Re: [U-Boot] [RFC PATCH 0/8] Add nand_spl support for TI OMAP Beagle
This patch series adds the ability to boot a beagle board from nand without x-loader. A future addition will add mmc boot support. John Rigby (8): NAND: nand_spl/nand_boot.c: add 16-bit and readid support armv7: add nand_spl support OMAP3: and nand_spl support OMAP3: add dram timing constants from x-loader NAND: omap_gpmc.c: add nand_spl support omap3_beagle: add nand_spl support mkimage: Add OMAP boot image support OMAP3: Add ift target to top level Makefile I will be on vacation till the 20th of January. So there might be a little delay in merging this patch series after the review has taken place. I suspect we will have to give some time (probably till 2nd week of January) for review in any case as most people are on vacation. Regards, Sandeep ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [RFC PATCH 0/8] Add nand_spl support for TI OMAP Beagle
On Mon, Dec 27, 2010 at 11:17 PM, Aneesh V ane...@ti.com wrote: Hello John, On Tuesday 28 December 2010 06:17 AM, John Rigby wrote: This patch series adds the ability to boot a beagle board from nand without x-loader. A future addition will add mmc boot support. I had been working on something similar for OMAP4. Basically, I have an SPL ready for MMC on OMAP4. It's working on eMMC in raw mode, but needs some cleanup and also addition of FAT support. I can clean it up and send it out next week(after my vacation) if you like. That would be great. Having both nand and mmc boot would make this much more useful. thanks, John ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [RFC PATCH 0/8] Add nand_spl support for TI OMAP Beagle
Hello John, On Tuesday 28 December 2010 06:17 AM, John Rigby wrote: This patch series adds the ability to boot a beagle board from nand without x-loader. A future addition will add mmc boot support. I had been working on something similar for OMAP4. Basically, I have an SPL ready for MMC on OMAP4. It's working on eMMC in raw mode, but needs some cleanup and also addition of FAT support. I can clean it up and send it out next week(after my vacation) if you like. Best regards, Aneesh ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot