, I have pulled the latest series into a branch in the x86 tree. You can also get it from patchwork. If you are happy with it, please see below. I haven't seen any comments for a few days. The following changes since commit 47104c37de076e2be35ae1b3d144614f4d24a766: MAKEALL: add support for per architecture toolchains (2013-02-20 09:40:34 -0500) are available in the git repository at: git://git.denx.de/u-boot-x86.git mem for you to fetch changes up to dc63c7ccecee7b22fdc06f2c9d62d53bd5511b00: hash: Use lower case for hash algorithm names (2013-02-27 13:13:16 -0800) Allen Martin (1): sandbox: fix compiler warning Simon Glass (21): Tidy up error checking and fix bug in hash command Update print_buffer() to use const sandbox: Add un/map_sysmen() to deal with sandbox's ram_buf sandbox: Change memory commands to use map_physmem Split out the memory tests into separate functions Use common mtest iteration counting Fix mtest indenting Bring mtest putc() into common code Reduce casting in mtest Update set_working_fdt_addr() to use setenv_addr() common: Use new numeric setenv functions fs: Use new numeric setenv functions net: Use new numeric setenv functions image: Use crc header file instead of C prototypes hash: Add a flag to support saving hashes in the environment Roll crc32 into hash infrastructure sandbox: config: Enable hash functions and mtest Move CONFIG_SYS_MEMTEST_SCRATCH #ifdef to top of file sandbox: Update mtest to fix crashes sandbox: Allow hash functions to work correctly hash: Use lower case for hash algorithm names Taylor Hutt (1): sandbox: Improve sandbox serial port keyboard interface README| 9 + arch/sandbox/config.mk| 1 + arch/sandbox/cpu/os.c | 8 + arch/sandbox/cpu/start.c | 3 + arch/sandbox/include/asm/io.h | 10 + common/cmd_bootm.c| 11 +- common/cmd_cbfs.c | 4 +- common/cmd_cramfs.c | 4 +- common/cmd_fdos.c | 4 +- common/cmd_fdt.c | 11 +- common/cmd_hash.c | 14 +- common/cmd_jffs2.c| 4 +- common/cmd_load.c | 12 +- common/cmd_mem.c | 798 +- common/cmd_mtdparts.c | 4 +- common/cmd_nand.c | 12 +- common/cmd_nvedit.c | 11 +- common/cmd_reiser.c | 4 +- common/cmd_setexpr.c | 39 ++- common/cmd_sha1sum.c | 6 +- common/cmd_unzip.c| 4 +- common/cmd_ximg.c | 7 +- common/cmd_zfs.c | 3 +- common/cmd_zip.c | 4 +- common/hash.c | 194 +++--- common/image.c| 4 +- drivers/net/fm/fm.c | 4 +- drivers/serial/sandbox.c | 44 ++- fs/fs.c | 4 +- fs/ubifs/ubifs.c | 4 +- include/common.h | 29 +- include/configs/sandbox.h | 9 +- include/hash.h| 13 +- include/os.h | 10 + include/u-boot/crc.h | 11 + lib/crc32.c | 9 + lib/display_options.c | 3 +- net/net.c | 8 +- 38 files changed, 750 insertions(+), 583 deletions(-) Regards, Simon On Mon, Feb 18, 2013 at 9:22 PM, Simon Glass s...@chromium.org wrote: Hi Tom, On Mon, Feb 18, 2013 at 2:52 PM, Tom Rini tr...@ti.com wrote: On Sun, Feb 17, 2013 at 01:32:58PM -0800, Simon Glass wrote: Hi Wolfgang, On Sun, Feb 17, 2013 at 12:58 PM, Wolfgang Denk w...@denx.de wrote: Dear Simon Glass, In message capnjgz2p6sbdxiwxw2tecdjadmhkn5inbgrpzbtvwmqutyv...@mail.gmail.com you wrote: Hi Tom, This series includes the sandbox map_sysmem() feature, and gets the memory and hashing functions running on sandbox to allow testing/code coverage. I have run it through buildman and it seems clean, with the proviso that I don't have fully-working toolchains for all architectures. NAK. It is not correct to push changes that affect global code through a arch-specific custodian tree, especially if the submitter of the patche(es) is identical to the custodian of the very tree, and even more so if there have been not ANY independent Acked-by: or at least Tested-by: messages. This is NOT how the peer review process is supposed to work!! Especially as a custodian you must not do such things. OK, I was not quite sure what to do, so may have misunderstood Tom's instructions - there is a short thread here http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/153342 I have created a patchwork bundle instead. http://patchwork.ozlabs.org/bundle/sjg/sandbox-mem/ OK, I thought I said, but maybe I didn't, I'm OK with re-using the tree, but _not_
Re: [U-Boot] Please pull u-boot-x86.git
On Sun, Feb 17, 2013 at 01:32:58PM -0800, Simon Glass wrote: Hi Wolfgang, On Sun, Feb 17, 2013 at 12:58 PM, Wolfgang Denk w...@denx.de wrote: Dear Simon Glass, In message capnjgz2p6sbdxiwxw2tecdjadmhkn5inbgrpzbtvwmqutyv...@mail.gmail.com you wrote: Hi Tom, This series includes the sandbox map_sysmem() feature, and gets the memory and hashing functions running on sandbox to allow testing/code coverage. I have run it through buildman and it seems clean, with the proviso that I don't have fully-working toolchains for all architectures. NAK. It is not correct to push changes that affect global code through a arch-specific custodian tree, especially if the submitter of the patche(es) is identical to the custodian of the very tree, and even more so if there have been not ANY independent Acked-by: or at least Tested-by: messages. This is NOT how the peer review process is supposed to work!! Especially as a custodian you must not do such things. OK, I was not quite sure what to do, so may have misunderstood Tom's instructions - there is a short thread here http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/153342 I have created a patchwork bundle instead. http://patchwork.ozlabs.org/bundle/sjg/sandbox-mem/ OK, I thought I said, but maybe I didn't, I'm OK with re-using the tree, but _not_ the master branch, u-boot-x86/sandbox would have been fine. -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
On Mon, Feb 18, 2013 at 7:52 PM, Tom Rini tr...@ti.com wrote: OK, I thought I said, but maybe I didn't, I'm OK with re-using the tree, but _not_ the master branch, u-boot-x86/sandbox would have been fine. Personally I'd prefer another tree as done for other custodians. It makes life of new developers easier. -- Otavio Salvador O.S. Systems E-mail: ota...@ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Please pull u-boot-x86.git
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 02/18/2013 06:30 PM, Otavio Salvador wrote: On Mon, Feb 18, 2013 at 7:52 PM, Tom Rini tr...@ti.com wrote: OK, I thought I said, but maybe I didn't, I'm OK with re-using the tree, but _not_ the master branch, u-boot-x86/sandbox would have been fine. Personally I'd prefer another tree as done for other custodians. It makes life of new developers easier. It doesn't scale, however. If I had my wish and we were starting this afresh, I'd go with user repositories rather than subject repositories. Using Simon as the example, I don't think he needs one for sandbox, one for patman (and other tools) and one for x86. I'd rather pull .../sjc/for-trini/x86-whatever-vs-something. - -- Tom -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRIr00AAoJENk4IS6UOR1W5BsP/0XxGgvNqvp/Od5k1JnrR9EW mqf6xRV7IZ6MXwPBAK7/WBaAerEZ79vx2KSezQxejkxzJlTYVgiltJHf9GNCM3xh aenk/RGsyjjPmvZXTY/kR79x3/tMMdEu3xHaLb9F2a62qWfOAjQAcjqWtfwN1mSP TOgnEenxYovihC8hqQA+Qo6PjRwTQJStGapUCwxWinXAD1CWxcp3QdlHr8I2T6Ib TYIBSzT5iM/9LSdexh0Z8HOqQ0Mdu91znbJZCROkSWN5E9PM/oRaiXoWfSF6zWZy mjhmI9V+Egl9SOhJU3XL6Q2Zjs98jsnQMIELczHrHFxidWjbdopYD5GOEfx59A+z R8zZc59TSe1ocWdoJOkToy33iiXhWSUJR3ig6fmofVV7IXF/i9yO07GrlpW+CUip GVxAUaZdSgPfNtIKXQ10zwzO3VGRgxk2eLs5zb+cMR/wc/gy8cqQY9J9GJwF/k7t cysCzTW+iaSBaXwYSgVIscO7e7B9x+rt7Py+1MkkYegVE5N5Z2Igh8J5Z/tHe1Fi A+GuvkcX9aytvSiBtKjqBbe0pSc10h1EfsmAfhH1F/Go94RA+58cPMNPmzN9KkBj 6+TahbMkzk5vsHcLosio6Oj0ZNS0Xo6w/XAZGyhep0gl61YSZNwUGx5pBbcQ6OPi 2I6hs4o9GUZV2id6IZU9 =dJRp -END PGP SIGNATURE- ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot