[Bug 433943] Re: kernel boot broken: init: udevtrigger mainprocess (1283) terminated with status 1
@Alberto Your solution is quit good! I met it when I interrupt a 'apt-get upgrade', then it dropped me to no login. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/433943 Title: kernel boot broken: init: udevtrigger mainprocess (1283) terminated with status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/udev/+bug/433943/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 839541] Re: mx51evk can't find rootfs by UUID, LABEL or device node, then drop to initramfs
The bug is found from 11.08 release, a try after bug 839539, it's not a formal test step, can focus on bug 839539 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/839541 Title: mx51evk can't find rootfs by UUID, LABEL or device node, then drop to initramfs To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-linaro-mx51/+bug/839541/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 839539] Re: mx51evk can't load uImage and dtd from mmc card
I mentioned it failed on 11.08 milestone release, it's: hwpack_linaro-imx51_20110823-0_armel_unsupported.tar.gz nano-n-tar-20110823-1.tar.gz manual loading also failed. log U-Boot 2011.06 (Aug 19 2011 - 17:16:36) CPU: Freescale i.MX51 family rev3.0 at 800 MHz Reset cause: POR Board: MX51EVK DRAM: 512 MiB MMC: FSL_ESDHC: 0, FSL_ESDHC: 1 *** Warning - bad CRC, using default environment In:serial Out: serial Err: serial Net: got MAC address from fuse: 00:04:9f:01:06:9f FEC Hit any key to stop autoboot: 0 MX51EVK U-Boot > mmc rescan 0 MX51EVK U-Boot > fatload mmc 0:2 0x9080 uImage ** Unable to use mmc 0:2 for fatload ** MX51EVK U-Boot > print baudrate=115200 bootcmd=if mmc rescan ${mmcdev}; then if run loadbootscript; then run bootscript; else if run loaduimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi bootdelay=3 bootscript=echo Running bootscript from mmc ...; source ethact=FEC loadaddr=0x9080 loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script}; loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage} mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot} rootfstype=${mmcrootfstype} mmcboot=echo Booting from mmc ...; run mmcargs; bootm mmcdev=0 mmcpart=2 mmcroot=/dev/mmcblk0p3 rw mmcrootfstype=ext3 rootwait netargs=setenv bootargs console=ttymxc0,${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp netboot=echo Booting from net ...; run netargs; dhcp ${uimage}; bootm script=boot.scr stderr=serial stdin=serial stdout=serial uimage=uImage Environment size: 942/8188 bytes MX51EVK U-Boot > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/839539 Title: mx51evk can't load uImage and dtd from mmc card To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-linaro-mx51/+bug/839539/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 839541] Re: mx51evk can't find rootfs by UUID, LABEL or device node, then drop to initramfs
** Tags added: mx51 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/839541 Title: mx51evk can't find rootfs by UUID, LABEL or device node, then drop to initramfs To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-linaro-mx51/+bug/839541/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 754254] Re: imx51 randomly truncates serial input at 31 characters
Can't verify on 11.08 release for severe bug: # 839539, After changing an old uboot, meet severe bug: #839541, In initramfs environment, no such bug, but I don't think it makes sense :( -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/754254 Title: imx51 randomly truncates serial input at 31 characters To manage notifications about this bug go to: https://bugs.launchpad.net/linux-linaro/+bug/754254/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 839541] [NEW] mx51evk can't find rootfs by UUID, LABEL or device node, then drop to initramfs
Public bug reported: Use an old uboot to bootup, find UUID, LABEL, device node rootfs can't be found. Environment: 11.08 release Log: Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... [1.637092] hub 1-1:1.0: USB hub found [1.699904] hub 1-1:1.0: 7 ports detected Begin: Running /scripts/local-top ... done. [4.935483] usb 1-1.6: new high speed USB device number 3 using mxc-ehci Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/disk/by-uuid/1146c852-2afa-443a-93cf-015a33ec3b10 does not exist. Dropping to a shell! BusyBox v1.17.1 (Ubuntu 1:1.17.1-10ubuntu1) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) ** Affects: linux-linaro-mx51 (Ubuntu) Importance: Undecided Status: New ** Tags: mx51 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/839541 Title: mx51evk can't find rootfs by UUID, LABEL or device node, then drop to initramfs To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-linaro-mx51/+bug/839541/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 839539] [NEW] mx51evk can't load uImage and dtd from mmc card
Public bug reported: Environment: 11.08 release Log: U-Boot 2011.06 (Aug 19 2011 - 17:16:36) CPU: Freescale i.MX51 family rev3.0 at 800 MHz Reset cause: POR Board: MX51EVK DRAM: 512 MiB MMC: FSL_ESDHC: 0, FSL_ESDHC: 1 *** Warning - bad CRC, using default environment In:serial Out: serial Err: serial Net: got MAC address from fuse: 00:04:9f:01:06:9f FEC Hit any key to stop autoboot: 0 ** Unable to use mmc 0:2 for fatload ** ** Unable to use mmc 0:2 for fatload ** Booting from net ... BOOTP broadcast 1 ** Affects: linux-linaro-mx51 (Ubuntu) Importance: Undecided Status: New ** Tags: mx51 ** Tags added: mx51 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/839539 Title: mx51evk can't load uImage and dtd from mmc card To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-linaro-mx51/+bug/839539/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 789610] Re: [imx53loco] audio capture can not work
Pass on: hwpack_linaro-lt-mx53loco_20110616-0_armel_supported.tar.gz linaro-natty-nano-tar-20110619-0.tar.gz -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/789610 Title: [imx53loco] audio capture can not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-linaro-mx51/+bug/789610/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 801434] Re: [imx53loco] sometimes "mmcblk0: error -110 sending status comand" like messages come out after boot up
** Tags added: mx53 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/801434 Title: [imx53loco] sometimes "mmcblk0: error -110 sending status comand" like messages come out after boot up To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-linaro-mx51/+bug/801434/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 801434] [NEW] [imx53loco] sometimes "mmcblk0: error -110 sending status comand" like messages come out after boot up
Public bug reported: Description: With a low possibility, kernel dump information and mmc remounted as read-only some time after boot up Environment: hwpack_linaro-lt-mx53loco_20110616-0_armel_supported.tar.gz linaro-natty-nano-tar-20110619-0.tar.gz Logs: root@linaro:~# mmcblk0: error -110 sending status comand mmcblk0: error -84 transferring data, sector 7704240, nr 8, card status 0x0 mmcblk0: error -110 sending stop command, response 0x0, card status 0x0 mmcblk0: error -110 requesting status end_request: I/O error, dev mmcblk0, sector 7704240 Buffer I/O error on device mmcblk0p3, logical block 948694 mmcblk0: error -110 sending status comand mmcblk0: error -110 sending read/write command, response 0x0, card status 0x0 mmcblk0: error -110 requesting status end_request: I/O error, dev mmcblk0, sector 7704312 Buffer I/O error on device mmcblk0p3, logical block 948703 mmcblk0: error -110 sending status comand mmcblk0: error -110 sending read/write command, response 0x0, card status 0x0 mmcblk0: error -110 requesting status end_request: I/O error, dev mmcblk0, sector 3529928 end_request: I/O error, dev mmcblk0, sector 3529936 Aborting journal on device mmcblk0p3. mmcblk0: error -110 sending status comand mmcblk0: error -110 sending read/write command, response 0x0, card status 0x0 EXT3-fs (mmcblk0p3): error: ext3_journal_start_sb: Detected aborted journal EXT3-fs (mmcblk0p3): error: remounting filesystem read-only mmcblk0: error -110 requesting status end_request: I/O error, dev mmcblk0, sector 3526552 Buffer I/O error on device mmcblk0p3, logical block 426483 mmcblk0: error -110 sending status comand mmcblk0: error -110 sending read/write command, response 0x0, card status 0x0 mmcblk0: error -110 requesting status end_request: I/O error, dev mmcblk0, sector 7704240 Buffer I/O error on device mmcblk0p3, logical block 948694 mmcblk0: error -110 sending status comand mmcblk0: error -110 sending read/write command, response 0x0, card status 0x0 mmcblk0: error -110 requesting status end_request: I/O error, dev mmcblk0, sector 7704312 Buffer I/O error on device mmcblk0p3, logical block 948703 ** Affects: linux-linaro-mx51 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/801434 Title: [imx53loco] sometimes "mmcblk0: error -110 sending status comand" like messages come out after boot up To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-linaro-mx51/+bug/801434/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 754254] Re: imx51 randomly truncates serial input at 31 characters
Confirmed Shawn's discovery: slot2 SD lowers the issue possibility. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/754254 Title: imx51 randomly truncates serial input at 31 characters To manage notifications about this bug go to: https://bugs.launchpad.net/linux-linaro/+bug/754254/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 789620] [NEW] [imx53loco] GUI app "System Testing" causes VGA output blank
Public bug reported: In 11.05 final release: hwpack_linaro-lt-mx53loco_20110526-1_armel_supported.tar.gz linaro-n-ubuntu-desktop-tar-20110526-0.tar.gz Run GUI app "System Testing", it causes VGA output blank after some minutes, and print kernel messages: msg.data 1= 0 msg.data2 = 28 msg.data3 = 0 msg.data 1= 52 msg.data2 = 28 msg.data3 = 52 There is a hint on the screen that the mode is not supported. ** Affects: linux-linaro-mx51 (Ubuntu) Importance: Undecided Status: New ** Tags: mx53 ** Tags added: mx53 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/789620 Title: [imx53loco] GUI app "System Testing" causes VGA output blank -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 789610] Re: [imx53loco] audio capture can not work
** Tags added: mx53 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/789610 Title: [imx53loco] audio capture can not work -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 789610] [NEW] [imx53loco] audio capture can not work
Public bug reported: In 11.05 final release: hwpack_linaro-lt-mx53loco_20110526-1_armel_supported.tar.gz linaro-n-ubuntu-desktop-tar-20110526-0.tar.gz No sound when playback recorded files: # arecord -f S16_LE -d 10 -r 44100 cap44k16S.wav && aplay cap44k16S.wav ** Affects: linux-linaro-mx51 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/789610 Title: [imx53loco] audio capture can not work -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 761507] Re: [imx53loco] No video output on VGA port
vga output works with uboot cmdline "di1_primary tve" -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/761507 Title: [imx53loco] No video output on VGA port -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 761507] Re: [imx53loco] No video output on VGA port
** Tags added: mx53 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/761507 Title: [imx53loco] No video output on VGA port -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 763702] Re: [imx53loco] Can not resume system from mem mode
It's ok in 11.05 final release: hwpack_linaro-lt-mx53loco_20110526-1_armel_supported.tar.gz linaro-n-ubuntu-desktop-tar-20110526-0.tar.gz ** Tags added: mx53 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/763702 Title: [imx53loco] Can not resume system from mem mode -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 764248] Re: [imx53loco] CPU frequency should be 1GHz when boot up
** Tags added: mx53 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/764248 Title: [imx53loco] CPU frequency should be 1GHz when boot up -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 787722] Re: [imx53loco] system stop after DA9052 detection when boot up sometimes 'reboot'
** Tags added: mx53 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/787722 Title: [imx53loco] system stop after DA9052 detection when boot up sometimes 'reboot' -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 764248] Re: [imx53loco] CPU frequency should be 1GHz when boot up
It's 1GHz in 11.05 final release: hwpack_linaro-lt-mx53loco_20110526-1_armel_supported.tar.gz linaro-n-ubuntu-desktop-tar-20110526-0.tar.gz -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/764248 Title: [imx53loco] CPU frequency should be 1GHz when boot up -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 787722] [NEW] [imx53loco] system stop after DA9052 detection when boot up sometimes 'reboot'
Public bug reported: System stop after DA9052 detection when boot up sometimes after 'reboot', wait a long time but it won't proceed. Environment: linaro-natty-nano-tar-20110503-0.tar.gz hwpack_linaro-lt-mx53loco_20110503-0_armel_supported.tar.gz Logs: CPU is i.MX53 Revision 2.0 Using SDMA I.API MXC DMA API initialized IMX usb wakeup probe IMX usb wakeup probe bio: create slab at 0 SCSI subsystem initialized Freescale USB OTG Driver loaded, $Revision: 1.55 $ usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb da9052_i2c_is_connected - i2c read success.. regulator: DA9052_LDO1: 600 <--> 1800 mV at 1300 mV normal regulator: DA9052_LDO2: 600 <--> 1800 mV at 1300 mV normal regulator: DA9052_LDO3: 1725 <--> 3300 mV at 3300 mV normal regulator: DA9052_LDO4: 1725 <--> 3300 mV at 2775 mV normal regulator: DA9052_LDO5: 1200 <--> 3600 mV at 1300 mV normal regulator: DA9052_LDO6: 1200 <--> 3600 mV at 1300 mV normal regulator: DA9052_LDO7: 1200 <--> 3600 mV at 2750 mV normal regulator: DA9052_LDO8: 1200 <--> 3600 mV at 1800 mV normal regulator: DA9052_LDO9: 1250 <--> 3650 mV at 2500 mV normal regulator: DA9052_LDO10: 1200 <--> 3600 mV at 1300 mV normal regulator: DA9052_BUCK_CORE: 500 <--> 2075 mV at 1100 mV normal regulator: DA9052_BUCK_PRO: 500 <--> 2075 mV at 1300 mV normal regulator: DA9052_BUCK_MEM: 925 <--> 2500 mV at 1500 mV normal regulator: DA9052_BUCK_PERI: 1800 <--> 3600 mV at 3600 mV normal ** Affects: linux-linaro-mx51 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/787722 Title: [imx53loco] system stop after DA9052 detection when boot up sometimes 'reboot' -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 754254] Re: imx51 randomly truncates serial input at 31 characters
Generally, mx53 is far better on the issue. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/754254 Title: imx51 randomly truncates serial input at 31 characters -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 754254] Re: imx51 randomly truncates serial input at 31 characters
occasionally I found the issue exist on mx53loco too, but the possibility is low -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/754254 Title: imx51 randomly truncates serial input at 31 characters -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 764248] [NEW] [imx53loco] CPU frequency should be 1GHz when boot up
Public bug reported: Environment: hwpack_linaro-lt-mx53loco_20110414-0_armel_supported.tar.gz linaro-n-ubuntu-desktop-tar-20110414-0.tar.gz CPU frequency should be 1GHz when boot up on i.MX53 loco, but now it is 800MHz ** Affects: linux-linaro-mx51 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/764248 Title: [imx53loco] CPU frequency should be 1GHz when boot up -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 763702] [NEW] [imx53loco] Can not resume system from mem mode
Public bug reported: Environment: hwpack_linaro-lt-mx53loco_20110414-0_armel_supported.tar.gz linaro-n-ubuntu-desktop-tar-20110414-0.tar.gz # echo mem > /sys/power/state Press PWR button, can't resume. ** Affects: linux-linaro-mx51 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/763702 Title: [imx53loco] Can not resume system from mem mode -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 761507] [NEW] [imx53loco] No video output on VGA port
Public bug reported: Environment: hwpack_linaro-lt-mx53loco_20110414-0_armel_supported.tar.gz linaro-n-ubuntu-desktop-tar-20110414-0.tar.gz Boot up and no video out on VGA port. ** Affects: linux-linaro-mx51 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/761507 Title: [imx53loco] No video output on VGA port -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 755209] [NEW] kernel trace info appears during network probing up in dma-debug.c
Public bug reported: Environment: hwpack: hwpack_linaro-imx51_20110407-0_armel_unsupported.tar.gz affected HW: imx51evk Steps: 1. run dmesg to see kernel message after bootup Logs: $ dmesg|tail -100 [6.42] EXT3-fs (mmcblk0p3): using internal journal [7.14] udev[201]: starting version 167 [8.90] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 11.04] usbcore: registered new interface driver uas [ 14.06] lp: driver loaded but no devices found [ 14.50] ppdev: user-space parallel port driver [ 15.29] type=1400 audit(15.289:2): apparmor="STATUS" operation="profile_l oad" name="/usr/lib/cups/backend/cups-pdf" pid=400 comm="apparmor_parser" [ 15.34] type=1400 audit(15.339:3): apparmor="STATUS" operation="profile_l oad" name="/usr/sbin/cupsd" pid=400 comm="apparmor_parser" [ 25.61] type=1400 audit(25.609:4): apparmor="STATUS" operation="profile_l oad" name="/sbin/dhclient" pid=246 comm="apparmor_parser" [ 25.65] type=1400 audit(25.649:5): apparmor="STATUS" operation="profile_l oad" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=246 comm="apparmor _parser" [ 25.65] type=1400 audit(25.649:6): apparmor="STATUS" operation="profile_l oad" name="/usr/lib/connman/scripts/dhclient-script" pid=246 comm="apparmor_pars er" [ 26.15] type=1400 audit(26.149:7): apparmor="STATUS" operation="profile_r eplace" name="/sbin/dhclient" pid=364 comm="apparmor_parser" [ 26.15] type=1400 audit(26.149:8): apparmor="STATUS" operation="profile_r eplace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=364 comm="appar mor_parser" [ 26.15] type=1400 audit(26.149:9): apparmor="STATUS" operation="profile_r eplace" name="/usr/lib/connman/scripts/dhclient-script" pid=364 comm="apparmor_p arser" [ 26.52] type=1400 audit(26.519:10): apparmor="STATUS" operation="profile_ replace" name="/sbin/dhclient" pid=360 comm="apparmor_parser" [ 26.52] type=1400 audit(26.519:11): apparmor="STATUS" operation="profile_ replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=360 comm="appa rmor_parser" [ 26.53] type=1400 audit(26.529:12): apparmor="STATUS" operation="profile_ replace" name="/usr/lib/connman/scripts/dhclient-script" pid=360 comm="apparmor_ parser" [ 27.42] type=1400 audit(27.419:13): apparmor="STATUS" operation="profile_ replace" name="/sbin/dhclient" pid=380 comm="apparmor_parser" [ 29.91] eth0: Freescale FEC PHY driver [SMSC LAN8700] (mii_bus:phy_addr=1 :00, irq=-1) [ 29.91] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.48] audit_printk_skb: 6 callbacks suppressed [ 31.48] type=1400 audit(31.479:16): apparmor="STATUS" operation="profile_ load" name="/usr/share/gdm/guest-session/Xsession" pid=561 comm="apparmor_parser " [ 31.91] PHY: 1:00 - Link is Up - 100/Full [ 31.91] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 32.25] [ cut here ] [ 32.25] WARNING: at /build/buildd/linux-linaro-mx51-2.6.38/lib/dma-debug. c:803 check_unmap+0x18c/0x728() [ 32.25] NULL NULL: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0xaeea5040] [size=64 bytes] [ 32.25] Modules linked in: ppdev lp parport uas gpio_keys [ 32.25] Backtrace: [ 32.25] [] (dump_backtrace+0x0/0x110) from [] (dump_s tack+0x18/0x1c) [ 32.25] r6:c04c4f57 r5:0323 r4:decd3bb8 r3:fdcd5f1e [ 32.25] [] (dump_stack+0x0/0x1c) from [] (warn_slowpa th_common+0x54/0x6c) [ 32.25] [] (warn_slowpath_common+0x0/0x6c) from [] (w arn_slowpath_fmt+0x38/0x40) [ 32.25] r8:0002 r7:800f0193 r6:c058ce9c r5: r4:decd3c20
[Bug 755205] Re: [imx51evk] no sound card found on 11.05 0407 weekly
** Description changed: Environment: hwpack: hwpack_linaro-imx51_20110407-0_armel_unsupported.tar.gz - root@linaro:~# cat /proc/version + HW: imx51evk + root@linaro:~# cat /proc/version Linux version 2.6.38-1001-linaro-mx51 (buildd@hubbard) (gcc version 4.5.2 (Ubunt - u/Linaro 4.5.2-6ubuntu4) ) #2-Ubuntu Mon Mar 21 22:00:18 UTC 2011 + u/Linaro 4.5.2-6ubuntu4) ) #2-Ubuntu Mon Mar 21 22:00:18 UTC 2011 - root@linaro:~# aplay -l - aplay: device_list:240: no soundcards found... + root@linaro:~# aplay -l + aplay: device_list:240: no soundcards found... Also, the kernel in 0407 weekly release is old to Mar.21, or is there no source code change? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/755205 Title: [imx51evk] no sound card found on 11.05 0407 weekly -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 755205] [NEW] [imx51evk] no sound card found on 11.05 0407 weekly
Public bug reported: Environment: hwpack: hwpack_linaro-imx51_20110407-0_armel_unsupported.tar.gz root@linaro:~# cat /proc/version Linux version 2.6.38-1001-linaro-mx51 (buildd@hubbard) (gcc version 4.5.2 (Ubunt u/Linaro 4.5.2-6ubuntu4) ) #2-Ubuntu Mon Mar 21 22:00:18 UTC 2011 root@linaro:~# aplay -l aplay: device_list:240: no soundcards found... Also, the kernel in 0407 weekly release is old to Mar.21, or is there no source code change? ** Affects: linux-linaro-mx51 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/755205 Title: [imx51evk] no sound card found on 11.05 0407 weekly -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 711181] Re: No video out on Freescale iMX51 board (bbg 3.0)
Issue still exists on Beta release: hwpack_linaro-imx51_20110329-0_armel_unsupported.tar.gz linaro-n-ubuntu-desktop-tar-20110329-0.tar.gz -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/711181 Title: No video out on Freescale iMX51 board (bbg 3.0) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 754254] Re: imx51 randomly truncates serial input at 31 characters
cu turn on XON/XOFF by default, and uucp port config is: port ttyUSB0 type direct device /dev/ttyUSB0 hardflow false speed 115200 I also switch to minicom and turn on software flow control to have a try, still met error sometimes kernel config is: console=tty0 console=ttymxc0,115200n8 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/754254 Title: imx51 randomly truncates serial input at 31 characters -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 754254] Re: imx51 randomly truncates serial input at 31 characters
Exactly at 31 characters, I tested in an somewhat old kernel. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/754254 Title: imx51 randomly truncates serial input at 31 characters -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 710531] Re: [imx51evk] uboot "saveenv" command can not work in 11.05alpha2 release
With 2010-02-11 weekly test, it's ok. Environment: hwpack_linaro-imx51_20110210-0_armel_unsupported.tar.gz linaro-natty-headless-tar-20110216-0.tar.gz -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/710531 Title: [imx51evk] uboot "saveenv" command can not work in 11.05alpha2 release -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 719883] [NEW] [imx51evk] RTC initialize failed
Public bug reported: HW: i.mx51 Babbage 3.0 SW: hwpack_linaro-imx51_20110210-0_armel_unsupported.tar.gz linaro-natty-headless-tar-20110216-0.tar.gz message in syslog: /build/buildd/linux-linaro-mx51-2.6.37/drivers/rtc/hctosys.c: unable to open rt device (rtc0) ** Affects: linux-linaro-mx51 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/719883 Title: [imx51evk] RTC initialize failed -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 690589] Re: "mmcblk0: error -110 transferring data" message dump and system can't boot up on imx51evk
HW is SDHC 4G card, SW: linaro-natty-headless-tar-20101214-0.tar.gz hwpack_linaro-imx51_20101215-0_armel_unsupported.tar.gz but the issue does not exist on the recent release, I tried on: hwpack_linaro-imx51_20110127-0_armel_unsupported.tar.gz linaro-natty-headless-tar-20110130-0.tar.gz but the issue was not found. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/690589 Title: "mmcblk0: error -110 transferring data" message dump and system can't boot up on imx51evk -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 710531] [NEW] [imx51evk] uboot "saveenv" command can not work in 11.05alpha2 release
Public bug reported: Log: > saveenv Saving Environment to MMC... MMC init failed > Environment: linaro-natty-headless-tar-20110130-0.tar.gz hwpack_linaro-imx51_20110127-0_armel_unsupported.tar.gz ** Affects: linux-linaro-mx51 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/710531 Title: [imx51evk] uboot "saveenv" command can not work in 11.05alpha2 release -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 710527] Re: [imx51evk] system can not probe up in 11.05alpha2 release
Mistaken by using a bad board ** Changed in: linux-linaro-mx51 (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/710527 Title: [imx51evk] system can not probe up in 11.05alpha2 release -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 710527] [NEW] [imx51evk] system can not probe up in 11.05alpha2 release
Public bug reported: System can not probe up, can not enter uboot Environment: linaro-natty-headless-tar-20110130-0.tar.gz hwpack_linaro-imx51_20110127-0_armel_unsupported.tar.gz ** Affects: linux-linaro-mx51 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/710527 Title: [imx51evk] system can not probe up in 11.05alpha2 release -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 690589] Re: "mmcblk0: error -110 transferring data" message dump and system can't boot up on imx51evk
It is broken every time when boot up -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/690589 Title: "mmcblk0: error -110 transferring data" message dump and system can't boot up on imx51evk -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 494986] Re: pulseaudio: No sound when playing non-44kHz WAV files on i.MX51 with 2.6.31-105-imx51
Test on default Ubuntu 10.04 image and rootfs, * In Gnome Terminal, comparing to Ubuntu 9.10, now playing 44.1kHz WAV and non-44.1kHz are both OK. * In Totem player, 44.1kHz and non-44.1kHz can play now, but for non-44.1kHz stream, there are "beep" stops when playback. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/494986 Title: pulseaudio: No sound when playing non-44kHz WAV files on i.MX51 with 2.6.31-105-imx51 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 571258] Re: plymouth main process (341) killed by SEGV signal
Either plymouth or plymouth-splash, I just found this issue existing in my system was caused by /etc/fstab file corrupt, then it won't mount all file systems, so please have a check on syslog if possible. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/571258 Title: plymouth main process (341) killed by SEGV signal -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 494986] Re: pulseaudio: No sound when playing non-44kHz WAV files on i.MX51 with 2.6.31-105-imx51
If Ubuntu 9.10, there is the issue. Have not checked 10.04 formal release image yet, will report after verification -- pulseaudio: No sound when playing non-44kHz WAV files on i.MX51 with 2.6.31-105-imx51 https://bugs.launchpad.net/bugs/494986 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 494986] Re: pulseaudio: No sound when playing non-44kHz WAV files on i.MX51 with 2.6.31-105-imx51
For item 2, With fsl own kernel image and Ubuntu 9.10 rootfs If changed resample method to ffmpeg in /etc/pulse/daemon.conf: resample-method = ffmpeg Can play non-44kHz files. Not test on item 1. -- pulseaudio: No sound when playing non-44kHz WAV files on i.MX51 with 2.6.31-105-imx51 https://bugs.launchpad.net/bugs/494986 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 494986] [NEW] pulseaudio: No sound when playing non-44kHz WAV files on i.MX51 with 2.6.31-105-imx51
Public bug reported: Architecture: armel DistroRelease: Ubuntu 9.10 (Karmic Koala) Kernel: 2.6.31-105-imx51 SourcePackage: linux-fsl-imx51 Uname: Linux 2.6.31-105-imx51 armv7l HW: Babbage3.0 board. Installed from formal release image on MX51: http://cdimage.ubuntu.com/ports/releases/9.10/release/ubuntu-9.10 -desktop-armel+imx51.img Phenomenon: 1. Default Ubuntu 9.10 image and rootfs. * In Gnome Terminal, playing a 44.1kHz WAV by "$ aplay audio_44k.wav" is good. But no sound when playing a non-44.1kHz WAV file, such as 32kHz, 48kHz, even with root privilege. * And same in Totem player. 2. With fsl own kernel image and Ubuntu 9.10 rootfs, here is some phenomenon and analysis: About the audio issue in Ubuntu 9.10, we found that the pluseaudio can not work correctly with non-44.1Khz sample rate by non-root user. With the root user, aplay command will call hardware device directly. I am not familiar with pulseaudio, what's the difference between the 44KHz and 32KHz? case 1: aplay test_44kHz_stereo.wav by non-root user, it is Okay with PulseAudio, the following are the detail information: Playing WAVE '/mnt/nfshomes/dexter/test_vectors/test_44kHz_stereo.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo ALSA <-> PulseAudio PCM I/O Plugin Its setup is: stream : PLAYBACK access : RW_INTERLEAVED format : S16_LE subformat: STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 16 buffer_size : 22050 period_size : 5512 period_time : 125000 tstamp_mode : NONE period_step : 1 avail_min: 5512 period_event : 0 start_threshold : 22050 stop_threshold : 22050 silence_threshold: 0 silence_size : 0 boundary : 1445068800 case 2: aplay test_32kHz_stereo.wav by non-root user, there is no auido output with PulseAudio, the following are the detail information: Playing WAVE '/mnt/nfshomes/dexter/test_vectors/test_32kHz_stereo.wav' : Signed 16 bit Little Endian, Rate 32000 Hz, Stereo ALSA <-> PulseAudio PCM I/O Plugin Its setup is: stream : PLAYBACK access : RW_INTERLEAVED format : S16_LE subformat: STD channels : 2 rate : 32000 exact rate : 32000 (32000/1) msbits : 16 buffer_size : 16000 period_size : 4000 period_time : 125000 tstamp_mode : NONE period_step : 1 avail_min: 4000 period_event : 0 start_threshold : 16000 stop_threshold : 16000 silence_threshold: 0 silence_size : 0 boundary : 2097152000 case 3: aplay test_32kHz_stereo.wav by root user, it will use Hardware device instead of Pluseaudio and it is Okay, the following is the detail information: Playing WAVE '/mnt/nfshomes/dexter/test_vectors/test_32kHz_stereo.wav' : Signed 16 bit Little Endian, Rate 32000 Hz, Stereo Plug PCM: Hardware PCM card 0 'imx-3stack' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : RW_INTERLEAVED format : S16_LE subformat: STD channels : 2 rate : 32000 exact rate : 32000 (32000/1) msbits : 16 buffer_size : 6144 period_size : 1536 period_time : 48000 tstamp_mode : NONE period_step : 1 avail_min: 1536 period_event : 0 start_threshold : 6144 stop_threshold : 6144 silence_threshold: 0 silence_size : 0 boundary : 1610612736 appl_ptr : 0 hw_ptr : 0 I also found some information from pulseaudio logfile, hope it could be useful to debug this issue. Dec 4 19:01:10 ubuntu-desktop pulseaudio[7196]: alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write! Dec 4 19:01:10 ubuntu-desktop pulseaudio[7196]: alsa-sink.c: Most likely this is a bug in the ALSA driver '(null)'. Please report this issue to the ALSA developers. Dec 4 19:01:10 ubuntu-desktop pulseaudio[7196]: alsa-sink.c: We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail. ** Affects: linux-fsl-imx51 (Ubuntu) Importance: Undecided Status: New ** Tags: pulseaudio -- pulseaudio: No sound when playing non-44kHz WAV files on i.MX51 with 2.6.31-105-imx51 https://bugs.launchpad.net/bugs/494986 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs