[Bug 1768625] Re: Bluetooth headset HSP/HFP mode not working in Bionic
*** This bug is a duplicate of bug 1576559 *** https://bugs.launchpad.net/bugs/1576559 Same with a Bose Noise Canceling 700. Have the profile but nothing shows up on the list of capture devices. Device 60:AB:D2:02:00:B4 (public) Name: Bose NC 700 HP Alias: Bose NC 700 HP Paired: yes Trusted: yes Blocked: no Connected: yes LegacyPairing: no UUID: Vendor specific (-deca-fade-deca-deafdecacaff) UUID: Serial Port (1101--1000-8000-00805f9b34fb) UUID: Headset (1108--1000-8000-00805f9b34fb) UUID: Audio Sink(110b--1000-8000-00805f9b34fb) UUID: A/V Remote Control Target (110c--1000-8000-00805f9b34fb) UUID: A/V Remote Control(110e--1000-8000-00805f9b34fb) UUID: Handsfree (111e--1000-8000-00805f9b34fb) UUID: Phonebook Access Server (112f--1000-8000-00805f9b34fb) UUID: PnP Information (1200--1000-8000-00805f9b34fb) UUID: Vendor specific (81c2e72a-0591-443e-a1ff-05f988593351) UUID: Vendor specific (931c7e8a-540f-4686-b798-e8df0a2ad9f7) UUID: Vendor specific (f8d1fbe4-7966-4334-8024-ff96c9330e15) Modalias: bluetooth:v009Ep4024d1211 ManufacturerData Key: 0x0f03 ManufacturerData Value: c2 12 8c c8 86 2f 04 73 ./.s ServiceData Key: fe2c--1000-8000-00805f9b34fb ServiceData Value: 84 c3 1b ... -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1768625 Title: Bluetooth headset HSP/HFP mode not working in Bionic To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1768625/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1671858] [NEW] package snapd 2.0.10 failed to install/upgrade: subprocess new pre-removal script returned error exit status 5
Public bug reported: Fresh install on VM - update - upgrade, then software update - reboot - this error. ProblemType: Package DistroRelease: Ubuntu 16.04 Package: snapd 2.0.10 ProcVersionSignature: Ubuntu 4.4.0-66.87-generic 4.4.44 Uname: Linux 4.4.0-66-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 Date: Fri Mar 10 10:28:27 2017 ErrorMessage: subprocess new pre-removal script returned error exit status 5 InstallationDate: Installed on 2017-03-09 (0 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) RelatedPackageVersions: dpkg 1.18.4ubuntu1.1 apt 1.2.19 SourcePackage: snapd Title: package snapd 2.0.10 failed to install/upgrade: subprocess new pre-removal script returned error exit status 5 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: snapd (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1671858 Title: package snapd 2.0.10 failed to install/upgrade: subprocess new pre- removal script returned error exit status 5 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/snapd/+bug/1671858/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1656034] [NEW] package doc-base 0.10.7 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2
Public bug reported: Rebooted, this error popped up, recently upgraded perl and uninstalled apache2 ProblemType: Package DistroRelease: Ubuntu 16.10 Package: doc-base 0.10.7 ProcVersionSignature: Ubuntu 4.8.0-34.36-generic 4.8.11 Uname: Linux 4.8.0-34-generic x86_64 ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 Date: Thu Jan 12 11:46:51 2017 ErrorMessage: subprocess installed post-installation script returned error exit status 2 InstallationDate: Installed on 2016-12-14 (29 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) PackageArchitecture: all RelatedPackageVersions: dpkg 1.18.10ubuntu1 apt 1.3.3 SourcePackage: doc-base Title: package doc-base 0.10.7 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2 UpgradeStatus: Upgraded to yakkety on 2016-12-14 (29 days ago) ** Affects: doc-base (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package yakkety -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1656034 Title: package doc-base 0.10.7 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/doc-base/+bug/1656034/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1652691] [NEW] package virtualbox-ext-pack (not installed) failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: Originally I had installed the ext-pack and all was fine. I rebooted the machine and this error popped up. ProblemType: Package DistroRelease: Ubuntu 16.10 Package: virtualbox-ext-pack (not installed) ProcVersionSignature: Ubuntu 4.8.0-32.34-generic 4.8.11 Uname: Linux 4.8.0-32-generic x86_64 ApportVersion: 2.20.3-0ubuntu8.2 AptOrdering: virtualbox-ext-pack:amd64: Install NULL: ConfigurePending Architecture: amd64 Date: Sun Dec 25 03:03:12 2016 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationDate: Installed on 2016-12-14 (12 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) RelatedPackageVersions: dpkg 1.18.10ubuntu1 apt 1.3.3 SourcePackage: virtualbox-ext-pack Title: package virtualbox-ext-pack (not installed) failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: Upgraded to yakkety on 2016-12-14 (12 days ago) ** Affects: virtualbox-ext-pack (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package need-duplicate-check yakkety -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1652691 Title: package virtualbox-ext-pack (not installed) failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/virtualbox-ext-pack/+bug/1652691/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1652490] Re: package sahara-common 1:5.0.0-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Setting up sahara-common (1:5.0.0-1) ... PKG-Openstack now calling: dbc_go sahara-common configure dbconfig-common: writing config to /etc/dbconfig-common/sahara-common.conf creating database saharadb: already exists. INFO [alembic.runtime.migration] Context impl SQLiteImpl. INFO [alembic.runtime.migration] Will assume non-transactional DDL. INFO [alembic.runtime.migration] Running upgrade 006 -> 007, convert clusters.status_description to LongText Traceback (most recent call last): File "/usr/bin/sahara-db-manage", line 10, in sys.exit(main()) File "/usr/lib/python2.7/dist-packages/sahara/db/migration/cli.py", line 109, in main CONF.command.func(config, CONF.command.name) File "/usr/lib/python2.7/dist-packages/sahara/db/migration/cli.py", line 49, in do_upgrade_downgrade do_alembic_command(config, cmd, revision, sql=CONF.command.sql) File "/usr/lib/python2.7/dist-packages/sahara/db/migration/cli.py", line 30, in do_alembic_command getattr(alembic_cmd, cmd)(config, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/alembic/command.py", line 174, in upgrade script.run_env() File "/usr/lib/python2.7/dist-packages/alembic/script/base.py", line 407, in run_env util.load_python_file(self.dir, 'env.py') File "/usr/lib/python2.7/dist-packages/alembic/util/pyfiles.py", line 93, in load_python_file module = load_module_py(module_id, path) File "/usr/lib/python2.7/dist-packages/alembic/util/compat.py", line 79, in load_module_py mod = imp.load_source(module_id, path, fp) File "/usr/lib/python2.7/dist-packages/sahara/db/migration/alembic_migrations/env.py", line 95, in run_migrations_online() File "/usr/lib/python2.7/dist-packages/sahara/db/migration/alembic_migrations/env.py", line 88, in run_migrations_online context.run_migrations() File "", line 8, in run_migrations File "/usr/lib/python2.7/dist-packages/alembic/runtime/environment.py", line 797, in run_migrations self.get_context().run_migrations(**kw) File "/usr/lib/python2.7/dist-packages/alembic/runtime/migration.py", line 312, in run_migrations step.migration_fn(**kw) File "/usr/lib/python2.7/dist-packages/sahara/db/migration/alembic_migrations/versions/007_increase_status_description_size.py", line 36, in upgrade existing_server_default=None) File "", line 8, in alter_column File "", line 3, in alter_column File "/usr/lib/python2.7/dist-packages/alembic/operations/ops.py", line 1414, in alter_column return operations.invoke(alt) File "/usr/lib/python2.7/dist-packages/alembic/operations/base.py", line 318, in invoke return fn(self, operation) File "/usr/lib/python2.7/dist-packages/alembic/operations/toimpl.py", line 53, in alter_column **operation.kw File "/usr/lib/python2.7/dist-packages/alembic/ddl/impl.py", line 160, in alter_column existing_nullable=existing_nullable, File "/usr/lib/python2.7/dist-packages/alembic/ddl/impl.py", line 118, in _exec return conn.execute(construct, *multiparams, **params) File "/usr/lib/python2.7/dist-packages/sqlalchemy/engine/base.py", line 914, in execute return meth(self, multiparams, params) File "/usr/lib/python2.7/dist-packages/sqlalchemy/sql/ddl.py", line 68, in _execute_on_connection return connection._execute_ddl(self, multiparams, params) File "/usr/lib/python2.7/dist-packages/sqlalchemy/engine/base.py", line 968, in _execute_ddl compiled File "/usr/lib/python2.7/dist-packages/sqlalchemy/engine/base.py", line 1146, in _execute_context context) File "/usr/lib/python2.7/dist-packages/sqlalchemy/engine/base.py", line 1341, in _handle_dbapi_exception exc_info File "/usr/lib/python2.7/dist-packages/sqlalchemy/util/compat.py", line 202, in raise_from_cause reraise(type(exception), exception, tb=exc_tb, cause=cause) File "/usr/lib/python2.7/dist-packages/sqlalchemy/engine/base.py", line 1139, in _execute_context context) File "/usr/lib/python2.7/dist-packages/sqlalchemy/engine/default.py", line 450, in do_execute cursor.execute(statement, parameters) sqlalchemy.exc.OperationalError: (sqlite3.OperationalError) near "ALTER": syntax error [SQL: u'ALTER TABLE clusters ALTER COLUMN status_description TYPE TEXT'] dpkg: error processing package sahara-common (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of sahara-engine: sahara-engine depends on sahara-common (= 1:5.0.0-1); however: Package sahara-common is not configured yet. dpkg: error processing package sahara-engine (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of sahara-api: sahara-api depends on sahara-common (= 1:5.0.0-1); however: Package sahara-common is not configured yet. dpkg: error processing package sahara-api (--configure): dependency problems - leaving unconfigured No apport report written because the
[Bug 1652490] Re: package sahara-common 1:5.0.0-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
sudo apt-get remove sahara-common The following packages will be REMOVED: sahara-api sahara-common sahara-engine 0 upgraded, 0 newly installed, 3 to remove and 0 not upgraded. 3 not fully installed or removed. After this operation, 333 kB disk space will be freed. Do you want to continue? [Y/n] (Reading database ... 316227 files and directories currently installed.) Removing sahara-api (1:5.0.0-1) ... Removing sahara-engine (1:5.0.0-1) ... Removing sahara-common (1:5.0.0-1) ... -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1652490 Title: package sahara-common 1:5.0.0-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/sahara/+bug/1652490/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1652490] [NEW] package sahara-common 1:5.0.0-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: Tried to install sahara, and it failed. ProblemType: Package DistroRelease: Ubuntu 16.10 Package: sahara-common 1:5.0.0-1 ProcVersionSignature: Ubuntu 4.8.0-32.34-generic 4.8.11 Uname: Linux 4.8.0-32-generic x86_64 ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 Date: Sat Dec 24 22:47:19 2016 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationDate: Installed on 2016-12-14 (11 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) PackageArchitecture: all RelatedPackageVersions: dpkg 1.18.10ubuntu1 apt 1.3.3 SourcePackage: sahara Title: package sahara-common 1:5.0.0-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: Upgraded to yakkety on 2016-12-14 (10 days ago) ** Affects: sahara (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package need-duplicate-check yakkety -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1652490 Title: package sahara-common 1:5.0.0-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/sahara/+bug/1652490/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1596672] [NEW] package kaccounts-providers (not installed) failed to install/upgrade: trying to overwrite '/etc/signon-ui/webkit-options.d/www.facebook.com.conf', which is also in package account
*** This bug is a duplicate of bug 1591378 *** https://bugs.launchpad.net/bugs/1591378 Public bug reported: Errors were encountered while processing: /var/cache/apt/archives/kde-config-telepathy-accounts_4%3a15.12.3-0ubuntu1_amd64.deb /var/cache/apt/archives/kaccounts-providers_4%3a15.12.3-0ubuntu1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) ProblemType: Package DistroRelease: Ubuntu 16.04 Package: kaccounts-providers (not installed) ProcVersionSignature: Ubuntu 4.4.0-24.43-generic 4.4.10 Uname: Linux 4.4.0-24-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 Date: Mon Jun 27 11:41:50 2016 DuplicateSignature: package:kaccounts-providers:(not installed) Unpacking kde-config-telepathy-accounts (4:15.12.3-0ubuntu1) ... dpkg: error processing archive /var/cache/apt/archives/kde-config-telepathy-accounts_4%3a15.12.3-0ubuntu1_amd64.deb (--unpack): trying to overwrite '/usr/share/accounts/services/google-im.service', which is also in package account-plugin-google 0.12+16.04.20160126-0ubuntu1 ErrorMessage: trying to overwrite '/etc/signon-ui/webkit-options.d/www.facebook.com.conf', which is also in package account-plugin-facebook 0.12+16.04.20160126-0ubuntu1 InstallationDate: Installed on 2016-06-27 (0 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) RelatedPackageVersions: dpkg 1.18.4ubuntu1.1 apt 1.2.12~ubuntu16.04.1 SourcePackage: kaccounts-providers Title: package kaccounts-providers (not installed) failed to install/upgrade: trying to overwrite '/etc/signon-ui/webkit-options.d/www.facebook.com.conf', which is also in package account-plugin-facebook 0.12+16.04.20160126-0ubuntu1 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: kaccounts-providers (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package package-conflict xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1596672 Title: package kaccounts-providers (not installed) failed to install/upgrade: trying to overwrite '/etc/signon-ui/webkit- options.d/www.facebook.com.conf', which is also in package account- plugin-facebook 0.12+16.04.20160126-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/kaccounts-providers/+bug/1596672/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1033598] Re: the CAPTCHA challenge in Ubuntu Software Center is much too difficult to solve for a real human being
Seriously. . . I have already registered with Ubuntu One . . . the captcha challenge is horrible. I tried and tried over and over, but it is just unreasonable. There are a wide variety of options better then this one, please do something to change this!! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1033598 Title: the CAPTCHA challenge in Ubuntu Software Center is much too difficult to solve for a real human being To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1033598/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1532467] [NEW] package fglrx-core (not installed) failed to install/upgrade: trying to overwrite '/usr/bin/clinfo', which is also in package clinfo 2.0.15.04.28-1
Public bug reported: This is a several day issue. Fresh ubuntu install, installed boinc. Boinc does not see ati card. System sees card. Forums full of different suggestions. Every suggestion crashes. . . ProblemType: Package DistroRelease: Ubuntu 15.10 Package: fglrx-core (not installed) ProcVersionSignature: Ubuntu 4.2.0-23.28-generic 4.2.6 Uname: Linux 4.2.0-23-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.19.1-0ubuntu5 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Sat Jan 9 13:09:43 2016 DistUpgraded: Fresh install DistroCodename: wily DistroVariant: ubuntu DkmsStatus: virtualbox, 5.0.10, 4.2.0-16-generic, x86_64: installed virtualbox, 5.0.10, 4.2.0-23-generic, x86_64: installed virtualbox-guest, 5.0.10, 4.2.0-16-generic, x86_64: installed virtualbox-guest, 5.0.10, 4.2.0-23-generic, x86_64: installed DuplicateSignature: package:fglrx-core:(not installed):trying to overwrite '/usr/bin/clinfo', which is also in package clinfo 2.0.15.04.28-1 ErrorMessage: trying to overwrite '/usr/bin/clinfo', which is also in package clinfo 2.0.15.04.28-1 GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] RS880 [Radeon HD 4200] [1002:9710] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:83a2] Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4850] [1002:9442] (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:21c0] InstallationDate: Installed on 2016-01-08 (1 days ago) InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) MachineType: System manufacturer System Product Name ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-23-generic root=UUID=f0d95b17-f3b0-418b-a3b5-b6e46a3a0a3f ro quiet splash vt.handoff=7 RelatedPackageVersions: dpkg 1.18.2ubuntu5.1 apt 1.0.10.2ubuntu1 SourcePackage: fglrx-installer Title: package fglrx-core (not installed) failed to install/upgrade: trying to overwrite '/usr/bin/clinfo', which is also in package clinfo 2.0.15.04.28-1 UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/20/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1101 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: M4A785-M dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1101:bd11/20/2012:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM4A785-M:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.12.2+15.10.20151015-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.64-1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.0.2-1ubuntu4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.0.2-1ubuntu4 version.xserver-xorg-core: xserver-xorg-core 2:1.17.2-1ubuntu9.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.2-1ubuntu1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0+git20150819-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20150808-0ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu3 xserver.bootTime: Sat Jan 9 09:49:31 2016 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputPower Button KEYBOARD, id 7 inputLogitech M510MOUSE, id 8 inputLogitech K350KEYBOARD, id 9 xserver.errors: RADEON(G0): [XvMC] Failed to initialize extension. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.17.2-1ubuntu9.1 xserver.video_driver: radeon ** Affects: fglrx-installer (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package compiz-0.9 need-duplicate-check package-conflict ubuntu wily -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1532467 Title: package fglrx-core (not installed) failed to install/upgrade: trying to overwrite '/usr/bin/clinfo', which is also in package clinfo 2.0.15.04.28-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1532467/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1369265] [NEW] 14.04 tkdesk does not start due to failed dependencies. Apparently fixed in development version 2.0-9.2 for upcoming 14.10. But cannot leave LTS version totally broken!?
Public bug reported: Xubuntu 14.04.1 tkdesk does not start Failed dependency: Looking for libBLT.2.4.so.8.5 but only has libBLT.2.4.so.8.6 ** Affects: tkdesk (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1369265 Title: 14.04 tkdesk does not start due to failed dependencies. Apparently fixed in development version 2.0-9.2 for upcoming 14.10. But cannot leave LTS version totally broken!? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/tkdesk/+bug/1369265/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1166171] [NEW] Random lockups
Public bug reported: MSI H61M_P31(G3) mobo, Driver for Intel Integrated Graphics Random lockups at least every few days. Mouse/keyboard ignored. No response to ssh on wired network. Last Xorg.0.log ends: /var/lib/xkb/server-D7D71B388B2C7FE139492B8952A9E555752EC018.xkm (EE) [mi] EQ overflowing. Additional events will be discarded until existing events are processed. (EE) (EE) Backtrace: (EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x7f605c1d8b76] (EE) 1: /usr/bin/X (mieqEnqueue+0x26b) [0x7f605c1b9f5b] (EE) 2: /usr/bin/X (0x7f605c03+0x6a4d2) [0x7f605c09a4d2] (EE) 3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f6056f09000+0x5f34) [0x7f6056f0ef34] (EE) 4: /usr/bin/X (0x7f605c03+0x93707) [0x7f605c0c3707] (EE) 5: /usr/bin/X (0x7f605c03+0xbcee8) [0x7f605c0ecee8] (EE) 6: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f605b356000+0xfcb0) [0x7f605b365cb0] (EE) 7: /lib/x86_64-linux-gnu/libc.so.6 (ioctl+0x7) [0x7f605a0a6527] (EE) 8: /usr/lib/x86_64-linux-gnu/libdrm.so.2 (drmIoctl+0x28) [0x7f605b14d328] (EE) 9: /usr/lib/x86_64-linux-gnu/libdrm.so.2 (drmCommandNone+0x16) [0x7f605b14f6a6] (EE) 10: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f6058d46000+0x170e5) [0x7f6058d5d0e5] (EE) 11: /usr/bin/X (0x7f605c03+0xe52c8) [0x7f605c1152c8] (EE) 12: /usr/bin/X (BlockHandler+0x44) [0x7f605c089c34] (EE) 13: /usr/bin/X (WaitForSomething+0x114) [0x7f605c1d5f24] (EE) 14: /usr/bin/X (0x7f605c03+0x557e1) [0x7f605c0857e1] (EE) 15: /usr/bin/X (0x7f605c03+0x4456a) [0x7f605c07456a] (EE) 16: /lib/x86_64-linux-g That's it! ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: xorg 1:7.7+1ubuntu4 ProcVersionSignature: Ubuntu 3.5.0-26.42-generic 3.5.7.6 Uname: Linux 3.5.0-26-generic x86_64 ApportVersion: 2.6.1-0ubuntu10 Architecture: amd64 Date: Mon Apr 8 12:48:59 2013 InstallationDate: Installed on 2012-10-05 (184 days ago) InstallationMedia: Xubuntu 12.04.1 LTS Precise Pangolin - Release amd64 (20120817.3) MarkForUpload: True SourcePackage: xorg UpgradeStatus: Upgraded to quantal on 2013-03-06 (32 days ago) ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug quantal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1166171 Title: Random lockups To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1166171/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 902368] [NEW] gmt-coastline-download tries to download non-existant file
Public bug reported: The /usr/sbin/gmt-coastline-download script tries to download high or full coastline data from a URL it generates on line 139-40: URL_HIGH=$SITE/GSHHS${VERSION}_high.tar.bz2 URL_FULL=$SITE/GSHHS${VERSION}_full.tar.bz2 These URLs no longer work on most of the supported GMT mirrors, including the one chosen by default by the script. Of all the mirrors listed, only the washington.edu and u-tokai.ac.jp ones include the relevant files. The minimal change is probably to change the default to use one of these two mirrors. A proper fix should take into account the fact that since (I think) version GSHHS 2.2.0, the file name has not been capitalised and doesn't have a _high or _full suffix. Usual details: richard@nevis:~$ lsb_release -rd Description:Ubuntu 11.10 Release:11.10 richard@nevis:~$ apt-cache policy gmt-coast-low gmt-coast-low: Installed: 1:2.1.1-1 Candidate: 1:2.1.1-1 Version table: *** 1:2.1.1-1 0 500 http://de.archive.ubuntu.com/ubuntu/ oneiric/universe i386 Packages 500 http://gb.archive.ubuntu.com/ubuntu/ oneiric/universe i386 Packages 100 /var/lib/dpkg/status ** Affects: gmt-coast-low (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/902368 Title: gmt-coastline-download tries to download non-existant file To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gmt-coast-low/+bug/902368/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 366835] Re: in 9.04 for AMD64, nedit will not copy to clipboard
@Paul Gevers: OK I will do that. BTW The X crash reported in #38 probably wasn't caused by the nedit/lesstif/Xorg problem. I had the same behaviour without nedit running, and I had music playing every time the crash occurred - it looks like pulseaudio may be causing it. Sorry about the noise. -- in 9.04 for AMD64, nedit will not copy to clipboard https://bugs.launchpad.net/bugs/366835 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 332631] Re: pulseaudio errors, sound/audio bugs
Ubuntu 10.04 Lucid AMD64, Nvidia video driver, NVIDIA GeForce4 MX 440 AGP 8x This has happened a few times: User1 on F8 console User2 on F9 console User2 playing streamed music in Firefox Switch to User1 on F8 Music stops playing After around 30 sec: Screen blanks Drum roll Login screen, on F9 The previous X session on F9 has crashed out, all the work on open windows gone. I found the following log messages, but ultimately perhaps it is Xorg or nvidia that should take responsibility for the X session crash? /var/log/messages: Aug 27 11:19:51 joseph pulseaudio[26567]: pid.c: Stale PID file, overwriting. Aug 27 11:19:52 joseph pulseaudio[26567]: main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /tmp/dbus-T203Jnz5Q3: Connection refused Aug 27 11:19:54 joseph pulseaudio[26624]: alsa-mixer.c: Your kernel driver is broken: it reports a volume range from 0.00 dB to 0.00 dB which makes no sense. Aug 27 11:20:59 joseph pulseaudio[26624]: last message repeated 2 times -- pulseaudio errors, sound/audio bugs https://bugs.launchpad.net/bugs/332631 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 625264] [NEW] mouse pointer trapped in a window
Public bug reported: Problems using nedit in Ubuntu 10.04 AMD64 Nedit works OK at first, then starts to malfunction. Copy-paste by highlighting and middle-mouse click, or by menu, starts failing to work within the same window. Meanwhile, copy-pasting from elsewhere (eg xterm window) DOES work. On another tab, everything seems normal. Today I tried to close down the offending tab by right clicking on it. The result was that the mouse pointer was trapped within the tabs bar. All I could do then was CNRTL-ALT F1 to do a text login and kill nedit. In fact the X session on console F7 crashed before I managed to kill nedit, but that may be related to pulseaudio because I was playing music at the time. Log message: Aug 24 15:23:24 joseph kernel: [443474.418222] nedit[9190]: segfault at 2 ip 7fee622493d9 sp 7fff731f81e0 error 4 in libXm.so.2.0.1[7fee6219+163000] A static build of an older nedit with motif has the same problem with a right-click on tabs with 10.04. Not a problem with 8.04. The right-click on a tab problems is reported separately as a bug in lesstif, but appears to be an Xorg problem. See: https://bugzilla.redhat.com/show_bug.cgi?id=543647 Looks like Redhat have a patch for this particular bug in Fedora, but judging by reversions there, it has not been fixed upstream in Xorg. ** Affects: libx11 (Ubuntu) Importance: Undecided Status: New -- mouse pointer trapped in a window https://bugs.launchpad.net/bugs/625264 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 625264] Re: mouse pointer trapped in a window
Xorg log follows lspci-vvnn output is: 00:00.0 Host bridge [0600]: nVidia Corporation nForce3 250Gb Host Bridge [10de:00e1] (rev a1) Subsystem: ASRock Incorporation Device [1849:00e1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Region 0: Memory at ignored (32-bit, prefetchable) Capabilities: access denied Kernel driver in use: agpgart-amd64 00:01.0 ISA bridge [0601]: nVidia Corporation nForce3 250Gb LPC Bridge [10de:00e0] (rev a2) Subsystem: ASRock Incorporation Device [1849:00e0] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 00:01.1 SMBus [0c05]: nVidia Corporation nForce 250Gb PCI System Management [10de:00e4] (rev a1) Subsystem: ASRock Incorporation Device [1849:00e4] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at 5080 [size=32] Region 4: I/O ports at 5000 [size=64] Region 5: I/O ports at 5040 [size=64] Capabilities: access denied Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:02.0 USB Controller [0c03]: nVidia Corporation CK8S USB Controller [10de:00e7] (rev a1) (prog-if 10) Subsystem: ASRock Incorporation Device [1849:00e7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at fcffd000 (32-bit, non-prefetchable) [size=4K] Capabilities: access denied Kernel driver in use: ohci_hcd 00:02.1 USB Controller [0c03]: nVidia Corporation CK8S USB Controller [10de:00e7] (rev a1) (prog-if 10) Subsystem: ASRock Incorporation Device [1849:00e7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at fcffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: access denied Kernel driver in use: ohci_hcd 00:02.2 USB Controller [0c03]: nVidia Corporation nForce3 EHCI USB 2.0 Controller [10de:00e8] (rev a2) (prog-if 20) Subsystem: ASRock Incorporation Device [1849:00e8] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin C routed to IRQ 21 Region 0: Memory at fcfffc00 (32-bit, non-prefetchable) [size=256] Capabilities: access denied Kernel driver in use: ehci_hcd 00:05.0 Bridge [0680]: nVidia Corporation CK8S Ethernet Controller [10de:00df] (rev a2) Subsystem: ASRock Incorporation Device [1849:00df] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at fcffc000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at ec00 [size=8] Capabilities: access denied Kernel driver in use: forcedeth Kernel modules: forcedeth 00:08.0 IDE interface [0101]: nVidia Corporation CK8S Parallel ATA Controller (v2.5) [10de:00e5] (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: ASRock Incorporation Device [1849:00e5] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 01f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 03f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 0170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 0370 (type 3, non-prefetchable) [disabled] [size=1]
[Bug 453493] Re: [Acer AOA150] hibernate/resume failure
After dist upgrade on 20/10/09, same problem. But this time I had many messages Failed to mount one or more of mount points listed in /etc/fstab. Something new every day! Not sure if any of this helps, but I keep getting the automatic bug reports, so I pass it back. -- [Acer AOA150] hibernate/resume failure https://bugs.launchpad.net/bugs/453493 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 453493] Re: [Acer AOA150] hibernate/resume failure
After dist upgrade on 18/10/09 resume after hibernate apparently completes, but is indistinguishable from a restart. Desktop state forgotten. -- [Acer AOA150] hibernate/resume failure https://bugs.launchpad.net/bugs/453493 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 453493] [NEW] [Acer AOA150] hibernate/resume failure
Public bug reported: Karmic NBR beta with updates to 15/10/09 chromium-browser running, wireless connection. Hibernate apparently succeeded, but took a long time. On re-starting, ran through bios, grub and login. Then showed the spotlight splash screen but without horizontal progress bar, and stuck like that. Mouse pointer responding, but no response to clicks or keyboard. Had to power off with power button. Bug report produced after re-start. Automatic bug report sent ProblemType: KernelOops Annotation: This occured during a previous hibernate and prevented it from resuming properly. AplayDevices: List of PLAYBACK Hardware Devices card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: richard1887 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0x5854 irq 16' Mixer name : 'Realtek ALC268' Components : 'HDA:10ec0268,1025015b,00100101' Controls : 9 Simple ctrls : 6 Date: Fri Oct 16 21:42:08 2009 DistroRelease: Ubuntu 9.10 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume InterpreterPath: /usr/bin/python2.6 MachineType: Acer AOA150 Package: linux-image-2.6.31-14-generic 2.6.31-14.47 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=e9aef09c-7bf1-4f12-a801-b0d2c04b40d6 ro quiet splash ProcCmdline: /usr/bin/python /usr/share/apport/apportcheckresume ProcEnviron: PATH=(custom, no user) ProcVersionSignature: Ubuntu 2.6.31-14.47-generic RelatedPackageVersions: linux-backports-modules-2.6.31-14-generic N/A linux-firmware 1.23 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Tags: resume hibernate ubuntu-unr Title: [Acer AOA150] hibernate/resume failure Uname: Linux 2.6.31-14-generic i686 UserGroups: dmi.bios.date: 10/06/2008 dmi.bios.vendor: Acer dmi.bios.version: v0.3309 dmi.board.asset.tag: Base Board Asset Tag dmi.board.vendor: Acer dmi.board.version: Base Board Version dmi.chassis.type: 1 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAcer:bvrv0.3309:bd10/06/2008:svnAcer:pnAOA150:pvr1:rvnAcer:rn:rvrBaseBoardVersion:cvnChassisManufacturer:ct1:cvrChassisVersion: dmi.product.name: AOA150 dmi.product.version: 1 dmi.sys.vendor: Acer ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-kerneloops hibernate i386 resume ubuntu-unr -- [Acer AOA150] hibernate/resume failure https://bugs.launchpad.net/bugs/453493 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 453493] Re: [Acer AOA150] hibernate/resume failure
** Attachment added: AlsaDevices.txt http://launchpadlibrarian.net/33801339/AlsaDevices.txt ** Attachment added: BootDmesg.txt http://launchpadlibrarian.net/33801340/BootDmesg.txt ** Attachment added: Card0.Amixer.values.txt http://launchpadlibrarian.net/33801341/Card0.Amixer.values.txt ** Attachment added: Card0.Codecs.codec.0.txt http://launchpadlibrarian.net/33801342/Card0.Codecs.codec.0.txt ** Attachment added: CurrentDmesg.txt http://launchpadlibrarian.net/33801343/CurrentDmesg.txt ** Attachment added: Dependencies.txt http://launchpadlibrarian.net/33801344/Dependencies.txt ** Attachment added: IwConfig.txt http://launchpadlibrarian.net/33801345/IwConfig.txt ** Attachment added: Lspci.txt http://launchpadlibrarian.net/33801346/Lspci.txt ** Attachment added: Lsusb.txt http://launchpadlibrarian.net/33801347/Lsusb.txt ** Attachment added: PciMultimedia.txt http://launchpadlibrarian.net/33801348/PciMultimedia.txt ** Attachment added: ProcCpuinfo.txt http://launchpadlibrarian.net/33801349/ProcCpuinfo.txt ** Attachment added: ProcInterrupts.txt http://launchpadlibrarian.net/33801350/ProcInterrupts.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/33801351/ProcMaps.txt ** Attachment added: ProcModules.txt http://launchpadlibrarian.net/33801352/ProcModules.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/33801353/ProcStatus.txt ** Attachment added: SleepLog.txt http://launchpadlibrarian.net/33801354/SleepLog.txt ** Attachment added: UdevDb.txt http://launchpadlibrarian.net/33801355/UdevDb.txt ** Attachment added: UdevLog.txt http://launchpadlibrarian.net/33801356/UdevLog.txt ** Attachment added: WifiSyslog.txt http://launchpadlibrarian.net/33801357/WifiSyslog.txt -- [Acer AOA150] hibernate/resume failure https://bugs.launchpad.net/bugs/453493 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 453493] Re: [Acer AOA150] hibernate/resume failure
Note that home directory was encrypted -- [Acer AOA150] hibernate/resume failure https://bugs.launchpad.net/bugs/453493 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 453493] Re: [Acer AOA150] hibernate/resume failure
Suspend/resume works ok under same conditions -- [Acer AOA150] hibernate/resume failure https://bugs.launchpad.net/bugs/453493 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 357705] [NEW] fglrx No devices detected on Radeon Xpress 200M and Radeon Mobility X1400
Public bug reported: I have an ATi Radeon Mobility X1400 GPU (in my Thinkpad Z61m). In Intrepid, I could use the fglrx driver without problems (and indeed the open-source driver did not work). After upgrading to Jaunty, the fglrx driver no longer works (reporting '(EE) No devices detected.'). 'panaggio' on #ubuntu+1 experienced the same issue with a Radeon Xpress 200M (e too had experienced the open-source driver not working in Intrepid). The Xorg.log from that run is attached. This is a regression from Intrepid (which will undoubtedly cause problems for people who are upgrading). The open-source -ati driver does now work for both these cards in Jaunty, at least for myself and panaggio, but only if the fglrx kernel module is /not/ loaded (that is, if fglrx-kernel-source is not installed and thus not loaded by DKMS). Otherwise, X locks up on start-up. I imagine this will cause lots of Radeon users to decide there is no working accelerated driver for their card after an upgrade... ** Affects: fglrx-installer (Ubuntu) Importance: Undecided Status: New -- fglrx No devices detected on Radeon Xpress 200M and Radeon Mobility X1400 https://bugs.launchpad.net/bugs/357705 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 357705] Re: fglrx No devices detected on Radeon Xpress 200M and Radeon Mobility X1400
** Attachment added: panaggio-Xorg.0.log http://launchpadlibrarian.net/25017101/panaggio-Xorg.0.log -- fglrx No devices detected on Radeon Xpress 200M and Radeon Mobility X1400 https://bugs.launchpad.net/bugs/357705 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 357705] Re: fglrx No devices detected on Radeon Xpress 200M and Radeon Mobility X1400
I'm not interested in using fglrx now the -ati drivers are working, but I think it's important that there's a clean and obvious upgrade path for people who used fglrx for these cards in intrepid. It is not obvious that one must uninstall the fglrx-kernel-source package to get a working system. Assuming that the X lockup is unavoidable, could the -ati driver detect the fglrx kernel module is loaded, produce a useful message and bail out rather than doing whatever it is that causes the system to lock up? That'd at least give people a clue how to fix this issue... -- fglrx No devices detected on Radeon Xpress 200M and Radeon Mobility X1400 https://bugs.launchpad.net/bugs/357705 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 334066] Re: xorg is terribly slow after Intrepid - Jaunty upgrade
I have an ATi Mobility X1400 GPU (Thinkpad Z61m) and I see the following: * The fglrx driver refuses to start, saying No screens found * With the radeon / ati driver plus the 2.6.28 kernel, I get a hard lockup in X shortly after it starts. My system responds to SysRq. * Rolling back to the 2.6.27 kernel which I was using with intrepid, I have a working X environment, but only if I disable Xinerama and DRI. * With Xinerama enabled, using the radeon driver and a 2.6.27 kernel, I get a segfault on X startup: Backtrace: 0: /usr/bin/X(xorg_backtrace+0x26) [0x4f1b66] 1: /usr/bin/X(xf86SigHandler+0x41) [0x485a61] 2: /lib/libc.so.6 [0x7f1a98db1040] 3: /usr/bin/X(dixLookupPrivate+0x4) [0x4347f4] 4: /usr/bin/X(xf86RandR12CreateScreenResources+0x50) [0x4b58e0] 5: /usr/bin/X [0x4abb8f] 6: /usr/bin/X(main+0x264) [0x433c34] 7: /lib/libc.so.6(__libc_start_main+0xe6) [0x7f1a98d9c5a6] 8: /usr/bin/X [0x433219] Saw signal 11. Server aborting. I also got a similar segfault (slightly different backtrace mentioning DRI) with 'Option DRI' in my xorg.conf -- but I can't be sure that wasn't also triggered by Xinerama. I'm attaching the failsafeX tarball from the segfaulting run. ** Attachment added: failsafeX-backup-090403234024.tar http://launchpadlibrarian.net/24965495/failsafeX-backup-090403234024.tar -- xorg is terribly slow after Intrepid - Jaunty upgrade https://bugs.launchpad.net/bugs/334066 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 334066] Re: xorg is terribly slow after Intrepid - Jaunty upgrade
The hard lockup in X I'm seeing is always just after the KWallet dialog appears asking me for my passphrase. Perhaps this is triggering some kind of composite event which is causing the lockup? -- xorg is terribly slow after Intrepid - Jaunty upgrade https://bugs.launchpad.net/bugs/334066 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 348553] Re: Xorg crashed with SIGSEGV in xf86RandR12CreateScreenResources()
I see this too. failsafeX tarball attached. I'm using a Radeon Mobility X1400 GPU (Thinkpad Z61m). I'll try to get some more information out of gdb (but probably not until tomorrow). ** Attachment added: failsafeX-backup-090403234024.tar http://launchpadlibrarian.net/24966327/failsafeX-backup-090403234024.tar -- Xorg crashed with SIGSEGV in xf86RandR12CreateScreenResources() https://bugs.launchpad.net/bugs/348553 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 287370] Re: sound completely gone even though volume is at full
I am experiencing a loss of audio output regarding my Ubuntu Mini 9. Perhaps the cause is similar to cherokee's, perhaps not. Bene and Chidester, I suspect this issue is affecting more than a few, and I believe it has something to do with attempting to install i386 packages on the Mini's lpia system. My audio became disabled immediately after I forced install of some i386 packages. It would be nice to be able to fix the problem without a complete system restoration. -- sound completely gone even though volume is at full https://bugs.launchpad.net/bugs/287370 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 299408] [NEW] Sun java6 unconnected sockets not implemented
Public bug reported: One of the applications I use frequently no-longer functions on Intrepid. The application is Cisco ADSM for the ASA5500 series security appliance. The error that is reported from ADSM is Unconnected sockets not implemented. Googling around shows that Sun Java 6 Update 10 has not had several of the socket methods implemented yet. Resolution: Rollback Java 6 to update 7 ** Affects: sun-java6 (Ubuntu) Importance: Undecided Status: New ** Description changed: One of the applications I use frequently no-longer functions on Intrepid. The application is Cisco ADSM for the ASA5500 series security appliance. The error that is reported from ADSM is Unconnected sockets not implemented. Googling around shows that Sun Java 6 Update 10 has not had several of the socket methods implemented yet. + + Resolution: Rollback Java 6 to update 7 -- Sun java6 unconnected sockets not implemented https://bugs.launchpad.net/bugs/299408 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234055] Re: Hardy tkdesk crashes on startup
Same problem in Intrepid as of 29/9/08 14:30 UK Summer Time Any chance of a fix? -- Hardy tkdesk crashes on startup https://bugs.launchpad.net/bugs/234055 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 249783] [NEW] Wrong message when sharing a root-owned folder
Public bug reported: Binary package hint: nautilus-share Ubuntu 8.04.1 nautilus-share 0.7.2-0ubuntu5 When a user with admin/sharing privileges attempts to share a root-owned folder (eg /shared) he gets the message: net usershare add: cannot share path/shared as we are restricted to only sharing directories we own The message suggests we ask admin to add usershare owner only = False to smb.conf. Throwing security away just to share 1 folder on 1 occasion? - Not a good idea. What it should do is put up a sudo-password box and share the folder. Failing that, the message should suggest gksudo nautilus to run nautilus as root to share the folder. ** Affects: nautilus-share (Ubuntu) Importance: Undecided Status: New -- Wrong message when sharing a root-owned folder https://bugs.launchpad.net/bugs/249783 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 235638] Re: package linux-restricted-modules-2.6.24-17-generic 2.6.24.12-17.36 failed to install/upgrade: dependency problems - leaving unconfigured
It is fairly common to have small /boot partitions at the start of a disk, so the probability of kernel upgrades filling up /boot is significant. Kernel upgrades should warn of this and offer to uninstall the oldest image to make space? The Ubuntu installer should warn if a /boot partition is too small? I had the same problem with one of my 50MB /boot partitions. The upgrade error messages did not indicate the problem, but those from sudo dpkg --configure -a did. -- package linux-restricted-modules-2.6.24-17-generic 2.6.24.12-17.36 failed to install/upgrade: dependency problems - leaving unconfigured https://bugs.launchpad.net/bugs/235638 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234055] Re: Hardy tkdesk crash on startup - workround
Work-round is: sudo ln -s /usr/lib/itcl3.2 /usr/share/tcltk/. To fix broken link to tkdesk documentation: sudo rm /usr/lib/tkdesk/doc sudo ln -s /usr/share/doc/tkdesk/tkdesk-doc /usr/lib/tkdesk/doc Tkdesk is looking in the wrong place for itcl after the change in location of tcl and tk in Hardy. Could be that itcl should have been changed to match the tcltk changes? Thanks for looking after tkdesk - a principal reason I use Ubuntu! -- Hardy tkdesk crashes on startup https://bugs.launchpad.net/bugs/234055 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234055] [NEW] Hardy tkdesk crashes on startup
Public bug reported: Binary package hint: tkdesk TKDESK 2.0-9 0 Dapper,Feisty versions were OK, but Hardy version (clean re-install of OS) fails to start. itcl.tcl is located in same place as for Dapper, and the location of tkdesksh in the tkdesk script is correct, but I get: Application initialization failed: Can't find a usable itcl.tcl in the following directories: /usr/share/tcltk/itcl3.2 /usr/lib/tkdesk/../lib/itcl3.2 /usr/lib/tkdesk/../library /usr/lib/tk desk/../../library /usr/lib/tkdesk/../../itcl/library /usr/lib/tkdesk/../../../itcl/library This probably means that Itcl/Tcl weren't installed properly. If you know where the Itcl library directory was installed, you can set the environment variable ITCL_LIBRARY to point to the library directory. The tkdesk script seems to be using an older version of tkdesksh. Please edit the third line of this script to point to the absolute path and file name of tkdesksh. Both are usually located in the same directory. An alternative is also to modify your PATH environment variable to list the directory where you installed Tkdesk 2.0b before the one that contains the older tkdesksh. The easiest method is of course to simply delete the old tkdesksh. ** Affects: tkdesk (Ubuntu) Importance: Undecided Status: New -- Hardy tkdesk crashes on startup https://bugs.launchpad.net/bugs/234055 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 218464] Re: suddenly it won't play real player streaming radio anymore
for example, http://www.kvmr.org/webcast.html but now it is inexplicably working again. I suspect it has to do with pulseaudio because it is also causing me troubles in skype On Thu, 2008-04-17 at 12:29 +, Pedro Villavicencio wrote: Thanks for your report, do you have an example url where to test that? ** Changed in: totem (Ubuntu) Importance: Undecided = Low Assignee: (unassigned) = Ubuntu Desktop Bugs (desktop-bugs) Status: New = Incomplete -- suddenly it won't play real player streaming radio anymore https://bugs.launchpad.net/bugs/218464 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218464] [NEW] suddenly it won't play real player streaming radio anymore
Public bug reported: Binary package hint: totem suddenly totem movie player won't play real player streaming radio it used to work just fine on ProblemType: Bug Architecture: i386 Date: Wed Apr 16 18:06:31 2008 DistroRelease: Ubuntu 8.04 ExecutablePath: /usr/bin/totem-gstreamer Package: totem-gstreamer 2.22.1-0ubuntu2 PackageArchitecture: i386 ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: totem Uname: Linux 2.6.24-16-generic i686 ** Affects: totem (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- suddenly it won't play real player streaming radio anymore https://bugs.launchpad.net/bugs/218464 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218464] Re: suddenly it won't play real player streaming radio anymore
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/13530754/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/13530755/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/13530756/ProcStatus.txt -- suddenly it won't play real player streaming radio anymore https://bugs.launchpad.net/bugs/218464 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 210232] [NEW] skype sound does not work on 8.04
Public bug reported: skype 2.0 sound does not work since I upgraded to ubuntu 8.04. I checked the settings and they are alright and the sound does work on other things, such as the startup sounds and internet radio. ** Affects: ubuntu Importance: Undecided Status: New -- skype sound does not work on 8.04 https://bugs.launchpad.net/bugs/210232 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 210232] Re: skype sound does not work on 8.04
ok it does work when I started it with that command, the other 2 commands did not do anything at all thanks On Tue, 2008-04-01 at 21:34 +, Susan Cragin wrote: As a test, could you run skype with this command: pasuspender skype and see if it works? It would also be helpful if you sent the output of the following commands: aplay -l lspci -v -l -- skype sound does not work on 8.04 https://bugs.launchpad.net/bugs/210232 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 133214] Re: [xpress 200m] doesn't load the gnome desktop
I'm hitting this as well. I've been tracking gutsy for a few months now and last night the upgrade broke my Kubuntu desktop. the kdm login screen is fine but once KDE starts to load the graphics go really screwy. All the icons seem to be 10 times the normal size and I only see a small portion of them, the base windows of the apps load but the contents of the windows is blank. Although the apps appear to work the (broken) drawing is really slow. I have upgraded all my X packages from here http://people.ubuntu.com/~bryce/Testing/xorg-server-backports/ http://people.ubuntu.com/~bryce/Testing/ati/ But the problem still exists. Here's the contents of my xorg.conf which I generated with dpkg-reconfigure xserver-xorg -phigh # xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type man xorg.conf at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section Files EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option CoreKeyboard Option XkbRules xorg Option XkbModel pc105 Option XkbLayout us Option XkbOptionslv3:ralt_switch EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/input/mice Option Protocol ImPS/2 Option ZAxisMapping 4 5 Option Emulate3Buttons true EndSection Section InputDevice Identifier Synaptics Touchpad Driver synaptics Option SendCoreEventstrue Option Device/dev/psaux Option Protocol auto-dev Option HorizScrollDelta 0 EndSection Section InputDevice Driver wacom Identifier stylus Option Device/dev/input/wacom Option Type stylus Option ForceDevice ISDV4 # Tablet PC ONLY EndSection Section InputDevice Driver wacom Identifier eraser Option Device/dev/input/wacom Option Type eraser Option ForceDevice ISDV4 # Tablet PC ONLY EndSection Section InputDevice Driver wacom Identifier cursor Option Device/dev/input/wacom Option Type cursor Option ForceDevice ISDV4 # Tablet PC ONLY EndSection Section Device Identifier ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP] Driver vesa BusID PCI:1:5:0 EndSection Section Monitor Identifier Generic Monitor Option DPMS HorizSync 28-70 VertRefresh 43-60 EndSection Section Screen Identifier Default Screen Device ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP] Monitor Generic Monitor DefaultDepth24 SubSection Display Modes 1400x1050 1280x1024 1024x768 EndSubSection EndSection Section ServerLayout Identifier Default Layout Screen Default Screen InputDevice Generic Keyboard InputDevice Configured Mouse InputDevice stylusSendCoreEvents InputDevice cursorSendCoreEvents InputDevice eraserSendCoreEvents InputDevice Synaptics Touchpad EndSection ** Attachment added: Xorg.0.log.bad http://launchpadlibrarian.net/9117477/Xorg.0.log.bad -- [xpress 200m] doesn't load the gnome desktop https://bugs.launchpad.net/bugs/133214 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs