[Bug 1709708] Re: Intel Broxton HDMI, Digital Out, HDMI] Pulseaudio detects output but produces no sound on NUC6CAYH
Also see askubuntu question: https://askubuntu.com/questions/944735 /silent-hdmi-sound-with- nuc6cayh-16-04?noredirect=1#comment1505598_944735 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709708 Title: Intel Broxton HDMI, Digital Out, HDMI] Pulseaudio detects output but produces no sound on NUC6CAYH To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1709708/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709708] [NEW] Intel Broxton HDMI, Digital Out, HDMI] Pulseaudio detects output but produces no sound on NUC6CAYH
Public bug reported: Upon bootup, the HDMI output connected to a Samsung TV shows up as an output. If this output is selected and a sound test run (either using the GUI or using aplay /user/share/sounds/alsa/Front_Center.wav) no sound is heard. Pavumeter does however show sound coming through. I found that sound can be fixed by allowing the display to sleep, waking it up, and then restarting pulseaudio (pulseaudio -k). After that sound output through HDMI to the TV will work until rebooted. The fix can be succesfully scripted as follows: xset dpms force off sleep 1 pulseaudio -k The machine is an Intel NUC6CAYH, connected to a not particularly new Samsung 42" TV using an HDMI cable, running a fresh install of Ubuntu 16.04. In earlier attempts at fixing the issue I set pulseaudio to never let the sound device sleep (commented out load-module module-suspend-on-idle in /etc/pulse/default.pa), and also set the default sampling rate to 48000 (default-sample-rate = 48000 in /etc/pulse/daemon.conf). Not sure if these settings contributed to the fix, but they are not sufficient on their own. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: pulseaudio 1:8.0-0ubuntu3.3 ProcVersionSignature: Ubuntu 4.10.0-30.34~16.04.1-generic 4.10.17 Uname: Linux 4.10.0-30-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 Date: Wed Aug 9 21:48:39 2017 InstallationDate: Installed on 2017-08-06 (2 days ago) InstallationMedia: Ubuntu 16.04.3 LTS "Xenial Xerus" - Release amd64 (20170801) SourcePackage: pulseaudio Symptom: audio Symptom_Card: HDA-Intel - HDA Intel PCH Symptom_Jack: Digital Out, HDMI Title: [, Intel Broxton HDMI, Digital Out, HDMI] Pulseaudio fails to detect card UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/24/2016 dmi.bios.vendor: Intel Corp. dmi.bios.version: AYAPLCEL.86A.0029.2016.1124.1625 dmi.board.name: NUC6CAYB dmi.board.vendor: Intel Corporation dmi.board.version: J23203-402 dmi.chassis.type: 3 dmi.modalias: dmi:bvnIntelCorp.:bvrAYAPLCEL.86A.0029.2016.1124.1625:bd11/24/2016:svn:pn:pvr:rvnIntelCorporation:rnNUC6CAYB:rvrJ23203-402:cvn:ct3:cvr: modified.conffile..etc.pulse.daemon.conf: [modified] modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.daemon.conf: 2017-08-06T22:55:35.510382 mtime.conffile..etc.pulse.default.pa: 2017-08-06T22:51:49.639085 ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial ** Description changed: Upon bootup, the HDMI output connected to a Samsung TV shows up as an output. If this output is selected and a sound test run (either using - the GUI or using aplay /user/share/sounds/alsa/Front_Center.wav, no + the GUI or using aplay /user/share/sounds/alsa/Front_Center.wav) no sound is heard. Pavumeter does however show sound coming through. I found that sound can be fixed by allowing the display to sleep, waking it up, and then restarting pulseaudio (pulseaudio -k). After that sound output through HDMI to the TV will work until rebooted. The fix can be succesfully scripted as follows: xset dpms force off sleep 1 pulseaudio -k The machine is an Intel NUC6CAYH, connected to a not particularly new Samsung 42" TV using an HDMI cable, running a fresh install of Ubuntu 16.04. In earlier attempts at fixing the issue I set pulseaudio to never let the sound device sleep (commented out load-module module-suspend-on-idle in /etc/pulse/default.pa), and also set the default sampling rate to 48000 (default-sample-rate = 48000 in /etc/pulse/daemon.conf). Not sure if these settings contributed to the fix, but they are not sufficient on their own. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: pulseaudio 1:8.0-0ubuntu3.3 ProcVersionSignature: Ubuntu 4.10.0-30.34~16.04.1-generic 4.10.17 Uname: Linux 4.10.0-30-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 Date: Wed Aug 9 21:48:39 2017 InstallationDate: Installed on 2017-08-06 (2 days ago) InstallationMedia: Ubuntu 16.04.3 LTS "Xenial Xerus" - Release amd64 (20170801) SourcePackage: pulseaudio Symptom: audio Symptom_Card: HDA-Intel - HDA Intel PCH Symptom_Jack: Digital Out, HDMI Title: [, Intel Broxton HDMI, Digital Out, HDMI] Pulseaudio fails to detect card UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/24/2016 dmi.bios.vendor: Intel Corp. dmi.bios.version: AYAPLCEL.86A.0029.2016.1124.1625 dmi.board.name: NUC6CAYB dmi.board.vendor: Intel Corporation dmi.board.version: J23203-402 dmi.chassis.type: 3 dmi.modalias: dmi:bvnIntelCorp.:bvrAYAPLCEL.86A.0029.2016.1124.1625:bd11/24/2016:svn:pn:pvr:rvnIntelCorporation:rnNUC6CAYB:rvrJ23203-402:cvn:ct3:cvr: modified.conffile..etc.pulse.daemon.conf: [modified] modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.daemon.conf: 2017-08-06T22:55:35.510382
[Bug 736970] Re: Evince generates large print jobs that never complete
Seems to be OK in Ubuntu 15.04. I vote for closing the bug. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/736970 Title: Evince generates large print jobs that never complete To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evince/+bug/736970/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1081348] [NEW] Wifi cannot be reneabled after disabling 'wireless networking' in network manager
Public bug reported: Output of lsb_release -rd: Description:Ubuntu 12.04.1 LTS Release:12.04 On a Sony Vaio YB4A Notebook, once 'wireless networking' is unchecked in the networking panel app, it cannot be enabled using the panel app again. Manually issuing 'rfkill unblock wifi' does seem to reactivate the wifi. The symptoms vary. Sometimes the panel app will claim that the wifi is disabled by the kill switch. Other times it will pretend to renable wifi,but it won't connect to anything until the rfkill command is issued. ** Affects: ubuntu Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1081348 Title: Wifi cannot be reneabled after disabling 'wireless networking' in network manager To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1081348/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 873953] [NEW] Non-sensical nfs error message when server is down
Public bug reported: When trying to do an nfs mount of a server that is down, the non- sensical error message 'mount.nfs: an incorrect mount option was specified' is returned. E.g. user@client:~$ sudo mount -t nfs server:/export /mnt/mntpt mount.nfs: an incorrect mount option was specified If the -v option is passed to mount, the real problem is revealed: user@client:~$ sudo mount -v -t nfs server:/export /mnt/mntpt mount.nfs: timeout set for Fri Oct 14 10:32:43 2011 mount.nfs: text-based options: 'addr=192.168.10.58' mount.nfs: mount(2): Operation not supported mount.nfs: mount to NFS server 'server:/export' failed: RPC Error: Program not registered ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: nfs-common 1:1.2.0-4ubuntu4.1 ProcVersionSignature: Ubuntu 2.6.32-30.59-generic 2.6.32.29+drm33.13 Uname: Linux 2.6.32-30-generic x86_64 Architecture: amd64 Date: Fri Oct 14 10:25:47 2011 ProcEnviron: LANG=en_ZA.UTF-8 SHELL=/bin/bash SourcePackage: nfs-utils ** Affects: nfs-utils (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug lucid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/873953 Title: Non-sensical nfs error message when server is down To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nfs-utils/+bug/873953/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 873953] Re: Non-sensical nfs error message when server is down
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/873953 Title: Non-sensical nfs error message when server is down To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nfs-utils/+bug/873953/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 599846] Re: firefox right click open containing folder should highlight file
This issue is particularly problematic when you have a lot of files in your download directory. Given that firefox downloads to $HOME/Downloads by default, I suspect that goes for most people. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/599846 Title: firefox right click open containing folder should highlight file -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 599846] Re: firefox right click open containing folder should highlight file
Forgotto add, bug was originally reported for lucid, but still unresolved in Maverick -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/599846 Title: firefox right click open containing folder should highlight file -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 736970] [NEW] Evince generates large print jobs that never complete
Public bug reported: Binary package hint: evince If I print a document (such as the one attached below), evince generates large print jobs (~3MB for the 9 page doc attached) that takes forever to print. While wating, a ghostscript process (gs) takes 100% cpu. This process does not complete within a reasonable time (I cancelled the job after waiting 20 minutes). Using xpdf to print the same document results in a ~800kb printjob that prints almost instantly. ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: evince 2.32.0-0ubuntu1.1 ProcVersionSignature: Ubuntu 2.6.38-3.30-generic 2.6.38-rc4 Uname: Linux 2.6.38-3-generic x86_64 Architecture: amd64 Date: Thu Mar 17 18:25:42 2011 InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007) ProcEnviron: LANGUAGE=en_US:en LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: evince ** Affects: evince (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug maverick -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/736970 Title: Evince generates large print jobs that never complete -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 736970] Re: Evince generates large print jobs that never complete
** Attachment added: Document that causes evince to exhibit bad printing behaviour https://bugs.launchpad.net/bugs/736970/+attachment/1915129/+files/martin98.pdf -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/736970 Title: Evince generates large print jobs that never complete -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 736970] Re: Evince generates large print jobs that never complete
Oh, forgot to mention, I figured this out thanks to a forum post reporting the samebehaviour: http://ubuntuforums.org/showthread.php?p=10570469 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/736970 Title: Evince generates large print jobs that never complete -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720248] [NEW] emacs23 doesn't save toolbar visibility when choosing Save Options from Options menu
Public bug reported: Binary package hint: emacs23 It seems that some settings are not saved when using the Options menu. For example, if I change the visibility of column numbers, the setting is saved. In the minibuffer I can see a message to the effect that .emacs.d/init.el was written. If I change the visibility of the toolbar, it is not saved, and no message about writing init.el is shown. This is running an up to date Maverick install. The problem occurs even if I delete my init.el file. ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: emacs23 23.1+1-4ubuntu7.1+maverick1 ProcVersionSignature: Ubuntu 2.6.35-24.42-generic 2.6.35.8 Uname: Linux 2.6.35-24-generic x86_64 Architecture: amd64 Date: Wed Feb 16 20:06:49 2011 InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007) ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash SourcePackage: emacs23 ** Affects: emacs23 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug maverick -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720248 Title: emacs23 doesn't save toolbar visibility when choosing Save Options from Options menu -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720248] Re: emacs23 doesn't save toolbar visibility when choosing Save Options from Options menu
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720248 Title: emacs23 doesn't save toolbar visibility when choosing Save Options from Options menu -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 160311] Re: Resizing windows by grabbing window borders is difficult
In reply to #245 by The Fiddler: I'm not sure if our experience differs or if I did not explain my proposed solution well enough. I find that I have no difficulty getting the resize pointer to appear momentarily while moving across the window border, the problem lies in actually clicking while the resize pointer is active. The proposed solution would fix that, since the resize pointer will remain active for several pixels once activated. In any case, so long as a working solution if shipped in Natty I guess I'm satsified! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/160311 Title: Resizing windows by grabbing window borders is difficult -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 160311] Re: Resizing windows by grabbing window borders is difficult
In reply to #245 by The Fiddler: I'm not sure if our experience differs or if I did not explain my proposed solution well enough. I find that I have no difficulty getting the resize pointer to appear momentarily while moving across the window border, the problem lies in actually clicking while the resize pointer is active. The proposed solution would fix that, since the resize pointer will remain active for several pixels once activated. In any case, so long as a working solution if shipped in Natty I guess I'm satisfied! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/160311 Title: Resizing windows by grabbing window borders is difficult -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 160311] Re: Resizing windows by grabbing window borders is difficult [please no more comments; patches welcome]
I think a good modification to the invisible drag handle proposal would be to rather use resize border resistance. This is a solution that won't require more than 1 px of UI space to work well. How I envisage it working is: 1) keep your arbitrarily small window border resize 2) Define a resize-resistance size, say 5 px 3) Once the user moves the pointer over the resize edge, the resize cursor will appear 4) The resize cursor will remain active until the user moves the pointer at lease 'resize-resistance' many pixels away from the resize edge 5) Click-and-hold while the resize cursor is active will result in window resizing. This seems to me like it should have 100% backward compatibility, require only changes to the window manager, will be theme independent and will still be easy to use. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/160311 Title: Resizing windows by grabbing window borders is difficult [please no more comments; patches welcome] -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 432353] Re: ath5k: phy0: failed to wakeup the MAC Chip
Most recent comment (#18) on upstream bug http://bugzilla.kernel.org/show_bug.cgi?id=15382 seems to indicate that the kernel option: CONFIG_PCIEASPM=y solved the problem for one user at least. Checking on my 10.04 system: brick@sneeupenaar:~$ cat /boot/config-2.6.32-27-generic | grep -i aspm # CONFIG_PCIEASPM is not set indeed indicates that the option is not set. My little Aspire one hardly has space left on its 8GB SSD to do a kernel compile, but if someone could package up such a kernel I'd be more than willing to test on my machine! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/432353 Title: ath5k: phy0: failed to wakeup the MAC Chip -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 164674] Re: xpdf prints equations as garbage
Daniel: I don't currently have an 8.10 machine available to test on (might in a couple of weeks when I get my thesis finished). Could someone else perhaps try it? Should only take a minute (open file in xpdf, print to file, view the resulting ps file). Thanks Neilen -- xpdf prints equations as garbage https://bugs.launchpad.net/bugs/164674 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 164674] Re: xpdf prints equations as garbage
Just saw that this bug actually pre-dates 8.04 too. My current 8.04 install exhibits the same behaviour. -- xpdf prints equations as garbage https://bugs.launchpad.net/bugs/164674 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 164676] Re: evince prints equations with bad quality
The new poppler debs seem to to have hit the archive yet, but is it likely that I can install the new debs on a hardy installation? Otherwise, should I request a backport? Thanks -- evince prints equations with bad quality https://bugs.launchpad.net/bugs/164676 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 232036] [NEW] importing petsc4py.PETSc results in segfault
Public bug reported: Binary package hint: python-petsc4py Runnin ubuntu hardy (8.04), AMD64 arch: $ python Python 2.5.2 (r252:60911, Apr 21 2008, 11:17:30) [GCC 4.2.3 (Ubuntu 4.2.3-2ubuntu7)] on linux2 Type help, copyright, credits or license for more information. import petsc4py.PETSc Segmentation fault Some pacake info: $ wajig detail petsc-dev | grep Version Version: 2.3.3-6ubuntu1 $ wajig detail python-petsc4py | grep Version Version: 0.7.5-4 Python-Version: 2.4, 2.5 $ wajig detail python-numpy | grep Version Version: 1:1.0.4-6ubuntu3 Python-Version: 2.4, 2.5 Not sure if it's ubuntu specific. I also get a segfault if I use numpy SVN and compile petsc4py 0.7.5 myself. ** Affects: petsc4py (Ubuntu) Importance: Undecided Status: New -- importing petsc4py.PETSc results in segfault https://bugs.launchpad.net/bugs/232036 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 178136] [hardy] Inskape corrupts file when saving ODG (open document drawing) format
Re checked in hardy (AMD64). Inkscape does export successfully, but oodraw claims the file is corrupt if I try to open it and won't display. I'm not sure if is is oodraw of inkscape's fault. In any case, should I file a new bug? Since inkscape is no longer crashing I guess this one can be closed. I attach the .svg and .odg files so that they can be checked. ** Attachment added: Broken odg output from inkscape http://launchpadlibrarian.net/14369364/six-pyramids-in-a-brick.odg -- [gutsy] Inskape uses all available memory when saving ODG (open document drawing) format https://bugs.launchpad.net/bugs/178136 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 178136] [hardy] Inskape corrupts file when saving ODG (open document drawing) format
** Attachment added: Inkscape original file http://launchpadlibrarian.net/14369386/six-pyramids-in-a-brick.svg -- [gutsy] Inskape uses all available memory when saving ODG (open document drawing) format https://bugs.launchpad.net/bugs/178136 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 8764] Re: Disk doesn't show free space in 'filesystem'
Yep, fixed in released hardy as far as I'm concerned. Showing free space for the root partition is the correct behavior as far as I'm concerned... I think this bug is safe to close? -- Disk doesn't show free space in 'filesystem' https://bugs.launchpad.net/bugs/8764 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 41262] Re: Places - Computer - should show occupied/free space on removable media
This bug has been on my CC list. Seems well fixed in hardy. Safe for closing IMHO. -- Places - Computer - should show occupied/free space on removable media https://bugs.launchpad.net/bugs/41262 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 8764] Re: Disk doesn't show free space in 'filesystem'
On second thought... Filesystem is kind of a meta-concept that just happens to include the root parition. What would probably make sense is to summarise all the mounted filesystem's info somehow. This is actually a surprisingly complicated issue to present completely logically in an UI ;) Perhaps it needs a new usability bug? -- Disk doesn't show free space in 'filesystem' https://bugs.launchpad.net/bugs/8764 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3667] Re: multipage (2 pages to 1) print function not working
Markus: Strange, seems to WorkForMe with hardy printing from evince. -- multipage (2 pages to 1) print function not working https://bugs.launchpad.net/bugs/3667 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3337] Re: cant drag a file to a folder in new nautilus location button bar
Can confirm that this issue is still current under hardy. -- cant drag a file to a folder in new nautilus location button bar https://bugs.launchpad.net/bugs/3337 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 226177] Re: Inkscape prints wrong on updated gutsy with gnome print dialog
** Summary changed: - Inskscape prints wrong on updated gutsy with gnome print dialog + Inkscape prints wrong on updated gutsy with gnome print dialog -- Inkscape prints wrong on updated gutsy with gnome print dialog https://bugs.launchpad.net/bugs/226177 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 228284] [NEW] [hardy] Inkscape prints wrong to printer or ps file. PDF output OK
Public bug reported: Binary package hint: inkscape Attached inkscape file doesn't print correctly. Steps to reproduce 1) Open attached SVG file in inkscape 2) print to a printer or postscript file 3) observe incorrect output. Printing to a PDF file generates correct output. ** Affects: inkscape (Ubuntu) Importance: Undecided Status: New -- [hardy] Inkscape prints wrong to printer or ps file. PDF output OK https://bugs.launchpad.net/bugs/228284 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 228284] Re: [hardy] Inkscape prints wrong to printer or ps file. PDF output OK
** Attachment added: six-pyramids-in-a-brick.svg http://launchpadlibrarian.net/14369935/six-pyramids-in-a-brick.svg -- [hardy] Inkscape prints wrong to printer or ps file. PDF output OK https://bugs.launchpad.net/bugs/228284 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 228284] Re: [hardy] Inkscape prints wrong to printer or ps file. PDF output OK
** Attachment added: Correct PDF output http://launchpadlibrarian.net/14369950/output.pdf -- [hardy] Inkscape prints wrong to printer or ps file. PDF output OK https://bugs.launchpad.net/bugs/228284 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 228284] Re: [hardy] Inkscape prints wrong to printer or ps file. PDF output OK
** Attachment added: Incorrect Postscript output. Printed output looks the same. http://launchpadlibrarian.net/14369971/output.ps -- [hardy] Inkscape prints wrong to printer or ps file. PDF output OK https://bugs.launchpad.net/bugs/228284 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 164676] Re: evince prints equations with bad quality
Sebastien: Just to make your life easier, a direct link to the problem pdf: http://launchpadlibrarian.net/10528279/rieben04a.pdf I can confirm that the same issue persists in hardy, only now the size of the generated postscript file has grown to 5.3MB. -- evince prints equations with bad quality https://bugs.launchpad.net/bugs/164676 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 226177] [NEW] Inskscape prints wrong on updated gutsy with gnome print dialog
Public bug reported: Binary package hint: inkscape Printing the attached svg file results in wrong printed output. Using inkscape 0.46-0ubuntu2~gutsy1 ** Affects: inkscape (Ubuntu) Importance: Undecided Status: New -- Inskscape prints wrong on updated gutsy with gnome print dialog https://bugs.launchpad.net/bugs/226177 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 226177] Re: Inskscape prints wrong on updated gutsy with gnome print dialog
** Attachment added: twelve-pyramids-in-a-brick.svg http://launchpadlibrarian.net/14171035/twelve-pyramids-in-a-brick.svg -- Inskscape prints wrong on updated gutsy with gnome print dialog https://bugs.launchpad.net/bugs/226177 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 226177] Printed output
Printed to PDF using the gnome print dialogue. Same happens when printing to a real printer. ** Attachment added: Printing output http://launchpadlibrarian.net/14171071/output.pdf -- Inskscape prints wrong on updated gutsy with gnome print dialog https://bugs.launchpad.net/bugs/226177 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3198] Re: [radeon, savage] Starwars screensaver locks X
Hi, I've been trying with the packages from deb http://ppa.launchpad.net/tormodvolden/ubuntu gutsy main Still get the crash. I also tried enabling DRM logging, i.e. echo 1 | sudo tee /sys/module/drm/parameters/debug but my hard drive filled up before a crash happened. It did seem to get progressively slower the longer the screensaver ran. -- [radeon, savage] Starwars screensaver locks X https://bugs.launchpad.net/bugs/3198 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 178136] [gutsy] Inskape uses all available memory when saving ODG (open document drawing) format
Public bug reported: Binary package hint: inkscape In Gutsy, AMD64. Steps to recreate: 1) Open/create any drawing in Inkscape 2) select Save As ODG format Symptoms: Inkscape hangs using 100% CPU, soon filling up all memory making the system unresponsive. ** Affects: inkscape (Ubuntu) Importance: Undecided Status: New -- [gutsy] Inskape uses all available memory when saving ODG (open document drawing) format https://bugs.launchpad.net/bugs/178136 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 164676] Re: evince prints equations with bad quality
I allready have? rieben04a-evince.ps is the output of print to file in evince. The original pdf is rieben04a.pdf that is attached in Bug #164674 -- evince prints equations with bad quality https://bugs.launchpad.net/bugs/164676 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 49582] Re: PDF displays properley with evince/xpdf, prints/converts to PS with bad fonts/kerning
Congratulations, it appears to be fixed with evince in Gutsy! However, it still does the same with xpdf. -- PDF displays properley with evince/xpdf, prints/converts to PS with bad fonts/kerning https://bugs.launchpad.net/bugs/49582 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 164676] evince prints equations with bad quality
Public bug reported: Binary package hint: evince Print attached pdf file and all the math comes out blurry. Printing to postscript has the same result, PS file also attached. ** Affects: evince (Ubuntu) Importance: Undecided Status: New -- evince prints equations with bad quality https://bugs.launchpad.net/bugs/164676 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 164674] Original PDF
Original PDF file that generates the bad output ** Attachment added: rieben04a.pdf http://launchpadlibrarian.net/10528279/rieben04a.pdf -- xpdf prints equations as garbage https://bugs.launchpad.net/bugs/164674 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 164674] xpdf prints equations as garbage
Public bug reported: Binary package hint: xpdf Print attached pdf file and all the math comes out as garbage. Printing to postscript has the same result, PS file also attached. ** Affects: xpdf (Ubuntu) Importance: Undecided Status: New -- xpdf prints equations as garbage https://bugs.launchpad.net/bugs/164674 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 164674] Re: xpdf prints equations as garbage
PS output from xpdf ** Attachment added: rieben04a-xpdf.ps http://launchpadlibrarian.net/10528232/rieben04a-xpdf.ps -- xpdf prints equations as garbage https://bugs.launchpad.net/bugs/164674 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 164674] Re: xpdf prints equations as garbage
Forgot to mention that kpdf prints fine. -- xpdf prints equations as garbage https://bugs.launchpad.net/bugs/164674 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 164676] example of evince output.
Forgot to mention, kpdf prints fine. For original PDF see Bug #164674 ** Attachment added: rieben04a-evince.ps http://launchpadlibrarian.net/10528283/rieben04a-evince.ps -- evince prints equations with bad quality https://bugs.launchpad.net/bugs/164676 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3198] Re: [radeon, savage] Starwars screensaver locks X
Tried BusType PCI. Still crashes, though it seemed to last a bit longer. Might be coincidence though. -- [radeon, savage] Starwars screensaver locks X https://bugs.launchpad.net/bugs/3198 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3198] Re: [radeon, savage] Starwars screensaver locks X
Well well, I have good news and bad news. Good news: The demise of starwars in gutsy was greatly exagerated; It's still in xscreensaver-gl-extra where it's always been http://packages.ubuntu.com/cgi-bin/search_contents.pl?searchmode=filelistword=xscreensaver-gl-extraversion=gutsyarch=i386 Bad news: Still crashes as hard as ever ;((( I'm getting really frusrated for several reasons: 1) I like the starwars screensaver 2) the hard crashes undermine my confidence in general 3) It's been more than 2 years since I first reported the bug with no apparent progress 4) I don't know how to contribute to finding the problem in a more meaningful way. Anyway, given the hard-crash nature it seems clear cut to me that it is a problem in DRI or Xorg that is just brought to light by the starwars screensaver. Presumably not only ubuntu users should be seeing it unless it's some long standing ubuntu divergence from upstream that is causing the issue; that seems unlikely though. I.O.W. should we not be taking this upstream? By the way, specific suggestions regarding 4) would be appreciated! ** Changed in: mesa (Ubuntu) Status: Invalid = Confirmed -- [radeon, savage] Starwars screensaver locks X https://bugs.launchpad.net/bugs/3198 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 153301] Re: weather applet won't use automatic-proxy-configuration
Perhaps it would make sense then for the gnome libs to provide an http access function that does understand the automatic settings? Or does it exist already, meaning that gweather-applet-2 needs to changed to make use of it? -- weather applet won't use automatic-proxy-configuration https://bugs.launchpad.net/bugs/153301 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 153301] weather applet won't use automatic-proxy-configuration
Public bug reported: Binary package hint: gnome-applets In gnome-network-preferences the proxy can be confgured as Direct internet connection (i.e. None), Manual proxy configuration where the host/port of the proxy server is specified and Automatic proxy configuration where an URL pointing to a .pac proxy configuration is specified. If Automatic proxy configuration is specified gweather-applet-2 ignores that setting and uses the information provided in Manual proxy configuration, even if it is disabled. To see this, 1) Change the manual proxy setting to point to an invalid proxy server and restart gweather-applet-2. Now the weather won't update 2) Activate a valid proxy configuration in Automatic proxy configuration and restart gweather-applet-2. The weather still won't update 3) Change the Manual configuration to point to a valid proxy server but do not activate it. Keep using the Automatic configuration and restart gweather-applet-2. Now the weather will update using the deactivated Manual proxy configuration rather than the activated automatic proxy. Note the restart of gweather-applet-2 at each step is required because of https://bugs.launchpad.net/ubuntu/+source/gnome-applets/+bug/49736 This is running up to date Feisty/AMD64 ** Affects: gnome-applets (Ubuntu) Importance: Undecided Status: New -- weather applet won't use automatic-proxy-configuration https://bugs.launchpad.net/bugs/153301 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 119078] Re: Excessive memory use with large images
Where can I get a feisty compatible build? I tried installing 2.10.4 from gutsy, but it had unmet dependencies. -- Excessive memory use with large images https://bugs.launchpad.net/bugs/119078 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 16724] Re: Inkscape does not use gnome print dialog
Any idea when this will hit a released version in Ubuntu? Feisty still has the old unfriendly printing dialog. -- Inkscape does not use gnome print dialog https://bugs.launchpad.net/bugs/16724 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 107025] Re: Multipage printing issue using even and odd.
I see this bug is still marked as need info. Peter Russel seems to describe the issue clearly, and I also just ran into the same issue trying to print a long document using pages per sheet = 2. I want to print on both sides of the paper using a printer that doesn't support duplex printing. Using the definitions as: Page: logical page as defined in the document Sheet: physical piece of paper as loaded in the printer If I have an 8 page document that I want to print using 2 sheets, I want: Pages per sheet: 2 Then selecting + Pages per sheet: 2 + Only print: Odd sheets I expect page 1 page 2 to be printed on sheet 1, page 5 6 to be printed on sheet2. Now I turn the sheets upside down and reload them in the printer, and select: + Pages per sheet: 2 + Only print: Even sheets I expect page 34 on sheet 1 and page 78 on sheet 2. Is there anything else that can be clarified? Please, I don't want rumours that Ubuntu users needlessly kill trees because of deficient two-sided printing support to start spreading ;-) Regards Neilen -- Multipage printing issue using even and odd. https://bugs.launchpad.net/bugs/107025 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 119078] Excessive memory use with large images
Public bug reported: Binary package hint: gthumb In a directory with several (13) large (~45MB, 1x14000px, 8bit grayscale) tiff files (scanned documents) gthumb soon uses excessive memory and makes the whole system unresponsive (about 30s after starting gthumb, 4 thumbnails displayed). This is on a fairly beefy machine (dual core AMD, 2GB memory) running Feisty AMD64. Memory use as reported by top: 25803 brick 18 0 2167m 1.1g 19m T0 54.4 0:45.31 gthumb that is ~2.1G virt, 1.1G res, 19mb shared after only 45 CPU seconds. ** Affects: gthumb (Ubuntu) Importance: Undecided Status: Unconfirmed -- Excessive memory use with large images https://bugs.launchpad.net/bugs/119078 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 119078] Re: Excessive memory use with large images
gThumb 2.10.2 -- Excessive memory use with large images https://bugs.launchpad.net/bugs/119078 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 58094] Re: Source out of date with upstream
Hi, ARPACK seems to be quite unclear about version numbers, I just looked at the file dates. A changelog can be found here: http://www.caam.rice.edu/software/ARPACK/SRC/Known_Problems The main archive, released in 1996 is here: http://www.caam.rice.edu/software/ARPACK/SRC/arpack96.tar.gz and the updated files here: http://www.caam.rice.edu/software/ARPACK/SRC/patch.tar.gz -- Source out of date with upstream https://bugs.launchpad.net/bugs/58094 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 49582] Re: PDF displays properley with evince/xpdf, prints/converts to PS with bad fonts/kerning
Hi, I run Gnome. Just tested on up to date Feisty, the problem persists! -- PDF displays properley with evince/xpdf, prints/converts to PS with bad fonts/kerning https://bugs.launchpad.net/bugs/49582 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 8764] Re: Disk doesn't show free space in 'filesystem'
Hmm, see this bug has been inactive for a long time. It seems more important than a priority low bug to me. I've been annoyed by it several times, almost always when trying to show off ubuntu to interested parties. I don't even use windows, yet I expect free space to be shown here ;) And I keep getting embarrassed over and over; I forget every time since in daily life I'm a command-line junky. -- Disk doesn't show free space in 'filesystem' https://bugs.launchpad.net/bugs/8764 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 8764] Re: Disk doesn't show free space in 'filesystem'
Actually, this is not quite the right bug I had in mind. I am really talking about https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/41262 -- Disk doesn't show free space in 'filesystem' https://bugs.launchpad.net/bugs/8764 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 109566] Re: firefox crashed
Hi, My firefox has stopped crashing on that site. The only significant change that I've made had been to remove a very old flash plugin that was in my ~/.mozilla which meant that ff was using flash 7 and not the newer flash 9. I was unaware of this old flash plugin lying around, I wonder how it ever got there ;P What confuses me though is that before it still crashed when using -safemode? Surely it should have disabled the flash plugin in that case? Anyway, I think this means we can close this bug. -- firefox crashed https://bugs.launchpad.net/bugs/109566 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 109566] Re: firefox crashed
hjmf: The problem is that firefox doesn't actually crash, it just hangs in an infinite loop, hence no crash report is created in /var/crash. Is there some way I can force-kill firefox such that a crash report created? -- firefox crashed https://bugs.launchpad.net/bugs/109566 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 109566] Re: firefox crashed
firefox -safe-mode exhibits the same behaviour. On a side note, I ran that while my existing firefox instance was active, and lost all my settings! Luckily I had backups, but this seems to be a bug? Should I try reproduce and report it? -- firefox crashed https://bugs.launchpad.net/bugs/109566 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 109566] FIrefox hangs with 100% CPU on a site
Public bug reported: Binary package hint: firefox This site makes firefox completely unresponsive while using 100% : http://www.google.com/search?q=m-audio+pro+keys+88ie=UTF8 This is up to date Feisty i386. ** Affects: firefox (Ubuntu) Importance: Undecided Status: Unconfirmed -- FIrefox hangs with 100% CPU on a site https://bugs.launchpad.net/bugs/109566 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 109566] Re: FIrefox hangs with 100% CPU on a site
Apologies, wrong URL: http://www.m-audio.com/products/en_us/ProKeys88-main.html -- FIrefox hangs with 100% CPU on a site https://bugs.launchpad.net/bugs/109566 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 109566] Re: firefox crashed
Hi. I tried by starting firefox in a fresh session, ie. firefox -ProfileManager in a terminal and created a new profile. The url still causes firefox to hang. I'm not sure how to get a crash report, since firefox doesn't actually crash, rather it becomes unresponsive and takes 100% CPU. Killing the process does not result in anything appearing in /var/crash. Does this URL not cause similar behaviour for anyone else? It could be the flash plugin causing trouble; is it possible to temporarily disable it without uninstalling? -- firefox crashed https://bugs.launchpad.net/bugs/109566 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 107207] padsp doesn't work with Audacity
Public bug reported: Binary package hint: pulseaudio Running up to date feisty i386 on an Athlon XP 1800+ with an add-in ES1371 PCI soundcard. PulseAudio is outputting to the sound-card through ALSA. I launch audacity like this: padsp audacity /usr/share/games/uqm/content/pkunk/insult01.wav but when I try to play the sound file, I get a dialogue box: Error while opening sound device. Please check the output device settings and the project sample rate In the terminal window I see: Expression 'ioctl( *odev, SNDCTL_DSP_SETTRIGGER, enableBits )' failed in 'src/hostapi/oss/pa_unix_oss.c', line: 819 Expression 'OpenDevices( idevName, odevName, idev, odev )' failed in 'src/hostapi/oss/pa_unix_oss.c', line: 857 Expression 'PaOssStream_Initialize( stream, inputParameters, outputParameters, streamCallback, userData, streamFlags, ossHostApi )' failed in 'src/hostapi/oss/pa_unix_oss.c', line: 1222 ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: Unconfirmed -- padsp doesn't work with Audacity https://bugs.launchpad.net/bugs/107207 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 104893] Re: gthumb unresponsive / unusably slow with RAW files in feisty
The problem I have is not that the thumbnail generation is slow, but that gthumb is unresponsive while this happens. A typical directory I work with in gthumb will have 100s of pictures/RAW files. Generating thumbnails for all takes 10's of minutes, during which time i can't really use gthumb. -- gthumb unresponsive / unusably slow with RAW files in feisty https://bugs.launchpad.net/bugs/104893 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 107217] Crop not applied in gthumb Fiesty
Public bug reported: Binary package hint: gthumb I view a picture, select crop from the Image menu, select a crop in the crop dialogue, click apply. The crop is not applied to the picture. The picture is completely unchanged. ** Affects: gthumb (Ubuntu) Importance: Undecided Status: Unconfirmed -- Crop not applied in gthumb Fiesty https://bugs.launchpad.net/bugs/107217 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 104893] gthumb unresponsive / unusably slow with RAW files in feisty
Public bug reported: Binary package hint: gthumb The Feisty version of gthumb seems to support raw files, but when I open a directory that contains a mix of .JPG and .NEF (Nikon RAW) files (my camera is set to record both raw and JPG versions of each picture), gthumb becomes unusably slow. I can disable the display of NEF files using a filter, but this has two problems: A) If NEF files are present the filter UI is unresponsive B) the space used by the filter UI prevents met from sizing the thumbnail view as I'd like it. It may be a bug, but when I turn off display of the file filter it also stops working. I'm running Feisty i386 on an old but not unreasonably slow PC (1GB memory, AMD AthlonXP @ 1.8GHz). ** Affects: gthumb (Ubuntu) Importance: Undecided Status: Unconfirmed -- gthumb unresponsive / unusably slow with RAW files in feisty https://bugs.launchpad.net/bugs/104893 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 72220] Re: python-biopython 1.41-2.1 hasn't built for AMD64
The reason I needed v1.41 is that the kd-tree component of biopython is not built for the ubuntu packages with the earlier versions. -- python-biopython 1.41-2.1 hasn't built for AMD64 https://launchpad.net/bugs/72220 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 75813] Error when using qmtest gui
Public bug reported: Tests run fine from the command line, but any test run from the qmtest webl GUI results in the following: func.fd.sph_webb2 Outcome Cause ERROR An exception occurred. Annotation Value qmtest.end_time 2006-12-14T20:36:56Z qmtest.exception exceptions.OSError: [Errno 3] No such process qmtest.start_time 2006-12-14T20:36:56Z qmtest.target local qmtest.traceback File /usr/lib/python2.4/site-packages/qm/test/target.py, line 225, in RunTest descriptor.Run(context, result) File /usr/lib/python2.4/site-packages/qm/test/database.py, line 256, in Run self._Execute(context, result, Run) File /usr/lib/python2.4/site-packages/qm/test/database.py, line 178, in _Execute methobj(context, result) File /usr/lib/python2.4/site-packages/qm/test/classes/command.py, line 397, in Run self.RunProgram(arguments[0], arguments, context, result) File /usr/lib/python2.4/site-packages/qm/test/classes/command.py, line 221, in RunProgram exit_status = e.Run(arguments, environment, path = program) File /usr/lib/python2.4/site-packages/qm/executable.py, line 548, in Run path) File /usr/lib/python2.4/site-packages/qm/executable.py, line 257, in Run child = self.Spawn(arguments, environment, dir, path, exception_pipe) File /usr/lib/python2.4/site-packages/qm/executable.py, line 209, in Spawn self._HandleChild() File /usr/lib/python2.4/site-packages/qm/executable.py, line 714, in _HandleChild super(RedirectedExecutable, self)._HandleChild() File /usr/lib/python2.4/site-packages/qm/executable.py, line 492, in _HandleChild os.setpgid(self.__monitor_pid, child_pid) Seems to be related to the kernel somehow according to this bug report: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=188578 I'm running Edgy on AMD64 ** Affects: qm (Ubuntu) Importance: Undecided Status: Unconfirmed -- Error when using qmtest gui https://launchpad.net/bugs/75813 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 72217] Re: Missing verify data after burning functionality.
Lack of verify is pretty much a deal breaker to me. It's a pity since gnomebaker seems like a very clean and well designed app. -- Missing verify data after burning functionality. https://launchpad.net/bugs/72217 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 4358] Re: Crashes when viewing demo database
seems to work just fine, i.e. no more crash -- Crashes when viewing demo database https://launchpad.net/bugs/4358 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3198] Re: [ati radeon] Starwars screensaver locks X
Hi I did some more testing. I ran the xscreensaver package from Hoary on my Edgy system with no crash. Hoary shipped xscreensaver v4.16. Breezy (the version where crashes started happening) ships xscreensaver v4.21. If you look at the xscreensaver changelog entry for v4.20 http://www.jwz.org/xscreensaver/changelog.html you will see: * starwars uses texture-mapped fonts now. It seems likely that this is what is causing the problem. What is strange is that no other GL screensavers cause a crash though. I would like to try and run a v4.20 or newer xscreensaver on a Hoary system to see if the xscreensaver update merely exposed a latent Xorg bug or if the Xorg crashing is also a newer bug. BTW, I see this bug is marked as need info. Is there any more info I can provide? I'm willing to run debug-testing code or whatever it takes on my machine to get to the bottom of this. -- [ati radeon] Starwars screensaver locks X https://launchpad.net/bugs/3198 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 29245] Re: Bug 3198 previously reported. When I click on any screensaver the application locks-up.
*** This bug is a duplicate of bug 3198 *** I'd say this is pretty clearly _not_ a dup of #3198 ... -- Bug 3198 previously reported. When I click on any screensaver the application locks-up. https://launchpad.net/bugs/29245 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 72220] python-biopython 1.41-2.1 hasn't built for AMD64
Public bug reported: See the build status page here: https://launchpad.net/distros/ubuntu/+source/python-biopython/1.41-2.1 ** Affects: python-biopython (Ubuntu) Importance: Undecided Status: Unconfirmed -- python-biopython 1.41-2.1 hasn't built for AMD64 https://launchpad.net/bugs/72220 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3198] Re: [ati radeon] Starwars screensaver locks X
Hi I've updated to Edgy now. The crash happens with both gnome-screensaver and plain x-. In fact, it will crash even if you just directly execute /usr/lib/xscreensaver/starwars and maximise the window. -- [ati radeon] Starwars screensaver locks X https://launchpad.net/bugs/3198 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 66386] Starting XMMS with double size on locks (crashes) system hard
Public bug reported: After upgrading to edgy, starting XMMS locked my system hard, requiring a hardware reset to reboot. I edited ~/.xmms/config to turn off the double size option, and it starts normally. If I enable double-size after starting xmms the display is currupted, but no crash. The hardware is an Athlon XP and an ATI Radeon RV200 QW [Radeon 7500] using the radeon module (II) Loading sub module radeon (II) LoadModule: radeon (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so I'm running up to date edgy. ** Affects: xmms (Ubuntu) Importance: Undecided Status: Unconfirmed -- Starting XMMS with double size on locks (crashes) system hard https://launchpad.net/bugs/66386 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 66386] Re: Starting XMMS with double size on locks (crashes) system hard
Seems to be related to https://launchpad.net/distros/ubuntu/+source/xmms/+bug/63144 although in #63114 no-one reported a hardware lock. The workaround: export XLIB_SKIP_ARGB_VISUALS=1 xmms also seems to fix the problem for me. -- Starting XMMS with double size on locks (crashes) system hard https://launchpad.net/bugs/66386 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 58123] Re: Openoffice.org writer incorrectly displays single line spacing as 1.5 line spacing in Dapper PPC
I see the same issue on Dapper i386 -- Openoffice.org writer incorrectly displays single line spacing as 1.5 line spacing in Dapper PPC https://launchpad.net/bugs/58123 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 58094] Source out of date with upstream
Public bug reported: Upstream seems to have updated their sources somewhere in 2002, while the source shipped with debian/ubuntu seems to date from 2001. This also seems to be true of debian unstable. ** Affects: arpack (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Source out of date with upstream https://launchpad.net/bugs/58094 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3667] Re: multipage (2 pages to 1) print function not working
OK, confirm that 2 to 1 printing works on a real printer (HP ColorLaserJet 3800 in this case), but does not work when printing to file. Should we expect 2 to 1 printing to work when printing to file? I've certainly wanted to do it before... -- multipage (2 pages to 1) print function not working https://launchpad.net/bugs/3667 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3667] Re: multipage (2 pages to 1) print function not working
Sorry for the multiple posts. Thomas: More specifically, what versions of evince and libgnomeprint are you using? -- multipage (2 pages to 1) print function not working https://launchpad.net/bugs/3667 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3667] Re: multipage (2 pages to 1) print function not working
Thomas: Latest dapper or edgy? Printing from evince to a .ps (can try on real printer at work tomorrow) still does not work. I do upgrade from dapper-updates, and my system is up to date. -- multipage (2 pages to 1) print function not working https://launchpad.net/bugs/3667 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3667] Re: multipage (2 pages to 1) print function not working
Sorry for the multiple posts. Thomas: More specifically, what versions of evince and libgnomeprint are you using? -- multipage (2 pages to 1) print function not working https://launchpad.net/bugs/3667 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3667] Re: multipage (2 pages to 1) print function not working
Oi, why are my comments being repeated? I don't think *I*'m doing anything wrong? Anyway, sorry for the annoyance. -- multipage (2 pages to 1) print function not working https://launchpad.net/bugs/3667 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3667] Re: multipage (2 pages to 1) print function not working
I have: $ LANG=en COLUMNS=150 dpkg -l *gnomeprint* | grep ^ii ii libgnomeprint2.2-0 2.12.1-3ubuntu2 The GNOME 2.2 print architecture - runtime files ii libgnomeprint2.2-data 2.12.1-3ubuntu2 The GNOME 2.2 print architecture - data files ii libgnomeprint2.2-dev2.12.1-3ubuntu2 The GNOME 2.2 print architecture - development files ii libgnomeprintui2.2-02.12.1-2ubuntu1 GNOME 2.2 print architecture User Interface - runtime files ii libgnomeprintui2.2-common 2.12.1-2ubuntu1 GNOME 2.2 print architecture User Interface - common files ii libgnomeprintui2.2-dev 2.12.1-2ubuntu1 GNOME 2.2 print architecture User Interface - devel files and ii evince 0.5.2-0ubuntu3 Document (postscript, pdf) viewer The print libraries seem to be the same as Thomas's. I tried printing to file with 2 to one and 4 to one settings enabled, with both evince and evolution, using the generic PS driver. The output is still only one page per page. I'll try with a real printer tomorrow, but I doubt that will change anything... -- multipage (2 pages to 1) print function not working https://launchpad.net/bugs/3667 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3667] Re: multipage (2 pages to 1) print function not working
I have: $ LANG=en COLUMNS=150 dpkg -l *gnomeprint* | grep ^ii ii libgnomeprint2.2-0 2.12.1-3ubuntu2 The GNOME 2.2 print architecture - runtime files ii libgnomeprint2.2-data 2.12.1-3ubuntu2 The GNOME 2.2 print architecture - data files ii libgnomeprint2.2-dev2.12.1-3ubuntu2 The GNOME 2.2 print architecture - development files ii libgnomeprintui2.2-02.12.1-2ubuntu1 GNOME 2.2 print architecture User Interface - runtime files ii libgnomeprintui2.2-common 2.12.1-2ubuntu1 GNOME 2.2 print architecture User Interface - common files ii libgnomeprintui2.2-dev 2.12.1-2ubuntu1 GNOME 2.2 print architecture User Interface - devel files and ii evince 0.5.2-0ubuntu3 Document (postscript, pdf) viewer The print libraries seem to be the same as Thomas's. I tried printing to file with 2 to one and 4 to one settings enabled, with both evince and evolution, using the generic PS driver. The output is still only one page per page. I'll try with a real printer tomorrow, but I doubt that will change anything... -- multipage (2 pages to 1) print function not working https://launchpad.net/bugs/3667 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3337] Re: cant drag a file to a folder in new nautilus location button bar
The bug linked upstream has been marked a duplicate of http://bugzilla.gnome.org/show_bug.cgi?id=309842, but I can't seem to figure out how to change the upsteam bug link. -- cant drag a file to a folder in new nautilus location button bar https://launchpad.net/bugs/3337 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
