Re: [PATCH 0/5] net: mdio-uclass: probe generic Ethernet PHY driver & Fix Beagleplay Ethernet
On Mon, Mar 25, 2024 at 02:16:53PM +0200, Roger Quadros wrote: > Hi Tom / Joe, > > On 05/03/2024 15:24, Roger Quadros wrote: > > Currently, the GPIO Reset Device Tree properties of the > > PHY node are ignored when the PHY is probed via mdio-uclass driver [1]. > > > > To resolve this, for each child of the MDIO bus node, bind and probe > > the generic Ethernet PHY driver if CONFIG_DM_ETH_PHY is enabled. > > > > This should now show the generic_phy_driver in "dm tree" > > and also apply the GPIO reset before the MDIO bus driver scans the bus > > for the PHYs. > > > > ethernet 0 [ + ] am65_cpsw_nuss_port | |-- > > ethernet@800port@1 > > bootdev 3 [ ] eth_bootdev | | `-- > > port@1.bootdev > > mdio 0 [ + ] cpsw_mdio | `-- mdio@f00 > > eth_phy_ge0 [ + ] eth_phy_generic_drv | |-- > > ethernet-phy@0 > > eth_phy_ge1 [ + ] eth_phy_generic_drv | `-- > > ethernet-phy@1 > > > > To test this on Beagleplay, the following series is required > > > > [1] Switch am65-cpsw to DM MDIO > > > > https://lore.kernel.org/all/20240228-for-2024-07-am65-cpsw-mdio-v2-0-f74f972ea...@kernel.org/ > > > > The last 3 patches are marked [not-for-merge]. They are to show how the > > whole solution can work to fix Ethernet on Beagleplay, which has been broken > > so far. Those DT patches will be sent once the device tree changes are > > merged > > into Linux tree. > > > > Signed-off-by: Roger Quadros > > --- > > Roger Quadros (5): > > net: mdio-uclass: Bind and probe generic Ethernet PHY driver > > configs/am62x_beagleplay_a53_defconfig: enable DM_ETH_PHY > > Any comments to the first 2 patches in this series? Oh, so the CI failure, unfortunately, was because sometimes those tests hit some resource-related race condition I believe. And I took your comment at the time to mean you would v2 them. Yes, these patches seem fine as is and I'll pick up assorted changes for -next soon. Thanks for your patience. -- Tom signature.asc Description: PGP signature
Re: [PATCH 0/5] net: mdio-uclass: probe generic Ethernet PHY driver & Fix Beagleplay Ethernet
Hi Tom / Joe, On 05/03/2024 15:24, Roger Quadros wrote: > Currently, the GPIO Reset Device Tree properties of the > PHY node are ignored when the PHY is probed via mdio-uclass driver [1]. > > To resolve this, for each child of the MDIO bus node, bind and probe > the generic Ethernet PHY driver if CONFIG_DM_ETH_PHY is enabled. > > This should now show the generic_phy_driver in "dm tree" > and also apply the GPIO reset before the MDIO bus driver scans the bus > for the PHYs. > > ethernet 0 [ + ] am65_cpsw_nuss_port | |-- > ethernet@800port@1 > bootdev 3 [ ] eth_bootdev | | `-- port@1.bootdev > mdio 0 [ + ] cpsw_mdio | `-- mdio@f00 > eth_phy_ge0 [ + ] eth_phy_generic_drv | |-- ethernet-phy@0 > eth_phy_ge1 [ + ] eth_phy_generic_drv | `-- ethernet-phy@1 > > To test this on Beagleplay, the following series is required > > [1] Switch am65-cpsw to DM MDIO > > https://lore.kernel.org/all/20240228-for-2024-07-am65-cpsw-mdio-v2-0-f74f972ea...@kernel.org/ > > The last 3 patches are marked [not-for-merge]. They are to show how the > whole solution can work to fix Ethernet on Beagleplay, which has been broken > so far. Those DT patches will be sent once the device tree changes are merged > into Linux tree. > > Signed-off-by: Roger Quadros > --- > Roger Quadros (5): > net: mdio-uclass: Bind and probe generic Ethernet PHY driver > configs/am62x_beagleplay_a53_defconfig: enable DM_ETH_PHY Any comments to the first 2 patches in this series? > [not-for-merge] arm: dts: k3-am62*: sync with linux-next-20240229 > [not-for-merge] k3-am625-beagleplay-u-boot: get CPSW Ethernet to work > [not-for-merge] arm: dts: k3-am625-beagleplay: Fix Ethernet PHY reset > GPIO > > arch/arm/dts/k3-am62-main.dtsi | 126 ++--- > arch/arm/dts/k3-am62-mcu.dtsi| 4 +- > arch/arm/dts/k3-am62-phycore-som.dtsi| 5 +- > arch/arm/dts/k3-am62-thermal.dtsi| 5 +- > arch/arm/dts/k3-am62-verdin-dev.dtsi | 4 +- > arch/arm/dts/k3-am62-verdin-wifi.dtsi| 1 - > arch/arm/dts/k3-am62-verdin.dtsi | 76 +++--- > arch/arm/dts/k3-am62-wakeup.dtsi | 38 +++-- > arch/arm/dts/k3-am62.dtsi| 4 +- > arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 63 + > arch/arm/dts/k3-am625-beagleplay.dts | 66 - > arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts | 104 +- > arch/arm/dts/k3-am625-sk.dts | 4 +- > arch/arm/dts/k3-am625.dtsi | 4 +- > arch/arm/dts/k3-am62a-main.dtsi | 201 > +-- > arch/arm/dts/k3-am62a-mcu.dtsi | 4 +- > arch/arm/dts/k3-am62a-thermal.dtsi | 5 +- > arch/arm/dts/k3-am62a-wakeup.dtsi| 4 +- > arch/arm/dts/k3-am62a.dtsi | 4 +- > arch/arm/dts/k3-am62a7-sk.dts| 162 - > arch/arm/dts/k3-am62a7.dtsi | 4 +- > arch/arm/dts/k3-am62x-sk-common.dtsi | 24 +++- > configs/am62x_beagleplay_a53_defconfig | 2 +- > net/mdio-uclass.c| 41 ++ > 24 files changed, 825 insertions(+), 130 deletions(-) > --- > base-commit: 84f5bb0be0ec9fbf98f8f3317b578dfc114cf44e > change-id: 20240305-for-2024-07-beagleplay-eth-f82a51197937 > > Best regards, -- cheers, -roger
Re: [PATCH 0/5] net: mdio-uclass: probe generic Ethernet PHY driver & Fix Beagleplay Ethernet
On 08/03/2024 10:22, Roger Quadros wrote: > > > On 05/03/2024 15:24, Roger Quadros wrote: >> Currently, the GPIO Reset Device Tree properties of the >> PHY node are ignored when the PHY is probed via mdio-uclass driver [1]. >> >> To resolve this, for each child of the MDIO bus node, bind and probe >> the generic Ethernet PHY driver if CONFIG_DM_ETH_PHY is enabled. >> >> This should now show the generic_phy_driver in "dm tree" >> and also apply the GPIO reset before the MDIO bus driver scans the bus >> for the PHYs. >> >> ethernet 0 [ + ] am65_cpsw_nuss_port | |-- >> ethernet@800port@1 >> bootdev 3 [ ] eth_bootdev | | `-- >> port@1.bootdev >> mdio 0 [ + ] cpsw_mdio | `-- mdio@f00 >> eth_phy_ge0 [ + ] eth_phy_generic_drv | |-- >> ethernet-phy@0 >> eth_phy_ge1 [ + ] eth_phy_generic_drv | `-- >> ethernet-phy@1 >> >> To test this on Beagleplay, the following series is required >> >> [1] Switch am65-cpsw to DM MDIO >> >> https://lore.kernel.org/all/20240228-for-2024-07-am65-cpsw-mdio-v2-0-f74f972ea...@kernel.org/ >> >> The last 3 patches are marked [not-for-merge]. They are to show how the >> whole solution can work to fix Ethernet on Beagleplay, which has been broken >> so far. Those DT patches will be sent once the device tree changes are merged >> into Linux tree. >> >> Signed-off-by: Roger Quadros > > Some CI tests failed. I will fix and send v2. > https://github.com/u-boot/u-boot/pull/495 I'm unsure if the failure is due to this series or not. https://dev.azure.com/u-boot/u-boot/_build/results?buildId=8023&view=logs&j=a1270dec-081b-5c65-5cd5-5e915a842596&t=69f6cf72-86f3-551a-807d-f28f62a1426f&l=530 Are these known issues? === FAILURES === ___ test_tpm2_sandbox_self_test_full ___ test/py/tests/test_tpm2.py:115: in test_tpm2_sandbox_self_test_full output = u_boot_console.run_command('echo $?') test/py/u_boot_console_base.py:256: in run_command m = self.p.expect([chunk] + self.bad_patterns) test/py/u_boot_spawn.py:193: in expect raise Timeout() E u_boot_spawn.Timeout - Captured stdout call - /u-boot sandbox_serial serial: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 TestEfiSignedImage.test_efi_signed_image_auth5 test/py/tests/test_efi_secboot/test_signed.py:162: in test_efi_signed_image_auth5 output = u_boot_console.run_command_list([ test/py/u_boot_console_base.py:297: in run_command_list output.append(self.run_command(cmd)) test/py/u_boot_console_base.py:256: in run_command m = self.p.expect([chunk] + self.bad_patterns) test/py/u_boot_spawn.py:193: in expect raise Timeout() E u_boot_spawn.Timeout - Captured stdout call - /u-boot sandbox_serial serial: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 > >> --- >> Roger Quadros (5): >> net: mdio-uclass: Bind and probe generic Ethernet PHY driver >> configs/am62x_beagleplay_a53_defconfig: enable DM_ETH_PHY >> [not-for-merge] arm: dts: k3-am62*: sync with linux-next-20240229 >> [not-for-merge] k3-am625-beagleplay-u-boot: get CPSW Ethernet to work >> [not-for-merge] arm: dts: k3-am625-beagleplay: Fix Ethernet PHY reset >> GPIO >> >> arch/arm/dts/k3-am62-main.dtsi | 126 ++--- >> arch/arm/dts/k3-am62-mcu.dtsi| 4 +- >> arch/arm/dts/k3-am62-phycore-som.dtsi| 5 +- >> arch/arm/dts/k3-am62-thermal.dtsi| 5 +- >> arch/arm/dts/k3-am62-verdin-dev.dtsi | 4 +- >> arch/arm/dts/k3-am62-verdin-wifi.dtsi| 1 - >> arch/arm/dts/k3-am62-verdin.dtsi | 76 +++--- >> arch/arm/dts/k3-am62-wakeup.dtsi | 38 +++-- >> arch/arm/dts/k3-am62.dtsi| 4 +- >> arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 63 + >> arch/arm/dts/k3-am625-beagleplay.dts | 66 - >> arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts | 104 +- >> arch/arm/dts/k3-am625-sk.dts | 4 +- >> arch/arm/dts/k3-am625.dtsi | 4 +- >> arch/arm/dts/k3-am62a-main.dtsi | 201 >> +-- >> arch/arm/dts/k3-am62a-mcu.dtsi | 4 +- >> arch/arm/dts/k3-am62a-thermal.dtsi | 5 +- >> arch/arm/dts/k3-am62a-wakeup.dtsi| 4 +- >> arch/arm/dts/k3-am62a.dtsi | 4 +- >> arch/arm/dts/k3-am62a7-sk.dts| 162 - >> arch/arm/dts/k3-am62a7.dtsi | 4 +- >> arch/arm/dts/k3-am62x-sk-common.dtsi | 24 +++- >> configs/am62x_beagleplay_a53_defconfig | 2 +- >> net/mdio-uclass.c
Re: [PATCH 0/5] net: mdio-uclass: probe generic Ethernet PHY driver & Fix Beagleplay Ethernet
On 05/03/2024 15:24, Roger Quadros wrote: > Currently, the GPIO Reset Device Tree properties of the > PHY node are ignored when the PHY is probed via mdio-uclass driver [1]. > > To resolve this, for each child of the MDIO bus node, bind and probe > the generic Ethernet PHY driver if CONFIG_DM_ETH_PHY is enabled. > > This should now show the generic_phy_driver in "dm tree" > and also apply the GPIO reset before the MDIO bus driver scans the bus > for the PHYs. > > ethernet 0 [ + ] am65_cpsw_nuss_port | |-- > ethernet@800port@1 > bootdev 3 [ ] eth_bootdev | | `-- port@1.bootdev > mdio 0 [ + ] cpsw_mdio | `-- mdio@f00 > eth_phy_ge0 [ + ] eth_phy_generic_drv | |-- ethernet-phy@0 > eth_phy_ge1 [ + ] eth_phy_generic_drv | `-- ethernet-phy@1 > > To test this on Beagleplay, the following series is required > > [1] Switch am65-cpsw to DM MDIO > > https://lore.kernel.org/all/20240228-for-2024-07-am65-cpsw-mdio-v2-0-f74f972ea...@kernel.org/ > > The last 3 patches are marked [not-for-merge]. They are to show how the > whole solution can work to fix Ethernet on Beagleplay, which has been broken > so far. Those DT patches will be sent once the device tree changes are merged > into Linux tree. > > Signed-off-by: Roger Quadros Some CI tests failed. I will fix and send v2. https://github.com/u-boot/u-boot/pull/495 > --- > Roger Quadros (5): > net: mdio-uclass: Bind and probe generic Ethernet PHY driver > configs/am62x_beagleplay_a53_defconfig: enable DM_ETH_PHY > [not-for-merge] arm: dts: k3-am62*: sync with linux-next-20240229 > [not-for-merge] k3-am625-beagleplay-u-boot: get CPSW Ethernet to work > [not-for-merge] arm: dts: k3-am625-beagleplay: Fix Ethernet PHY reset > GPIO > > arch/arm/dts/k3-am62-main.dtsi | 126 ++--- > arch/arm/dts/k3-am62-mcu.dtsi| 4 +- > arch/arm/dts/k3-am62-phycore-som.dtsi| 5 +- > arch/arm/dts/k3-am62-thermal.dtsi| 5 +- > arch/arm/dts/k3-am62-verdin-dev.dtsi | 4 +- > arch/arm/dts/k3-am62-verdin-wifi.dtsi| 1 - > arch/arm/dts/k3-am62-verdin.dtsi | 76 +++--- > arch/arm/dts/k3-am62-wakeup.dtsi | 38 +++-- > arch/arm/dts/k3-am62.dtsi| 4 +- > arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 63 + > arch/arm/dts/k3-am625-beagleplay.dts | 66 - > arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts | 104 +- > arch/arm/dts/k3-am625-sk.dts | 4 +- > arch/arm/dts/k3-am625.dtsi | 4 +- > arch/arm/dts/k3-am62a-main.dtsi | 201 > +-- > arch/arm/dts/k3-am62a-mcu.dtsi | 4 +- > arch/arm/dts/k3-am62a-thermal.dtsi | 5 +- > arch/arm/dts/k3-am62a-wakeup.dtsi| 4 +- > arch/arm/dts/k3-am62a.dtsi | 4 +- > arch/arm/dts/k3-am62a7-sk.dts| 162 - > arch/arm/dts/k3-am62a7.dtsi | 4 +- > arch/arm/dts/k3-am62x-sk-common.dtsi | 24 +++- > configs/am62x_beagleplay_a53_defconfig | 2 +- > net/mdio-uclass.c| 41 ++ > 24 files changed, 825 insertions(+), 130 deletions(-) > --- > base-commit: 84f5bb0be0ec9fbf98f8f3317b578dfc114cf44e > change-id: 20240305-for-2024-07-beagleplay-eth-f82a51197937 > > Best regards, -- cheers, -roger