[Bug 643175] Re: During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information
Hi, When I see the "Activate Serial ATA RAID devices" prompt on the alternate CD, and say "No", I am able to see the partition and configure the drives as expected. However, when I answer "Yes", it can't see the partition. (To make sure this was still an accurate test, I downloaded the alternate CD x86 RC just now and retested using it.) Thanks, Bryan -- During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information detected https://bugs.launchpad.net/bugs/643175 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643175] Re: During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information
** Attachment added: "booting with nodmraid" https://bugs.launchpad.net/ubuntu/+bug/643175/+attachment/1667082/+files/syslog -- During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information detected https://bugs.launchpad.net/bugs/643175 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643175] Re: During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information
Hi Fabio, Yes, my drive is configured as RAID-0, and attached to a "Silicon Image SiI 3132 SATALink Controller". (The motherboard also has RAID and IDE support, but it is disabled since I have a RAID controller card.) I booted with the nodmraid option as you suggested, and got the same result... no drives in the installer's partition manager. Attached please find the syslog from that boot. Thanks for your assistance. --Bryan P.S. I'm pretty sure this used to work fine in 7.x or 8.x, and since gparted sees the drives fine, I suspect this is a bug in the partition manager. -- During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information detected https://bugs.launchpad.net/bugs/643175 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643175] Re: During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information
Hi Fabio, You're welcome! Thank you for your help! :) Attached please find the syslog requested. Cheers, Bryan -- During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information detected https://bugs.launchpad.net/bugs/643175 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643175] Re: During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information
** Attachment added: "Attached please find the syslog requested." https://bugs.launchpad.net/ubuntu/+bug/643175/+attachment/1665199/+files/syslog -- During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information detected https://bugs.launchpad.net/bugs/643175 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643175] Re: During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information
Hi Fabio, I tested this with the x86 desktop RC from today as you requested, and the problem still happens. Thanks for your assistance, Bryan -- During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information detected https://bugs.launchpad.net/bugs/643175 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643175] Re: During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information
Attached please find the device information for my PC. (Generated with the "System Testing" application under System | Administration) ** Attachment added: "DeviceInformation.tar.gz" https://bugs.launchpad.net/ubuntu/+bug/643175/+attachment/1651677/+files/DeviceInformation.tar.gz -- During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information detected https://bugs.launchpad.net/bugs/643175 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643175] Re: During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information
ok, to be proactive with this, I went ahead and grabbed the latest daily build I could find for today (http://cdimage.ubuntu.com/daily- live/20100928/maverick-desktop-i386.iso), and reproduced the problem again. This time, I captured a two minute video showing the bug in the installer partioner GUI, and then showing how gparted sees the drives just fine once the live CD boots. (Please see video, attached.) -- During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information detected https://bugs.launchpad.net/bugs/643175 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643175] Re: During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information
** Attachment added: "GUI Partitioner Bug on Ubuntu Maverick Daily Build 28-09-2010.wmv" https://bugs.launchpad.net/ubuntu/+bug/643175/+attachment/1651642/+files/GUI%20Partitioner%20Bug%20on%20Ubuntu%20Maverick%20Daily%20Build%2028-09-2010.wmv -- During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information detected https://bugs.launchpad.net/bugs/643175 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643175] Re: During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information
Hi Fabio, Sure! Did someone make a code change in the GUI installer's partioner? If not, I can try to test the latest daily build so there will be more time to address before release. Thanks, Bryan -- During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information detected https://bugs.launchpad.net/bugs/643175 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643175] Re: During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information
Hi Fabio, Thank you for your email. Here is the information you requested: br...@bryan-pc:~$ cd /home/bryan/Downloads/ br...@bryan-pc:~/Downloads$ md5sum ubuntu-10.10-beta-desktop-i386.iso e3b0a39b0069b2b3e8f179e18a619585 ubuntu-10.10-beta-desktop-i386.iso br...@bryan-pc:~/Downloads$ ls -l ubuntu-10.10-beta-desktop-i386.iso -rw-r--r-- 1 bryan bryan 727463936 2010-09-19 20:09 ubuntu-10.10-beta-desktop-i386.iso br...@bryan-pc:~/Downloads$ dd if=/dev/cdrom bs=2048 count=355207 | md5sum e3b0a39b0069b2b3e8f179e18a619585 - 355207+0 records in 355207+0 records out 727463936 bytes (727 MB) copied, 96.8582 s, 7.5 MB/s The MD5SUMs matched the published one for the 10.10 beta: http://ubuntu.trumpetti.atm.tut.fi/releases/10.10/MD5SUMS ** Changed in: ubuntu Status: Incomplete => New ** Description changed: - Binary package hint: upower - 1) You are using Ubuntu 10.10 - - the Maverick Meerkat - released in October 2010 and supported until April 2012. - + - the Maverick Meerkat - released in October 2010 and supported until April 2012. 2) i386 Desktop Installer 3) When I selected Install, and got to the Allocate Drive Space dialog, I expected to see my drives 4) Instead, my drives were not seen by the "Allocate Drive Space" dialog. However, when I quit and booted to the live CD, my drives were seen. 5) Workaround: Install from the alternate CD, and when I get to the question about RAID information detected... should we load it? I answered "No", and I was able to see my drives. -- During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information detected https://bugs.launchpad.net/bugs/643175 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 614119] Re: upowerd crashed with SIGSEGV in dbus_connection_send()
I tested this using the x86 Desktop iso build from 25/09/2010, and the problem seems to be fixed in that build. Thanks! -- upowerd crashed with SIGSEGV in dbus_connection_send() https://bugs.launchpad.net/bugs/614119 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 614119] Re: upowerd crashed with SIGSEGV in dbus_connection_send()
I'd be glad to test this on my PC if there is a prerelease ISO that includes this change. -- upowerd crashed with SIGSEGV in dbus_connection_send() https://bugs.launchpad.net/bugs/614119 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643176] Re: Strange characters appear in menu when I click Help | About in Ubuntu 10.10 i386 Beta Live CD menu
** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/643176/+attachment/1611120/+files/Dependencies.txt ** Attachment added: "ProcMaps.txt" https://bugs.launchpad.net/bugs/643176/+attachment/1611121/+files/ProcMaps.txt ** Attachment added: "ProcStatus.txt" https://bugs.launchpad.net/bugs/643176/+attachment/1611122/+files/ProcStatus.txt ** Attachment added: "XsessionErrors.txt" https://bugs.launchpad.net/bugs/643176/+attachment/1611123/+files/XsessionErrors.txt -- Strange characters appear in menu when I click Help | About in Ubuntu 10.10 i386 Beta Live CD menu https://bugs.launchpad.net/bugs/643176 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643176] [NEW] Strange characters appear in menu when I click Help | About in Ubuntu 10.10 i386 Beta Live CD menu
Public bug reported: Binary package hint: yelp When I boot to the live CD for the 10.10 i386 Desktop beta, and I click Help | About, I see strange characters instead of letters where the menu should be. They look like boxes with numbers in them. I tried to get a screenshot, but that screenshot app crashed. I'm filing a separate report on that. ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: yelp 2.30.1-0ubuntu1 ProcVersionSignature: Ubuntu 2.6.35-19.28-generic 2.6.35.3 Uname: Linux 2.6.35-19-generic i686 Architecture: i386 Date: Mon Sep 20 01:44:03 2010 ExecutablePath: /usr/bin/yelp LiveMediaBuild: Ubuntu 10.10 "Maverick Meerkat" - Beta i386 (20100901.1) ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: yelp ** Affects: yelp (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 maverick -- Strange characters appear in menu when I click Help | About in Ubuntu 10.10 i386 Beta Live CD menu https://bugs.launchpad.net/bugs/643176 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643175] [NEW] During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID informatio
Public bug reported: Binary package hint: upower 1) You are using Ubuntu 10.10 - the Maverick Meerkat - released in October 2010 and supported until April 2012. 2) i386 Desktop Installer 3) When I selected Install, and got to the Allocate Drive Space dialog, I expected to see my drives 4) Instead, my drives were not seen by the "Allocate Drive Space" dialog. However, when I quit and booted to the live CD, my drives were seen. 5) Workaround: Install from the alternate CD, and when I get to the question about RAID information detected... should we load it? I answered "No", and I was able to see my drives. ** Affects: ubuntu Importance: Undecided Status: New ** Package changed: upower (Ubuntu) => ubuntu -- During Install my drives were not seen on the "Allocate Drive Space" dialog; however, they are seen when I run the alternate CD and answer "No" to the question about RAID information detected https://bugs.launchpad.net/bugs/643175 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 631285] Re: package moodle (not installed) failed to cancel installation: subprocess installed post-installation script returned error exit status 1
** Attachment added: "AptOrdering.txt" https://bugs.launchpad.net/bugs/631285/+attachment/1548567/+files/AptOrdering.txt ** Attachment added: "Df.txt" https://bugs.launchpad.net/bugs/631285/+attachment/1548568/+files/Df.txt ** Attachment added: "Dmesg.txt" https://bugs.launchpad.net/bugs/631285/+attachment/1548569/+files/Dmesg.txt ** Attachment added: "DpkgTerminalLog.gz" https://bugs.launchpad.net/bugs/631285/+attachment/1548570/+files/DpkgTerminalLog.gz ** Description changed: Binary package hint: moodle I was installing Moodle (along with some other software I wanted to - check out), and came upon the postgres dialog. Because I did not want - to install a database at this time, I attempted to cancel the install by + check out), and came upon the postgre dialog. Because I did not want to + install a database at this time, I attempted to cancel the install by clicking back. Instead of asking if I wanted to cancel the install, it tried to proceed after displaying the dialog several times. I let the install complete, with the intention of uninstalling it afterwards to clean up the failed installation. During the uninstall, I was prompted - for my postgres credentials again (even though I was uninstalling). + for my postgre credentials again (even though I was uninstalling). I think I finally got it uninstalled. ProblemType: Package DistroRelease: Ubuntu 10.04 Package: moodle (not installed) ProcVersionSignature: Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5 Uname: Linux 2.6.32-24-generic i686 Architecture: i386 Date: Sun Sep 5 22:57:25 2010 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationMedia: Ubuntu 10.04.1 LTS "Lucid Lynx" - Release i386 (20100816.1) SourcePackage: moodle Title: package moodle (not installed) failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- package moodle (not installed) failed to cancel installation: subprocess installed post-installation script returned error exit status 1 https://bugs.launchpad.net/bugs/631285 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 631285] [NEW] package moodle (not installed) failed to cancel installation: subprocess installed post-installation script returned error exit status 1
Public bug reported: Binary package hint: moodle I was installing Moodle (along with some other software I wanted to check out), and came upon the postgre dialog. Because I did not want to install a database at this time, I attempted to cancel the install by clicking back. Instead of asking if I wanted to cancel the install, it tried to proceed after displaying the dialog several times. I let the install complete, with the intention of uninstalling it afterwards to clean up the failed installation. During the uninstall, I was prompted for my postgre credentials again (even though I was uninstalling). I think I finally got it uninstalled. ProblemType: Package DistroRelease: Ubuntu 10.04 Package: moodle (not installed) ProcVersionSignature: Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5 Uname: Linux 2.6.32-24-generic i686 Architecture: i386 Date: Sun Sep 5 22:57:25 2010 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationMedia: Ubuntu 10.04.1 LTS "Lucid Lynx" - Release i386 (20100816.1) SourcePackage: moodle Title: package moodle (not installed) failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 ** Affects: moodle (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 lucid -- package moodle (not installed) failed to cancel installation: subprocess installed post-installation script returned error exit status 1 https://bugs.launchpad.net/bugs/631285 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
