Re: [U2] odbc error "Unable to get UCI configuration file from Registry"
How about I had to download the latest version of the driver? Despite the fact that everyone else in my organization is using the one that I was trying to use? That was Rocket's recommendation, and it worked. Can't argue too much with that. On 3/16/2012 1:23 PM, Colin Alfke wrote: > It was worth a shot - sometimes people miss the easy stuff because they're > concentrating too hard on the complicated stuff. > > It's been close to 10 years since I've really looked at ODBC/OLE access to > UD. I see it's as cryptic as it ever was. I seem to recall an old issue that > required the UCI file to have a blank line at the end - but I'm pretty sure > it had a different error. I remember it worked well once you had the right > driver (I had one that would work with Access but not Excel?!?!?) and you > pedantically followed all of the steps (even so far as casing on a windows > box which is normally case insensitive). > > Good luck! > Colin > > -Original Message- > From: Allen Egerton > Sent: March 16, 2012 11:07 AM > To: U2 Users List > Subject: Re: [U2] odbc error "Unable to get UCI configuration file from > Registry" > > Hi Colin, > > Sorry, I wish it was that simple. After I went through the exercise a > couple of times, I got our tech support involved. He's done at least > several dozen of these installs, (if not more), and he couldn't resolve it > either. > > We've opened a ticket with Rocket, I figured I'd try here because if it's > happening to me, it's probably happened to someone else here, and I might be > able to get this resolved reasonably quickly. > > And of course, it's not that I need ODBC access in and of itself, but rather > that I need it to test something I'm developing... > > Thanks. > > > > On 3/16/2012 12:53 PM, Colin Alfke wrote: >> Sorry, haven't seen it. Are you sure your UCI config file is OK? In my >> UCI config file editor I have options to "Get Registry" and "Reset > Registry" >> under File. Perhaps that will help >> >> hth >> Colin >> >> -Original Message- >> From: Allen Egerton >> Sent: March 16, 2012 10:29 AM >> To: .U2 List >> Subject: [U2] odbc error "Unable to get UCI configuration file from >> Registry" >> >> I'm running Universe clients 10.3 against a server running 10.3, and >> I've done something with my configuration that I can't resolve. >> >> When I attempt to test the connection within the Universe ODBC Data >> Source Setup, I consistently get this message: >> [IBM][UVODBC]90301928]Error ID: 46 Severity: ERROR Facility: DBCAPERR >> - UCI Error. Func: SQLUseCfgFileFn(); State : IA001; uniVerse code:0; >> Msg:[U2][SQL Client]Unable to get UCI configuration file from Registry.." >> >> I've de-installed the driver, cleaned the registry, re-installed the >> driver, removed all Universe client applications/tools, re-installed >> them, loop-repeat. >> >> I know it's not the software itself, because we're using the same >> tools here on similar laptops running the same OS, (windows-7 32bit), > without issues. >> >> I've looked through the archives, looked through Experts-Exchange, and >> googled a number of times. >> >> Has anyone seen this before - and resolved it? >> >> Thank you. >> >> -- >> Allen Egerton > > > ___ > U2-Users mailing list > U2-Users@listserver.u2ug.org > http://listserver.u2ug.org/mailman/listinfo/u2-users > ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
Re: [U2] odbc error "Unable to get UCI configuration file from Registry"
It was worth a shot - sometimes people miss the easy stuff because they're concentrating too hard on the complicated stuff. It's been close to 10 years since I've really looked at ODBC/OLE access to UD. I see it's as cryptic as it ever was. I seem to recall an old issue that required the UCI file to have a blank line at the end - but I'm pretty sure it had a different error. I remember it worked well once you had the right driver (I had one that would work with Access but not Excel?!?!?) and you pedantically followed all of the steps (even so far as casing on a windows box which is normally case insensitive). Good luck! Colin -Original Message- From: Allen Egerton Sent: March 16, 2012 11:07 AM To: U2 Users List Subject: Re: [U2] odbc error "Unable to get UCI configuration file from Registry" Hi Colin, Sorry, I wish it was that simple. After I went through the exercise a couple of times, I got our tech support involved. He's done at least several dozen of these installs, (if not more), and he couldn't resolve it either. We've opened a ticket with Rocket, I figured I'd try here because if it's happening to me, it's probably happened to someone else here, and I might be able to get this resolved reasonably quickly. And of course, it's not that I need ODBC access in and of itself, but rather that I need it to test something I'm developing... Thanks. On 3/16/2012 12:53 PM, Colin Alfke wrote: > Sorry, haven't seen it. Are you sure your UCI config file is OK? In my > UCI config file editor I have options to "Get Registry" and "Reset Registry" > under File. Perhaps that will help > > hth > Colin > > -Original Message- > From: Allen Egerton > Sent: March 16, 2012 10:29 AM > To: .U2 List > Subject: [U2] odbc error "Unable to get UCI configuration file from > Registry" > > I'm running Universe clients 10.3 against a server running 10.3, and > I've done something with my configuration that I can't resolve. > > When I attempt to test the connection within the Universe ODBC Data > Source Setup, I consistently get this message: > [IBM][UVODBC]90301928]Error ID: 46 Severity: ERROR Facility: DBCAPERR > - UCI Error. Func: SQLUseCfgFileFn(); State : IA001; uniVerse code:0; > Msg:[U2][SQL Client]Unable to get UCI configuration file from Registry.." > > I've de-installed the driver, cleaned the registry, re-installed the > driver, removed all Universe client applications/tools, re-installed > them, loop-repeat. > > I know it's not the software itself, because we're using the same > tools here on similar laptops running the same OS, (windows-7 32bit), without issues. > > I've looked through the archives, looked through Experts-Exchange, and > googled a number of times. > > Has anyone seen this before - and resolved it? > > Thank you. > > -- > Allen Egerton ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
Re: [U2] odbc error "Unable to get UCI configuration file from Registry"
Hi Colin, Sorry, I wish it was that simple. After I went through the exercise a couple of times, I got our tech support involved. He's done at least several dozen of these installs, (if not more), and he couldn't resolve it either. We've opened a ticket with Rocket, I figured I'd try here because if it's happening to me, it's probably happened to someone else here, and I might be able to get this resolved reasonably quickly. And of course, it's not that I need ODBC access in and of itself, but rather that I need it to test something I'm developing... Thanks. On 3/16/2012 12:53 PM, Colin Alfke wrote: > Sorry, haven't seen it. Are you sure your UCI config file is OK? In my UCI > config file editor I have options to "Get Registry" and "Reset Registry" > under File. Perhaps that will help > > hth > Colin > > -Original Message----- > From: Allen Egerton > Sent: March 16, 2012 10:29 AM > To: .U2 List > Subject: [U2] odbc error "Unable to get UCI configuration file from > Registry" > > I'm running Universe clients 10.3 against a server running 10.3, and I've > done something with my configuration that I can't resolve. > > When I attempt to test the connection within the Universe ODBC Data Source > Setup, I consistently get this message: > [IBM][UVODBC]90301928]Error ID: 46 Severity: ERROR Facility: DBCAPERR - UCI > Error. Func: SQLUseCfgFileFn(); State : IA001; uniVerse code:0; Msg:[U2][SQL > Client]Unable to get UCI configuration file from Registry.." > > I've de-installed the driver, cleaned the registry, re-installed the driver, > removed all Universe client applications/tools, re-installed them, > loop-repeat. > > I know it's not the software itself, because we're using the same tools here > on similar laptops running the same OS, (windows-7 32bit), without issues. > > I've looked through the archives, looked through Experts-Exchange, and > googled a number of times. > > Has anyone seen this before - and resolved it? > > Thank you. > > -- > Allen Egerton > > > ___ > U2-Users mailing list > U2-Users@listserver.u2ug.org > http://listserver.u2ug.org/mailman/listinfo/u2-users > ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
Re: [U2] odbc error "Unable to get UCI configuration file from Registry"
Sorry, haven't seen it. Are you sure your UCI config file is OK? In my UCI config file editor I have options to "Get Registry" and "Reset Registry" under File. Perhaps that will help hth Colin -Original Message- From: Allen Egerton Sent: March 16, 2012 10:29 AM To: .U2 List Subject: [U2] odbc error "Unable to get UCI configuration file from Registry" I'm running Universe clients 10.3 against a server running 10.3, and I've done something with my configuration that I can't resolve. When I attempt to test the connection within the Universe ODBC Data Source Setup, I consistently get this message: [IBM][UVODBC]90301928]Error ID: 46 Severity: ERROR Facility: DBCAPERR - UCI Error. Func: SQLUseCfgFileFn(); State : IA001; uniVerse code:0; Msg:[U2][SQL Client]Unable to get UCI configuration file from Registry.." I've de-installed the driver, cleaned the registry, re-installed the driver, removed all Universe client applications/tools, re-installed them, loop-repeat. I know it's not the software itself, because we're using the same tools here on similar laptops running the same OS, (windows-7 32bit), without issues. I've looked through the archives, looked through Experts-Exchange, and googled a number of times. Has anyone seen this before - and resolved it? Thank you. -- Allen Egerton ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
[U2] odbc error "Unable to get UCI configuration file from Registry"
I'm running Universe clients 10.3 against a server running 10.3, and I've done something with my configuration that I can't resolve. When I attempt to test the connection within the Universe ODBC Data Source Setup, I consistently get this message: [IBM][UVODBC]90301928]Error ID: 46 Severity: ERROR Facility: DBCAPERR - UCI Error. Func: SQLUseCfgFileFn(); State : IA001; uniVerse code:0; Msg:[U2][SQL Client]Unable to get UCI configuration file from Registry.." I've de-installed the driver, cleaned the registry, re-installed the driver, removed all Universe client applications/tools, re-installed them, loop-repeat. I know it's not the software itself, because we're using the same tools here on similar laptops running the same OS, (windows-7 32bit), without issues. I've looked through the archives, looked through Experts-Exchange, and googled a number of times. Has anyone seen this before - and resolved it? Thank you. -- Allen Egerton; aeger...@pobox.com ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
