[Bug 495696] Re: blueman fails to release rfcomm0 when "disconnect device" is used with SP or DUN profile connections
Same problem in Ubuntu 13.10, blueman 1.23 when connecting to a GPS sharing app on my phone over rfcomm. If the connection is lost at some point then I have to restart bluetoothd before I can connect again. I've tried using `rfcomm release rfcomm0` which deletes the serial device in /dev/ but the blueman UI still thinks something is in use. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/495696 Title: blueman fails to release rfcomm0 when "disconnect device" is used with SP or DUN profile connections To manage notifications about this bug go to: https://bugs.launchpad.net/blueman/+bug/495696/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1251509] [NEW] Recite relies on /dev/dsp even when writing to file
Public bug reported: /dev/dsp is no longer with us, but recite can't even write to a file without it. $ recite input output recite: could not open "/dev/dsp": No such file or directory ** Affects: recite (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1251509 Title: Recite relies on /dev/dsp even when writing to file To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/recite/+bug/1251509/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 985121] Re: Ginn doesn't subscribe to gestures
Same issue on Dell XPS L501X with "SynPS/2 Synaptics TouchPad", except I don't get any 4-finger gestures (my touchpad may not support that?) Could this have something to do with the problem?: $ sudo mtview /dev/input/event8 error: could not grab the device -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/985121 Title: Ginn doesn't subscribe to gestures To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ginn/+bug/985121/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 975469] [NEW] /usr/lib/jvm/java-6-openjdk is an empty dir after upgrade to precise
Public bug reported: After the upgrade, this dir is empty when it should be a symlink to java-6-openjdk-amd64. This causes jvisualvm to fail to start as it can't find a jdkhome. The problem can be fixed by removing the directory: sudo rm -R /usr/lib/jvm/java-6-openjdk Then reinstalling the offending package: apt-get install --reinstall default-jre-headless ** Affects: java-common (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/975469 Title: /usr/lib/jvm/java-6-openjdk is an empty dir after upgrade to precise To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/java-common/+bug/975469/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 970475] Re: eclipse doesn't start !MESSAGE Missing imported package com.ibm.icu.text_0.0.0.
The workaround in #2 causes failures in plugins later on. I'm unable to install the Android SDK unless I do it as root, then when I run again as my normal user the plugins are in an errored state because one of them has a dependency on com.ibm.icu (Plug-in "com.ibm.icu" version "4.4.2.v20110208" referenced by this feature is missing.) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/970475 Title: eclipse doesn't start !MESSAGE Missing imported package com.ibm.icu.text_0.0.0. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/eclipse/+bug/970475/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 967924] Re: rhythmbox DAAP plugin causes crash when saving settings
Just removed rhythmbox, removed dobey's ppa and installed rhythmbox from standard 12.04 repositories. Confirmed this is fixed as of today's updates. I guess I don't have access to mark this as resolved though. Can someone do that? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/967924 Title: rhythmbox DAAP plugin causes crash when saving settings To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/967924/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 967924] Re: rhythmbox DAAP plugin causes crash when saving settings
I just did an apt-get update; apt-get upgrade and I can no longer reproduce the problem either. Looking good! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/967924 Title: rhythmbox DAAP plugin causes crash when saving settings To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/967924/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 940749] Re: Segfault in _elementtidy.so when parsing trivial HTML.
** Attachment added: "Contains an example XHTML file and a test script" https://bugs.launchpad.net/bugs/940749/+attachment/2781056/+files/ElementTidy%20crash.zip -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/940749 Title: Segfault in _elementtidy.so when parsing trivial HTML. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/elementtidy/+bug/940749/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 940749] [NEW] Segfault in _elementtidy.so when parsing trivial HTML.
Public bug reported: Some files cause elementtidy so crash the Python interpreter. This has been tested on 2 different 64-bit machines running Ubuntu 11.10 (mine and the attached test was also run by dtmbmw325i in #ubuntu on freenode). I have attached a minimal example file and script which demonstrates the problem. In an effort to debug this I downloaded the sources, patched, recompiled and installed... The problem then went away! I guess that this would suggest an old problem in a version of gcc from February 2005; suggest recompiling and repackaging to fix. ** Affects: elementtidy (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/940749 Title: Segfault in _elementtidy.so when parsing trivial HTML. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/elementtidy/+bug/940749/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 742544] Re: Launcher is shown on the wrong screen in some multi-monitor setups
Here's a screenshot I attached to the wrong bug: https://bugs.launchpad.net/unity-2d/+bug/757652/+attachment/2090480/+files/Unity%203D%20-%203%20monitor%20setup%20with%20output%200%20as%20leftmost%20display.png It's badly named, should say rightmost display. I worked around it by switching my monitor outputs, which sucks as a general solution but worked in my case -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/742544 Title: Launcher is shown on the wrong screen in some multi-monitor setups -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 757652] Re: [panel] The main panel is not on the leftmost monitor in a dual-head setup
This applies to Unity 3D on my triple head setup. As you can see in the attached image, Catalyst Control Center shows that the first output is the leftmost display and second is the rightmost. ** Attachment added: "3 monitors, panel and menu on rightmost monitor" https://bugs.launchpad.net/ubuntu/+source/unity/+bug/757652/+attachment/2090480/+files/Unity%203D%20-%203%20monitor%20setup%20with%20output%200%20as%20leftmost%20display.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/757652 Title: [panel] The main panel is not on the leftmost monitor in a dual-head setup -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 767823] Re: Overlay scrollbar hidden underneath bottom panel in Ubuntu Classic mode
This also applies to vertical scrollbars when you have a panel on the right hand side of the screen. Maybe a quick fix would be to temporarily disable overlay-scrollbar when in gdm -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/767823 Title: Overlay scrollbar hidden underneath bottom panel in Ubuntu Classic mode -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 685682] Re: [fglrx] compiz crashed with SIGSEGV in nux::IOpenGLSurface::UnlockRect()
I recorded this video to see if anyone in #ubuntu+1 was having the same problem with ATI on Ubuntu 11.04 Beta 1. It doesn't add much to the bug report other than illustrating the black box thing that John, Tushar and Guilluame describe above. http://www.youtube.com/watch?v=rYz7k_CLksE -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/685682 Title: [fglrx] compiz crashed with SIGSEGV in nux::IOpenGLSurface::UnlockRect() -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 579822] Re: Large window size crashes compiz
I have this in issue in Ubuntu 10.10, Compiz 0.8, Gnome 2.32.0. I am using AMD's proprietary driver and have a 3 monitor desktop at 5760x1920. Resizing a GTK window larger than 3104 pixels wide causes my session to crash and I'm returned to the login screen. Chromium can be resized without problems but FireFox causes me to be logged out, as do all Gnome apps that I tried. I also tried KolorPaint, a KDE app, this also caused the problem. I've attached the image I used to find the maximum size, in case that's useful to someone. ** Attachment added: "Test image for 5760x1920 display (set to span)" https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/579822/+attachment/1825899/+files/test.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/579822 Title: Large window size crashes compiz -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 93847] Re: Excessive CPU usage by Gnome System Monitor
Disclaimer: I know nothing of GTK or Cairo. First up, the source: http://git.gnome.org/browse/gnome-system-monitor/tree/src/load-graph.cpp This comment: // FIXME: // on configure, g->frames_per_unit = g->draw_width/(LoadGraph::NUM_POINTS); // knock FRAMES down to 5 until cairo gets faster This value is set to 10, not 5. I haven't profiled it, but that comment would suggest cairo_curve_to is the problem. The canvas appears to be stateless, redrawing everything every frame. The obvious solution is to implement a cache for the graph rather than blaming Cairo for the speed. Cairo must have ways to manipulate graphics buffers. Keep two around as part of the load graph state, one for the background and one for the graph. Draw in a cyclic manor each frame like so: 1) Work out a width based on the last drawn position and the current one. Blank it out from left to right, wrap around if necessary. 2) Draw the line segments from the last drawn position to the current "cursor position" 3) Stamp down the graph background onto the canvas 4) Draw the line segments in two halves, giving the illusion of a scrolling buffer This will remove 99.9% of the smooth line drawing calls, it will cost a small memory cache, but that's the reason we have RAM anyway. Workarounds: a) Do as the comment says, set frames_per_unit to 10 instead of 5, this will draw less line segments. This will call g_timeout_add with a larger interval. b) Set the default /apps/procman/graph_update_interval to something higher, say 2000 or 5000. This would just suck. c) Draw jagged lines instead of smooth ones, this may be faster. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/93847 Title: Excessive CPU usage by Gnome System Monitor -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 572773] Re: Balazar crashes with Error: (GL_INVALID_OPERATION)
Also happens on 10.04 32-bit. Appears to be caused by the backlight dimming on my laptop ** Attachment added: "Screenshot" http://launchpadlibrarian.net/47981908/Screenshot-Balazar.png -- Balazar crashes with Error: (GL_INVALID_OPERATION) https://bugs.launchpad.net/bugs/572773 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 257713] Re: No thumbnail for .svgz file
I can't see thumbnails for svgz files either. Not sure if this is a regression or a different problem, because opening in EoG no longer fixes the thumbs. If I rename a svg file to svgz it does re-render the thumb, if I rename a svgz file to svg then it doesn't re-render it. librsvg appears to be built with --with-svgz, but I'm not sure. I am using Ubuntu 9.10 ** Attachment added: "Example .svgz file made in Inkscape" http://launchpadlibrarian.net/38334603/bitplane.svgz -- No thumbnail for .svgz file https://bugs.launchpad.net/bugs/257713 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 410590] [NEW] Brasero has no icon in High Contrast theme
Public bug reported: Binary package hint: brasero Brasero-common has no high contrast inverse icons. I've attached one for the main icon. ** Affects: brasero (Ubuntu) Importance: Undecided Status: New ** Tags: icon icons -- Brasero has no icon in High Contrast theme https://bugs.launchpad.net/bugs/410590 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 410590] Re: Brasero has no icon in High Contrast theme
** Attachment added: "brasero.svg" http://launchpadlibrarian.net/30044897/brasero.svg -- Brasero has no icon in High Contrast theme https://bugs.launchpad.net/bugs/410590 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs