[Bug 1966007] Re: Flood of Bluetooth Malicious advertisind data
The `gnome-terminal` is not affected by the kernel's Bluetooth issue... ** Package changed: gnome-terminal (Ubuntu) => linux-signed (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1966007 Title: Flood of Bluetooth Malicious advertisind data To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-signed/+bug/1966007/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1824874] Re: undismissable, unclickable authentication dialog left on screen (top-left corner) after policykit authentication [pushModal: invocation of begin_modal failed]
How do I figure out which application tripped the policy and then resulted in the dialog? In my case the unclickable dialog happens on my Desktop PC booting into my Ubuntu 20.04. No VM, no remote connection, no xRPD involved, no new software installed, no torrents, and downloaded nothing. I have several virtual networks created by docker, but this setup worked for years until a few days ago. The only change was that I added a new SSD to the system on top of existing ones, formatted to ext4, but it's not even in fstab yet. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1824874 Title: undismissable, unclickable authentication dialog left on screen (top- left corner) after policykit authentication [pushModal: invocation of begin_modal failed] To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1824874/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1876157] Re: Memtest86+ in Ubuntu 20.04 doesn't work, switch to Coreboot branch or package new release v5.31b is available since 12/04/2020
I have the same issue as comment #6 on Ubuntu Server 20.04.1 installer that booted from a flash drive. HW: 00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07) 00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 630 (Desktop) 00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10) 00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10) 00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10) 00:17.0 SATA controller: Intel Corporation Cannon Lake PCH SATA AHCI Controller (rev 10) 00:1c.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #3 (rev f0) 00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0) 00:1d.2 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #11 (rev f0) 00:1d.3 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #12 (rev f0) 00:1f.0 ISA bridge: Intel Corporation H370 Chipset LPC/eSPI Controller (rev 10) 00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10) 00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10) 02:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983 03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 04) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1876157 Title: Memtest86+ in Ubuntu 20.04 doesn't work, switch to Coreboot branch or package new release v5.31b is available since 12/04/2020 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/memtest86+/+bug/1876157/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1910115] [NEW] package runit 2.1.2-3ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: Dear Sirs! On the summer of 2010 I tried to install MS Visual Studio (linux) SDK (64bit) software and it faild with the ruit error. Sorry I have 32bit machine (dell latitude d410). From that time on every ubuntu 16.04 LTS update (if actually was something) then it stops with this error and asks for something new? setup. I start the setup window and look threw it without any change and close it. The update procss successfully finished, the OS got the updates and operates well without any symptomes, but on the next updates everything repeats once again, in the end operating well. Thanks, sincerelly, Andras Bodor U.i. The bug by me is not a security bug! It is a missinstallation by me. ProblemType: Package DistroRelease: Ubuntu 16.04 Package: runit 2.1.2-3ubuntu1 ProcVersionSignature: Ubuntu 4.4.0-197.229-generic 4.4.241 Uname: Linux 4.4.0-197-generic i686 ApportVersion: 2.20.1-0ubuntu2.28 Architecture: i386 Date: Mon Jan 4 16:20:26 2021 Dependencies: fgetty 0.7-1 gcc-6-base 6.0.1-0ubuntu1 libc6 2.23-0ubuntu11.2 libgcc1 1:6.0.1-0ubuntu1 DpkgHistoryLog: Start-Date: 2021-01-04 16:20:08 Commandline: aptdaemon role='role-commit-packages' sender=':1.92' Upgrade: libproxy1v5:i386 (0.4.11-5ubuntu1.1, 0.4.11-5ubuntu1.2), libproxy1-plugin-gsettings:i386 (0.4.11-5ubuntu1.1, 0.4.11-5ubuntu1.2), python-apt-common:i386 (1.1.0~beta1ubuntu0.16.04.10, 1.1.0~beta1ubuntu0.16.04.11), libproxy-tools:i386 (0.4.11-5ubuntu1.1, 0.4.11-5ubuntu1.2), python-apt:i386 (1.1.0~beta1ubuntu0.16.04.10, 1.1.0~beta1ubuntu0.16.04.11), libproxy1-plugin-networkmanager:i386 (0.4.11-5ubuntu1.1, 0.4.11-5ubuntu1.2), python3-apt:i386 (1.1.0~beta1ubuntu0.16.04.10, 1.1.0~beta1ubuntu0.16.04.11) DuplicateSignature: package:runit:2.1.2-3ubuntu1 Setting up runit (2.1.2-3ubuntu1) ... start: Nem lehet csatlakozni az Upstarthoz: Failed to connect to socket /com/ubuntu/upstart: Kapcsolat elutasítva dpkg: error processing package runit (--configure): subprocess installed post-installation script returned error exit status 1 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationDate: Installed on 2016-11-06 (1519 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release i386 (20140417) RelatedPackageVersions: dpkg 1.18.4ubuntu1.6 apt 1.2.32ubuntu0.2 SourcePackage: runit Title: package runit 2.1.2-3ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: Upgraded to xenial on 2019-04-15 (629 days ago) ** Affects: runit (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1910115 Title: package runit 2.1.2-3ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/runit/+bug/1910115/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1877038] [NEW] Firefox seems to lack FIDO2 support with Yubikeys
Public bug reported: Ubuntu LTS versions affected. "Passwordless" authentications with Yubikeys using Firefox don't work with FIDO2. Tested both with the yubikey software packages from the bionic/universe repo and those from the vendor https://www.yubico.com/ ** Affects: evolution (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1877038 Title: Firefox seems to lack FIDO2 support with Yubikeys To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1877038/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1875338] [NEW] Attestation Certificate Authority software missing in Ubuntu LTS
Public bug reported: Suggesting a TPM2-Tools version 4.x compatible ACA server software solution similar to or like: https://github.com/nsacyber/HIRS to be included in Ubuntu LTS versions. ** Affects: ubuntu Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1875338 Title: Attestation Certificate Authority software missing in Ubuntu LTS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1875338/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1875335] [NEW] evolution public certificate lookups in ldap fail
Public bug reported: Looking up user's public certificates in AD/LDAP fail while looking up with regular ldapsearch works without any issues. ldapsearch -LLL -b DC=company,DC=com -H ldap://ADDC.company.com -Q -N '(cn=username)' userCertificate -z 10 -o ldif-wrap=no dn: CN=username,OU=CA,OU=User,OU=OU1,OU=ID,OU=OU2,DC=company,DC=com userCertificate:: MII...truncated Evolution can't look up these certificates and evolution's address book processes hang even crash evolution. The same configuration work both with ldapsearch and in thunderbird, but thunderbird is not an alternative in this case. ** Affects: evolution (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1875335 Title: evolution public certificate lookups in ldap fail To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1875335/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] Re: Cannot read /sys/devices/platform/hp-wmi/tablet
$ cat /etc/apt/sources.list.d/vicamo*.list deb http://ppa.launchpad.net/vicamo/ppa-1860940/ubuntu eoan main # deb-src http://ppa.launchpad.net/vicamo/ppa-1860940/ubuntu eoan main $ apt policy linux-image-unsigned-5.3.0-29-generic linux-image-unsigned-5.3.0-29-generic: Installed: (none) Candidate: 5.3.0-29.31+lp1860940 Version table: 5.3.0-29.31+lp1860940 500 500 http://ppa.launchpad.net/vicamo/ppa-1860940/ubuntu eoan/main amd64 Packages $ uname -a Linux two 5.3.0-28-generic #30~18.04.1-Ubuntu SMP Fri Jan 17 06:14:09 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux $ sudo apt upgrade [sudo] password for muranyia: Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] Re: Cannot read /sys/devices/platform/hp-wmi/tablet
I think I have added the PPA as you told me but the upgrade is not pulled. ** Attachment added: "Screenshot from Software & Updates settings" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+attachment/5325411/+files/Screenshot%20from%202020-02-04%2022-22-53.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] Re: Cannot read /sys/devices/platform/hp-wmi/tablet
The PPA is added and its series is bionic. I have 5.3.0-26-generic installed, the PPA offers 4.15.0-76.86+lp1860940 for bionic and 5.3.0-29.31+lp1860940 for eoan, what am I missing? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] Re: Cannot read /sys/devices/platform/hp-wmi/tablet
Thanks for the rapid fix. Can't test the PPA as I'm on 5.3.0-26-generic in Bionic for which it has no upgrade candidate. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323176/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323181/+files/PulseList.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323179/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323184/+files/WifiSyslog.txt ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323174/+files/Lspci.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323171/+files/CRDA.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323180/+files/ProcModules.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] Re: Cannot read /sys/devices/platform/hp-wmi/tablet
apport information ** Tags added: apport-collected bionic ** Description changed: # cat /sys/devices/platform/hp-wmi/tablet cat: /sys/devices/platform/hp-wmi/tablet: Invalid argument Ubuntu 18.04.3 LTS This is on a Hewlett-Packard x360 310 G2 convertible laptop. + --- + ProblemType: Bug + ApportVersion: 2.20.9-0ubuntu7.9 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: muranyia 1507 F pulseaudio + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 18.04 + InstallationDate: Installed on 2020-01-19 (7 days ago) + InstallationMedia: Ubuntu 18.04.3 LTS "Bionic Beaver" - Release amd64 (20190805) + MachineType: Hewlett-Packard HP x360 310 G2 PC + Package: linux (not installed) + ProcFB: 0 i915drmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-26-generic root=UUID=b548b7bb-ecdb-473a-aa36-112da338bff6 ro quiet splash vt.handoff=1 + ProcVersionSignature: Ubuntu 5.3.0-26.28~18.04.1-generic 5.3.13 + RelatedPackageVersions: + linux-restricted-modules-5.3.0-26-generic N/A + linux-backports-modules-5.3.0-26-generic N/A + linux-firmware1.173.14 + Tags: bionic + Uname: Linux 5.3.0-26-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo + _MarkForUpload: True + dmi.bios.date: 11/12/2019 + dmi.bios.vendor: Insyde + dmi.bios.version: F.65 + dmi.board.asset.tag: Type2 - Board Asset Tag + dmi.board.name: 8074 + dmi.board.vendor: Hewlett-Packard + dmi.board.version: 66.40 + dmi.chassis.asset.tag: Chassis Asset Tag + dmi.chassis.type: 31 + dmi.chassis.vendor: Hewlett-Packard + dmi.chassis.version: Chassis Version + dmi.modalias: dmi:bvnInsyde:bvrF.65:bd11/12/2019:svnHewlett-Packard:pnHPx360310G2PC:pvrType1ProductConfigId:rvnHewlett-Packard:rn8074:rvr66.40:cvnHewlett-Packard:ct31:cvrChassisVersion: + dmi.product.family: 103C_5336AN G=N L=SMB B=HP S=310 + dmi.product.name: HP x360 310 G2 PC + dmi.product.sku: M9T30ES#ABH + dmi.product.version: Type1ProductConfigId + dmi.sys.vendor: Hewlett-Packard ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323170/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323182/+files/RfKill.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323183/+files/UdevDb.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323177/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323175/+files/Lsusb.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323173/+files/IwConfig.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323172/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1860940/+attachment/5323178/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860940] [NEW] Cannot read /sys/devices/platform/hp-wmi/tablet
Public bug reported: # cat /sys/devices/platform/hp-wmi/tablet cat: /sys/devices/platform/hp-wmi/tablet: Invalid argument Ubuntu 18.04.3 LTS This is on a Hewlett-Packard x360 310 G2 convertible laptop. ** Affects: linux (Ubuntu) Importance: Undecided Status: Incomplete ** Package changed: onboard (Ubuntu) => linux (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860940 Title: Cannot read /sys/devices/platform/hp-wmi/tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860940/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1755987] Re: onboard onscreen keyboard lacks arrow keys, pg up/down delete etc
>From https://askubuntu.com/questions/1153506/how-do-i-enable-all-keys- on-the-touchscreen-keyboard : The GNOME On Screen Keyboard (OSK) is designed to generate keyboards from the Unicode Common Locale Data Repository data. The Unicode CLDR was never intended to limit the keys available, but that seems to be the path the GNOME developers are following. If a key isn't in the CLDR, there is no way to type it. So, that means, no Esc, no F1, no Control, etc. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1755987 Title: onboard onscreen keyboard lacks arrow keys, pg up/down delete etc To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/onboard/+bug/1755987/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1718927] Re: No HDMI sound after suspend/resume
Update: The HDMI audio device is missing even after screen off (screensaver). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1718927 Title: No HDMI sound after suspend/resume To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1718927/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1718927] Re: No HDMI sound after suspend/resume
For me, after suspend/resume the HDMI audio device is missing from Sound Settings and pavucontrol. 'pacmd list-cards' still shows the device. None of the workarounds work here. This on Ubuntu 18.04.2 LTS 18.04 kernel 5.2.0-rc6-19.06.26.amdgpu.ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1718927 Title: No HDMI sound after suspend/resume To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1718927/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 905147] Re: QPrinterDialog ignores default settings from CUPS
I still experience this bug in qt 5.13 :( -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/905147 Title: QPrinterDialog ignores default settings from CUPS To manage notifications about this bug go to: https://bugs.launchpad.net/qt/+bug/905147/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1836418] [NEW] No HDMI audio device after resume, but pacmd list-cards sees it
Public bug reported: After suspend/resume, the HDMI audio device is missing from Sound Settings and pavucontrol. 'pacmd list-cards' still shows the device. This on Ubuntu 18.04.2 LTS 18.04 kernel 5.2.0-rc6-19.06.26.amdgpu.ubuntu ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Attachment added: "Output of pacmd list-cards" https://bugs.launchpad.net/bugs/1836418/+attachment/5276828/+files/list-card.txt ** Summary changed: - No HDMI audio device after resume, but pacmd list-card sees it + No HDMI audio device after resume, but pacmd list-cards sees it ** Description changed: After suspend/resume, the HDMI audio device is missing from Sound Settings and pavucontrol. - 'pacmd list-card' still shows the device. - + 'pacmd list-cards' still shows the device. This on Ubuntu 18.04.2 LTS 18.04 kernel 5.2.0-rc6-19.06.26.amdgpu.ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1836418 Title: No HDMI audio device after resume, but pacmd list-cards sees it To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1836418/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1780534] Re: Default usr.lib.ipsec.stroke profile causes segfault for 'ipsec status'
It definitely fixed the issue for Bionic; I couldn't test Cosmic but I doubt if the outcome would be different since the bug was an obvious configuration setting. Please alert me if you insist doing a full check for Cosmic too. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1780534 Title: Default usr.lib.ipsec.stroke profile causes segfault for 'ipsec status' To manage notifications about this bug go to: https://bugs.launchpad.net/apparmor/+bug/1780534/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1780534] Re: Default usr.lib.ipsec.stroke profile causes segfault for 'ipsec status'
Not yet but I'm working in a development project that will hopefully use containers for VPN in production. However I already have a workaround (cloud-init downloading the fixed config file) so the bug is not a blocker. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1780534 Title: Default usr.lib.ipsec.stroke profile causes segfault for 'ipsec status' To manage notifications about this bug go to: https://bugs.launchpad.net/apparmor/+bug/1780534/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1803807] Re: Lock screen doesn't hide the screen contents
Update: when I tried locking the screen while mirroring my laptop and external monitor, it failed (needed to be locked twice, dock disappeared, etc.). When extending the displays, locking works correctly. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1803807 Title: Lock screen doesn't hide the screen contents To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1803807/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1803807] Re: Lock screen doesn't hide the screen contents
Sorry, I don't appear to have that folder. This is my ~/.local/share/gnome-shell/ [2018-11-19 9:13:32] ➜ gnome-shell ls -laR .: total 12 drwx-- 2 andras andras 4096 Nov 19 09:11 . drwx-- 22 andras andras 4096 Nov 19 09:07 .. -rw-rw-r-- 1 andras andras 3848 Nov 19 09:11 application_state -rw-rw-r-- 1 andras andras0 Nov 15 22:31 gnome-overrides-migrated I've been playing around trying to break things again, and it seems as though the issue was having Extensions enabled (which I believe is the default Ubuntu behavior). Since disabling them, locking and unlocking works as it should (locking once immediately locks the screen, dock is not visible on the lock screen, and dock is still present after logging back in following the locking action). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1803807 Title: Lock screen doesn't hide the screen contents To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1803807/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1803807] Re: Lock screen doesn't hide the screen contents
I just tested something, and it turns out that the issue was I had the Extensions turned on (even though each extension itself was off, as in the picture). Once I toggled that off, the issue resolved itself and now locking appears to work perfectly. Not sure why having extensions on would cause this behavior, though. ** Attachment added: "Screenshot from 2018-11-19 00-09-47.png" https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1803807/+attachment/5214087/+files/Screenshot%20from%202018-11-19%2000-09-47.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1803807 Title: Lock screen doesn't hide the screen contents To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1803807/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1803807] Re: Lock screen doesn't hide the screen contents
Ok, thanks. I created an issue and its ID is 794. https://gitlab.gnome.org/GNOME/gnome-shell/issues/794 Let me know if there's anything else I could provide to help. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1803807 Title: Lock screen doesn't hide the screen contents To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1803807/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1803807] Re: Lock screen doesn't work in 18.10
This is after locking the screen once. I opened the top right menu after locking the screen, and then opened the keyboard menu to the left of it. Both stay up, and can no longer be interacted with. The blurriness on the menus is not just because of the picture, that's what it looks like. ** Attachment added: "Locked.JPG" https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1803807/+attachment/5214061/+files/Locked.JPG -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1803807 Title: Lock screen doesn't work in 18.10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1803807/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1803807] Re: Lock screen doesn't work in 18.10
Thanks for your response. Sorry for not seeing the existing bug reports. When I lock once, the ui freezes completely and is still visible. However, on the top bar (sorry, not sure what the specific terms are), the "Activities" button, any open application indicators (the things with the icons and the application name in the top bar), and the date/time disappear, but the keyboard language indicator and other indicators on the top right remain visible. It is still possible to click on the keyboard indicator or top right menu to bring them up, but at that point they can no longer be interacted with. The top right menu does show a pause button instead of the settings/lock/power button. Pressing lock a second time locks the screen as normal. This morning, I tried locking the screen by pressing the button itself instead of using the keyboard shortcut, and that worked the first time, but displayed the behavior described above the second time. I only have gnome-tweaks installed that I know of (for disabling mouse acceleration). In the extensions tab, both items (kstatusnotifieritem and ubuntu dock) were disabled. Please let me know if I can provide any more information to help resolve this, or if this was unclear. I would attach pictures, but PrtSc doesn't do anything after pressing lock the first time. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1803807 Title: Lock screen doesn't work in 18.10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1803807/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1803807] [NEW] Lock screen doesn't work in 18.10
Public bug reported: Super+l needs to be pressed twice to lock the screen. Pressing the shortcut only once results in strange behavior. Locking the screen in general is buggy (e.g. dock is visible when screen is locked, once screen is unlocked the dock disappears even after pressing activities). These issues were not present in 18.04. I am on a fresh install of 18.10 with gnome. See also: https://askubuntu.com/questions/1082761/automatic-locking-screen-doesnt-work-in-ubuntu-18-10 https://askubuntu.com/questions/1085471/unable-to-login-again-after-screen-lock-also-gnome-hangs-if-able-to-login https://askubuntu.com/questions/1090091/ubuntu-18-10-screen-lock-options-grayed-out 1) Description:Ubuntu 18.10 Release:18.10 2) gdm3: Installed: 3.30.1-1ubuntu5 Candidate: 3.30.1-1ubuntu5 Version table: *** 3.30.1-1ubuntu5 500 500 http://us.archive.ubuntu.com/ubuntu cosmic/main amd64 Packages 100 /var/lib/dpkg/status gnome-shell: Installed: 3.30.1-2ubuntu1 Candidate: 3.30.1-2ubuntu1 Version table: *** 3.30.1-2ubuntu1 500 500 http://us.archive.ubuntu.com/ubuntu cosmic/main amd64 Packages 100 /var/lib/dpkg/status 3) The lock screen should maintain the functionality present in 18.04. Pressing the shortcut once should lock the screen, no ui elements should remain on the locked screen, locking and unlocking the screen should not result in the dock disappearing. 4) The lock screen no longer works. It is possible to view and interact with ui elements after pressing the lock shortcut. It is possible to view the dock when the screen is locked. ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: gdm3 3.30.1-1ubuntu5 ProcVersionSignature: Ubuntu 4.18.0-11.12-generic 4.18.12 Uname: Linux 4.18.0-11-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sat Nov 17 00:41:33 2018 ExecutablePath: /usr/lib/gdm3/gdm-x-session InstallationDate: Installed on 2018-11-16 (1 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) ProcEnviron: SHELL=/usr/bin/zsh PATH=(custom, no user) LANG=en_US.UTF-8 XDG_RUNTIME_DIR= SourcePackage: gdm3 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gdm3 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug cosmic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1803807 Title: Lock screen doesn't work in 18.10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1803807/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1780196] Re: Timed out Availability of block devices service
** Also affects: mdadm (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1780196 Title: Timed out Availability of block devices service To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/1780196/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1780196] Re: Timed out Availability of block devices service
I think it can be fixed in 2 ways: * blkdeactivate handles properly the syncing software-raid arrays * re-order this service, to be after the "standard" software-raid deinit -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1780196 Title: Timed out Availability of block devices service To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/1780196/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1780196] Re: Timed out Availability of block devices service
FYI: This problem can happen when the md0 device still synchronizing. Now, when the md0 is in sync, the service stopped as well: # journalctl -b -1 -u blk-availability.service systemd[1]: Starting Availability of block devices... systemd[1]: Started Availability of block devices. systemd[1]: Stopping Availability of block devices... blkdeactivate[1440]: Deactivating block devices: blkdeactivate[1440]: [UMOUNT]: unmounting paint_server_ssd-system (dm-2) mounted on /var/datastore/system... done blkdeactivate[1440]: [SKIP]: unmount of paint_server_ssd-swap (dm-1) mounted on [SWAP] blkdeactivate[1440]: [SKIP]: unmount of paint_server_ssd-root (dm-0) mounted on / blkdeactivate[1440]: [MD]: deactivating raid1 device md0... done systemd[1]: Stopped Availability of block devices. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1780196 Title: Timed out Availability of block devices service To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/1780196/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1780196] Re: Timed out Availability of block devices service
I found the commit where introduced this blkdeactivate: https://sourceware.org/git/?p=lvm2.git;a=commit;h=c698ee14bbb1310cf2383c8977d14a8e29139f8c > Traverses the tree of block devices and tries to deactivate them. > Currently, it supports device-mapper-based devices together with LVM. > See man/blkdeactivate.8 for more info. > > It is targeted for use during shutdown to properly deactivate the > whole block device stack - systemd and init scripts are provided as > well. However, it might be used directly on command line too. In this case, this stuff runs too early, as I think. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1780196 Title: Timed out Availability of block devices service To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/1780196/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1780196] [NEW] Timed out Availability of block devices service
Public bug reported: On a fresh Ubuntu 18.04 (64 bit) Server install, the blk- availability.service always killed by timeout at shutdown. I think the dependency of this service is bad, but I don't know what would be the good shutdown order for this. An almost same config has been worked on Xenial... The disk sub-system is * NVMe SSD * EFI partition * boot partition * LVM phisical volume * root logical volume * swap logical volume * data logical volume * 2 pcs. HDDs in RAID1 (but the md0 is not used yet) ## # Versions # # Ubuntu Description:Ubuntu 18.04 LTS Release:18.04 # Kernel Linux server 4.15.0-24-generic #26-Ubuntu SMP Wed Jun 13 08:44:47 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux # LVM lvm2 2.02.176-4.1ubuntu3 ## # Journal # systemd[1]: Stopped Load/Save Random Seed. systemd[1]: Stopped Update UTMP about System Boot/Shutdown. systemd[1]: Stopped Network Time Synchronization. kernel: usb 1-13: USB disconnect, device number 2 systemd[1]: blk-availability.service: Stopping timed out. Terminating. systemd[1]: blk-availability.service: Control process exited, code=killed status=15 blkdeactivate[2447]: [MD]: deactivating raid1 device md0... resync action in progress... systemd[1]: blk-availability.service: Failed with result 'timeout'. systemd[1]: Stopped Availability of block devices. systemd[1]: Stopping iSCSI initiator daemon (iscsid)... iscsid[951]: iscsid shutting down. systemd[1]: Stopped iSCSI initiator daemon (iscsid). systemd[1]: Stopped target Network is Online. systemd[1]: Stopped Wait for Network to be Configured. systemd[1]: Stopped target Network. systemd[1]: Stopping Network Name Resolution... systemd[1]: Stopped Network Name Resolution. systemd[1]: Stopping Network Service... systemd[1]: Stopped Create Volatile Files and Directories. systemd[1]: Stopped target Local File Systems. systemd[1]: Unmounting /boot/efi... systemd[1]: Unmounting /run/user/1000... systemd[1]: Unmounted /run/user/1000. systemd[1]: Stopped target Swap. systemd[1]: Deactivating swap /dev/disk/by-uuid/8a3d99d0-683e---9765162cc070... systemd[1]: Unmounted /boot/efi. systemd[1]: Unmounting /boot... systemd[1]: Stopped File System Check on /dev/disk/by-uuid/AB9E-5A2C. systemd[1]: Deactivated swap /dev/xxx_server_ssd/swap. systemd[1]: Deactivated swap /dev/disk/by-uuid/8a3d99d0-683e---9765162cc070. systemd[1]: Deactivated swap /dev/disk/by-id/dm-uuid-LVM-eatHKVdbDuw5L5RXXX2yJn7QosUWvV2IIApCOG73Bc2CbrUabBC6L3dh0N2D. systemd[1]: Deactivated swap /dev/disk/by-id/dm-name-xxx_server_ssd-swap. systemd[1]: Deactivated swap /dev/dm-1. systemd[1]: Stopped Network Service. systemd[1]: Deactivated swap /dev/mapper/xxx_server_ssd-swap. systemd[1]: Unmounted /boot. systemd[1]: Stopped File System Check on /dev/disk/by-uuid/d7cc70cc-0f33---cc21d3ed1232. systemd[1]: Removed slice system-systemd\x2dfsck.slice. systemd[1]: Stopped target Local File Systems (Pre). systemd[1]: Stopped Remount Root and Kernel File Systems. systemd[1]: Stopped Create Static Device Nodes in /dev. systemd[1]: Stopping Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... systemd[1]: Stopped target Network (Pre). systemd[1]: Stopped Apply Kernel Variables. systemd[1]: Stopped Load Kernel Modules. systemd[1]: Reached target Shutdown. systemd[1]: Reached target Unmount All Filesystems. systemd[1]: Reached target Final Step. systemd[1]: Starting Power-Off... ## # systemctl cat blk-availability.service # # /lib/systemd/system/blk-availability.service [Unit] Description=Availability of block devices After=lvm2-activation.service lvm2-lvmetad.service iscsi-shutdown.service iscsi.service iscsid.service fcoe.service DefaultDependencies=no Conflicts=shutdown.target [Service] Type=oneshot ExecStart=/bin/true ExecStop=/sbin/blkdeactivate -u -l wholevg -m disablequeueing -r wait RemainAfterExit=yes [Install] WantedBy=sysinit.target ## # Other # I tried to ask help on https://askubuntu.com/questions/1051856/timed-out-availability-of-block-devices, but I haven't got any response. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: lvm2 2.02.176-4.1ubuntu3 ProcVersionSignature: Ubuntu 4.15.0-24.26-generic 4.15.18 Uname: Linux 4.15.0-24-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 Date: Thu Jul 5 09:24:01 2018 InstallationDate: Installed on 2018-07-03 (1 days ago) InstallationMedia: Ubuntu-Server 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) SourcePackage: lvm2 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: lvm2 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1780196 Title: Timed out Availability of block devices service To manage notifications about this bug go to:
Re: [Bug 1724899] Re: releases.ubuntu.com should be available over https
I missed that. Thank you for the correction. On Thu, Oct 19, 2017 at 10:08 PM, Seth Arnold <1724...@bugs.launchpad.net> wrote: > Hello Andras, the gpg keys > > "8439 38DF 228D 22F7 B374 2BC0 D94A A3F0 EFE2 1092" > "C598 6B4F 1257 FFA8 6632 CBA7 4618 1433 FBB7 5451" > > are given on both > https://tutorials.ubuntu.com/tutorial/tutorial-how-to-verify-ubuntu#2 > and > https://wiki.ubuntu.com/SecurityTeam/FAQ#GPG_Keys_used_by_Ubuntu > > Thanks > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1724899 > > Title: > releases.ubuntu.com should be available over https > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+bug/1724899/+subscriptions > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1724899 Title: releases.ubuntu.com should be available over https To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1724899/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1458947] Re: QinHeng Electronics CH345 MIDI adapter triggers error
In Xenial, the error message is still there, however the behavior has improved and only 1 MIDI out and 1 MIDI in ports are registered. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1458947 Title: QinHeng Electronics CH345 MIDI adapter triggers error To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1458947/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1671464] Re: package desktop-file-utils 0.22-1ubuntu5.1 failed to install/upgrade: end of file on stdin at conffile prompt
Same bug in 16.04.2 as well. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1671464 Title: package desktop-file-utils 0.22-1ubuntu5.1 failed to install/upgrade: end of file on stdin at conffile prompt To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/desktop-file-utils/+bug/1671464/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1647173] [NEW] ubiquity 2.21.63.2 crashes during installation
Public bug reported: ubiquity crashed instead for finishing the installation. it already was inte main installation and I'd expect only to ask to removing the livecd image but it crashed instead. After the crash one can repeat the installtion but it crashes again. br, /istvan ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubiquity 2.21.63.2 ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 Uname: Linux 4.4.0-31-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CasperVersion: 1.376.2 Date: Sun Dec 4 16:22:57 2016 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --- LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug ubiquity-2.21.63.2 ubuntu xenial ** Attachment added: "debug" https://bugs.launchpad.net/bugs/1647173/+attachment/4787334/+files/debug -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1647173 Title: ubiquity 2.21.63.2 crashes during installation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1647173/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1574125] Re: [Lenovo G50-70] suspend not working after upgrade
A kernel upgrade was fixed my problem. I updated my Xenial kernel (4.4.0-34.53) to the latest Yakkety kernel (4.6.3-040603.201606241434) Installed .debs, what solves my problem: * http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.6.3-yakkety/linux-headers-4.6.3-040603_4.6.3-040603.201606241434_all.deb * http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.6.3-yakkety/linux-headers-4.6.3-040603-generic_4.6.3-040603.201606241434_amd64.deb * http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.6.3-yakkety/linux-image-4.6.3-040603-generic_4.6.3-040603.201606241434_amd64.deb * http://archive.ubuntu.com/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.160_all.deb -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1574125 Title: [Lenovo G50-70] suspend not working after upgrade To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1574125/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1574125] Re: [Lenovo G50-70] suspend not working after upgrade
I have this problem on my Dell Latitude E5440 :/ -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1574125 Title: [Lenovo G50-70] suspend not working after upgrade To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1574125/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1504975] Re: broadcom-sta-dkms 6.30.223.248-3.3: broadcom-sta kernel module failed to build [error: too few arguments to function ‘cfg80211_disconnected’]
I can confirm the bug & the workaround as well. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1504975 Title: broadcom-sta-dkms 6.30.223.248-3.3: broadcom-sta kernel module failed to build [error: too few arguments to function ‘cfg80211_disconnected’] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/broadcom-sta/+bug/1504975/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1501789] Re: Mounting encrypted home and video driver fail at kernel update
I was about to try the mainline kernel but meanwhile an update for 3.13.0-65 (3.13.0-65.106) came down the tube and the problems went away. Please close this bug with the appropriate status. Thanks for all the help! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1501789 Title: Mounting encrypted home and video driver fail at kernel update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1501789/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1501789] Re: Mounting encrypted home and video driver fail at kernel update
Yeah, my BIOS update policy is "don't update until you're experiencing a problem with it". Now I have updated from version 0503 to 1605 (and curiously, I had to reinstall grub2), but unfortunately I'm having the same problems. # dmidecode -s bios-version && sudo dmidecode -s bios-release-date 1605 10/25/2012 ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed ** Tags removed: bios-outdated-1605 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1501789 Title: Mounting encrypted home and video driver fail at kernel update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1501789/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1501789] [NEW] Mounting encrypted home and video driver fail at kernel update
Public bug reported: Updated from linux-image-3.13.0-63-lowlatency to linux-image-3.13.0-65-lowlatency and at the following boot login failed and row-res mode appeared. I tried `update-initramfs -k -u` in recovery mode but it didn't help. It seems that the graphical login fails because of a failure to mount the encrypted home. On all the previous kernel updates, no such problem occurred. Booting into the older kernel works fine. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-63-lowlatency 3.13.0-63.103 ProcVersionSignature: Ubuntu 3.13.0-63.103-lowlatency 3.13.11-ckt25 Uname: Linux 3.13.0-63-lowlatency x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.15 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: muranyia 3049 F pulseaudio /dev/snd/controlC0: muranyia 3049 F pulseaudio CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: Unity Date: Thu Oct 1 16:30:02 2015 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=66f8ebeb-7c0a-4732-872c-94560438765b InstallationDate: Installed on 2013-06-10 (842 days ago) InstallationMedia: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20130214) IwConfig: eth1 no wireless extensions. lono wireless extensions. MachineType: To be filled by O.E.M. To be filled by O.E.M. ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-63-lowlatency root=UUID=991e27c8-91ce-4695-b75f-f1647644d93c ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-63-lowlatency N/A linux-backports-modules-3.13.0-63-lowlatency N/A linux-firmware1.127.15 RfKill: 0: hci0: Bluetooth Soft blocked: yes Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-08-29 (397 days ago) dmi.bios.date: 05/30/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0503 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: M5A97 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0503:bd05/30/2011:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnASUSTeKComputerINC.:rnM5A97:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: To be filled by O.E.M. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug third-party-packages trusty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1501789 Title: Mounting encrypted home and video driver fail at kernel update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1501789/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1294056] Re: Qjackctl systray icon shows no menu
https://sourceforge.net/p/qjackctl/tickets/22/ Launchpad doesn't let me add this as upstream bug tracker... -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1294056 Title: Qjackctl systray icon shows no menu To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qjackctl/+bug/1294056/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1093171] Re: /etc/default/grub references vbeinfo
BTW, vbeinfo is not available in grub-efi -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1093171 Title: /etc/default/grub references vbeinfo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1093171/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1414035] Re: Calibration way off with eGalax INC. USB TouchController
Seems that it was a more complex problem ** Changed in: xinput-calibrator (Ubuntu) Status: New = Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1414035 Title: Calibration way off with eGalax INC. USB TouchController To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xinput-calibrator/+bug/1414035/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1454240] Re: touchscreen refuses calibration by xinput set-prop
** Package changed: xserver-xorg-input-evdev (Ubuntu) = xinput (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1454240 Title: touchscreen refuses calibration by xinput set-prop To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xinput/+bug/1454240/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1454240] Re: touchscreen refuses calibration by xinput set-prop
--format=32 works as expected ** Changed in: xinput (Ubuntu) Status: New = Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1454240 Title: touchscreen refuses calibration by xinput set-prop To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xinput/+bug/1454240/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1458947] Re: QinHeng Electronics CH345 MIDI adapter triggers error
** Attachment added: Output of alsa-info.sh https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1458947/+attachment/4405365/+files/alsa-info.sh.log -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1458947 Title: QinHeng Electronics CH345 MIDI adapter triggers error To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1458947/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1458947] Re: QinHeng Electronics CH345 MIDI adapter triggers error
** Bug watch added: freedesktop.org Bugzilla #90678 https://bugs.freedesktop.org/show_bug.cgi?id=90678 ** Also affects: pulseaudio via https://bugs.freedesktop.org/show_bug.cgi?id=90678 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1458947 Title: QinHeng Electronics CH345 MIDI adapter triggers error To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1458947/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1458947] [NEW] QinHeng Electronics CH345 MIDI adapter triggers error
Public bug reported: Cheap oriental MIDI adapter starts up with the following error, but works as expected.* E: [pulseaudio] module.c: Failed to load module module-alsa-card (argument: device_id=1 name=usb-1a86_USB2.0-MIDI-00-USB20MIDI card_name=alsa_card.usb-1a86_USB2.0-MIDI-00-USB20MIDI namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties=module-udev- detect.discovered=1): initialization failed. The device: 1a86:752d QinHeng Electronics CH345 MIDI adapter Of course i'm not sure whether this is a PA problem or an ALSA or UDEV bug. Ubuntu 14.04.2 LTS Pulseaudio 1:4.0-0ubuntu11.1 * works almost as expected: there is one physical input and one output, but in ALSA one input and two outputs appear. ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1458947 Title: QinHeng Electronics CH345 MIDI adapter triggers error To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1458947/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1454240] Re: touchscreen refuses calibration
** Description changed: I had managed to calibrate my eGalax touchscreen (Hewlett-Packard Pavilion TX 1000 tablet pc) a while ago, then upgraded video drivers. Ran into a problem with the video drivers, and by the time I've ironed it out, the touchscreen started to refuse calibration. I have purged all extra PPAs but still no success. ` $ xinput set-prop --type=int --format=8 12 Evdev Axis Calibration 41 3961 100 3949 X Error of failed request: BadMatch (invalid parameter attributes) - Major opcode of failed request: 131 (XInputExtension) - Minor opcode of failed request: 57 () - Serial number of failed request: 19 - Current serial number in output stream: 20 + Major opcode of failed request: 131 (XInputExtension) + Minor opcode of failed request: 57 () + Serial number of failed request: 19 + Current serial number in output stream: 20 ` - Also, calibration values set in - /usr/share/X11/xorg.conf.d/99-calibration.conf don't work any more. + Calibration values set in /usr/share/X11/xorg.conf.d/99-calibration.conf + do work. Ubuntu 14.04.2 LTS xserver-xorg-input-evdev: - Installed: 1:2.8.2-1ubuntu2 - Candidate: 1:2.8.2-1ubuntu2 - Version table: - *** 1:2.8.2-1ubuntu2 0 - 500 http://hu.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages - 100 /var/lib/dpkg/status + Installed: 1:2.8.2-1ubuntu2 + Candidate: 1:2.8.2-1ubuntu2 + Version table: + *** 1:2.8.2-1ubuntu2 0 + 500 http://hu.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages + 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-52.86-generic 3.13.11-ckt18 Uname: Linux 3.13.0-52-generic x86_64 NonfreeKernelModules: wl nvidia ApportVersion: 2.14.1-0ubuntu3.10 Architecture: amd64 CurrentDesktop: Unity Date: Tue May 12 14:39:37 2015 DistUpgraded: 2014-08-20 00:50:55,180 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu EcryptfsInUse: Yes InstallationDate: Installed on 2014-01-09 (487 days ago) InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release amd64 (20130820.1) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-52-generic root=UUID=c286a7df-7364-4dcd-83ab-7cd2b4f2b792 ro quiet splash vt.handoff=7 SourcePackage: xserver-xorg-input-evdev UpgradeStatus: Upgraded to trusty on 2014-08-19 (265 days ago) dmi.bios.date: 04/18/2008 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.20 dmi.board.name: 30BF dmi.board.vendor: Quanta dmi.board.version: 69.2E dmi.chassis.type: 10 dmi.chassis.vendor: Quanta dmi.chassis.version: N/A dmi.modalias: dmi:bvnHewlett-Packard:bvrF.20:bd04/18/2008:svnHewlett-Packard:pn:pvrRev1:rvnQuanta:rn30BF:rvr69.2E:cvnQuanta:ct10:cvrN/A: dmi.product.version: Rev 1 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.6 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Tue May 12 14:01:51 2015 xserver.configfile: /etc/X11/xorg.conf xserver.errors: open /dev/dri/card0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: Output DFP-0 xserver.version: 2:1.15.1-0ubuntu2.7 xserver.video_driver: nvidia ** Summary changed: - touchscreen refuses calibration + touchscreen refuses calibration by xinput set-prop -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1454240 Title: touchscreen refuses calibration by xinput set-prop To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-evdev/+bug/1454240/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1215905] Re: qttools5-dev-tools missing '/usr/lib/x86_64-linux-gnu/qt5/bin/qdbus'?
Interestingly the qdbus command is still available (but not working), type 'qd' in the terminal and press TAB and it will be one of the suggestions. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1215905 Title: qttools5-dev-tools missing '/usr/lib/x86_64-linux-gnu/qt5/bin/qdbus'? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qttools-opensource-src/+bug/1215905/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1454240] [NEW] touchscreen refuses calibration
Public bug reported: I had managed to calibrate my eGalax touchscreen (Hewlett-Packard Pavilion TX 1000 tablet pc) a while ago, then upgraded video drivers. Ran into a problem with the video drivers, and by the time I've ironed it out, the touchscreen started to refuse calibration. I have purged all extra PPAs but still no success. ` $ xinput set-prop --type=int --format=8 12 Evdev Axis Calibration 41 3961 100 3949 X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 131 (XInputExtension) Minor opcode of failed request: 57 () Serial number of failed request: 19 Current serial number in output stream: 20 ` Also, calibration values set in /usr/share/X11/xorg.conf.d/99-calibration.conf don't work any more. Ubuntu 14.04.2 LTS xserver-xorg-input-evdev: Installed: 1:2.8.2-1ubuntu2 Candidate: 1:2.8.2-1ubuntu2 Version table: *** 1:2.8.2-1ubuntu2 0 500 http://hu.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-52.86-generic 3.13.11-ckt18 Uname: Linux 3.13.0-52-generic x86_64 NonfreeKernelModules: wl nvidia ApportVersion: 2.14.1-0ubuntu3.10 Architecture: amd64 CurrentDesktop: Unity Date: Tue May 12 14:39:37 2015 DistUpgraded: 2014-08-20 00:50:55,180 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu EcryptfsInUse: Yes InstallationDate: Installed on 2014-01-09 (487 days ago) InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release amd64 (20130820.1) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-52-generic root=UUID=c286a7df-7364-4dcd-83ab-7cd2b4f2b792 ro quiet splash vt.handoff=7 SourcePackage: xserver-xorg-input-evdev UpgradeStatus: Upgraded to trusty on 2014-08-19 (265 days ago) dmi.bios.date: 04/18/2008 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.20 dmi.board.name: 30BF dmi.board.vendor: Quanta dmi.board.version: 69.2E dmi.chassis.type: 10 dmi.chassis.vendor: Quanta dmi.chassis.version: N/A dmi.modalias: dmi:bvnHewlett-Packard:bvrF.20:bd04/18/2008:svnHewlett-Packard:pn:pvrRev1:rvnQuanta:rn30BF:rvr69.2E:cvnQuanta:ct10:cvrN/A: dmi.product.version: Rev 1 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.6 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Tue May 12 14:01:51 2015 xserver.configfile: /etc/X11/xorg.conf xserver.errors: open /dev/dri/card0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: Output DFP-0 xserver.version: 2:1.15.1-0ubuntu2.7 xserver.video_driver: nvidia ** Affects: xserver-xorg-input-evdev (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug possible-manual-nvidia-install trusty ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1454240 Title: touchscreen refuses calibration To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-evdev/+bug/1454240/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1390474] Re: Volume element PCM has 6 channels. That's too much! - PA doesn't support elements with more than two channels
** Bug watch added: freedesktop.org Bugzilla #84804 https://bugs.freedesktop.org/show_bug.cgi?id=84804 ** Also affects: pulseaudio via https://bugs.freedesktop.org/show_bug.cgi?id=84804 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1390474 Title: Volume element PCM has 6 channels. That's too much! - PA doesn't support elements with more than two channels To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1390474/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 776946] Re: xinput_calibrator shows incorrect path for xorg.conf.d
Apparently /usr/share/X11/xorg.conf.d/ is shown by version 0.7.5+git20140201-1 in Trusty ** Changed in: xinput-calibrator (Ubuntu) Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/776946 Title: xinput_calibrator shows incorrect path for xorg.conf.d To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xinput-calibrator/+bug/776946/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 377127] Re: gkrellm has broken shadow with compiz
The bug is not present in 14.04.1 ** Changed in: gkrellm (Ubuntu) Status: New = Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/377127 Title: gkrellm has broken shadow with compiz To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gkrellm/+bug/377127/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1390474] Re: Volume element PCM has 6 channels. That's too much! - PA doesn't support elements with more than two channels
According to comment 5 ** Changed in: pulseaudio (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1390474 Title: Volume element PCM has 6 channels. That's too much! - PA doesn't support elements with more than two channels To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1390474/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1414035] [NEW] Calibration way off with eGalax INC. USB TouchController
Public bug reported: Trying to calibrate an eGalax INC. USB TouchController on a HP Pavilion tx 100 tablet PC. Out of the box the calibration is off by a few pixels. Upon using xinput-calibrator and applying the results, the calibration goes way off. I'd be happy to supply more details if needed. Ubuntu 14.04.1 Trusty Tahr xinput-calibrator 0.7.5+git20140201-1 ** Affects: xinput-calibrator (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1414035 Title: Calibration way off with eGalax INC. USB TouchController To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xinput-calibrator/+bug/1414035/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1390474] Re: Volume element PCM has 6 channels. That's too much! - PA doesn't support elements with more than two channels
Thanks Raymond for the info. I would like to get this bug ironed out in Pulseaudio not only locally. Can we go on with triaging? Right the the bug is New. Could we eventually change to Conformed? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1390474 Title: Volume element PCM has 6 channels. That's too much! - PA doesn't support elements with more than two channels To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1390474/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1390474] Re: Volume element PCM has 6 channels. That's too much! with Terratec PHASE26
have you ask Arun how to revert his patch ? No, I am just an end user so I don't feel I shall ask someone to revert their patch. However... Arun? The patch was registered by Tanu Kaskinen and Colin Guthrie. I have forwarded this bug to them. Colin did not reply, Tanu's reply is above. https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1390474/comments/5 I would appreciate if, in case you think that is the best solution for the moment, you proposed reverting the patch to the appropriate personnel. Thanks. Anyway, shall we triage this bug, shan't we? Otherwise it will just expire. ** Summary changed: - Volume element PCM has 6 channels. That's too much! with Terratec PHASE26 + Volume element PCM has 6 channels. That's too much! - PA doesn't support elements with more than two channels -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1390474 Title: Volume element PCM has 6 channels. That's too much! - PA doesn't support elements with more than two channels To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1390474/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1390474] Re: Volume element PCM has 6 channels. That's too much! with Terratec PHASE26
Please tell me what to send in order to triage this bug, thanks -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1390474 Title: Volume element PCM has 6 channels. That's too much! with Terratec PHASE26 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1390474/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1390474] Re: Volume element PCM has 6 channels. That's too much! with Terratec PHASE26
Is any sound card with multi channel volume control supported by pulseaudio? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1390474 Title: Volume element PCM has 6 channels. That's too much! with Terratec PHASE26 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1390474/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1390474] Re: Volume element PCM has 6 channels. That's too much! with Terratec PHASE26
this mean your usb audio have a 6 channel playbacck volume control similar to https://bugs.freedesktop.org/show_bug.cgi?id=84983#c5 Does this mean that bug #936539 (Freedesktop bug 84983 on Launchpad) involves all devices with more than 2 volume channels? In that case, shall I suggest to change the description of #936539 to something more general and mark this one as a duplicate? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1390474 Title: Volume element PCM has 6 channels. That's too much! with Terratec PHASE26 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1390474/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 519452] Re: Can't start a session in low-graphics mode
Same promlem here with 14.04. ** Changed in: nvidia-graphics-drivers (Ubuntu) Status: Expired = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/519452 Title: Can't start a session in low-graphics mode To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/519452/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 883459]
Tobias Leopold, you are probably right of being a timing issue. If you can reproduce it, and could work on the code, the chances of fixing it would be high(er). As I pointed out already, I use POP3 and IMAP with local filters on two machines and didn't see this problem for a long time, so best would be to fix on a machine where it actually manifests it. It was a long time ago when I last worked on Akonadi/KMail code, but here are some hints: - add debug output (possibly with timestamps) in the filtering and the akonadi code. You might have to do that both in the akonadi server and the akonadi resources (filter agent and the base classes) - the filter agent is in kdepim/mailfilteragent, the starting point could be mailfilteragent.cpp and there the itemAdded() method. This is called when a new mail appeares in a monitored folder (ie. the inbox) - itemsReceiviedForFiltering() there is called when the filter agent retrieves the above item (so it can analyze that it needs to be filtered or not) - interesting code could be also in Akonadi::AgentBase class (kdepimlibs repository) and the changeRecorder() part, but only if you can't figure out anything useful from the above - mailfilteragent/filtermanager.cpp is the code that does the filtering. processContextItem() is the method that does the move/copy of the messages. Adding debug output here also makes sense to see when does this happen - for the server itself you can enable debugging in the akonadiconsole app, although this will give you lots of data and will make things slow, so better make sure you don't get lot of mails while debugging is enabled. But it can show all the communication between the akonadi server and the clients and all the jobs running and their order. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/883459 Title: KMail duplicates emails To manage notifications about this bug go to: https://bugs.launchpad.net/kdepim/+bug/883459/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 883459]
Unless someone changed meantime, the way it works is: - mail is delivered to Inbox - the filtering code gets a notification of new mails - it runs the filters on them and does what you have set up in the filter, like moves the mail -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/883459 Title: KMail duplicates emails To manage notifications about this bug go to: https://bugs.launchpad.net/kdepim/+bug/883459/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 883459]
If you look at the history, you see we care about it and use it. Unfortunately I have no real time for KMail these days, and for me it works. Both for POP3 and IMAP accounts, I have no mail duplication with filters, so it is really hard to do anything without spending a lot of time on it, -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/883459 Title: KMail duplicates emails To manage notifications about this bug go to: https://bugs.launchpad.net/kdepim/+bug/883459/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Fwd: [Bug 1390474] Re: Volume element PCM has 6 channels. That's too much! with Terratec PHASE26
Kindly forwarding this bug, please express your thoughts on Launchpad. -- Forwarded message -- From: Raymond 1390...@bugs.launchpad.net Date: Sat, Nov 8, 2014 at 4:06 PM Subject: [Bug 1390474] Re: Volume element PCM has 6 channels. That's too much! with Terratec PHASE26 To: muran...@gmail.com http://cgit.freedesktop.org/pulseaudio/pulseaudio/commit/src/modules/alsa /alsa-mixer.c?id=527078523815587bfd021bc1d10782403e9b3e84 send email to the author of the patch -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1390474 Title: Volume element PCM has 6 channels. That's too much! with Terratec PHASE26 Status in “pulseaudio” package in Ubuntu: New Bug description: When connecting the Terratec PHASE26 in 16/48 mode (6 channels) I get the error Volume element PCM has 6 channels. That's too much! I can't handle that! and the card fails to show up in Sound Settings. Everything is fine with 24/48 mode (2 channels). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1390474/+subscriptions -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1390474 Title: Volume element PCM has 6 channels. That's too much! with Terratec PHASE26 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1390474/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1390474] [NEW] Volume element PCM has 6 channels. That's too much! with Terratec PHASE26
Public bug reported: When connecting the Terratec PHASE26 in 16/48 mode (6 channels) I get the error Volume element PCM has 6 channels. That's too much! I can't handle that! and the card fails to show up in Sound Settings. Everything is fine with 24/48 mode (2 channels). ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Attachment added: output of pulseaudio - https://bugs.launchpad.net/bugs/1390474/+attachment/4255236/+files/phase26-pa.log -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1390474 Title: Volume element PCM has 6 channels. That's too much! with Terratec PHASE26 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1390474/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1381475] Re: Firewire sound card registered by the name of the fw controller
BTW not only Gnome Settings but also `pactl list` has the same info. The right names are there too, however. alsa.card = 0 alsa.card_name = PHASE 88 Rack FW alsa.long_card_name = TerraTec Electronic Gmb PHASE 88 Rack FW (id:3, rev:1), GUID 000aac0300592827 a alsa.driver_name = snd_bebob device.bus_path = pci-:01:09.0 sysfs.path = /devices/pci:00/:00:09.0/:01:09.0/fw2/fw2.0/sound/card0 udev.id = firewire-0x000aac0300592827 device.bus = firewire device.vendor.name = Texas Instruments device.product.name = TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] device.string = 0 device.description = TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] module-udev-detect.discovered = 1 device.icon_name = audio-card-firewire profiles: input:10-channels: 10 Channels Input (priority 10, available: unknown) output:10-channels: 10 Channels Output (priority 1000, available: unknown) output:10-channels+input:10-channels: 10 Channels Output + 10 Channels Input (priority 1010, available: unknown) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1381475 Title: Firewire sound card registered by the name of the fw controller To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1381475/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1381475] Re: Firewire sound card registered by the name of the fw controller
which name do you want when you plug and unplug the device ? Based on how other cards are named (see previous attachment Firewire sound card listed in Sound Settings) there sould be a short description of the output, followed by the short name of the card. For example: 10 Channels * PHASE 88 ** * Please note that the 10 output channels are, in this case, 8 Analog and 2 Digital (the same applies to Input channels). As far as I can see, normally the 8 Channels Analog Output and the Digital Output (S/PDIF) would be displayed as two separate options in Sound Settings - I guess this is beyond the scope of the current issue and I shall file a new bug. ** or PHASE 88 Rack FW -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1381475 Title: Firewire sound card registered by the name of the fw controller To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1381475/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1381475] [NEW] Firewire sound card registered by the name of the fw controller
Public bug reported: I am testing the new snd-firewire ALSA module which is currently getting accepted into the kernel. I have noticed that while ALSA recognizes the correct name for the card, PulseAudio displays another, wrong name, which is apparently the name of the FireWire controller through which the sound card is connected. $ aplay -l List of PLAYBACK Hardware Devices card 0: FW [PHASE 88 Rack FW], device 0: BeBoB [PHASE 88 Rack FW PCM] Subdevices: 1/1 Subdevice #0: subdevice #0 $ pacmd list-sinks Welcome to PulseAudio! Use help for usage information. 4 sink(s) available. [...] index: 2 name: alsa_output.firewire-0x000aac0300592827.10-channels driver: module-alsa-card.c flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9000 volume: 0: 100% 1: 100% 2: 100% 3: 100% 4: 100% 5: 100% 6: 100% 7: 100% 8: 100% 9: 100% 0: 0,00 dB 1: 0,00 dB 2: 0,00 dB 3: 0,00 dB 4: 0,00 dB 5: 0,00 dB 6: 0,00 dB 7: 0,00 dB 8: 0,00 dB 9: 0,00 dB balance 0,00 base volume: 100% 0,00 dB volume steps: 65537 muted: no current latency: 0,00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 5 sample spec: s16le 10ch 44100Hz channel map: front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right,aux0,aux1 used by: 0 linked by: 0 configured latency: 0,00 ms; range is 0,50 .. 185,76 ms card: 3 alsa_card.firewire-0x000aac0300592827 module: 8 properties: alsa.resolution_bits = 16 device.api = alsa device.class = sound alsa.class = generic alsa.subclass = generic-mix alsa.name = PHASE 88 Rack FW PCM alsa.id = BeBoB alsa.subdevice = 0 alsa.subdevice_name = subdevice #0 alsa.device = 0 alsa.card = 0 alsa.card_name = PHASE 88 Rack FW alsa.long_card_name = TerraTec Electronic Gmb PHASE 88 Rack FW (id:3, rev:1), GUID 000aac0300592827 a alsa.driver_name = snd_bebob device.bus_path = pci-:01:09.0 sysfs.path = /devices/pci:00/:00:09.0/:01:09.0/fw2/fw2.0/sound/card0 udev.id = firewire-0x000aac0300592827 device.bus = firewire device.vendor.name = Texas Instruments device.product.name = TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] device.string = hw:0 device.buffering.buffer_size = 163840 device.buffering.fragment_size = 81920 device.access_mode = mmap+timer device.profile.name = 10-channels device.profile.description = 10 Channels device.description = TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] 10 Channels alsa.mixer_name = PHASE 88 Rack FW module-udev-detect.discovered = 1 device.icon_name = audio-card-firewire PulseAudio 1:4.0-0ubuntu11 ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Attachment added: Firewire sound card listed in Sound Settings https://bugs.launchpad.net/bugs/1381475/+attachment/4236944/+files/73dda98c-53ad-11e4-9367-1fa6479efb60.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1381475 Title: Firewire sound card registered by the name of the fw controller To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1381475/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1381475] Re: Firewire sound card registered by the name of the fw controller
** Attachment added: output of pulseaudio - --log-time=1 https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1381475/+attachment/4237185/+files/pulseverbose.log -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1381475 Title: Firewire sound card registered by the name of the fw controller To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1381475/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1381475] Re: Firewire sound card registered by the name of the fw controller
http://www.alsa- project.org/db/?f=8b6f81d43c2c1156c94deba796317d3c274dee3e -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1381475 Title: Firewire sound card registered by the name of the fw controller To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1381475/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1381475] Re: Firewire sound card registered by the name of the fw controller
** Attachment added: output of pactl list https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1381475/+attachment/4237170/+files/pactl.list.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1381475 Title: Firewire sound card registered by the name of the fw controller To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1381475/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1308628] Re: xhci-hda does not support isochronous streaming on usb 2.0 devices
Same problem here with Intel D54250WYK NUC box + Audiolab M-DAC which uses async USB connection for 24/96 audio. It seems that the problem only occurs with Intel USB3 controllers. Unfortunately the internal USB2.0 headers in my NUC are controlled by the same USB3.0 controller, and there is no option in the BIOS to disable the XHCI (USB3) mode. I have indicated the problem towards Intel: https://communities.intel.com/message/255474#255474 Here is a discussion regarding the Linux xhci_hcd isochronous problem: http://www.spinics.net/lists/linux-usb/msg107264.html Last mail on 8 May 2014: This does seem to point to an incompatibility between the driver and the Intel xHCI hardware. Figuring out what that incompability is may not be easy, though... -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1308628 Title: xhci-hda does not support isochronous streaming on usb 2.0 devices To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntustudio/+bug/1308628/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 959616] Re: Permission denied errors when writing on any target drive
Inspired by Nick's tip I've renamed ~/.config/transmission/settings.json and ~/.config/transmission/dht.dat but kept resume and torrents folders intact. The error is gone. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/959616 Title: Permission denied errors when writing on any target drive To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/transmission/+bug/959616/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1306363] Re: Session-Saver Plugin Missing from gedit-plugins
There is a newer version of the plugin at https://github.com/sphax3d/gedit-sessionsaver It doesn't seem stabile at the time of writing (current version needs to be patched according to Issue Tracker comments). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1306363 Title: Session-Saver Plugin Missing from gedit-plugins To manage notifications about this bug go to: https://bugs.launchpad.net/gdp/+bug/1306363/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 998367] Re: fingerprint login can't access encrypted home user account
How about NOT displaying the finderprint prompt at login when the home is encrypted? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/998367 Title: fingerprint login can't access encrypted home user account To manage notifications about this bug go to: https://bugs.launchpad.net/fingerprint-gui/+bug/998367/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1185771] Re: Mark libwebkitgtk-1.0-common as Multi-Arch: foreign
Does bug this have any attention? Looks like nothing happened a long time. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1185771 Title: Mark libwebkitgtk-1.0-common as Multi-Arch: foreign To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webkit/+bug/1185771/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1185771] Re: Mark libwebkitgtk-1.0-common as Multi-Arch: foreign
The link in the Status field should at least point to information how it is fixed, where we can test the fix or something similar. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1185771 Title: Mark libwebkitgtk-1.0-common as Multi-Arch: foreign To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webkit/+bug/1185771/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1327628] [NEW] Incorrect Package Recommendation for Xen on 14.04
Public bug reported: The ganeti package (as of 2.10.5-1~trusty+1) recommends qemu-kvm, xen- linux-system-amd64 or xen-linux-system-686-pae on 14.04. Since the Xen meta-package has been renamed to xen-system-amd64 (no i386 version any more), this results in qemu-kvm being installed even on Xen-based setups. A workaround for the time being is to install with: apt-get install --no-install-recommends ganeti ** Affects: ganeti (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1327628 Title: Incorrect Package Recommendation for Xen on 14.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ganeti/+bug/1327628/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1311382] Re: Ubuntu 14.04 does not mount my Nexus 4 (Android 4.4.2)
This bug is still not fixed, I also have the same issue, running on a fresh Ubuntu install: root@ubuntu:~# uname -a Linux ubuntu 3.13.0-27-generic #50-Ubuntu SMP Thu May 15 18:06:16 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux root@ubuntu:~# dmesg | tail -n 6 [33611.544306] usb 1-1: new high-speed USB device number 5 using ehci-pci [33611.737065] usb 1-1: New USB device found, idVendor=18d1, idProduct=d002 [33611.737069] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [33611.737071] usb 1-1: Product: Nexus 4 [33611.737072] usb 1-1: Manufacturer: LGE [33611.737073] usb 1-1: SerialNumber: 04fa23e05d8fd9b1 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1311382 Title: Ubuntu 14.04 does not mount my Nexus 4 (Android 4.4.2) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1311382/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1311382] Re: Ubuntu 14.04 does not mount my Nexus 4 (Android 4.4.2)
It turns out the phone didn't have MTP enabled. To turn it on: Settings - Storage - options -USB computer connection - Media device (MTP) Now it automounts nicely. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1311382 Title: Ubuntu 14.04 does not mount my Nexus 4 (Android 4.4.2) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1311382/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1302456] Re: missing librelogo localizations
I cannot verify my solution, but from Björn's comment it seems we have start with the attached patch. I do not know how to add those files to the packaging information (by the way I did not find any localized .properties files there at all). ** Patch added: librelogo-l10n.diff https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1302456/+attachment/4090370/+files/librelogo-l10n.diff -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1302456 Title: missing librelogo localizations To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-translations/+bug/1302456/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 798086] Re: [Samsung N130] Occasional The disk drive for /dev/mapper/cryptswap1 is not ready yet or not present on system startup
** Changed in: linux (Ubuntu) Assignee: dissehans (dissehans) = (unassigned) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/798086 Title: [Samsung N130] Occasional The disk drive for /dev/mapper/cryptswap1 is not ready yet or not present on system startup To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/798086/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
