Re: [U-Boot] [PATCH 5/9] openrisc: Add board info printout to cmd_bdinfo
> On Mon, Nov 21, 2011 at 11:53:32PM +0100, Marek Vasut wrote: > > > +int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const > > > argv[]) +{ > > > + bd_t *bd = gd->bd; > > > + > > > + print_num("mem start", (ulong)bd->bi_memstart); > > > + print_lnum("mem size", (u64)bd->bi_memsize); > > > + print_num("flash start",(ulong)bd->bi_flashstart); > > > + print_num("flash size", (ulong)bd->bi_flashsize); > > > + print_num("flash offset", (ulong)bd->bi_flashoffset); > > > + > > > +#if defined(CONFIG_CMD_NET) > > > + print_eth(0); > > > + printf("ip_addr = %pI4\n", &bd->bi_ip_addr); > > > +#endif > > > + > > > + printf("baudrate= %ld bps\n", bd->bi_baudrate); > > > > Would consistent format of the printed data be a problem ? ;-) > > I'm sorry, I don't think I understand what you are referring to here. > When printed, they are all lined up. > If I haven't missed something, every arch does the printing like that. Ok, then that's good. > > Stefan ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 5/9] openrisc: Add board info printout to cmd_bdinfo
On Mon, Nov 21, 2011 at 11:53:32PM +0100, Marek Vasut wrote: > > +int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) > > +{ > > + bd_t *bd = gd->bd; > > + > > + print_num("mem start", (ulong)bd->bi_memstart); > > + print_lnum("mem size", (u64)bd->bi_memsize); > > + print_num("flash start",(ulong)bd->bi_flashstart); > > + print_num("flash size", (ulong)bd->bi_flashsize); > > + print_num("flash offset", (ulong)bd->bi_flashoffset); > > + > > +#if defined(CONFIG_CMD_NET) > > + print_eth(0); > > + printf("ip_addr = %pI4\n", &bd->bi_ip_addr); > > +#endif > > + > > + printf("baudrate= %ld bps\n", bd->bi_baudrate); > > Would consistent format of the printed data be a problem ? ;-) > I'm sorry, I don't think I understand what you are referring to here. When printed, they are all lined up. If I haven't missed something, every arch does the printing like that. Stefan ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 5/9] openrisc: Add board info printout to cmd_bdinfo
> Signed-off-by: Stefan Kristiansson > --- > common/cmd_bdinfo.c | 22 ++ > 1 files changed, 22 insertions(+), 0 deletions(-) > > diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c > index 688b238..1cd69b5 100644 > --- a/common/cmd_bdinfo.c > +++ b/common/cmd_bdinfo.c > @@ -460,6 +460,28 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, > char * const argv[]) return 0; > } > > +#elif defined(CONFIG_OPENRISC) > + > +int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) > +{ > + bd_t *bd = gd->bd; > + > + print_num("mem start", (ulong)bd->bi_memstart); > + print_lnum("mem size", (u64)bd->bi_memsize); > + print_num("flash start",(ulong)bd->bi_flashstart); > + print_num("flash size", (ulong)bd->bi_flashsize); > + print_num("flash offset", (ulong)bd->bi_flashoffset); > + > +#if defined(CONFIG_CMD_NET) > + print_eth(0); > + printf("ip_addr = %pI4\n", &bd->bi_ip_addr); > +#endif > + > + printf("baudrate= %ld bps\n", bd->bi_baudrate); Would consistent format of the printed data be a problem ? ;-) > + > + return 0; > +} > + > #else > #error "a case for this architecture does not exist!" > #endif ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot