Re: [U-Boot] U-boot and AT91SAM9263-EK
Hello Alexander, i made a mistake in configuration (i did'n run mkconfig), uBoot 2010-06 works correctly. Sorry for the confusion. Best regards Radiovan Vapenik Původní zpráva Od: Alexander Stein alexander.st...@systec-electronic.com Předmět: Re: [U-Boot] U-boot and AT91SAM9263-EK Datum: 14.7.2010 17:57:41 Hello, Am Mittwoch, 14. Juli 2010, 17:05:47 schrieb Radovan Vápeník: i have compiled new u-boot (2010-06) for at91sam9263-ek and I have problem with access and save environment variables to NAND Flash. When I set any environment variable and save it to Nand (saveenv), uBoot shows me Saving Environment to NAND... and after it shows the command prompt. The saved variable is not set after reset. The last version, where saving works correctly, is uBoot-2009-11. The variable CONFIG_SYS_USE_NANDFLASH is set in config.h, so variables should be saved to NandFlash. What has been changed in the new uBoot / what i am doing wrong? Last time I build u-boot for 9263-ek was also 2009.11. You may want to git bisect into this problem to find the commit where the problem starts. But don't forget to distclean before. Best regards, Alexander ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] U-boot and AT91SAM9263-EK
Hello, i have compiled new u-boot (2010-06) for at91sam9263-ek and I have problem with access and save environment variables to NAND Flash. When I set any environment variable and save it to Nand (saveenv), uBoot shows me Saving Environment to NAND... and after it shows the command prompt. The saved variable is not set after reset. The last version, where saving works correctly, is uBoot-2009-11. The variable CONFIG_SYS_USE_NANDFLASH is set in config.h, so variables should be saved to NandFlash. What has been changed in the new uBoot / what i am doing wrong? Best Regards Radovan Vapenik ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] U-boot and AT91SAM9263-EK
Hello, Am Mittwoch, 14. Juli 2010, 17:05:47 schrieb Radovan Vápeník: i have compiled new u-boot (2010-06) for at91sam9263-ek and I have problem with access and save environment variables to NAND Flash. When I set any environment variable and save it to Nand (saveenv), uBoot shows me Saving Environment to NAND... and after it shows the command prompt. The saved variable is not set after reset. The last version, where saving works correctly, is uBoot-2009-11. The variable CONFIG_SYS_USE_NANDFLASH is set in config.h, so variables should be saved to NandFlash. What has been changed in the new uBoot / what i am doing wrong? Last time I build u-boot for 9263-ek was also 2009.11. You may want to git bisect into this problem to find the commit where the problem starts. But don't forget to distclean before. Best regards, Alexander ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] U-boot and AT91SAM9263-EK
Radovan Vápeník wrote: Hello, i have compiled new u-boot (2010-06) for at91sam9263-ek and I have problem with access and save environment variables to NAND Flash. When I set any environment variable and save it to Nand (saveenv), uBoot shows me Saving Environment to NAND... and after it shows the command prompt. The saved variable is not set after reset. The last version, where saving works correctly, is uBoot-2009-11. The variable CONFIG_SYS_USE_NANDFLASH is set in config.h, so variables should be saved to NandFlash. What has been changed in the new uBoot / what i am doing wrong? 2010.6 does functional NAND environment for the 9260/9xe-ek. So it should not be a general code problem. Reinhard ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot