Re: [Bug 331580] Re: Fails to start in recent jaunty releases
Installed from alpha 4, updated to very latest packages. I update this test machine at least once or twice a day. On Sat, Feb 21, 2009 at 6:41 PM, Eddie M. eddiemarti...@gmail.com wrote: which release? daily build, etc? ** Changed in: saods9 (Ubuntu) Status: New = Incomplete -- Fails to start in recent jaunty releases https://bugs.launchpad.net/bugs/331580 You received this bug notification because you are a direct subscriber of the bug. -- Fails to start in recent jaunty releases https://bugs.launchpad.net/bugs/331580 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 331580] [NEW] Fails to start in recent jaunty releases
Public bug reported: Binary package hint: saods9 There was a recent update to the tk libraries, and since then ds9 no longer starts, with the following error message: version conflict for package Tcl: have 8.4, need 8.5 couldn't open /usr/lib/tclIndex: no such file or directory while executing open [file join $dir tclIndex] ** Affects: saods9 (Ubuntu) Importance: Undecided Status: New -- Fails to start in recent jaunty releases https://bugs.launchpad.net/bugs/331580 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315780] Re: /etc/udev/rules.d not a directory on boot
Just installed jaunty alpha 3 and can confirm this. Causes my laptop to beep like crazy for 4 or 5 seconds after printing this message. ** Changed in: udev (Ubuntu) Status: New = Confirmed -- /etc/udev/rules.d not a directory on boot https://bugs.launchpad.net/bugs/315780 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317688] [NEW] ecb breaks customize
Public bug reported: Binary package hint: ecb M-x customize works fine with a clean emacs install (and no emacs setup) Running M-x ecb-activate starts up ecb as expected, however running any customize command (customize/customize-group/customize-appropos etc.) causes a new empty buffer to be created, with the name you would expect for that buffer, however the actual customize ui is dumped into whatever the currently open buffer was, so the customize buffer is empty, and it instead actually modifies whatever file you had open. ** Affects: ecb (Ubuntu) Importance: Undecided Status: New -- ecb breaks customize https://bugs.launchpad.net/bugs/317688 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 270377] Re: content of window do not redraw automatically (intrepid)
Im using nvidia-glx-180 from proposed and the problem is still there (although less with firefox, and worse with gnome-terminal and emacs) Tom On Wed, Jan 14, 2009 at 1:42 AM, Eric Butler e...@extremeboredom.netwrote: Hey everyone, I was also having this problem with Firefox and Qt4 apps. I'm fairly sure the problem is gone since switching to the beta nvidia driver (nvidia-glx-180). Could someone else give this a try too and report back? -- content of window do not redraw automatically (intrepid) https://bugs.launchpad.net/bugs/270377 You received this bug notification because you are a direct subscriber of the bug. -- content of window do not redraw automatically (intrepid) https://bugs.launchpad.net/bugs/270377 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 270377] Re: content of window do not redraw automatically (intrepid)
Just done a fresh intrepid install + updates and im getting the same problem, absolutely no tweaking done to x/compiz/whatever settings, just a fresh install. Pretty much every single time i run an aptitude command in gnome-terminal i get this, occasionally get it in firefox, and frequently get it when running emacs. If i go to the appearence settings and set visual effects to None the problem dissapears. I also tried with the updates from -proposed (nvidia 180 and i think there was a compiz update too) and the problem is at least as bad, if not worse. Single head setting on laptop, 1280x800 resolution screen. Nvidia card info from nvidia-settings: GeForce 8400M GS PCI Express 16x Any more info that would be useful just ask and i'll post it here. -- content of window do not redraw automatically (intrepid) https://bugs.launchpad.net/bugs/270377 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 131094] Re: Heavy Disk I/O harms desktop responsiveness
Does this mean this will likely ship with intrepid? On Fri, Jul 25, 2008 at 5:34 PM, Martin [EMAIL PROTECTED] wrote: FWIW, delayed allocation was added for ext4 in the 2.6.27 merge window. -- Heavy Disk I/O harms desktop responsiveness https://bugs.launchpad.net/bugs/131094 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 132654] Re: Depends directly on ttf-bitstream-vera
No longer the case, marking as fix released. ** Changed in: pyopengl (Ubuntu) Sourcepackagename: python-opengl = pyopengl Status: New = Fix Released -- Depends directly on ttf-bitstream-vera https://bugs.launchpad.net/bugs/132654 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140511] Re: Belkin USB bluetooth device loads wrong module
Updated to 2.6.24.17.19 linux-image today from hardy-proposed. Plugging the bluetooth module in now no longer hangs the kernel, and the gnome bluetooth applet shows up in my status bar. Thanks for getting this in. -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 102807] Re: fullscreen/wine bug
I'm marking this as fixed released as the most recent compiz and wine combo in hardy seems to resolve this issue. ** Changed in: compiz (Ubuntu) Status: Confirmed = Fix Released -- fullscreen/wine bug https://bugs.launchpad.net/bugs/102807 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 132191] Re: installs unuseable desktop file to bzr commit-notify
Don't think its invalid, the desktop file is still there as of hardy latest, and the bzr commit-notify command still does not exist. ** Changed in: bzr-gtk (Ubuntu) Status: Incomplete = Confirmed -- installs unuseable desktop file to bzr commit-notify https://bugs.launchpad.net/bugs/132191 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140511] Re: Belkin USB bluetooth device loads wrong module
Any reason this hasn't gone into the recent kernel uploads? -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 140511] Re: Belkin USB bluetooth device loads wrong module
Ah ok, no worries. There wasn't any more traffic on the bug so i had assumed everthing was ok. ** Attachment added: unnamed http://launchpadlibrarian.net/13236456/unnamed -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 192152] Re: ubuntu studio color theme results in unreadable urls on dropdown bar w/ FF3
Confirming ** Changed in: ubuntustudio-look (Ubuntu) Status: New = Confirmed -- ubuntu studio color theme results in unreadable urls on dropdown bar w/ FF3 https://bugs.launchpad.net/bugs/192152 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 131657] Re: [gutsy] KVM core dumps with -std-vga
With the hardy version of kvm this now works correctly. This bug however has [gutsy] tag so im not sure if it should be closed as fix released or not. ** Changed in: kvm (Ubuntu) Status: Confirmed = Fix Released -- [gutsy] KVM core dumps with -std-vga https://bugs.launchpad.net/bugs/131657 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140511] Re: Belkin USB bluetooth device loads wrong module
Yes, that fixes it! I had look at the package install log, and it seems update-initramfs takes some shortcuts when installing a kernel package over an existing one. I'm glad as console completely broken means all my tty's are completely blank, no matter what, so im glad i didnt have to debug it there. Thanks for getting that patch working. -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 140511] Re: Belkin USB bluetooth device loads wrong module
Sure, downloading the latest kernel source now, will let you know hoe it works out. -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140511] Re: Belkin USB bluetooth device loads wrong module
Ok, good and bad news. Bad news is, i still cant boot my machine with it plugged in, it just hangs, even after unplugging the device which it didnt used to, but i cant debug that as i have a geforce 8/amd64 box and the console is currently completely broken. Good news though, if i plug the device into a booted system, it works fine now. The dmesg output for that is : [ 142.004237] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 142.004813] pegasus: checking blacklist for 050d:0121 [ 142.004817] pegasus: class=224 protocol=1 [ 142.004818] pegasus: blacklisted! [ 142.005638] pegasus: checking blacklist for 050d:0121 [ 142.005641] pegasus: class=224 protocol=1 [ 142.005643] pegasus: blacklisted! [ 142.006350] pegasus: checking blacklist for 050d:0121 [ 142.006353] pegasus: class=224 protocol=1 [ 142.006354] pegasus: blacklisted! [ 142.007024] pegasus: checking blacklist for 050d:0121 [ 142.007027] pegasus: class=224 protocol=1 [ 142.007028] pegasus: blacklisted! [ 142.007701] usbcore: registered new interface driver pegasus [ 142.067996] Bluetooth: HCI USB driver ver 2.9 [ 142.069660] usbcore: registered new interface driver hci_usb -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 140511] Re: Belkin USB bluetooth device loads wrong module
There is no update-initramdisk, do you mean update-initramfs? I rebuilt the whole kernel package though, and it it do that as part of the install -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 147623] Re: [amd64 + nvidia 8xxx] usplash shows nothing
Just want to change my statement earlier about the vesafb workaround, as of the latest kernel my ttys are all blank except for the blinking cursor. -- [amd64 + nvidia 8xxx] usplash shows nothing https://bugs.launchpad.net/bugs/147623 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 180962] Re: new GTK widgets could look better
** Bug watch added: Mozilla Bugzilla #387036 https://bugzilla.mozilla.org/show_bug.cgi?id=387036 ** Also affects: firefox via https://bugzilla.mozilla.org/show_bug.cgi?id=387036 Importance: Unknown Status: Unknown -- new GTK widgets could look better https://bugs.launchpad.net/bugs/180962 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 147623] Re: [amd64 + nvidia 8xxx] usplash shows nothing
No problems here, i can switch between xorg running nvidia binary driver, and my terminals without problem. Never had any problemswith usplash booting up/shutting down either. The only thing that i havent tried would be suspend, as this is on a big honking workstation rather than a laptop. -- [amd64 + nvidia 8xxx] usplash shows nothing https://bugs.launchpad.net/bugs/147623 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140511] Re: Belkin USB bluetooth device loads wrong module
Stefan, here's the output with the new patch (it doesn't do the second printk for obvious reasons): [ 134.488058] usb 6-2.3: new full speed USB device using ehci_hcd and address 5 [ 134.584448] usb 6-2.3: configuration #1 chosen from 1 choice [ 134.719346] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 134.719868] We got 50d:121 class=0 proto=0 Looking at the patch now, should it not be: if (id-bDeviceClass != USB_CLASS_WIRELESS_CONTROLLER id-bDeviceProtocol != 1) It looks to my untrained eye as if we are doing the goto outin the case of it actually being a pegasus usb network device, rather than _not_ a pegasus usb network device? -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 140511] Re: Belkin USB bluetooth device loads wrong module
I did try looking at some of the kernel code to see if i could figure it out, but im at a deadline for some work right now so just cant spare the time to go too in depth. I'm happy to try any new patches though if you can figure out whats going on. -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 191372] Re: crash starting cheese
Finally got round to trying to get a backtrace, but it seems to have been fixed by the latest upload of the gstreamer v4l plugins. ** Changed in: cheese (Ubuntu) Status: Incomplete = Fix Released -- crash starting cheese https://bugs.launchpad.net/bugs/191372 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 140511] Re: Belkin USB bluetooth device loads wrong module
I did rebuild the initramdisk (not manually, i rebuilt the kernel using the source pacakge and replaced the installed one, which did rebuild that), my guess would be the if condition isnt exactly right, but im not even slightly familiar with the code. -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 140511] Re: Belkin USB bluetooth device loads wrong module
Thanks stefan, i was being an idiot and didnt have the deb-src lines enabled. Currently downloading now and i'll get it built and tested in the next few hours. -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140511] Re: Belkin USB bluetooth device loads wrong module
Patch does not work, it still hangs trying to load the pegasus module. -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 192425] Re: Logitech MX Revolution mouse doesnt move pointer correctly
I booted up a gutsy live cd just to check if it still worked there, and it didnt for some reason. Just unplugging and plugging back in the usb reciever actually makes it work again. Closing off for as invalid for now, if it happens again i'll try to investigate some more. ** Changed in: xserver-xorg-input-evdev (Ubuntu) Status: New = Invalid -- Logitech MX Revolution mouse doesnt move pointer correctly https://bugs.launchpad.net/bugs/192425 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 192425] Re: Logitech MX Revolution mouse doesnt move pointer correctly
Sorry, just to clarify, the mouse works neither with my old config, or a completely new xorg.conf file. I don't know what other information would be helpful, so let me know anything that can help and i'll add that. -- Logitech MX Revolution mouse doesnt move pointer correctly https://bugs.launchpad.net/bugs/192425 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 192425] Re: Logitech MX Revolution mouse doesnt move pointer correctly
Attaching current xorg.conf ** Attachment added: xorg.conf http://launchpadlibrarian.net/12038168/xorg.conf -- Logitech MX Revolution mouse doesnt move pointer correctly https://bugs.launchpad.net/bugs/192425 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 192425] [NEW] Logitech MX Revolution mouse doesnt move pointer correctly
Public bug reported: Binary package hint: xserver-xorg-input-evdev Since upgrading to hardy, my mx revolution mouse no longer works correctly. If i move the mouse, the pointer doesnt move, then a few seconds later jumps in the direction i moved the mouse. I can plug in an older usb optical mouse and that works fine. I used to use this in my xorg.conf: Section InputDevice Identifier Logitech MX Revolution Driver evdev Option Phys usb-*/input0 Option Name Logitech USB Receiver Option CorePointer EndSection However I have completely reset my xorg.conf using dpkg-reconfigure -phigh and attached that to the bug report. The only customisation of this xorg.conf file has been for dual screening, and setting the keyboard to gb. ** Affects: xserver-xorg-input-evdev (Ubuntu) Importance: Undecided Status: New -- Logitech MX Revolution mouse doesnt move pointer correctly https://bugs.launchpad.net/bugs/192425 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 102807] Re: fullscreen/wine bug
This has gotten worse with the latest compiz in hardy (1:0.7.0-0ubuntu2), even with the correct workaround options enabled, it ends up drawing the window behind the panels. -- fullscreen/wine bug https://bugs.launchpad.net/bugs/102807 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140511] Re: Belkin USB bluetooth device loads wrong module
Updated to hardy today, bug still present -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 44082] Re: GNOME Panel icons (on right side) move apparently randomly on session start in some situations
Yes, if you move things a few pixels apart they keep their position, it gets broken again if one of them (normally the clock) gets big enough to go over the space, as this happens with day/month changes. It also seems to only happen when on a screen which doesnt have a position of +0+0 i.e a monitor on the right, doesnt matter whether primary or secondary. Its not always the clock that changes position, its often the volume/systray for me. Tom On Feb 6, 2008 3:26 PM, Jo-Erlend Schinstad [EMAIL PROTECTED] wrote: Do you mean posision as the posision specified in gconf? Because that would be interesting. There is a configuration option for panel applets, called panel_right_stick. It seems that all of thiese problems are related to applets on the far right of the screen. Has anyone tried to move the panels a couple of pixels away from the edge and other applets and made sure panel_right_stick isn't enabled? It's just a wild guess, but could be worth a try. Is it always the clock that's being pushed to the left? It's the applet that takes the longest time to load here.. Might that have anything to do with it? -- GNOME Panel icons (on right side) move apparently randomly on session start in some situations https://bugs.launchpad.net/bugs/44082 You received this bug notification because you are a direct subscriber of the bug. -- GNOME Panel icons (on right side) move apparently randomly on session start in some situations https://bugs.launchpad.net/bugs/44082 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 44082] Re: GNOME Panel icons (on right side) move apparently randomly on session start in some situations
For me the problem did always seem to come and ago, i could often do many reboots/relogs with no problems, then it would move stuff around every time etc. On Feb 6, 2008 5:41 PM, John Toliver [EMAIL PROTECTED] wrote: Actually it's stopped doing this. I don't believe I've done anything differently. It's gone from a problem happening every reboot to happening every month etc. The next time it does happen I will move the icons a few pixels away and test this On Feb 6, 2008 10:26 AM, Jo-Erlend Schinstad [EMAIL PROTECTED] wrote: Do you mean posision as the posision specified in gconf? Because that would be interesting. There is a configuration option for panel applets, called panel_right_stick. It seems that all of thiese problems are related to applets on the far right of the screen. Has anyone tried to move the panels a couple of pixels away from the edge and other applets and made sure panel_right_stick isn't enabled? It's just a wild guess, but could be worth a try. Is it always the clock that's being pushed to the left? It's the applet that takes the longest time to load here.. Might that have anything to do with it? -- GNOME Panel icons (on right side) move apparently randomly on session start in some situations https://bugs.launchpad.net/bugs/44082 You received this bug notification because you are a direct subscriber of the bug. -- Patience yields far greater results than brute force or rage ever could so relax..it's just life !!! -- GNOME Panel icons (on right side) move apparently randomly on session start in some situations https://bugs.launchpad.net/bugs/44082 You received this bug notification because you are a direct subscriber of the bug. -- GNOME Panel icons (on right side) move apparently randomly on session start in some situations https://bugs.launchpad.net/bugs/44082 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 147623] Re: [amd64 + nvidia 8xxx] usplash shows nothing
Even worse, in some cases like mine X doesnt even come up due this problem (which i assume is a clash between the dodgy fb driver and the nv driver), the only reason i ever got around it was that i knew enough to try a nosplash boot. -- [amd64 + nvidia 8xxx] usplash shows nothing https://bugs.launchpad.net/bugs/147623 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 147623] Re: [EM64T]When booting, screen stays black.
Why should it be in linux restricted modules? This bug happens without using any restricted modules at all. -- [EM64T]When booting, screen stays black. https://bugs.launchpad.net/bugs/147623 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 147623] Re: [EM64T][gutsy beta] When booting gutsy, screen stays black.
I can also confirm this bug with geforce 8800 on amd64 Also confirming it is definately 64 bit specific, as 32 bit gutsy is fine. Would have jumped in earlier, but didnt start using 64 bit build till gutsy was released. -- [EM64T][gutsy beta] When booting gutsy, screen stays black. https://bugs.launchpad.net/bugs/147623 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 159288] ui fonts dont respect gnome font settings
Public bug reported: Binary package hint: openoffice.org Chaning the hinting settings in System-Appeareance-Fonts has no effect on the UI fonts in openoffice. I always change my settings to Subpixel Rendering - Slight and the Openoffice UI fonts still appear to be whatever was the default (best shapes or best contrast, i forget which). ** Affects: openoffice.org (Ubuntu) Importance: Undecided Status: New -- ui fonts dont respect gnome font settings https://bugs.launchpad.net/bugs/159288 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 131094] Re: Heavy Disk I/O harms desktop responsiveness
I had already tried the ionice in one of the bugs closed off as a dup, it makes absolutely no difference whatsoever On 02/10/2007, Amit Kucheria [EMAIL PROTECTED] wrote: As pointed out by Jeff above, can someone having the problems run trackerd with ionice. e.g. ionice -c3 -ppid of trackerd -- Heavy Disk I/O harms desktop responsiveness https://bugs.launchpad.net/bugs/131094 You received this bug notification because you are a direct subscriber of the bug. -- Tom Badran http://badrunner.net -- Heavy Disk I/O harms desktop responsiveness https://bugs.launchpad.net/bugs/131094 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 147603] Re: ubuntustudio-menu 0.5 main menu shows only Places and System other entries of the menu are not available
I can confirm this. It also stays that way on uninstall of the pacakge. ** Changed in: ubuntustudio-menu (Ubuntu) Status: New = Confirmed -- ubuntustudio-menu 0.5 main menu shows only Places and System other entries of the menu are not available https://bugs.launchpad.net/bugs/147603 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 131094] Re: Heavy Disk I/O harms desktop responsiveness
I am on a sata machine, however i never had a problem with file copy throughut speed etc., its just interactivity. On 29/09/2007, Jamie McCracken [EMAIL PROTECTED] wrote: Could this be sata related? Can everyone who has this problem indicate if this is so? just wondering if its related to https://bugs.launchpad.net/ubuntu/+source/linux- source-2.6.20/+bug/119730 -- Heavy Disk I/O harms desktop responsiveness https://bugs.launchpad.net/bugs/131094 You received this bug notification because you are a direct subscriber of the bug. -- Tom Badran http://badrunner.net -- Heavy Disk I/O harms desktop responsiveness https://bugs.launchpad.net/bugs/131094 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134778] Re: cheese hangs on startup
This seems to have been fixed with recent uploads of gstreamer. ** Changed in: cheese (Ubuntu) Status: Triaged = Fix Released ** Changed in: gstreamer0.10 (Ubuntu) Status: Confirmed = Fix Released -- cheese hangs on startup https://bugs.launchpad.net/bugs/134778 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 141543] Gutsy regression - compiz no longer starts with a failed 3d texture size check
Public bug reported: Binary package hint: compiz With the latest upload, compiz no longer starts with the following output: Checking for Xgl: not present. Detected PCI ID for VGA: 01:00.0 0300: 10de:0193 (rev a2) (prog-if 00 [VGA]) Checking for texture_from_pixmap: present. Checking for non power of two support: present. Checking for Composite extension: present. Comparing resolution (3360x1050) to maximum 3D texture size (2048): Failed. aborting and using fallback: /usr/bin/metacity This has always worked up until very recently in the gutsy dev cycle. I'm using nvidia-glx-new with a twinview setup of 2 x 1680x1050 screens. I havent changed anything else in my setup at all, it just stopped working when i updated. ** Affects: compiz (Ubuntu) Importance: Undecided Status: New -- Gutsy regression - compiz no longer starts with a failed 3d texture size check https://bugs.launchpad.net/bugs/141543 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 124519] Re: need to add max texture size check
I think this fix may have broken my setup, and be responsible for #141543 which i recently filed. -- need to add max texture size check https://bugs.launchpad.net/bugs/124519 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 141543] Re: Gutsy regression - compiz no longer starts with a failed 3d texture size check
Well it gets past the texture size check. Tt still says '3D Texture Size', I think thats a typo as compiz definately does not use 3D Textures for normal rendereing (whoever wrote the script perhaps does not understand what they are). However, it now fails as such: Checking for Xgl: not present. Detected PCI ID for VGA: 01:00.0 0300: 10de:0193 (rev a2) (prog-if 00 [VGA]) Checking for texture_from_pixmap: present. Checking for non power of two support: present. Checking for Composite extension: present. Comparing resolution (3360x1050) to maximum 3D texture size (8192): Passed. Checking for nVidia: present. Checking for FBConfig: present. Checking for Xgl: not present. /usr/bin/compiz: 376: /usr/local/bin/compiz: not found -- Gutsy regression - compiz no longer starts with a failed 3d texture size check https://bugs.launchpad.net/bugs/141543 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140511] Re: Belkin USB bluetooth device loads wrong module
** Changed in: linux-source-2.6.22 (Ubuntu) Status: Invalid = New -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140511] Re: Belkin USB bluetooth device loads wrong module
Sure. I'm not actually sure which is the correct module, but i found a post on some mailing list (sorry, lost the link) that suggested blacklisting pegasus would make it work. Here is the output of lsmod with the bluetooh dongle working correctly. ** Attachment added: lsmod.out http://launchpadlibrarian.net/9413549/lsmod.out -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140511] Re: Belkin USB bluetooth device loads wrong module
** Also affects: linux-source-2.6.22 (Ubuntu) Importance: Undecided Status: New -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140489] Podcasts dont show up in iPod podcasts menu
Public bug reported: Binary package hint: banshee Podcasts downloaded with the podcast plugin sync to the ipod and can be played, however they dont show up in the Music-Podcasts menu on the iPod. I guess this is just a missing piece of metadata/list in the database. I did have a quick google to see if it was something obvious, but didn't spot anything. ** Affects: banshee (Ubuntu) Importance: Undecided Status: New -- Podcasts dont show up in iPod podcasts menu https://bugs.launchpad.net/bugs/140489 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140511] Belkin USB bluetooth device loads wrong module
Public bug reported: Binary package hint: module-init-tools I have a usb bluetooth adapter (Belkin F8T012xx1, FCC: K7SF8t012, IC: 3632A-F8T012) identified by lsusb as: Bus 003 Device 003: ID 050d:0121 Belkin Components F5D5050 100Mbps Ethernet By default the 'pegasus' driver is loaded, however this causes subsequent lsusb commands to hang forever, and actually causes a loud tone to play from the pc speaker, and the system to hang if i unplug and reattach the device. It also doesnt allow the bluetooth functionality to work. If i blacklist pegasus in /etc/modprobe.d/blacklist then it works correctly. Obviously a global blacklist on pegasus is not the right solution, but i have no idea how to fix this properly for one device. ** Affects: module-init-tools (Ubuntu) Importance: Undecided Status: New -- Belkin USB bluetooth device loads wrong module https://bugs.launchpad.net/bugs/140511 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 135115] Re: tracker causing very high disk useage/thrashing
I've done a fresh gutsy install (tribe 5 + immediately updating) with a new home directory too (i wanted to split my / /home and /usr/local partitions anyway, so it seemed like a good time) and i dont seem to be having any problems now. In response to Jamie, the files in .cache/tracker were around 100-200megs each, as opposed to gigs. The only difference i know for certain between a fresh install and what i had however, was that i did have a n extensive wine directory before (although it was marked as not to be indexed) I'll leave the bug open for the next few days, and post some more info based on jamie's hints for debugging. If it doesn't reappear ill close the bug off then. -- tracker causing very high disk useage/thrashing https://bugs.launchpad.net/bugs/135115 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 135115] Re: tracker causing very high disk useage/thrashing
*** This bug is a duplicate of bug 131094 *** https://bugs.launchpad.net/bugs/131094 Jamie, that bug pretty much describes my entire experience with gutsy up until now, and oddly like metioned in that bug disabling esd actually helps too. It does seem that there is a serious problem with 2.6.22 with regards to io/cpu scheduling, i've never been very happy with gutsy in that regard. I do have a very powerful machine, and notice regular problems (which were extremely exacerbated by tracker hence filing the bug here). ** This bug has been marked a duplicate of bug 131094 Heavy Disk I/O harms desktop responsiveness -- tracker causing very high disk useage/thrashing https://bugs.launchpad.net/bugs/135115 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 131094] Re: Heavy Disk I/O harms desktop responsiveness
I've marked the bug i filed against trackerd as a dup against this bug. Like i say, a fresh install has made a substantial difference (completely unuseable machien with trackerd - useable). I do however still hear my disk being hit fairly often. Its not impacting interactivity as severely as it used to, but there are still noticeable short stalls doing fairly trivial things such as opening menus etc. -- Heavy Disk I/O harms desktop responsiveness https://bugs.launchpad.net/bugs/131094 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 135115] Re: tracker causing very high disk useage/thrashing
Recent update makes no noticieable difference to this problem for me, the cpu useage is definately down, but my disk is still grinding away and its noticeably affecting interactivity of other programs. There doesnt seem to be a reopened status, so set back to confirmed, not sure if thats correct. ** Changed in: tracker (Ubuntu) Status: Fix Released = Confirmed -- tracker causing very high disk useage/thrashing https://bugs.launchpad.net/bugs/135115 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 135115] Re: tracker causing very high disk useage/thrashing
Hey Migeul, afraid that makes absolutely no noticeable difference. I guess this bug is due to something else. Any thing else you can think of that can help diagnose the problem? I can collect any system info you need here. -- tracker causing very high disk useage/thrashing https://bugs.launchpad.net/bugs/135115 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134778] Re: cheese hangs on startup
I cant add a backtrace, if you read the report, there is no crash, it just freezes on startup and does nothing. ** Changed in: cheese (Ubuntu) Status: Incomplete = Confirmed ** Changed in: gstreamer0.10 (Ubuntu) Status: Incomplete = Confirmed -- cheese hangs on startup https://bugs.launchpad.net/bugs/134778 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 135287] show far too many spelling suggestions in context menu
Public bug reported: Binary package hint: evolution Using the english british dictionary, words such as 'im' and 'thats' (missing apostrophe) show many many (more than screen height for im) suggestions in the right click menu in the composer. I often type im instead of I'm so i probably notice this more often than most. The suggestions here should really be limited to maybe 5 or so of the most likely. ProblemType: Bug Architecture: i386 Date: Tue Aug 28 14:45:15 2007 DistroRelease: Ubuntu 7.10 ExecutablePath: /usr/bin/evolution NonfreeKernelModules: nvidia Package: evolution 2.11.91-0ubuntu1 PackageArchitecture: i386 ProcCmdline: evolution --component=mail ProcCwd: /home/tom ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: evolution Uname: Linux vader 2.6.22-10-386 #1 Wed Aug 22 07:43:24 GMT 2007 i686 GNU/Linux ** Affects: evolution (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- show far too many spelling suggestions in context menu https://bugs.launchpad.net/bugs/135287 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 135287] Re: show far too many spelling suggestions in context menu
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/9028387/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/9028388/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/9028389/ProcStatus.txt -- show far too many spelling suggestions in context menu https://bugs.launchpad.net/bugs/135287 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 127060] Re: Fails to start with mcop error
*** This bug is a duplicate of bug 55973 *** https://bugs.launchpad.net/bugs/55973 I think so, marking as dup of #55973 ** This bug has been marked a duplicate of bug 55973 Patch for crash with message can't create MCOP directory -- Fails to start with mcop error https://bugs.launchpad.net/bugs/127060 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134778] Re: cheese hangs on startup
Afraid 0.2.2-0ubuntu3 makes no difference with this particular camera. Setting back to new (not sure thats the correct state, correct me if wrong) -- cheese hangs on startup https://bugs.launchpad.net/bugs/134778 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 135115] tracker causing very high disk useage/thrashing
Public bug reported: Binary package hint: tracker I've been tracking gutsy for a few months now, recently i noticed my disk just seems to be constantly in use (its not very quiet in this machine). The only things that seem to be running according to top are trackerd processes. They are reniced to 19 which seems sensible, but the disk useage is just crazy. Doing a full dd dump of the entire disk takes roughly 15minutes. However the tracker processes just seem to run for ages (1hour) and cause the disk to be constantly in use for this whole time. Every now and then the system just seems to stall and things that take 1 second usually (opening a terminal window is a good test of this) end up taking approximately 10 seconds. During these stalls the whole interface seems to be unresponsive too. I dont know exactly whats going on that causes this, but the only consistent element when investigating this has been 3 trackerd process, niced at 19, using roughly 9% cpu each (although this cpu use percentage does jump around alot, varying from 1% to 10%). ** Affects: tracker (Ubuntu) Importance: Undecided Status: New -- tracker causing very high disk useage/thrashing https://bugs.launchpad.net/bugs/135115 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 44082] Re: GNOME Panel icons (on right side) move apparently randomly on session start in some situations
I can confirm im getting the same problem. All my applets are locked, and anything on the right hand side of top or bottom panels appears in a random order on login, no matter how much i reset their positions etc. This is on a dual screen setup with two 1680x1050 monitors, primary on right, secondary on left. -- GNOME Panel icons (on right side) move apparently randomly on session start in some situations https://bugs.launchpad.net/bugs/44082 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134778] cheese hangs on startup
Public bug reported: Binary package hint: cheese When i start cheese it just gets as far as opening a blank window and hangs (doesnt crash, just freezes and does nothing, ever). This camera does works fine with ekiga, canoraram and even kstars. Output of cam from lsusb: Bus 007 Device 006: ID 0471:0311 Philips PCVC740K ToUcam Pro [pwc] ** Affects: cheese (Ubuntu) Importance: Undecided Status: New ** Affects: gstreamer0.10 (Ubuntu) Importance: Undecided Status: New ** Also affects: gstreamer0.10 (Ubuntu) Importance: Undecided Status: New -- cheese hangs on startup https://bugs.launchpad.net/bugs/134778 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134778] Re: cheese hangs on startup
Added bug to gstreamer too and pasting in console output. If you need any more info or want me to try any gstreamer piplines just give the command line to try and i'll add more. ** Message: Probing the webcam, please ignore the following, not applicabable tries ** Message: Error running pipeline 'v4l2src ! fakesink': Could not get parameters on device '/dev/video0' [v4l2src_calls.c(938): gst_v4l2src_set_capture (): /pipeline0/v4l2src0: system error: Invalid argument] ** Message: test pipeline for v4l2src failed: [v4l2src ! fakesink]: Could not get parameters on device '/dev/video0' ** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=640,height=480 ! fakesink': Could not negotiate format [gstbasesrc.c(2062): gst_base_src_start (): /pipeline1/v4lsrc0: Check your filtered caps, if any] ** Message: test pipeline for v4lsrc failed: [v4lsrc ! video/x-raw-rgb,width=640,height=480 ! fakesink]: Could not negotiate format using source: v4lsrc ! video/x-raw-yuv,width=640,height=480 ! ffmpegcolorspace -- cheese hangs on startup https://bugs.launchpad.net/bugs/134778 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134360] crash when changing image alignment in signature
Public bug reported: Binary package hint: evolution Apport doesnt seem to be picking this up, but its easy to reproduce. Just do Preference Compaoser - Signatures The add/edit one, set its format to html, add an image, add some text, and then right click the image and under Image Style set the alignment to middle. ** Affects: evolution (Ubuntu) Importance: Undecided Status: New -- crash when changing image alignment in signature https://bugs.launchpad.net/bugs/134360 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134360] Re: crash when changing image alignment in signature
Apologies, forgot to state this is on gutsy with latest evolution (2.11.90-0ubuntu2), not feisty. Ill try to get something useful backtrace wise too. ** Changed in: evolution (Ubuntu) Status: Incomplete = New -- crash when changing image alignment in signature https://bugs.launchpad.net/bugs/134360 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134360] Re: crash when changing image alignment in signature
Ugghh, just to be awkward, when i run evo in gdb, i get the same crash but it just the output is just: [Thread debugging using libthread_db enabled] [New Thread -1233823056 (LWP 16149)] CalDAV Eplugin starting up ... Program exited normally. So not very useful at all ... Is it possible to to reset my apport ignore settings so i can capture the crash properly? I assume its in evolution-data-server .. -- crash when changing image alignment in signature https://bugs.launchpad.net/bugs/134360 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 132654] Depends directly on ttf-bitstream-vera
Public bug reported: The package depends directly on a font package, namely ttf-bitstream- vera I cant see a reason why opengl bindings would need to depend directly on a font, but if they require the bitstream vera glyphs for some reason, they should depend on vera or the the ttf-dejavu fonts, as these are a superset of the vera glyphs. ** Affects: python-opengl (Ubuntu) Importance: Undecided Status: New -- Depends directly on ttf-bitstream-vera https://bugs.launchpad.net/bugs/132654 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 132672] Undocumented Solaris Mode option
Public bug reported: Binary package hint: gnome-system-monitor In Preferences-processes there is an option Solaris Mode which has no tool tip or help documentation. My guess is this doesnt even make sense on a linux system and should be removed, or restated/documented to actually make sense. ProblemType: Bug Architecture: i386 Date: Wed Aug 15 13:59:30 2007 DistroRelease: Ubuntu 7.10 ExecutablePath: /usr/bin/gnome-system-monitor NonfreeKernelModules: nvidia Package: gnome-system-monitor 2.19.6-0ubuntu1 PackageArchitecture: i386 ProcCmdline: gnome-system-monitor ProcCwd: /home/tom ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: gnome-system-monitor Uname: Linux vader 2.6.22-9-generic #1 SMP Fri Aug 3 00:50:37 GMT 2007 i686 GNU/Linux ** Affects: gnome-system-monitor (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- Undocumented Solaris Mode option https://bugs.launchpad.net/bugs/132672 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 132672] Re: Undocumented Solaris Mode option
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/8839450/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/8839451/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/8839452/ProcStatus.txt -- Undocumented Solaris Mode option https://bugs.launchpad.net/bugs/132672 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 102807] Re: fullscreen/wine bug
There are are also a lot of old proprietary programs that need this. For instance old programs statically linked against FTLK need these workarounds, as they set fullscreen by just making the window the size of the desktop, and setting its position to 0,0 (this was long long before the window manager hints existed obviously). Without the workarounds, they get positioned to not overlap panels instead. -- fullscreen/wine bug https://bugs.launchpad.net/bugs/102807 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 132191] installs unuseable desktop file to bzr commit-notify
Public bug reported: Binary package hint: bzr-gtk bzr-gtk supplies the file bzr-notify.desktop with an exec command of bzr commit-notify However this command doesnt exist, at least in bzr-gtk and its dependencies. Running it produces: bzr: ERROR: unknown command commit-notify This is on gutsy updated as of filing this report ** Affects: bzr-gtk (Ubuntu) Importance: Undecided Status: New -- installs unuseable desktop file to bzr commit-notify https://bugs.launchpad.net/bugs/132191 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 130653] urls are parsed incorrectly if they contain brackets
Public bug reported: Binary package hint: xchat-gnome In the main chat window, urls are noticed so you an right click and open in a browser, however urls with ( or ) in get parsed incorrecty, for instance (actually quite common with wikipedia urls): http://en.wikipedia.org/wiki/Screwdriver_(cocktail) gets parsed to be: http://en.wikipedia.org/wiki/Screwdriver_ My assumption would be there are other characters that the same thing happens with, but im not savvy enough on the url rfc to know what should and shouldnt be valid. ProblemType: Bug Architecture: i386 Date: Mon Aug 6 14:45:53 2007 DistroRelease: Ubuntu 7.10 ExecutablePath: /usr/bin/xchat-gnome NonfreeKernelModules: nvidia Package: xchat-gnome 1:0.18-0ubuntu1 PackageArchitecture: i386 ProcCmdline: xchat-gnome ProcCwd: /home/tom ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: xchat-gnome Uname: Linux vader 2.6.22-9-generic #1 SMP Fri Aug 3 00:50:37 GMT 2007 i686 GNU/Linux ** Affects: xchat-gnome (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- urls are parsed incorrectly if they contain brackets https://bugs.launchpad.net/bugs/130653 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 130653] Re: urls are parsed incorrectly if they contain brackets
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/8706375/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/8706376/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/8706377/ProcStatus.txt -- urls are parsed incorrectly if they contain brackets https://bugs.launchpad.net/bugs/130653 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 130490] Re: No usb disks at all mount [gutsy]
I did some removal of various hal/udev config files, and reinstalled those packages and it seems to be working again. I had never edited any of that stuff by hand, so my guess would be its either some cruft left over from another package, that wasnt removed by apt, or something in /etc/hal/policy isnt being forcibly updated correctly. ** Also affects: hal (Ubuntu) Importance: Undecided Status: New -- No usb disks at all mount [gutsy] https://bugs.launchpad.net/bugs/130490 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 130490] No usb disks at all mount [gutsy]
Public bug reported: Binary package hint: gnome-mount This seems to be a different problem to #121203 as i cant even mount things through nautilus. I dont quite know which bit of the stack (gnome-mount/hal/udev/whatever other bits are involved) this could be from, so im filling here in the hope it will be pushed to the correct package if its a gnome-mount bug. It affects both my usb key, and my ipod, as well as my n770, essentially every usb disk i have to try, and all of which have worked in the past, including on earlier versions of gutsy. Pluggin devices in does nothing at all, nothing comes up on screen, nothing in Places-Computer. However lsub always shows the device. With my usb key in: lsusb: Bus 007 Device 006: ID 4146:ba01 USBest Technology Intuix Flash Drive gmount -vbd /dev/sdb1 (it also pops up a dialog saying i dont have permission to mount): gnome-mount 0.6 ** (gnome-mount:9128): DEBUG: Mounting /org/freedesktop/Hal/devices/volume_uuid_46AE_5793 ** (gnome-mount:9128): DEBUG: read default option 'shortname=mixed' from gconf strlist key /system/storage/default_options/vfat/mount_options ** (gnome-mount:9128): DEBUG: read default option 'uid=' from gconf strlist key /system/storage/default_options/vfat/mount_options ** (gnome-mount:9128): DEBUG: read default option 'utf8' from gconf strlist key /system/storage/default_options/vfat/mount_options ** (gnome-mount:9128): DEBUG: read default option 'umask=077' from gconf strlist key /system/storage/default_options/vfat/mount_options ** (gnome-mount:9128): DEBUG: read default option 'exec' from gconf strlist key /system/storage/default_options/vfat/mount_options ** (gnome-mount:9128): DEBUG: Mounting /org/freedesktop/Hal/devices/volume_uuid_46AE_5793 with mount_point='256M Key', fstype='', num_options=5 ** (gnome-mount:9128): DEBUG: option='shortname=mixed' ** (gnome-mount:9128): DEBUG: option='uid=1000' ** (gnome-mount:9128): DEBUG: option='utf8' ** (gnome-mount:9128): DEBUG: option='umask=077' ** (gnome-mount:9128): DEBUG: option='exec' ** (gnome-mount:9128): WARNING **: Mount failed for /org/freedesktop/Hal/devices/volume_uuid_46AE_5793 org.freedesktop.Hal.Device.Volume.PermissionDenied : Device has /dev/sdb1 volume.ignore set to TRUE. Refusing to mount. However, the permisiions on /dev/sdb1 are: brw-rw 1 root plugdev 8, 17 2007-08-05 15:47 /dev/sdb1 And im in the plugdev group as shown by 'groups' (username is tom): tom adm dialout cdrom floppy audio dip video plugdev netdev lpadmin powerdev scanner admin If you need any more info just ask, and ill post more. ** Affects: gnome-mount (Ubuntu) Importance: Undecided Status: New -- No usb disks at all mount [gutsy] https://bugs.launchpad.net/bugs/130490 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 106739] Re: Tag editing in rhythmbox strips all tags completely
I've spent a good few hours testing tagging with multiple and single files with the latest rhythmbox in gutsy. I have a collection of about 1300 songs, in various formats including mp3 and ogg. I've retagged at least on field on every song in my collection, and the new tags are loaded fine by other programs too. In no case of multiple editing a single tag (i.e changing the genre of a whole artist over multiple albums) did i get any problems at all. ** Changed in: rhythmbox (Ubuntu) Status: Confirmed = Fix Released -- Tag editing in rhythmbox strips all tags completely https://bugs.launchpad.net/bugs/106739 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 119213] Re: Icons in GNOME Panel 2.18.1 change order
Adding some more info, mine was closed as a duplicate and didnt realise you needed more. The problem i am having is that right justified panel applets are rearaning order on login sometimes, the worst two offenders being the clock and notification applets swapping, and the waste bin/workspace switcher swapping. This is without desktop effects enabled, so even though that is mentioned in the first report i dont thing that matter. Also, this only started happening on a gutsy upgrade. On some logins, they are displayed in the correct order, and other times not. Attached a screen shot of the trash/workspace switcher being the wrong way (by default the trash icon is on the right, with the workspace switcher on the left, in this instance they have swapped for no reason). ** Attachment added: Screenshot.png http://launchpadlibrarian.net/8642189/Screenshot.png -- Icons in GNOME Panel 2.18.1 change order https://bugs.launchpad.net/bugs/119213 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 119213] Re: Icons in GNOME Panel 2.18.1 change order
Reoppening as per Pedros instructions after adding more info in previous comment ** Changed in: gnome-panel (Ubuntu) Status: Invalid = Confirmed -- Icons in GNOME Panel 2.18.1 change order https://bugs.launchpad.net/bugs/119213 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 119213] Re: Icons in GNOME Panel 2.18.1 change order
Just to be more thorough, i have a desktop running at 3360x1050 on a dual screen twinview setup, with the primary monitor as the right and secondary on the left (the panels show on the primary monitor). -- Icons in GNOME Panel 2.18.1 change order https://bugs.launchpad.net/bugs/119213 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 128734] panel applets are in different places when i login
Public bug reported: Binary package hint: gnome-panel Basically, since upgrading to gutsy, my gnome applets move aroudn on login. i.e often the clock and notification applets will swap position, or the trash and window list. I have a dual screen setup, with the gnome panels on the first screen. Oddly, i can change resolution frequently and the order is maintained, its purely when i log in, and seems to only afffect applets that are alligned to the right of a panel. ProblemType: Bug Architecture: i386 Date: Fri Jul 27 16:49:27 2007 DistroRelease: Ubuntu 7.10 ExecutablePath: /usr/bin/gnome-panel NonfreeKernelModules: nvidia Package: gnome-panel 1:2.19.5-0ubuntu3 PackageArchitecture: i386 ProcCmdline: gnome-panel --sm-client-id default1 ProcCwd: /home/tom ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: gnome-panel Uname: Linux vader 2.6.22-8-generic #1 SMP Thu Jul 12 15:59:45 GMT 2007 i686 GNU/Linux ** Affects: gnome-panel (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- panel applets are in different places when i login https://bugs.launchpad.net/bugs/128734 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 128734] Re: panel applets are in different places when i login
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/8584374/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/8584375/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/8584376/ProcStatus.txt -- panel applets are in different places when i login https://bugs.launchpad.net/bugs/128734 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 128734] Re: panel applets are in different places when i login
*** This bug is a duplicate of bug 119213 *** https://bugs.launchpad.net/bugs/119213 Ahh sorry, i did try to find a duplicate but couldnt, my bad. On 7/27/07, Sebastien Bacher [EMAIL PROTECTED] wrote: *** This bug is a duplicate of bug 119213 *** https://bugs.launchpad.net/bugs/119213 ** This bug has been marked a duplicate of bug 119213 Icons in GNOME Panel 2.18.1 change order -- panel applets are in different places when i login https://bugs.launchpad.net/bugs/128734 You received this bug notification because you are a direct subscriber of the bug. -- panel applets are in different places when i login https://bugs.launchpad.net/bugs/128734 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 127060] Fails to start with mcop error
Public bug reported: Fresh install of zsnes, running on plain ubuntu desktop. Fails with the error (when run from console): Creating link /home/tom/.kde/socket-vader. can't create mcop directory However, after running a kde app (in this case kmplot) i was then able to start zsnes ok. I did already have an existing .kde directory. If you need more info, ill be glad to do what i can to provide it. ** Affects: zsnes (Ubuntu) Importance: Undecided Status: New -- Fails to start with mcop error https://bugs.launchpad.net/bugs/127060 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 127060] Re: Fails to start with mcop error
Apologies, forgot to mention this is on Gutsy, fully updated as of 21:00 gmt on 18/7/2007 -- Fails to start with mcop error https://bugs.launchpad.net/bugs/127060 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 126057] Switching visualisation screen in fullscreen mode doesnt work correctly
Public bug reported: Binary package hint: rhythmbox I have a two screen setup. When using the visualtion plugin, there is a little combo box for picking which screen to appear on (i dont know whether this exists or not on a single screen setup). Having the visualisation running in fullscreen, and then switching the option to change screens doesnt work correctly. There are at least 2 ways it fails, on switch on my setup will cause the window to move to the correct screen, but it wont be fullscreen, and the visualistaion becomes invisible. Switching the other way just causes nothing to happen. However it is possible to workaround by switching to embedded mode and back to fullscreen. ProblemType: Bug Architecture: i386 Date: Sat Jul 14 23:10:30 2007 DistroRelease: Ubuntu 7.10 ExecutablePath: /usr/bin/rhythmbox NonfreeKernelModules: nvidia Package: rhythmbox 0.11.1-0ubuntu2 PackageArchitecture: i386 ProcCmdline: rhythmbox ProcCwd: /home/tom ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: rhythmbox Uname: Linux vader 2.6.22-7-generic #1 SMP Mon Jun 25 17:33:14 GMT 2007 i686 GNU/Linux ** Affects: rhythmbox (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- Switching visualisation screen in fullscreen mode doesnt work correctly https://bugs.launchpad.net/bugs/126057 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 126057] Re: Switching visualisation screen in fullscreen mode doesnt work correctly
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/8482894/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/8482895/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/8482896/ProcStatus.txt -- Switching visualisation screen in fullscreen mode doesnt work correctly https://bugs.launchpad.net/bugs/126057 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 35836] Re: Hold packages
It is possible to pin package versions, but its not in update-manager (many package functions are not, its a really simple update tool). As far as gui support for this feature goes, synaptic is capable of doing this (Package-Lock Version). -- Hold packages https://bugs.launchpad.net/bugs/35836 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 88638] Re: [apport] pitivi crashed with Error in setlocale()
I just installed the package from feisty, it seems to be working ok now. Thanks -- [apport] pitivi crashed with Error in setlocale() https://bugs.launchpad.net/bugs/88638 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 94767] x11-common conflicts with xephem
Public bug reported: Binary package hint: xorg Why is this? As far as i'm aware no version of ubuntu has ever included a packaged xephem (i believe the license prohibits this, but iamnal). This means i can not install a package of xephem i have prepared myself, which in fact i used to use fine on an ubuntu edgy install. If there is no justification for the conflict, then i request it be removed, or made to conflict with a version = whatever has been supplied in the past that requires this conflict if my previous asserstion is incorrect. My assumption would be this was added to deal with broken upgrades from someone who has manually installed the debian (very very old version) packaged xephem, but i would assume that was indirectly due to a dependcy on a motif library, probably lesstif1 as ubuntu feisty only supplies lesstif2 FYI thi is on x11-common 1:7.2-0ubuntu8 on feisty Thanks, feel free to contact me if you need anymore information, access to my xephem package source etc (although again my understanding of the license makes this appear prohibited) ** Affects: xorg (Ubuntu) Importance: Undecided Status: Unconfirmed -- x11-common conflicts with xephem https://launchpad.net/bugs/94767 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 88638] [apport] pitivi crashed with Error in setlocale()
Public bug reported: Binary package hint: pitivi I know there are already other bugs about pitvi not starting, this seems to be a different trace to the X window system error however. ProblemType: Crash Architecture: all Date: Wed Feb 28 12:41:17 2007 DistroRelease: Ubuntu 7.04 ExecutablePath: /usr/bin/pitivi InterpreterPath: /usr/bin/python2.5 Package: pitivi 0.10.2-1 ProcCmdline: python /usr/bin/pitivi ProcCwd: /home/tom ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games LANG=en_GB.UTF-8 SHELL=/bin/bash PythonArgs: ['/usr/bin/pitivi'] SourcePackage: pitivi Uname: Linux vader 2.6.20-9-generic #2 SMP Mon Feb 26 03:01:44 UTC 2007 i686 GNU/Linux ** Affects: pitivi (Ubuntu) Importance: Undecided Status: Unconfirmed -- [apport] pitivi crashed with Error in setlocale() https://launchpad.net/bugs/88638 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 88638] Re: [apport] pitivi crashed with Error in setlocale()
** Attachment added: Dependencies.txt http://librarian.launchpad.net/6565723/Dependencies.txt ** Attachment added: ProcMaps.txt http://librarian.launchpad.net/6565724/ProcMaps.txt ** Attachment added: ProcStatus.txt http://librarian.launchpad.net/6565725/ProcStatus.txt ** Attachment added: Traceback.txt http://librarian.launchpad.net/6565726/Traceback.txt -- [apport] pitivi crashed with Error in setlocale() https://launchpad.net/bugs/88638 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs