[Bug 1864991] [NEW] Lost wifi after cold restart: Intel 9462
Public bug reported: yesterday my laptop went down due to empty battery. After the reboot there was no WLAN interface any more. dmesg says; # dmesg | grep iwl [ 10.064677] iwlwifi :00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 43.2.23.17 [ 10.064963] iwlwifi :00:14.3: loaded firmware version 48.4fa0041f.0 op_mode iwlmvm [ 10.147488] iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9462, REV=0x354 [ 11.158645] iwlwifi :00:14.3: Collecting data: trigger 15 fired. [ 11.158728] iwlwifi :00:14.3: Start IWL Error Log Dump: [ 11.158749] iwlwifi :00:14.3: Status: 0x, count: 112460234 [ 11.158754] iwlwifi :00:14.3: Loaded firmware version: 48.4fa0041f.0 [ 11.158758] iwlwifi :00:14.3: 0xE4CC9DFB | ADVANCED_SYSASSERT [ 11.158760] iwlwifi :00:14.3: 0xB9E373EB | trm_hw_status0 [ 11.158763] iwlwifi :00:14.3: 0x70F95E5D | trm_hw_status1 [ 11.158765] iwlwifi :00:14.3: 0xF89E9DD8 | branchlink2 [ 11.158767] iwlwifi :00:14.3: 0x8E824365 | interruptlink1 [ 11.158769] iwlwifi :00:14.3: 0xA11CEDC1 | interruptlink2 [ 11.158772] iwlwifi :00:14.3: 0xD453408A | data1 [ 11.158774] iwlwifi :00:14.3: 0x6104FDAA | data2 [ 11.158776] iwlwifi :00:14.3: 0x2FA57FCD | data3 [ 11.158778] iwlwifi :00:14.3: 0x223E6081 | beacon time [ 11.158782] iwlwifi :00:14.3: 0x9883002E | tsf low [ 11.158784] iwlwifi :00:14.3: 0xD775322C | tsf hi [ 11.158787] iwlwifi :00:14.3: 0xF3C7FB94 | time gp1 [ 11.158789] iwlwifi :00:14.3: 0x9CC87DD8 | time gp2 [ 11.158792] iwlwifi :00:14.3: 0x9BBC63F8 | uCode revision type [ 11.158795] iwlwifi :00:14.3: 0xD4E50FCC | uCode version major [ 11.158797] iwlwifi :00:14.3: 0x393D8F98 | uCode version minor [ 11.158800] iwlwifi :00:14.3: 0xA2515C24 | hw version [ 11.158802] iwlwifi :00:14.3: 0x95BFE5F2 | board version [ 11.158805] iwlwifi :00:14.3: 0x8F1D46AF | hcmd [ 11.158808] iwlwifi :00:14.3: 0xFE7C1EF0 | isr0 [ 11.158812] iwlwifi :00:14.3: 0x853A33B9 | isr1 [ 11.158818] iwlwifi :00:14.3: 0x090774CC | isr2 [ 11.158823] iwlwifi :00:14.3: 0xAF888EB5 | isr3 [ 11.158828] iwlwifi :00:14.3: 0x4CF5429A | isr4 [ 11.158834] iwlwifi :00:14.3: 0xE0071096 | last cmd Id [ 11.158839] iwlwifi :00:14.3: 0x0037C610 | wait_event [ 11.158842] iwlwifi :00:14.3: 0x99169B0C | l2p_control [ 11.158845] iwlwifi :00:14.3: 0xFFAB69F6 | l2p_duration [ 11.158849] iwlwifi :00:14.3: 0x85E21791 | l2p_mhvalid [ 11.158852] iwlwifi :00:14.3: 0x3E1A233B | l2p_addr_match [ 11.158856] iwlwifi :00:14.3: 0x742EA0CC | lmpm_pmg_sel [ 11.158859] iwlwifi :00:14.3: 0xF85BFA13 | timestamp [ 11.158862] iwlwifi :00:14.3: 0x337C67DF | flow_handler [ 11.158903] iwlwifi :00:14.3: Start IWL Error Log Dump: [ 11.158906] iwlwifi :00:14.3: Status: 0x, count: 7 [ 11.158910] iwlwifi :00:14.3: 0x201013F1 | ADVANCED_SYSASSERT [ 11.158913] iwlwifi :00:14.3: 0x | umac branchlink1 [ 11.158916] iwlwifi :00:14.3: 0xC008CF5C | umac branchlink2 [ 11.158918] iwlwifi :00:14.3: 0x | umac interruptlink1 [ 11.158922] iwlwifi :00:14.3: 0x | umac interruptlink2 [ 11.158925] iwlwifi :00:14.3: 0x0003 | umac data1 [ 11.158928] iwlwifi :00:14.3: 0x2302 | umac data2 [ 11.158931] iwlwifi :00:14.3: 0x0201 | umac data3 [ 11.158934] iwlwifi :00:14.3: 0x0030 | umac major [ 11.158937] iwlwifi :00:14.3: 0x4FA0041F | umac minor [ 11.158940] iwlwifi :00:14.3: 0x5CB7 | frame pointer [ 11.158944] iwlwifi :00:14.3: 0xC0887F58 | stack pointer [ 11.158947] iwlwifi :00:14.3: 0x | last host cmd [ 11.158950] iwlwifi :00:14.3: 0x | isr status reg [ 11.158968] iwlwifi :00:14.3: Fseq Registers: [ 11.158988] iwlwifi :00:14.3: 0x0003 | FSEQ_ERROR_CODE [ 11.159009] iwlwifi :00:14.3: 0x0026 | FSEQ_TOP_INIT_VERSION [ 11.159014] iwlwifi :00:14.3: 0x | FSEQ_CNVIO_INIT_VERSION [ 11.159034] iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION [ 11.159056] iwlwifi :00:14.3: 0x5C0C6AFC | FSEQ_TOP_CONTENT_VERSION [ 11.159077] iwlwifi :00:14.3: 0x4552414E | FSEQ_ALIVE_TOKEN [ 11.159082] iwlwifi :00:14.3: 0x2302 | FSEQ_CNVI_ID [ 11.159101] iwlwifi :00:14.3: 0x0201 | FSEQ_CNVR_ID [ 11.159122] iwlwifi :00:14.3: 0x2302 | CNVI_AUX_MISC_CHIP [ 11.159145] iwlwifi :00:14.3: 0x0201 | CNVR_AUX_MISC_CHIP [ 11.159171] iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM [ 11.159219] iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR [ 11.159275] iwlwifi :00:14.3: SecBoot CPU1 Status: 0x5c23, CPU2 Status: 0x3 [ 11.159281] iwlwifi :00:14.3: Failed to start RT ucode: -110 [ 11.159288] iwlwifi :00:14.3: Firmware not running - cannot dump error [ 11.170675] iwlwifi :00:1
[Bug 989189] Re: Installing 12.04 crashes virtualbox and host
Looking into https://wiki.ubuntu.com/Bugs/FindRightPackage I decided that the most propably package is ubiquity. ** Package changed: ubuntu => ubiquity (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/989189 Title: Installing 12.04 crashes virtualbox and host To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/989189/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 989189] [NEW] Installing 12.04 crashes virtualbox and host
Public bug reported: When I try to install 12.04 desktop 32bit in my virtual box the screen gets immediately black and I get no reaction any more. Not only that 12.04 crashes my virtual box but also my host system. I have to switch off the computer and to power it on again. VirtualBox on my lucid is 4.1.12, just updated to the latest version available. What can I do to trace which command causes the crash? Michael Schwartzkopff ** Affects: ubuntu Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/989189 Title: Installing 12.04 crashes virtualbox and host To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/989189/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 658397] Re: 10.10 does not install in virtualbox (black screen)
Well, no logs since I have a black screen during boot of 10.10. -- 10.10 does not install in virtualbox (black screen) https://bugs.launchpad.net/bugs/658397 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 658397] [NEW] 10.10 does not install in virtualbox (black screen)
Public bug reported: Binary package hint: ubiquity Hi, starting kubuntu 10.10 in a virtual box results in a black screen. My system: 32bit, 23 bit to be installed, virtual box 3.2.8 on ubuntu 10.4. Log: ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New -- 10.10 does not install in virtualbox (black screen) https://bugs.launchpad.net/bugs/658397 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 510571] Re: Lucid guest won't boot with acpi in virtualbox
Hi, works for me now in Lucid beta release. Greetings, Michael Schwartzkopff -- Lucid guest won't boot with acpi in virtualbox https://bugs.launchpad.net/bugs/510571 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 510571] Re: Lucid guest won't boot with acpi in virtualbox
Am Freitag, 19. März 2010 00:28:11 schrieb arand: > This bug seems to be no longer present on the version of virtualbox that > is in current Lucid, hence setting the status to fixed. No. With the no-acpi option I can install lucid, but after the first boot it still crashes. Blue bars start to move from left to right but after 20% of the size the virtual machine crashes. Greetings, -- Dr. Michael Schwartzkopff MultiNET Services GmbH Addresse: Bretonischer Ring 7; 85630 Grasbrunn; Germany Tel: +49 - 89 - 45 69 11 0 Fax: +49 - 89 - 45 69 11 21 mob: +49 - 174 - 343 28 75 mail: mi...@multinet.de web: www.multinet.de Sitz der Gesellschaft: 85630 Grasbrunn Registergericht: Amtsgericht München HRB 114375 Geschäftsführer: Günter Jurgeneit, Hubert Martens --- PGP Fingerprint: F919 3919 FF12 ED5A 2801 DEA6 AA77 57A4 EDD8 979B Skype: misch42 -- Lucid guest won't boot with acpi in virtualbox https://bugs.launchpad.net/bugs/510571 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 322894] Re: Update to kernel 2.6.27-11 crashes virtualbox
Am Freitag, 12. März 2010 18:18:12 schrieb Jeremy Foshee: > Hi Michael, > > This bug was reported a while ago and there hasn't been any activity in > it recently. We were wondering if this is still an issue? Can you try > with the latest development release of Ubuntu? ISO CD images are > available from http://cdimage.ubuntu.com/releases/lucid. Hi, I tried already with alpha3, but the problem remains. > If it remains an issue, could you run the following command from a > Terminal (Applications->Accessories->Terminal). It will automatically > gather and attach updated debug information to this report. > > apport-collect -p linux 322894 No, I cannot create such a bug report since it is not possible to install the machine. > Also, if you could test the latest upstream kernel available that would > be great. It will allow additional upstream developers to examine the > issue. Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Once > you've tested the upstream kernel, please remove the 'needs-upstream- > testing' tag. This can be done by clicking on the yellow pencil icon > next to the tag located at the bottom of the bug description and > deleting the 'needs-upstream-testing' text. Please let us know your > results. > > Thanks in advance. No, no install of lucid possible. Sorry. Greetings, -- Dr. Michael Schwartzkopff MultiNET Services GmbH Addresse: Bretonischer Ring 7; 85630 Grasbrunn; Germany Tel: +49 - 89 - 45 69 11 0 Fax: +49 - 89 - 45 69 11 21 mob: +49 - 174 - 343 28 75 mail: mi...@multinet.de web: www.multinet.de Sitz der Gesellschaft: 85630 Grasbrunn Registergericht: Amtsgericht München HRB 114375 Geschäftsführer: Günter Jurgeneit, Hubert Martens --- PGP Fingerprint: F919 3919 FF12 ED5A 2801 DEA6 AA77 57A4 EDD8 979B Skype: misch42 -- Update to kernel 2.6.27-11 crashes virtualbox https://bugs.launchpad.net/bugs/322894 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 508777] Re: virtualbox: Lucid alpha2 does not boot
Hi, It seems to be a kernel bus in 2.6.32. I updated my VirtualBox to version 3.1.4 (sic !) which includes a workaround for a bug in the 2.6.32 kernel, virtualization part. See bug 6100 of virtualbox. Not alpha2 of lucid boots, well at least I see other problems. So I think this problem should be solved upstream. Greetings, Michael Schwartzkopff. -- virtualbox: Lucid alpha2 does not boot https://bugs.launchpad.net/bugs/508777 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 508777] [NEW] Lucid alpha2 does not boot
Public bug reported: My system: AMD64, virtualbox 3.1.2. In this environment LL-A2 boots three lines: fsck from util-linux-ng 2.16 /dev/sda1: clean, 48097/247008 files, 209377/987989 blocks [7.688297] piix_smbus :00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr Then the machine freezes. Greetings, Michael Schwartzkopff. ** Affects: ubuntu Importance: Undecided Status: New -- Lucid alpha2 does not boot https://bugs.launchpad.net/bugs/508777 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 442952] Re: pacemaker-openais causes high cpu load
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/33018479/Dependencies.txt -- pacemaker-openais causes high cpu load https://bugs.launchpad.net/bugs/442952 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 442952] [NEW] pacemaker-openais causes high cpu load
Public bug reported: Binary package hint: pacemaker-openais hi, there is a bug in pacemaker-openais. When you start corosync you will see that corosync shows a high cpu load. this was fixed in the upstream packages in Aug 17th. See: http://hg.clusterlabs.org/pacemaker/stable-1.0/rev/33da369d36e3 beekhof changed the 100ms to 1 second. Then the load drops down. Greetings, misch. ProblemType: Bug Architecture: i386 Date: Mon Oct 5 11:20:30 2009 DistroRelease: Ubuntu 9.10 Package: pacemaker-openais 1.0.5+hg20090813-0ubuntu3 ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-11.36-generic SourcePackage: pacemaker Uname: Linux 2.6.31-11-generic i686 ** Affects: pacemaker (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 -- pacemaker-openais causes high cpu load https://bugs.launchpad.net/bugs/442952 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 322886] Re: Notebook crashes after suspend with new Kernel 2.6.27-11-generic
Hi, 1) Suspend to RAM from KDE Nothing (!) in /var/log/kern.log /var/log/syslog: Feb 11 09:38:17 mucnb004 last message repeated 2 times Feb 11 09:38:22 mucnb004 NetworkManager: Sleeping... Feb 11 09:38:22 mucnb004 NetworkManager: (eth1): now unmanaged Feb 11 09:38:22 mucnb004 NetworkManager: (eth1): device state change: 8 -> 1 Feb 11 09:38:22 mucnb004 NetworkManager: (eth1): deactivating device (reason: 37). Feb 11 09:38:22 mucnb004 NetworkManager: eth1: canceled DHCP transaction, dhcp client pid 6328 Feb 11 09:38:22 mucnb004 NetworkManager: (eth1): removing resolv.conf from /sbin/resolvconf Feb 11 09:38:22 mucnb004 NetworkManager: check_one_route(): (eth1) error -34 returned from rtnl_route_del(): Sucess Feb 11 09:38:22 mucnb004 avahi-daemon[4808]: Withdrawing address record for 192.168.144.111 on eth1. Feb 11 09:38:22 mucnb004 avahi-daemon[4808]: Leaving mDNS multicast group on interface eth1.IPv4 with address 192.168.144.111. Feb 11 09:38:22 mucnb004 NetworkManager: (eth1): cleaning up... Feb 11 09:38:22 mucnb004 avahi-daemon[4808]: Interface eth1.IPv4 no longer relevant for mDNS. Feb 11 09:38:22 mucnb004 NetworkManager: (eth1): taking down device. Feb 11 09:38:22 mucnb004 avahi-daemon[4808]: Withdrawing address record for fe80::212:f0ff:fe64:4a5f on eth1. Feb 11 09:38:23 mucnb004 acpid: client has disconnected I had to reboot hard by switching off the system with long power-off. 2) root enters pm-suspend. Waking up possible, but colors are horrible. Have to reboot to get colors correct. /var/log/kern.log: Feb 11 09:48:26 mucnb004 kernel: [ 171.954630] PM: Syncing filesystems ... done. Feb 11 09:48:26 mucnb004 kernel: [ 171.980468] PM: Preparing system for mem sleep Feb 11 09:48:26 mucnb004 kernel: [ 171.980472] Freezing user space processes ... (elapsed 0.00 seconds) done. Feb 11 09:48:26 mucnb004 kernel: [ 171.981534] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Feb 11 09:48:26 mucnb004 kernel: [ 171.981578] PM: Entering mem sleep Feb 11 09:48:26 mucnb004 kernel: [ 171.981581] Suspending console(s) (use no_console_suspend to debug) Feb 11 09:48:26 mucnb004 kernel: [ 171.983781] btusb_intr_complete: hci0 urb f5dff080 failed to resubmit (2) Feb 11 09:48:26 mucnb004 kernel: [ 172.270059] sd 0:0:0:0: [sda] Synchronizing SCSI cache Feb 11 09:48:26 mucnb004 kernel: [ 172.270392] sd 0:0:0:0: [sda] Stopping disk Feb 11 09:48:26 mucnb004 kernel: [ 173.750996] ACPI handle has no context! Feb 11 09:48:26 mucnb004 kernel: [ 173.752429] parport_pc 00:03: disabled Feb 11 09:48:26 mucnb004 kernel: [ 173.753277] ACPI handle has no context! Feb 11 09:48:26 mucnb004 kernel: [ 173.753286] sdhci-pci :02:06.4: PCI INT C disabled Feb 11 09:48:26 mucnb004 kernel: [ 173.753293] ACPI handle has no context! Feb 11 09:48:26 mucnb004 kernel: [ 173.770085] ACPI handle has no context! Feb 11 09:48:26 mucnb004 kernel: [ 173.770092] tifm_7xx1 :02:06.3: PCI INT B disabled Feb 11 09:48:26 mucnb004 kernel: [ 173.770100] ACPI handle has no context! Feb 11 09:48:26 mucnb004 kernel: [ 173.790111] ACPI handle has no context! Feb 11 09:48:26 mucnb004 kernel: [ 173.810125] eth1: Going into suspend... Feb 11 09:48:26 mucnb004 kernel: [ 173.810341] ipw2200 :02:04.0: PCI INT A disabled Feb 11 09:48:26 mucnb004 kernel: [ 174.190188] ata2: port disabled. ignoring. Feb 11 09:48:26 mucnb004 kernel: [ 174.190238] ata_piix :00:1f.1: PCI INT A disabled Feb 11 09:48:26 mucnb004 kernel: [ 174.190479] codec_write 0: semaphore is not ready for register 0x26 Feb 11 09:48:26 mucnb004 kernel: [ 174.190487] Intel ICH :00:1e.2: PCI INT A disabled Feb 11 09:48:26 mucnb004 kernel: [ 174.190602] ehci_hcd :00:1d.7: PCI INT A disabled Feb 11 09:48:26 mucnb004 kernel: [ 174.210106] uhci_hcd :00:1d.2: PCI INT C disabled Feb 11 09:48:26 mucnb004 kernel: [ 174.210139] uhci_hcd :00:1d.1: PCI INT B disabled Feb 11 09:48:26 mucnb004 kernel: [ 174.210171] uhci_hcd :00:1d.0: PCI INT A disabled Feb 11 09:48:26 mucnb004 kernel: [ 174.219268] PM: suspend devices took 2.230 seconds Feb 11 09:48:26 mucnb004 kernel: [ 174.219697] ACPI: Preparing to enter system sleep state S3 Feb 11 09:48:26 mucnb004 kernel: [ 174.220089] Disabling non-boot CPUs ... Feb 11 09:48:26 mucnb004 kernel: [ 174.220089] Back to C! Feb 11 09:48:26 mucnb004 kernel: [ 174.220089] Force enabled HPET at resume Feb 11 09:48:26 mucnb004 kernel: [ 174.220089] ACPI: Waking up from system sleep state S3 (...) Stange. This all was logged at the same time. Perhaps syslog wrote it only after recovery. That was my experience. Michael. -- Notebook crashes after suspend with new Kernel 2.6.27-11-generic https://bugs.launchpad.net/bugs/322886 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 90681] Re: resolv.conf overwritten using VPN/PPP etc...
Hi, When I started my notebook looking at the log entries I saw something like: resolvconf: unable to remove (...)/eth1/resolv.conf. File system read only. This entry does not appear in dmesg and syslog. But the behaviour is reproducable evey system start. Perhaps this helps fixing this annoying bug. Thanks. Michael. -- resolv.conf overwritten using VPN/PPP etc... https://bugs.launchpad.net/bugs/90681 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 54273] Re: USB device not accepting address: error -110
Hi, I see the same errors here on my notebook (kernel 2.6.27-11) when I connect my usb mouse. When I remove uhci_hcd and reload it I get the error: (...) Feb 5 09:14:44 mucnb004 kernel: [ 1544.101840] uhci_hcd :00:1d.2: irq 18, io base 0x3040 Feb 5 09:14:44 mucnb004 kernel: [ 1544.101840] usb usb4: configuration #1 chosen from 1 choice Feb 5 09:14:44 mucnb004 kernel: [ 1544.101840] hub 4-0:1.0: USB hub found Feb 5 09:14:44 mucnb004 kernel: [ 1544.101840] hub 4-0:1.0: 2 ports detected Feb 5 09:14:44 mucnb004 kernel: [ 1544.120415] usb 2-2: device descriptor read/64, error -71 Feb 5 09:14:45 mucnb004 kernel: [ 1544.350616] usb 2-2: device descriptor read/64, error -71 Feb 5 09:14:45 mucnb004 kernel: [ 1544.640077] usb 2-2: new low speed USB device using uhci_hcd and address 3 Feb 5 09:14:45 mucnb004 kernel: [ 1544.760085] usb 2-2: device descriptor read/64, error -71 Feb 5 09:14:45 mucnb004 kernel: [ 1544.990109] usb 2-2: device descriptor read/64, error -71 Feb 5 09:14:45 mucnb004 kernel: [ 1545.220099] usb 2-2: new low speed USB device using uhci_hcd and address 4 Feb 5 09:14:46 mucnb004 kernel: [ 1545.640089] usb 2-2: device not accepting address 4, error -71 Feb 5 09:14:46 mucnb004 kernel: [ 1545.760124] usb 2-2: new low speed USB device using uhci_hcd and address 5 Feb 5 09:14:46 mucnb004 kernel: [ 1546.180100] usb 2-2: device not accepting address 5, error -71 Feb 5 09:14:46 mucnb004 kernel: [ 1546.180174] hub 2-0:1.0: unable to enumerate USB device on port 2 Feb 5 09:14:46 mucnb004 kernel: [ 1546.300113] usb 3-2: new full speed USB device using uhci_hcd and address 2 Feb 5 09:14:47 mucnb004 kernel: [ 1546.420116] usb 3-2: device descriptor read/64, error -71 Feb 5 09:14:47 mucnb004 kernel: [ 1546.450023] uhci_hcd :00:1d.1: host controller process error, something bad happened! Feb 5 09:14:47 mucnb004 kernel: [ 1546.450023] uhci_hcd :00:1d.1: host controller halted, very bad! Feb 5 09:14:47 mucnb004 kernel: [ 1546.450023] uhci_hcd :00:1d.1: HC died; cleaning up Feb 5 09:14:47 mucnb004 kernel: [ 1546.530137] hub 3-0:1.0: cannot reset port 2 (err = -19) Feb 5 09:14:47 mucnb004 kernel: [ 1546.530173] hub 3-0:1.0: cannot disable port 2 (err = -19) Feb 5 09:14:47 mucnb004 kernel: [ 1546.530218] hub 3-0:1.0: cannot reset port 2 (err = -19) Feb 5 09:14:47 mucnb004 kernel: [ 1546.530237] hub 3-0:1.0: cannot disable port 2 (err = -19) Feb 5 09:14:47 mucnb004 kernel: [ 1546.530257] hub 3-0:1.0: cannot reset port 2 (err = -19) Feb 5 09:14:47 mucnb004 kernel: [ 1546.530275] hub 3-0:1.0: cannot disable port 2 (err = -19) Feb 5 09:14:47 mucnb004 kernel: [ 1546.530296] hub 3-0:1.0: cannot reset port 2 (err = -19) Feb 5 09:14:47 mucnb004 kernel: [ 1546.530314] hub 3-0:1.0: cannot disable port 2 (err = -19) Feb 5 09:14:47 mucnb004 kernel: [ 1546.530330] hub 3-0:1.0: unable to enumerate USB device on port 2 Feb 5 09:14:47 mucnb004 kernel: [ 1546.530345] hub 3-0:1.0: cannot disable port 2 (err = -19) Only a shutdown and restart of my notebook helps. Michael. -- USB device not accepting address: error -110 https://bugs.launchpad.net/bugs/54273 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 90681] Re: resolv.conf overwritten using VPN/PPP etc...
Hi, I think I get the same problem here on my 8.10. I connect to different wireless LANs with my notebook. I also use openvpn and vpnc. My problem ist, that dhcpcd somehow REMEMBERS its resolv.conf configurations and still applies settings from different WLANs or VPNs when I connect to new WLANs. I have to edit my resolv.conf every time manually. Michael. -- resolv.conf overwritten using VPN/PPP etc... https://bugs.launchpad.net/bugs/90681 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 322886] Re: Notebook crashes after suspend with new Kernel 2.6.27-11-generic
** Attachment added: "Compac nx8220 lspci" http://launchpadlibrarian.net/2182/lspci.txt -- Notebook crashes after suspend with new Kernel 2.6.27-11-generic https://bugs.launchpad.net/bugs/322886 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 322886] Re: Notebook crashes after suspend with new Kernel 2.6.27-11-generic
** Attachment added: "Compac nx8220 lsmod" http://launchpadlibrarian.net/21899988/lsmod.txt -- Notebook crashes after suspend with new Kernel 2.6.27-11-generic https://bugs.launchpad.net/bugs/322886 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 322886] Re: Notebook crashes after suspend with new Kernel 2.6.27-11-generic
hi, My original bug was marked duplicate of this one. So I try to help here: $ cat /proc/version_signature Ubuntu 2.6.27-11.27-server dmesg, lscpi and lsmod attached below. Michael. --- ** Attachment added: "Compac nx8220 dmesg" http://launchpadlibrarian.net/21899980/dmesg.txt -- Notebook crashes after suspend with new Kernel 2.6.27-11-generic https://bugs.launchpad.net/bugs/322886 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 323075] [NEW] Update to kernel 2.6.27-11 make "supend to RAM" unusable
Public bug reported: Binary package hint: linux-image-2.6.27-11-server Hi, after upgrade to kernel 2.6.27-11-server "Suspend to RAM" doesn't work any more on the Compaq nx8220 notebook. It worked before with 2.6.27-9. - Putting the notebook to sleep is OK. Power LED is blinking fro mtime to time. - Waking it up starts normal: HDD LED flashes and power LED also is switched on. - But then nothing. Dark screen and no reaction to any key any more. I have to switch off the computer and reboot it. Please mail me how can I help you in tracking this bug further. Michael. ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- Update to kernel 2.6.27-11 make "supend to RAM" unusable https://bugs.launchpad.net/bugs/323075 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 322894] [NEW] Update to kernel 2.6.27-11 crashes virtualbox
Public bug reported: Binary package hint: linux-headers-2.6.27-11-server Hi, I just upgrades to kernel version 2.6.27-11. After restart virtualbox version 2.1.2 fails to start. Searching a little bit in the internet I tried to /etc/init.d/vboxdrv setup Recompiling the kernel virtualbox module failed with the error log /var/log/vbox-install.log: Attempting to install using DKMS removing old DKMS module vboxdrv version Error! Invalid number of parameters passed. Usage: remove -m -v --all or: remove -m -v -k -- Deleting module version: 2.1.2 completely from the DKMS tree. -- Done. Creating symlink /var/lib/dkms/vboxdrv/2.1.2/source -> /usr/src/vboxdrv-2.1.2 DKMS: add Completed. Error! Your kernel source for kernel 2.6.27-11-server cannot be found at /lib/modules/2.6.27-11-server/build or /lib/modules/2.6.27-11-server/source. You can use the --kernelsourcedir option to tell DKMS where it's located. Failed to install using DKMS, attempting to install without Makefile:143: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR= and run Make again. Schluss. It seems the kernel module recompile doesn't find the correct kernel headers. uname -r says 2.6.27-11-server but there is no package called linux-header-2.6.27-11-server for MY architecture (i386). I only find a package for x86_64 architecture. ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- Update to kernel 2.6.27-11 crashes virtualbox https://bugs.launchpad.net/bugs/322894 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 293206] Re: Sort Date In Kontact To-Do List Ignores Year
HI, This bug affects also the todo list in kontact. The workaround described above does not work for me. This bus already is solved in KDE 4.1.4 and 4.2.0. See: http://mail.kde.org/pipermail/korganizer-devel/2008-December/003942.html Michael. -- Sort Date In Kontact To-Do List Ignores Year https://bugs.launchpad.net/bugs/293206 You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to kdepim in ubuntu. -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs