[Bug 280916] Re: Graphical Glitches with xserver-xorg-video-radeon
** Attachment added: "xorg.conf" http://launchpadlibrarian.net/19054076/xorg.conf -- Graphical Glitches with xserver-xorg-video-radeon https://bugs.launchpad.net/bugs/280916 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 280916] Re: Graphical Glitches with xserver-xorg-video-radeon
** Attachment added: "Xorg log" http://launchpadlibrarian.net/19054056/Xorg.0.log -- Graphical Glitches with xserver-xorg-video-radeon https://bugs.launchpad.net/bugs/280916 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 280916] Re: Graphical Glitches with xserver-xorg-video-radeon
** Attachment added: "Output from lspci -vvnn" http://launchpadlibrarian.net/19054047/lspci.txt -- Graphical Glitches with xserver-xorg-video-radeon https://bugs.launchpad.net/bugs/280916 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 280916] Re: Graphical Glitches with xserver-xorg-video-radeon
** Attachment added: "screenpic.jpg" http://launchpadlibrarian.net/18375372/screenpic.jpg -- Graphical Glitches with xserver-xorg-video-radeon https://bugs.launchpad.net/bugs/280916 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 280916] [NEW] Graphical Glitches with xserver-xorg-video-radeon
Public bug reported: Binary package hint: xserver-xorg-video-radeon On my Dual screen setup i have graphical glitches with my mousepointer on the left screen. Please view the attached picture for an example of mousepointer corruption, sofar it seems to only happen on the left side of the left screen, and only over several virtical colums. [EMAIL PROTECTED]:~$ lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) 00:03.0 Communication controller: Intel Corporation 82G33/G31/P35/P31 Express MEI Controller (rev 02) 00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit Network Connection (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc RV570 [Radeon X1950 Pro] 01:00.1 Display controller: ATI Technologies Inc RV570 [Radeon X1950 Pro] (secondary) 04:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface (rev b1) 07:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 07:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 07:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70) ** Affects: xserver-xorg-video-ati (Ubuntu) Importance: Undecided Status: New -- Graphical Glitches with xserver-xorg-video-radeon https://bugs.launchpad.net/bugs/280916 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 280413] Re: RadeonHD X1950 Performance & Display issue's
** Attachment added: "Xorg.0.log.old" http://launchpadlibrarian.net/18346523/Xorg.0.log.old -- RadeonHD X1950 Performance & Display issue's https://bugs.launchpad.net/bugs/280413 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 280413] Re: RadeonHD X1950 Performance & Display issue's
** Attachment added: "xorg.conf" http://launchpadlibrarian.net/18346509/xorg.conf -- RadeonHD X1950 Performance & Display issue's https://bugs.launchpad.net/bugs/280413 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 280413] [NEW] RadeonHD X1950 Performance & Display issue's
Public bug reported: The current version of RadeonHD (1.2.1 build2) supports the Radeon X1950, however, on my system this does not produce the desired result. When setting my xorg.conf file to use the "radeonhd" driver, my system no longer recognises the resolution of both my displays, there is no 3D accelleration and the performance of the driver is lacking. lspci output: [EMAIL PROTECTED]:~$ lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) 00:03.0 Communication controller: Intel Corporation 82G33/G31/P35/P31 Express MEI Controller (rev 02) 00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit Network Connection (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc RV570 [Radeon X1950 Pro] 01:00.1 Display controller: ATI Technologies Inc RV570 [Radeon X1950 Pro] (secondary) 04:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface (rev b1) 07:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 07:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 07:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70) ** Affects: xserver-xorg-video-radeonhd (Ubuntu) Importance: Undecided Status: New -- RadeonHD X1950 Performance & Display issue's https://bugs.launchpad.net/bugs/280413 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 188478] Re: Hardware issue's resolving bt878 & recent kernels
Kit has been scrapped, no longer able to test -- Hardware issue's resolving bt878 & recent kernels https://bugs.launchpad.net/bugs/188478 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 92665] Re: Herd 5 booting on a Compaq nx7400 fails
Issue was resolved with final release -- Herd 5 booting on a Compaq nx7400 fails https://bugs.launchpad.net/bugs/92665 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 263555] Re: [intrepid] 2.6.27 e1000e driver places Intel ICH8 and ICH9 gigE chipsets at risk
Hi, Quoting vjohn <[EMAIL PROTECTED]>: > Hi people, sorry by angry message, but I'm realy needing my onboard > network working in gnu/linux... Yesterday I have installed m$ > windows in my machine to test the onboard network card (for > something it's work! hehe) You definatly should *NOT* be running Alpha or Beta software on a work-critical machine, the workarround is to install an older kernel, see the big warning topic on the forums. (http://ubuntuforums.org/showpost.php?p=5882185&postcount=38) > and it work fine in windows... only in linux box have the "The NVM > Checksum Is Not Valid"... So the network card remain working... Of > course the gnu/linux is develloped by humans, but the kernel team > need do more testing in new releases, What do you think the point is of Beta & Alpha releases? To test the code on a larger ecosystem containing alot more diverse hardware, the whole discussion is pointless anyway, people clearly don't read warnings or even solutions when they're staring them in the face. > because have a great responsability in thousands machines runing > this great operating system! > Thanks a lot and I will wait the solution, when it appear... > Vinicius If my reply sounds abit bitter, it's probably because i am, there's been alot of whining & wailing about how they were supposed to do this & that & pull iso's etc etc etc etc ad infinitum, blah -- [intrepid] 2.6.27 e1000e driver places Intel ICH8 and ICH9 gigE chipsets at risk https://bugs.launchpad.net/bugs/263555 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 33269] Re: root filesystem fails to mount (sata_nv module is loaded)
I replaced the machine with said controller for some new kit, can't test if this issue still exist. -- root filesystem fails to mount (sata_nv module is loaded) https://bugs.launchpad.net/bugs/33269 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 188478] Re: Hardware issue's resolving bt878 & recent kernels
Whoops, wrong lspci output: 06:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver) Flags: bus master, medium devsel, latency 32, IRQ 20 Memory at 50001000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 06:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, audio section) Flags: medium devsel, IRQ 20 Memory at 5000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 -- Hardware issue's resolving bt878 & recent kernels https://bugs.launchpad.net/bugs/188478 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 188478] [NEW] Hardware issue's resolving bt878 & recent kernels
Public bug reported: Binary package hint: linux-image The recent versions of linux have an incompability with PinnacleSys PCTV Studio/Rave PCI tv-tuner cards. There are currently two issue's, inability to select/scan tv-channels, for which there is a work-arround (mentioned later in this post). The second issue sofar has proven to be more challenging, the bt878 module is unable to properly recognise the sound-componant of the PCI device, older kernels, like the dapper kernels, work properly, and bt878 works perfectly on those kernels. - lspci output: 06:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, audio section) Flags: medium devsel, IRQ 20 Memory at 5000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 06:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70) (prog-if 10 [OHCI]) Subsystem: Agere Systems FW323 Flags: bus master, fast Back2Back, medium devsel, latency 32, IRQ 19 Memory at 5010 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 dmesg | grep bt: [ 41.508703] bttv: driver version 0.9.17 loaded [ 41.508705] bttv: using 4 buffers with 2080k (520 pages) each for capture [ 41.508748] bttv: Bt8xx card found (0). [ 41.508771] bttv0: Bt878 (rev 17) at :06:00.0, irq: 20, latency: 32, mmio: 0x50001000 [ 41.508777] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 [ 41.508779] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,insmod option] [ 41.508781] bttv0: gpio config override: mask=0x1, mux=0x1,0x1,0x1,0x1 [ 41.508802] bttv0: gpio: en=, out= in=00ff67ff [init] [ 41.509139] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 41.509733] bttv0: miro: id=25 tuner=1 radio=no stereo=no [ 41.509735] bttv0: tuner type=33 [ 41.509736] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 41.510332] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 41.511157] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 41.721720] tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw]) [ 41.918577] bttv0: registered device video0 [ 41.918590] bttv0: registered device vbi0 [ 41.918610] bttv0: PLL: 28636363 => 35468950 .. ok [ 41.972211] bt878: AUDIO driver version 0.0.0 loaded [ 42.012415] bt878: Bt878 AUDIO function found (0). [ 42.012434] bt878_probe: card id=[0x1211bd], Unknown card. [ 42.012441] bt878: probe of :06:00.1 failed with error -22 work-arround for channel issue: Add the following to /etc/modprobe.d/options: options bttv radio=0 card=39 tuner=33 gbuffers=4 ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- Hardware issue's resolving bt878 & recent kernels https://bugs.launchpad.net/bugs/188478 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 95318] Re: F-spot stuck in infinite loop
@Gerard I'm afraid you're having a different issue then i was, and it doesn't seem related to the missing tags table as the other bug mentioned, you could try renaming the database file to see if f-spot can make a new file, if that works, you might have to dump your old table to text & import the text file into a new database file. -- F-spot stuck in infinite loop https://bugs.launchpad.net/bugs/95318 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 95280] Re: Feisty Beta Installs ok, doesn't boot
Latest updates seem to have resolved the issue for me. -- Feisty Beta Installs ok, doesn't boot https://bugs.launchpad.net/bugs/95280 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 81905] Re: [feisty] f-spot does not start
Your problems are with the old f-spot database, you seem to be lacking the table "tags". Do this: Go to the terminal, and type in the following command: sqlite ~/.gnome2/f-spot/photos.db You'll get an sql prompt, at this prompt type: .tables You should get a list of all tables present in the database, on my system, this is my output: [EMAIL PROTECTED]:/$ sqlite ~/.gnome2/f-spot/photos.db SQLite version 2.8.17 Enter ".help" for instructions sqlite> .tables exports metaphoto_versions tags imports photo_tags photos sqlite> Notice the presence of the table "tags", if you lack this table, you should be able to add it sqlite. this is what the table should be: TABLE tags ( idINTEGER PR IMARY KEY NOT NULL, name TEXT UNIQUE,cate gory_id INTEGER,is_category BOOLEAN, sort_priority INTEGER, icon TEXT ); Notice that you'll need sqlite and not sqlite3 -- [feisty] f-spot does not start https://bugs.launchpad.net/bugs/81905 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 95318] Re: F-spot stuck in infinite loop
Fixed it here by installing sqlite, on which f-spot seems to rely on my end. Should this be a dependency? -- F-spot stuck in infinite loop https://bugs.launchpad.net/bugs/95318 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 95280] Re: Feisty Beta Installs ok, doesn't boot
Nope, it still doesn't work, the module for the sata controller doesn't get loaded, i have to run /scripts/init-premount/udev by hand, only then do i get access to the disk & the lvm volumes. After mounting the root fs to /root and killing udev can i resume booting. -- Feisty Beta Installs ok, doesn't boot https://launchpad.net/bugs/95280 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 95280] Re: Feisty Beta Installs ok, doesn't boot
Managed to get rid of the infinite loop complaining about a bad superblock on /dev/hda, now it just loops happilly saying the md device already has it's disks. I suppose this means it's atleast assembling the raid. I found an upstream bugreport about a simular issue that's apperently already solved in debian, this is the link: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=396582 -- Feisty Beta Installs ok, doesn't boot https://launchpad.net/bugs/95280 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 75681] Re: boot-time race condition initializing md
My bugreport might be related to this one, Bug #95280. (https://launchpad.net/ubuntu/+bug/95280) -- boot-time race condition initializing md https://launchpad.net/bugs/75681 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 95280] Re: Feisty Beta Installs ok, doesn't boot
Some more tests, i undid all my modifications to the initramfs scripts in /etc and /usr and let the system boot. I get tossed into the initramfs box, i check for the presence of my disks in /dev I load the kernel modules if they are not present i execute ./scripts/local-top/mdadm After that last command i get tossed into an infinite loop where it complains about the superblock on /dev/hda. I've also found another bugreport that's rather simular to what i'm experiancing: Bug #75681: -- Feisty Beta Installs ok, doesn't boot https://launchpad.net/bugs/95280 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 95280] Re: Feisty Beta Installs ok, doesn't boot
Wrong bug, i meant bug #76708 -- Feisty Beta Installs ok, doesn't boot https://launchpad.net/bugs/95280 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 95280] Re: Feisty Beta Installs ok, doesn't boot
I've been doing more tests on another (less critical) machine, i believe it's related to bug #95318. I've encountered the following problems on said system: - The modules for the ide & sata controllers were not loaded during boot - mdadm didn't detect the raid device present on hda and hdb - lvm doesn't get loaded - I managed to resolve the missing modules by editing /etc/initramfs-tools/modules - After resolving the missing modules, mdadm was able to build the array - I've yet to succeed in getting lvm to initialise, there is no lvm script present in the initramfs ramdisk. -- Feisty Beta Installs ok, doesn't boot https://launchpad.net/bugs/95280 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 95318] Re: F-spot stuck in infinite loop
The machine is running Feisty Fawn beta, and is up to date. The f-spot database comes from a previous edgy install (/ and /home are 2 seperate partitions). I'm not sure how i can provide you with more info, since the application doesn't crash (so no coredump), it just can't connect to d-bus -- F-spot stuck in infinite loop https://launchpad.net/bugs/95318 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 95280] Re: Feisty Beta Installs ok, doesn't boot
Well, seems it still doesn't boot like it should, 1 out of 10 boots it'll start up, the other times it won't. Sometimes i see my HD, sometimes i don't. When i do see the HD and reboot one more time it seems to boot up properly, testing the same machine with edgy works perfectly, so i doubt it's a hw issue. -- Feisty Beta Installs ok, doesn't boot https://launchpad.net/bugs/95280 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 95280] Re: Feisty Beta Installs ok, doesn't boot
Managed to get it to boot in the following order: - Install a minimal system - When the installer asks for the proxy, press - Mount your system & proc, then chroot into it - edit /etc/initramfs-tools/modules - add the following lines: libata pata_jmicron ata_piix ahci ata_generic - execute update-initramfs -u - Exit the chroot - Resume the install (press ) - Reboot At this point the computer booted, and i did apt-get install ubuntu-desktop. After this,i rebooted, and the system was unbootable again, i had to edit /etc.lilo.conf to set the root location to the LVM2 notition instead of the usual /dev/mapper way of doing it. -- Feisty Beta Installs ok, doesn't boot https://launchpad.net/bugs/95280 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 95318] F-spot stuck in infinite loop
Public bug reported: Binary package hint: f-spot Unable to launch f-spot, this is what i get from the console: Cant' get a connection to the dbus. Trying again... Starting new FSpot server Cant' get a connection to the dbus. Trying again... Starting new FSpot server Cant' get a connection to the dbus. Trying again... Starting new FSpot server Cant' get a connection to the dbus. Trying again... Starting new FSpot server Cant' get a connection to the dbus. Trying again... Starting new FSpot server This keeps repeating untill i press libdb3 is installed ** Affects: f-spot (Ubuntu) Importance: Undecided Status: Unconfirmed -- F-spot stuck in infinite loop https://launchpad.net/bugs/95318 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 95280] Feisty Beta Installs ok, doesn't boot
Public bug reported: I tested the latest beta release for Feisty Fawn, i installed using the alternative CD, installation on a SATA disk with LVM2 layout works properly, installation went without a glitch. Rebooting after install results in a failed boot, and the user is dropped into the initramfs box, seems the lvm partitions don't get mounted. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- Feisty Beta Installs ok, doesn't boot https://launchpad.net/bugs/95280 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 92645] Re: Herd 5 Alternative CD fails to detect configured md raid device
I'll have to check, i think it gets loaded as soon as you select "Configure RAID devices" tho, when partitioning manually. The /dev/md/0 error only appears *after* i goto the Configure raid section, prior to doing that i can still go back & forth between "detecting disks" and "partitioning", as soon as i accessed "Configure RAID" i am unable to do so without getting the /dev/md/0 error. I hope this post makes sense, if not, let me know & i'll clarify some more ;) -- Herd 5 Alternative CD fails to detect configured md raid device https://launchpad.net/bugs/92645 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 92665] Herd 5 booting on a Compaq nx7400 fails
Public bug reported: Binary package hint: initramfs-tools Installing Feisty Herd 5 on an HP/Compaq nx7400 laptop seems to work, partitioning, installing packages and bootloader all work, but after the first stage of installation, and the system reboots, the kernel will not find the root device. This machine uses a sata disk. ** Affects: initramfs-tools (Ubuntu) Importance: Undecided Status: Unconfirmed -- Herd 5 booting on a Compaq nx7400 fails https://launchpad.net/bugs/92665 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 92645] Herd 5 Alternative CD fails to detect configured md raid device
Public bug reported: I have a system that was setup with Edgy to use md raid1 (mirroring) and on top of the raid device, i use lvm2, with two partitions, the / filesystem and /home. When i attempt to install herd 5 on that system, it fails to detect the already configured raid device (/dev/md0), going to "configure RAID" will offer the choice to create or delete md devices, at this point, if you select "Finish" without changing anything, or choose "Go Back", the installer will fail with the error "Could not stat /dev/md/0 - No such file or directory". Status of the lvm device recognition is unknown, nor do i know if it actually has any connections to lvm2, running lvm vgscan from one of the consoles after the above error does show the vg device. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- Herd 5 Alternative CD fails to detect configured md raid device https://launchpad.net/bugs/92645 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs