[Bug 219541] [NEW] iwl4965: does not react to kill switch
Public bug reported: Binary package hint: linux-ubuntu-modules-2.6.24-16-generic I'm the proud and lazy owner of an Acer 9920 laptop which has an iwl4965 wireless chipset. The Acer appearently always boots with the kill switch "on", i.e. I need to toggle it first after a boot before WIFI would work. And if I use the stock modules which have version 1.2.0 of the iwl4965 driver toggling this switch will work properly: Network Manager will pickup the change and I'll get connected properly. That version of the driver however stops working after a while due to bug 200509, so I took the advice there and used the newer module package which has version 1.2.25 of the iwl4965 driver. This driver version however is not able to pick up the killswitch change. When the laptop boots the log states that the kill switch is enabled (which it is), but toggling it on the keyboard does not switch networking on. The only way to do that is to toggle the switch once after boot, followed by a rmmod and modprobe of the iwl4965 driver. And being lazy this is of course a problem ;-) The BIOS does not have an option to enable WIFI by default, so every boot I have to sudo and do the modprobe dance. I will attach a dmesg log for the boot. This occurs on Hardy, up-to-date till today. ** Affects: linux-ubuntu-modules-2.6.24 (Ubuntu) Importance: Undecided Status: New -- iwl4965: does not react to kill switch https://bugs.launchpad.net/bugs/219541 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 219541] Re: iwl4965: does not react to kill switch
** Attachment added: "dmesg for boot" http://launchpadlibrarian.net/13576390/t.txt -- iwl4965: does not react to kill switch https://bugs.launchpad.net/bugs/219541 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281519] Re: display corruption with nvidia driver
Ok; I tested a few days with the older drivers and they work properly. There was one issue where the middle of the screen within Opera did not update properly but we'll assume that to be a fluke... The odd thing is that I distinctly remember that when I ran Ubuntu 8.04 I updated to the beta drivers (177) directly from the nvidia site and they worked properly... Ah well. -- display corruption with nvidia driver https://bugs.launchpad.net/bugs/281519 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 278008] Re: iwlagn wifi never comes up after RF kill is disabled
I have an Acer 9920 with an 4965 chipset. This machine has a kill switch which is a toggle and it defaults to ON (killed) always. I have the same problem: after booting the killswitch is always ON. Toggling it in 8.04 would enable the wireless properly. In 8.10 nothing happens. No state change is visible *at all* in dmesg. Unloading and reloading iwlagn causes wireless to become active. -- iwlagn wifi never comes up after RF kill is disabled https://bugs.launchpad.net/bugs/278008 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 269264] Re: rfkill switch on Intel 4965AGN wireless does not work in intrepid
Same problem here, on an Acer Aspire 9920. This always boots with the kill switch ON (killed); the only way to get a connection is to first toggle the switch and then removing and adding the iwlagn module. This worked properly on Hardy. What has changed is that with Hardy I got messages about "scan code xxx" in the dmesg log when I toggled the kill switch. In Intrepid nothing is visible when I toggle the switch. -- rfkill switch on Intel 4965AGN wireless does not work in intrepid https://bugs.launchpad.net/bugs/269264 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281519] [NEW] display corruption with nvidia driver
Public bug reported: Binary package hint: nvidia-glx-177 After installing intrepid beta with the nvidia 177 driver my screen contents is often corrupted. Resolution etc is OK but the following happens all the time: - when editing text (for instance in the console) the text cursor is not properly erased causing multiple cursor images (black blobs or underlines) to remain visible. The same happens now in this textarea 8-( - lots of vertical bars at the left of the input area. - When switching tabs for instance in Opera not all of the tab contents is redrawn. This sometimes leaves content of the previous tab visible and sometimes the area is just white. If the area contains links or other active stuff it becomes visible (partly) when the mouse moves over it. This machine has worked properly from 7.10 on, and I *think* an update of this week (oct-6 to oct-10) has caused the problem; I am not sure however since I installed the beta on saturday oct-4th. I'll attach an Xorg.0.log. ** Affects: nvidia-graphics-drivers-177 (Ubuntu) Importance: Undecided Status: New -- display corruption with nvidia driver https://bugs.launchpad.net/bugs/281519 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281519] Re: display corruption with nvidia driver
** Attachment added: "xorg.log" http://launchpadlibrarian.net/18426799/Xorg.0.log -- display corruption with nvidia driver https://bugs.launchpad.net/bugs/281519 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 968308]
(In reply to Francesco D\'Amore from comment #84) > Unfortunatly there aren't JVM crash files available for logging. Well, I had that too; I managed to get proper jvm logfiles by using a start script instead of Eclipse's launcher. Create a file "start.sh" in your eclipse home with: #!/bin/bash ulimit -c unlimited /opt/java/jdk1.7.0_25/bin/java -XX:MaxPermSize=512m -Xmx2048m -Dorg.eclipse.swt.browser.XULRunnerPath=/dev/null -Dorg.eclipse.swt.browser.DefaultType=mozilla -jar plugins/org.eclipse.equinox.launcher_*.jar -console Mark it executable (chmod a+x start.sh) and use it to start Eclipse. This at least produces the jvm logs again. In addition, for me Eclipse on Ubuntu 13.04 has been *rock solid*, both 4.2 and 4.3, no crashes *at all* with daily use for many hours a day (yes, lack of real life ;-) by doing the following: * Disable browser support by adding the -Dorg.eclipse.swt.browser.XULRunnerPath=/dev/null -Dorg.eclipse.swt.browser.DefaultType=mozilla parameters to eclipse.ini * Apply the workaround for bug# 416869: sudo apt-get remove overlay-scrollbar With those things no crashes. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/968308 Title: Opening Eclipse workbench causes SIGSEGV To manage notifications about this bug go to: https://bugs.launchpad.net/eclipse/+bug/968308/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 968308]
It does not abort that often on 3.8.2. But 4.3, currently m7, does it an awful lot. The problem remains that there is no certain way to reproduce: sometimes I need to start 4.3m7 several times quickly in succession because as soon as the main window appears and I move the mouse over source code (which would probably show the hover containing source information) Eclipse aborts. But there are also times that I can work for 3 hours without any problem. I don't know if it's possible, but the huge problem now is that I can hardly use 4.3m7 at all. Would it be possible to somehow "guard" against this exception somewhere in the source code, so that instead of completely dying the process continues? In the meantime, if there is anything I can help with to get more details on this let me know... -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/968308 Title: Opening Eclipse workbench causes SIGSEGV To manage notifications about this bug go to: https://bugs.launchpad.net/eclipse/+bug/968308/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1266004]
Just FYI: the problem is still present in Eclipse Luna 4.4m6, but now in webkit 3.0. The problem I got after 15 seconds of use was: # SIGSEGV (0xb) at pc=0x7ff32d652345, pid=17155, tid=140685029988096 # # JRE version: Java(TM) SE Runtime Environment (7.0_45-b18) (build 1.7.0_45-b18) # Java VM: Java HotSpot(TM) 64-Bit Server VM (24.45-b08 mixed mode linux-amd64 compressed oops) # Problematic frame: # C [libwebkitgtk-3.0.so.0+0x407345] webkitWebViewRegisterForIconNotification+0x95 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1266004 Title: Eclipse crash To manage notifications about this bug go to: https://bugs.launchpad.net/eclipse/+bug/1266004/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 968308]
Just FYI: the problem is still present in Eclipse Luna 4.4m6, but now in webkit 3.0. The problem I got after 15 seconds of use was: # SIGSEGV (0xb) at pc=0x7ff32d652345, pid=17155, tid=140685029988096 # # JRE version: Java(TM) SE Runtime Environment (7.0_45-b18) (build 1.7.0_45-b18) # Java VM: Java HotSpot(TM) 64-Bit Server VM (24.45-b08 mixed mode linux-amd64 compressed oops) # Problematic frame: # C [libwebkitgtk-3.0.so.0+0x407345] webkitWebViewRegisterForIconNotification+0x95 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/968308 Title: Opening Eclipse workbench causes SIGSEGV To manage notifications about this bug go to: https://bugs.launchpad.net/eclipse/+bug/968308/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 968308]
(In reply to comment #16) > (In reply to comment #14) > Regarding GTK3, you can run your Eclipse download (as of Eclipse 4.3) with > GTK3 libraries instead of GTK2 Heh, that dies immediately with: # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x7ff2be8a8d98, pid=32672, tid=140683416110848 # # JRE version: 7.0_21-b02 # Java VM: OpenJDK 64-Bit Server VM (23.7-b01 mixed mode linux-amd64 compressed oops) # Problematic frame: # C [libwebkitgtk-3.0.so.0+0x3fcd98] DumpRenderTreeSupportGtk::setComposition(_WebKitWebView*, char const*, int, int)+0x8d28 I am surprised I seem to be one of the few people having this.. Since it's close to 4.3 release I sure hope I'm the exception.. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/968308 Title: Opening Eclipse workbench causes SIGSEGV To manage notifications about this bug go to: https://bugs.launchpad.net/eclipse/+bug/968308/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 968308]
(In reply to comment #14) > Replace libwebkitgtk-1 with libwebkitgtk-3 Thanks a million for posting this! I removed the libwebkitgtk-1.0* files to test. Eclipse starts normally and hovers work, but they do not seem to use a browser window anymore: they look like text input boxes with only rudimentary formatting of the html javadoc. Looking at what libraries are open (lsof -p) I see that webkitgtk-3* is not used at all - so clearly eclipse is not automatically picking up libwebkitgtk-3 but just not using libwebkitgtk at all. Which is so far fine by me - not dying has priority ;-) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/968308 Title: Opening Eclipse workbench causes SIGSEGV To manage notifications about this bug go to: https://bugs.launchpad.net/eclipse/+bug/968308/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1107023] Re: dconf-service crashed with SIGSEGV in g_variant_builder_add_value() on boot from usb stick. can not install ubuntu
Occurred when trying to install raring 2013-01-31 daily build from USB. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1107023 Title: dconf-service crashed with SIGSEGV in g_variant_builder_add_value() on boot from usb stick. can not install ubuntu To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/d-conf/+bug/1107023/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 953900] Re: bzr crashed with error in _ensure_content(): Error -3 while decompressing data: incorrect data check
** Visibility changed to: Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/953900 Title: bzr crashed with error in _ensure_content(): Error -3 while decompressing data: incorrect data check To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bzr/+bug/953900/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1777364] Re: coping files to cifs mounted directory causes general protection fault
Could be related to something in here: https://bugs.archlinux.org/task/57474 Adding vers=1.0 in the mount line seems to fix the issue. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1777364 Title: coping files to cifs mounted directory causes general protection fault To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1777364/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1663839] Re: gnome-session-binary[1676]: Unrecoverable failure in required component org.gnome.SettingsDaemon.Color.desktop
18.04 has this quite often too, most of the times about 1 to 2 minutes after the first login. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1663839 Title: gnome-session-binary[1676]: Unrecoverable failure in required component org.gnome.SettingsDaemon.Color.desktop To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-session/+bug/1663839/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1654708] Re: Trying to reinstall ZFS on Xenial. Cannot mount existing zpool with identifier from /mnt/disk/by-id/xxxx
Thanks a lot, Michael T; Your solution in #6 worked like a charm! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1654708 Title: Trying to reinstall ZFS on Xenial. Cannot mount existing zpool with identifier from /mnt/disk/by-id/ To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1654708/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1658921] Re: NetworkManager does not manage wired connection
Got the same issue upgrading from 16.04 to 16.10 and again from 16.10 to 17.04. Deleting the file worked. Sad that this is not fixed. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1658921 Title: NetworkManager does not manage wired connection To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1658921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 599330] Re: Oracle I/O performance in Lucid appaling
Seems to be caused by write barriers on ext4. barrier=0 on mount makes iotop data show faster IO than ext3 - around 20M/s average. -- Oracle I/O performance in Lucid appaling https://bugs.launchpad.net/bugs/599330 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 671795] Re: bzr crashed with NoSuchRevision in _do_revision_id_to_dotted_revno()
** Visibility changed to: Public -- bzr crashed with NoSuchRevision in _do_revision_id_to_dotted_revno() https://bugs.launchpad.net/bugs/671795 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 599330] [NEW] Oracle I/O performance in Lucid appaling
Public bug reported: I installed Oracle 10g R2 32-bit on Ubuntu 10.04 32-bit. I know Oracle is not supported on Ubuntu, so you decide what you want to do with this bug report ;-) After installation I can start Oracle and its listener just fine. But I/O performance is appaling: I am doing an import of a big database and it takes forever. When I look with iotop I see a total disk write speed of 950K/s top and often less. The db writer process often has only 400K/s, the logwriter around 140K/s. The file system is ext4; I will try again later on an ext3 drive to see if that makes a difference. Normally IO on this system is not slow; for instance gzip -d for that same dump on that same drive reports 70M/s usually. The machine is a Core I7 920 running 2.6.32-23-generic-pae #37-Ubuntu SMP Fri Jun 11 09:26:55 UTC 2010 i686 GNU/Linux ** Affects: ubuntu Importance: Undecided Status: New -- Oracle I/O performance in Lucid appaling https://bugs.launchpad.net/bugs/599330 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 599330] Re: Oracle I/O performance in Lucid appaling
Meh. Disk performance with ext3 is better (averages 13 to 14M/s) but still very, very slow. -- Oracle I/O performance in Lucid appaling https://bugs.launchpad.net/bugs/599330 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 532633] Re: [Master] Window Control buttons: position/order/alignment
Irritating your users with such a silly and currently /completely useless/ change is not innovation- it is dumb. Not listening to your users is not very bright either. Provide something useful together with such a change, not long after. By itself this is not a big problem - thank god we have a way to revert this sillyness. It's just beyond pathetic that we have to do so under the guise of "innovation". -- [Master] Window Control buttons: position/order/alignment https://bugs.launchpad.net/bugs/532633 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 590963] Re: Boot hangs 3 times in 4, ureadahead out of memory
After the latest ureadahead update I cannot boot at all anymore- boot hangs 100% of the time. Disabling the ureadahead deamon using a boot CD was the only solution. -- Boot hangs 3 times in 4, ureadahead out of memory https://bugs.launchpad.net/bugs/590963 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 579889] [NEW] nvidia-current failed compile without reporting error
Public bug reported: Binary package hint: nvidia-current In Lucid 10.04: I have a 4GB machine but the installation process installed a non-PAE kernel, causing only 3GB to be available. I manually installed the PAE generic kernel package (BUT FORGOT TO INSTALL THE HEADERS PACKAGE FOR IT) and rebooted, then I installed nvidia-current. Installation did not report an error but X would not start after reboot. The cause was that the kernel driver compile failed because the headers were missing. I think nvidia-current should pull those in, and should report an installation failure if they are missing. ** Affects: nvidia-graphics-drivers (Ubuntu) Importance: Undecided Status: New -- nvidia-current failed compile without reporting error https://bugs.launchpad.net/bugs/579889 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 491943] Re: Kernel trace buffer should be set to less unrealistic value
Same here: on every machine I have, all having 4GB or more memory available. It always kills plymouthd process when called. -- Kernel trace buffer should be set to less unrealistic value https://bugs.launchpad.net/bugs/491943 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 501037] [NEW] gnome create launcher on dual-head creates it on wrong desktop
Public bug reported: I have an NVidia dual-head setup with a freshly installed and updated Karmic AMD64 on it. When I try to create a launcher in Gnome using the right button menu on the secondary desktop this launcher gets created on the primary desktop. In addition it is not possible to copy/paste or move the created launcher back to the secondary desktop.. ** Affects: ubuntu Importance: Undecided Status: New -- gnome create launcher on dual-head creates it on wrong desktop https://bugs.launchpad.net/bugs/501037 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281519] Re: display corruption with nvidia driver
** Attachment added: "lspci -vvnn from my Acer 9920" http://launchpadlibrarian.net/21247413/lspci.txt -- display corruption with nvidia driver https://bugs.launchpad.net/bugs/281519 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1678477] Re: Kernel has troule recognizing Corsair Strafe RGB keyboard
Thanks @Kai-Heng Feng for your help. I have installed your kernel and it does seem to work. The boot does not delay for 30 or more seconds anymore, and the keyboard is usable immediately after boot. It still nags a bit: [2.249880] usb 3-1: New USB device found, idVendor=1b1c, idProduct=1b20 [2.249881] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [2.249882] usb 3-1: Product: Corsair STRAFE RGB Gaming Keyboard [2.249882] usb 3-1: Manufacturer: Corsair [2.249883] usb 3-1: SerialNumber: 1303D038AEA7A44454E1B806F5001944 [2.252101] hidraw: raw HID events driver (C) Jiri Kosina [2.254100] usbhid 3-1:1.2: couldn't find an input interrupt endpoint but so far it seems to work well. I will watch it for a while and report back if there is still trouble. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1678477 Title: Kernel has troule recognizing Corsair Strafe RGB keyboard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678477/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs