[Bug 238574] ACK of sync request
ACKed. -- Please sync lilypond 2.10.33-2.2 (universe) from Debian unstable (main) https://bugs.launchpad.net/bugs/238574 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 44335] Re: IMAP/POP3+SSL/TLS are disabled
Running Hardy Heron I downloaded the most recent source of mail-notification from: http://www.nongnu.org/mailnotify/ And followed the Readme to install and it works fine with ssl/tls notification. I'm very happy. Being relatively new to compiling, I cheated a bit before I installed by running sudo apt-get build-dep mail-notification from the terminal. This installed the dependencies and the compliers (true?) so I could build and install mail-notification. Had I not run apt-get build-dep mail-notification, how would I have known what compilers and dependencies were needed to build and install? Thanks. -- IMAP/POP3+SSL/TLS are disabled https://bugs.launchpad.net/bugs/44335 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 225125] Re: /etc/ssl/private/ssl-cert-snakeoil.key is world readable
Mohan [2008-06-09 13:19 -]: > [EMAIL PROTECTED]:/var/lib/postgresql/8.3/main# ls -l > /etc/ssl/private/ssl-cert-snakeoil.key > -rwxr- 1 root ssl-cert 891 2008-05-28 16:19 > /etc/ssl/private/ssl-cert-snakeoil.key It should be "640", not "740", but that isn't the cause of your breakage here. Can you please give the output of ls -ld /etc/ssl/private ? Maybe the entire directory is only accessible as root. -- /etc/ssl/private/ssl-cert-snakeoil.key is world readable https://bugs.launchpad.net/bugs/225125 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 225125] Re: /etc/ssl/private/ssl-cert-snakeoil.key is world readable
Hello Mohan! I have psql happily running. Executable flag on key file is not necessary (that was my fault as well) and/or could even be forbidden in this case - try to set exact permission flags. Check also directory permission and owners. # ls -ld /etc/ssl/private/ drwx--x--- 2 root ssl-cert 4096 2008-05-08 12:26 /etc/ssl/private/ # ls -l /etc/ssl/private/ -rw-r- 1 root ssl-cert 887 2008-05-08 12:26 ssl-cert-snakeoil.key -- /etc/ssl/private/ssl-cert-snakeoil.key is world readable https://bugs.launchpad.net/bugs/225125 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 231325] Re: package gcc-doc 4:4.2.3-1ubuntu4 failed to install/upgrade: subprocess new pre-removal script returned error exit status 1
this update works for me. please could you - ls -l /usr/share/info/dir* - rm -f /usr/share/info/dir.lock and retry? ** Changed in: gcc-defaults (Ubuntu) Status: New => Incomplete -- package gcc-doc 4:4.2.3-1ubuntu4 failed to install/upgrade: subprocess new pre-removal script returned error exit status 1 https://bugs.launchpad.net/bugs/231325 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 195982] Re: Shift key (and caps lock) stop working when using VMWare
Doesn't happen on CentOS 5 / RedHat EL 5 (VMware Server 1.0.5). This might confirm that the problem is indeed related Xorg version (CentOS 5 has Xorg 7.1.1), though there are more variables (gtk version, kernel etc) -- Shift key (and caps lock) stop working when using VMWare https://bugs.launchpad.net/bugs/195982 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238775] Re: Firefox randomly and silently exits
** Attachment added: "lshw-output.txt" http://launchpadlibrarian.net/15167893/lshw-output.txt -- Firefox randomly and silently exits https://bugs.launchpad.net/bugs/238775 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238775] Re: Firefox randomly and silently exits
** Attachment added: ".xsession-errors" http://launchpadlibrarian.net/15167841/.xsession-errors -- Firefox randomly and silently exits https://bugs.launchpad.net/bugs/238775 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238775] Re: Firefox randomly and silently exits
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/15167793/Dependencies.txt ** Attachment added: "pluginreg.dat.txt" http://launchpadlibrarian.net/15167794/pluginreg.dat.txt ** Attachment added: "profiles.ini.txt" http://launchpadlibrarian.net/15167795/profiles.ini.txt -- Firefox randomly and silently exits https://bugs.launchpad.net/bugs/238775 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238775] [NEW] Firefox randomly and silently exits
Public bug reported: Binary package hint: firefox-3.0 I have a Dell XPS M1710 laptop with a pure, up-to-date Hardy 32-bit installation. When using Firefox it will sometimes silently exit for no apparent reason, as if it crashed, except that apport is not triggered and there is no crash file in /var/crash. Upon restarting it I get the standard "Start New Session / Restore Session" dialog, indicating it was definitely irregular termination. The bug occurs about once every few days. Let me know what I should do to gather more information. $ lsb_release -rd Description:Ubuntu 8.04 Release:8.04 $ apt-cache policy firefox firefox: Installed: 3.0~b5+nobinonly-0ubuntu3 Candidate: 3.0~b5+nobinonly-0ubuntu3 Version table: *** 3.0~b5+nobinonly-0ubuntu3 0 500 http://archive.ubuntu.com hardy/main Packages 100 /var/lib/dpkg/status ProblemType: Bug Architecture: i386 Date: Mon Jun 9 23:21:14 2008 DistroRelease: Ubuntu 8.04 NonfreeKernelModules: nvidia Package: firefox-3.0 3.0~b5+nobinonly-0ubuntu3 PackageArchitecture: i386 ProcEnviron: PATH=/home/username/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_CA.UTF-8 SHELL=/bin/bash SourcePackage: firefox-3.0 Uname: Linux 2.6.24-18-generic i686 ** Affects: firefox-3.0 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- Firefox randomly and silently exits https://bugs.launchpad.net/bugs/238775 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 141528] Re: Mythweb Fatal Error memory size exhausted
I do see this and it really is here that the bug exists: /etc/apache2/sites-available/mythweb.conf ** Changed in: mythplugins (Ubuntu) Status: Won't Fix => Confirmed -- Mythweb Fatal Error memory size exhausted https://bugs.launchpad.net/bugs/141528 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236830] Re: cifs does not support kerberos authentication
The CONFIG_CIFS_EXPERIMENTAL enables a number of unrelated features, all of which should be no-ops by default: - CIFS ACL mapping - dnotify support - "export ops" (stub support for re-exporting via NFS) and it allows the CIFS_UPCALL option to be enabled. CIFS_UPCALL only turns on support for kerberos/SPNEGO authentication. -- cifs does not support kerberos authentication https://bugs.launchpad.net/bugs/236830 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238577] Re: needed-packaging for Acetone ISO5
** Summary changed: - needs-packaging for Acetone ISO + needed-packaging for Acetone ISO5 -- needed-packaging for Acetone ISO5 https://bugs.launchpad.net/bugs/238577 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238773] [NEW] Scribes 0.3.3.3 tabs to spaces functionality broken
Public bug reported: Binary package hint: scribes To reproduce: 1. Open text file 2. Right click in text buffer, go to 'spaces' then 'tabs to spaces'. 3. Read traceback: Traceback (most recent call last): File "/usr/share/scribes/plugins/Spaces/Trigger.py", line 146, in __tabs_to_spaces_cb show_busy_textview_cursor(self.__editor.textview) NameError: global name 'show_busy_textview_cursor' is not defined ** Affects: scribes Importance: Undecided Status: New ** Affects: scribes (Ubuntu) Importance: Undecided Status: New ** Also affects: scribes Importance: Undecided Status: New -- Scribes 0.3.3.3 tabs to spaces functionality broken https://bugs.launchpad.net/bugs/238773 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238774] [NEW] cryptdisks doesnt start on boot
Public bug reported: Binary package hint: cryptsetup Cryptdisks doesnt start on boot. Problem: cryptdisks-early and cryptdisks don't complete successfully I did some bug hunting and found on boot there was an error showing twice. This is not verbatim, but it was something like Error: exec env failed (line 34) Since they happened twice and these processes run the same script, I knew it must have been cryptdisks. The /lib/cryptsetup/cryptdisks.functions file around line 34: # Always output to console stdin=`readlink /proc/self/fd/0` if [ "${stdin#/dev/null}" != "$stdin" ] && [ "$ON_VT" != "yes" ]; then exec env ON_VT=yes /usr/bin/openvt -f -c `fgconsole` -w $0 "$@" fi Commenting the above out allows this to work. I'm not a bash guru; I don't know what is wrong there. All I know is that running the script while logged into X completes successfully. ** Affects: cryptsetup (Ubuntu) Importance: Undecided Status: New -- cryptdisks doesnt start on boot https://bugs.launchpad.net/bugs/238774 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 50781] Re: 8-bit characters not displayed properly in mc viewer and editor
** Changed in: mc (Debian) Status: Incomplete => Fix Committed -- 8-bit characters not displayed properly in mc viewer and editor https://bugs.launchpad.net/bugs/50781 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 205205] Re: [7.10 to 8.04 beta] Could not calculate the upgrade
No, the bug was solved. Actually, it occurs if ubuntu-desktop package is not installed from synaptics. The package was removed in my case as I had used the ubuntu-studio-sounds package. Once, the ubuntu-desktop package is re-selected, the installer gives no error. ** Changed in: update-manager (Ubuntu) Assignee: (unassigned) => Pratul Kalia (lut4rp) Status: Incomplete => Invalid -- [7.10 to 8.04 beta] Could not calculate the upgrade https://bugs.launchpad.net/bugs/205205 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 210600] Re: Display corruption in VTs on Intel 855GME
I stumbled through a build following the X.Org Wiki guidelines here: http://www.x.org/wiki/Development/git I'm not sure I did it correctly. I only built xf86-video-intel and I had problems with the "export LD_LIBRARY_PATH=/opt/gfx-test/lib" not having any effect on which libs X was using. I ended up renaming the originals and using symlinks to the new ones. The white lines are gone but now I see either black static (especially noticeable with Midnight Commander and aptitude) or with subsequent VT switching I have some text corruption like the scrollbar block in MC. In xorg.conf I have "ForceEnablePipeA" commented out and now see "underrun on pipe A" errors in Xorg.0.log. Re-enabling it eliminates the errors in the log but the other VT problem are still present. -- Display corruption in VTs on Intel 855GME https://bugs.launchpad.net/bugs/210600 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 237621] Re: pciutils needs update for 8.04.1
Copied to hardy-updates. ** Changed in: pciutils (Ubuntu Hardy) Status: Fix Committed => Fix Released -- pciutils needs update for 8.04.1 https://bugs.launchpad.net/bugs/237621 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 215904] Re: [SRU] (ITS#5518) Assertion error in io.c:234: ber_flush2
Copied to hardy-updates. Thanks for all the testing feedback! ** Tags added: verification-done ** Tags removed: verification-needed ** Changed in: openldap2.3 (Ubuntu Hardy) Status: Fix Committed => Fix Released -- [SRU] (ITS#5518) Assertion error in io.c:234: ber_flush2 https://bugs.launchpad.net/bugs/215904 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238767] Re: [Hardy] Cannot open audio file from Nautilus
This is actually not a bug in Nautilus.; VLC does not use the GIO/GVFS system, but accepts cdda:// URIs of a different format (as you yourself specified). VLC is an edge-case in this situation, as it clearly can accept URIs in some cases, however not generally. This is probably a bug /mis-feature in VLC, but they'll have to decide how they want to handle it (be that have an input module for GIO, or not take VFS URIs from Nautilus). There's a subtle, well, miscommunication bug that might exist here. GVFS claims the cdda scheme which is already in use by so many applications that it may be disruptive to do so. Upstream is currently considering renaming this scheme to cddafs to avoid this confusion. See http://bugzilla.gnome.org/show_bug.cgi?id=527159 for details. ** Changed in: nautilus (Ubuntu) Importance: Undecided => Low Assignee: (unassigned) => Ubuntu Desktop Bugs (desktop-bugs) Status: New => Invalid ** Also affects: vlc (Ubuntu) Importance: Undecided Status: New -- [Hardy] Cannot open audio file from Nautilus https://bugs.launchpad.net/bugs/238767 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 232255] Re: ov51x-jpeg donot charge in to kernel
Thank you for taking the time to report this issue and helping to make Ubuntu better. Examining the information you have given us, this does not appear to be a bug report, furthermore you've solved it by yourself, so we are closing it. Thanks again and don't hesitate to submit any new bug you may find. ** Changed in: ov51x-jpeg (Ubuntu) Status: New => Invalid -- ov51x-jpeg donot charge in to kernel https://bugs.launchpad.net/bugs/232255 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218955] Re: upgrade to hardy breaks lirc 0.8.3pre1 kernel modules
Copied to hardy-updates. ** Changed in: lirc (Ubuntu Hardy) Status: Fix Committed => Fix Released -- upgrade to hardy breaks lirc 0.8.3pre1 kernel modules https://bugs.launchpad.net/bugs/218955 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 99822] Re: [feisty] cannot edit song tags in ipod
** Changed in: banshee Status: Incomplete => Confirmed -- [feisty] cannot edit song tags in ipod https://bugs.launchpad.net/bugs/99822 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238771] [NEW] apt crashes after incomplete install
Public bug reported: Binary package hint: adept-manager I was installing sun-java6 (several packages), when I did not noticed one license agreement and pressed next. After this I got error message and adept-manager crashed. I restarted it, then it reported that there was error and give me option to auto correct it. I pressed yes and it crashed again (it was crashing every time). So, I run from shell apt. It suggested running: apt-get install sun-java6.jdk and dpkg --configure -a Now package manager works, but reports an error every time I try to install anything. I am runing: Kubuntu 8.04 with KDE 3.5 ** Affects: adept (Ubuntu) Importance: Undecided Status: New -- apt crashes after incomplete install https://bugs.launchpad.net/bugs/238771 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234196] Re: [SRU] dnPrettyNormal: Assertion `pretty != ((void *)0)' failed.
Copied to hardy-updates. ** Tags added: verification-done ** Tags removed: verification-needed ** Changed in: openldap2.3 (Ubuntu Hardy) Status: Fix Committed => Fix Released -- [SRU] dnPrettyNormal: Assertion `pretty != ((void *)0)' failed. https://bugs.launchpad.net/bugs/234196 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238769] [NEW] File-save dialog crashes host application under openbox
Public bug reported: I have found that the two applications I have tested, gedit and firefox, both crash when attempting to show the File->Save dialog. I run openbox as my window manager instead of Gnome, which seems to be significant. I have used the following scenarios to determine as best I can where the crash is coming from. Scenario: Log in through GDM into openbox WITHOUT running gnome-settings-daemon, open gedit and attempt to save a file. Result: File save dialog works, but looks ugly. It is not themed according to what I configured in Gnome settings. Scenario: Log in through GDM into Gnome, open gedit and attempt to save a file. Result: File save dialog works and looks fine, themed according to my Gnome settings. Scenario: Log in through GDM into openbox with gnome-settings-daemon command in my .xsession file, open gedit and attempt to save a file. Result: gedit crashes with "Segmentation fault" as the only output to the console. This behavior is also happening when using firefox and trying to do a Save Image As... on an image, which normally brings up the same dialog. I apologize if this is mis-filed, but I'm not sure how to track down where this should actually be directed. [EMAIL PROTECTED]:~$ lsb_release -rd Description:Ubuntu 8.04 Release:8.04 [EMAIL PROTECTED]:~$ apt-cache policy gnome-settings-daemon gnome-settings-daemon: Installed: 2.22.1-0ubuntu2 Candidate: 2.22.1-0ubuntu2 Version table: *** 2.22.1-0ubuntu2 0 500 http://us.archive.ubuntu.com hardy-updates/main Packages 100 /var/lib/dpkg/status 2.22.1-0ubuntu1 0 500 http://us.archive.ubuntu.com hardy/main Packages ** Affects: firefox-3.0 (Ubuntu) Importance: Undecided Status: New ** Affects: gnome-settings-daemon (Ubuntu) Importance: Undecided Status: New ** Also affects: firefox-3.0 (Ubuntu) Importance: Undecided Status: New -- File-save dialog crashes host application under openbox https://bugs.launchpad.net/bugs/238769 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 232400] Re: After hibernate, PC is slow to resume
Thomas K wrote: > What graphics hardware and drivers do you have? These are the most > common cause of issues with suspend/resume. Apologies for the delay. I have the nVidia binary drivers from Ubuntu and I use the GeForce 8400 GS (rev a1). Thanks for looking into this Thomas. -- Sohail Somani http://uint32t.blogspot.com -- After hibernate, PC is slow to resume https://bugs.launchpad.net/bugs/232400 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 15051] Re: grep -P is not supported
I'll have a look at this if nobody else beats me to it. But not very soon, I'm still on Hardy duty. ** Changed in: grep (Ubuntu) Assignee: (unassigned) => Martin Pitt (pitti) Target: None => intrepid-alpha-6 -- grep -P is not supported https://bugs.launchpad.net/bugs/15051 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 184015] Sponsor Request
Luke: can you please take a look at it? -- add celeron m (p4-clockmod) userspace frequency support to loadcpufreq and cpufrequtils init scripts, patch included https://bugs.launchpad.net/bugs/184015 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 195929] Re: Cosmetic bug: rectangular white outline surrounding rounded buttons
Reading https://wiki.ubuntu.com/StableReleaseUpdates seems to indicate that this issue is not serious enough to warrant an SRU. Unless someone says otherwise, of course ;-) -- Cosmetic bug: rectangular white outline surrounding rounded buttons https://bugs.launchpad.net/bugs/195929 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 228994] Re: package update-manager 1:0.87.24 failed to install/upgrade: ErrorMessage: SystemError in cache.commit(): E:Sub-process /usr/bin/dpkg returned an error code (1)
Hi, I ended up making a clean install instead of an dist-upgrade since I have been dist-upgrading since Hoary. So I no longer have access to those files. Sorry. Thanks for a great OS! Michael Ralph Janke wrote: > Thanks for reporting this problem and helping to make Ubuntu better. > > Could you please provide the files in the directory > > /var/log/dist-upgrade/ > > Thanks > > ** Changed in: update-manager (Ubuntu) > Assignee: (unassigned) => Ralph Janke (txwikinger) >Status: New => Incomplete > > -- Michael Green Computational Biology & Biological Physics Department of Theoretical Physics Lund University Sölvegatan 14A SE-223 62 Lund Sweden email: [EMAIL PROTECTED] phone: +46 (0)46 2223494 fax: +46 (0)46 2229686 www: http://cbbp.thep.lu.se/~michael Please avoid sending me Word or PowerPoint attachments. See http://www.gnu.org/philosophy/no-word-attachments.html -- package update-manager 1:0.87.24 failed to install/upgrade: ErrorMessage: SystemError in cache.commit(): E:Sub-process /usr/bin/dpkg returned an error code (1) https://bugs.launchpad.net/bugs/228994 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 228994] Re: package update-manager 1:0.87.24 failed to install/upgrade: ErrorMessage: SystemError in cache.commit(): E:Sub-process /usr/bin/dpkg returned an error code (1)
Hi, I ended up making a clean install instead of an dist-upgrade since I have been dist-upgrading since Hoary. So I no longer have access to those files. Sorry. Thanks for a great OS! Michael Ralph Janke wrote: > Thanks for reporting this problem and helping to make Ubuntu better. > > Could you please provide the files in the directory > > /var/log/dist-upgrade/ > > Thanks > > ** Changed in: update-manager (Ubuntu) > Assignee: (unassigned) => Ralph Janke (txwikinger) >Status: New => Incomplete > > -- Michael Green Computational Biology & Biological Physics Department of Theoretical Physics Lund University Sölvegatan 14A SE-223 62 Lund Sweden email: [EMAIL PROTECTED] phone: +46 (0)46 2223494 fax: +46 (0)46 2229686 www: http://cbbp.thep.lu.se/~michael Please avoid sending me Word or PowerPoint attachments. See http://www.gnu.org/philosophy/no-word-attachments.html -- package update-manager 1:0.87.24 failed to install/upgrade: ErrorMessage: SystemError in cache.commit(): E:Sub-process /usr/bin/dpkg returned an error code (1) https://bugs.launchpad.net/bugs/228994 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236830] Re: cifs does not support kerberos authentication
* Kernel change is isolated, that looks reasonably ok. I take it CONFIG_CIFS_EXPERIMENTAL does not change any behaviour, just enables CONFIG_CIFS_UPCALL config option? Does CONFIG_CIFS_UPCALL only enables the userspace callback for authorization (cifs.spnego) or any other behaviour? * I wouldn't like to promote keyutils to main in hardy (it sounds fine for MIR for intrepid, though). Since we have to touch the samba package anyway and backport cifs.spnego, can this be modified to point out "Please install the keyutils package" in the error message if it is missing? -- cifs does not support kerberos authentication https://bugs.launchpad.net/bugs/236830 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238021] Re: Please sync cgal 3.3.1-3 (multiverse) from Debian unstable (main)
This fails to build for some reason: Testing for OPENGL (for Unix) ... ok. Testing for LAPACK (Unix default) ... linking or execution failed. Linker call: -- g++ -o ./tmp_test ./tmp_test.o -llapack -llapack -lf77blas -lcblas -latlas -lgfortran -Wl,-Bsymbolic-functions -lm Got the following error messages: - /usr/bin/ld: warning: libgfortran.so.2, needed by /usr/lib/gcc/x86_64-linux-gnu/4.3.1/../../../../lib/liblapack.so, may conflict with libgfortran.so.3 Run program tmp_test: -- Got the following output: - ./tmp_test: symbol lookup error: /usr/lib/atlas/liblapack.so.3gf: undefined symbol: _gfortran_pow_r8_i4 Testing for QT (Unix (multi-threaded)) ... compilation failed. Compiler call: -- g++ -Wall -frounding-math -I/tmp/buildd/cgal-3.3.1/include/CGAL/config/x86-64_Linux-2.6_g++-4.3.1 -g -O2 -c './tmp_test.cpp' Got the following error messages: - ./tmp_test.cpp:27:21: error: qglobal.h: No such file or directory ./tmp_test.cpp:28:23: error: qmemarray.h: No such file or directory ./tmp_test.cpp:30: error: expected constructor, destructor, or type conversion before '<' token ./tmp_test.cpp: In function 'int main()': ./tmp_test.cpp:44: error: 'QT_VERSION_STR' was not declared in this scope ./tmp_test.cpp:46: error: 'QArray' was not declared in this scope ./tmp_test.cpp:46: error: expected primary-expression before 'int' ./tmp_test.cpp:46: error: expected `;' before 'int' ./tmp_test.cpp:48: error: 'a' was not declared in this scope Testing for QT (Unix (multi-threaded)) with include /usr/include/qt3 ... ok. Linking QT3MT without extra libdir ... ok. Error: Setup tests failed. Please correct your setup. ** D O N E ** make: *** [build-stamp] Error 1 dpkg-buildpackage: failure: debian/rules build gave error exit status 2 pbuilder: Failed autobuilding of package -> Aborting with an error -> unmounting dev/pts filesystem -> unmounting proc filesystem -> cleaning the build env -> removing directory /var/cache/pbuilder/build//8860 and its subdirectories -- Please sync cgal 3.3.1-3 (multiverse) from Debian unstable (main) https://bugs.launchpad.net/bugs/238021 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 32389] Re: [upstream] nvidia-glx doesn't restore state on NV35/NV36 cards. Causes random mess on screen or system hang.
Just installed Hardy, and have this issue. It didn't occur until I enabled the Nvidia restricted drivers. After partially disabling them (nvidia-glx-new would not uninstall for some reason) I did not get the mess on my screen, and it shut down correctly. I decided to install a fresh Hardy system and using EnvyNg this time. The same mess upon sutdown/restart began to occur on my screen after that install. I'm running HP dv6448se, Nvidia GeForce Go 6150. -- [upstream] nvidia-glx doesn't restore state on NV35/NV36 cards. Causes random mess on screen or system hang. https://bugs.launchpad.net/bugs/32389 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218234] Re: [regression] Messed Scre en Hides "Remove CD" Message After Install
Thanks for your fast answer, I didn't notice the lspci, I think that this will be enough since the graphic card is clearly identified. I added it to the bug description to help developers. ** Description changed: Binary package hint: usplash After installation, screen is messed and computer seems unresponsive. To reproduce 0) Install Hardy Beta from Live-CD Installation proceeds normally to finish. 1) "Do you want to continue using live-cd or reboot?" Reboot The bug: Screen is messed. It's full of green stripes and colorful pixels, looks like random memory contents. CD is ejected. Computer looks crashed. Typical user (yes, I tested this with many users earlier) will hard reset the computer by pressing power button. Users are left unsure if installation was successful or failed, or if OS is in usable condition. Messed screen obscures the "Press ENTER to continue" message. Other keys don't seem to do anything. Should be easy to fix, as it works correctly on some earlier versions of Ubuntu. Also, image is displayed correctly in Hardy Beta on CD-ROM boot menu (syslinux?), Ubuntu loading (the orange progress indicator) and the text mode that is shown briefly before Ubuntu loading. Tested with Hardy Beta Desktop amd64, HP-Compaq dc7700, 19" flat panel. Details of the Hardy setup used for testing this bug: http://www.iki.fi/karvinen/ubuntu_hardy_8.04.html + + 8086:2992 VGA compatible controller: Intel Corporation 82Q963/Q965 + Integrated Graphics Controller (rev 02) ** Changed in: usplash (Ubuntu) Assignee: Saïvann Carignan (saivann) => (unassigned) Status: Incomplete => New ** Attachment added: "lspci.txt" http://launchpadlibrarian.net/15167173/lspci.txt -- [regression] Messed Screen Hides "Remove CD" Message After Install https://bugs.launchpad.net/bugs/218234 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238438] Sponsor Request
Michael: can you please take a look at it? -- Cache misspelled as "cash" in description of all packagekit packages https://bugs.launchpad.net/bugs/238438 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238696] Sponsor Request
Michael: can you please take a look at it? -- Please merge apt-build 0.12.32 (universe) from Debian unstable (main) https://bugs.launchpad.net/bugs/238696 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238767] [NEW] [Hardy] Cannot open audio file from Nautilus
Public bug reported: Binary package hint: nautilus When I try to open audio file (from audio cd) to Totem or Vlc I got an error. This same error happens at least in two different platforms. Totem => "Stream contains no data." Vlc => "Unable to open 'cdda://scd0/Track%201.wav'" $ vlc cdda:///scd0/Track%201.wav VLC media player 0.8.6e Janus [0292] main input error: no suitable access module for `cdda:///scd0/Track%201.wav' [0283] main playlist: nothing to play signal 2 received, terminating vlc - do it again in case it gets stuck [0283] main playlist: stopping playback However, directly opening vlc cdda:///dev/scd0 works fine. Also Rhythmbox can play these files. ** Affects: nautilus (Ubuntu) Importance: Undecided Status: New -- [Hardy] Cannot open audio file from Nautilus https://bugs.launchpad.net/bugs/238767 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238587] Re: PostgreSQL bug fix releases 8.3.3/8.2.9/8.1.13
dapper/8.1 update prepared. ** Changed in: postgresql-8.1 (Ubuntu Dapper) Importance: Undecided => High Assignee: (unassigned) => Martin Pitt (pitti) Status: New => In Progress -- PostgreSQL bug fix releases 8.3.3/8.2.9/8.1.13 https://bugs.launchpad.net/bugs/238587 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238766] Re: No DRI with ati radeon X700 and open source ati driver
xorg.conf to go with the log above also attached ** Attachment added: "xorg.conf" http://launchpadlibrarian.net/15167082/xorg.conf -- No DRI with ati radeon X700 and open source ati driver https://bugs.launchpad.net/bugs/238766 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238766] Re: No DRI with ati radeon X700 and open source ati driver
** Attachment added: "xorg log" http://launchpadlibrarian.net/15167072/Xorg.0.log -- No DRI with ati radeon X700 and open source ati driver https://bugs.launchpad.net/bugs/238766 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238766] [NEW] No DRI with ati radeon X700 and open source ati driver
Public bug reported: I haven't been able to get DRI to work with this card and the ati driver despite the fact that it's said to be supported. glxinfo | grep "direct rendering" gives direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose) LIBGL_DEBUG=verbose glxinfo gives no additional information (verbose hint seems to be ignored) lspci lists two PCI display devices as unknown devices: 01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 5657 01:00.1 Display controller: ATI Technologies Inc Unknown device 5677 Xorg.0.log makes so mention of any of these being recognized as an X700 which is what the card is supposed to contain. The only thing close is the excerpt below but that corresponds to one of the above devices and not what I was expecting anyway. (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found (--) Chipset ATI Radeon X550XTX (RV370) 5657 (PCIE) found Then I'm told later in the log that DRI has been disabled and that there are no DRI capable screens. The full xorg log is attached. ** Affects: xorg (Ubuntu) Importance: Undecided Status: New -- No DRI with ati radeon X700 and open source ati driver https://bugs.launchpad.net/bugs/238766 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 235282] Re: Every second number disappears in (tiny) dmesg output (in initrd.img)
> However, someone dislikes the way I wrote it, saying it is "if > speghetti code". (That's kind of how dmesg.c in util-linux does it > though...) > >http://www.zytor.com/pipermail/klibc/2008-May/002290.html My bad. That "someone" is Maximilian Attems, and I just realized he is the Debian maintainer of the klibc package, and he also promptly uploaded a fix too a few days ago. :-) Thanks to Maximilian's comment, we got hpa's own fix, which is much better. :-) Cheers, Anthony -- Every second number disappears in (tiny) dmesg output (in initrd.img) https://bugs.launchpad.net/bugs/235282 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238763] Re: fglrx X crash / restart
and here's /var/log/Xorg.0.log.old ** Attachment added: "Xorg.0.log.old" http://launchpadlibrarian.net/15167028/Xorg.0.log.old -- fglrx X crash / restart https://bugs.launchpad.net/bugs/238763 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238763] Re: fglrx X crash / restart
Here's /var/log/Xorg.0.log ** Attachment added: "Xorg.0.log" http://launchpadlibrarian.net/15167027/Xorg.0.log -- fglrx X crash / restart https://bugs.launchpad.net/bugs/238763 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238763] Re: fglrx X crash / restart
** Attachment added: "xorg.conf" http://launchpadlibrarian.net/15167003/xorg.conf -- fglrx X crash / restart https://bugs.launchpad.net/bugs/238763 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238763] [NEW] fglrx X crash / restart
Public bug reported: My X server crashed: the screen turned black, there were a few lines of ASCII output, and then a new X session (including logon) was created. syslog below. Hardware: Athlon X2, onboard ATI X1250 GPU, running Ubuntu 8.04 64-bit with proprietary video driver. [EMAIL PROTECTED]:~$ uname -a Linux ubuntu804 2.6.24-18-generic #1 SMP Wed May 28 19:28:38 UTC 2008 x86_64 GNU/Linux Jun 10 07:17:38 ubuntu804 kernel: [301868.943379] compiz.real[5916] trap stack segment rip:40fee0 rsp:7fff78f39340 error:0 Jun 10 07:17:39 ubuntu804 kernel: [301868.996095] npviewer.bin[5242]: segfault at f5b18030 rip f790c540 rsp ffac232c error 4 Jun 10 07:17:39 ubuntu804 gdm[5400]: WARNING: gdm_slave_xioerror_handler: Fatal X error - Restarting :0 Jun 10 07:17:41 ubuntu804 kernel: [301871.709731] [fglrx] PCIe has already been initialized. Reinitializing ... Jun 10 07:17:41 ubuntu804 kernel: [301871.715511] [fglrx] GART Table is not in FRAME_BUFFER range Jun 10 07:17:41 ubuntu804 kernel: [301871.715522] [fglrx] Reserve Block - 0 offset = 0X7ffc000 length = 0X4000 Jun 10 07:17:41 ubuntu804 kernel: [301871.715524] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X100 Jun 10 07:17:41 ubuntu804 kernel: [301871.769060] [fglrx] interrupt source 20008000 successfully enabled Jun 10 07:17:41 ubuntu804 kernel: [301871.769071] [fglrx] enable ID = 0x0008 Jun 10 07:17:41 ubuntu804 kernel: [301871.769080] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 Jun 10 07:17:41 ubuntu804 kernel: [301871.769142] [fglrx] interrupt source 1000 successfully enabled Jun 10 07:17:41 ubuntu804 kernel: [301871.769145] [fglrx] enable ID = 0x0009 Jun 10 07:17:41 ubuntu804 kernel: [301871.769149] [fglrx] Receive enable interrupt message with irqEnableMask: 1000 Jun 10 07:17:51 ubuntu804 pulseaudio[5433]: pid.c: Stale PID file, overwriting. [EMAIL PROTECTED]:~$ lspci -vvnn 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910] Subsystem: ASUSTeK Computer Inc. Unknown device [1043:826d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8231] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 13) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop+ ParErr+ Stepping+ SERR+ FastB2B+ Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ SERR+ 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia [1002:4383] Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
[Bug 54630] Re: Some *vlc not stopped by 'close window' button
I have the same problem in Vista with SP1, so I believe it may be a VLC problem and not an UBUNTU problem. -- Some *vlc not stopped by 'close window' button https://bugs.launchpad.net/bugs/54630 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 150073] Re: vnc4server only updates on mouse move
I beleive I have the same problem with 4.1.1+xorg1.0.2-0ubuntu7 (Hardy). If I did not move the mouse or typed anything on the keyboard all I got is a blank screen. The situation is the same if I connected to the vncserver locally. I use x11vnc as a workaround. -- vnc4server only updates on mouse move https://bugs.launchpad.net/bugs/150073 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238762] Re: zwnj character causes the cursor jump in kde
the same problem here. I should add this problem came after kde 3.5> and before this, it was OK. -- zwnj character causes the cursor jump in kde https://bugs.launchpad.net/bugs/238762 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218234] Re: [regression] Messed Screen Hides "Remove CD" Message After Install
I included a lot of command output in "Ubuntu Hardy 8.04 LTS", done with dc7700 that has the bug: http://myy.helia.fi/~karte/ubuntu_hardy_8_04.html#machinotero_-_hardware_and_software_details There are 'lspci', 'lspci -n' and 'lspci -v'. Do you still need 'sudo lspci -nnvv > lspci-nnvv.txt' you mentioned? -- [regression] Messed Screen Hides "Remove CD" Message After Install https://bugs.launchpad.net/bugs/218234 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 235662] Re: [Intrepid] usplash causing bios warnings when not used with quiet
Thanks for the verification. If you have time for it, it would be still appropriate to check the last drive with badblocks. Both new and very old hard drives are vulnerable to cluster damages. From now on, can you look if the problem can be reproduced is you remove both "splash" and "quiet" from the boot line? It would also be important to know if the BIOS error messages appears before or after the GRUB menu. If before, this is BIOS error messages, nothing to do with ubuntu, linux or splash. If this is after GRUB, this is linux kernel error messages concerning BIOS. "quiet" might only hide these error messages but not cause them. Can you also reproduce the problem and provide the files created by these commands in a terminal? dmesg < dmesg.log (if you associate some error messages with the outputs you see while the computer boots, it's a good idea to edit the file to point them) sudo lspci -nnvv > lspci-nnvv.log uname -a > uname.log cat /proc/version_signature > version.log cat /boot/grub/menu.lst > menu.lst -- [Intrepid] usplash causing bios warnings when not used with quiet https://bugs.launchpad.net/bugs/235662 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238403] ACK of sync request
ACKed. -- Please sync dtc 0.28.10-1 (universe) from Debian unstable (main) https://bugs.launchpad.net/bugs/238403 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 205018] Re: Hardy - Doesn't detect Firefox 3.0 for web searches and bookmarks
https://bugs.launchpad.net/ubuntu/+source/deskbar-applet/+bug/205018/comments/3 does it works? -- Hardy - Doesn't detect Firefox 3.0 for web searches and bookmarks https://bugs.launchpad.net/bugs/205018 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 235282] Re: Every second number disappears in (tiny) dmesg output (in initrd.img)
Hello Tim, Yes, upstream author "hpa" (H. Peter Anvin) happened to be on #etherboot, and he asked me to post the patch on klibc mailing list: http://www.zytor.com/pipermail/klibc/2008-May/002288.html However, someone dislikes the way I wrote it, saying it is "if speghetti code". (That's kind of how dmesg.c in util-linux does it though...) http://www.zytor.com/pipermail/klibc/2008-May/002290.html And the marvellous hpa promptly came up with something better, an easier-to-follow "state-machine-like approach": http://www.zytor.com/pipermail/klibc/2008-May/002289.html So yes, I'm very happy that hpa is so responsive, and I'm also very glad that you've already dealt with this issue in Ubuntu too. Many thanks, Tim and Steve! :-) Anthony -- Every second number disappears in (tiny) dmesg output (in initrd.img) https://bugs.launchpad.net/bugs/235282 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238640] Re: Please sync apcupsd-cgi (and it's apcupsd dependancy) 3.14.4-1 from debian sid main
According to https://launchpad.net/ubuntu/+source/apcupsd it's already in intrepid. Packages that have no Ubuntu changes are automatically synced until DebianImportFreeze. http://wiki.ubuntu.com/SyncRequestProcess ** Changed in: apcupsd (Ubuntu) Status: New => Fix Released -- Please sync apcupsd-cgi (and it's apcupsd dependancy) 3.14.4-1 from debian sid main https://bugs.launchpad.net/bugs/238640 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 222192] Re: Distorted sound after upgrade from Gutsy to Hardy
Exactly same happened to my sister after she upgraded her HP 530 from Gutsy to Hardy. Here's funny workaround: http://techreviews.in/distorted-sound-in-hardy- heron/ -- Distorted sound after upgrade from Gutsy to Hardy https://bugs.launchpad.net/bugs/222192 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238762] [NEW] zwnj character causes the cursor jump in kde
Public bug reported: Binary package hint: kedit zwnj(SHIFT+SPACE) is zero-width character that is used in Persian(Farsi) keyboard. It causes two parts of a word do not join together. for example: میرویم if the zwnj is not used the word would be like this: میرویم which is gramatically incorrect. The problem is that when typing zwnj in kde applications like kate, kedit , kwite, kbabel and etc. the cursor will jump from correct position in the text to another place in the line, which makes editing and selecting nearly impossible. Reproducible: Always Steps to Reproduce: 1.open kedit 2.switch to persian keyboard 3.write something with zwnj(SHIFT+space) between them 4.try to edit or select some part. Actual Results: cursor jumps to from current place to another part of the line. which makes editing text impossible. Expected Results: cursor should stay in it place like any other text editors. This bug exists in almost all of KDE text editing applications. ** Affects: kdeutils (Ubuntu) Importance: Undecided Status: New -- zwnj character causes the cursor jump in kde https://bugs.launchpad.net/bugs/238762 You received this bug notification because you are a member of Kubuntu Team, which is subscribed to kdeutils in ubuntu. -- kubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 238604] ACK of sync request
ACKed. -- Please sync python-4suite 1.0.2-5 (universe) from Debian unstable (main). https://bugs.launchpad.net/bugs/238604 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238575] Re: Possible invalid memory access in versions before 0.93.1
Does this means That I should redo the diff with the change ?? -- Possible invalid memory access in versions before 0.93.1 https://bugs.launchpad.net/bugs/238575 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 144585] Re: limit of 1024 files
There still seems to be a problem, also with v2.4.0 of libgphoto2. I have Hardy Heron and try to download pictures from Nicon Coolpix using gphoto2: 0.000429 main(2): gphoto2 2.4.0 0.000452 main(2): gphoto2 has been compiled with the following options: 0.000464 main(2): + gcc (C compiler used) 0.000475 main(2): + popt (mandatory, for handling command-line parameters) 0.000502 main(2): + exif (for displaying EXIF information) 0.000513 main(2): + cdk (for accessing configuration options) 0.000523 main(2): + no aa (for displaying live previews) 0.000536 main(2): + jpeg (for displaying live previews in JPEG format) 0.000558 main(2): + readline (for easy navigation in the shell) 0.000578 main(2): libgphoto2 2.4.0 0.000605 main(2): libgphoto2 has been compiled with the following options: 0.000616 main(2): + gcc (C compiler used) 0.000633 main(2): + ltdl (for portable loading of camlibs) 0.000644 main(2): + EXIF (for special handling of EXIF files) 0.000667 main(2): libgphoto2_port 0.8.0 0.000683 main(2): libgphoto2_port has been compiled with the following options: 0.000704 main(2): + gcc (C compiler used) 0.000715 main(2): + ltdl (for portable loading of camlibs) 0.000736 main(2): + USB (libusb, for USB cameras) 0.000748 main(2): + serial (for serial cameras) 0.000765 main(2): + no resmgr (serial port access and locking) 0.000787 main(2): + no baudboy (serial port locking) 0.000799 main(2): + no ttylock (serial port locking) 0.000814 main(2): + no lockdev (serial port locking) 0.000835 main(2): CAMLIBS env var not set, using compile-time default instead 0.000847 main(2): IOLIBS env var not set, using compile-time default instead 0.000897 setting/gphoto2-setting.c(2): Creating $HOME/.gphoto 0.001039 setting/gphoto2-setting.c(2): Loading settings from file "/home/jonas/.gphoto/settings" 0.001258 gp-camera(2): Freeing camera... 0.001284 gphoto2-port(2): Freeing port... 0.001302 libgphoto2/gphoto2-filesys.c(2): Clearing fscache LRU list... 0.001326 libgphoto2/gphoto2-filesys.c(2): fscache LRU list already empty 0.001341 gphoto2-filesystem(2): Internally deleting all folders from '/'... Actually I wanted to use gphoto2 for remote control of the camera. Would be happy if someone had a suggestion to how this problem could be solved -- limit of 1024 files https://bugs.launchpad.net/bugs/144585 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 233942] Re: genisoimage generates wrong DVD-Video images
genisoimage is only part of cdrkit. Same trick didn't helped me as well. Only full cdrkit install from sources. Maybe installing all binary packages, that builds from cdrkit source package may help. /me wonders is there any way to make ubuntu core developers aware of this really critical bug... 2008/6/9, bedege <[EMAIL PROTECTED]>: > All > > I have the same issue with genisoimage 1.1.6 on Xubuntu Hardy. > I've just installed genisoimage 1.1.7 (from a Debian package, with GDebi, > not from an Ubuntu repository) but it does not seem to solve the issue. I > recreated an iso file using k9copy, burned it to a DVD+RW, but still, it is > not recognized by Win XP. > Is genisoimage 1.1.7 enough to make the trick, or should I upgrade other > softs too (I do not really see the difference between cdrkit and > genisoimage...) > > -- > genisoimage generates wrong DVD-Video images > https://bugs.launchpad.net/bugs/233942 > You received this bug notification because you are a direct subscriber > of the bug. > -- genisoimage generates wrong DVD-Video images https://bugs.launchpad.net/bugs/233942 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236247] Re: HUAWEI ETS1000 CDMA modem doesn't work anymore in 8.04
** Changed in: linux (Ubuntu) Sourcepackagename: None => linux -- HUAWEI ETS1000 CDMA modem doesn't work anymore in 8.04 https://bugs.launchpad.net/bugs/236247 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236372] Re: SPDIF on hda-intel does not support more than two channels
** Changed in: pulseaudio (Ubuntu) Sourcepackagename: None => pulseaudio -- SPDIF on hda-intel does not support more than two channels https://bugs.launchpad.net/bugs/236372 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238760] [NEW] Ubuntu package missing dependancy on mythtv-transcode-utils
Public bug reported: Binary package hint: nuvexport nuvexport requires mythtranscode to run: [EMAIL PROTECTED]:~$ nuvexport You need mythtranscode in order to use nuvexport. Cleaning up temp files. [EMAIL PROTECTED]:~$ This is provided by the package mythtv-transcode-utils. lsb_release -rd Description:Ubuntu 8.04 Release:8.04 apt-cache policy nuvexport nuvexport: Installed: 0.21.0-0ubuntu1 Candidate: 0.21.0-0ubuntu1 Version table: *** 0.21.0-0ubuntu1 0 500 http://russianbride hardy/multiverse Packages 100 /var/lib/dpkg/status ** Affects: nuvexport (Ubuntu) Importance: Undecided Status: New -- Ubuntu package missing dependancy on mythtv-transcode-utils https://bugs.launchpad.net/bugs/238760 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238761] [NEW] bootcd 3.10 FTBFS due bashism
Public bug reported: Binary package hint: bootcd bootcd 3.10 FTBFS due bashism on: ./bootcdmk2diskconf -checktemplate ./bootcdmk2diskconf: 614: Syntax error: newline unexpected make[1]: *** [bootcdmk2diskconf] Error 2 make[1]: Leaving directory `/build/buildd/bootcd-3.10' make: *** [install] Error 2 dpkg-buildpackage: failure: /usr/bin/fakeroot debian/rules binary gave error exit status 2 ** Affects: bootcd (Ubuntu) Importance: Undecided Assignee: Nicolas Valcárcel (nxvl) (nvalcarcel) Status: Confirmed ** Changed in: bootcd (Ubuntu) Assignee: (unassigned) => Nicolas Valcárcel (nxvl) (nvalcarcel) ** Changed in: bootcd (Ubuntu) Status: New => Confirmed -- bootcd 3.10 FTBFS due bashism https://bugs.launchpad.net/bugs/238761 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 63450] Solution to Ricardo's problem (upgrading to Hardy)
See this page: (en español) http://www.ubuntu-es.org/index.php?q=node/86171#comment-258025 Or this: (in english) http://www.mail-archive.com/ubuntu-bugs@lists.ubuntu.com/msg874223.html it comes down to updating sysv-rc file to the default and last version from ubuntu distro: sudo apt-get install sysv-rc=2.86.ds1-14.1ubuntu45 and if needed then: sudo dpkg --configure -a -- acpid install fails (because of hal running) https://bugs.launchpad.net/bugs/63450 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 185852] Re: mpd ignores replaygain tags in flac files
** Changed in: mpd Status: Unknown => In Progress -- mpd ignores replaygain tags in flac files https://bugs.launchpad.net/bugs/185852 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 219630] Re: please add "geode" to driver list in hw/xfree86/common/xf86AutoConfig.c
PS: I forgot to mention that the way Debian and Ubuntu handle PCI ID matching seems to differ from upstream's intended method in some ways. Since finding out about this, I have produced two proposed fixes, both sitting in my PPA: 1) an updated -geode package that uses the Debian/Ubuntu-specific method. This package also moves the backward-compatibility symbolic links to the -amd transitional package, because they were found to cause more hard than good, but might still be useful to people initially upgrading from earlier Ubuntu releases that offered -amd. 2) an updated -nsc package that removes some PCI ID that conflict with the -cyrix and -geode packages. If accepted by the SRU team, I would propose that both be uploaded together into hardy-proposed and released with hardy.1 ASAP. -- please add "geode" to driver list in hw/xfree86/common/xf86AutoConfig.c https://bugs.launchpad.net/bugs/219630 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 225630] Re: Merge linkchecker 4.9-1 from Debian(Unstable)
Stefan: can you check why it fails to build? It could be a python- central problem. -- Merge linkchecker 4.9-1 from Debian(Unstable) https://bugs.launchpad.net/bugs/225630 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 231905] Re: 16-bit support missing
*** This bug is a duplicate of bug 114025 *** https://bugs.launchpad.net/bugs/114025 You did report the preloader error as is shown by the output in this bug description. Please read bug #114025 for more info on how it is the same issue. http://wiki.winehq.org/PreloaderPageZeroProblem explains this issue in more detail, and specifically provides the workaround. Please try the workaround and verify that it solves your issue. Any additional information should be provided in the original report, rather than this one. Thanks in advance! -- 16-bit support missing https://bugs.launchpad.net/bugs/231905 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236412] Re: [hardy] system freeze when starting X (msi nx8800gt)
** Changed in: jockey (Ubuntu) Sourcepackagename: None => jockey -- [hardy] system freeze when starting X (msi nx8800gt) https://bugs.launchpad.net/bugs/236412 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236413] Re: IDE hard drive stops working after a while, I/O error
Thank you for taking the time to report this bug and helping to make Ubuntu better. Unfortunately we can't fix it, because your description does not yet have enough information. Please include the following additional information, if you have not already done so (pay attention to lspci's additional options), as required by the Ubuntu Kernel Team: 1. Please include the output of the command "uname -a" in your next response. It should be one, long line of text which includes the exact kernel version you're running, as well as the CPU architecture. 2. Please run the command "dmesg > dmesg.log" after a fresh boot and attach the resulting file "dmesg.log" to this bug report. 3. Please run the command "sudo lspci -vvnn > lspci-vvnn.log" and attach the resulting file "lspci-vvnn.log" to this bug report. For your reference, the full description of procedures for kernel- related bug reports is available at [WWW] https://wiki.ubuntu.com/KernelTeamBugPolicies Thanks in advance! ** Changed in: linux (Ubuntu) Sourcepackagename: None => linux Status: New => Incomplete -- IDE hard drive stops working after a while, I/O error https://bugs.launchpad.net/bugs/236413 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238716] Re: Close, maximize and minimize on right side of window title bar missing
which three icons some more info. is appreciated. ** Changed in: ubuntu-meta (Ubuntu) Status: New => Incomplete -- Close, maximize and minimize on right side of window title bar missing https://bugs.launchpad.net/bugs/238716 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238759] [NEW] Ubuntu package missing dependency on libmyth-perl
Public bug reported: Binary package hint: nuvexport The nuvexport program requires MythTV.pm to run. This is provided by the package libmyth-perl, but is not marked as a dependency of nuvexport. lsb_release -rd Description: Ubuntu 8.04 Release: 8.04 apt-cache policy nuvexport nuvexport: Installed: 0.21.0-0ubuntu1 Candidate: 0.21.0-0ubuntu1 ** Affects: nuvexport (Ubuntu) Importance: Undecided Status: New -- Ubuntu package missing dependency on libmyth-perl https://bugs.launchpad.net/bugs/238759 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 211399] Re: update-manager crashed with SIGSEGV
Thanks for taking the time to report this bug and helping to make Ubuntu better. Could you please add the log files from '/var/log/dist-upgrade/' to this bug report as attachments? Thanks in advance. ** Changed in: update-manager (Ubuntu) Status: New => Incomplete -- update-manager crashed with SIGSEGV https://bugs.launchpad.net/bugs/211399 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 212020] Re: update-manager crashed with SIGSEGV in PyThread_release_lock()
Thanks for taking the time to report this bug and helping to make Ubuntu better. Could you please add the log files from '/var/log/dist-upgrade/' to this bug report as attachments? Thanks in advance. ** Changed in: update-manager (Ubuntu) Status: New => Incomplete -- update-manager crashed with SIGSEGV in PyThread_release_lock() https://bugs.launchpad.net/bugs/212020 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 235679] Re: Asks for same password twice
Let's just skip the geekspeak. Unbuntu 8.04 simply will not boot passwords. I have uninstalled and reinstalled. I have no more time to waste on this. It does not matter if terminal or normal login mode is used, UBUNTU 8.04 simply does not allow log-ins. This is Betaware, or maybe even Malware. 7.10 never had these problems. 8.04 is garbageware. -- Asks for same password twice https://bugs.launchpad.net/bugs/235679 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236417] Re: file permissions resets after restart
Thank you for taking the time to report this bug and helping to make Ubuntu better. Unfortunately we can't fix it, because your description didn't include enough information. You may find it helpful to read "How to report bugs effectively" [WWW] http://www.chiark.greenend.org.uk/~sgtatham/bugs.html. We'd be grateful if you would then provide a more complete description of the problem. We have instructions on debugging some types of problems at [WWW] http://wiki.ubuntu.com/DebuggingProcedures At a minimum, we need: 1. the specific steps or actions you took that caused you to encounter the problem, 2. the behavior you expected, and 3. the behavior you actually encountered (in as much detail as possible). Thanks! ** Changed in: ubuntu Status: New => Incomplete -- file permissions resets after restart https://bugs.launchpad.net/bugs/236417 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236420] Re: Gnome Freeze on Exit
Thank you for taking the time to report this bug and helping to make Ubuntu better. Unfortunately we can't fix it, because your description didn't include enough information. You may find it helpful to read "How to report bugs effectively" [WWW] http://www.chiark.greenend.org.uk/~sgtatham/bugs.html. We'd be grateful if you would then provide a more complete description of the problem. We have instructions on debugging some types of problems at [WWW] http://wiki.ubuntu.com/DebuggingProcedures At a minimum, we need: 1. the specific steps or actions you took that caused you to encounter the problem, 2. the behavior you expected, and 3. the behavior you actually encountered (in as much detail as possible). Thanks! ** Changed in: linux (Ubuntu) Sourcepackagename: None => linux Status: New => Incomplete -- Gnome Freeze on Exit https://bugs.launchpad.net/bugs/236420 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 219630] Re: please add "geode" to driver list in hw/xfree86/common/xf86AutoConfig.c
Steve, my understanding is that David Bensimon at Canonical has been testing for various Geode issues. He might be able to answer this. -- please add "geode" to driver list in hw/xfree86/common/xf86AutoConfig.c https://bugs.launchpad.net/bugs/219630 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236436] Re: system freezes by various occasions, very often when using update package manager
Thank you for taking the time to report this bug and helping to make Ubuntu better. Unfortunately we can't fix it, because your description does not yet have enough information. Please include the following additional information, if you have not already done so (pay attention to lspci's additional options), as required by the Ubuntu Kernel Team: 1. Please include the output of the command "uname -a" in your next response. It should be one, long line of text which includes the exact kernel version you're running, as well as the CPU architecture. 2. Please run the command "dmesg > dmesg.log" after a fresh boot and attach the resulting file "dmesg.log" to this bug report. 3. Please run the command "sudo lspci -vvnn > lspci-vvnn.log" and attach the resulting file "lspci-vvnn.log" to this bug report. For your reference, the full description of procedures for kernel- related bug reports is available at [WWW] https://wiki.ubuntu.com/KernelTeamBugPolicies Thanks in advance! ** Changed in: compiz-fusion-bcop (Ubuntu) Sourcepackagename: None => compiz-fusion-bcop Status: New => Incomplete -- system freezes by various occasions, very often when using update package manager https://bugs.launchpad.net/bugs/236436 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236449] Re: In Hardy Mouse pointer dissapears when laptop lid is closed.
Thank you for taking the time to report this bug and helping to make Ubuntu better. Please attach your X server configuration file (/etc/X11/xorg.conf) and X server log file (/var/log/Xorg.0.log) to the bug report as individual uncompressed file attachments using the "Attachment:" box below. ** Changed in: xorg (Ubuntu) Sourcepackagename: None => xorg Status: New => Incomplete -- In Hardy Mouse pointer dissapears when laptop lid is closed. https://bugs.launchpad.net/bugs/236449 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89945] Re: scp doesn't report correct filenames with spaces in verbose mode
I'm still experiencing this bug. -- scp doesn't report correct filenames with spaces in verbose mode https://bugs.launchpad.net/bugs/89945 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 185852] Re: mpd ignores replaygain tags in flac files
** Bug watch added: MPD Mantis #1616 http://musicpd.org/mantis/view.php?id=1616 ** Also affects: mpd via http://musicpd.org/mantis/view.php?id=1616 Importance: Unknown Status: Unknown ** Changed in: mpd (Ubuntu) Status: Incomplete => Confirmed -- mpd ignores replaygain tags in flac files https://bugs.launchpad.net/bugs/185852 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218504] Re: bug in update manager
Thanks for your bug report. In /var/log/dist-upgrade/, there should be two other files called main.log and term.log. Please attach those to this bug report. thanks in advance. ** Changed in: update-manager (Ubuntu) Status: New => Incomplete -- bug in update manager https://bugs.launchpad.net/bugs/218504 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 231905] Re: 16-bit support missing
*** This bug is a duplicate of bug 114025 *** https://bugs.launchpad.net/bugs/114025 Well - I didn't report a preloader error - I reported that 16bit support is non-functional. If you believe they are the same bug, make sure to test with a 16bit windows application before marking this as fixed. -- 16-bit support missing https://bugs.launchpad.net/bugs/231905 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236463] Re: During install of 8.04, PC freezes at Broadcom WIFI chipset
Thank you for taking the time to report this bug and helping to make Ubuntu better. Unfortunately we can't fix it, because your description does not yet have enough information. Please include the following additional information, if you have not already done so (pay attention to lspci's additional options), as required by the Ubuntu Kernel Team: 1. Please include the output of the command "uname -a" in your next response. It should be one, long line of text which includes the exact kernel version you're running, as well as the CPU architecture. 2. Please run the command "dmesg > dmesg.log" after a fresh boot and attach the resulting file "dmesg.log" to this bug report. 3. Please run the command "sudo lspci -vvnn > lspci-vvnn.log" and attach the resulting file "lspci-vvnn.log" to this bug report. For your reference, the full description of procedures for kernel- related bug reports is available at [WWW] https://wiki.ubuntu.com/KernelTeamBugPolicies Thanks in advance! ** Changed in: linux (Ubuntu) Sourcepackagename: None => linux Status: New => Incomplete -- During install of 8.04, PC freezes at Broadcom WIFI chipset https://bugs.launchpad.net/bugs/236463 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236487] Re: package linux-image-2.6.24-17-generic None [modified: /var/lib/dpkg/info/linux-image-2.6.24-17-generic.list] failed to install/upgrade: files list file for package `rdiff-backup' is m
** Changed in: rdiff-backup (Ubuntu) Sourcepackagename: None => rdiff-backup ** Summary changed: - package linux-image-2.6.24-17-generic None [modified: /var/lib/dpkg/info/linux-image-2.6.24-17-generic.list] failed to install/upgrade: files list file for package `rdiff-backup' is missing final newline + `rdiff-backup' is missing final newline -- `rdiff-backup' is missing final newline https://bugs.launchpad.net/bugs/236487 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236495] Re: When shutting down the computer, the screen brightness should be reset
** Changed in: acpi-support (Ubuntu) Sourcepackagename: None => acpi-support -- When shutting down the computer, the screen brightness should be reset https://bugs.launchpad.net/bugs/236495 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218591] Re: 7.04 - 7.10 upgrade fails (Could not calculate upgrade)
Thanks for taking the time to report this bug and helping to make Ubuntu better. Could you please add the log files from '/var/log/dist-upgrade/' as separate attachments to this bug report as attachments? Thanks in advance. ** Changed in: update-manager (Ubuntu) Status: New => Incomplete ** Tags added: feisty2gutsy -- 7.04 - 7.10 upgrade fails (Could not calculate upgrade) https://bugs.launchpad.net/bugs/218591 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 222024] Re: Upgrade from 7.04 to 7.10 stops on 2nd step (Modifying the software channels)
Thanks for your report. ** Changed in: update-manager (Ubuntu) Status: New => Confirmed ** Tags added: feisty2gutsy -- Upgrade from 7.04 to 7.10 stops on 2nd step (Modifying the software channels) https://bugs.launchpad.net/bugs/222024 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 225816] Re: cdrom upgrade crashes in DistUpgradeViewKDE
** Tags added: cdrom-upgrade ** Tags removed: dapper2hardy -- cdrom upgrade crashes in DistUpgradeViewKDE https://bugs.launchpad.net/bugs/225816 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236507] Re: Extreme lags in Hardy Heron
Thank you for taking the time to report this bug and helping to make Ubuntu better. Please answer these questions: * Is this reproducible? * If so, what specific steps should we take to recreate this bug? This will help us to find and resolve the problem. ** Changed in: gnome-power-manager (Ubuntu) Sourcepackagename: None => gnome-power-manager Status: New => Incomplete -- Extreme lags in Hardy Heron https://bugs.launchpad.net/bugs/236507 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236971] Re: xorg memory leak (not compiz, not pixmap) with intel gm
I am also observing the same, I too have intel gma, chipset 965. I will wait till tomorrow as I am sure the memory of xorg goes up when the laptop is running overnight. I have to restart the xserver to reduce the memory usage. I leave it on overnight with no app running (except for those sitting in the system tray). -- xorg memory leak (not compiz, not pixmap) with intel gm https://bugs.launchpad.net/bugs/236971 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238256] Re: Firefox 3.0 freezes on hardy heron
Hello everyone > st33med This is the link: http://www.free-tv-video-online.info/player/tudou.php?id=fJkdgkf1yPY >Alexander - I am new to Linux - not sure on how to manipulate or ID firefox's internal "chemistry", s2s(so to speak). -- Firefox 3.0 freezes on hardy heron https://bugs.launchpad.net/bugs/238256 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238757] Re: Typo in ubuntu-doc administrative.xml
** Attachment added: "diff-administrative-administrative.xml.txt" http://launchpadlibrarian.net/15166189/diff-administrative-administrative.xml.txt ** Also affects: ubuntu-doc Importance: Undecided Status: New ** Changed in: ubuntu-doc Importance: Undecided => Low Status: New => Confirmed ** Changed in: ubuntu-docs (Ubuntu) Status: New => Confirmed -- Typo in ubuntu-doc administrative.xml https://bugs.launchpad.net/bugs/238757 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238757] [NEW] Typo in ubuntu-doc administrative.xml
Public bug reported: Binary package hint: ubuntu-docs source document: ubuntu-doc/administrative.administrative.xml attached patch corrects typo "accidently" to correct spelling "accidentally" ** Affects: ubuntu-doc Importance: Low Status: Confirmed ** Affects: ubuntu-docs (Ubuntu) Importance: Undecided Status: Confirmed -- Typo in ubuntu-doc administrative.xml https://bugs.launchpad.net/bugs/238757 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs