[Bug 1904102] [NEW] Upgrade from 5.4.0-52 to 5.4.0-53 lost 2.5gbe ethernet on B550 board
Public bug reported: I was running Ubuntu 20.04 on a B550 motherboard. I believe the 2.5gb ethernet is actually only in newer kernels normally but Ubuntu backport it. It was working fine, then I received a kernel upgrade 5.4.0-53 and the ethernet dissapeared. If I use grub to boot into the old kernel 5.4.0-52 the ethernet is there still so it appears to be the newer kernel. ** Affects: linux (Ubuntu) Importance: Undecided Status: Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1904102 Title: Upgrade from 5.4.0-52 to 5.4.0-53 lost 2.5gbe ethernet on B550 board To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1904102/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1774429] Re: Unable to install pgpool2 in Ubuntu 18.04
We also needed pgpool2 in bionic so I decided to try to compile it from the 18.10 source package found here: https://packages.ubuntu.com/source/cosmic/pgpool2 It compiled without any issues, built into 4 binary debs, which I installed on 18.04 It works well, I think these packages should be built on 18.04 and pushed into backports. Who can make that happen? if 18.04 is going to be supported for 10 years, we really want pgpool2 in the backports repository if possible. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1774429 Title: Unable to install pgpool2 in Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pgpool2/+bug/1774429/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1662097] Re: lenovo t500 kernel hangs with flashing caps lock LED after installing intel-microcode
Yeah I suppose. I don't use this laptop anymore because I got a better one, but I recall having to remove the intel-microcode package to get my laptop booting again at the time. It's an older laptop though, I am quite happy to close this issue. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1662097 Title: lenovo t500 kernel hangs with flashing caps lock LED after installing intel-microcode To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/intel-microcode/+bug/1662097/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1662097] Re: lenovo t500 kernel hangs with flashing caps lock LED after installing intel-microcode
Kernel from 16.04 is now booting again after using old kernel to remove the intel-microcode package then booting into the new kernel again. ** Summary changed: - intel cpu microcode package killed my laptop + lenovo t500 kernel hangs with flashing caps lock LED after installing intel-microcode -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1662097 Title: lenovo t500 kernel hangs with flashing caps lock LED after installing intel-microcode To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/intel-microcode/+bug/1662097/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1662097] Re: intel cpu microcode package killed my laptop
It appears to be a kernel issue as the system now boots when booting the previous 14.04 kernel from before the upgrade, but hangs when booting the 16.04 kernel with flashing capslock LED again, kind of like described here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/303276 The strange thing is that the 16.04 kernel only started playing up when the intel microcode package was installed, so I am going to try to uninstall it, boot the 16.04 kernel and see what that does. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1662097 Title: lenovo t500 kernel hangs with flashing caps lock LED after installing intel-microcode To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/intel-microcode/+bug/1662097/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1662097] [NEW] intel cpu microcode package killed my laptop
Public bug reported: Had a working system, just upgraded it to Kubuntu 16.04, everything great after the upgrade. The driver tool then "recommended" me to install this CPU microcode package, after that the laptop failed to boot the kernel and the caps lock is flashing. Laptop is a lenovo t500 core 2 duo with 8gb RAM, I just can't seem to boot the laptop at all anymore since installing this CPU microcode package. My question is, is it really such a good idea to "recommend" this package under drivers if it can kill your system like this? ** Affects: intel-microcode (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1662097 Title: intel cpu microcode package killed my laptop To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/intel-microcode/+bug/1662097/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1413401] [NEW] python-django-celery package is broken in Trusty
Public bug reported: When trying to import this module, you get this: cannot import name abbrtask It appears there may be a patch on the Github repository in the v2.5.5-fixsouth3 tag. https://github.com/celery/django- celery/commit/6eb63a86f58ea099e8925ea70419570498b76ab7 ** Affects: django-celery (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1413401 Title: python-django-celery package is broken in Trusty To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/django-celery/+bug/1413401/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 603128] Re: python-magic is incomplete on Ubuntu 10.04 LTS?
I had quick a look inisde the Ubuntu 12.04 package for python-magic and it definitely appears to be the same library as on pip, it's just a very old version which doesn't appear to be very useful at all, also it's not versioned correctly, it has the same version as libmagic (5.09-2) but it should really by 0.4.6 if the latest from pip was to be packaged. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/603128 Title: python-magic is incomplete on Ubuntu 10.04 LTS? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/file/+bug/603128/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 603128] Re: python-magic is incomplete on Ubuntu 10.04 LTS?
Seems to be broken on Ubuntu 12.04 and 13.10 and possibly all versions between that. Not sure what is up with this, is this actually a different library than "pip install python-magic" will install??? >>> import magic >>> >>> >>> >>> magic.from_buffer >>> >>> >>> Traceback (most recent call last): File "", line 1, in AttributeError: 'module' object has no attribute 'from_buffer' Also I noticed the version is completely wrong it's like version 5.04 when python-magic on pip is 0.4.6, what is up with that? https://pypi.python.org/pypi/python-magic/ Unfortunately I need this package desperately, so I am going to have to package it up myself and bump up the version of the package, even though it's wrong, so that it will overinstall the broken python-magic package. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/603128 Title: python-magic is incomplete on Ubuntu 10.04 LTS? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/file/+bug/603128/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 585657] Re: Transfering large files to nfs mount causes system freeze
The systems I am running are also Ubuntu 13.10 and the 3.11 kernel. This bug is a quite annoying, as every time I copy a file to my server over NFS, the client doing the copying will stall/freeze for a few seconds at the end of the copy and lock up Nautilus/Dolphin for a few seconds and then wake up again. I have been considering going back to SSHFS as NFS in it's current state is almost unusable with all that stalling. I don't know if this is a bug that has resurfaced on Ubuntu 13.10 / kernel 3.11, or if this is actually a new bug that needs to be opened. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/585657 Title: Transfering large files to nfs mount causes system freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/585657/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 585657] Re: Transfering large files to nfs mount causes system freeze
I am experiencing the same issue as described in comment #47 on Ubuntu 13.10 Both server and client are Ubuntu 13.10, copying from server to client does not cause lockups, but copying to the server will cause Dolphin to lockup until the copy is complete. I am not sure if this is a new issue or an old bug coming back, if this has been marked as fixed in older versions of Ubuntu, yet the problem still seems to persist in 13.10. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/585657 Title: Transfering large files to nfs mount causes system freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/585657/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 911732] Re: [12.04] citadel-server is producing errors every second in syslog (DB: not a restored transaction DB: PANIC: Invalid argument citadel: bdb(): PANIC: Invalid argument citadel: bdb(): t
Anyone have an ETA on this bug, because now I am forced to put 12.10 on my VPS, even though 12.04 is supposed to be an LTS release and I would much rather use that. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/911732 Title: [12.04] citadel-server is producing errors every second in syslog (DB: not a restored transaction DB: PANIC: Invalid argument citadel: bdb(): PANIC: Invalid argument citadel: bdb(): txn_commit: DB_RUNRECOVERY: Fatal error, run database recover) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/citadel/+bug/911732/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 251632] Re: DHCP client should not create temporary files in /etc
I noticed that this is fixed in Ubuntu 12.04, /etc/resolv.conf is now a symlink to /run/resolvconf/resolv.conf and /run is mounted as tmpfs so it now works if /etc is mounted as readonly. Maybe this bug can be closed now? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/251632 Title: DHCP client should not create temporary files in /etc To manage notifications about this bug go to: https://bugs.launchpad.net/dhcp/+bug/251632/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 761065] Re: [Sandybridge] Spurious "*ERROR* Hangcheck timer elapsed... blt ring idle" messages in dmesg when using compiz
Why does it say this bug is fixed for natty, when it still is happening? I have fully upgraded my system (to the 2.6.38-15 kernel) and it's still happening. I have tried a lot of workarounds mentioned here, none work, I still get GPU hangs. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/761065 Title: [Sandybridge] Spurious "*ERROR* Hangcheck timer elapsed... blt ring idle" messages in dmesg when using compiz To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/761065/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 254978] Re: [needs-packaging] Panda3D graphics engine
They do already have debs yes, however the problem we have always experienced at work over the years, is that when a newer version of Ubuntu comes out they won't build the current stable version of Panda 3D for that newer version for a quite some time. In the end, we usually have to end up installing one for an older version of Ubuntu, which may or may not work, this isn't cool. I am going to look if it is possible to build Panda3D wihout fmodex. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/254978 Title: [needs-packaging] Panda3D graphics engine To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/254978/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 254978] Re: [needs-packaging] Panda3D graphics engine
Sorry I meant "fmodex", and the license of this library is not really open source compatible from what I can see, which might be half the problem why Panda3D is not in the repository now. Fmod have a non-commercial license which is restrictive, the library comes as pre-compiled .so files without source, and some header files to use the library, that is all. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/254978 Title: [needs-packaging] Panda3D graphics engine To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/254978/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 254978] Re: [needs-packaging] Panda3D graphics engine
I think one of the problems might be that this requires fmod to compile, which isn't an open source license. It appears that the Panda 3D Launchpad team have packaged up fmoxex, but it may be a binary only package. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/254978 Title: [needs-packaging] Panda3D graphics engine To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/254978/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 254978] Re: [needs-packaging] Panda3D graphics engine
I downloaded the source and it doesn't seem to have any source of standard build environment, no make files, no automake, no cmake, or qmake, so this might not be as easy as I thought. I did find this: https://launchpad.net/~panda3d/+archive/ppa Does this not mean we need to get these packages in the repository first?? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/254978 Title: [needs-packaging] Panda3D graphics engine To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/254978/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 254978] Re: [needs-packaging] Panda3D graphics engine
I want to look into packaging this if it's cool, I am proficient with Python, C++, and we use Panda 3D extensively at work already. I have done my own .deb packaging and also package our own software at work, so I am fairly familiar with the packaging tools already. I will look into building some packages at work tomorrow and see how it goes, I might need some help in getting started though, as I have never been an official maintainer. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/254978 Title: [needs-packaging] Panda3D graphics engine To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/254978/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 829086] Re: Artifacts in 3D with Sandy Bridge
Yes, intel-gpu-tools in both Natty and Oneiric doesn't work from the repository (you get the error - Couldn't map MMIO region: No such file or directory). Compiling intel-gpu-tools from source is one option, but I also found a PPA that works, and you can also just download the .deb without adding the PPA: https://launchpad.net/~sarvatt/+archive/intel-gpu-tools For those people that are still experiencing some artifacts, I have been playing around with the "sudo intel_reg_write 0x9404 0x1800" fix most of the afternoon and have come to find that it matters when you run this command. This command must be run before any 3D happens, if you have already had the artifacts and then run the command it will not fix it, even if you restart your 3D application. It appears once the graphics card is in this "state" already, the fix won't work. You must run the command just after you started the computer, when there have been no artifacts or 3D yet. Because the command has to be run as root (and it doesn't seem to matter if you run it before X starts), I have found the perfect place to place this line is in the /etc/rc.local file, just before the "exit 0" line. Since /etc/rc.local is executed by root, you don't have to put sudo in front either. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/829086 Title: Artifacts in 3D with Sandy Bridge To manage notifications about this bug go to: https://bugs.launchpad.net/mesa/+bug/829086/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 829086] Re: Artifacts in 3D with Sandy Bridge
We got an email back from Intel, the issue was fixed in Keith's drm- intel-next kernel branch and heading upstream. Apparently it's a clock gating issue on Sandybridge. As a temporary fix, if you have intel-gpu-tools, you can run: sudo intel_reg_write 0x9404 0x1800 For me it seems to have fixed the issue, I am running our software through a test now and so good so far. For reference, the two commits are: commit 9ca1d10d748e56964de95e3ed80211b192f56cf4 Author: Eric Anholt Date: Mon Nov 7 16:07:05 2011 -0800 drm/i915: Turn on another required clock gating bit on gen6. Unlike the previous one, I don't have known testcases it fixes. I'd rather not go through the same debug cycle on whatever testcases those might be. Signed-off-by: Eric Anholt Cc: sta...@kernel.org Signed-off-by: Keith Packard commit 406478dc911e16677fbd9c84d1d50cdffbc031ab Author: Eric Anholt Date: Mon Nov 7 16:07:04 2011 -0800 drm/i915: Turn on a required 3D clock gating bit on Sandybridge. Fixes rendering failures in Unigine Tropics and Sanctuary and the mesa "fire" demo. Signed-off-by: Eric Anholt Cc: sta...@kernel.org Signed-off-by: Keith Packard -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/829086 Title: Artifacts in 3D with Sandy Bridge To manage notifications about this bug go to: https://bugs.launchpad.net/mesa/+bug/829086/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 829086] Re: Artifacts in 3D with Sandy Bridge
I am going to try it on Thursday, which is when I am back at work and have access to the hardware, at home I don't have any sandy bridge based systems to play with plus I am quite busy with my third year project at the moment. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/829086 Title: Artifacts in 3D with Sandy Bridge To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/829086/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 829086] Re: Artifacts in 3D with Sandy Bridge
I have also tried two different motherboards, with the same H67 chipset, one Asus, and one Gigabyte. I have also tried different RAM, so it is not RAM related. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/829086 Title: Artifacts in 3D with Sandy Bridge To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/829086/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 829086] Re: Artifacts in 3D with Sandy Bridge
** Attachment added: "Screenshot of our software showing serious artifacts" https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/829086/+attachment/2290403/+files/milkhub.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/829086 Title: Artifacts in 3D with Sandy Bridge To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/829086/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 829086] Re: Artifacts in 3D with Sandy Bridge
** Attachment added: "Another screenshot of tuxracer showing artifacts in red" https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/829086/+attachment/2290402/+files/tuxracer2.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/829086 Title: Artifacts in 3D with Sandy Bridge To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/829086/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 829086] Re: Artifacts in 3D with Sandy Bridge
** Attachment added: "Screenshot of tuxracer showing artifacts marked in red" https://bugs.launchpad.net/bugs/829086/+attachment/2290401/+files/tuxracer1.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/829086 Title: Artifacts in 3D with Sandy Bridge To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/829086/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 829086] [NEW] Artifacts in 3D with Sandy Bridge
Public bug reported: I am experiencing serious artifacts with the Sandy Bridge graphics card when doing 3D. Because we are trying to use this card at work, I have been testing this card for the last 2 months trying to get it to work with no luck, so I have done quite a lot of testing towards this and have found nothing so far that fixes this issue. This bug seems to happen to certain parts of the 3D scene only, it happens with our software quite badly which uses Panda 3D (I will attach a screenshot), but it is not limited to Panda 3D or our software at all because it also happens with Extreme Tux Racer if you look closely at the trees when you pause the game (I have taken a screenshot of this too). What you will notice is a pattern of dots (artifacts) in certain areas of the 3D scene, also the dots flicker like snow, which the screenshots cannot show exactly. I have marked the areas that have artifacts in Extreme Tux Racer in red, but in the screenshot of our software it is so bad I don't even need to mark this. I am using Ubuntu Natty 32 bit, I have tried the following: * Intel drivers supplied with natty (2.14) and mesa supplied with natty (7.10.2) * Cutting edge Intel drivers and mesa 7.12 prerelease from Xorg edgers * Intel drivers 2.15 from various PPA's with Mesa 7.11 GIT pre-release * Intel drivers 2.15, Linux 3.0, Mesa 7.11 final release from Michael Kuhn PPA * Linux 3.0, Mesa 7.11 final from Michael Kuhn PPA + latest Intel 2.16 drivers from Xorg edgers * Both HD2000 and HD3000 model CPUs do it (both Core i3) * I have experimented with turning different settings on and off using driconf, but it still happens I have also tried to install Oneiric Alpha 3 32 bit, but the desktop CD crashes half way during the install, the alternative CD crashes during the install when it asks for the language because it doesn't like USB keyboards, and the server CD also crashes, before it can even start, so I cannot install Oneiric at this point to test it. ** Affects: xserver-xorg-video-intel (Ubuntu) Importance: Undecided Status: New ** Tags: intel sandybridge -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/829086 Title: Artifacts in 3D with Sandy Bridge To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/829086/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 656745] Re: notebook crashes on battery with particular wlan or other pcie devices enabled (dell vostro 3700, asus, medion, acer and others)
I tried Ubuntu 11.04 amd64 on my Vostro 3700 and the problem still persists, also you cannot uninstall pm-utils to put on pm-utils 1.3, because that will also remove gdm and many other pakages. I have not found a workaround yet, installing laptop-mode-tools does not fix the problem, and neither does adding pcie_aspm=off to grub and running update-grub. I am dissapointed to see this bug carry over to another version of Ubuntu, I am really hoping this bug will be fixed with Ubuntu 11.10, as it affects so many people with laptops purchased in the last year or so. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/656745 Title: notebook crashes on battery with particular wlan or other pcie devices enabled (dell vostro 3700, asus, medion, acer and others) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 448533] Re: Banshee (sometimes) freezes on start playing
I think it has to do with the size of your library. I have a large media library of 6000+ and Banshee 1.5 freezes really bad when you start playing, add items to the play list, and other such actions introduces the freezing. The music will keep playing, but the GUI freezes, it is actually really really annoying. This bug was introduced in Banshee 1.5 -- Banshee (sometimes) freezes on start playing https://bugs.launchpad.net/bugs/448533 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 367214] Re: utils.calculate_cloud can leave font_size unset for most frequent tag
** Attachment added: "patch to fix tag cloud generation (issue 91)" http://launchpadlibrarian.net/25991637/dtcw.patch -- utils.calculate_cloud can leave font_size unset for most frequent tag https://bugs.launchpad.net/bugs/367214 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 367214] [NEW] utils.calculate_cloud can leave font_size unset for most frequent tag
Public bug reported: Binary package hint: python-django-tagging This is a long standing issue on Google Code, issue 91: http://code.google.com/p/django-tagging/issues/detail?id=91 This issue has been reported on Google Code quite some time ago, and although there has been a patch available for well over a year, the patch just doesn't seem to get applied. Without this patch, many websites written in Django will often crash when generating a tag cloud, because the font_size field does not always get set, and this does seem to happen quite a lot. I am not sure why this patch has not been applied for so long, maybe the upstream author will need to be contacted about this. I have created a package myself with this patch applied in my own PPA should anyone need it for the time being: https://launchpad.net/~robvdl/+archive/ppa ** Affects: python-django-tagging (Ubuntu) Importance: Undecided Status: New -- utils.calculate_cloud can leave font_size unset for most frequent tag https://bugs.launchpad.net/bugs/367214 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 285660] Re: Hard drive light goes on every time cursor keys pressed in message
I found out this is caused by Glipper when "save history" is turned on (which is the default). Please close this bug. -- Hard drive light goes on every time cursor keys pressed in message https://bugs.launchpad.net/bugs/285660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 285670] Re: hard drive light goes on when text is selected
I found out this is caused by Glipper when "save history" is turned on (which is the default). Please close this bug. -- hard drive light goes on when text is selected https://bugs.launchpad.net/bugs/285670 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 285660] Re: Hard drive light goes on every time cursor keys pressed in message
This bug also happens in gedit, except when selecting text. in gedit, when selecting text, for every position the mouse moves while selecting, the hard drive light goes on, causing it to go flat tack when selecting text. See bug #285670 -- Hard drive light goes on every time cursor keys pressed in message https://bugs.launchpad.net/bugs/285660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 285670] Re: hard drive light goes on when text is selected
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/18674973/Dependencies.txt ** Attachment added: "ProcMaps.txt" http://launchpadlibrarian.net/18674974/ProcMaps.txt ** Attachment added: "ProcStatus.txt" http://launchpadlibrarian.net/18674975/ProcStatus.txt -- hard drive light goes on when text is selected https://bugs.launchpad.net/bugs/285670 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 285670] [NEW] hard drive light goes on when text is selected
Public bug reported: Binary package hint: gedit When selecting text in gedit in Intrepid BETA, the hard drive light goes continually on, for every position the mouse is moved. Kind of similar to bug #285660 I filed earlier for Evolution. ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 8.10 ExecutablePath: /usr/bin/gedit NonfreeKernelModules: nvidia Package: gedit 2.24.0-0ubuntu1 ProcEnviron: SHELL=/bin/bash PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_NZ.UTF-8 SourcePackage: gedit Uname: Linux 2.6.27-7-generic i686 ** Affects: gedit (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- hard drive light goes on when text is selected https://bugs.launchpad.net/bugs/285670 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 285660] Re: Hard drive light goes on every time cursor keys pressed in message
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/18674766/Dependencies.txt ** Attachment added: "ProcMaps.txt" http://launchpadlibrarian.net/18674767/ProcMaps.txt ** Attachment added: "ProcStatus.txt" http://launchpadlibrarian.net/18674768/ProcStatus.txt -- Hard drive light goes on every time cursor keys pressed in message https://bugs.launchpad.net/bugs/285660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 285660] [NEW] Hard drive light goes on every time cursor keys pressed in message
Public bug reported: Binary package hint: evolution When I am editing a message in Evolution in Intrepid, and I hold the cursor keys down on the keyboard to move in the document, the hard drive light goes crazy. The hard drive light goes on every time I move the cursor one position up, down, left or right. So holding one of the arrows down, makes it go flat tack. I have plenty of RAM, so it should not really be using the hard drive for this. ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 8.10 ExecutablePath: /usr/bin/evolution NonfreeKernelModules: nvidia Package: evolution 2.24.0-0ubuntu3 ProcEnviron: SHELL=/bin/bash PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_NZ.UTF-8 SourcePackage: evolution Uname: Linux 2.6.27-7-generic i686 ** Affects: evolution (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- Hard drive light goes on every time cursor keys pressed in message https://bugs.launchpad.net/bugs/285660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 264191] Re: python-django FFe for 1.0
I've been packaging it in my PPA for a while now, however I realise that most likely that won't do as it will need to be properly imported from Debian instead. -- python-django FFe for 1.0 https://bugs.launchpad.net/bugs/264191 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 264191] Re: python-django FFe for 1.0
Django 1.0 has been released now. It would be really good if it will make it into the Intrepid repository. Django 0.96 is very old and hardly anyone uses it anymore. Even before Django 1.0's release, a lot of people were using the SVN because of how old 0.96 was getting. It makes very little sense to bundle 0.96 anymore, and if possible should really push for 1.0 in Intrepid. -- python-django FFe for 1.0 https://bugs.launchpad.net/bugs/264191 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 251344] Re: Hardy proposed 2.6.24-20-generic kernel update will not boot
Happened to me too, wouldn't boot, except for a blank blank screen. But why use a PPA to resolve the issue? Why not just boot into the old '19' kernel, remove the '20' kernel, and untick backports under software sources. -- Hardy proposed 2.6.24-20-generic kernel update will not boot https://bugs.launchpad.net/bugs/251344 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 198267] Re: wireless rt61pci driver buggy in Hardy alpha (only 1Mbit/s) - used to be fine on Gutsy
Update: After reboot, I got 1 mbps again, first I tried: sudo ifdown -a sudo ifup -a Nothing happened at all, network manager didnt even seem to bring the link down at all typing the ifdown command, but then again I have had loads of issues with network manager both in gutsy and hardy, both for wireless and wired networks, I don't really trust that app it seems a bit flakey still. Anyway, so I tried clicking on my wireless connection again, network manager reconnected to my network, and I got full speed again after the reconnect. After a reboot I seem to have to simply click on my network to reconnect to get full speed, as it seems to still start at 1 mbits after a reboot. easily solved with a reconnect but shouldn't really be necessary. -- wireless rt61pci driver buggy in Hardy alpha (only 1Mbit/s) - used to be fine on Gutsy https://bugs.launchpad.net/bugs/198267 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 198267] Re: wireless rt61pci driver buggy in Hardy alpha (only 1Mbit/s) - used to be fine on Gutsy
Yes, the linux-backports-modules-hardy-generic package fixed this problem for me to I purchased an Edimax EW-7608Pg wireless PCMCIA card using the rt61pci driver, before installing the backports modules I got 1mbps connection and the link light would not light up, only the activity light, but it did work. After installing the backports modules and rebooting I am getting full speed now and the link light is now up. Thank you. -- wireless rt61pci driver buggy in Hardy alpha (only 1Mbit/s) - used to be fine on Gutsy https://bugs.launchpad.net/bugs/198267 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238823] Re: [MASTER] Firefox 3 RC1: color (grey) used for urls in the awesome bar make them hard to read in multiple themes (human, etc.)
Wass: it looks like the bug didn't get fixed for Firefox 3 final, which saddens me as it was really so easy to revert. The bug also affects the Windows version of Firefox 3. Although they may have only seen this bug as cosmetic, what really makes this bug so important are older LCD monitors. At course we have older LCD monitors and we have to remember that on older LCD monitors, it is much harder to distinguish between light grey and white, basically you cannot read the text at all on these monitors as it just appears white. For now all you can do is apply the userChrome patch, both on Linux and Windows versions of Firefox 3, go into your Firefox user profile directory, then sub-directory chrome, and place the userChrome.css file attached by helios91940 -- [MASTER] Firefox 3 RC1: color (grey) used for urls in the awesome bar make them hard to read in multiple themes (human, etc.) https://bugs.launchpad.net/bugs/238823 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238791] Re: New Firefox 3 RC1 update lines on dropdown address bar are now really light since BETA 5
I've taken screenshots of both Human and Clearlooks in BETA 5 using the Hardy Live CD, and then again of both themes in RC1 when Firefox 3 is updated via the repositories, and put them in one image for side by side comparison. There definitely is a difference between RC1 and BETA 5 as the screenshots show, even in Human, but it's most noticeable in Clearlooks as it's at the lines appear at their lightest there. Should it not be considered looking at anyway, I mean Clearlooks is the default Gnome theme, every Linux distro has Clearlooks on it, and a lot of people who do not like brown are going to choose Clearlooks as their theme anyway right after they installed Ubuntu, since it's pre-installed in Hardy, and currently in RC1 the entire dropdown looks like one white slab with no divider lines, especially on older LCD's where you cannot distinguish between light grey and white. The only other way out, would be a userChrome.css hack otherwise. ** Attachment added: "firefox3_locationbar_dropdown.png" http://launchpadlibrarian.net/15189237/firefox3_locationbar_dropdown.png -- New Firefox 3 RC1 update lines on dropdown address bar are now really light since BETA 5 https://bugs.launchpad.net/bugs/238791 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238791] Re: New Firefox 3 RC1 update lines on dropdown address bar are now really light since BETA 5
I am using the default Firefox theme, just the Clearlooks GTK theme instead of Human, which is well a fairly commonly used theme and it's there by default in Gnome. I will have to create a screenshot tomorrow from the Hardy Live CD, switching the GTK theme to Clearlooks and this time using Firefox 3 BETA 5, since this is on the Live CD, saves me having to revert my machine to the old version. I can agree it's not much of a bug, it's cosmetic, but it wasn't there in BETA 5, I think the old version worked better with the Clearlooks GTK theme, and possibly other GTK themes. -- New Firefox 3 RC1 update lines on dropdown address bar are now really light since BETA 5 https://bugs.launchpad.net/bugs/238791 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238791] Re: New Firefox 3 RC1 update lines on dropdown address bar are now really light since BETA 5
** Attachment added: "firefox3-address-bar.png" http://launchpadlibrarian.net/15169505/firefox3-address-bar.png -- New Firefox 3 RC1 update lines on dropdown address bar are now really light since BETA 5 https://bugs.launchpad.net/bugs/238791 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 238791] [NEW] New Firefox 3 RC1 update lines on dropdown address bar are now really light since BETA 5
Public bug reported: Binary package hint: firefox Ever since upgrading from Firefox 3 BETA 5 to Firefox 3 RC1 via the repositories, I noticed a bug in the rendering of the address bar drop down. The horizontal lines in between addresses are suddenly extremely light and almost not visible at all. I am using the standard Firefox theme and Clearlooks GTK theme, so nothing unusual. This bug happened as soon as upgrading to the new version via the standard Ubuntu repository. ** Affects: firefox (Ubuntu) Importance: Undecided Status: New -- New Firefox 3 RC1 update lines on dropdown address bar are now really light since BETA 5 https://bugs.launchpad.net/bugs/238791 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 202068] Re: imagemagick dependency error in Hardy: should install libmagick9
Sorry for the comment pollution, but you can still work around this issue by manually downloading the libmagick9 deb file, I found here on launchpad: i386: https://launchpad.net/ubuntu/hardy/i386/libmagick9/7:6.2.4.5.dfsg1-2ubuntu1 amd64: https://launchpad.net/ubuntu/hardy/amd64/libmagick9/7:6.2.4.5.dfsg1-2ubuntu1 The status of the packages (in the left) says "deleted", so I would best grab them quick if you need them. Install with "sudo dpkg -i package.deb" -- imagemagick dependency error in Hardy: should install libmagick9 https://bugs.launchpad.net/bugs/202068 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 202068] Re: imagemagick dependency error in Hardy: should install libmagick9
libmagick10 is in the repository but libmagick9 is not and if you try it install it, it says it has been obsoleted. Maybe imagemagick itself is an older version than libmagick in the repository. -- imagemagick dependency error in Hardy: should install libmagick9 https://bugs.launchpad.net/bugs/202068 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 202068] Re: imagemagick dependency error in Hardy: should install libmagick9
This was fixable at first, when Hardy was still in beta, but now things are worse because the package needed, libmagick9 is no longer in the repository so the workaround doesn't work anymore, and the bug is still not resolved. So if you need PHP and imagemagick, what do you do now? -- imagemagick dependency error in Hardy: should install libmagick9 https://bugs.launchpad.net/bugs/202068 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194919] Re: libopenal needs replacement
I agree with this as well, at the moment many games make horrible crackly sound on anything but Creative Labs sound cards, at the moment there are two workarounds: - Get a Creative sound card (But not the X-Fi which isn't Linux compatible yet) - Manually compile the OpenAL software drivers, and stick with your previous sound card OpenAL has been broken like this for a few releases of Ubuntu now, it's been like this far too long, com'on let's fix this issue :) -- libopenal needs replacement https://bugs.launchpad.net/bugs/194919 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 202706] Re: MySQL 5.0.51 (in hardy) is a broken release, and return wordpress posts in the wrong order
Here's the actual MySQL bug for tis problem: http://bugs.mysql.com/bug.php?id=32202 -- MySQL 5.0.51 (in hardy) is a broken release, and return wordpress posts in the wrong order https://bugs.launchpad.net/bugs/202706 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 202706] [NEW] MySQL 5.0.51 (in hardy) is a broken release, and return wordpress posts in the wrong order
Public bug reported: Binary package hint: mysql-server-5.0 I have an existing website running on Wordpress, I moved it from an Edgy to a new Hardy server and post were shown in reverse order. I have posted about the issue on the Wordrpess forums, and other people are having this issue too. The wordpress forum moderators say MySQL 5.0.51 is broken, here is the sticky post: http://wordpress.org/support/topic/154622?replies=15 This looks like a serious issue, and I hope we can still push a new version of MySQL before Hardy gets released, it will be a real shame to see Hardy getting shipped with a broken version of MySQL. ** Affects: mysql-dfsg-5.0 (Ubuntu) Importance: Undecided Status: New -- MySQL 5.0.51 (in hardy) is a broken release, and return wordpress posts in the wrong order https://bugs.launchpad.net/bugs/202706 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 202068] [NEW] imagemagick dependency error in Hardy: should install libmagick9
Public bug reported: I installed php5-imagemagick on Hardy development branch and ran PHP from the command line: php and got the following error: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20060613+lfs/imagick.so' - libWand.so.9: cannot open shared object file: No such file or directory in Unknown on line 0 I had to manually install libmagick9 from the repository, but really, when installing the imagemagick package, libmagick9 should have been automatically installed as a dependency which it didn't. ** Affects: imagemagick (Ubuntu) Importance: Undecided Status: New -- imagemagick dependency error in Hardy: should install libmagick9 https://bugs.launchpad.net/bugs/202068 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
