[Bug 573493] Re: No sound from headphone jack

[Andrew Henry]

4 years for an update?  Wow.  Im sorry but I don't have anything else to
offer for this bug report.  I have not used Ubuntu for the last 3 years,
so for me, it's not relevant anymore.  If no-one else expresses interest
then I suppose it can be closed.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/573493

Title:
  No sound from headphone jack

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/573493/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 630748] Re: iwlagn degrades quickly during normal wifi session

[Andrew Henry]

"Support for 4965 is still contained in the iwlagn
driver even though considered a legacy device. Intel affirms
802.11n should work. iwl3945 is no longer supported and will never
have a functional 802.11n mode."

I don't understand this comment either and agree with Alexander Hall; It
sounds like 4965 should get working 802.11n in patch.  Another point is
that 3945 does not have hardware support for 802.11n, it only supports
802.11g.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/630748

Title:
  iwlagn degrades quickly during normal wifi session

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 630748] Re: iwlagn degrades quickly during normal wifi session

[Andrew Henry]

On 20 October 2010 11:21, Christoph Buchner <630...@bugs.launchpad.net> wrote:

> because intel are apparently at working fixing the problem in the
> wireless chip's firmware. until they release their bugfix, wireless n
> will remain disabled.

What do you mean firmware?  You mean they are fixing their driver?  If
it was a firmware issue, then it would mean that to get a fix you
would need to buy a new network card/new laptop with updated chipset
firmware to get the fix.

It's obviously not a firmware issue, as wireless N works flawlessly on
Windows with the same chipset.  But it is a bit of a bummer that we
have to put up with disabled wireless n.  In fact, by doing that, it's
making it worse for Ubuntu users, because I did at least have working
wireless N in Ubuntu 10.04, and yeah, it could degrade, but it was
intermittent and to be honest I didn't really notice that much.  Now
when I get an enforced disable from Canonical, I *do* notice that
speeds are slower cause im only running G.

Wouldn't it have been better to give us the choice, simply by doing
nothing and just publishing in the 10.10 release notes that there was
a driver issue and Intel werre working on it?  What is the argument
for actively disabling 802.11n?  I could have quite happily
re-configured my router and laptop so that I only connected to
wireless G if I was that bothered about the N degrading.

-- 
iwlagn degrades quickly during normal wifi session
https://bugs.launchpad.net/bugs/630748
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 234185] Re: Alternate CD cdrom-detect.postinst does not consider USB flash drive/key.

[Andrew Henry]

This still fails for me on 10.10 alternate amd64.  I used Ubootin to
create the USB image, Im adding cdrom-detect/try-usb=true and it doesn't
complain about not finding the cdrom, but when it starts to copy if says
there was a problem reading the cdrom and that it failed to copy a file.

-- 
Alternate CD cdrom-detect.postinst does not consider USB flash drive/key. 
https://bugs.launchpad.net/bugs/234185
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 524281] Re: Tens of wakes per second in "[kernel scheduler] Load balancing tick" on Core 2 Duo even with only 1 core enabled

[Andrew Henry]

so in all liklihood, were going to have to shut up and put up until next
ubuntu release when we get a new kernel?  or is there any chance whatsoever
that this will be backported??

On 14 May 2010 03:21, bornagainpenguin 
wrote:

> I've had some success Daniel Hollocher's linux-ck ppa:
> https://launchpad.net/~chogydan/+archive/ppa
>
> It doesn't fix everything, but the BFS making such a difference does
> make it clear this is a kernel issue and not just a few of us having
> strange hardware...
>
> --bornagainpenguin
>
> --
> Tens of wakes per second in "[kernel scheduler] Load balancing tick" on
> Core 2 Duo even with only 1 core enabled
> https://bugs.launchpad.net/bugs/524281
> You received this bug notification because you are a direct subscriber
> of the bug.
>

-- 
Tens of wakes per second in "[kernel scheduler] Load balancing tick" on Core 2 
Duo even with only 1 core enabled
https://bugs.launchpad.net/bugs/524281
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 524281] Re: Tens of wakes per second in "[kernel scheduler] Load balancing tick" on Core 2 Duo even with only 1 core enabled

[Andrew Henry]

On 08/05/10 20:42, Michael Christensen wrote:
> This is what is looks like in Powertop when scrolling a page in Firefox:
> Top causes for wakeups:
> 42,3% (115,9)   [kernel scheduler] Load balancing tick
> 
> This is what it looks like when idle:
> 8,2% (7,0)   [kernel scheduler] Load balancing tick
> 

Im getting min 25% on Load balancing tick even when idle.  In fact, it
decreases when im actively using the CPU!

-- 
Tens of wakes per second in "[kernel scheduler] Load balancing tick" on Core 2 
Duo even with only 1 core enabled
https://bugs.launchpad.net/bugs/524281
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 524281] Re: Tens of wakes per second in "[kernel scheduler] Load balancing tick" on Core 2 Duo even with only 1 core enabled

[Andrew Henry]

On 08/05/10 11:16, Pawel wrote:
> It seems the Phoronix does confirm this issue:
> 
> http://www.phoronix.com/scan.php?page=article&item=linux_windows_part2&num=1
> 

Thats general power consumption isn't it?  They compare graphics card
drivers and power consumption...I do not see any mention of this
particular issue with kernel tick wakeups?

--Andrew

-- 
Tens of wakes per second in "[kernel scheduler] Load balancing tick" on Core 2 
Duo even with only 1 core enabled
https://bugs.launchpad.net/bugs/524281
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 524281] Re: Tens of wakes per second in "[kernel scheduler] Load balancing tick" on Core 2 Duo even with only 1 core enabled

[Andrew Henry]

In post #17 I said I had a HP that I never had an issue with.  I
didn't...with Ubuntu 9.10.  I did a fresh install of 10.04 and have
exactly the same issue.  Different CPU, different wireless adapter etc.
Obviously, this is a kernel issue and not hardware specific.

-- 
Tens of wakes per second in "[kernel scheduler] Load balancing tick" on Core 2 
Duo even with only 1 core enabled
https://bugs.launchpad.net/bugs/524281
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 524281] Re: Tens of wakes per second in "[kernel scheduler] Load balancing tick" on Core 2 Duo even with only 1 core enabled

[Andrew Henry]

I had a HP laptop with Intel Core 2 Duo 7200 and this was never an
issue.  With Ubuntu 10.04 on a Thinkpad Edge 13 with Intel Core2Duo CULV
CPU this is an issue.

-- 
Tens of wakes per second in "[kernel scheduler] Load balancing tick" on Core 2 
Duo even with only 1 core enabled
https://bugs.launchpad.net/bugs/524281
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 573496] Re: laptop doesn't go into suspend mode when lid closed

[Andrew Henry]

** Attachment added: "dmesg"
   http://launchpadlibrarian.net/47191575/dmesg

-- 
laptop doesn't go into suspend mode when lid closed
https://bugs.launchpad.net/bugs/573496
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 573496] [NEW] laptop doesn't go into suspend mode when lid closed

[Andrew Henry]

Public bug reported:

Binary package hint: gnome-power-manager

Running Lucid Lynx Release version on a Thinkpad Edge 13" Intel NUD2EMS.

I set Power Manager to go into suspend when I shut the lid but it only
blanks the screen.  If I manually click on the Off button in the panel
and choose suspend then it works ok.

** Affects: gnome-power-manager (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: edge gpm lucid suspend thinkpad

-- 
laptop doesn't go into suspend mode when lid closed
https://bugs.launchpad.net/bugs/573496
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 549289] Re: [Conexant CX20582 (Pebble)] Playback problem - sound from speakers when headphones plugged in, or both in headphones and speakers

[Andrew Henry]

Added bug report Bug #573493 for my SSID

-- 
[Conexant CX20582 (Pebble)] Playback problem - sound from speakers when 
headphones plugged in, or both in headphones and speakers
https://bugs.launchpad.net/bugs/549289
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 573493] Re: No sound from headphone jack

[Andrew Henry]

** Attachment added: "subsystemid"
   http://launchpadlibrarian.net/47190834/subsystemid

** Tags added: edge thinkpad

** Tags added: lucid

-- 
No sound from headphone jack
https://bugs.launchpad.net/bugs/573493
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 573493] [NEW] No sound from headphone jack

[Andrew Henry]

Public bug reported:

As a follow on from bug #549289;

No sound from headphone jack but following code fixes the problem:

/etc/modprobe.conf/alsa-base.conf


options snd-hda-intel model="olpc-xo-1_5"


Subsystem ID from my /proc/asound/card0/codec#0 is:

Codec: Conexant CX20582 (Pebble)
Address: 0
Function Id: 0x1
Vendor Id: 0x14f15066
Subsystem Id: 0x17aa21b4
Revision Id: 0x100300

And my lspci says:

and...@fuji:~$ lspci
...
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio 
Controller (rev 03)
...

** Affects: alsa-driver (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: edge lucid thinkpad

-- 
No sound from headphone jack
https://bugs.launchpad.net/bugs/573493
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 549289] Re: [Conexant CX20582 (Pebble)] Playback problem - sound from speakers when headphones plugged in, or both in headphones and speakers

[Andrew Henry]

and...@fuji:~$ lspci
...
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio 
Controller (rev 03)
...

Do I really need to open a new bug report?

-- 
[Conexant CX20582 (Pebble)] Playback problem - sound from speakers when 
headphones plugged in, or both in headphones and speakers
https://bugs.launchpad.net/bugs/549289
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 552020] Re: multi core laptop system overheating, powertop showing a lot [Rescheduling interrupts]

[Andrew Henry]

here is my powertop output for this problem

** Attachment added: "powertop-output"
   http://launchpadlibrarian.net/46007764/powertop-output

-- 
multi core laptop system overheating, powertop showing a lot [Rescheduling 
interrupts] 
https://bugs.launchpad.net/bugs/552020
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 549289] Re: [Conexant CX20582 (Pebble)] Playback problem - sound from speakers when headphones plugged in, or both in headphones and speakers

[Andrew Henry]

On 17/04/10 18:17, chezka wrote:
> I add the following line to the end of my modprobe.conf
>
> 
> options snd-hda-intel model="olpc-xo-1_5"
> 
>
> That worked for my Edge 13 amd (Arch Linux :)).
>


Thanks a lot for that tip, it worked perfectly for me on Ubuntu 10.04 on 
my Edge Intel 13".

But the file on Ubuntu 10.04 is:

/etc/modprobe.conf/alsa-base.conf

-- 
[Conexant CX20582 (Pebble)] Playback problem - sound from speakers when 
headphones plugged in, or both in headphones and speakers
https://bugs.launchpad.net/bugs/549289
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 539912] Re: [lucid] current battery charge not easily accessable

[Andrew Henry]

Some people prefer time (like me) when the battery is discharging and
percent when on mains, and some people prefer percentage all the time.
It must be possible to have both as options!

Does the battery actually stop charging when it reaches 100% or does the
mains cable constantly charge the battery?

Is there a way using gpm to only charge the battery when it drops below
a certain percent?  I cannot find info on this anywhere.

-- 
[lucid] current battery charge not easily accessable
https://bugs.launchpad.net/bugs/539912
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 561500] Re: Cursor moves up when moving down on trackpad

[Andrew Henry]

... and of course it stopped doing this after the nightly upgrades.  How
do you close a bug again?

-- 
Cursor moves up when moving down on trackpad
https://bugs.launchpad.net/bugs/561500
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 178038] Re: npviewer.bin crashed with SIGSEGV

[Andrew Henry]

me too...

Ubuntu 10.04 Lucid amd64 beta2 with daily updates.  Still crashing as
per JosephB's comments.

-- 
npviewer.bin crashed with SIGSEGV 
https://bugs.launchpad.net/bugs/178038
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 561500] [NEW] Cursor moves up when moving down on trackpad

[Andrew Henry]

Public bug reported:

Binary package hint: xserver-xorg-input-synaptics

Thinkpad Edge 13 laptop.  Installed Lucid beta1 and no issues.  beta2 ok
as well, but recent updates now cause the pointer to move up the screen
by a couple of inches before starting to move down again.  The Thinkpad
Trackpoint is still working OK.

** Affects: xserver-xorg-input-synaptics (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: beta2 lucidlynx

-- 
Cursor moves up when moving down on trackpad
https://bugs.launchpad.net/bugs/561500
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 552880] Re: thinkpad edge - detected unsupported model

[Andrew Henry]

im also getting this after doing some beta2 updates.  Beta1 did not give
me any visible issues.

Booting up drops me to consle view, says unsupported Thinkpad, then
continues, but sometimes I get a low graphics mode X-Windows, which a
warm reboot sometimes solves.

-- 
thinkpad edge - detected unsupported model
https://bugs.launchpad.net/bugs/552880
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 108623] Re: totem isn't buffering correctly

[Andrew Henry]

status confirmed, Won't fix !?!?

Can someone please investigate this issue further.  Whether it is a
Totem bug, Gnome bug, Gstreamer bug, we still need to know so that it
can be pushed upstream.  There is no indication at gnome bugs on the
link at the top of the page or here, where the issue lies!

I am using Ubuntu 9.10 amd64 and STILL have this issue when playing
Quicktime trailers or ISO/MKV files on my LAN (wireless).

VLC in Ubuntu 9.10 can play the same ISO over the wireless LAN with next to no 
buffering/stuttering issues, but Totem-gstreamer has major stuttering issues, 
probably due to the buffering problem mentioned in this bug.
Playing Quicktime trailers at Standard Def are OK, but play a 480p HD trailer 
and it can start stuttering after 10-20s or so, and when it gets to that point, 
it will just buffer continuously and play 1-2s clips until the buffer runs out 
and then re-buffer.  Playing 720p is even worse.

I edited gconf-editor and set the buffer_size=5 and
network_buffer_threshold=4 and this enabled 480p trailers to work, but
when playing 720p the issue still exists.  My settings did take effect,
and now it buffers 5s and then when the buffer runs out it buffers
another 4s and plays that but bever gets to the point where it can play
without stopping to rebuffer.

I have a 24Mbit broadband connection and can download a steady 1.6MB/s
without issue.  I tested this in the morning on a weekday when Quicktime
trailers is probably not so utilised.

I assume that the only way to fix this is to set buffer_size=30 seconds
to cope with large amounts of video data when streaming.  But the
buffering in Totem is inherently broken and should be fixed.  The way
the two settings I mention above work appear to function as intended and
expected (little hard to tell actually), but "the Totem pipe is too
thin" is the feeling I get.  How come VLC and Mplayer can buffer more
and display less stuttering?  Do they buffer in the background? buffer
more?  I have Totem set to connection_speed=11 by the way, for LAN.

One other broken function in Totem is that when I pause the Quicktime
trailer (in the hope it will contine buffering the rest of the movie),
it just stops downloading entirely.

That this problem has existed since Fesity is just amazing.

-- 
totem isn't buffering correctly
https://bugs.launchpad.net/bugs/108623
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 343067] Re: Playing a DVD iso in totem causes the iso to be mounted in .gvfs and not played.

[Andrew Henry]

Hi.

I have exacly the same issue.

Running 9.04 amd64 which was upgraded from 8.10 amd64.  It worked fine
in 8.10 and now does not in 9.04.

I have all the gstreamer plugins installed (good,bad,ugly,gnolin etc)
and libdvdcss, and previously I could drag an ISO to the totem window
for it to play.  Then with the 8.10 release (I think) I could right
click an ISO and play it in totem, as well as play an ISO over an SSH
link, which was great.

Now in Ubuntu 9.04 it seems playing ISO is indeed broken.  I start it
from terminal and do not get any errors when it fails to play the DVD.
I do not think that this issue should be simply fobbed off to upstream.
There are other grave packaging errors with totem in Ubuntu 9.04, such
as the upnp mess.  It is not unlikely that this is also an Ubuntu bug
and not an upstream.  If we just forward this to upstream it's not going
to go anywhere.  It makes more sense that Canonical looks at it first to
decide if it is upstream or not rather than just passing the buck
immediately.

-- 
Playing a DVD iso in totem causes the iso to be mounted in .gvfs and not played.
https://bugs.launchpad.net/bugs/343067
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 248635] Re: acer_wmi is not used by default (on Fujitsu Siemens Amilo A1650G)

[Andrew Henry]

I have an Acer Aspire 5021 and did a HOWTO for Dapper Drake years ago
for getting the wireless working with acer_acpi 0.3 and bcm43xx.

I have been using this old laptop as a server running CentOS for the
last few years and just reinstalled it with Ubuntu 8.10 Desktop 64-bit.

I enabled the B43 proprietary driver after the fresh install, but the
'acer_acpi' bit isn't working.  I used acer_acpi 0.3 at the time of
dapper drake, so did some searching, found newer 0.11.2 acer_acpi, found
that it is replaced with acer_wmi, and then found this bug, that
acer_wmi should be working by default on Acer laptops.

It doesn't.

will try modprobing acer_wmi tonight.

-- 
acer_wmi is not used by default (on Fujitsu Siemens Amilo A1650G)
https://bugs.launchpad.net/bugs/248635
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 288868] Re: terminal server client disables mouse on desktop

[Andrew Henry]

I know that everyone has already told me that this is not a graphics driver
issue, but I'm telling you that uninstalling the Nvidia driver, and using
the open nv driver solved this issue for me.  I then re-installed the nvidia
driver and it was still 'solved'.

Before anyone else tells me that im full of c**p, has anyone else tried
this?

-- 
terminal server client disables mouse on desktop
https://bugs.launchpad.net/bugs/288868
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 288868] Re: terminal server client disables mouse on desktop

[Andrew Henry]

Korax wrote:
> Andrew, are you pressing "Enter" key to connect or clicking the mouse on
> the Connect button?
>
> It appears to only occur when Computer field is focused and Enter is
> pressed
>
>   
I press the Connect button, but then I get a small password entry
dialogue where I type in the password for the VNC session.

-- 
terminal server client disables mouse on desktop
https://bugs.launchpad.net/bugs/288868
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 288868] Re: terminal server client disables mouse on desktop

[Andrew Henry]

Christian Kirbach wrote:
> problem is definitely unrelated to graphics drivers, I see this on three
> different machines.
>
>   
Ok, maybe it is unrelated, but I uninstalled nvidia driver 177 and used
the nv driver and it worked.  Then I re-installed nvidia driver 177 and
it still works, consistently.  That is strange even if the problem is
not graphics related, isn't it?  Now I have tried a VNC session over 10
times between reboots and it has not crashed at all, no matter whether
the mouse pointer is outside or inside the eventual VNC window.

-- 
terminal server client disables mouse on desktop
https://bugs.launchpad.net/bugs/288868
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 280664] Re: Totem-gstreamer does not play home-made ISO files

[Andrew Henry]

*** This bug is a duplicate of bug 41335 ***
https://bugs.launchpad.net/bugs/41335

Pedro Villavicencio wrote:
> *** This bug is a duplicate of bug 41335 ***
> https://bugs.launchpad.net/bugs/41335
>
> Thanks for the bug report. This particular bug has already been reported
> into our bug tracking system, but please feel free to report any further
> bugs you find.
>
> ** Changed in: totem (Ubuntu)
>Status: New => Invalid
>
> ** This bug has been marked a duplicate of bug 41335
>DVD playing is not working correctly with totem-gstreamer
>
>
Hi Pedro!

I respectfully disagree.  The bug that this is supposedly a duplicate of
is regarding DVD playback in Totem with fast forward/rewind and menus
not working.  My bug regards the ability to play ISO files that I have
made myself.

If I get a raw DV file that I have recorded myself, it will play in
Totem-gstreamer.  I can then convert the same file to MPEG-2 and it will
play in Totem-gstreamer, but as soon as I create an ISO file of that
MPEG-2 file, it will not play in Totem-gstreamer.  Totem-gstreamer has
no issues playing other ISO files that contain MPEG-2 video (admittedly,
menus and controls do not work, but my ISOs do not play whatsoever).

I would have logged this as a bug with dvdauthor, but then I found out
that my ISO would play without issue in Mplayer and VLC, so this is
obviously a Totem-gstreamer issue.

Kind regards,
Andrew

-- 
Totem-gstreamer does not play home-made ISO files
https://bugs.launchpad.net/bugs/280664
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 288868] Re: terminal server client disables mouse on desktop

[Andrew Henry]

damn it.  I was having the same problem, and saw the post above about
killing tsclient, and thought that would solve the problem.

However, I had just uninstalled the nVidia proprietary driver and
installed the free nv driver because I was having performance problems
on my desktop and wanted to see if they were caused by the driver.  So
there I was running the nv driver, and I started vnc via tsclient to
test out the above tip, and what do you know!!  It didn't crash!  Seems
like this problem is possibly caused by the nVidia driver, which is a
real bummer because it's the only way of getting suspend to ram to work
:(

Seems like I had the opposite effect to others here, but now my VNC
works fine with nv driver.  Just one more comment: tsclient VNC has
ALWAYS worked for me to another computer: a CentOS 5.2 server.  Now I
tried to VNC to Ubuntu Server 8.10 and it was only this that was
hanging... CentOS was still working fine.

-- 
terminal server client disables mouse on desktop
https://bugs.launchpad.net/bugs/288868
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 248219] Re: [intrepid] Intel Wireless 4965 AGN dell 1420 Dosn't work

[Andrew Henry]

I just tried Intrepid beta last night on a Lenovo Thinkpad T61 that has
an Intel PRO wireless 4965 AGN and it does not work.  No wireless
networks found.

I have a HP Pavilion dv9297ea with an Intel PRO wireless 3945 and
Intrepid beta works OK on that computer and NetworkManager 0.7.0 can see
all wireless networks.

Has the fix regressed again?

-- 
[intrepid] Intel Wireless 4965 AGN dell 1420 Dosn't work
https://bugs.launchpad.net/bugs/248219
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 280664] [NEW] Totem-gstreamer does not play home-made ISO files

[Andrew Henry]

Public bug reported:

I have an issue playing home made ISO files with Totem in Ubuntu 8.04.
ISO files that are DVD copies ripped with k9Copy play just fine as do
most (but not all) other DVD ISO copies I have downloaded.  DV file from
camcorder converted to mpeg with ffmpeg, then authored with dvdauthor
and mkisofs does not play in Totem, but plays just fine in both VLC and
Mplayer (all software from Ubuntu repos, none are built manually).

Here are the commands I use to make the ISO from a DV file:

ffmpeg -i file.dv -threads 2 -mbd rd -flags +trell -cmp 2 -subcmp 2 -g
100 -pass 1/2 -target pal-dvd /tmp/file.mpg

 dvdauthor -o /tmp/DVD/ -t --video=720x576+pal+16:9
--audio=ac3+en --file=/tmp/file.mpg

 dvdauthor -o /tmp/DVD/ -T

 mkisofs -dvd-video -o file.iso /tmp/DVD/

and here is the output I get when trying to play the file in totem as
root (I do "sudo bash" first to get root shell, as playing it as the
file owner simply says I do not have permissions):

[EMAIL PROTECTED]:~/movies# totem legoclip.iso

** (totem:3387): WARNING **: Failed to create dbus proxy for 
org.gnome.SettingsDaemon: Could not get owner of name 
'org.gnome.SettingsDaemon': no such name
** Message: Error: Could not open resource for reading.
vcdsrc.c(421): gst_vcdsrc_start (): /play/source:
system error: Inappropriate ioctl for device

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
Totem-gstreamer does not play home-made ISO files
https://bugs.launchpad.net/bugs/280664
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 82528] Re: Write load on DM-Crypt LUKS partition with reiserfs jams system

[Andrew Henry]

Celso Pinto wrote:
> Right, I'm a bit hot headed now so bear with me: I've just shut down my
> laptop, which was applying Hardy's upgrades (152 IIRC), because as soon
> as it started to actually install the packages my desktop completely
> locked up. I put up with it for about *30 f** minutes* until I
> decided I actually needed to get some work done instead of watching the
> disk access led blinking while kcryptd did it's stuff. Come on guys!
> Come on! I replaced openSUSE 10.3 which also had luks encryption and was
> a whole lot more responsive with Hardy to give it a shot. 


I feel your pain man.  Seems like they focus on other things, and this
is not a hot feature in the marketplace.  To be fair though, isn't this
a kernel issue?  Maybe Novell do extra fixes in their kernels to get
certain features working, whilst Canonical focuses on desktop stuff. 
Suppose that if we want a working dmcrypt, then we need to stick to
Suse/Redhat.  I swapped to CentOS5 on my server just because of this
issue (not dmcrypt, as it sucks as bad there cause its an old kernel,
but there is more focus on the server side than I think canonical does).

--andrew

-- 
Write load on DM-Crypt LUKS partition with reiserfs jams system
https://bugs.launchpad.net/bugs/82528
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 82528] Re: Write load on DM-Crypt LUKS partition with reiserfs jams system

[Andrew Henry]

Ulrich Lukas wrote:
> I already reported it on the Linux kernel Bugzilla.
>
> Have you tried the latest release-version of the Linux kernel?
>
> Please try it and compile 2.6.24-rc4 if you can. This bug is supposed to
> be fixed with that kernel version.
I compiled 2.6.23.9 and this seems to have fixed the problem.  disk
transfers still take 100% CPU according to gnome-system-monitor (but
kcryptd/0 takes 60% according to top), but disk activity is now fast and
constant.

Thanks for the tip!

-- 
GnuPG Key ID: ECB18ABA
Fingerprint:  FDF3 91FC F5BC 1164 E217  315E 337E 219B ECB1 8ABA

-- 
Write load on DM-Crypt LUKS partition with reiserfs jams system
https://bugs.launchpad.net/bugs/82528
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 82528] Re: Write load on DM-Crypt LUKS partition with reiserfs jams system

[Andrew Henry]

-- 
Write load on DM-Crypt LUKS partition with reiserfs jams system
https://bugs.launchpad.net/bugs/82528
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 82528] Re: Write load on DM-Crypt LUKS partition with reiserfs jams system

[Andrew Henry]

I have exactly the same problem on a newly installed Debian Etch system
that was fully encrypted (except /boot) using the guided partitioner.  I
have an external WD MyBook 320GB 1394a disk that was unencrypted.
Performance was fine to the 1394a disk (both read/write speeds as well
as LAN transfer rates) until I encrypted it then I get exactly the same
issues:

LAN performance both read and write is almost exactly halved.  11MB to 6MB 
ethernet and 2.5MB to 1.5MB read wireless.
Writes to 1394a the disk overload the CPU so that mouse pointer hangs every few 
seconds.
Writes to 1394a disk don't write at a steady rate, but suspend (no CPU) then 
after a while continue.  kjournal and kcryptd/0 are the 2 processes taking all 
the CPU, but when the write suspends, they drop to zero.
Read rate is constant but rate is halved.

Does not seem Ubuntu related or related to that particular kernel as
Etch does not use same kernel as Feisty or Gutsy.

-- 
Write load on DM-Crypt LUKS partition with reiserfs jams system
https://bugs.launchpad.net/bugs/82528
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 82528] Re: Write load on DM-Crypt LUKS partition with reiserfs jams system

[Andrew Henry]

as this does not seem Ubuntu related, I think its very unlikely
Canonical will do anything with this bug.  Probably better putting it on
dmcrypt or kernel lists?

-- 
Write load on DM-Crypt LUKS partition with reiserfs jams system
https://bugs.launchpad.net/bugs/82528
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 151544] Re: [Gutsy] GNOME takes too much time to load during system boot

[Andrew Henry]

Balaji wrote:
> 1. Ubuntu support is not taking enough action on this bug. This should be a
> priority. It is a shame to the Ubuntu makers that they can't give an
> important bug its rightful place.
>   
I agree that Canonical "attendance" on Launchpad seems quite poor, going
from the bugs i have followed.  I do not even think there has been a
Canonical response to this bug yet!  I said this earlier, but here it is
again: This issue was totally fixed for me on two seperate laptops
running amd64 Gutsy one day last week when a few updates came through
Update Manager, and I use full Compiz, AWN and have nVidia Go 7600 on
one of the laptops..  So if people have updated and still get this issue
then it must have different reasons, but obviously someone is trying to
fix it despite lack of communication on launchpad.  By the way,
disabling ipv6 didn't do squat for me.  I think it was the updates that
upgraded Gnome to 2.20.1 that did it.
> 2. They are simply beating around the bush to try to transfer the blame to
> someone else. It is the kernel that is the culprit. The 386 kernel is very
> very slow and I find that the generic kernel is not very much improved
> either. The older kernel 2.6.17 or 2.6.20 were way better. Even now, if you
> try using those kernels, GNOME loads fast.
>
> Clearly it is a problem with the kernel. 

How do you come to this conclusion?  My first thought would be GDM but
no, I am not sure either.  To jump to the conclusion that it is the
kernel is a bit of a long shot though.
> It is the haughtiness of the kernel
> writers that they fail to recognized the problem and fix it. When Ubuntu has
> almost no market share as against Microsoft, these guys act so pricey and
> all as if they know everything about the problem and keep throwing the blame
> from one to another. I have no doubt that they can NEVER EVER stand
> Microsoft's competition, if things go down the path of ruin in this manner.
>
> There is NOTHING (I wish I could write in bigger letters to make it clear)
> significantly useful added in Gutsy at all. Why did they make this release?
> Most people have gone back to Feisty. I don't want Compiz or any other
> BULLSHIT - what I want is a fast useful machine.
>
>   
They make new releases simply because Debians unstable repos have been
significantly updated ;)  I think they relied too much on this fact with
Gutsy and I don't really see anything that Canonical have *added* to
Gutsy besides the stuff that came through from Debian.  But then again,
there is so much to monitor and I only look at what interests me, which
i suspect most people do.  But don't be fooled by the blandness of the
desktop!  Yes, it may look like Fiesty but don't forget that all
packages are newer versions.  To think that the desktop should look
significantly different between releases is a side effect of having used
Windows too long!  Linux is a progressive development and many of the
tools I use have fixed issues I had in previous releases or added new
functions that I now use.
> Balaji
>   

-- 
GnuPG Key ID: ECB18ABA
Fingerprint:  FDF3 91FC F5BC 1164 E217  315E 337E 219B ECB1 8ABA

-- 
[Gutsy] GNOME takes too much time to load during system boot
https://bugs.launchpad.net/bugs/151544
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 151544] Re: [Gutsy] GNOME takes too much time to load during system boot

[Andrew Henry]

I think this may have been fixed now!  I just downloaded some updates
today but it was a while since I last updated..maybe 2-3 weeks, and now
on my server (Acer Aspire) login is just as fast as Fiesty.

All this stuff about ipv6, bluetooth and Compiz seem like red herrings.

-- 
[Gutsy] GNOME takes too much time to load during system boot
https://bugs.launchpad.net/bugs/151544
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 151544] Re: [Gutsy] GNOME takes too much time to load during system boot

[Andrew Henry]

Now I upgraded my HP Pavilion dv9297ea (Core2Duo 7200, 2GB RAM, nVidia
Go 7600) from Feisty amd64 to Gutsy amd64 and I get the same problem as
I had with my Acer Aspire... a much longer login time than with Feisty.
>From login box to working desktop takes much longer than with Feisty.

-- 
[Gutsy] GNOME takes too much time to load during system boot
https://bugs.launchpad.net/bugs/151544
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 162633] Brightness keeps resetting to max [Gutsy]

[Andrew Henry]

Public bug reported:

I just upgraded a HP Pavilion dv9297ea from Feisty to Ubuntu Gutsy amd64
yesterday.  Using nVidia proprietary drivers from the repos.  Since
upgrading, there seems to be more controls for controlling the
brightness depending on whether im using AC or battery.  I had the AC
plugged in all the time and I manually lowered the brightness to under
50% but the brightness kept resetting to max.

It seems to be triggered by something, like using certain apps.  I did
not test thoroughly enough, so maybe I should leave system running
without using it to see if it resets.  It does not reset immediately,
but it happened to me 4 or 5 times during one hour of using my laptop.

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
Brightness keeps resetting to max [Gutsy]
https://bugs.launchpad.net/bugs/162633
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 155393] Re: Internet extremely slow in Gutsy after upgrade

[Andrew Henry]

I experience that web browsing is noticeably slower in Gutsy then
Feisty, but I also have another issue that is probably just another
symptom... Firefox seems to get halfway through loading a page, then
'hangs' on one item (not always the same item) and Firefox then turns
gray for several seconds up to several minutes before continuing.  Half
of the time, Firefox eventually loads the entire page, but sometimes it
hangs indefinitely.  This is on amd64

I had to install 32-bit Firefox 2.0.0.8 to get Java 1.6 and I have not
yet experienced any hangs whilst browsing.  Is this an amd64 issue?

-- 
Internet extremely slow in Gutsy after upgrade
https://bugs.launchpad.net/bugs/155393
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 151952] Re: suspend to ram broke after upgrade from 2.6.20-16-generic to 2.6.22.14 [gutsy]

[Andrew Henry]

I also have the same problem.  Using a HP Pavillion dv9297ea with Intel
ICH7, 3945ABG and nVidia Go 7600 and nVidia proprietary graphics driver
from the repos.  All worked in Feisty, but upon resuming I got a warning
message, but after upgrading to Gutsy, it never wakes up the display.

-- 
suspend to ram broke after upgrade from 2.6.20-16-generic to 2.6.22.14 [gutsy]
https://bugs.launchpad.net/bugs/151952
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 151544] Re: [Gutsy] GNOME takes too much time to load during system boot

[Andrew Henry]

A "me too" comment.

Acer Aspire 5021WLMi, was running Ubuntu Fiesty and upgraded to Gutsy.
Since upgrade gdm login takes a long time.

I also have another issue, that I do not know if others have.  Logging
into GDM works once.  It takes quite a while.  If I log out and try to
login a second time, the panels and applets never appear.  Login hangs
and I need to reboot.   Restarting gdm from a tty does not help.

-- 
[Gutsy] GNOME takes too much time to load during system boot
https://bugs.launchpad.net/bugs/151544
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 144390] Re: use entire disk with lvm/encrypted partitioning fails to boot

[Andrew Henry]

Is this going to make it into the final 7.10??

By the way, how do I get into the busybox shell??  It does not drop into
this shell after 60s, but I am running in splash mode I guess...How do I
boot in text mode?  I do not see *anything* before the 'hang'...no grub,
no nothing (yes I have an unencrypted /boot).

-- 
use entire disk with lvm/encrypted partitioning fails to boot
https://bugs.launchpad.net/bugs/144390
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 88546] Re: headphones jack doesn't mute speakers on lenovo 3000 n100

[Andrew Henry]

Aleksander Kamil Modzelewski wrote:
> I had no problems on feisty since some time (with Lenovo N100), but on
> 2.6.22-3 on Gutsy the problem is back. *SIGH*
>
>   
yeah, I noticed that this problem disappeared for me too which im happy
about.

-- 
GnuPG Key ID: ECB18ABA
Fingerprint:  FDF3 91FC F5BC 1164 E217  315E 337E 219B ECB1 8ABA

-- 
headphones jack doesn't mute speakers on lenovo 3000 n100
https://bugs.launchpad.net/bugs/88546
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 98703] Re: Xorg nv driver no longer works at 1440x900

[Andrew Henry]

I am very surprised at this bug.  If several people have confirmed that
Timos patch fixed the problem, then why has it been a month and still no
fix in the repositories?  Why has this been set back to unconfirmed?
Could you please explain further Sitsofe?

-- 
Xorg nv driver no longer works at 1440x900
https://bugs.launchpad.net/bugs/98703
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 98703] Re: Xorg nv driver no longer works at 1440x900

[Andrew Henry]

Actually, i'm happy with the positive confirmations so far for i386.  I
am forced to use nvidia glx driver for time being so this no longer
directly affects me but I am assuming that the fix Timo released will
also be released for amd64?  As long as this makes it into a bugfix
release through Update Manager for Feisty then im happy.

However, maybe other users do require the fix for amd64?

-- 
Xorg nv driver no longer works at 1440x900
https://bugs.launchpad.net/bugs/98703
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 80829] Re: hdparm gives low throughput on Intel SATA systems

[Andrew Henry]

just to add, maybe this performance is ok, but when watching movies from
CD which shows as /dev/scd0, playback is very choppy.  If dma is enabled
on all SATA devides, then maybe this is something else.

-- 
hdparm gives low throughput on Intel SATA systems
https://bugs.launchpad.net/bugs/80829
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 80829] Re: hdparm gives low throughput on Intel SATA systems

[Andrew Henry]

im running 2.6.20-13 and dma and 32bit IO cannot be enabled on my SATA
drives (HDD and DVD).  hdparm fails with:

[EMAIL PROTECTED]:~$ sudo hdparm -c1 -d1 /dev/scd0

/dev/scd0:
 setting 32-bit IO_support flag to 1
 HDIO_SET_32BIT failed: Invalid argument
 setting using_dma to 1 (on)
 HDIO_SET_DMA failed: Inappropriate ioctl for device
 IO_support   =  0 (default 16-bit)


Can hdparm really be used for SATA drives??  I installed sdparm and it looks 
like this utility is more suited to SATA, but I cannot find out how to enable 
32bit IO, and it looks like DMA is already enabled anyway on SATA drives.

Anyway, I get:

[EMAIL PROTECTED]:~$ sudo hdparm -t /dev/sdb

/dev/sdb:
 Timing buffered disk reads:  126 MB in  3.02 seconds =  41.66 MB/sec
[EMAIL PROTECTED]:~$

-- 
hdparm gives low throughput on Intel SATA systems
https://bugs.launchpad.net/bugs/80829
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 102473] Gnomebaker wont burn/wipe CDRW since Beta, worked in herd5

[Andrew Henry]

Public bug reported:

Binary package hint: gnomebaker

Gnomebaker in Herd5 could succssfully burn a CDRW and quick format it,
but since Beta and latest updates as of 2007-04-03, it cannot do either.

Laptop is HP Pavilion dv9297ea
Gnomebaker 0.6.0


Output of blanking a CD (very similar for writing disc):

scsidev: '4,0,0'
scsibus: 4 target: 0 lun: 0
TOC Type: 1 = CD-ROM
scsidev: 'ATA:4,0,0'
devname: 'ATA'
scsibus: 4 target: 0 lun: 0
wodim: No such file or directory. 
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.


Output of 'wodim --devices'

[EMAIL PROTECTED]:~/Photos$ wodim --devices
Beginning native device scan. This may take a while if devices are busy...
wodim: Overview of accessible drives (1 found) :
--
0dev='/dev/sr0'   rwrw-- :  'HL-DT-ST'  'DVDRAM GSA-4084N'
--

** Affects: gnomebaker (Ubuntu)
 Importance: Undecided
 Status: Unconfirmed

-- 
Gnomebaker wont burn/wipe CDRW since Beta, worked in herd5
https://bugs.launchpad.net/bugs/102473
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 100085] Re: [apport] gthumb crashed with SIGSEGV in gtk_tree_model_get_valist()

[Andrew Henry]

** Attachment added: "CoreDump.gz"
   http://librarian.launchpad.net/7112830/CoreDump.gz

** Attachment added: "Dependencies.txt"
   http://librarian.launchpad.net/7112831/Dependencies.txt

** Attachment added: "Disassembly.txt"
   http://librarian.launchpad.net/7112832/Disassembly.txt

** Attachment added: "ProcMaps.txt"
   http://librarian.launchpad.net/7112833/ProcMaps.txt

** Attachment added: "ProcStatus.txt"
   http://librarian.launchpad.net/7112834/ProcStatus.txt

** Attachment added: "Registers.txt"
   http://librarian.launchpad.net/7112835/Registers.txt

** Attachment added: "Stacktrace.txt"
   http://librarian.launchpad.net/7112836/Stacktrace.txt

** Attachment added: "ThreadStacktrace.txt"
   http://librarian.launchpad.net/7112837/ThreadStacktrace.txt

-- 
[apport] gthumb crashed with SIGSEGV in gtk_tree_model_get_valist()
https://bugs.launchpad.net/bugs/100085
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 100085] [apport] gthumb crashed with SIGSEGV in gtk_tree_model_get_valist()

[Andrew Henry]

Public bug reported:

Binary package hint: gthumb

I had created a new Library, then I clicked on the Catalog button in the
left hand pane to view all catalogs (there are none as yet and I have no
photos withing any library or catalog) and the app crashed.

ProblemType: Crash
Architecture: amd64
Date: Mon Apr  2 10:49:50 2007
DistroRelease: Ubuntu 7.04
ExecutablePath: /usr/bin/gthumb
Package: gthumb 3:2.10.0-0ubuntu1
PackageArchitecture: amd64
ProcCmdline: gthumb
ProcCwd: /home/andrew
ProcEnviron:
 PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
 LANG=en_US.UTF-8
 SHELL=/bin/bash
Signal: 11
SourcePackage: gthumb
StacktraceTop:
 gtk_tree_model_get_valist ()
 gtk_tree_model_get ()
 catalog_list_is_search ()
 ?? ()
 g_closure_invoke ()
Uname: Linux everest 2.6.20-13-generic #2 SMP Sat Mar 24 23:12:02 UTC 2007 
x86_64 GNU/Linux
UserGroups: adm admin audio cdrom dialout dip floppy lpadmin netdev plugdev 
powerdev scanner video

** Affects: gthumb (Ubuntu)
 Importance: Undecided
 Status: Unconfirmed

-- 
[apport] gthumb crashed with SIGSEGV in gtk_tree_model_get_valist()
https://bugs.launchpad.net/bugs/100085
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 98902] Re: suspend no longer works, but did previously

[Andrew Henry]

I just realised something...sleep and hibernate both work almost
perfectly when using the proprietary nvidia driver (nvidia-glx).  This
bug applies to the Xorg supplied nv driver.

Linux everest 2.6.20-13-generic #2 SMP Sat Mar 24 23:12:02 UTC 2007
x86_64 GNU/Linux


** Attachment added: "dmesg log"
   http://librarian.launchpad.net/7076369/dmesg.log

-- 
suspend no longer works, but did previously
https://launchpad.net/bugs/98902

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 98902] Re: suspend no longer works, but did previously

[Andrew Henry]

How do you attach multiple log files to one comment??  Do I have to tar
them?

** Attachment added: "lspci log"
   http://librarian.launchpad.net/7076382/lspci-vvnn.log

-- 
suspend no longer works, but did previously
https://launchpad.net/bugs/98902

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 98703] Re: Xorg nv driver no longer works at 1440x900

[Andrew Henry]

Sure, but can you build the patch for amd64?  I don't run i386.

-- 
Xorg nv driver no longer works at 1440x900
https://launchpad.net/bugs/98703

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 98902] suspend no longer works, but did previously

[Andrew Henry]

Public bug reported:

HP Pavilion dv9297ea with Feisty beta.

I had previously installed Herd 5 and suspend and resume both worked.
On wake, I got a crash report, but it was minor...the actual function
worked.  Wifi even worked after waking.

I clean installed Feisty beta and neither suspend nor hibernate work any
more.  On wake, the screen is blank on all tty's and keyboard input
seems to have no effect.

I can see that this bug has previously been reported in edgy, and I have
added a comment to that bug, but just in case edgy bugs are no longer
given priority, I will open a new one here for Feisty.

** Affects: Ubuntu
 Importance: Undecided
 Status: Unconfirmed

-- 
suspend no longer works, but did previously
https://launchpad.net/bugs/98902

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 98703] Re: Xorg nv driver no longer works at 1440x900

[Andrew Henry]

Here they are...

** Attachment added: "xorg.conf"
   http://librarian.launchpad.net/7053840/xorg.conf

-- 
Xorg nv driver no longer works at 1440x900
https://launchpad.net/bugs/98703

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 98703] Re: Xorg nv driver no longer works at 1440x900

[Andrew Henry]

didn't realise you can only attach one file at a time.  here is the xorg
log, and here is lspci output...

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT 
Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT 
Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition 
Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 
(rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 
(rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 
(rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 
02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 
02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 
02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 
02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge 
(rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller 
(rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial 
ATA Storage Controller AHCI (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce Go 7600] 
(rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network 
Connection (rev 02)
05:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet 
Controller
07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832
07:05.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 
SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
07:05.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter 
(rev 0a)
07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)


** Attachment added: "xorg log file"
   http://librarian.launchpad.net/7053852/Xorg.0.log

-- 
Xorg nv driver no longer works at 1440x900
https://launchpad.net/bugs/98703

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 46046] Re: wrong keyboard layout when reconfiguring xserver-xorg

[Andrew Henry]

this bug is still present in Feisty beta!

-- 
wrong keyboard layout when reconfiguring xserver-xorg
https://launchpad.net/bugs/46046

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 98703] Xorg nv driver no longer works at 1440x900

[Andrew Henry]

Public bug reported:

Binary package hint: xserver-xorg-driver-nv

This is a regression from Herd 5...

HP Pavilion dv9297ea with nVidia GeForce Go 7600 running Feisty Beta.  I
had previously installed Herd 5 and Xorg determined that driver should
be vesa at 1024x768 on fresh install.

Installed beta from scratch (no upgrade) and Xorg determined nv driver
at 1440x900 (correct resolution).  I have been using nv driver up until
today at 1440x900 but I installed latest updates today which have
probably been released in last 5 days, and the new driver no longer
works at 1440x900.  It is set to 1280x800 after installing updates, and
doing 'sudo dpkg-reconfigure -phigh xserver-xorg ' to select 1440x900
seems to work (xorg.conf looks ok) but still it maxes out at 1280x800.
I see this under Preferences|Screen Resolution.

I tried editing xorg.conf by hand as well as with dpkg-reconfigure, to
only select 1440x900 resolution at all colour depths, but when
rebooting, Screen Resolution gui tool shows that 1280x800, 1024x768,
800x600 and 640x480 are available.  I have to install nvidia-glx driver
to get correct resolution again.

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: Unconfirmed

-- 
Xorg nv driver no longer works at 1440x900
https://launchpad.net/bugs/98703

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 88546] Re: headphones jack doesn't mute speakers on lenovo 3000 n100

[Andrew Henry]

I have same problem with HP Pavilion dv9297ea but I have a workaround
(see laptop testing page, community supplied laptops for full report).

Basically, press mute, plug in phones, then unmute.  sound comes through
phones and not main speaker.  To reverse, press mute, unplug phones,
then unmute...sound now comes through main speakers again.

-- 
headphones jack doesn't mute speakers on lenovo 3000 n100
https://launchpad.net/bugs/88546

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 92151] Re: DELL Inspiron 8600 no longer resumes in feisty

[Andrew Henry]

same here...HP Pavilion dv9297ea, and sleep function does not work as of
feisty beta with 2.6.20-13 but worked fine with herd 5 <=2.6.20-12

-- 
DELL Inspiron 8600 no longer resumes in feisty
https://launchpad.net/bugs/92151

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 63418] Re: CPU soft lockup during boot if ipw3945 kill switch is on

[Andrew Henry]

Working fine for me now in 2.6.20-12.

-- 
CPU soft lockup during boot if ipw3945 kill switch is on
https://launchpad.net/bugs/63418

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 59715] Re: alsa snd-hda-intel hp laptops

[Andrew Henry]

I have a workaround for this bug...

Play the movie clip without headphones plugged in, press the mute
button, then plug in the headphones.  Press the mute button again to
unmute.  sound will then only come through headphones.

To reverse the procedure... (must be done otherwise when you remove
headphones, no sound will come through main speakers, but if you plug in
the phones again, sound comes through main speakers)... press the mute
button, then remove the phones then unmute, to get sound through main
speakers.

This worked for me in Feisty Herd 5 on a HP Pavilion dv9297ea with Totem
Movie Player.

-- 
alsa snd-hda-intel hp laptops
https://launchpad.net/bugs/59715

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 54294] Re: Failed to allocate mem resource #6 ...

[Andrew Henry]

I get the exact same error (cannot allocate resource region 7 & 8) on
both a 1.5 yr old Acer Aspire 5021WLMi and a brand new HP DV9297ea.  I
do not think I have the latest BIOS update for the HP--there is an F.15
version and I have F.14--and I have never upgraded the Acer BIOS, but
the HP was manufactured in feb 2007, so why would a BIOS update help?
Is there any more specific info you can give Ben, that leads you to
recommend a BIOS update?

-- 
Failed to allocate mem resource #6 ...
https://launchpad.net/bugs/54294

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 83170] Re: [apport] vbetool crashed with signal 5

[Andrew Henry]

me too...

HP Pavilion dv9297ea running Feisty Herd 5 amd64 with nvidia-glx driver.
Suspend works, but upon resume, vbetool generates crash report.  Other
than that, resume works ok.

-- 
[apport] vbetool crashed with signal 5
https://launchpad.net/bugs/83170

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 63418] Re: CPU soft lockup during bootup

[Andrew Henry]

Steve White wrote:
> Andrew,
>
> Judging from the on-line documentation, the HP dv9297ea has a wireless
> button on the front panel, which should turn off all the laptop radio
> devices.
>
> The question is, will Linux completely boot, while the wireless radio is
> turned off using this switch?
>
>   
Ah.  I misunderstood.  Well, it doesn't work when I turn off wireless: 
bootup hangs with soft lockup on CPU#0.

sorry.

-- 
GnuPG Key ID: ECB18ABA
Fingerprint:  FDF3 91FC F5BC 1164 E217  315E 337E 219B ECB1 8ABA

-- 
CPU soft lockup during bootup
https://launchpad.net/bugs/63418

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 63418] Re: CPU soft lockup during bootup

[Andrew Henry]

peyote77 wrote:
> kubuntu edgy updated. Same problem with a toshiba laptop Tecra A7 239.
>
>   
Just bought a new HP Pavilion dv9297ea with an Intel 3945 wireless
chipset.  Installed Ubuntu Feisty Fawn Herd 5 and wireless works out of
the box with NetworkManager, no issues whatsoever.  No need for kill
switch or any such fiddling.

--andrew

-- 
GnuPG Key ID: ECB18ABA
Fingerprint:  FDF3 91FC F5BC 1164 E217  315E 337E 219B ECB1 8ABA

-- 
CPU soft lockup during bootup
https://launchpad.net/bugs/63418

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 63418] Re: CPU soft lockup during bootup

[Andrew Henry]

-- 
CPU soft lockup during bootup
https://launchpad.net/bugs/63418

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 63418] Re: CPU soft lockup during bootup

[Andrew Henry]

Duncan Lithgow wrote:
> Andrew, there's not much point filing a bug if you're not going to run
> 6.10 - how can you test solutions? Can you maybe install 6.10 to another
> partition so you can keep seeing what the problem is? For example, one
> installed you could use a live CD to put the new ipw3945 driver in and
> see if that helps.
>
>   
I didn't file this bug and I do not have an ipw3945, I just wanted to
add to the bug that I have bcm43xx and get the same problem, so it might
not be specific to the ipw3945 driver.

If anyone has a good solution to try then of course I will install Edgy
again as it goes quite quickly with having /home on a separate
partition, but I have one laptop used by my spouse and myself and cannot
afford to have a broken edgy installation for several weeks waiting for
suggestions to pop-up.

-- 
CPU soft lockup during bootup
https://launchpad.net/bugs/63418

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 63418] Re: CPU soft lockup during bootup

[Andrew Henry]

first attempt at replying failed...second time lucky...

I'm getting (or was getting as I downgraded to Dapper again) "BUG: soft
lockup detected on CPU#0!".  Many times I would also get an error about
kernel panic...in fact I got kernel panics more often than soft lockups,
but I cannot remember the whole error message with the kernel panic.

When I boot-up with nosplash, I immediately get 4 error/warning
messages, which I get even with Dapper:

"PCI: Cannot allocate resource region 7 of the bridge :00:06.0"

...or region 8, and then most of the time, I would get the soft lockup
message (only in Edgy).  In Dapper, these 4 initial errors do not seem
to affect the rest of the boot process and I have never had any issues
running Dapper.  Sometimes (very rarely), I could boot all the way into
X after the upgrade to Edgy, but as soon as I started typing my login
name, it would freeze and I would need to reboot.  Once, after I did a
clean install of Edgy, I could get into the GUI, but it would freeze at
random points after a short while.

As I am upgrading, acer_acpi, the module that turns on my wireless, does
not work in the new kernel, so I need to compile and install it again,
but because the lockups happen so quickly, even when booting in safe
mode, I do not get chance to do any of this.

If I upgrade again to Edgy, is it possible to keep 2.6.15-27-amd64-k8
kernel by removing the commented out section in grubs menu.lst, and boot
using that with Edgy?  If that is possible then I could at least have
Edgy until the kernel is fixed.  Another workaround I thought about was
to upgrade to a 'knot' release of Edgy with an earlier kernel than
2.6.17-10 where the bug is not present, ans then continue to upgrade
everything apart from the kernel until this is solved.

--andrew

-- 
CPU soft lockup during bootup
https://launchpad.net/bugs/63418

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 63418] Re: CPU soft lockup during bootup

[Andrew Henry]

-- 
CPU soft lockup during bootup
https://launchpad.net/bugs/63418

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 63418] Re: CPU soft lockup during bootup

[Andrew Henry]

I just want to add that I get this bug with completely different
hardware.  I have an Acer Aspire 5021WLMi with a Broadcom BCM4318 rev 02
chipset that cannot be enabled through hardware/BIOS.  I use the
acer_acpi module to turn on the adapter through software and I call it
in /etc/modules, but enable it using a custom pre-up script in
/etc/networking.  So, as I get crashes way before this point, I cannot
boot 100% of the time.  Dapper works perfectly, but upgrading to Edgy
gave this bug, and a clean install of Edgy didn't help either.

--andrew

-- 
CPU soft lockup during bootup
https://launchpad.net/bugs/63418

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs