date:20071029

Nice timing.

  status invalid


** Changed in: gxine (Ubuntu)
   Status: Incomplete => Invalid

-- 
video flickers 
https://bugs.launchpad.net/bugs/66045
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158486] Re: Nautilus - ntfs to fat32 file transfer completes successfully, but files are gone after restart.

2007-10-29 Thread dAniel hAhler

I suppose you've looked at the external hard drive after installation from 
Ubuntu? Have you tried looking at it from Windows (if available)?
Have you tried using the Live CD again to see if you can access the files from 
there - instead of using the installed system?

Whatever you do, you should avoid/prevent any write accesses to the
device, so that the files may get undeleted again (unless they do not
get overwritten).

You can try "du -sch /mnt/usbhdd/*" from a terminal to see which folders
occupy how much space (where /mnt/usbhdd is the mount point of the
device). Maybe it's just in another subfolder?

(I've queried you on IRC - you may want to reply there)

** Changed in: ubuntu
 Assignee: (unassigned) => dAniel hAhler (blueyed)
   Status: New => Incomplete

-- 
Nautilus - ntfs to fat32 file transfer completes successfully, but files are 
gone after restart.
https://bugs.launchpad.net/bugs/158486
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 8497] Re: grub guessed BIOS disk order incorrectly

2007-10-29 Thread richard

This is STILL an issue in GUTSY and can create an UN-BOOTABLE SYSTEM
that's very difficult to debug.

Ubuntu (or grub) simply doesn't have the same idea of disk ordering as
the BIOS.

In particular this is what just happened to me with a new Gutsy install.

After installation and reboot the computer just said "Grub stage 1.5"
and "Error 15". That error apparently means it couldn't parse a number,
which is pretty much a useless error.

After spending about 2 hours on the problem, I realised that grub had
installed itself on hd0, according to Ubuntu, but actually the second
disk according to the BIOS. The computer was happy to boot from the
second disk, but when grub then ran I can only assume it thought it was
on the first disk and subsequently read information from that disk which
didn't have the grub-stuff installed. And it broke.

I made it all work by physically shifting the disk connections around to
make the boot disk was the first in the BIOS sequence (but detected as
*hd2* by Ubuntu) and reinstalling (just to be sure).

-- 
grub guessed BIOS disk order incorrectly
https://bugs.launchpad.net/bugs/8497
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158493] Tulip Graph Visualizer/libqtsql undefined symbol

2007-10-29 Thread pheh

Public bug reported:

Binary package hint: tulip

[EMAIL PROTECTED]:~$ tulip
tulip: symbol lookup error: /usr/lib/libQtSql.so.4: undefined symbol: 
_ZN14QObjectPrivate15checkWindowRoleEv

** Affects: tulip (Ubuntu)
 Importance: Undecided
 Status: New

-- 
Tulip Graph Visualizer/libqtsql undefined symbol
https://bugs.launchpad.net/bugs/158493
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 46055] Re: Natural named range not updated

2007-10-29 Thread Bert Vorenholt

Oops... this seems not to be a bug, but a feature :-(

Searching the OOo Calc forum topic, i saw the next solution:

http://www.oooforum.org/forum/viewtopic.phtml?t=59440  (answer on
question)


JohnV
Administrator

Joined: 07 Mar 2003
Posts: 4810
Location: Kentucky, USA

Posted: Sun Jul 08, 2007 12:25 pmPost subject:  
Try Tools > Options > Calc > General
>From Help:
Quote:  
Expand references when new columns/rows are inserted
Specifies whether to expand references when inserting columns or rows adjacent 
to the reference range. This is only possible if the reference range, where the 
column or row is inserted, originally spanned at least two cells in the desired 
direction.
Example: If the range A1:B1 is referenced in a formula and you insert a new 
column after column B, the reference is expanded to A1:C1. If the range A1:B1 
is referenced and a new row is inserted under row 1, the reference is not 
expanded, since there is only a single cell in the vertical direction.
If you insert rows or columns in the middle of a reference area, the reference 
is always expanded.  



I've tried this option and now my inserts are behaving as espected :-)

Hope this helps other people.

P.S.: I think this should be set by default

-- 
Natural named range not updated
https://bugs.launchpad.net/bugs/46055
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 141516] Re: Gparted crashes reloading devices

2007-10-29 Thread tdreyer1

I get similar error:

 [EMAIL PROTECTED]:~$ sudo gparted
 [sudo] password for tdreyer1:
 ==
 libparted : 1.7.1
 ==
 Unable to open /dev/sdd - unrecognised disk label.
 Unable to open /dev/sdd - unrecognised disk label.
 Segmentation fault (core dumped)
 [EMAIL PROTECTED]:~$

The errors happen after an apparently successful deletion & reformat of
a USB drive (ipod 5g 30gb video). Crashes as soon as "ok" is clicked.

-- 
Gparted crashes reloading devices
https://bugs.launchpad.net/bugs/141516
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158491] Re: Icons are the sames in all the workareas when changes this

2007-10-29 Thread ivancete


** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/10210123/Dependencies.txt

** Attachment added: "ProcMaps.txt"
   http://launchpadlibrarian.net/10210125/ProcMaps.txt

** Attachment added: "ProcStatus.txt"
   http://launchpadlibrarian.net/10210126/ProcStatus.txt

-- 
Icons are the sames in all the workareas when changes this
https://bugs.launchpad.net/bugs/158491
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158491] Icons are the sames in all the workareas when changes this

2007-10-29 Thread ivancete

Public bug reported:

Binary package hint: gnome-panel

7.04: The icons in the other desktops don't disappear when I change the
work area, and are the sames in the other desktop. This shouldn't
occurred because sometimes the icons disappear correctly.  What Happen?

ProblemType: Bug
Architecture: i386
Date: Mon Oct 29 20:42:04 2007
DistroRelease: Ubuntu 7.04
ExecutablePath: /usr/bin/gnome-panel
Package: gnome-panel 1:2.18.1-0ubuntu3.1
PackageArchitecture: i386
ProcCmdline: gnome-panel --sm-client-id default1
ProcCwd: /home/ivan
ProcEnviron:
 LANGUAGE=es_AR:es
 PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
 LANG=es_AR.UTF-8
 SHELL=/bin/bash
SourcePackage: gnome-panel
Uname: Linux lemos-desktop 2.6.20-16-generic #2 SMP Sun Sep 23 19:50:39 UTC 
2007 i686 GNU/Linux

** Affects: gnome-panel (Ubuntu)
 Importance: Undecided
 Status: New

-- 
Icons are the sames in all the workareas when changes this
https://bugs.launchpad.net/bugs/158491
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158490] Pentium D Install Shows Single Core

2007-10-29 Thread Aron Schatz

Public bug reported:

This happened on both 7.04 and 7.10 Kubuntu.

If I run my computer with the Live CD, /proc/cpuinfo shows the correct
core information. When the system gets installed, /proc/cpuinfo shows
this...

processor   : 0
vendor_id   : GenuineIntel
cpu family  : 15
model   : 4
model name  : Intel(R) Pentium(R) D CPU 3.00GHz
stepping: 4
cpu MHz : 3000.404
cache size  : 1024 KB
physical id : 0
siblings: 1
core id : 0
cpu cores   : 1
fdiv_bug: no
hlt_bug : no
f00f_bug: no
coma_bug: no
fpu : yes
fpu_exception   : yes
cpuid level : 5
wp  : yes
flags   : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov 
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc up 
pni monitor ds_cpl est cid cx16 xtpr
bogomips: 6005.88
clflush size: 64

This is uname -a: Linux aseremote 2.6.22-14-generic #1 SMP Sun Oct 14
23:05:12 GMT 2007 i686 GNU/Linux

I'm running a SMP kernel, but the system only sees one core. Why it
works with a Live CD and not installed is weird.

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
Pentium D Install Shows Single Core
https://bugs.launchpad.net/bugs/158490
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 26419] Re: gnome-session hangs when "lo" is not correctly configured

2007-10-29 Thread kailden

I had a similar problem (upon upgrade from feisty to gutsy) and I think it was 
a problem with gnome-power-manager.
When I ran gnome-power-manager in a terminal, it couldn't find 
/usr/lib/libwnck-1.so-18.

I made a symbolic link as follows:

sudo ln -s /usr/lib/libwnck-1.so.22 /usr/lib/libwnck-1.so.18

and made sure that gnome-power-manager was running in my gnome session,

(System->Preferences->Sessions  and check Power Manager)

and now there is no hang.

-- 
gnome-session hangs when "lo" is not correctly configured
https://bugs.launchpad.net/bugs/26419
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 32963] Re: totem overrides XV_CONSTRAST to wrong default value (Xv movies on i810/i945 have horrible colour/gamma)

Responding to comment from Vytas: "For a new user in Gutsy, it works fine.
But for one who has upgraded, it won't. Because normal saturation is now 1/8, 
normal contrast 1/4. Totem "restore defaults" button moves all values to 1/2 
producing very artistic results.".

I'm using an upgraded-to-Gutsy, on a laptop with 945GM.

I'm seeing that before "Restore defaults", Totem sets my contrast to the
most negative value (i.e. slider in the left position), and that makes
the picture all blues and reds.  "Restore defaults" actually makes the
picture much better, though still not quite right.

-- 
totem overrides XV_CONSTRAST to wrong default value (Xv movies on i810/i945 
have horrible colour/gamma)
https://bugs.launchpad.net/bugs/32963
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 32963] Re: totem overrides XV_CONSTRAST to wrong default value (Xv movies on i810/i945 have horrible colour/gamma)

I see similar problems with Gutsy's driver. However, my image isn't
"too white". There is no white at all: it's all blue and red
combinations.

I didn't know about xvattr and so on, and it's annoying that Totem has
no controls (that I could find) to adjust any of the
brightness/contrast/saturation values, and the control to turn of Xv
output is rather obscurely hidden in a different program (so I didn't
find it).

So I tried other video players. Xine looked similar, but slightly
better. Still all blues and reds but with a hint of green. Turning off
Xv fixed it.

mplayer had slightly more green, yet still with the same problem.
Turning off Xv fixed it (unsurprising by now).

Isn't it odd that Totem/Xine/mplayer all looked different, despite
having the same problem. (Note that I always tried Totem first).

Eventually I found that the Xv Contrast control was set to its most
negative value. By changing this in mplayer to a low-to-middle value,
the picture was fixed.

Curiously, I am now using this driver, and Totem looks fine without touching
any Xv settings:
http://people.ubuntu.com/~bryce/Testing/intel/xserver-xorg-video-intel_2.1.1~git20071004-0ubuntu1_i386.deb

But I also notice that Contrast is still set to that most negative
value, but now changing any of the controls doesn't have any effect on
the picture, in any video player (using Xv).

--
totem overrides XV_CONSTRAST to wrong default value (Xv movies on i810/i945
have horrible colour/gamma)
https://bugs.launchpad.net/bugs/32963
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 80535] Re: Loud beep when installing feisty-desktop-i386 on DQ965COEKR motherboard

2007-10-29 Thread Risto H. Kurppa

Confirmed on Gutsy stable (updated from Feisty),  installed on a HP
XE3-gc -laptop. (i386)

It starts to make the noise pretty early on the startup (during splash).

I removed 'splash' from grub, it started it only in the login screen.
Then stopped, and started, stopped and started again and kept making the
noise all the way.

When shutting down, it stops when around 75% of the shutdown is done
(the progress bar).

Restarted once again, put acpi=force, sound's gone and everything
works..

weird.. Hope this helps you. The laptop is not mine, I don't have proper
access to it so I might have some difficulties to provide more
information dmesg attached from a run where it made the noise.


** Attachment added: "dmesg.txt"
   http://launchpadlibrarian.net/10210064/dmesg.txt

-- 
Loud beep when installing feisty-desktop-i386 on DQ965COEKR motherboard
https://bugs.launchpad.net/bugs/80535
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 124773] Re: fsck freezes on laptop

2007-10-29 Thread Theodore Ts'o

Hi Bryce,

It's very likely your problem is different from the problems reported by
people pre-e2fsprogs 1.40.

Please refer to the section REPORTING BUGS in the e2fsck man page.  In
particular, what would be most helpful is the output of dumpe2fs and a
compressed raw e2image snapshot of your filesystem.  i.e., replacing
/dev/hda1 with your device, something like this:

e2image -r /dev/hda1 - | bzip2 > hda1.e2i.bz2

Please note the privacy implications of this command as documented in
the e2image man page before making it available in a public location
such as using a launchpad attachment.   In particular, a raw e2image
file will expose the names of the files in your filesystem, although not
the content of the files themselves.  Hence, if you have any files with
names such as "ch1ld pr0n" or "secr1t Al Quaeda attack plans" or even
"letter to my mistress" :-), please make sure you understand what
information you are making available when you send me such a file.  If
you want to send me private e-mail with download information, I will
honor any confidentiality request you might make of me, and I won't look
at any filename information except as might become available as I am
debugging your problem.

Best regards,

-- 
fsck freezes on laptop
https://bugs.launchpad.net/bugs/124773
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 129616] Re: apport-gtk crashed with IOError in _read_gzip_header()

2007-10-29 Thread Rijkhart

Hello Martin, is this what you are looking  for,
if  not give me some newbe instructions so i can learn to be helpfull
Rijkhart 

ProblemType: Crash
ApportLog:
 
Architecture: i386
CrashReports:
 600:1000:1000:8595951:2007-09-27 19:28:14.0 +0200:2007-09-29
 01:55:52.0
 +0200:/var/crash/_usr_lib_realplay-10.0.9_realplay.bin.1000.crash
 600:1000:1000:26206:2007-09-29 01:56:08.0 +0200:2007-09-29
 01:56:11.0
 +0200:/var/crash/_usr_share_apport_apport-gtk.1000.crash
Date: Sat Sep 29 01:56:09 2007
DistroRelease: Ubuntu 7.10
ExecutablePath: /usr/share/apport/apport-gtk
InterpreterPath: /usr/bin/python2.5
Package: apport-gtk 0.97
PackageArchitecture: all
ProcCmdline: /usr/bin/python /usr/share/apport/apport-gtk
ProcCwd: /home/rijkhart
ProcEnviron:

 PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
 LANG=sv_SE.UTF-8
 SHELL=/bin/bash
PythonArgs: ['/usr/share/apport/apport-gtk']
SourcePackage: apport
Title: apport-gtk crashed with IOError in _read_gzip_header()
Uname: Linux gershwin 2.6.22-12-generic #1 SMP Sun Sep 23 18:11:30 GMT
 2007 i686 GNU/Linux
 
Rijkhart Theissen 
[EMAIL PROTECTED]
  [EMAIL PROTECTED]
   [EMAIL PROTECTED]
 
   +46 8 554 30207
   +46 70 303 3007

- Original Message 
From: Martin Pitt <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Sunday, October 28, 2007 8:56:22 PM
Subject: [Bug 129616] Re: apport-gtk crashed with IOError in _read_gzip_header()

Thank you for your reports. Does someone still have a report in
/var/crash which reproduces this apport crash? (You can click on it in
nautilus). If so, please attach the original report here, so that I can
reproduce the apport crash.

** Changed in: apport (Ubuntu)
   Status: New => Incomplete

** Visibility changed to: Public

-- 
apport-gtk crashed with IOError in _read_gzip_header()
https://bugs.launchpad.net/bugs/129616
You received this bug notification because you are a direct subscriber
of a duplicate bug.




  ___
Sök efter kärleken!
Hitta din tvillingsjäl på Yahoo! Dejting: http://se.meetic.yahoo.net

-- 
apport-gtk crashed with IOError in _read_gzip_header()
https://bugs.launchpad.net/bugs/129616
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158487] A way to delete finished jobs needed

2007-10-29 Thread zerwas

Public bug reported:

Binary package hint: system-config-printer

For Ubuntu 7.10 there is a way needed to delete finished jobs in system-
config-printer --no-tray-icon under "View" -> "Show completed jobs".
Right clicking on a job does not bring an option to remove it.

At the moment it is needed to do 3 complicated steps for beginners:

sudo /etc/init.d/cupsys stop
sudo rm /var/cache/cups/job.cache
sudo /etc/init.d/cupsys start

Thanks for reading this.

** Affects: system-config-printer (Ubuntu)
 Importance: Undecided
 Status: New

-- 
A way to delete finished jobs needed
https://bugs.launchpad.net/bugs/158487
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 93964] Re: Malicious program run as user can compromise system

2007-10-29 Thread Brian Visel

Example exploit had a bug in it that I just noticed.. ..one year later,
almost..  feh.  anywho, this is the example repaired.  It's
uncomfortably simple.  Security will need some work as Ubuntu grows.

Perhaps we could make a "Desktop User" who can (gk)su to do only
specific tasks, such as some or all the programs that are in the
system/administration menu, but to disallow running of other
executables.  This won't prevent a malicious .deb from being installed,
but it will go a long way in fighting simple exploits without getting in
(most) users' way.

How/where would I get involved in helping to fix this (I don't need a
whole explanation, I can read documentation, I just mean -- what package
crew, etc?)


** Attachment added: "An exploit that rather easily allows someone to grab 
root."
   http://launchpadlibrarian.net/10210058/Root_Access.sh

-- 
Malicious program run as user can compromise system
https://bugs.launchpad.net/bugs/93964
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 66045] Re: video flickers

2007-10-29 Thread drberg1000

Couldn't tell you.  I'm not running Ubuntu any more, nor do I have the
system this was a problem on.The bug can be closed.

-- 
video flickers 
https://bugs.launchpad.net/bugs/66045
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 66045] Re: video flickers

** Changed in: gxine (Ubuntu)
   Status: New => Incomplete

-- 
video flickers 
https://bugs.launchpad.net/bugs/66045
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 144957] Re: KDE Human and Tangerine icons not complete

2007-10-29 Thread Ryiden

There are also missing icons in K3b

** Attachment added: "Missing icons in K3b"
   http://launchpadlibrarian.net/10210040/Human.png

-- 
KDE Human and Tangerine icons not complete
https://bugs.launchpad.net/bugs/144957
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 128662] Re: pidgin otr dual buttons appear randomly

2007-10-29 Thread Felix Geyer

Sorry, it has already been synced. It's just not compiled yet.

** Changed in: pidgin-otr (Ubuntu)
   Status: New => Fix Committed

-- 
pidgin otr dual buttons appear randomly
https://bugs.launchpad.net/bugs/128662
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158485] Re: X server fatal error with mga driver using overlay 8+24

2007-10-29 Thread gumshoes


** Attachment added: "Xorg.0.log"
   http://launchpadlibrarian.net/10210059/Xorg.0.log

-- 
 X server fatal error with mga driver using overlay 8+24
https://bugs.launchpad.net/bugs/158485
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158485] X server fatal error with mga driver using overlay 8+24

2007-10-29 Thread gumshoes

Public bug reported:

Binary package hint: xserver-xorg-video-mga

Environment:
Kubuntu 7.10
xserver-xorg-video-mga/gutsy uptodate 1:1.4.6.1.dfsg.1-3
(--) PCI:*(3:0:0) Matrox Graphics, Inc. MGA G400/G450 rev 133

Problem:
The mga driver works fine in 8 and 24 bit modes until the overlay option is 
enabled in the device section, example:

Option "Overlay" "24,8"

Once enabled X will no longer start, some lines from Xorg.0.log:

(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.2
(--) MGA(0): Chipset: "mgag400" (G450)
(**) MGA(0): Depth 24, (--) framebuffer bpp 32
(==) MGA(0): RGB weight 888
(**) MGA(0): Option "Overlay" "24,8"
(==) MGA(0): Using AGP 1x mode
(==) MGA(0): Using XAA acceleration
(**) MGA(0): PseudoColor overlay enabled
...
(II) MGA(3): YDstOrg is set to 0
(II) Loading sub module "xf8_32bpp"
(II) LoadModule: "xf8_32bpp"
(II) Loading /usr/lib/xorg/modules//libxf8_32bpp.so
dlopen: /usr/lib/xorg/modules//libxf8_32bpp.so: undefined symbol: mfbPushPixels
(EE) Failed to load /usr/lib/xorg/modules//libxf8_32bpp.so
(II) UnloadModule: "xf8_32bpp"
(EE) MGA: Failed to load module "xf8_32bpp" (loader failed, 7)
(II) UnloadModule: "mga"
(II) UnloadModule: "vgahw"
(II) UnloadModule: "mga"
(II) UnloadModule: "int10"
(II) UnloadModule: "vbe"
(II) UnloadModule: "int10"
(II) UnloadModule: "vgahw"
(II) UnloadModule: "mga"
(II) UnloadModule: "int10"
(II) UnloadModule: "vbe"
(II) UnloadModule: "int10"
(II) UnloadModule: "vgahw"
(II) UnloadModule: "mga"
(II) UnloadModule: "int10"
(II) UnloadModule: "vbe"
(II) Unloading /usr/lib/xorg/modules//libvbe.so
(II) UnloadModule: "int10"
(II) Unloading /usr/lib/xorg/modules//libint10.so
(II) UnloadModule: "vgahw"
(II) Unloading /usr/lib/xorg/modules//libvgahw.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Notes:
Overlay works on the same machine with an older RedHat build.
A similar problem seems to have been encountered and fixed in Mandriva: 
http://www.nabble.com/-Bug-21132---xorg-x11--RESOLVED:-X-server-fatal-error-with-mga-driver-using-overlay-8+24-t2196880.html

** Affects: xserver-xorg-video-mga (Ubuntu)
 Importance: Undecided
 Status: New

-- 
 X server fatal error with mga driver using overlay 8+24
https://bugs.launchpad.net/bugs/158485
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158486] Nautilus - ntfs to fat32 file transfer completes successfully, but files are gone after restart.

2007-10-29 Thread Lonnie

Public bug reported:

Nautilus tricked me!

I've just migrated a friend from XP to Ubuntu, and so far, it seems that
I've lost all his files during the migration. I haven't told him the bad
news yet. Please help.

Before migrating a Windows XP machine to Ubuntu 7.10, I used the live CD
to move files from XP's NTFS file system to a 500gig USB external hard
drive with a fat32 file system.

After the 80+ gig file transfer completed, I used nautilus to navigated
the external hard drive and (seemingly) confirmed that the files were
indeed transfered; they were showing up in nautilus.

Next, while still using the 7.10 live CD, I unmounted the external HD by
right-clicking (on its desktop icon representation) and selecting
"unmount volume".

A dialog box popped up that asked me if I wanted to empty trash on the
volume I was unmounting. I selected the "empty trash" button.

After installation, I returned to the external hard drive and all the
files I copied were missing! The only files missing were the files I
copied there using Nautilus with the Ubuntu 7.10 live cd.

>From the command line, using ls -a, I'm still unable to locate the
folder I created for the migration.

Doesn't anyone understand what went wrong here. Does anyone have
suggestions on recovering this missing migration folder that contains
all my friend folders and files?

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
Nautilus - ntfs to fat32 file transfer completes successfully, but files are 
gone after restart.
https://bugs.launchpad.net/bugs/158486
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 85751] Re: Distorted MP3 sound

On Mon, 2007-10-29 at 23:07 +, Fabio Ornellas wrote:
> May be Debian already forces a working codec for MP3 or they have applied
> the patch from CVS to fix the bug. As reported, it will be fixed on Ubuntu
> 8.04 (am I right?). Nothing for Gutsy though.

Kubuntu shares the same packages as Ubuntu, so what Debian has done will
make no difference between the two. I suspect it's due to differing
audio drivers, or perhaps just general mplayer {crazi,random}ness.

Debian fixed this by going to 1.0rc2, as we will for Hardy (ie. 8.04
LTS)

-- 
Distorted MP3 sound
https://bugs.launchpad.net/bugs/85751
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158472] Re: Firefox crashes after file upload

2007-10-29 Thread sbsbessa

the same as bug 85833

** Changed in: firefox (Ubuntu)
   Status: New => Invalid

-- 
Firefox crashes after file upload
https://bugs.launchpad.net/bugs/158472
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158483] evince mishandles duplex printing of multiple copies of PDFs with an odd number of pages.

2007-10-29 Thread zjohnson

Public bug reported:

Binary package hint: evince

First of all thank you for developing a fairly nice and intuitive
document viewer, and if this bug report is best submitted to some
subsystem project which specificly handles printing, well I'm sorry and
hope that someone can move it to the right place for me. :)


Okay so say you have an HP laserjet 4300 DN which is a duplex laser printer.

Say you have the proper PPD file for it.

Say you have a 3 (or any odd number) of pages in a PDF document

Say you want 2 copies of said document.

So you select print, and select 2 copies, and also confirm that "Page
Setup->Two-sided" is already set to "Flip on Long Edge".

What you end up with is 3 pieces of paper. Each printed on both sides.

The main problems are that the 2nd piece of paper contains page 3 on one
side, and page 1 on the other.

And the general side-y-ness is thrown off by 1 for the entire 2nd copy
of the document.

I strongly think it should make the 2nd side of the 2nd piece of paper
blank and start anew for the 2nd document. and I think most people would
agree. :)

Also if you attempt to collate in the above situation things get even
more silly. You end up with 3 pieces of paper. The first with page 1
printed on both sides and the 2nd paper with page2 on both sides, and so
on.

BTW, I also tried this on a Xerox Phaser 8550 with its own PPD and
experienced the same results.

Thank you,
Zachariah Johnson

** Affects: evince (Ubuntu)
 Importance: Undecided
 Status: New

-- 
evince mishandles duplex printing of multiple copies of PDFs with an odd number 
of pages.
https://bugs.launchpad.net/bugs/158483
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158482] Wrong Live CD resolution

2007-10-29 Thread Jose Luis

Public bug reported:

Hello there, My monitor is a SyncMaster 540N, n once I boot to get the
live session, I get a higher res, but my screen wont go beyong 1024 X
768, so I cannot see a thing, n the screen blinks, then I get "the video
has restarted 6 times in the last 90 secs" n I cannot see the live CD,
becaus eof that I cannot install Ubuntu 7.10, my Video card is an Ati
x1600 512 Mb. I have an Athlon X2 3800+ I am using 32 bit version,
because 64 bit versions do not have the same support like this.


Why the default screen res of the live session is 1600?  n why xorg is not 
detecting my appropiated screen res, I have tried ctrl + alt + f2 then pkill 
GDM, then edited the /etc/X11/xorg.conf n nothing happens. cannot start ubuntu, 
cannot install ubuntu. I using Debian etch 64, but since  getting help for this 
linux distro is a pain in the back,  I decided to move to Ubuntu bac again, for 
the support, I have been on IRC channel, but it seems that my problem, is not 
video, I think is the default screen res, is there a way to boot the live 
session wioth a lower res?

n I cant consider downloading ubuntu again. because I have low
connection, I ordered the CDs from ship it, but if those CDs are live,
then I will be doomed to be without ubuntu.


thanks in advance.
best regards

Jose

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
Wrong Live CD resolution
https://bugs.launchpad.net/bugs/158482
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158484] Gutsy: Suspend locks dvb-t output on Conexant CX23880/1/2/3 PCI Video and Audio Decoder

2007-10-29 Thread iCe

Public bug reported:

After resuming from suspend in Gutsy, there is not tv output from the
Conexant DVB-T device. The device was working correctly before the
suspend, and it resumes after a reboot.

If you try to reload the cx8802 module with modprobe -r cx8802 and then
modprobe cx8802 it doesn't load the module leaving this output in
/var/log/messages:

Oct 30 01:14:47 atlanta kernel: [99902.844000] CORE cx88[0]: subsystem: 
0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
Oct 30 01:15:08 atlanta kernel: [99924.412000] cx2388x dvb driver version 0.0.6 
loaded
Oct 30 01:15:08 atlanta kernel: [99924.412000] cx8802_register_driver() 
->registering driver type=dvb access=shared
Oct 30 01:15:08 atlanta kernel: [99924.412000] CORE cx88[0]: subsystem: 
0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
Oct 30 01:15:08 atlanta kernel: [99924.412000] cx88[0]/2: cx2388x based dvb card
Oct 30 01:15:08 atlanta kernel: [99924.412000] cx22702_readreg: readreg error 
(ret == -121)
Oct 30 01:15:08 atlanta kernel: [99924.412000] cx88[0]: frontend initialization 
failed
Oct 30 01:15:08 atlanta kernel: [99924.412000] cx8802_dvb_probe dvb_register 
failed err = -1

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
Gutsy: Suspend locks dvb-t output on  Conexant CX23880/1/2/3 PCI Video and 
Audio Decoder 
https://bugs.launchpad.net/bugs/158484
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 128662] Re: pidgin otr dual buttons appear randomly

2007-10-29 Thread Felix Geyer

Requesting a sync of pidgin-otr and libotr from Debian lenny main.

libotr (3.1.0-1):
   * New upstream release

pidgin-otr (3.1.0-1):
   * New upstream release (closes: #435055, #435836)
   * Build depend on newer libotr (closes: #430349)

-- 
pidgin otr dual buttons appear randomly
https://bugs.launchpad.net/bugs/128662
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 144892] Re: jde 2.3.5.1-2 fails to install

2007-10-29 Thread Mike Gratton

Pablo, that is bug #72402, or are you talking about something else?

-- 
jde 2.3.5.1-2 fails to install
https://bugs.launchpad.net/bugs/144892
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 150192] Re: starting X on xen kernel with nvidia module loaded causes kernel panic

2007-10-29 Thread rhalff

this seems related:
http://www.nvnews.net/vbulletin/showthread.php?t=95483 (NVIDIA Xen 3.0 Patch 
for driver 100.14.11)

-- 
starting X on xen kernel with nvidia module loaded causes kernel panic
https://bugs.launchpad.net/bugs/150192
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158001] Re: merge hydrogen 0.9.3-5 from Debian unstable

2007-10-29 Thread Emmet Hikory

** Changed in: hydrogen (Ubuntu)
   Status: Fix Committed => Fix Released

-- 
merge hydrogen 0.9.3-5 from Debian unstable
https://bugs.launchpad.net/bugs/158001
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 82108] Re: forcedeth changes MAC address after suspend/resume

2007-10-29 Thread Bernhard Schmidt

I can't really claim to fully understand C (and even more kernel code),
but as far as I understood this fix it alters behaviour on the more
recent chipsets (MCP61-73). I do have a MCP55 (see lspci in #158057), so
I think it would not change anything in the behaviour.

-- 
forcedeth changes MAC address after suspend/resume
https://bugs.launchpad.net/bugs/82108
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 91966] Re: screen artifacts after resume, part row of pixels in error (945GM)

2007-10-29 Thread Peter Maydell

>disabling DRI makes the screen artifact go away.

I'm not so sure. I've seen this corruption on my multihead
configuration, and that never has DRI enabled, because the total width
is > 2048 pixels so the Intel driver is forced to disable DRI on the 945
chipset...

-- 
screen artifacts after resume, part row of pixels in error (945GM)
https://bugs.launchpad.net/bugs/91966
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 46938] Re: Device Manager, CPU info has no informatin (unknown)

2007-10-29 Thread Miguel

I believe this should be closed. It is, indeed, a bug on the hal-device-
manager. This application is not parsing correctly parsing the output of
the hal-device. It should be easy to correct this but, since it is being
deprecated (already deleted from the git repository of freedesktop) and
replaced by gnome-device-manager, it might be discarded. Anyway, this
bug report dates from 2006 already!

-- 
Device Manager, CPU info has no informatin (unknown)
https://bugs.launchpad.net/bugs/46938
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 73278] Re: crashes on audio streaming

  status invalid


** Changed in: gxine (Ubuntu)
   Status: New => Invalid

-- 
crashes on audio streaming
https://bugs.launchpad.net/bugs/73278
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158481] IPv6 causes wireless to disconnect/reconnect often

2007-10-29 Thread tvst

Public bug reported:

Binary package hint: network-manager

I have had the following bug since Ubuntu 6.10:

- I connect to a wireless network with Network Manager (doesn't matter whether 
it's hidden or has any type of encryption)
- After a few minutes my connection goes down (usually around 10-30 minutes)
- I can immediately see nm-applet trying to reconnect or connect to another 
network

My computer is a Thinkpad T60 with an Atheros-based internal wireless
interface (more specifically, AR5212 802.11abg NIC) using the default
MadWifi drivers that are shipped with Ubuntu.

This is a big problem when doing long downloads, or using SSH or VNC. At
times, nm-applet would even fail to reconnect to any of the available
networks, requiring me to restart the NetworkManager process by hand.

This does not happen on the same machine when running Windows, so
malfunctioning hardware and anything external to the computer are
obviously not the underlying cause. Other (Windows) computers on the
same wireless networks operate without any problems.

Also, the problem survived through clean installs of Ubuntu 7.04 and,
later, 7.10. So this is not an issue related to my specific settings.

After a while looking for a solution for almost 1 year, I finally found
a temporary fix: to disable IPv6. I'm not sure *why* this works, but the
fact is that it *does*. I've been happily using my WiFi now for 20 days
without a single reconnect. This is how I disabled it:

- edit /etc/modprobe.d/aliases
- change line "alias net-pf-10 ipv6" to "alias net-pf-10 off ipv6"
- reboot

I explained these steps on another bug report
(https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/64173),
but since I'm not sure whether the original poster's bug was related to
mine, I figured it would be better to open a brand new one.

** Affects: network-manager (Ubuntu)
 Importance: Undecided
 Status: New

-- 
IPv6 causes wireless to disconnect/reconnect often
https://bugs.launchpad.net/bugs/158481
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 153561] Re: can't mount usb stick

2007-10-29 Thread Mark Fraser

I've figured out the cause of the error, the devices I was trying to use
were USB2.0 and for some reason the motherboard doesn't support USB2. If
I remove the EHCI drivers, I am able to use the devices as USB1.1.

-- 
can't mount usb stick
https://bugs.launchpad.net/bugs/153561
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158478] dvd cd usb not automounting - Gutsy.

2007-10-29 Thread Gerard

Public bug reported:

With gutsy dvd cd usb not automounting, this is on three machines i have
here.

Steps:

Insert usb thumb drive, mp3 player or DVD.
Device is activated.
but no response from gutsy.

What I would expect is an icon on the desktop, and the option to open in
new folder, open with... etc.

The other expectation is the ability to "Safely remove"

I have looked through the bug list.
https://bugs.launchpad.net/ubuntu/+source/gnome-volume-manager/+bug/23279

hal group doesn't exist, but there is haldaemon

and /etc/default/hal is DAEMON_OPTS=

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
dvd cd usb not automounting - Gutsy.
https://bugs.launchpad.net/bugs/158478
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158479] GDebi can't handle paths which include spaces

2007-10-29 Thread Mark Fraser

Public bug reported:

Binary package hint: gdebi

If the path to a .deb file contains the space character then when GDebi
tries to install the package it fails with an error box containing:

The package file does not exist
A nonexistent file has been selected for installation. Please select an 
existing .deb package file.

For example, all my .deb files were in
/home/user/Desktop/Downloads/Debian Packages/

causing the error above, if I renamed it DebianPackages, then it
installs OK.

** Affects: gdebi (Ubuntu)
 Importance: Undecided
 Status: New

-- 
GDebi can't handle paths which include spaces
https://bugs.launchpad.net/bugs/158479
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158479] Re: GDebi can't handle paths which include spaces

2007-10-29 Thread Mark Fraser

Forgot to mention this is with Kubuntu 7.10 Final release, so the
package could be gdebi-kde.

-- 
GDebi can't handle paths which include spaces
https://bugs.launchpad.net/bugs/158479
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 88595] Re: [apport] vserver-info crashed with SIGSEGV

2007-10-29 Thread Luca Falavigna

Attached debdiff should fix this bug.

** Attachment added: "util-vserver_0.30.214-4ubuntu1.debdiff"
   http://launchpadlibrarian.net/10209887/util-vserver_0.30.214-4ubuntu1.debdiff

** Changed in: util-vserver (Ubuntu)
 Assignee: Luca Falavigna (dktrkranz) => (unassigned)
   Status: In Progress => Confirmed

-- 
[apport] vserver-info crashed with SIGSEGV
https://bugs.launchpad.net/bugs/88595
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 116939] Re: Properties window weirdness

2007-10-29 Thread otzenpunk

I can confirm this behaviour for Feisty and Gutsy. I didn't test other
Ubuntu releases.

-- 
Properties window weirdness
https://bugs.launchpad.net/bugs/116939
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158352] Re: Firefox is slow to stop when shutting down

2007-10-29 Thread Bogdan Butnaru

No, it really says it crashed. I have setup Firefox's session manager to
automatically load the last session, and if I close FF manually and
restart it it works correctly.

Only when I shutdown the computer with FF running (thus letting the
computer close FF) I get the error on the next start.

-- 
Firefox is slow to stop when shutting down
https://bugs.launchpad.net/bugs/158352
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 134464] Re: in dual head config a row of pixels is drawn on the wrong monitor

*** This bug is a duplicate of bug 91966 ***
https://bugs.launchpad.net/bugs/91966

"Playing video with Totem/gstreamer/Xine looks ok again. (It's
unwatchable with the Gutsy driver)" appears to have been reported
already as #32963, although my symptoms are a little different, they are
quite similar.  Thanks.

-- 
in dual head config a row of pixels is drawn on the wrong monitor
https://bugs.launchpad.net/bugs/134464
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 129081] Re: [needs-packaging] Mumble

2007-10-29 Thread Thorvald Natvig

License holders has been discussed before in this very thread. The
speex/ directory is a snapshot of libspeex and libspeexdsp. It includes
the COPYING file from that directory. Stefan Gehn and Sebastian
Schlingmann have both submitted larger OSX-related patches to Mumble and
as such should probably be mentioned in the toplevel LICENSE file. I'll
get that fixed.

BTW, before anyone gets confused, Mumble's sourcecode is BSD (revised)
licensed, but any binary packages are GPL as you include GPL'd headers
when you compile (and link to GPL libraries). So make sure the final
package is licensed with GPL. (This is also the reason LICENSE and
debian/copyright differ)

-- 
[needs-packaging] Mumble
https://bugs.launchpad.net/bugs/129081
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 150192] Re: starting X on xen kernel with nvidia module loaded causes kernel panic

2007-10-29 Thread rhalff

I am having the same problem. nvidia driver hangs the system although it works 
without a xen kernel.
Using the 'nv' driver works.

I have a kern.log attached of the crash.

I'm using an AMD Athlon64 3000+ single core.


** Attachment added: "bad caching"
   http://launchpadlibrarian.net/10209877/kern.log

-- 
starting X on xen kernel with nvidia module loaded causes kernel panic
https://bugs.launchpad.net/bugs/150192
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 85751] Re: Distorted MP3 sound

2007-10-29 Thread Fabio Ornellas

May be Debian already forces a working codec for MP3 or they have applied
the patch from CVS to fix the bug. As reported, it will be fixed on Ubuntu
8.04 (am I right?). Nothing for Gutsy though.

On 10/29/07, Yeuclid <[EMAIL PROTECTED]> wrote:
>
> I was one of the first to report this problem, and have used the amended
> version from the Devede web site to get round it.
>
> A few weeks ago, I installed Kubuntu 7.10 on a spare machine and
> downloaded
> all the updates to make it into the full release version.
>
> I decided to install Devede just to see what happened, as packages from
> the
> repositories. To my surprise it worked and I converted the first 5 minutes
> of an AVI file to DVD format without any distortion or video interference.
>
> What is the difference and why does it work on Kubuntu and not Ubuntu.
>
> I am confused, any ideas?
>
> --
> Distorted MP3 sound
> https://bugs.launchpad.net/bugs/85751
> You received this bug notification because you are a direct subscriber
> of the bug.
>


-- 
Fabio Pugliese Ornellas
E-Mail: [EMAIL PROTECTED]
gTalk: [EMAIL PROTECTED]
ICQ: 6516089
MSN: [EMAIL PROTECTED]
WWW: http://ornellas.apanela.com/

-- 
Distorted MP3 sound
https://bugs.launchpad.net/bugs/85751
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 46055] Re: Natural named range not updated

2007-10-29 Thread Bert Vorenholt

Confirmed on Kubuntu 7.10 OOo 2.3.0

Not only a named-range problem though. Even with a "normal" =SUM() formula the 
col/row range isn't updated.
When you actually do the insert on the row above the row with the formula 
(inserting a row anywhere within the range, except a new last one), the range 
gets updated, but then you have a gap in the table.

I find this bug extreemly important because this is not expected and
easy overseen, with possible (financial) consequences for the user who
is using OOo for (professional) calculations/analyzing/reporting.

-- 
Natural named range not updated
https://bugs.launchpad.net/bugs/46055
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 139635] Re: [cryptsetup] library dependency in /sbin/cryptsetup

2007-10-29 Thread Jens Gustedt

Yet to report another hit of this bug. Took me some hours to find out why my 
swap wouldn't come at boot time, altough I followed all the documentation.
I am really surprised to find that cryptsetup depends on dynamic libraries. Not 
only the ones in /usr/lib, but in general it is a bad idea. This executable is 
critical for the early boot phase, Messing around with it is playing with fire.

Found a workaround, which is to list /usr as a dependency in crypdisks,
but this only works since I only have swap encrypted for the moment.
Thinking  of what have happend if I'd just naively had encrypted my root
partition. Undermines my confidence in Ubuntu.

-- 
[cryptsetup] library dependency in /sbin/cryptsetup
https://bugs.launchpad.net/bugs/139635
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 151909] Re: Xubuntu install creates /dev/null with permissions 600

2007-10-29 Thread David Leadbeater

There were many things wrong with this install, ignore this.

** Changed in: ubuntu
   Status: New => Invalid

-- 
Xubuntu install creates /dev/null with permissions 600
https://bugs.launchpad.net/bugs/151909
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 118723] Re: KMilo/Volume Hotkeys regression

2007-10-29 Thread troycauble

Thanks zs!  That worked.

-- 
KMilo/Volume Hotkeys regression
https://bugs.launchpad.net/bugs/118723
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158001] Re: merge hydrogen 0.9.3-5 from Debian unstable

2007-10-29 Thread Emmet Hikory

** Changed in: hydrogen (Ubuntu)
   Status: In Progress => Fix Committed

-- 
merge hydrogen 0.9.3-5 from Debian unstable
https://bugs.launchpad.net/bugs/158001
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158472] Firefox crashes after file upload

2007-10-29 Thread sbsbessa

Public bug reported:

Binary package hint: firefox

Firefox crashed immediately after the upload of two files using a flash 
application at http://swfupload.mammon.se/
This has also occured at other websites, also with flash apps.

I have Ubuntu 7.06, Firefox 2.0.0.8 and Shockwave Flash 9.0 r31 plugin

ProblemType: Bug
Architecture: i386
Date: Mon Oct 29 23:02:04 2007
DistroRelease: Ubuntu 7.04
Package: firefox 2.0.0.8+1nobinonly-0ubuntu1
PackageArchitecture: i386
SourcePackage: firefox
Uname: Linux sbsbessa-desktop 2.6.20-16-generic #2 SMP Sun Sep 23 19:50:39 UTC 
2007 i686 GNU/Linux

** Affects: firefox (Ubuntu)
 Importance: Undecided
 Status: New

-- 
Firefox crashes after file upload
https://bugs.launchpad.net/bugs/158472
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158472] Re: Firefox crashes after file upload

2007-10-29 Thread sbsbessa


** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/10209845/Dependencies.txt

-- 
Firefox crashes after file upload
https://bugs.launchpad.net/bugs/158472
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158473] firefox freeze

2007-10-29 Thread SpookyGhost

Public bug reported:

Binary package hint: firefox

When i try to view the home page of site

 www.repubblica.it

Firefox fr and i need to kill it

If i try the same site with firefox downloaded from mozilla site and  unpacked 
under /usr/local i can see the site without any
problem

I am using the following plugins:

mozilla-helix-player
mozilla-acroread
flashplugin-nonfree
mozilla-mplayer
sun-java6-plugin

** Affects: firefox (Ubuntu)
 Importance: Undecided
 Status: New

-- 
firefox freeze 
https://bugs.launchpad.net/bugs/158473
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 73278] Re: crashes on audio streaming

2007-10-29 Thread Chris Scullion

No longer.  I think it was a hardware issue.

- cds


- Original Message 
From: Sebastian Kapfer <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Monday, October 29, 2007 5:48:30 PM
Subject: [Bug 73278] Re: crashes on audio streaming

Works fine here (in gusty). Is this still buggy?

-- 
crashes on audio streaming
https://bugs.launchpad.net/bugs/73278
You received this bug notification because you are a direct subscriber
of the bug.

-- 
crashes on audio streaming
https://bugs.launchpad.net/bugs/73278
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 91966] Re: screen artifacts after resume, part row of pixels in error (945GM)

You might find this bug report useful:
https://bugs.freedesktop.org/show_bug.cgi?id=12667

I notice that the git changeset which is said to cause the regression
(in that report), adds a check and message "Non-contiguous GTT entries".

Interestingly, the package from Bryce (which fixes the screen but breaks
3d) for me results in this message in my Xorg.0.log.  Specifically, I
get an error message:

(EE) intel(0): Non-contiguous GTT entries: (6295552,0x163ffbe000) vs (131072,0x 
   3f82)
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(Cannot allocate memory)

This doesn't appear in my Xorg.0.log with the stock Gutsy driver.

-- 
screen artifacts after resume, part row of pixels in error (945GM)
https://bugs.launchpad.net/bugs/91966
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 134464] Re: in dual head config a row of pixels is drawn on the wrong monitor

*** This bug is a duplicate of bug 91966 ***
https://bugs.launchpad.net/bugs/91966

Please see my comment on bug #91966 which is about that changeset.

-- 
in dual head config a row of pixels is drawn on the wrong monitor
https://bugs.launchpad.net/bugs/134464
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 134464] Re: in dual head config a row of pixels is drawn on the wrong monitor

2007-10-29 Thread eeejay

*** This bug is a duplicate of bug 91966 ***
https://bugs.launchpad.net/bugs/91966

I mentioned in a post on bug #91966 that this is the changeset that made all 
the trouble:
a4f1a7872f6f959bb4bc6568face710bee3589de
It's from the git repo pulled from: 
git://anongit.freedesktop.org/git/xorg/driver/xf86-video-intel
I'd also say that the changeset above deals with a lot of memory stuff, it's 
hard to understand.

-- 
in dual head config a row of pixels is drawn on the wrong monitor
https://bugs.launchpad.net/bugs/134464
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 154214] Re: Restricted Manager fails to start with Russian, Finnish, Romanian or Japanese localization packs.

2007-10-29 Thread Adi Roiban

** Changed in: language-pack-ro-base (Ubuntu)
 Assignee: Ubuntu Romanian Translators (ubuntu-l10n-ro) => Adi Roiban 
(adiroiban)

-- 
Restricted Manager fails to start with Russian, Finnish,Romanian or Japanese 
localization packs.
https://bugs.launchpad.net/bugs/154214
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158470] cannot open openoffice

2007-10-29 Thread Shelagh

Public bug reported:

updated new openoffice package "openoffice.org", hoping this would
resolve my difficulties of the past few days. Now nothing happens when i
use the menu iem. I did an strace oowriter and this is the output.

[EMAIL PROTECTED]:~$ strace oowriter
execve("/usr/bin/oowriter", ["oowriter"], [/* 38 vars */]) = 0
brk(0)  = 0x805f000
access("/etc/ld.so.nohwcap", F_OK)  = -1 ENOENT (No such file or directory)
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 
0xb7f08000
access("/etc/ld.so.preload", R_OK)  = -1 ENOENT (No such file or directory)
open("./tls/i686/cmov/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or 
directory)
open("./tls/i686/libc.so.6", O_RDONLY)  = -1 ENOENT (No such file or directory)
open("./tls/cmov/libc.so.6", O_RDONLY)  = -1 ENOENT (No such file or directory)
open("./tls/libc.so.6", O_RDONLY)   = -1 ENOENT (No such file or directory)
open("./i686/cmov/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
open("./i686/libc.so.6", O_RDONLY)  = -1 ENOENT (No such file or directory)
open("./cmov/libc.so.6", O_RDONLY)  = -1 ENOENT (No such file or directory)
open("./libc.so.6", O_RDONLY)   = -1 ENOENT (No such file or directory)
open("/usr/local/lib/tls/i686/cmov/libc.so.6", O_RDONLY) = -1 ENOENT (No such 
file or directory)
stat64("/usr/local/lib/tls/i686/cmov", 0xbfcd5ac8) = -1 ENOENT (No such file or 
directory)
open("/usr/local/lib/tls/i686/libc.so.6", O_RDONLY) = -1 ENOENT (No such file 
or directory)
stat64("/usr/local/lib/tls/i686", 0xbfcd5ac8) = -1 ENOENT (No such file or 
directory)
open("/usr/local/lib/tls/cmov/libc.so.6", O_RDONLY) = -1 ENOENT (No such file 
or directory)
stat64("/usr/local/lib/tls/cmov", 0xbfcd5ac8) = -1 ENOENT (No such file or 
directory)
open("/usr/local/lib/tls/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or 
directory)
stat64("/usr/local/lib/tls", 0xbfcd5ac8) = -1 ENOENT (No such file or directory)
open("/usr/local/lib/i686/cmov/libc.so.6", O_RDONLY) = -1 ENOENT (No such file 
or directory)
stat64("/usr/local/lib/i686/cmov", 0xbfcd5ac8) = -1 ENOENT (No such file or 
directory)
open("/usr/local/lib/i686/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or 
directory)
stat64("/usr/local/lib/i686", 0xbfcd5ac8) = -1 ENOENT (No such file or 
directory)
open("/usr/local/lib/cmov/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or 
directory)
stat64("/usr/local/lib/cmov", 0xbfcd5ac8) = -1 ENOENT (No such file or 
directory)
open("/usr/local/lib/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or 
directory)
stat64("/usr/local/lib", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
open("/etc/ld.so.cache", O_RDONLY)  = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=101640, ...}) = 0
mmap2(NULL, 101640, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7eef000
close(3)= 0
access("/etc/ld.so.nohwcap", F_OK)  = -1 ENOENT (No such file or directory)
open("/lib/tls/i686/cmov/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260a\1"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=1339816, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 
0xb7eee000
mmap2(NULL, 1349136, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 
0xb7da4000
mmap2(0xb7ee8000, 12288, PROT_READ|PROT_WRITE, 
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x143) = 0xb7ee8000
mmap2(0xb7eeb000, 9744, PROT_READ|PROT_WRITE, 
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7eeb000
close(3)= 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 
0xb7da3000
set_thread_area({entry_number:-1 -> 6, base_addr:0xb7da36b0, limit:1048575, 
seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, 
useable:1}) = 0
mprotect(0xb7ee8000, 4096, PROT_READ)   = 0
munmap(0xb7eef000, 101640)  = 0
getpid()= 9341
rt_sigaction(SIGCHLD, {SIG_DFL}, {SIG_DFL}, 8) = 0
geteuid32() = 1000
brk(0)  = 0x805f000
brk(0x808)  = 0x808
getppid()   = 9340
stat64("/home/shelagh", {st_mode=S_IFDIR|0755, st_size=16384, ...}) = 0
stat64(".", {st_mode=S_IFDIR|0755, st_size=16384, ...}) = 0
open("/usr/bin/oowriter", O_RDONLY) = 3
fcntl64(3, F_DUPFD, 10) = 10
close(3)= 0
fcntl64(10, F_SETFD, FD_CLOEXEC)= 0
rt_sigaction(SIGINT, NULL, {SIG_DFL}, 8) = 0
rt_sigaction(SIGINT, {0x80551b0, ~[RTMIN RT_1], 0}, NULL, 8) = 0
rt_sigaction(SIGQUIT, NULL, {SIG_DFL}, 8) = 0
rt_sigaction(SIGQUIT, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGTERM, NULL, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTERM, {SIG_DFL}, NULL, 8) = 0
read(10, "#!/bin/sh\nexport OOO_EXTRA_ARG=\'"..., 8192) = 84
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, 
child_tidptr=0xb7da3

[Bug 91966] Re: screen artifacts after resume, part row of pixels in error (945GM)

2007-10-29 Thread eeejay

I suspect that the reason the corrupt row is disappearing is because DRI
is disabled when the server reverts to software rendering. This is
something we already knew: disabling DRI makes the screen artifact go
away.

-- 
screen artifacts after resume, part row of pixels in error (945GM)
https://bugs.launchpad.net/bugs/91966
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 157154] Re: clamav-daemon eats 100% CPU forever on feisty server

2007-10-29 Thread Swâmi Petaramesh

Then I'll post a comment if I see this happening again. If I don't see
it happening, I'm not sure after how long I should assume it is now
fixed ;-)

-- 
clamav-daemon eats 100% CPU forever on feisty server
https://bugs.launchpad.net/bugs/157154
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158466] Re: OpenOffice 2.3 freeze with actions in calc

2007-10-29 Thread Sam

Supplement, I can reproduce the behavior without Compiz desktop effects.

-- 
OpenOffice 2.3 freeze with actions in calc
https://bugs.launchpad.net/bugs/158466
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 88772] Re: X/radeon in feisty breaks ppc/ati external dvi/vga output

2007-10-29 Thread Edwin Grubbs

*** This bug is a duplicate of bug 88741 ***
https://bugs.launchpad.net/bugs/88741

The "Screen and Graphics Preferences" and the "Screen Resolution
Preferences" in gnome's System menu erroneously showed the only
resolution options as 303Hz and 304Hz.

After I changed the monitor model in "Screen and Graphics Preferences", I
correctly got the refresh rate options 60Hz, 65Hz, 70Hz, 75Hz, 85Hz, and it
would let me test the refresh rates, but the "OK" button didn't actually make
the change. 70Hz was the highest rate that didn't have the pincushion
distortion.

If I re-opened "Screen and Graphics Preferences", it would show the correct
ViewSonic P95f+ monitor, but it would only show 303Hz and 304Hz as options.

"Screen and Graphics Preferences" added the modlines to the xorg.conf. When I
restarted xorg, it was running at 1600x1200, although the virtual desktop size
was 2048x1536. I was able to change the resolution in "Screen and Graphics
Preferences" from 2048x1536 to [EMAIL PROTECTED]

Interestingly, the "Screen and Graphics Preferences" removed these lines from
the Seciont "Device"
  Option "CRT2HSync" "30-110"
  Option "CRT2VRefresh" "50-160"

There must be something else that "Screen and Graphics Preferences" is doing
differently than dpkg-reconfigure that gets it to work. Since the "Screen and
Graphics Preferences" xorg.conf now works, I was worried that the
xorg.conf from dpkg-reconfigure only didn't work because it had a slightly
lower horizontal and vertical sync rate. However, when I used these configs it
still didn't work:
Section "Monitor"
Identifier  "Generic Monitor"
Option  "DPMS"
HorizSync   30-110
VertRefresh 50-160
EndSection

After looking at the diffs between the configs, I figured that the following
change is what fixed the xorg.conf without resorting to CRT2HSync and
CRT2VRefresh. 

 Section "Device"
Identifier  "ATI Technologies Inc RV280 [Radeon 9200 SE]"
+   Boardname   "ati"
+   Busid   "PCI:2:0:0"
Driver  "ati"
+   Screen  0
+   Option  "MergedFB"  "off"
-   BusID   "PCI:2:0:0"
 EndSection

It turns out that 
Option  "MergedFB"  "off"
fixes the issue with the xorg.conf generated by debconf.

** Attachment added: "Xorg.0.log works with MergedFB=off"
   http://launchpadlibrarian.net/10209620/Xorg.0.log

-- 
X/radeon in feisty breaks ppc/ati external dvi/vga output
https://bugs.launchpad.net/bugs/88772
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 110442] Re: there are lines over the text on emails at hotmail

2007-10-29 Thread bobby

I will have to try, I check mail and didn't even look.  thanks
  - Original Message - 
  From: phirestalker 
  To: [EMAIL PROTECTED] 
  Sent: Sunday, October 28, 2007 10:51 PM
  Subject: [Bug 110442] Re: there are lines over the text on emails at hotmail


  it seems to be fixed after upgrading to gutsy

  -- 
  there are lines over the text on emails at hotmail
  https://bugs.launchpad.net/bugs/110442
  You received this bug notification because you are a direct subscriber
  of the bug.

-- 
there are lines over the text on emails at hotmail
https://bugs.launchpad.net/bugs/110442
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 129910] Re: tty[1-6] are active but display nothing in Gutsy

2007-10-29 Thread interbird

@ardchoille

I actually used mc as root to add the module-names and then posted the 
append-commands without checking if they worked.
And you are right, they don't work; shame on me.
Your comment reminds me again to always double-check before posting.
Thanks !

-- 
tty[1-6] are active but display nothing in Gutsy
https://bugs.launchpad.net/bugs/129910
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 154214] Re: Restricted Manager fails to start with Russian, Finnish, Romanian or Japanese localization packs.

2007-10-29 Thread Adi Roiban

I have updated the Romanian key. I was the one translating '%(os)s' to
'%os'.

Should I send a patch, or it is of if the key is updated in rosetta?

** Changed in: language-pack-ro-base (Ubuntu)
   Status: Confirmed => In Progress

-- 
Restricted Manager fails to start with Russian, Finnish,Romanian or Japanese 
localization packs.
https://bugs.launchpad.net/bugs/154214
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158468] [gutsy] openoffice writer crashes when selecting a graphic in a document imported from Word.

2007-10-29 Thread Veloce

Public bug reported:

Binary package hint: openoffice.org

In a document created in Word with a picture  in a frame within the
header, when attempting to select the graphic open office writer ceases
to respond and has to be force quit.

It does not appear to be using the CPU (or any other resource that I can
see.)

I have created another file with the same characteristics and reproduced
the problem.

I can supply this file - not sure how to attach it to this bug report.

** Affects: openoffice.org (Ubuntu)
 Importance: Undecided
 Status: New

-- 
[gutsy] openoffice writer crashes when selecting a graphic in a document 
imported from Word.
https://bugs.launchpad.net/bugs/158468
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158468] Re: [gutsy] openoffice writer crashes when selecting a graphic in a document imported from Word.

2007-10-29 Thread Veloce


** Attachment added: "File that crashes open office writer"
   http://launchpadlibrarian.net/10209616/open_office_error.doc

-- 
[gutsy] openoffice writer crashes when selecting a graphic in a document 
imported from Word.
https://bugs.launchpad.net/bugs/158468
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 129081] Re: [needs-packaging] Mumble

2007-10-29 Thread Johan Euphrosine

Here is the list in a more readable format, Thanks in advance:

Thorvald Natvig
Xiph.org Foundation
Jean-Marc Valin
Analog Devices Inc.
Commonwealth Scientific and Industrial Research 
David Rowe
EpicGames
Jutta Degener
Carsten Bormann
Jean-Marc Valin
Mark Borgerding
Christopher Montgomery
Stefan Gehn
Sebastian Schlingmann

-- 
[needs-packaging] Mumble
https://bugs.launchpad.net/bugs/129081
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 129081] Re: [needs-packaging] Mumble

2007-10-29 Thread Johan Euphrosine

To Thorvald Natvig:
Norsetto and I noticed that there are additional authors quoted in some souces, 
are there missing name from the following list ?
./LICENSE:Copyright (C) 2005-2007, Thorvald Natvig <[EMAIL PROTECTED]>
./speex/COPYING:Copyright 2002-2007 Xiph.org Foundation
./speex/COPYING:Copyright 2002-2007 Jean-Marc Valin
./speex/COPYING:Copyright 2005-2007 Analog Devices Inc.
./speex/COPYING:Copyright 2005-2007 Commonwealth Scientific and Industrial 
Research 
./speex/COPYING:Copyright 1993, 2002, 2006 David Rowe
./speex/COPYING:Copyright 2003  EpicGames
./speex/COPYING:Copyright 1992-1994 Jutta Degener, Carsten Bormann
./speex/include/speex/speex.h:/* Copyright (C) 2002-2006 Jean-Marc Valin*/
./speex/libspeex/_kiss_fft_guts.h:Copyright (c) 2003-2004, Mark Borgerding
./speex/libspeex/vorbis_psy.c:/* Copyright (C) 2005 Jean-Marc Valin, CSIRO, 
Christopher Montgomery
./src/mumble/PAAudio.cpp:   Copyright (C) 2007, Stefan Gehn 
./src/mumble/TextToSpeech_macx.cpp:/* Copyright (C) 2007, Sebastian Schlingmann 
<[EMAIL PROTECTED]>

-- 
[needs-packaging] Mumble
https://bugs.launchpad.net/bugs/129081
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 133666] Re: please patch linux-source-2.6.22 to fix ata_piix bug

2007-10-29 Thread strider22

See ubuntu forum http://ubuntuforums.org/showthread.php?t=586894
for more discussion of this item

-- 
please patch linux-source-2.6.22 to fix ata_piix bug
https://bugs.launchpad.net/bugs/133666
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 141439] Re: Laptop nc8430, 4GB Ram and fglrx

2007-10-29 Thread Yigael

me too (on 7.10)...

$ uname -a
Linux svyfleishmanlnx 2.6.22-14-generic #1 SMP Sun Oct 14 23:05:12 GMT 2007 
i686 GNU/Linux

Jörn - I'm kind of a newby. May I ask how did you verify that the destop 
kernels have HIGHMEM4G set?
also - does setting HIGHMEM4G mean that they I _should_ be able to see 4G 
(/proc/meminfo) when not using fglrx?

-- 
Laptop nc8430, 4GB Ram and fglrx
https://bugs.launchpad.net/bugs/141439
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158460] Re: kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive

uname -a:
Linux (none) 2.6.22-14-generic #1 SMP Sun Oct 14 23:05:12 GMT 2007 i686 unknown

Couldn't post lspci

-- 
kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive
https://bugs.launchpad.net/bugs/158460
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158460] Re: kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive


** Attachment added: "dmesg 8/8"
   http://launchpadlibrarian.net/10209576/PA293188.JPG

-- 
kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive
https://bugs.launchpad.net/bugs/158460
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158460] Re: kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive


** Attachment added: "dmesg 7/8"
   http://launchpadlibrarian.net/10209560/PA293187.JPG

-- 
kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive
https://bugs.launchpad.net/bugs/158460
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158460] Re: kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive


** Attachment added: "dmesg 6/8"
   http://launchpadlibrarian.net/10209510/PA293186.JPG

-- 
kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive
https://bugs.launchpad.net/bugs/158460
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158460] Re: kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive


** Attachment added: "dmesg 5/8"
   http://launchpadlibrarian.net/10209504/PA293185.JPG

-- 
kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive
https://bugs.launchpad.net/bugs/158460
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158460] Re: kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive


** Attachment added: "dmesg 4/8"
   http://launchpadlibrarian.net/10209497/PA293184.JPG

-- 
kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive
https://bugs.launchpad.net/bugs/158460
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158460] Re: kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive


** Attachment added: "dmesg 3/8"
   http://launchpadlibrarian.net/10209492/PA293183.JPG

-- 
kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive
https://bugs.launchpad.net/bugs/158460
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158460] Re: kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive


** Attachment added: "dmesg 2/8"
   http://launchpadlibrarian.net/10209487/PA293182.JPG

-- 
kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive
https://bugs.launchpad.net/bugs/158460
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158460] Re: kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive


** Attachment added: "dmesg 1/8"
   http://launchpadlibrarian.net/10209483/PA293181.JPG

-- 
kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive
https://bugs.launchpad.net/bugs/158460
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158460] kernel 2.6.22-14.46 in alternate/live oopses with ST340823A hard drive