Re: [Ubnt_users] AF5x won't link up anymore
Good luck! Hope that fixes it. Whichever side aims more upward is the likely problem if it's water. On Sun, Oct 28, 2018 at 9:13 PM Josh Luthman wrote: > Yep, we're going to swap the master side in the morning and take a look. > > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] AF5x won't link up anymore
They're both level as hell in our area. We do maybe 0.5* at most. Thanks for the luck, gonna need it in the morning :) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sun, Oct 28, 2018, 9:37 PM Don Davis Good luck! Hope that fixes it. Whichever side aims more upward is the > likely problem if it's water. > > On Sun, Oct 28, 2018 at 9:13 PM Josh Luthman > wrote: > >> Yep, we're going to swap the master side in the morning and take a look. >> >> ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] AF5x won't link up anymore
I had one do the same exact things several months ago. Replaced the radio and all was well. Afterwards, I tried to bench test it and couldnt get anything with other radios. On Sun, Oct 28, 2018 at 8:40 PM Josh Luthman wrote: > I have an AF5x link that just went down seemingly out of the blue earlier > this afternoon. It's been running for months at 63/75 (maybe even 12-18 > months?) and chugging along doing it's job. Now we can't get any > association. > > Both sides see an AP we have at 5190 (the BH runs at 5215). This tells me > that the dishes/jumpers are unlikely the issue. > > We replaced the far radio. Got too dark/windy/rainy so we haven't replaced > the master side. I swapped master/slave roles. I changed frequencies and > channel sizes all over the place, I'm not seeing any association what so > ever. I was running 4.0.3 release and finally tried v4.1.0-beta5.32792 - no > change. > > Any ideas short of replacing the master radio? Any other possibilities or > thoughts? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > -- -RickG ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] AF5x won't link up anymore
My issue was ch0 jumper was toast. I'm guessing the management is 100% ch0 which means if it doesn't have a good signal, it'll never associate. Even of ch1 is perfectly fine. Replaced both radios, no resolution. Replaced master jumpers, same signal. Replaced slave jumpers and we no longer have chain imbalance. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Oct 29, 2018 at 1:34 PM, RickG wrote: > I had one do the same exact things several months ago. Replaced the radio > and all was well. Afterwards, I tried to bench test it and couldnt get > anything with other radios. > > On Sun, Oct 28, 2018 at 8:40 PM Josh Luthman > wrote: > >> I have an AF5x link that just went down seemingly out of the blue earlier >> this afternoon. It's been running for months at 63/75 (maybe even 12-18 >> months?) and chugging along doing it's job. Now we can't get any >> association. >> >> Both sides see an AP we have at 5190 (the BH runs at 5215). This tells me >> that the dishes/jumpers are unlikely the issue. >> >> We replaced the far radio. Got too dark/windy/rainy so we haven't >> replaced the master side. I swapped master/slave roles. I changed >> frequencies and channel sizes all over the place, I'm not seeing any >> association what so ever. I was running 4.0.3 release and finally tried >> v4.1.0-beta5.32792 - no change. >> >> Any ideas short of replacing the master radio? Any other possibilities or >> thoughts? >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > > > -- > -RickG > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] AF5x won't link up anymore
That too! Glad you found it! On Mon, Oct 29, 2018 at 1:37 PM Josh Luthman wrote: > My issue was ch0 jumper was toast. I'm guessing the management is 100% > ch0 which means if it doesn't have a good signal, it'll never associate. > Even of ch1 is perfectly fine. > > Replaced both radios, no resolution. Replaced master jumpers, same > signal. Replaced slave jumpers and we no longer have chain imbalance. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Mon, Oct 29, 2018 at 1:34 PM, RickG wrote: > >> I had one do the same exact things several months ago. Replaced the radio >> and all was well. Afterwards, I tried to bench test it and couldnt get >> anything with other radios. >> >> On Sun, Oct 28, 2018 at 8:40 PM Josh Luthman >> wrote: >> >>> I have an AF5x link that just went down seemingly out of the blue >>> earlier this afternoon. It's been running for months at 63/75 (maybe even >>> 12-18 months?) and chugging along doing it's job. Now we can't get any >>> association. >>> >>> Both sides see an AP we have at 5190 (the BH runs at 5215). This tells >>> me that the dishes/jumpers are unlikely the issue. >>> >>> We replaced the far radio. Got too dark/windy/rainy so we haven't >>> replaced the master side. I swapped master/slave roles. I changed >>> frequencies and channel sizes all over the place, I'm not seeing any >>> association what so ever. I was running 4.0.3 release and finally tried >>> v4.1.0-beta5.32792 - no change. >>> >>> Any ideas short of replacing the master radio? Any other possibilities >>> or thoughts? >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> ___ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >> >> >> -- >> -RickG >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > -- -RickG ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] AF5x won't link up anymore
I've noticed in the past that these radios have problems if chain 0 isn't working right, so yeah, I think you're right about the management being only on chain0. From: ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of Josh Luthman [j...@imaginenetworksllc.com] Sent: Monday, October 29, 2018 12:36 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] AF5x won't link up anymore My issue was ch0 jumper was toast. I'm guessing the management is 100% ch0 which means if it doesn't have a good signal, it'll never associate. Even of ch1 is perfectly fine. Replaced both radios, no resolution. Replaced master jumpers, same signal. Replaced slave jumpers and we no longer have chain imbalance. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Oct 29, 2018 at 1:34 PM, RickG mailto:rgunder...@gmail.com>> wrote: I had one do the same exact things several months ago. Replaced the radio and all was well. Afterwards, I tried to bench test it and couldnt get anything with other radios. On Sun, Oct 28, 2018 at 8:40 PM Josh Luthman mailto:j...@imaginenetworksllc.com>> wrote: I have an AF5x link that just went down seemingly out of the blue earlier this afternoon. It's been running for months at 63/75 (maybe even 12-18 months?) and chugging along doing it's job. Now we can't get any association. Both sides see an AP we have at 5190 (the BH runs at 5215). This tells me that the dishes/jumpers are unlikely the issue. We replaced the far radio. Got too dark/windy/rainy so we haven't replaced the master side. I swapped master/slave roles. I changed frequencies and channel sizes all over the place, I'm not seeing any association what so ever. I was running 4.0.3 release and finally tried v4.1.0-beta5.32792 - no change. Any ideas short of replacing the master radio? Any other possibilities or thoughts? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 ___ Ubnt_users mailing list Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org> http://lists.wispa.org/mailman/listinfo/ubnt_users -- -RickG ___ Ubnt_users mailing list Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org> http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users