Re: [U-Boot] building tools/env
On Tuesday 24 July 2012 11:23:03 Nickos wrote: > Had you find a solution to your problem. I have the same problem. this thread (and the source he was using) are ancient. please start a new thread describing *your* setup and the problems you're seeing. -mike signature.asc Description: This is a digitally signed message part. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] building tools/env
Had you find a solution to your problem. I have the same problem. Thanks, steverino2 wrote: > > > hi there, I'm attempting to build u-boot 1.1.1 tools/env > and the build is failed. Any ideas on best way to enable it in the > build. Here's what I did so far > > first, update tools/Makefile > > TOOLSUBDIRS = env > > then > > top level build > make clobber mrproper > make octeon_cn3010_evb_hs5_config > make all > > the build in tools/env fails due to missing include files > linux/mtd/mtd.h > zlib.h > > add to tools/env/Makefile > > CPPFLAGS += ../../include > > and include CPPFLAGS here: > > fw_printenv : $(SOURCES) $(HEADERS) > $(CROSS_COMPILE)gcc -Wall $(CPPFLAGS) -DUSE_HOSTCC $(SOURCES) -o > fw_printenv > > but this leads to build error on definitions of uint32_t, phys_addr_t > and erase_info_t > > Any ideas on preferred way to build tools/env? > > thanks in advance! > > > > > ___ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > > -- View this message in context: http://old.nabble.com/-U-Boot--building-tools-env-tp28669277p34205899.html Sent from the Uboot - Users mailing list archive at Nabble.com. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] building tools/env
Dear Steve DeLaney, In message <4bfbe07b.7020...@yahoo.com> you wrote: > > hi there, I'm attempting to build u-boot 1.1.1 tools/env > and the build is failed. Any ideas on best way to enable it in the > build. Here's what I did so far ... > make octeon_cn3010_evb_hs5_config U-Boot 1.1.1 is pehistoric - it is more than 6 years old. And Octeon is only supported in out-of-tree ports, the patches are not available to the community. Don't expect that anybody in the community is able to help you with that - please contact Cavium technical support and ask them what to do. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de C++ was an interesting and valuable experiment, but we've learned its lessons and it's time to move on. - Peter Curran in ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] building tools/env
hi there, I'm attempting to build u-boot 1.1.1 tools/env and the build is failed. Any ideas on best way to enable it in the build. Here's what I did so far first, update tools/Makefile TOOLSUBDIRS = env then top level build make clobber mrproper make octeon_cn3010_evb_hs5_config make all the build in tools/env fails due to missing include files linux/mtd/mtd.h zlib.h add to tools/env/Makefile CPPFLAGS += ../../include and include CPPFLAGS here: fw_printenv : $(SOURCES) $(HEADERS) $(CROSS_COMPILE)gcc -Wall $(CPPFLAGS) -DUSE_HOSTCC $(SOURCES) -o fw_printenv but this leads to build error on definitions of uint32_t, phys_addr_t and erase_info_t Any ideas on preferred way to build tools/env? thanks in advance! ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot