Re: [U-Boot] mkconfig arch link generation
Wolfgang Denk wrote: Dear Matteo Facchinetti, In message 4c3d83f3.1040...@sirius-es.it you wrote: I'm updating my uboot to mainline and I have a question about a link generate from mkconfig (with mpc5121_config). Which code are you talkign about? There is no target mpc5121_config supported in mainline... yes, I've started from mpc5121ads_config but mpc5121ads_rev2_config is the same. U-boot head mainline version. ( 54841ab50c20d6fa6c9cc3eb826989da3a22d934 ) In practice: $ make distclean $ ls -l include/asm/arch ls: cannot access include/asm/arch: No such file or directory $ make mpc5121ads_config Configuring for mpc5121ads board... $ ls -l include/asm/arch lrwxrwxrwx 1 teox teox 12 2010-07-15 09:02 include/asm/arch - arch-mpc512x Regards, Matteo Facchinetti ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] mkconfig arch link generation
Dear Matteo Facchinetti, In message 4c3eb5b4.1050...@sirius-es.it you wrote: Which code are you talkign about? There is no target mpc5121_config supported in mainline... yes, No. I've started from mpc5121ads_config but mpc5121ads_rev2_config is the same. U-boot head mainline version. ( 54841ab50c20d6fa6c9cc3eb826989da3a22d934 ) Note that there is a difference between mpc5121ads_config and mpc5121_config - please make sure to be precise in your statements. In practice: $ make distclean $ ls -l include/asm/arch ls: cannot access include/asm/arch: No such file or directory $ make mpc5121ads_config Configuring for mpc5121ads board... $ ls -l include/asm/arch lrwxrwxrwx 1 teox teox 12 2010-07-15 09:02 include/asm/arch - arch-mpc512x Yes, so what? This doesn't seem to hurt for any of the existing boards? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Artificial Intelligence is no match for natural stupidity. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] mkconfig arch link generation
Hi, I'm updating my uboot to mainline and I have a question about a link generate from mkconfig (with mpc5121_config). Follwing link in include/asm, I found a link named arch genarated by mkconfig. This is broken so point to arch-mpc512x instead of arch/powerpc/cpu/mpc512x. Result is #include asm/arch/asm-offsets.h or similar are be broken. How is the correct way to modify mkconfig? I don't understand mean of link points arch-mpc512x. Regards, Matteo Facchinetti ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] mkconfig arch link generation
Matteo Facchinetti wrote: Hi, Hi Matteo, I'm updating my uboot to mainline and I have a question about a link generate from mkconfig (with mpc5121_config). Follwing link in include/asm, I found a link named arch genarated by mkconfig. This is broken so point to arch-mpc512x instead of arch/powerpc/cpu/mpc512x. Yes, the link is broken. However, all boards in the mainline using the MPC512x are compiled clean. This is because asm-offsets.h is included only by arch/powerpc/cpu/mpc512x/start.S with #include asm-offsets.h, and the compiler search for the file in the same directory of start.S and can find it. The link is not required to compile the 512x boards supported currently by u-boot, but it must be set for the ARM architecture. Under the kernel, asm-offsets.h is auto-generated (I know, this is the best solution). However, why do you need this file ? It should be required only by low level initialization in assembly, as it is done by start.S. After that, it is required in u-boot to access to registers/peripherals via C structures and not using offsets. Result is #include asm/arch/asm-offsets.h or similar are be broken. How is the correct way to modify mkconfig? Probably not setting the link for powerpc, because it is not required. Regards, Stefano Babic -- = DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de = ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] mkconfig arch link generation
Stefano Babic wrote: Matteo Facchinetti wrote: Hi, Hi Matteo, Hi Stefano, I'm updating my uboot to mainline and I have a question about a link generate from mkconfig (with mpc5121_config). Follwing link in include/asm, I found a link named arch genarated by mkconfig. This is broken so point to arch-mpc512x instead of arch/powerpc/cpu/mpc512x. Yes, the link is broken. However, all boards in the mainline using the MPC512x are compiled clean. This is because asm-offsets.h is included only by arch/powerpc/cpu/mpc512x/start.S with #include asm-offsets.h, and the compiler search for the file in the same directory of start.S and can find it. The link is not required to compile the 512x boards supported currently by u-boot, but it must be set for the ARM architecture. Under the kernel, asm-offsets.h is auto-generated (I know, this is the best solution). However, why do you need this file ? It should be required only by low level initialization in assembly, as it is done by start.S. After that, it is required in u-boot to access to registers/peripherals via C structures and not using offsets. Yes, you're rigth, but I'm tring to write nand_spl driver for add nand boot support for my TWR-MPC5125 evaluation board. In first step I take what I need from LTIB (freescale) and then I adjust the code for uboot mainline. The part takes from LTIB of 2k first stage nandboot code uses directly SRAMBAR and SWCRR defines. Now, I suppose, correct develop is to use the common c code in nand_spl directory and eventually customizing for my board unless use include/asm/arch/... for powerpc arch. Is it true? Result is #include asm/arch/asm-offsets.h or similar are be broken. How is the correct way to modify mkconfig? Probably not setting the link for powerpc, because it is not required. Regards, Stefano Babic ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] mkconfig arch link generation
Dear Matteo Facchinetti, In message 4c3d83f3.1040...@sirius-es.it you wrote: I'm updating my uboot to mainline and I have a question about a link generate from mkconfig (with mpc5121_config). Which code are you talkign about? There is no target mpc5121_config supported in mainline... How is the correct way to modify mkconfig? I don't understand mean of link points arch-mpc512x. I think you must be doing something wrong. Please give the exact commit id you are referring to, and the exact commands you use. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de No, I'm not going to explain it. If you can't figure it out, you didn't want to know anyway... :-) - Larry Wall in 1991aug7.180856.2...@netlabs.com ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
