Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Dear Mike Frysinger, On 10.09.2012 09:14, Bo Shen wrote: Hi Mike Frysinger, On 9/5/2012 9:54, Bo Shen wrote: Hi Mike Frysinger, On 9/1/2012 21:17, Andreas Bießmann wrote: Dear Mike Frysinger, On 14.08.2012 17:47, Mike Frysinger wrote: The following changes since commit 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127: zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf for you to fetch changes up to 4a4cb4e11149158c9eabb1537a1eaee7372ce491: sf: spansion: Add support for S25FL256S (2012-08-14 11:45:50 -0400) Marek Vasut (1): cmd_spi: remove superfluous semicolon Michal Simek (2): sf: stmicro: add support for N25Q128A sf: spansion: Add support for S25FL256S Rajeshwari Shinde (1): sf: winbond: add W25Q32 Stephan Linz (2): sf: stmicro: support JEDEC standard two-byte signature sf: stmicro: add support N25Q128 parts Stephen Warren (1): sf: winbond: fix page_size how about http://patchwork.ozlabs.org/patch/177896/ and http://patchwork.ozlabs.org/patch/178691/ I think they are required for new at91sam9x5 board support for serial flash booting. These two patches are needed for supporting new at91sam9x5 board with serial flash booting. Would these patches can be merged? Or else, the at91sam9x5 serial flash can not work. Btw, in e-mail, I see you merged: spi: add atmel at25df321 serial flash support (http://patchwork.ozlabs.org/patch/177896/) but I don't find it on your git tree. Ping. Any update here? Is it Ok for you that I pick those two patches and push them through u-boot-atmel for this upcoming release? Best regards Andreas Bießmann ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Hi Mike Frysinger, On 9/5/2012 9:54, Bo Shen wrote: Hi Mike Frysinger, On 9/1/2012 21:17, Andreas Bießmann wrote: Dear Mike Frysinger, On 14.08.2012 17:47, Mike Frysinger wrote: The following changes since commit 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127: zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf for you to fetch changes up to 4a4cb4e11149158c9eabb1537a1eaee7372ce491: sf: spansion: Add support for S25FL256S (2012-08-14 11:45:50 -0400) Marek Vasut (1): cmd_spi: remove superfluous semicolon Michal Simek (2): sf: stmicro: add support for N25Q128A sf: spansion: Add support for S25FL256S Rajeshwari Shinde (1): sf: winbond: add W25Q32 Stephan Linz (2): sf: stmicro: support JEDEC standard two-byte signature sf: stmicro: add support N25Q128 parts Stephen Warren (1): sf: winbond: fix page_size how about http://patchwork.ozlabs.org/patch/177896/ and http://patchwork.ozlabs.org/patch/178691/ I think they are required for new at91sam9x5 board support for serial flash booting. These two patches are needed for supporting new at91sam9x5 board with serial flash booting. Would these patches can be merged? Or else, the at91sam9x5 serial flash can not work. Btw, in e-mail, I see you merged: spi: add atmel at25df321 serial flash support (http://patchwork.ozlabs.org/patch/177896/) but I don't find it on your git tree. Ping. Best regards Andreas Bießmann ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Hi Mike Frysinger, On 9/1/2012 21:17, Andreas Bießmann wrote: Dear Mike Frysinger, On 14.08.2012 17:47, Mike Frysinger wrote: The following changes since commit 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127: zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf for you to fetch changes up to 4a4cb4e11149158c9eabb1537a1eaee7372ce491: sf: spansion: Add support for S25FL256S (2012-08-14 11:45:50 -0400) Marek Vasut (1): cmd_spi: remove superfluous semicolon Michal Simek (2): sf: stmicro: add support for N25Q128A sf: spansion: Add support for S25FL256S Rajeshwari Shinde (1): sf: winbond: add W25Q32 Stephan Linz (2): sf: stmicro: support JEDEC standard two-byte signature sf: stmicro: add support N25Q128 parts Stephen Warren (1): sf: winbond: fix page_size how about http://patchwork.ozlabs.org/patch/177896/ and http://patchwork.ozlabs.org/patch/178691/ I think they are required for new at91sam9x5 board support for serial flash booting. These two patches are needed for supporting new at91sam9x5 board with serial flash booting. Would these patches can be merged? Or else, the at91sam9x5 serial flash can not work. Btw, in e-mail, I see you merged: spi: add atmel at25df321 serial flash support (http://patchwork.ozlabs.org/patch/177896/) but I don't find it on your git tree. Best regards Andreas Bießmann ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Dear Mike Frysinger, In message 1344959244-5077-1-git-send-email-vap...@gentoo.org you wrote: The following changes since commit 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127: zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf for you to fetch changes up to 4a4cb4e11149158c9eabb1537a1eaee7372ce491: sf: spansion: Add support for S25FL256S (2012-08-14 11:45:50 -0400) Marek Vasut (1): cmd_spi: remove superfluous semicolon Michal Simek (2): sf: stmicro: add support for N25Q128A sf: spansion: Add support for S25FL256S Rajeshwari Shinde (1): sf: winbond: add W25Q32 Stephan Linz (2): sf: stmicro: support JEDEC standard two-byte signature sf: stmicro: add support N25Q128 parts Stephen Warren (1): sf: winbond: fix page_size common/cmd_spi.c |2 +- drivers/mtd/spi/spansion.c |7 +++ drivers/mtd/spi/stmicro.c | 39 +++ drivers/mtd/spi/winbond.c |7 ++- 4 files changed, 41 insertions(+), 14 deletions(-) Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de If you're not part of the solution, you're part of the problem. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Dear Mike Frysinger, On 14.08.2012 17:47, Mike Frysinger wrote: The following changes since commit 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127: zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf for you to fetch changes up to 4a4cb4e11149158c9eabb1537a1eaee7372ce491: sf: spansion: Add support for S25FL256S (2012-08-14 11:45:50 -0400) Marek Vasut (1): cmd_spi: remove superfluous semicolon Michal Simek (2): sf: stmicro: add support for N25Q128A sf: spansion: Add support for S25FL256S Rajeshwari Shinde (1): sf: winbond: add W25Q32 Stephan Linz (2): sf: stmicro: support JEDEC standard two-byte signature sf: stmicro: add support N25Q128 parts Stephen Warren (1): sf: winbond: fix page_size how about http://patchwork.ozlabs.org/patch/177896/ and http://patchwork.ozlabs.org/patch/178691/ I think they are required for new at91sam9x5 board support for serial flash booting. Best regards Andreas Bießmann ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Pull request u-boot-blackfin.git (sf branch)
The following changes since commit 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127: zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf for you to fetch changes up to 4a4cb4e11149158c9eabb1537a1eaee7372ce491: sf: spansion: Add support for S25FL256S (2012-08-14 11:45:50 -0400) Marek Vasut (1): cmd_spi: remove superfluous semicolon Michal Simek (2): sf: stmicro: add support for N25Q128A sf: spansion: Add support for S25FL256S Rajeshwari Shinde (1): sf: winbond: add W25Q32 Stephan Linz (2): sf: stmicro: support JEDEC standard two-byte signature sf: stmicro: add support N25Q128 parts Stephen Warren (1): sf: winbond: fix page_size common/cmd_spi.c |2 +- drivers/mtd/spi/spansion.c |7 +++ drivers/mtd/spi/stmicro.c | 39 +++ drivers/mtd/spi/winbond.c |7 ++- 4 files changed, 41 insertions(+), 14 deletions(-) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Pull request u-boot-blackfin.git (sf branch)
The following changes since commit b98b611502f5e0a85a1f8e15cf46c470cb105614: Merge branch 'next' of git://git.denx.de/u-boot (2012-07-30 20:39:52 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf for you to fetch changes up to b54d1f26ff216ef08307b7652647cc92124c2be1: sf: stmicro: add geometrical info for N25Q256 from Micron (2012-04-08 10:55:55 +) Gerlando Falauto (1): cmd_sf: add size checking to spi flash commands Jérôme Carretero (1): sf: stmicro: add geometrical info for N25Q256 from Micron Mike Frysinger (5): sf: inline data constants sf: unify erase commands sf: eon: drop duplicate id sf: sst: inline duplicate write enable helper funcs sf: unify status register writing (and thus block unlocking) common/cmd_sf.c | 14 ++ drivers/mtd/spi/eon.c| 35 ++- drivers/mtd/spi/macronix.c | 82 ++ drivers/mtd/spi/spansion.c | 24 ++ drivers/mtd/spi/spi_flash.c | 35 +-- drivers/mtd/spi/spi_flash_internal.h | 10 - drivers/mtd/spi/sst.c| 66 +++ drivers/mtd/spi/stmicro.c| 28 drivers/mtd/spi/winbond.c| 55 ++- 9 files changed, 85 insertions(+), 264 deletions(-) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Dear Mike Frysinger, In message 1343746406-27916-1-git-send-email-vap...@gentoo.org you wrote: The following changes since commit b98b611502f5e0a85a1f8e15cf46c470cb105614: Merge branch 'next' of git://git.denx.de/u-boot (2012-07-30 20:39:52 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf for you to fetch changes up to b54d1f26ff216ef08307b7652647cc92124c2be1: sf: stmicro: add geometrical info for N25Q256 from Micron (2012-04-08 10:55:55 +) Gerlando Falauto (1): cmd_sf: add size checking to spi flash commands Jérôme Carretero (1): sf: stmicro: add geometrical info for N25Q256 from Micron Mike Frysinger (5): sf: inline data constants sf: unify erase commands sf: eon: drop duplicate id sf: sst: inline duplicate write enable helper funcs sf: unify status register writing (and thus block unlocking) common/cmd_sf.c | 14 ++ drivers/mtd/spi/eon.c| 35 ++- drivers/mtd/spi/macronix.c | 82 ++ drivers/mtd/spi/spansion.c | 24 ++ drivers/mtd/spi/spi_flash.c | 35 +-- drivers/mtd/spi/spi_flash_internal.h | 10 - drivers/mtd/spi/sst.c| 66 +++ drivers/mtd/spi/stmicro.c| 28 drivers/mtd/spi/winbond.c| 55 ++- 9 files changed, 85 insertions(+), 264 deletions(-) Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Making files is easy under the UNIX operating system. Therefore, users tend to create numerous files using large amounts of file space. It has been said that the only standard thing about all UNIX systems is the message-of-the-day telling users to clean up their files.-- System V.2 administrator's guide ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Dear Mike Frysinger, In message 1342759406-23526-1-git-send-email-vap...@gentoo.org you wrote: The following changes since commit 66714b1a6df0a5a9f1656a6d4e6eea3c7ecdf7ae: Merge branch 'next' of git://git.denx.de/u-boot-video (2012-07-18 10:47:03 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf for you to fetch changes up to 7d72b80a903f64721c845cebaa1077a78aacb724: sf: spansion: inline useless id defines (2012-07-20 00:41:36 -0400) Mike Frysinger (2): sf: drop unused/duplicate command defines sf: spansion: inline useless id defines drivers/mtd/spi/eon.c|9 --- drivers/mtd/spi/macronix.c | 11 + drivers/mtd/spi/ramtron.c| 23 -- drivers/mtd/spi/spansion.c | 44 ++ drivers/mtd/spi/spi_flash_internal.h |2 +- drivers/mtd/spi/sst.c| 14 --- drivers/mtd/spi/stmicro.c|8 --- drivers/mtd/spi/winbond.c|9 --- 8 files changed, 23 insertions(+), 97 deletions(-) Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Chapter 1 -- The story so far: In the beginning the Universe was created. This has made a lot of people very angry and been widely regarded as a bad move. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Pull request u-boot-blackfin.git (sf branch)
The following changes since commit 66714b1a6df0a5a9f1656a6d4e6eea3c7ecdf7ae: Merge branch 'next' of git://git.denx.de/u-boot-video (2012-07-18 10:47:03 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf for you to fetch changes up to 7d72b80a903f64721c845cebaa1077a78aacb724: sf: spansion: inline useless id defines (2012-07-20 00:41:36 -0400) Mike Frysinger (2): sf: drop unused/duplicate command defines sf: spansion: inline useless id defines drivers/mtd/spi/eon.c|9 --- drivers/mtd/spi/macronix.c | 11 + drivers/mtd/spi/ramtron.c| 23 -- drivers/mtd/spi/spansion.c | 44 ++ drivers/mtd/spi/spi_flash_internal.h |2 +- drivers/mtd/spi/sst.c| 14 --- drivers/mtd/spi/stmicro.c|8 --- drivers/mtd/spi/winbond.c|9 --- 8 files changed, 23 insertions(+), 97 deletions(-) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Dear Mike Frysinger, In message 1329078559-32668-1-git-send-email-vap...@gentoo.org you wrote: The following changes since commit 9cbfee6dc200cc746394c7efc10253a24f3ce108: fw_env.h: fix comment (2012-02-11 22:18:38 +0100) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf Eric Nelson (2): sf command: allow default bus and chip selects README: Add description of SPI Flash (SF) command configuration Mike Frysinger (2): sf: eeprom_m95xxx: fix up style sf: eeprom_m95xxx: set a sane default timeout README | 20 common/cmd_sf.c | 37 + drivers/mtd/spi/eeprom_m95xxx.c | 28 3 files changed, 57 insertions(+), 28 deletions(-) Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de There is nothing new under the sun, but there are lots of old things we don't know yet. - Ambrose Bierce ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Pull request u-boot-blackfin.git (sf branch)
The following changes since commit 9cbfee6dc200cc746394c7efc10253a24f3ce108: fw_env.h: fix comment (2012-02-11 22:18:38 +0100) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf Eric Nelson (2): sf command: allow default bus and chip selects README: Add description of SPI Flash (SF) command configuration Mike Frysinger (2): sf: eeprom_m95xxx: fix up style sf: eeprom_m95xxx: set a sane default timeout README | 20 common/cmd_sf.c | 37 + drivers/mtd/spi/eeprom_m95xxx.c | 28 3 files changed, 57 insertions(+), 28 deletions(-) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Dear Mike Frysinger, In message 1317335305-24780-1-git-send-email-vap...@gentoo.org you wrote: The following changes since commit 1d5e7fb403257d62f0f2419cb83fdf6b0f02f215: Prepare v2011.09 (2011-09-29 21:11:15 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf All have been posted to the list already. Shaohui Xie (1): sf: eon: add support for EN25Q32B parts Simon Glass (1): cmd_sf: add update subcommand to do smart SPI flash update common/cmd_sf.c | 86 +++-- drivers/mtd/spi/eon.c |8 2 files changed, 91 insertions(+), 3 deletions(-) Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de You see but you do not observe. Sir Arthur Conan Doyle, in The Memoirs of Sherlock Holmes ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Pull request u-boot-blackfin.git (sf branch)
The following changes since commit 1d5e7fb403257d62f0f2419cb83fdf6b0f02f215: Prepare v2011.09 (2011-09-29 21:11:15 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf All have been posted to the list already. Shaohui Xie (1): sf: eon: add support for EN25Q32B parts Simon Glass (1): cmd_sf: add update subcommand to do smart SPI flash update common/cmd_sf.c | 86 +++-- drivers/mtd/spi/eon.c |8 2 files changed, 91 insertions(+), 3 deletions(-) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
On Fri, Jul 08, 2011 at 04:40:37PM -0400, Mike Frysinger wrote: On Friday, July 08, 2011 04:54:09 Simon Guinot wrote: On Thu, Jun 30, 2011 at 11:35:55AM -0400, Mike Frysinger wrote: On Wed, Jun 29, 2011 at 17:16, Wolfgang Denk wrote: Mike Frysinger wrote: The following changes since commit b1af6f532e0d348b153d5c148369229d24af361a: Prepare v2011.06 (2011-06-27 22:22:42 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf These patches (as is) were just posted a few hours ago. You are supposed to allow for a couple of days for reeview before sending a pull request. all the patches in this series are unchanged from the ones posted months ago (except for one that i noted, but that was a minor rebase) Then, what is the status for this SF patches ? How to get them merged with mainline ? Wolfgang wont take my pull requests for these, so i'll have to wait for him to pick them one by one out of patchwork. you could try taking them out of patchwork and send Wolfgang a pull request. maybe he'll accept it from you. here's the order: http://patchwork.ozlabs.org/patch/103939/ http://patchwork.ozlabs.org/patch/103936/ http://patchwork.ozlabs.org/patch/92646/ http://patchwork.ozlabs.org/patch/92760/ http://patchwork.ozlabs.org/patch/103938/ http://patchwork.ozlabs.org/patch/92643/ http://patchwork.ozlabs.org/patch/92761/ http://patchwork.ozlabs.org/patch/92762/ http://patchwork.ozlabs.org/patch/103937/ I have tried but I suspect Wolfgang will not accept a such pull request. Wolfgang, this patches are needed and there is no point to drop them down like this. Could you please explain how to get them mainlined ? Thanks in advance. Simon signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Dear Simon Guinot, In message 20110713103646.gb16...@kw.sim.vm.gnt you wrote: Wolfgang, this patches are needed and there is no point to drop them down like this. Could you please explain how to get them mainlined ? Sorry, but this is not at the top of my priority list at the moment. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de ...and the fully armed nuclear warheads, are, of course, merely a courtesy detail. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Hi Mike and Wolfgang, On Thu, Jun 30, 2011 at 11:35:55AM -0400, Mike Frysinger wrote: On Wed, Jun 29, 2011 at 17:16, Wolfgang Denk wrote: Mike Frysinger wrote: The following changes since commit b1af6f532e0d348b153d5c148369229d24af361a: Prepare v2011.06 (2011-06-27 22:22:42 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf These patches (as is) were just posted a few hours ago. You are supposed to allow for a couple of days for reeview before sending a pull request. all the patches in this series are unchanged from the ones posted months ago (except for one that i noted, but that was a minor rebase) Then, what is the status for this SF patches ? How to get them merged with mainline ? Regards, Simon signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
On Friday, July 08, 2011 04:54:09 Simon Guinot wrote: On Thu, Jun 30, 2011 at 11:35:55AM -0400, Mike Frysinger wrote: On Wed, Jun 29, 2011 at 17:16, Wolfgang Denk wrote: Mike Frysinger wrote: The following changes since commit b1af6f532e0d348b153d5c148369229d24af361a: Prepare v2011.06 (2011-06-27 22:22:42 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf These patches (as is) were just posted a few hours ago. You are supposed to allow for a couple of days for reeview before sending a pull request. all the patches in this series are unchanged from the ones posted months ago (except for one that i noted, but that was a minor rebase) Then, what is the status for this SF patches ? How to get them merged with mainline ? Wolfgang wont take my pull requests for these, so i'll have to wait for him to pick them one by one out of patchwork. you could try taking them out of patchwork and send Wolfgang a pull request. maybe he'll accept it from you. here's the order: http://patchwork.ozlabs.org/patch/103939/ http://patchwork.ozlabs.org/patch/103936/ http://patchwork.ozlabs.org/patch/92646/ http://patchwork.ozlabs.org/patch/92760/ http://patchwork.ozlabs.org/patch/103938/ http://patchwork.ozlabs.org/patch/92643/ http://patchwork.ozlabs.org/patch/92761/ http://patchwork.ozlabs.org/patch/92762/ http://patchwork.ozlabs.org/patch/103937/ -mike signature.asc Description: This is a digitally signed message part. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
On Wed, Jun 29, 2011 at 17:16, Wolfgang Denk wrote: Mike Frysinger wrote: The following changes since commit b1af6f532e0d348b153d5c148369229d24af361a: Prepare v2011.06 (2011-06-27 22:22:42 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf These patches (as is) were just posted a few hours ago. You are supposed to allow for a couple of days for reeview before sending a pull request. all the patches in this series are unchanged from the ones posted months ago (except for one that i noted, but that was a minor rebase) -mike ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Dear Mike Frysinger, In message 1309282783-27244-1-git-send-email-vap...@gentoo.org you wrote: The following changes since commit b1af6f532e0d348b153d5c148369229d24af361a: Prepare v2011.06 (2011-06-27 22:22:42 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf These patches (as is) were just posted a few hours ago. You are supposed to allow for a couple of days for reeview before sending a pull request. Ignored. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de You can only live once, but if you do it right, once is enough. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Pull request u-boot-blackfin.git (sf branch)
The following changes since commit b1af6f532e0d348b153d5c148369229d24af361a: Prepare v2011.06 (2011-06-27 22:22:42 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf Macpaul Lin (1): sf: macronix: add MX25L4005 and MX25L8005 Mike Frysinger (6): sf: unify write enable commands sf: unify write funcs sf: kill off now-unused local state sf: eon/stmicro: inline useless ID defines sf: unify write disable commands sf: sst: support newer standardized flashes Shaohui Xie (1): sf: spansion: add support for S25FL129P_64K Simon Guinot (1): sf: macronix: disable write protection when initializing drivers/mtd/spi/eon.c| 102 drivers/mtd/spi/macronix.c | 126 +++--- drivers/mtd/spi/ramtron.c|2 +- drivers/mtd/spi/spansion.c | 107 ++--- drivers/mtd/spi/spi_flash.c | 59 - drivers/mtd/spi/spi_flash_internal.h | 25 +++ drivers/mtd/spi/sst.c| 26 ++- drivers/mtd/spi/stmicro.c| 124 ++ drivers/mtd/spi/winbond.c| 104 include/spi_flash.h |5 +- 10 files changed, 232 insertions(+), 448 deletions(-) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Pull request u-boot-blackfin.git (sf branch)
The following changes since commit b16aadf411280fc426d7488ddd8a5b2038b7194d: disk/part.c: fix potential stack overflow bug (2011-04-12 22:58:35 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf James Kosin (1): sf: sst: add support for SST25VF064C Mike Frysinger (7): sf: punt unused spi_flash_region struct sf: atmel: undo unification of status polling sf: sst: setup read func sf: localize erase funcs sf: use print_size() for sector_size output cmd_sf: drop device status message when probing cmd_sf: use cmd_usage() in more places Richard Retanubun (2): sf: add struct spi_flash.sector_size parameter cmd_sf: add handler for +len arg for erase command common/cmd_sf.c | 111 +++--- drivers/mtd/spi/atmel.c | 40 ++--- drivers/mtd/spi/eon.c| 13 +--- drivers/mtd/spi/macronix.c | 17 ++ drivers/mtd/spi/ramtron.c|5 +- drivers/mtd/spi/spansion.c | 15 + drivers/mtd/spi/spi_flash.c |9 ++- drivers/mtd/spi/spi_flash_internal.h |2 +- drivers/mtd/spi/sst.c| 17 +++--- drivers/mtd/spi/stmicro.c| 15 + drivers/mtd/spi/winbond.c| 13 +--- include/spi_flash.h |7 +-- 12 files changed, 148 insertions(+), 116 deletions(-) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Dear Mike Frysinger, In message 1302723612-22844-1-git-send-email-vap...@gentoo.org you wrote: The following changes since commit b16aadf411280fc426d7488ddd8a5b2038b7194d: disk/part.c: fix potential stack overflow bug (2011-04-12 22:58:35 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf James Kosin (1): sf: sst: add support for SST25VF064C Mike Frysinger (7): sf: punt unused spi_flash_region struct sf: atmel: undo unification of status polling sf: sst: setup read func sf: localize erase funcs sf: use print_size() for sector_size output cmd_sf: drop device status message when probing cmd_sf: use cmd_usage() in more places Richard Retanubun (2): sf: add struct spi_flash.sector_size parameter cmd_sf: add handler for +len arg for erase command common/cmd_sf.c | 111 +++--- drivers/mtd/spi/atmel.c | 40 ++--- drivers/mtd/spi/eon.c| 13 +--- drivers/mtd/spi/macronix.c | 17 ++ drivers/mtd/spi/ramtron.c|5 +- drivers/mtd/spi/spansion.c | 15 + drivers/mtd/spi/spi_flash.c |9 ++- drivers/mtd/spi/spi_flash_internal.h |2 +- drivers/mtd/spi/sst.c| 17 +++--- drivers/mtd/spi/stmicro.c| 15 + drivers/mtd/spi/winbond.c| 13 +--- include/spi_flash.h |7 +-- 12 files changed, 148 insertions(+), 116 deletions(-) Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Men don't talk peace unless they're ready to back it up with war. -- Col. Green, The Savage Curtain, stardate 5906.4 ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Dear Mike Frysinger, In message 1289381218-17985-1-git-send-email-vap...@gentoo.org you wrote: The following changes since commit 0c0892be0d93a5a892b93739c5eb3bf692fed4ff: Merge branch 'master' of git://git.denx.de/u-boot-marvell (2010-10-29 22:03:00 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf Reinhard Meyer (1): sf: ramtron: new spi fram driver drivers/mtd/spi/Makefile |1 + drivers/mtd/spi/ramtron.c| 319 ++ drivers/mtd/spi/spi_flash.c |8 + drivers/mtd/spi/spi_flash_internal.h |1 + 4 files changed, 329 insertions(+), 0 deletions(-) create mode 100644 drivers/mtd/spi/ramtron.c Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Dear Lord: I just want *one* one-armed manager so I never have to hear On the other hand, again. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Pull request u-boot-blackfin.git (sf branch)
The following changes since commit 0c0892be0d93a5a892b93739c5eb3bf692fed4ff: Merge branch 'master' of git://git.denx.de/u-boot-marvell (2010-10-29 22:03:00 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf Reinhard Meyer (1): sf: ramtron: new spi fram driver drivers/mtd/spi/Makefile |1 + drivers/mtd/spi/ramtron.c| 319 ++ drivers/mtd/spi/spi_flash.c |8 + drivers/mtd/spi/spi_flash_internal.h |1 + 4 files changed, 329 insertions(+), 0 deletions(-) create mode 100644 drivers/mtd/spi/ramtron.c ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Pull request u-boot-blackfin.git (sf branch)
The following changes since commit 076f1be8e1c1a1ea4760fc4ac7cac68bc28fc80d: TSI148: Fix argument parsing (2010-10-12 23:31:10 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf Reinhard Meyer (1): sf: turn probe switch into a lookup table drivers/mtd/spi/spi_flash.c | 126 --- 1 files changed, 82 insertions(+), 44 deletions(-) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Dear Mike Frysinger, In message 1286977821-3681-1-git-send-email-vap...@gentoo.org you wrote: The following changes since commit 076f1be8e1c1a1ea4760fc4ac7cac68bc28fc80d: TSI148: Fix argument parsing (2010-10-12 23:31:10 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf Reinhard Meyer (1): sf: turn probe switch into a lookup table drivers/mtd/spi/spi_flash.c | 126 --- 1 files changed, 82 insertions(+), 44 deletions(-) Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Program maintenance is an entropy-increasing process, and even its most skilfull execution only delays the subsidence of the system into unfixable obsolescence. - Fred Brooks, The Mythical Man Month ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Dear Mike Frysinger, In message 1277956310-2850-1-git-send-email-vap...@gentoo.org you wrote: The following changes since commit 39ddd10b046fb791f47281ffb2100be01909ad72: Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master (2010-06-30 10:10:32 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf Mike Frysinger (1): sf: move useful messages from debug to printf Thomas Chou (1): spi_flash: support old STMicro parts with RES Wolfgang Wegner (1): add redundant environment for env_sf.c common/env_sf.c | 232 +++ drivers/mtd/spi/atmel.c |7 +- drivers/mtd/spi/macronix.c |5 +- drivers/mtd/spi/spansion.c |5 +- drivers/mtd/spi/spi_flash.c |5 +- drivers/mtd/spi/sst.c |5 +- drivers/mtd/spi/stmicro.c | 26 +- drivers/mtd/spi/winbond.c |7 +- 8 files changed, 276 insertions(+), 16 deletions(-) Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de There's only one kind of woman ... Or man, for that matter. You either believe in yourself or you don't. -- Kirk and Harry Mudd, Mudd's Women, stardate 1330.1 ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Pull request u-boot-blackfin.git (sf branch)
The following changes since commit 39ddd10b046fb791f47281ffb2100be01909ad72: Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master (2010-06-30 10:10:32 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git sf Mike Frysinger (1): sf: move useful messages from debug to printf Thomas Chou (1): spi_flash: support old STMicro parts with RES Wolfgang Wegner (1): add redundant environment for env_sf.c common/env_sf.c | 232 +++ drivers/mtd/spi/atmel.c |7 +- drivers/mtd/spi/macronix.c |5 +- drivers/mtd/spi/spansion.c |5 +- drivers/mtd/spi/spi_flash.c |5 +- drivers/mtd/spi/sst.c |5 +- drivers/mtd/spi/stmicro.c | 26 +- drivers/mtd/spi/winbond.c |7 +- 8 files changed, 276 insertions(+), 16 deletions(-) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
