[Bug 1975566] Re: Unknown bug
Re-reading my previous post, I need to clarify. about 1) and 2): I tried to USB boot (normal) and it didn't work. I got many GUI hangs/crashes. After ~5-10 times I got fed up with it and tried a USB (safe) boot, which worked. Then I tried the USB (normal) boot again and it suddenly worked. about 3): if the GUI works, it hangs quickly but never in the same interval (probably crashes in the background) and does not recover. I seem to remember that sometimes even switching to a VT didn't work. I was surprised that remote SSH login worked, but reboots had to mostly be 'hard' eventually (e.g. the reboot command didn't completely finish). When the GUI hangs, the mousecursor is static and nothing can be done. Alt-tabbing also did not work. But, I found a workaround! I installed the "5.18.0-051800-generic" kernel from https://wiki.ubuntu.com/Kernel/MainlineBuilds and used this modprobe file with options: # disable the older 'radeon' kernel module blacklist radeon # disable audio options amdgpu audio=0 # magic options for my TAHITI R9 280X options amdgpu si_support=1 options amdgpu cik_support=1 options amdgpu dpm=0 options amdgpu aspm=0 options amdgpu runpm=0 options amdgpu bapm=0 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1975566 Title: Unknown bug To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1975566/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1975566] Re: radeon / amdgpu bad performance or panics
Here are logs from 3 separate type of boots (actually I had to reboot at least 20 times, because I had a lot of crashes/hangs): 1) USB safemode boot (since the normal USB boot didn't work ~ 5 times) 2) USB normal boot (it worked, don't know why, but I'm not complaining) 3) normal installed boot (could log in to GDM, but was not able to start a terminal. Had to switch to VT3 and back to get something useful from the system. Eventually I logged in via SSH. So I was not able to get glxinfo, hope the glxinfo from "2)" suffices.) ** Attachment added: "20220526_logs.zip" https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+attachment/5593151/+files/20220526_logs.zip -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1975566 Title: radeon / amdgpu bad performance or panics To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1975566] Re: radeon / amdgpu bad performance or panics
With the live USB stick, there are also Xorg issues. Even got a nice crash rapport. ** Attachment added: "_usr_lib_xorg_Xorg.127.crash" https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+attachment/5593009/+files/_usr_lib_xorg_Xorg.127.crash -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1975566 Title: radeon / amdgpu bad performance or panics To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1975566] Re: radeon / amdgpu bad performance or panics
Here's the vulkaninfo. I got lucky, since the entire GUI hung shortly after (don't think it's related to running this specific command though). Reverted the Wayland (GDM) change, so it's stock behaviour. And yes, I switched back to stock config and kernel. Will try to USB live version shortly. ** Attachment added: "vulkaninfosudo.txt" https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+attachment/5593007/+files/vulkaninfosudo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1975566 Title: radeon / amdgpu bad performance or panics To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1975566] Re: radeon / amdgpu bad performance or panics
Sorry for the late reply. tonight I installed the full ubuntu-desktop package (with a "clean" test user) and experienced crashes/hangs and other weird behaviour with the stock setup. When I disabled Wayland in GDM3, it got a little better, until that had issues as well. Note: I went from an 7+ year old Intel CPU -> AMD Ryzen CPU (GPU stayed the same) What kind of information is useful to provide including which logs? Would it help if I provided journalctl logs of with/without wayland and until the moment of the crash/hang? P.S. thanks for trying to help me out here -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1975566 Title: radeon / amdgpu bad performance or panics To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1975566] Re: radeon / amdgpu bad performance or panics
am currently using AwesomeWM ( https://awesomewm.org/ ) with LightDM. - when I ran the vulkaninfo this time, I temporarily switched back to 'stock' config (which is radeon, not amdgpu). So that might be correct. Should I switch to amdgpu and run it again? - between first post and now, I also switched back to the stock jammy kernel - thanks for the pointer about the compositor, didn't look into that yet. Checked and I didn't have a compositor installed (probably). So I installed "compton" as a compositor again (used it as well on my previous system), but that didn't help one bit (made it worse actually). So I uninstalled it again. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1975566 Title: radeon / amdgpu bad performance or panics To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1975566] Re: radeon / amdgpu bad performance or panics
Noticed something quite weird when using the default kernel module (radeon). - when running glxgears, it starts running normally, but stalls quickly. If I active movement (hightling a part of my terminal and moving the mouse around simultaneously), it seems to skyrocket and run normally. Until I stop moving my mouse (which highlightning a piece of the terminal), then it stops running again (5FPS, not being re-drawn). - When using Firefox, it appears to 'stall' regularly. But if I hide the window, it seems like the page is being processed (for example when visiting a site) and when I show the window again, it is updated. This does not happen when the window is being showed, it just appears to hang. Additional piece of info: I have a 4K 60hz monitor. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1975566 Title: radeon / amdgpu bad performance or panics To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1975566] Re: radeon / amdgpu bad performance or panics
** Attachment added: "lsmod.txt" https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+attachment/5592575/+files/lsmod.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1975566 Title: radeon / amdgpu bad performance or panics To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1975566] Re: radeon / amdgpu bad performance or panics
** Attachment added: "vulkaninfo.txt" https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+attachment/5592574/+files/vulkaninfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1975566 Title: radeon / amdgpu bad performance or panics To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1975566] Re: radeon / amdgpu bad performance or panics
** Attachment added: "glxinfo.txt" https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+attachment/5592573/+files/glxinfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1975566 Title: radeon / amdgpu bad performance or panics To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1975566] Re: radeon / amdgpu bad performance or panics
Already tried out some different things: - Tried the latest linux kernel - Fiddled with amdgpu & radeon kernel module options - Tried running the amdgpu kernel module instead of radeon Had to SSH into the machine to do anything (usually the system locks up). Some error messages from the fiddling: # kernel: [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, signaled seq=19833, emitted seq=19835 # kernel: [drm:amdgpu_job_timedout [amdgpu]] *ERROR* Process information: process Xorg pid 1758 thread Xorg:cs0 pid 1798 # kernel: [drm] Fence fallback timer expired on ring sdma1 # kernel: [drm] Fence fallback timer expired on ring gfx -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1975566 Title: radeon / amdgpu bad performance or panics To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1975566/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1975566] [NEW] radeon / amdgpu bad performance or panics
Public bug reported: Recently I upgraded my machine and moved my GPU over from the old (Intel something) to the new machine (AMD Ryzen 7 5700X, B550 motherboard). I did a fresh Ubuntu install (server) and added packages to get my GUI rolling (lightdm + awesomewm), just like before. The graphics cards is a "Gigabyte GV-R928XOC-3GD Rev. 2.0" which has the R9 280X chip (TAHITI / Southern Islands). On my old system, I could play games with Vulkan, but with this system it doesn't work. If I run the 'default' setup, it uses the 'radeon' kernel module. The first couple of seconds I get reasonable performance (glxgears @ 60 FPS), then it suddenly drop to 4 and motion is almost not visible). ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: xorg (not installed) Uname: Linux 5.18.0-051800-generic x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: pass Date: Tue May 24 06:49:56 2022 DistUpgraded: Fresh install DistroCodename: jammy DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X] [1002:6798] (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Tahiti XTL [Radeon R9 280X OC] [1458:3001] InstallationDate: Installed on 2022-05-14 (9 days ago) InstallationMedia: Ubuntu-Server 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220421) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.18.0-051800-generic root=/dev/mapper/ubuntu--vg-ubuntu--lv ro SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/25/2022 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: P2.30 dmi.board.name: B550 Phantom Gaming-ITX/ax dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvrP2.30:bd02/25/2022:br5.17:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnB550PhantomGaming-ITX/ax:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:skuToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.110-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 22.0.1-1ubuntu2 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.3-2ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-2build3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy performance ubuntu uec-images -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1975566 Title: radeon / amdgpu bad performance or panics To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1975566/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1947441] [NEW] oauth errors with TypeError
Public bug reported: when using offlineimap(3) to sync (in my case gmail) with oauth, it errors with the following: Traceback (most recent call last): File "/usr/share/offlineimap3/offlineimap/threadutil.py", line 146, in run Thread.run(self) File "/usr/lib/python3.9/threading.py", line 910, in run self._target(*self._args, **self._kwargs) File "/usr/share/offlineimap3/offlineimap/accounts.py", line 283, in syncrunner self.remoterepos = Repository(self, 'remote') File "/usr/share/offlineimap3/offlineimap/repository/__init__.py", line 77, in __new__ return repo(name, account) File "/usr/share/offlineimap3/offlineimap/repository/Gmail.py", line 35, in __init__ IMAPRepository.__init__(self, reposname, account) File "/usr/share/offlineimap3/offlineimap/repository/IMAP.py", line 43, in __init__ self.imapserver = imapserver.IMAPServer(self) File "/usr/share/offlineimap3/offlineimap/imapserver.py", line 108, in __init__ self.oauth2_refresh_token = repos.getoauth2_refresh_token() File "/usr/share/offlineimap3/offlineimap/repository/IMAP.py", line 426, in getoauth2_refresh_token refresh_token = refresh_token.strip("\n") TypeError: a bytes-like object is required, not 'str' It was also reported upstream and fixed there recently (August 3rd): https://github.com/OfflineIMAP/offlineimap3/issues/57 Looking at the package version number ( 0.0~git20210225.1e7ef9e+dfsg-4 ), it dates from February 2021. I assume updating the package to a more recent version will fix this issue. ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: offlineimap3 0.0~git20210225.1e7ef9e+dfsg-4 ProcVersionSignature: Ubuntu 5.13.0-19.19-generic 5.13.14 Uname: Linux 5.13.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu70 Architecture: amd64 CasperMD5CheckResult: unknown Date: Sat Oct 16 10:07:41 2021 InstallationDate: Installed on 2016-08-25 (1877 days ago) InstallationMedia: Ubuntu-MATE 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) PackageArchitecture: all SourcePackage: offlineimap3 UpgradeStatus: Upgraded to impish on 2021-10-16 (0 days ago) ** Affects: offlineimap3 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug impish -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1947441 Title: oauth errors with TypeError To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/offlineimap3/+bug/1947441/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1931301] Re: NIC unavailable after suspend to RAM
Have tested the linux-image-5.11.0-33-generic:amd64 5.11.0-33.35 from proposed and I can verify it fixed the issue for me. Switched back to the non-proposed 5.11.0-31 kernel and am looking forward to the new update. ** Tags removed: verification-needed-hirsute ** Tags added: verification-done-hirsute -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1931301 Title: NIC unavailable after suspend to RAM To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931301/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1931301] Re: NIC unavailable after suspend to RAM
Sure thing Chris, here's the dmesg log. Before I forget: thank you for helping me out here, I really appreciate it. ** Attachment added: "5.11.0-24-generic.dmesg.txt" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931301/+attachment/5510164/+files/5.11.0-24-generic.dmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1931301 Title: NIC unavailable after suspend to RAM To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931301/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1931301] Re: NIC unavailable after suspend to RAM
Did you change anything else in this kernel? Because it seemed to work correctly. ** Attachment added: "5.11.0-24-generic.dmesg.txt" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931301/+attachment/5509673/+files/5.11.0-24-generic.dmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1931301 Title: NIC unavailable after suspend to RAM To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931301/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1931301] Re: NIC unavailable after suspend to RAM
this went horribly wrong, since suspend itself did not work at all ;-) ( freezing of tasks failed after 20.010 seconds ) ** Attachment added: "5.13.0-051300-generic.dmesg.txt" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931301/+attachment/5509674/+files/5.13.0-051300-generic.dmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1931301 Title: NIC unavailable after suspend to RAM To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1931301/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1931301] [NEW] NIC unavailable after suspend to RAM
Public bug reported: Upgraded to 21.04 (hirsute) and now the network card is unavailable after suspend to RAM (sleep state S3). It worked flawlessly up until 20.10. My workaround for now is unloading and reloading the kernel module, but that won't work for normal users, hence this report. NIC in its unavailable state: 2: enp4s0: mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether d0:50:99:27:02:11 brd ff:ff:ff:ff:ff:ff NIC (from lspci): 04:00.0 Ethernet controller: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller (rev 10) Trying to ifconfig it down/up results in: SIOCSIFFLAGS: No such device journalctl shows (right after recovering from suspend): NetworkManager[1911]: [1623181236.9371] manager: sleep: wake requested (sleeping: yes enabled: yes) NetworkManager[1911]: [1623181236.9372] device (enp4s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external') NetworkManager[1911]: [1623181236.9382] manager: NetworkManager state is now CONNECTED_LOCAL ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: network-manager 1.30.0-1ubuntu3 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 CasperMD5CheckResult: unknown Date: Tue Jun 8 21:59:15 2021 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2016-08-25 (1748 days ago) InstallationMedia: Ubuntu-MATE 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) RfKill: SourcePackage: network-manager UpgradeStatus: Upgraded to hirsute on 2021-06-04 (4 days ago) nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.30.0 connected started full enabled enabled enabled enabled enabled ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug hirsute -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1931301 Title: NIC unavailable after suspend to RAM To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1931301/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1914438] [NEW] compiled without MPRIS
Public bug reported: cmus versions (2.8.0) in 20.04 and 20.10 seem to be compiled without mpris support. Please enable MPRIS support, so that (for example) playerctl can control this excellent audio player. ** Affects: cmus (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1914438 Title: compiled without MPRIS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cmus/+bug/1914438/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1729890] Re: reset full-speed usb device number
Apparently this happens when /tmp does not have exec. Remounting /tmp with exec provides a workaround. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1729890 Title: reset full-speed usb device number To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lcd4linux/+bug/1729890/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1729890] [NEW] reset full-speed usb device number
Public bug reported: On Ubuntu MATE 17.10 (artful) I found this bug when I tried to get my DPF LCD screen (connected via USB) working. I also tested my Ubuntu 17.10 MATE laptop install and I get the same result, so it is not a hardware issue. On my Debian stretch laptop, it works just fine. When I run 'lcd4linux -Fvvv' it fails with: lcd4linux.c: initializing driver DPF dpf_ax_open: found AX206 #1 dpf_ax_open: no matching USB device 'usb0' found! dpf: cannot open dpf device usb0 Error initializing driver DPF: Exit! meanwhile I can see the following in syslog: Nov 3 16:40:31 prometheus kernel: [73114.705716] usb 3-12.2: reset full-speed USB device number 88 using xhci_hcd Nov 3 16:40:31 prometheus kernel: [73114.835220] usb 3-12.2: USB disconnect, device number 88 Nov 3 16:40:31 prometheus kernel: [73114.929498] usb 3-12.2: new full-speed USB device number 89 using xhci_hcd Nov 3 16:40:31 prometheus kernel: [73115.067057] usb 3-12.2: New USB device found, idVendor=1908, idProduct=0102 Nov 3 16:40:31 prometheus kernel: [73115.067061] usb 3-12.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 Nov 3 16:40:31 prometheus kernel: [73115.067062] usb 3-12.2: Product: USB-Display Nov 3 16:40:31 prometheus kernel: [73115.067064] usb 3-12.2: Manufacturer: hackfin Nov 3 16:40:31 prometheus kernel: [73115.067065] usb 3-12.2: SerialNumber: 002 Nov 3 16:40:31 prometheus mtp-probe: checking bus 3, device 89: "/sys/devices/pci:00/:00:14.0/usb3/3-12/3-12.2" Nov 3 16:40:31 prometheus mtp-probe: bus: 3, device: 89 was not an MTP device Somehow a USB reset is triggered, which disconnects and reconnects the LCD screen, which in turn causes the device not to be found, since the USB ID is incremented. ** Affects: lcd4linux (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1729890 Title: reset full-speed usb device number To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lcd4linux/+bug/1729890/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 813167] [NEW] bluetoothd can not be started
Public bug reported: Ubuntu 11.04 (upgraded) with LXDE (formerly GNOME). When using blueman and trying to start bluetooth, it fails. That logical, since "/etc/init.d/bluetooth start" does not work (although it appears to). When the content of the 'start' statement is chanegd to the following, it works fine: if start-stop-daemon --start --quiet --oknodo --pidfile /var/run/bluetoothd.pid --exec $DAEMON ; then log_end_msg 0 else log_end_msg 1 fi ** Affects: bluez (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/813167 Title: bluetoothd can not be started To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/813167/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 372191] [NEW] Mounting certain iso/udf archives results in an added ; 1 to all filenames
Public bug reported: Binary package hint: gvfs OS: Ubuntu 9.04 (amd64) Kernel: 2.6.28-11-generic Symptoms: * Archives (iso/udf) mounted with gvfs, contain an added ';1' (semicolon one) to their files, but not their directories * When mounting the archive with mount, either with udf (default) or iso9660, everything works fine. * 'file' identifies the iso as: ISO 9660 CD-ROM filesystem data '936187_1565 ' (name differs of course) * file-roller exhibits the same ;1 behaviour * Not all iso/udf archives are affected. I witnessed this behaviour with a sles11 iso The bug can be reproduced: * Mount an iso/udf with archive-mounter and view the mounted archive * Open the archive with file-roller ** Affects: gvfs (Ubuntu) Importance: Undecided Status: New -- Mounting certain iso/udf archives results in an added ;1 to all filenames https://bugs.launchpad.net/bugs/372191 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 292963] Re: gvfs should have udf support
It is not a duplicate, but has ties with this bug https://bugs.launchpad.net/bugs/64383 (UDF not properly recognised). When you use archive-mounter to mount an image which has a UDF filesystem and an ISO filesystem, the ISO filesystem will be mounted, which results in a not usable mounted image. Archive-mounter uses gvfs to mount images. -- gvfs should have udf support https://bugs.launchpad.net/bugs/292963 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 64383] Re: UDF not properly recognised
This issue still exists in 9.04 (here: amd64) * File-roller and Archive-mounter (gvfs) only 'see' the README.TXT Workaround: Mount the image manually (with mount -o loop), works perfectly. -- UDF not properly recognised https://bugs.launchpad.net/bugs/64383 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 333355] [NEW] Evince requires access to /usr/share/applications/evince.desktop
Public bug reported: OS: Ubuntu Intrepid Evince version: 2.24.1 Evince should not require this access. Even if you put a local evince.desktop in your .local/share/applications, evince still requires access to the /usr/share/applications/evince.desktop. Other applications act normally, even without access to /usr/share/applications. Steps to reproduce: 1. chmod o-r /usr/share/applications/evince.desktop 2. start 'evince' Actual results: you will get this error: "Could not load desktop file '/usr/share/applications/evince.desktop': Permission denied Segmentation fault" Expected results: evince to work Does this happen every time? yes Bug has already been submitted upstream: http://bugzilla.gnome.org/show_bug.cgi?id=572858 ** Affects: evince (Ubuntu) Importance: Undecided Status: New ** Tags: evince intrepid -- Evince requires access to /usr/share/applications/evince.desktop https://bugs.launchpad.net/bugs/55 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 326130] Re: mysql-admin can not edit table data
** Changed in: mysql-admin (Ubuntu) Sourcepackagename: None => mysql-admin -- mysql-admin can not edit table data https://bugs.launchpad.net/bugs/326130 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 326130] [NEW] mysql-admin can not edit table data
Public bug reported: Affects: intrepid Package: mysql-admin Version: 5.0~rc12-2.2ubuntu2 Affected function: edit table data Upstream bugreport: http://bugs.mysql.com/bug.php?id=5009 Basically mysql-admin looks for the gconf data in the wrong place. It is already fixed upstream, maybe we can backport the fix? ** Affects: ubuntu Importance: Undecided Status: New ** Tags: gconf intrepid mysql mysql-admin -- mysql-admin can not edit table data https://bugs.launchpad.net/bugs/326130 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 325704] [NEW] gnome print dialog does not allow input for locked print / document server / user code
Public bug reported: Use-case: User Foo want to print document Bar. Document Bar contains some sensitive data, but needs to printed at one of the print-rooms down the hall. The user does not want anyone else to get his/her hands on these documents and wants to use the available PIN-number-security (which he needs to enter when he is physically at the printer). Description: If you try to set the PIN number, you can't. There is only a dropdown list with 3 values (defaults, defined in the PPD). The user should be allowed to enter this manually, instead of being shown the defaults. ** Affects: ubuntu Importance: Undecided Status: New ** Tags: gnome intrepid print printing -- gnome print dialog does not allow input for locked print / document server / user code https://bugs.launchpad.net/bugs/325704 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 325058] [NEW] Connect to server dialog (webdav) gives HTTP error
Public bug reported: OS: Intrepid - 2.6.27-11-generic Description: Connect to a password protected webdav (http) repository, using the 'connect to server' dialog gives the following error: "Error: HTTP Error: Moved Permanently Please select another viewer and try again." It should work, since Firefox and cadaver both work fine. If you use the "dav://servername.com/folder" link, you will be asked for a username and a password and it works fine. ** Affects: nautilus (Ubuntu) Importance: Undecided Status: New ** Tags: intrepid nautilus webdav -- Connect to server dialog (webdav) gives HTTP error https://bugs.launchpad.net/bugs/325058 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 321486] [NEW] cupsys-client/cupsaddsmb should depend on smbclient
Public bug reported: Currently cupsaddsmb (provided by cupsys-client) does not depend on smbclient. However if you use cupsaddsmb (by installing cupsys-client), it calls smbclient and gives numerous errors (due to the fact that smbclient is not installed). ** Affects: cupsys (Ubuntu) Importance: Undecided Status: New ** Changed in: cupsys (Ubuntu) Sourcepackagename: None => cupsys -- cupsys-client/cupsaddsmb should depend on smbclient https://bugs.launchpad.net/bugs/321486 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319267] [NEW] file open dialog resize issue
Public bug reported: OS: Ubuntu 8.10 (Intrepid) The issue occurs when you open the 'file open' dialog and resize it (for example to make it larger, because you are browsing a large directory). It resizes automatically when: * bookmarks (left side) are clicked * any files/folders are clicked (right side) * breadcrumbs are clicked (top) applications which seem affected: eye of gnome, firefox applications which don't seem affected: openoffice, gimp ** Affects: ubuntu Importance: Undecided Status: New -- file open dialog resize issue https://bugs.launchpad.net/bugs/319267 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 82615] Re: gnome-main-menu opens on wrong monitor
Confirmed with Gutsy. I am currently using a Nvidia dualscreen (seperate x session) setup and when I try to open the menu on the 2nd monitor, it appears on the 1st monitor. -- gnome-main-menu opens on wrong monitor https://bugs.launchpad.net/bugs/82615 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 139964] Re: [gutsy] Gnome Applications and Places contain wrong items
I have not double checked this, but I will take your word for it. I will change the status to "fix released" ** Changed in: gnome-menus (Ubuntu) Status: Incomplete => Fix Released -- [gutsy] Gnome Applications and Places contain wrong items https://bugs.launchpad.net/bugs/139964 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140821] Re: [gutsy] Can not change default GNOME splash background color
Manually changing the color in /etc/gdm/PreSession/Default works. Thanks dremon! In Feisty the color is not defined there, but in Gutsy it is there hardcoded. I'll leave this bug open, since it is not working (yet) as intended. ** Changed in: gdm (Ubuntu) Sourcepackagename: None => gdm -- [gutsy] Can not change default GNOME splash background color https://bugs.launchpad.net/bugs/140821 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 139964] Re: [gutsy] Gnome Applications and Places contain wrong items
If I add a new user to the system, I don't have any 'useless' entries in the Other menu anymore. Any tips on how I can fix the current problem? When the new user logs in, the Places menu contains duplicate entries for: Desktop, Documents -- [gutsy] Gnome Applications and Places contain wrong items https://bugs.launchpad.net/bugs/139964 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140821] Re: [gutsy] Can not change default GNOME splash background color
Nanley, no worries and you can not test *every* bug you encounter. Luckily this is one of those bugs which can be easily/quickly tested. "Should we file this bug to gdm?" - That is the question I'm asking myself too. I thinks it is a GNOME bug, since the GDM window disappears and then the bug appears (so you are actually in the GNOME environment). It could also be a GDM color setting which GNOME just uses, but that is less likely in my opinion. -- [gutsy] Can not change default GNOME splash background color https://bugs.launchpad.net/bugs/140821 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 139964] Re: [gutsy] Gnome Applications and Places contain wrong items
The problem is still there, I still have a duplicate "Desktop" entry in the Places menu and the Applications -> Other is still messed up. (at least on my machine it is) -- [gutsy] Gnome Applications and Places contain wrong items https://bugs.launchpad.net/bugs/139964 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 139958] Re: Intel 915GM/GMS/910ML and compiz in Gutsy have no decorations
** Changed in: compiz (Ubuntu) Status: Incomplete => Invalid -- Intel 915GM/GMS/910ML and compiz in Gutsy have no decorations https://bugs.launchpad.net/bugs/139958 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140821] Re: [gutsy] Can not change default GNOME splash background color
"a black solid fill background with a dark wallpaper" means that I have selected a wallpaper and a black color. I've just checked (once again) System > Administration > Login Windows > Local tab and it _is_ set to black. So this is a bug and not a support question. Apparently Ron is having the same issue. -- [gutsy] Can not change default GNOME splash background color https://bugs.launchpad.net/bugs/140821 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 140821] [gutsy] Can not change default GNOME splash background color
Public bug reported: Before I start, let me say this. I have a dark GDM theme, a black solid fill background with a dark wallpaper. I've set the GDM login screen to black as well and I've even edited /etc/gdm/gdm.conf. I've already gotten the 'use Ray-Bans' remark in #ubuntu+1 ;) and the tip to file bug, so here it is. What happens when I log in from the GDM? The GDM disappears, a bright yellow/brown color fills the screen, my custom splash screen is shown while components are loaded (the background is still yellow/brown), the splash screen disappears while my settings and custom desktop are shown. Finally everything is dark again. The brown/yellowish color must be defined somewhere and should be editable, but where? It appears to be a downstream issue according to someone in #GNOME (haven't confirmed this though). ** Affects: ubuntu Importance: Undecided Status: New -- [gutsy] Can not change default GNOME splash background color https://bugs.launchpad.net/bugs/140821 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 139958] Re: Intel 915GM/GMS/910ML and compiz in Gutsy have no decorations
Perhaps some old settings remained from an old beryl installation, enabling the decorations worked. Such a function should never be an option, but should always be enabled ;) Status: Fixed -- Intel 915GM/GMS/910ML and compiz in Gutsy have no decorations https://bugs.launchpad.net/bugs/139958 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 139958] Intel 915GM/GMS/910ML and compiz in Gutsy have no decorations
Public bug reported: I have a HP nx6110 laptop (using the Intel driver, not the i810 driver) and the current Gutsy version (yes, I have all current updates) does not seem to like my Intel 915GM/GMS/910ML chipset. If I enable compiz through System -> Preferences -> Appearance -> Desktop Effects -> Normal/Extra effects, the decorations disappear, the cube works, alt-tab works but I don't get any 'new' decorations. So I have to revert to "No effects" at this moment, because otherwise I am unable to move and resize windows. "glxinfo | grep direct" gives me "direct rendering: Yes" Note: if i do "compiz --replace" I get: Checking for Xgl: not present. Checking for texture_from_pixmap: not present. Trying again with indirect rendering: Checking for texture_from_pixmap: present. Checking for non power of two support: present. Checking for Composite extension: present. Checking for nVidia: not present. Checking for Xgl: not present. Starting gtk-window-decorator ** Affects: compiz (Ubuntu) Importance: Undecided Status: New -- Intel 915GM/GMS/910ML and compiz in Gutsy have no decorations https://bugs.launchpad.net/bugs/139958 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 139964] [gutsy] Gnome Applications and Places contain wrong items
Public bug reported: I have dist-upgraded yesterday at about 13.00 UTC and some Gnome menu items were wrongfully added. Applications -> Other -> Contain a lot of 'dead' items which get the error: Failed to execute child process "/usr/bin/xlock" (No such file or directory). It is very strange since these 'dead' menu items have names like: Abiword, Adobe Reader, Anemone, Ant, Apollonian, aptitude xvncviewer, yelp. Places -> contains (in this order): Home Folder, Documents, Desktop, Documents, Music, Pictures, Videos, Desktop (Desktop and Documents has been included twice) ** Affects: gnome-menus (Ubuntu) Importance: Undecided Status: New -- [gutsy] Gnome Applications and Places contain wrong items https://bugs.launchpad.net/bugs/139964 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 128793] Notification area breaks on secondary monitor (nvidia)
Public bug reported: Binary package hint: gnome-panel On my first monitor everything seems fine when I start apps like gaim etc. which show up in the notification area. On my secondary monitor the notification area doesn't work at all (but IS added to the panel). Even if I use 'alltray', it confirms that I have no notification area on my 2nd monitor. The strange thing is, I can 'see' that I've added a notification area (it looks the same as on my main monitor, except for the fact that no icons show up). Note: I'm NOT using Beryl/Compiz at the moment. Distribution: Ubuntu Feisty (7.04) Kernel: 2.6.20-16-generic Graphics: Nvidia GeForce 6600GT Drivers: nvidia (binary drivers from the repository) Config: Seperate X sessions (NO TwinView/XInerama) Bugs that seem to have the same issue, but are somehow not applicable: https://bugs.launchpad.net/ubuntu/+bug/122295 (no dual screen issue) https://bugs.launchpad.net/ubuntu/+source/gnome-panel/+bug/12696 (too old and new bug reports should be filed in stead of using this one) https://bugs.launchpad.net/ubuntu/+source/gnome-panel/+bug/128735 (uses 2 separate graphic cards) ** Affects: gnome-panel (Ubuntu) Importance: Undecided Status: New -- Notification area breaks on secondary monitor (nvidia) https://bugs.launchpad.net/bugs/128793 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 122295] Re: Notification Area doesn't work
I can (more or less) confirm this bug, since I have it too, but ONLY on my secondary monitor. On my first monitor everything seems fine when I start apps like gaim etc. which show up in the notification area. Even if I use 'alltray', it confirms that I have no notification area on my 2nd monitor. The strange thing is, I can 'see' that I've added a notification area (it looks the same as on my main monitor, except for the fact that no icons show up). Distribution: Ubuntu Feisty (7.04) Graphics: Nvidia GeForce 6600GT Drivers: nvidia (binary drivers) Config: Seperate X sessions (NO TwinView/XInerama) -- Notification Area doesn't work https://bugs.launchpad.net/bugs/122295 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 121879] libapache2-mod-ngobjweb installs, but apache fails to start
Public bug reported: Package: libapache2-mod-ngobjweb Source: sope Version: 4.4rc.2-3.1 The package installs fine, but breaks the apache2 config file with this error: "apache2: Syntax error on line 185 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/ngobjweb.load: Cannot load /usr/lib/apache2/modules/mod_ngobjweb.so into server: /usr/lib/apache2/modules/mod_ngobjweb.so: undefined symbol: ap_run_http_method" ** Affects: apache2 (Ubuntu) Importance: Undecided Status: New -- libapache2-mod-ngobjweb installs, but apache fails to start https://bugs.launchpad.net/bugs/121879 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 81170] Re: [feisty] etodo conduit times out when syncing with a palm device
I also confirm this bug for the Palm Zire connected via USB on a Feisty machine. The bug is clearly in the EToDo synching process (disabling it or setting a due date to each todo item, seems to solve problem). I have not tested it extensively. -- [feisty] etodo conduit times out when syncing with a palm device https://bugs.launchpad.net/bugs/81170 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 93503] Fluxbox - Tabs can not be disabled
Public bug reported: Binary package hint: fluxbox Distribution: Ubuntu Edgy (6.10) Fluxbox version: 1.0rc2 The tabs in fluxbox can't be disabled. This should be possible by setting "session.tabs" to "False" in the .fluxbox/init file, yet this doesn't work and the tabs are still shown. Temporary solution: Set "session.screenX.tabs.intitlebar" to "True" so you at least don't see them anymore. But the functionality is still there, while it shouldn't be. ** Affects: fluxbox (Ubuntu) Importance: Undecided Status: Unconfirmed -- Fluxbox - Tabs can not be disabled https://launchpad.net/bugs/93503 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 91508] [madwifi] 3Com 3CRXJK10075 PCMCIA (Atheros chipset) does not associate with WPA2 or WPA AP's
Public bug reported: Unfortunately my new 3Com 3CRXJK10075 card does not work with madwifi with WPA/WPA2 AP's (although it should work). WEP/Unencrypted AP's yet untested! I'll give some information: Distribution: Ubuntu 6.10 (Edgy) modinfo ath_pci version: 0.9.2.1 Kernel version: 2.6.17-11-386 Wireless protocol: WPA2/Personal (so no RADIUS server) Hardware: * 3Com card 3CRXJK10075 (PCMCIA card) * Linksys WAP54G * Broadcom BCM4318 internal chipset (used with ndiswrapper and works - used for testing the AP's connectivity) Part of the wpa_supplicant log with my 3Com 3CRXJK10075: BSSID 10:23:41:91:0F:11 blacklist count incremented to 2 State: ASSOCIATING -> DISCONNECTED WEXT: Operstate: linkmode=-1, operstate=5 No keys have been configured - skip key clearing EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 Setting scan request: 0 sec 0 usec State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=8 Received 561 bytes of scan results (3 BSSes) Scan results: 3 Selecting BSS from priority group 0 0: 10:23:41:91:0F:11 ssid='STFU' wpa_ie_len=0 rsn_ie_len=22 caps=0x11 skip - blacklisted 1: 01:02:d1:0d:37:72 ssid='Josh' wpa_ie_len=26 rsn_ie_len=0 caps=0x11 skip - SSID mismatch 2: 23:23:23:53:32:31 ssid='default' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - no WPA/RSN IE No APs found - clear blacklist and try again Removed BSSID 10:23:41:91:0F:11 from blacklist (clear) Selecting BSS from priority group 0 0: 10:23:41:91:0F:11 ssid='STFU' wpa_ie_len=0 rsn_ie_len=22 caps=0x11 selected based on RSN IE Trying to associate with 10:23:41:91:0F:11 (SSID='STFU' freq=2462 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 RSN: using IEEE 802.11i/D9.0 WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 WPA: clearing AP WPA IE WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 WPA: using GTK CCMP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 No keys have been configured - skip key clearing wpa_driver_wext_set_drop_unencrypted State: SCANNING -> ASSOCIATING WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_wext_associate Setting authentication timeout: 10 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RSN: Ignored PMKID candidate without preauth flag Wireless event: cmd=0x8b06 len=8 Wireless event: cmd=0x8b04 len=12 Wireless event: cmd=0x8b1a len=12 Ignore event for foreign ifindex 5 Ignore event for foreign ifindex 5 Authentication with 00:00:00:00:00:00 timed out. Added BSSID 10:23:41:91:0F:11 into blacklist State: ASSOCIATING -> DISCONNECTED WEXT: Operstate: linkmode=-1, operstate=5 No keys have been configured - skip key clearing EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 Setting scan request: 0 sec 0 usec State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Ignore event for foreign ifindex 5 Ignore event for foreign ifindex 5 Wireless event: cmd=0x8b19 len=8 Received 561 bytes of scan results (3 BSSes) Scan results: 3 Selecting BSS from priority group 0 0: 10:23:41:91:0F:11 ssid='STFU' wpa_ie_len=0 rsn_ie_len=22 caps=0x11 selected based on RSN IE Trying to associate with 10:23:41:91:0F:11 (SSID='STFU' freq=2462 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 RSN: using IEEE 802.11i/D9.0 WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 WPA: clearing AP WPA IE WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 WPA: using GTK CCMP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 No keys have been configured - skip key clearing wpa_driver_wext_set_drop_unencrypted State: SCANNING -> ASSOCIATING WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_wext_associate Setting authentication timeout: 10 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RSN: Ignored PMKID candidate without preauth flag Wireless event: cmd=0x8b06 len=8 Wireless event: cmd=0x8b04 len=12 Wireless event: cmd=0x8b1a len=12 Authentication with 00:00:00:00:00:00 timed out. BSSID 10:23:41:91:0F:11 blacklist count incremented to 2 State: ASSOCIATING -> DISCONNECTED WEXT: Operstate: linkmode=-1, operstate=5 No keys have been configured - skip key clearing EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 Setting scan request: 0 sec 0 usec State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Wireless event: cmd=0x8b19 len=8 Received