[Bug 36413] Re: Drag-drop column ordering
^ Correction: Rhythmbox places Genre after Title, and before Artist, which is even worse. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/36413 Title: Drag-drop column ordering To manage notifications about this bug go to: https://bugs.launchpad.net/rhythmbox/+bug/36413/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 36413] Re: Drag-drop column ordering
16 years later and *still* no movement on this? Still an issue with Rhythmbox 3.4.4 in Ubuntu 22.04. I wouldn't even be worried if Genre *wasn't* stuck between Artist and Album, which was a strange choice. I did install Alternative Toolbar, and that allowed me to drag and drop in the order I liked, but it removed the status bar, which is too useful to be without, as it shows the total duration. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/36413 Title: Drag-drop column ordering To manage notifications about this bug go to: https://bugs.launchpad.net/rhythmbox/+bug/36413/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1773670] Re: Caja grays out in large directories
Can confirm this still happens in UM 20.04. And the folder doesn't have to be particularly large, and often happens when I copy files over to a portable HDD. The transfer is always successful, but all Caja windows hang for at least 30 secs. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1773670 Title: Caja grays out in large directories To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/caja/+bug/1773670/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1875441] Re: magnus automatically launched if installed on ubuntu 20.04
I installed ubuntu-mate-desktop last night and can confirm Magnus loads at startup in KDE, my usual desktop, even though there is no autostart entry for it. I would look into how to disable that in MATE, but unfortunately that DE is unusable, as outlined in the forum link below (in short, the 3 folders I have load in Caja at startup cause a loop of endlessly loading instances of those folders, whereas in KDE and Gnome I only get 3 folders): https://ubuntu-mate.community/t/ubuntu-mate-desktop-loads-hundreds-of- folders-after-install-keeps-going/24805/9 Since I can't find any mention of "magnus" in gsettings, I think the easiest way around this is to uninstall this app. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1875441 Title: magnus automatically launched if installed on ubuntu 20.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/magnus/+bug/1875441/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1698351] Re: Search in Nautilus Files does not allow sorting of results
Yep, this needs fixing. I upgraded from 16.04 to 20.04 LTS and while there have been some great improvements, what's changed in, and been removed from, Nautilus has been a huge disappointment. Search results are displayed in some crazed, random manner, and cannot be tailored, so when there are a lot of results, it's basically unusable. Because I use search so often, and in folders with lots of files, looks like I Have no choice but to use Nemo until this is resolved. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1698351 Title: Search in Nautilus Files does not allow sorting of results To manage notifications about this bug go to: https://bugs.launchpad.net/nautilus/+bug/1698351/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1635803] Re: dragging file with middle mouse button doesn't show "Copy/Move/Link" context menu
Upgraded from Ubuntu 16.04 to 20.04 with Nautilus/"Files" 3.36.3-stable and there is no middle-click drag context menu. I see this has been an issue for a while now, so I'm hoping this isn't *yet another* useful feature Nautilus/Gnome developers have taken out for reasons most of us can't fathom, but people are still looking at this as a bug, so I'm just confirming it is still an issue in 20.04.1 LTS. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1635803 Title: dragging file with middle mouse button doesn't show "Copy/Move/Link" context menu To manage notifications about this bug go to: https://bugs.launchpad.net/nautilus/+bug/1635803/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1767431] Re: restore type-ahead find, again
Hi. I finally upgraded to 18.04 and Nautilus without type-ahead find is extremely limiting when it comes to file/folder navigation. I can't even fathom why it would be dropped. But if search is now the default action for when one starts typing, there should be a way to disable that, or enable type-ahead find, if not in an easily-found, user-friendly way, then at least as an option in Preferences. I know there is a patched version available, but I'd rather not have upgrade headaches which can arise from having patched versions of major system apps, so am just adding my voice to the countless others on the web begging for action on this. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1767431 Title: restore type-ahead find, again To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1767431/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1575454] Re: Gedit didn't close after saving a new file
*** This bug is a duplicate of bug 1562486 *** https://bugs.launchpad.net/bugs/1562486 It also affects me on fresh install of Ubuntu 16.04, and persists after the most recent updates. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1575454 Title: Gedit didn't close after saving a new file To manage notifications about this bug go to: https://bugs.launchpad.net/gedit/+bug/1575454/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 887821] Re: "Show copy dialog" right click launcher entry doesn't work (on nautilus copy)
Happens to me on a fresh install of 16.04.1. The progress dialogue was there until I hit Show Desktop - no keyboard shortcuts bring it back - right-click launcher in Unity panel and "Show Copy Dialogue" does absolutely nothing - I do not have an arrow-in-folder app-indicator on the top panel - nothing listed here or and web pages I've looked at. The only way I know it is still copying is that in the Unity launcher there is a small progress-bar across it, and if I bring up Properties for the target folder I can briefly see the number of files increase. I really hoped this would have been fixed by now - this problem has plagued my brother since 12.04, and is one of the main reasons I ended up going KDE. But I figured I'd give Unity another shot on my new PC with a fresh install, and I'd really like to stick with it (but having no visible file operation progress basically kills it for me). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/887821 Title: "Show copy dialog" right click launcher entry doesn't work (on nautilus copy) To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/887821/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 1266964] Re: Rhythmbox 3.0 Can't Edit Recently Added Playlist (No Context Menu)
Yes, I now see those buttons, which I had overlooked probably thinking they were just column headings. I did not realise things had changed so much in 3.0. Many thanks for your assistance! Cheers. Frank On 01/12/2014 11:19 PM, fossfreedom wrote: > Actually this is not a bug: > > Click on the autoplaylist. Look at the playlist toolbar - Edit Browser > Viewall Playlist buttons. > > Click the Playlist button and click the Edit submenu. > > This will allow you to edit the playlist. > > ** Changed in: rhythmbox (Ubuntu) > Status: New => Invalid > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1266964 Title: Rhythmbox 3.0 Can't Edit Recently Added Playlist (No Context Menu) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/1266964/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1266964] [NEW] Rhythmbox 3.0 Can't Edit Recently Added Playlist (No Context Menu)
Public bug reported: Hi. In Ubuntu 13.10 I upgraded RB to version 3.0 via the fossfreedom PPA. Previously, when I right-clicked the "Recently Added" auto- playlist, a context menu would appear, from which I could choose "Edit", with which I could then adjust the time period that the playlist monitored for new music. Now I can't do that, as no context menu appears at all when right-clicking the playlist. Actually there is no context menu for clicking any playlist, and even when hiding all the playlists and right-clicking the blank area beneath the "Playlists" heading (which before would give me options like creating a new playlist). I've looked for ways around this, but no go, so assume it's a bug I needed to report. Cheers. ** Affects: rhythmbox (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1266964 Title: Rhythmbox 3.0 Can't Edit Recently Added Playlist (No Context Menu) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/1266964/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1164016] Re: restore type-ahead find
The removal of type-ahead find has been driving me nuts since its implementation, so I cast my vote that users be given the option to turn off automatic searching. It staggers me that rather than give us more options to customise our file manager to be as we like it, they're slowly being stripped away. And I have to say, I've been using Ubuntu since 2006, and I'm still waiting for a tool that lets me configure Nautilus without wading through gconf/dconf (though that would likely be next to useless with all the backwards steps Nautilus is taking with every release). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1164016 Title: restore type-ahead find To manage notifications about this bug go to: https://bugs.launchpad.net/nautilus/+bug/1164016/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1240336] Re: Not authorized to perform operation / Unable to determine the session we are in: No session for pid
Hi again. Solution #23 in comment #33 worked for me, so many thanks! For those who want to try it, here are the steps: gksu gedit /etc/pam.d/lightdm Under the first line "#%PAM-1.0" paste the following: session required pam_loginuid.so session required pam_systemd.so ... then log out and back in again. If need be, run "dpkg-reconfigure gdm" and select "lightdm" (that was already selected in my case, so I don't know if OKing it actually made any difference). You shouldn't need to reboot, but do so if a simple logout doesn't do the trick. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1240336 Title: Not authorized to perform operation / Unable to determine the session we are in: No session for pid To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm/+bug/1240336/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1240336] Re: Not authorized to perform operation / Unable to determine the session we are in: No session for pid
Hi. I can confirm after upgrading to 13.10, there isn't much that my system says I'm authorised to do! Can't use Software Updater unless I invoke it with sudo from the terminal... I'm apparently not authorised to access any of my removable drives, or even the other partitions on my internal drive... I am not even allowed to play a DVD! (And not sure if it is related, but in case it is, it seems Shutdown no longer works, and I have to use the PC's power button). It's all the same mess in Unity, Gnome Shell, Gnome Classic (my preferred desktop), and KDE/Kubuntu. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1240336 Title: Not authorized to perform operation / Unable to determine the session we are in: No session for pid To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm/+bug/1240336/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1173872] Re: Nautilus in 13.04 does not display available space
I just upgraded to 13.04 and this missing feature is driving me nuts. I think removing it for no apparent reason falls under "If it ain't broke, smash it to bits!"... -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1173872 Title: Nautilus in 13.04 does not display available space To manage notifications about this bug go to: https://bugs.launchpad.net/nautilus/+bug/1173872/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1059726] Re: Mounting drives that have '\040' in the name in fstab throws up an error during boot.
*** This bug is a duplicate of bug 1059471 *** https://bugs.launchpad.net/bugs/1059471 Pascal - the graphics card info is as follows: 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G84 [GeForce 8600 GT] [10de:0402] (rev a1) (prog-if 00 [VGA controller]) Forgive my lack of expertise in these matters, but I have no idea about blacklisting video cards, like why I would even need to do that (actually, to a novice like me it kind of sounds dangerous, hehe). Looking at the blacklist examples in /boot/grub/gfxblacklist.txt, I can't even see what part of the above info I'd have to put in. I assume this has something to do with why my boot utterly fails when it can't mount /media/Windows\040XP, rather than give me the option to skip and just resume boot. Once again, forgive my ignorance about why a mount failure and video card issue could be related. Anyway, all I can say is that while playing with the values in fstab and using mount -a to see if any changes work, everything I do still ends with the error: [mntent]: line 1 in /etc/fstab is bad Whether I use spaces, \040 instead of spaces, and quotes around the path of both of those or not, there is still no way for me to mount those with spaces. I know the short answer is just to change the mount points to those with no spaces, but the reason I have not done that is that I have so many links and bookmarks etc pointing to "Windows XP" - not to mention in a VirtualBox WinXP appliance where so much is tied to the physical WinXP partition - it would cause me too much hassle to change the mount point to "Windows_XP" (Ubuntu's automount recognises the partition's label of "Windows XP", and while I have to manually mount that, all my links/bookmarks then work, and I just have to remember to do that before loading my WinXP virtual machine, otherwise it too spits the dummy and fails to load). PS: my mountall version is now 2.42ubuntu0.4, but still no luck. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1059726 Title: Mounting drives that have '\040' in the name in fstab throws up an error during boot. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mountall/+bug/1059726/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 795239] Re: eject: unable to find or open device for: `cdrom' - but my cd is /dev/cdrom1
I get the same error after upgrading to Ubuntu 12.10. I actually found an eject package for Quantal (https://launchpad.net/ubuntu/quantal/amd64/eject), so figured it was an updated version of the command, but upon trying to install it I get "Error: no longer provides eject", so can't actually do anything with it. Just confirming that the eject command worked for years, until this upgrade. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/795239 Title: eject: unable to find or open device for: `cdrom' - but my cd is /dev/cdrom1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/eject/+bug/795239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1059726] Re: Mounting drives that have '\040' in the name in fstab throws up an error during boot.
Hi. I can confirm pretty much the same thing, being that my Windows XP partition could not be mounted on rebooting after the 12.10 upgrade, and it totally halted the system (I was given no "Press S to skip" option - the only keys that would do anything was Esc [toggle between showing Plymouth and verbose mode] and Ctrl+Alt+Del [reboot]). Nothing is wrong with that NTFS partition, but the mount point does contain a space (/media/Windows XP), so it may be the "\040" issue. I booted with another drive and edited fstab (I simply commented out the whole line, as I had no idea if it was an issue with it mounting NTSF volumes or what not), and the system started fine (and the NTFS partition, being on the same drive as Ubuntu, was automatically mounted anyway). Once upon an upgrade, I had to actually edit fstab and replace the spaces with "\040" in order to get affected volumes to be mounted again - now it seems that's the very cause of this issue. While I obviously got past this, this issue would surely stump those with less experience, especially as many would have no idea how to boot with a Live CD or other Ubuntu drive and successfully edit fstab (keeping in mind Ubuntu won't automatically mount another Ubuntu/Linux system partition, so you'd have to know how to do this manually, then edit fstab as root). Also, it doesn't help that among the error messages it mentions nothing of spaces in the mount point, but states: "The volume may already be mounted, or another software may use it..." "mountall: File system could not be mounted /media/Windows XP" -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1059726 Title: Mounting drives that have '\040' in the name in fstab throws up an error during boot. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mountall/+bug/1059726/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 986990] Re: Totem full screen is not so full in ubuntu 12.04
Hi. I can confirm that after upgrading to Ubuntu 12.04, using Gnome 3 Classic/Fallback, that while I've gotten Compiz back with this version, many programs that attempt to go fullscreen don't quite get there. For example, with EOG (Eye Of Gnome Image Viewer), the image will fill the screen until I hit the arrow key to go to the next image, where upon "fullscreen" becomes the area between the top and bottom Gnome panels (often, if I wait a few seconds, I don't even have to move on to the next image - it will just resize itself). I actually filed a bug report for EOG, but since then have observed this with Totem, SMPlayer, and a few others. I just tried it with Firefox, but it seems fine. I can confirm this does not happen when I switch back to Metacity. I've tried disabling a few Compiz plugins/features to try and isolate which one is causing this, to no avail. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/986990 Title: Totem full screen is not so full in ubuntu 12.04 To manage notifications about this bug go to: https://bugs.launchpad.net/compiz/+bug/986990/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 808512] Re: No way to configure screensaver in Oneiric
Not being able to choose a screensaver is something I've never come across in my 18 years on the PC, hehe. I thought the settings were just hidden on upgrade to Ubuntu 11.10, but after extensive Googling, I've only seen out of date info on using gnome-screensaver-preferences (which no longer seems to exist, or should I say doesn't exist yet for Gnome 3). Seen some complicated guides on how to migrate xscreensaver files, but that won't help me pick any in the new default screensaver. Hopefully this lack of foresight will be rectified soon. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/808512 Title: No way to configure screensaver in Oneiric To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/808512/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 843751] Re: Oneiric lacks screensaver configuration tool
*** This bug is a duplicate of bug 808512 *** https://bugs.launchpad.net/bugs/808512 Just confirming that on upgrade to Ubuntu 11.10 and Gnome 3, gnome- screensaver has replaced xscreensaver on my system, which wouldn't worry me except that for the life of me I can't find any info on how to change any settings, even pick a screensaver rather than have the monitor go on stand-by. All the info I've seen is out of date, so gnome-screensaver- preferences does not exist. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/843751 Title: Oneiric lacks screensaver configuration tool To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-screensaver/+bug/843751/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 676793] Re: Need to Double-Click ISO Images TWICE Before Brasero Opens to Burn to Disc
Well, if I had something to report in the last 60 days, I would have. I can say that the record is now 9 times before the burn dialogue would pop up, so definitely not getting any better! System updated/upgraded, but still persists in a major way - there is not one single time the dialogue has appeared on a single double-click. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/676793 Title: Need to Double-Click ISO Images TWICE Before Brasero Opens to Burn to Disc To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/676793/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 739300] Re: Alt+Tab doesn't work when Dash is open
OK, seems a Compiz setting was disabled by default, and enabling it gave me back Alt+Tab; however, something is preventing me setting the other familiar shortcut, Alt+Esc. Here is as much info as possible, including the fact that 2 settings seem to be identical, even though they should behave differently: Go to CompizConfig Settings Manager > Window Management, and enable Static Application Switcher; if that doesn't work, click on that plugin, and set the desired "binding" to Alt+Tab in the Bindings tab. It should work once you've enabled that plugin, though, but if you click on it to see its settings, don't be surprised that the keyboard shortcut for "Next window" is Tab, even though it is actually "Next window (All windows)" (which is probably set to Tab) which pops up the window list. Setting "Next window" to Escape will not automatically move you between open windows, as you'd expect, but seems to do nothing; yet, if you set it back to Tab, it will once again show you all open windows (as will Tab). So I got Alt+Tab back, but I actually use Alt+Esc more, so wouldn't mind getting that fixed now! Cheers -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/739300 Title: Alt+Tab doesn't work when Dash is open To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/739300/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 739300] Re: Alt+Tab doesn't work when Dash is open
Alt+Tab unfortunately does nothing for me in Unity (same with Alt+Esc). I've desperately searched for a task selector indicator or something, but currently the only way to switch between (maximised) tasks is using the Dash menu. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/739300 Title: Alt+Tab doesn't work when Dash is open To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/739300/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 676793] Re: Need to Double-Click ISO Images TWICE Before Brasero Opens to Burn to Disc
Hi. Sorry, but there hasn't been anything to report, except that it has persisted after my upgrade to 11.04. What's more, I currently have my brother's PC here, and after upgrading from 9.10 through to 11.04, I can tell you now his system does exactly the same! And I can verify it wasn't doing this before, not just because he never reported such behaviour, but because I had burned Ubuntu Alternate discs for the upgrades from there myself. Now it's like my system: more often than not, it will fail to open the burning dialogue, even though in the taskbar I am told it is opening said app. One last thing I can report is that it has taken as many as 4 double-clicks to get it going, each time a status button appearing telling me it will open. And in case you're wondering, right-clicking and choosing the option manually from the context menu is no better. Still quite annoying! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/676793 Title: Need to Double-Click ISO Images TWICE Before Brasero Opens to Burn to Disc To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/676793/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 783926] Re: Drag-Drop works only on --replace (ubuntu-classic session)
Yes, I have the same problem here, being if I want to drag and drop items from one folder to another that isn't visible, by holding it over the corresponding taskbar button till the folder appears, all I get is the + sign, and if I let go, a launcher to the file or folder is created. This is using the Classic desktop in 11.04, and is the same with Thunar. Thanks for the compiz --replace tip, as that rectified it (I assume until the next reboot). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/783926 Title: Drag-Drop works only on --replace (ubuntu-classic session) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 676793] [NEW] Need to Double-Click ISO Images TWICE Before Brasero Opens to Burn to Disc
Public bug reported: Binary package hint: brasero Ubuntu 10.10 using Brasero 2.32.0-0ubuntu2 Before upgrade to 10.10, ISO images only needed to be double-clicked once for Brasero's "Burn to Disc" to appear. After upgrade to 10.10, double-clicking an ISO image results in the cursor showing "busy", and in the taskbar a button appears saying it is "Opening...", but after quite a few seconds of this, nothing appears after the taskbar button vanishes. Double-clicking the ISO a second time finally achieves the desired outcome. Additional info: The only other thing I can think of to mention, though I doubt it has anything to do with this, is that after the upgrade Brasero kept (apparently) creating image checksums (though I couldn't find any evidence it was doing more than wasting time). I went into Edit > Plugins and disabled both the File Checksums and Image Checksums plugins. I'm not actually sure if the behaviour above was from the start (after the upgrade) or after disabling the plugins (since I only burned an image or two before looking for how to disable the annoying checksum creation). ** Affects: brasero (Ubuntu) Importance: Undecided Status: New -- Need to Double-Click ISO Images TWICE Before Brasero Opens to Burn to Disc https://bugs.launchpad.net/bugs/676793 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 527267] Re: Application Indicators too wide
It's not a "bug", but a rather silly design flaw. Saw at least one person standing up for it an even managing to justify it, but for the rest of us, we prefer it "cramped", and not have space needlessly wasted like that. -- Application Indicators too wide https://bugs.launchpad.net/bugs/527267 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 543366] Re: vuze wont start
*** This bug is a duplicate of bug 558672 *** https://bugs.launchpad.net/bugs/558672 Hey kingu, thanks for that fix! All I was getting was a short burst of hard drive activity since upgrading to 10.04. Tried a quick reinstall to no avail, so many thanks once again. Now I'm happily downloading that film clip of a favourite band that finally has some seeders! Cheers -- vuze wont start https://bugs.launchpad.net/bugs/543366 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 490205] Re: Empty Disc Recognised, but still Asks for Empty DVD upon Burn
I had to install a new disc drive as the previous one started having read errors (was burning absolutely fine, but would come up with non- existent errors when doing an md5 check), and finally K3b's Burn dialogue could recognise I had inserted a blank disc. Not sure if this was actually because of KDE updates or the upgrade for Ubuntu I did just before this, especially since this error started before the drive started being less than perfect. -- Empty Disc Recognised, but still Asks for Empty DVD upon Burn https://bugs.launchpad.net/bugs/490205 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 490205] Re: Empty Disc Recognised, but still Asks for Empty DVD upon Burn
cp: cannot stat `/home/ozzman/.kde/share/config/kdebugrc': No such file or directory The file didn't exist, so ran kdebugdialog and it was then created. After starting K3b I got an "Error - K3b" popup with "The file or folder /media/cdrom0/VIDEO_TS does not exist." which I've not had before. But it runs the same as before, with the empty disc showing in the main window, but not in the Burn dialogue. ** Attachment added: "k3b_debug.txt" http://launchpadlibrarian.net/36733055/k3b_debug.txt -- Empty Disc Recognised, but still Asks for Empty DVD upon Burn https://bugs.launchpad.net/bugs/490205 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 490205] Re: Empty Disc Recognised, but still Asks for Empty DVD upon Burn
Unfortunately, "AUTO" is now the only option in the dropdown menu of choices. It wasn't like that before - I know, because I seldom use "AUTO", since it isn't always "DAO" (which is what I generally want). And my problem isn't with the burning modes (though I'll try anything, if it can help), but the fact that the Burn dialogue can't see the empty disc, even though the main window of K3b can. And I'm not trying to burn an .iso to disc, but files to video disc. If you mean the other way round, I don't doubt I can burn the video DVD project to an .iso, but I'd rather get this sorted and save half the work (ie: burn straight to disc). -- Empty Disc Recognised, but still Asks for Empty DVD upon Burn https://bugs.launchpad.net/bugs/490205 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 490205] Re: Empty Disc Recognised, but still Asks for Empty DVD upon Burn
I thought I'd add the "Media Info" on the disc that appears in the right pane, just so there isn't any question that K3b can in fact see the disc, and knows it is an empty DVD: Medium Type: DVD-R Sequential Media ID: CMC MAG. AM3 Capacity: 510:38:38 min (4.4 GiB) Rewritable: no Appendable: no Empty: yes Layers: 1 Sessions: 0 Supported writing speeds: 4.0x (5540 KB/s) 8.0x (11080 KB/s) 10.0x (13850 KB/s) 12.0x (16620 KB/s) 16.0x (22160 KB/s) -- Empty Disc Recognised, but still Asks for Empty DVD upon Burn https://bugs.launchpad.net/bugs/490205 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 490205] Re: Empty Disc Recognised, but still Asks for Empty DVD upon Burn
Hi. Just rebooted, and nothing has changed; the main window shows the disc present as soon as the system has mounted it, but the Burn dialogue still says "Please insert an emply DVD-DL medium". I think this may have been the first time I've used K3b since I upgraded Ubuntu to 9.10; I have KDE and Xfce installed along with Gnome, so a lot of KDE apps were replaced with Karmic versions in the upgrade. I've used K3b without issue for ages now (well, besides that 4Gb limit issue many others had too), and have recommended this over Gnome apps due to the reliable Video DVD burning (ie: they're actually playable). Hopefully this gets resolved soon, as even though I have NeroLinux, I much prefer K3b. Although I haven't tried it, I'm assuming if I wanted to create an .iso image of the video DVD project, it would let me (since the Start button is not disabled like the Burn one is). Seems purely to be that the dialogue cannot see the disc, even though the main body of the program can. Weird. -- Empty Disc Recognised, but still Asks for Empty DVD upon Burn https://bugs.launchpad.net/bugs/490205 You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to k3b in ubuntu. -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 490205] Re: Empty Disc Recognised, but still Asks for Empty DVD upon Burn
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/36248985/Dependencies.txt ** Attachment added: "ProcMaps.txt" http://launchpadlibrarian.net/36248986/ProcMaps.txt ** Attachment added: "ProcStatus.txt" http://launchpadlibrarian.net/36248987/ProcStatus.txt ** Attachment added: "XsessionErrors.txt" http://launchpadlibrarian.net/36248988/XsessionErrors.txt -- Empty Disc Recognised, but still Asks for Empty DVD upon Burn https://bugs.launchpad.net/bugs/490205 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 490205] [NEW] Empty Disc Recognised, but still Asks for Empty DVD upon Burn
Public bug reported: Binary package hint: k3b Ubuntu 9.10 "amd64" running K3b 1.68.0~alpha3-0ubuntu1 I have used this program countless times to make playable video DVDs, but this time the Burn button was disabled in the final dialogue box. In the folder pane, it shows that I have an empty DVD in there, and in the status bar shows me I have 3Mb of space left on it. I can use the Burn button to bring up the dialogue, but it shows that I need to insert a blank medium, even though it already knows I have one in there. I cannot do anything but hit Cancel, since the Burn button is disabled because apparently there is no disc in the drive. I've restarted the program a few times, to no avail. I'll see if a reboot does anything. Cheers ProblemType: Bug Architecture: amd64 Date: Mon Nov 30 15:06:31 2009 DistroRelease: Ubuntu 9.10 ExecutablePath: /usr/bin/k3b NonfreeKernelModules: nvidia Package: k3b 1.68.0~alpha3-0ubuntu1 ProcEnviron: SHELL=/bin/bash LANG=en_AU.UTF-8 ProcVersionSignature: Ubuntu 2.6.31-14.48-generic SourcePackage: k3b Uname: Linux 2.6.31-14-generic x86_64 ** Affects: k3b (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug -- Empty Disc Recognised, but still Asks for Empty DVD upon Burn https://bugs.launchpad.net/bugs/490205 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 116650] Re: Imation Disc Stakka C10AI goes wild when connected to PC
Hi. Just confirming that in Intrepid the Disc Stakka still just cycles through the discs endlessly. I've tried a few of the "fixes" in forums to at least stop the carousel from rotating the whole time, to no avail (and this is over the last few versions of Ubuntu). I know it is asking a bit to actually have support in Ubuntu for this unit, but a way to disconnect/disable it would at least mean people wouldn't have to physically disconnect the USB cable each time they boot into Ubuntu to stop this annoying behaviour. None of the ways of stopping Ubuntu from seeing it as an attached USB device have worked for me. -- Imation Disc Stakka C10AI goes wild when connected to PC https://bugs.launchpad.net/bugs/116650 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 306128] Re: easymp3gain: Cannot access Vorbisgain, even though it is installed and works.
$ cat ~/.easyMP3Gain | grep "Vorbis" VorbisGainBackend=vorbisgain Version is 0.36-3ubuntu1 (intrepid). Version of easyMP3gain is 0.4.2.-beta, and I believe I got it from there, as it wasn't available in the repositories (if I recall correctly). Vorbisgain I am pretty sure I just got via Synaptic. And yes, vorbisgain seems to run fine from a terminal. And no, adding the path to the command in Options just gives the same error, but with the path included (ie: "Error: Cannot start /usr/bin/vorbisgain. Install..."). Should also mention this happened on my friend's PC first, as I was trying to show him how to edit his .ogg collection. I have .mp3s, so hadn't encountered this of course, but when I then tried on my PC, I couldn't edit .ogg/.oga files either (with the mp3gain UI that is). -- easymp3gain: Cannot access Vorbisgain, even though it is installed and works. https://bugs.launchpad.net/bugs/306128 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 306128] [NEW] easymp3gain: Cannot access Vorbisgain, even though it is installed and works.
Public bug reported: Binary package hint: mp3gain Program: easymp3gain 0.4.2 beta OK, I am thinking this is an Ubuntu-specific bug, as I have seen other Ubuntu users with the same problem, while others out there on other distros are using easymp3gain to adjust the volume of ogg/oga files just fine. When I try to adjust an ogg or oga file, it comes up with: "Error: Cannot start vorbisgain. Install..." ... and that's all I can see in the status bar, but I am assuming it is telling me to install vorbisgain, which is in fact installed, and can be accessed via terminal no problems whatsoever. If anyone knows a fix or workaround, please let me know, as this is a really handy little program. ** Affects: mp3gain (Ubuntu) Importance: Undecided Status: New -- easymp3gain: Cannot access Vorbisgain, even though it is installed and works. https://bugs.launchpad.net/bugs/306128 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 155368] Re: Downloader for X adds /'s to the link making it fail
I've posted the above as a bug, and has info related to this thread there (https://bugs.launchpad.net/ubuntu/+source/d4x/+bug/305915), since to get around the new bug I reinstalled the buggy d4x. Sure enough, I could add downloads from offending urls but the problem was naturally back. HOWEVER, while the urls look wrong, they are actually downloading fine! -- Downloader for X adds /'s to the link making it fail https://bugs.launchpad.net/bugs/155368 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 305915] Re: d4x can't handle certain (numeric) urls (does not add them to list/queue)
I decided to let Update Manager give me the "update" for d4x... even though I knew it actually would be installing the earlier version with the // bug. Anyway, offending numeric urls now work, but as I suspected, it's back to putting too many // in the urls. BUT instead of the urls failing, they're actually working even though they are obviously not right to look at! (for now...) -- d4x can't handle certain (numeric) urls (does not add them to list/queue) https://bugs.launchpad.net/bugs/305915 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 305915] Re: d4x can't handle certain (numeric) urls (does not add them to list/queue)
Perhaps I should also add I had the extra /// problem https://bugs.launchpad.net/ubuntu/+source/d4x/+bug/155368 and used the amd64 version of the installer someone had reworked to fix that bug (d4x_2.5.7.1-5_amd64.deb). That bug totally rendered d4x useless. -- d4x can't handle certain (numeric) urls (does not add them to list/queue) https://bugs.launchpad.net/bugs/305915 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 305915] Re: d4x can't handle certain (numeric) urls (does not add them to list/queue)
PS: I run Ubuntu 8.10 and d4x 2.5.7.1 -- d4x can't handle certain (numeric) urls (does not add them to list/queue) https://bugs.launchpad.net/bugs/305915 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 305915] [NEW] d4x can't handle certain (numeric) urls (does not add them to list/queue)
Public bug reported: Binary package hint: d4x Hi. I don't think this is a dupe of https://bugs.launchpad.net/ubuntu/+source/d4x/+bug/268913 ("d4x cannot handle urls that contain ~ and some other characters allowed by HTTP") with fix instructions http://launchpadlibrarian.net/17531907/locstr.cc.diff I am not sure how to implement anyway. My problem is that all of a sudden it wasn't adding urls at all, but admittedly it was from one site and the urls are numeric like http://174.36.1.2/progex.7z. I tried a "normal" download link with words instead of numbers and it was added fine. But I just came across another bug while copying the url that I just pasted - up popped the box to add a download as usual, so I thought I'd OK it to see if it was successfully added after adding the download via a "normal" url, and now the queue is empty again! Another thing I should report is that at the top of the left pane under "Main" the number of downloads keeps increasing with each one I add, but will be reset to zero on the next program restart. I can confirm it isn't like I just can't see them as most of the options in the Download menu are inactive (just like if the list was empty). And as I said, now trying to add one of those urls results in the whole list being wiped. I hadn't actually started the download I added successfully before it was wiped, and this may have made a difference, as when this started I still had one unfinished download and it wasn't wiped but finished successfully. I can also report that restarting the program finds the list empty of those added successfully after trying to add ones like http://174.36.1.2/progex.7z the previous time. That's about it I think. If the fix mentioned at the top is the answer (or needs to be edited to include numerical values) any help would be appreciated. ** Affects: d4x (Ubuntu) Importance: Undecided Status: New -- d4x can't handle certain (numeric) urls (does not add them to list/queue) https://bugs.launchpad.net/bugs/305915 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 155368] Re: Downloader for X adds /'s to the link making it fail
Eek! Now it's just not adding downloads to the list/queue! Funny thing is at the top of the small left hand pane titled "Main" the number goes up from zero each time I add one, but nothing shows up. The number also increases if I keep adding the same one, and since there is nothing actually in the list, after a restart it's back to zero. Didn't have any problems with the last download, but adding them is now impossible. I will look around for a similar bug report. -- Downloader for X adds /'s to the link making it fail https://bugs.launchpad.net/bugs/155368 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 155368] Re: Downloader for X adds /'s to the link making it fail
Yes, I've had the same problem with / in addresses, and had no answer to emails, and the site is down, so looks like d4x is a lost cause (for future releases/development). I rather liked it but am now back to Kget (which is buggy now that is a KDE4 app, but at least it works!). Wouldn't be so bad if you could SUCCESSFULLY edit the urls manually, but there is ALWAYS at least one extra / which makes the link useless. For me, uninstalling and reinstalling did nothing but waste my time (I see one or two of you had success with that). However, now that I have uninstalled it and reinstalled it via the packages above, all seems fine (a download actually starting is a sure sign, hehe!). Thanks for the guys who did the job of the developer and fixed this (there are some real clever little buggers out there, aren't there?!) and for making the 64-bit version. I don't so much care if this app never has another new release, as long as this one keeps working, hehe. But that said, I do second the motion to get another similar app developed, and one whose author(s) can be contacted! -- Downloader for X adds /'s to the link making it fail https://bugs.launchpad.net/bugs/155368 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 155368] Re: Downloader for X adds /'s to the link making it fail
Yes, I've had the same problem with / in addresses, and had no answer to emails, and the site is down, so looks like d4x is a lost cause (for future releases/development). I rather liked it but am now back to Kget (which is buggy now that is a KDE4 app, but at least it works!). Wouldn't be so bad if you could SUCCESSFULLY edit the urls manually, but there is ALWAYS at least one extra / which makes the link useless. For me, uninstalling and reinstalling did nothing but waste my time (I see one or two of you had success with that). However, now that I have uninstalled it and reinstalled it via the packages above, all seems fine (a download actually starting is a sure sign, hehe!). Thanks for the guys who did the job of the developer and fixed this (there are some real clever little buggers out there, aren't there?!) and for making the 64-bit version. I don't so much care if this app never has another new release, as long as this one keeps working, hehe. But that said, I do second the motion to get another similar app developed, and one whose author(s) can be contacted! -- Downloader for X adds /'s to the link making it fail https://bugs.launchpad.net/bugs/155368 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 301321] Re: 8.10 has Killed my CD Printing on Canon MP800
I've enabled error logging so will upload that info next time I print. -- 8.10 has Killed my CD Printing on Canon MP800 https://bugs.launchpad.net/bugs/301321 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 301321] Re: 8.10 has Killed my CD Printing on Canon MP800
$ lsmod | grep usb usb_storage92864 0 libusual 31784 1 usb_storage usblp 22784 0 usbhid 39776 0 hid59072 1 usbhid scsi_mod 183160 6 usb_storage,sbp2,sr_mod,sd_mod,sg,libata usbcore 175376 7 usb_storage,libusual,usblp,usbhid,ehci_hcd,uhci_hcd $ tail -f /var/log/messages Nov 24 02:54:31 ubuntu666 kernel: [ 7181.042131] scsi10 : SCSI emulation for USB Mass Storage devices Nov 24 02:54:36 ubuntu666 kernel: [ 7186.042065] scsi 10:0:0:0: Direct-Access CanonMP800Storage 0106 PQ: 0 ANSI: 2 Nov 24 02:54:36 ubuntu666 kernel: [ 7186.050630] sd 10:0:0:0: [sdb] Attached SCSI removable disk Nov 24 02:54:36 ubuntu666 kernel: [ 7186.052409] sd 10:0:0:0: Attached scsi generic sg2 type 0 Nov 24 02:55:46 ubuntu666 kernel: [ 7255.563809] atl1 :02:00.0: eth0 link is down Nov 24 02:55:47 ubuntu666 kernel: [ 7257.096737] atl1 :02:00.0: eth0 link is up 100 Mbps full duplex Nov 24 02:55:52 ubuntu666 kernel: [ 7262.357789] atl1 :02:00.0: eth0 link is down Nov 24 02:55:54 ubuntu666 kernel: [ 7263.875452] usb 4-1: USB disconnect, address 8 Nov 24 02:55:54 ubuntu666 kernel: [ 7263.879057] usblp0: removed Nov 24 02:55:54 ubuntu666 kernel: [ 7263.902236] atl1 :02:00.0: eth0 link is up 100 Mbps full duplex Nov 24 02:56:25 ubuntu666 kernel: [ 7295.328762] usb 4-6: reset high speed USB device using ehci_hcd and address 4 Nov 24 02:56:26 ubuntu666 kernel: [ 7295.741292] usb 4-6.1: reset full speed USB device using ehci_hcd and address 5 Nov 24 02:56:27 ubuntu666 kernel: [ 7296.841509] usb 4-2: new high speed USB device using ehci_hcd and address 9 Nov 24 02:56:27 ubuntu666 kernel: [ 7296.975746] usb 4-2: configuration #1 chosen from 1 choice Nov 24 02:56:27 ubuntu666 kernel: [ 7296.984798] usblp0: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid 0x04A9 pid 0x170D Nov 24 02:56:27 ubuntu666 kernel: [ 7296.985057] scsi11 : SCSI emulation for USB Mass Storage devices Nov 24 02:56:32 ubuntu666 kernel: [ 7301.985645] scsi 11:0:0:0: Direct-Access CanonMP800Storage 0106 PQ: 0 ANSI: 2 Nov 24 02:56:32 ubuntu666 kernel: [ 7301.992067] sd 11:0:0:0: [sdb] Attached SCSI removable disk Nov 24 02:56:32 ubuntu666 kernel: [ 7301.993853] sd 11:0:0:0: Attached scsi generic sg2 type 0 $ lpinfo -v network socket network beh direct hal:///org/freedesktop/Hal/devices/usb_device_4a9_170d_228F43_if1_printer_noserial direct usb://Canon/MP800 file cups-pdf:/ direct scsi network smb -- 8.10 has Killed my CD Printing on Canon MP800 https://bugs.launchpad.net/bugs/301321 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 301324] [NEW] 8.10 has Killed my CD Printing on Canon MP800
*** This bug is a duplicate of bug 301321 *** https://bugs.launchpad.net/bugs/301321 Public bug reported: The Intrepid upgrade wanted to replace my cupsd.conf and I let it (though backed it up first). However, printing is out of whack now, even with the TurboPrint driver for the Canon Pixma MP800 (which isn't that well supported under Ubuntu). I've only tried CD printing (with tried- and-tested PDFs I had created when gLabels started refusing to print before 8.10), and have played around with settings, copied over the old cupsd.conf and rebooted, reinstalled TurboPrint, but printing CDs results in it printing about 1cm or so too high up, so the top is cut off... that's if I print from Evince... if I use Okular (which is based on the now defunct KPDF, which worked best for me before 8.10) it prints part of it on the right side, and a tiny bit of it at the top (quite messed up!). If I use the generic (non-TurboPrint) driver, it lines up the disc but prints nothing. I really wouldn't mind being able to print again in Ubuntu, hehe. ** Affects: ubuntu Importance: Undecided Status: New -- 8.10 has Killed my CD Printing on Canon MP800 https://bugs.launchpad.net/bugs/301324 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 301321] [NEW] 8.10 has Killed my CD Printing on Canon MP800
Public bug reported: The Intrepid upgrade wanted to replace my cupsd.conf and I let it (though backed it up first). However, printing is out of whack now, even with the TurboPrint driver for the Canon Pixma MP800 (which isn't that well supported under Ubuntu). I've only tried CD printing (with tried- and-tested PDFs I had created when gLabels started refusing to print before 8.10), and have played around with settings, copied over the old cupsd.conf and rebooted, reinstalled TurboPrint, but printing CDs results in it printing about 1cm or so too high up, so the top is cut off... that's if I print from Evince... if I use Okular (which is based on the now defunct KPDF, which worked best for me before 8.10) it prints part of it on the right side, and a tiny bit of it at the top (quite messed up!). If I use the generic (non-TurboPrint) driver, it lines up the disc but prints nothing. I really wouldn't mind being able to print again in Ubuntu, hehe. ** Affects: ubuntu Importance: Undecided Status: New -- 8.10 has Killed my CD Printing on Canon MP800 https://bugs.launchpad.net/bugs/301321 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 278121] Re: [Intrepid] Upgrade to intrepid presents user with CUPS config file diff
Yes... I thought letting it update as recommended would be fine, but is screwed up my disc printing. THANKS!!! Luckily I backed up cupsd.conf, so will see if it's better after a reboot. But the 2 files look alien to each other, like done in different encoding or whatever. -- [Intrepid] Upgrade to intrepid presents user with CUPS config file diff https://bugs.launchpad.net/bugs/278121 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 154528] Re: [gutsy] ati driver not working in gutsy
My problem with the generic ati driver after upgrading to Gutsy is the screen going absolutely haywire from login onwards. So I can't see a thing, or should I say I can see plenty but of course can't make sense of a display rapidly moving in diagonal lines. I have had to revert to the old vesa driver too (and yeah, I have the same card and have never been able to get anything but a basic driver to work, but at least ati used to work!). Here are some links to posts by me and others with ATI vs Gutsy woes: http://ubuntuforums.org/showthread.php?t=582357 http://ubuntuforums.org/showthread.php?p=3600411#post3600411 -- [gutsy] ati driver not working in gutsy https://bugs.launchpad.net/bugs/154528 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs