[Bug 153354] Re: Alsa error with xdtv
Tested with a Hauppauge HVR 1110. I've not configured v4l for Dapper for the moment focusing on the audio problem : Under Dapper : [17179585.144000] saa7130/34: v4l2 driver version 0.2.14 loaded [17179585.144000] saa7133[0]: found at :01:0a.0, rev: 209, irq: 5, latency: 32, mmio: 0xe600 [17179585.144000] saa7133[0]: subsystem: 0070:6701, board: UNKNOWN/GENERIC [card=0,autodetected] [17179585.144000] saa7133[0]: board init: gpio is 640 [17179585.296000] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [17179585.296000] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff [17179585.296000] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff [17179585.296000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [17179585.296000] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff [17179585.296000] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179585.296000] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179585.296000] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179585.296000] saa7133[0]: registered device video0 [v4l2] [17179585.296000] saa7133[0]: registered device vbi0 [17179585.308000] saa7134 ALSA driver for DMA sound loaded [17179585.308000] saa7133[0]/alsa: saa7133[0] at 0xe600 irq 5 registered as card -1 Under Hardy (Gusty, Feisty surely the same error) : [ 31.555441] saa7130/34: v4l2 driver version 0.2.14 loaded [ 31.555864] saa7133[0]: found at :01:0a.0, rev: 209, irq: 5, latency: 32, mmio: 0xe600 [ 31.555872] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected] [ 31.555885] saa7133[0]: board init: gpio is 640 [ 31.736128] ir-kbd-i2c: HVR 1110 detected at i2c-2/2-0071/ir0 [saa7133[0]] [ 31.786092] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 31.786103] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff [ 31.786110] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff [ 31.786116] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 31.786122] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff [ 31.786129] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 31.786134] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 31.786140] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 32.045966] tuner 2-004b: chip found @ 0x96 (saa7133[0]) [ 32.669171] saa7133[0]: registered device video0 [v4l2] [ 32.669193] saa7133[0]: registered device vbi0 [ 32.669215] saa7133[0]: registered device radio0 [ 32.751356] saa7134_alsa: disagrees about version of symbol snd_pcm_new [ 32.751365] saa7134_alsa: Unknown symbol snd_pcm_new [ 32.751574] saa7134_alsa: disagrees about version of symbol snd_pcm_stop [ 32.751576] saa7134_alsa: Unknown symbol snd_pcm_stop [ 32.751874] saa7134_alsa: disagrees about version of symbol snd_pcm_lib_ioctl [ 32.751876] saa7134_alsa: Unknown symbol snd_pcm_lib_ioctl [ 32.751949] saa7134_alsa: disagrees about version of symbol snd_pcm_set_ops [ 32.751951] saa7134_alsa: Unknown symbol snd_pcm_set_ops [ 32.752064] saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer [ 32.752067] saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_integer [ 32.752225] saa7134_alsa: disagrees about version of symbol snd_pcm_period_elapsed [ 32.752227] saa7134_alsa: Unknown symbol snd_pcm_period_elapsed [ 32.752265] saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_step [ 32.752267] saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_step [ 32.945655] DVB: registering new adapter (saa7133[0]) I hope somebody could give me a answer one day because I can't upgrade my system to the last version of Ubuntu because of alsa problem. -- Alsa error with xdtv https://bugs.launchpad.net/bugs/153354 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 184269] Re: amule received an X Window System error
*** This bug is a duplicate of bug 183969 *** https://bugs.launchpad.net/bugs/183969 Yes, same problem after the Xorg update, under Ubuntu Dapper. -- amule received an X Window System error https://bugs.launchpad.net/bugs/184269 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 184269] Re: amule received an X Window System error
*** This bug is a duplicate of bug 183969 *** https://bugs.launchpad.net/bugs/183969 For the moment, I've just forced for the preview version in : Package Force Version 'choose your good preview version'. Amule runs perfectly. -- amule received an X Window System error https://bugs.launchpad.net/bugs/184269 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 153354] Re: Alsa error with xdtv
I'm back under Dapper to use this TV card because it's the only big problem I have under Gusty. Before that, I tested the card TV under Feisty and same problem except a small difference in the log result : ALSA lib control.c:910:(snd_ctl_open_noupdate) Invalid CTL alsa Dapper : ok Edgy : ? Feisty : error Gusty : error -- Alsa error with xdtv https://bugs.launchpad.net/bugs/153354 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 153354] Re: Alsa error with xdtv
Hi Daniel, Here is : http://pastebin.ca/752602 -- Alsa error with xdtv https://bugs.launchpad.net/bugs/153354 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 153354] Re: Alsa error with xdtv
I added to /etc/modprobe.d/options : options bttv tuner=38 options tda9887 port2=0 Under Dapper, it was perfect. -- Alsa error with xdtv https://bugs.launchpad.net/bugs/153354 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 153354] Re: Alsa error with xdtv
I have the same problem with TVtime (official package) : [EMAIL PROTECTED]:~$ tvtime -v Utilise tvtime 1.0.2. Lit la configuration depuis /etc/tvtime/tvtime.xml Lit la configuration depuis /home/kawada/.tvtime/tvtime.xml cpuinfo: CPU AMD Athlon(tm) XP 2600+, family 6, model 10, stepping 0. cpuinfo: CPU measured at 1913,303MHz. tvtime: Cannot set priority to -10: Permission non accordée. xcommon: Display :0.0, vendor The X.Org Foundation, vendor release 1030 xfullscreen: Using XINERAMA for dual-head information. xfullscreen: Pixels are square. xfullscreen: Number of displays is 1. xfullscreen: Head 0 at 0,0 with size 1280x1024. xcommon: Have XTest, will use it to ping the screensaver. xcommon: Pixel aspect ratio 1:1. xcommon: Pixel aspect ratio 1:1. xcommon: Window manager is Fluxbox and is EWMH compliant. xcommon: Using EWMH state fullscreen property. xcommon: Using EWMH state above property. xcommon: Using EWMH state below property. xcommon: Pixel aspect ratio 1:1. xcommon: Displaying in a 768x576 window inside 768x576 space. xvoutput: Using XVIDEO adaptor 73: ATI Radeon Video Overlay. speedycode: Using MMXEXT optimized functions. station: Reading stationlist from /home/kawada/.tvtime/stationlist.xml videoinput: Using video4linux2 driver 'bttv', card 'BT878 video (Hauppauge (bt878))' (bus PCI::01:07.0). videoinput: Version is 2321, capabilities 5010015. videoinput: Maximum input width: 924 pixels. tvtime: Sampling input at 720 pixels per scanline. xcommon: Pixel aspect ratio 1:1. xcommon: Displaying in a 768x576 window inside 768x576 space. xcommon: Received a map, marking window as visible (69). xcommon: Received an unmap, marking window as hidden (22900). xcommon: Received a map, marking window as visible (22906). tvtime: Cleaning up. Merci d'utiliser tvtime. The volume rate stay to 0 when I try to increase/decrease the sound. Info for the WIntv card : [ 35.548952] bttv: driver version 0.9.17 loaded [ 35.548958] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 35.549033] bttv: Bt8xx card found (0). [ 35.549356] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5 [ 35.549360] ACPI: PCI Interrupt :01:07.0[A] - Link [LNK4] - GSI 5 (level, low) - IRQ 5 [ 35.549375] bttv0: Bt878 (rev 17) at :01:07.0, irq: 5, latency: 32, mmio: 0xe600 [ 35.549387] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 35.549391] bttv0: using: Hauppauge (bt878) [card=10,autodetected] [ 35.549429] bttv0: gpio: en=, out= in=00db [init] [ 35.551918] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 35.580765] tveeprom 2-0050: The eeprom says no radio is present, but the tuner type [ 35.580768] tveeprom 2-0050: indicates otherwise. I will assume that radio is present. [ 35.580772] tveeprom 2-0050: Hauppauge model 44809, rev E1A5, serial# 8233162 [ 35.580776] tveeprom 2-0050: tuner model is TCL MPE05-2 (idx 105, type 38) [ 35.580779] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 35.580782] tveeprom 2-0050: audio processor is None (idx 0) [ 35.580785] tveeprom 2-0050: decoder processor is BT878 (idx 14) [ 35.580787] tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter [ 35.580790] bttv0: Hauppauge eeprom indicates model#44809 [ 35.580793] bttv0: using tuner=38 [ 35.580825] bttv0: i2c: checking for MSP34xx @ 0x80... 6input: ImExPS/2 Logitech Wheel Mouse as /class/input/input3 [ 35.843241] parport_pc 00:0c: reported by Plug and Play ACPI [ 35.843306] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 35.855674] not found [ 35.855680] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 35.989321] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 36.272826] bttv0: i2c: checking for TDA9887 @ 0x86... found [ 36.315374] tuner 2-0043: chip found @ 0x86 (bt878 #0 [sw]) [ 36.315418] tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 36.317085] tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw]) [ 36.317099] tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 36.317102] tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 36.324455] bttv0: registered device video0 [ 36.324489] bttv0: registered device vbi0 [ 36.324520] bttv0: registered device radio0 [ 36.324548] bttv0: PLL: 28636363 = 35468950 .. ok If anybody could read and post a answer :) -- Alsa error with xdtv https://bugs.launchpad.net/bugs/153354 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 153354] Alsa error with xdtv
Public bug reported: Hello ! I used a Hauppauge WinTV Express card with Ubuntu Dapper since some months and Sound + Video was ok. I try the Gusty RC : I compil as usual xdtv source and I have this alsa error : [EMAIL PROTECTED]:~$ xdtv -mixer_dev alsa This is xdtv 2.4.0 running on Linux/i686 (2.6.22-14-generic). Warning: locale not supported by C library, locale unchanged scandir: No such file or directory filename = /home/kawada/.xdtv/xdtvrc X Error of failed request: XF86DGANoDirectVideoMode Major opcode of failed request: 137 (XFree86-DGA) Minor opcode of failed request: 1 (XF86DGAGetVideoLL) Serial number of failed request: 13 Current serial number in output stream: 13 xdtv_v4l-conf had some trouble, trying to continue anyway xinerama 0: 1280x1024+0+0 wmhooks: netwm detected wmhooks: netwm state above supported wmhooks: netwm fullscreen supported wmhooks: gnome detected DGA: server=2.0, include=2.0 Selected XvVideo: video4linux on port 73 (overlay) Selected XvImage adaptor with yuyv support: ATI Radeon Video Overlay on port 74 (grabdisplay) XV Information: XV_ENCODING max value = 1000 XV_ENCODING min value = -1000 XV_ENCODING cur value = 0 XV_BRIGHTNESS max value = 1000 XV_BRIGHTNESS min value = -1000 XV_BRIGHTNESS cur value = 37 XV_CONTRAST max value = 1000 XV_CONTRAST min value = -1000 XV_CONTRAST cur value = -146 XV_SATURATION max value = 1000 XV_SATURATION min value = -1000 XV_SATURATION cur value = -421 XV_HUE max value = 1000 XV_HUE min value = -1000 XV_HUE cur value = 0 XV_MUTE max value = 1 XV_MUTE min value = 0 XV_MUTE cur value = 0 XV_FREQ max value = 16000 XV_FREQ min value = 0 XV_FREQ cur value = 8052 WARNING: video memory base unknown, may be caused by a problem with xdtv_v4l-conf or a non-availability of DGA and frame buffer devices: CLASSICAL OVERLAY IS DISABLED ! *** GRABBER DEVICE TYPE = v4l2 Warning: Cannot convert string -xxl-ledfixed-medium-r-semicondensed--39-120-75-75-c-180-*-* to type FontStruct Warning: Missing charsets in String to FontSet conversion Warning: Cannot convert string -xxl-ledfixed-medium-r-semicondensed--39-120-75-75-c-180-*-*, -jis-fixed-medium-r-normal--24-230-75-75-c-240-jisx0208.1983-0 to type FontSet MMX, SSE, AMD MMX extensions, 3DNOW, have been detected. Method mmxext_32K *** AUDIO DEVICE TYPE = alsa ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL alsa snd_mixer_open: No such file or directory mixer open: No such file or directory *** MIXER DEVICE TYPE = grab ioctl VIDIOC_DQBUF: Input/output error total reset ioctl VIDIOC_DQBUF: Input/output error ioctl VIDIOC_DQBUF: Input/output error ioctl VIDIOC_DQBUF: Invalid argument ioctl VIDIOC_DQBUF: Input/output error I've no sound but video works perfectly. ** Affects: alsa-lib (Ubuntu) Importance: Undecided Status: New -- Alsa error with xdtv https://bugs.launchpad.net/bugs/153354 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 152382] Ktoon 0.8 is not running
Public bug reported: Binary package hint: ktoon Hello, tested with the Gusty RC. I want to run KToon and I have this : [Initializing DApplication] [Initializing DConfig] [Initializing DConfigDocument] *Init configuration file : /home/kawada/.ktoon/ktoon.cfg [Initializing KTSplash] ktoon is crashing with signal 11 :( ASSERT failure in QCoreApplication: there should be only one application object, file kernel/qcoreapplication.cpp, line 418 Abandon (core dumped) ** Affects: ktoon (Ubuntu) Importance: Undecided Status: New -- Ktoon 0.8 is not running https://bugs.launchpad.net/bugs/152382 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 152382] Re: Ktoon 0.8 is not running
Sorry, I didn't see the bug report 144568 ! Can you delete this one ? -- Ktoon 0.8 is not running https://bugs.launchpad.net/bugs/152382 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 144568] Re: ktoon not start (core dumped)
Hi, testing in progress of the ktoon_0.8.1-1_i386.deb (debian unstable). KToon is running well. I notice some display bugs : in Application KTpreferences; Icons of Tv in 'Animation' don't appear; In 'Illustration' window, the icons of three menus where you can select the tools like Pencil, Brush etc... are broken. KToon seems to be lightly broken... I tested recently the binary for Ubuntu-Dapper and I didn't see all this bugs. Okay, It's Rugby time this evening, I am going to prepare this :-) Let's Go Fraaance !!! ^_^ -- ktoon not start (core dumped) https://bugs.launchpad.net/bugs/144568 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 73451] Re: Fluxbox versus Gnome/GTK : Epiphany's window resize itself
Tested under WIndowMaker, I think you are right. I didn't notice some problems with Epiphany. Should I change 'Binary package hint: epiphany-browser' for 'fluxbox' ? -- Fluxbox versus Gnome/GTK : Epiphany's window resize itself https://launchpad.net/bugs/73451 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 73451] Re: Fluxbox versus Gnome/GTK : Epiphany's window resize itself
Hello Sebastien, Hum... ok I tried this : Under Fluxbox : Save file as then the Window is opening The folder list expensed is closed I click on the arrow to display it, and the bug appears as I explained. I test again and again to be sure. Under Gnome : Save file as then the Window is opening The folder list expensed is closed I click on the arrow to display it : the window displays correctly. I read Fluxbox has a 'Partial GNOME support', will it be a part of this problem ? And how to know if it's not a GTK or Epiphany or Fluxbox bug ? (I am not a computer specialist) -- Fluxbox versus Gnome/GTK : Epiphany's window resize itself https://launchpad.net/bugs/73451 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 73451] Fluxbox versus Gnome/GTK : Epiphany's window resize itself
Public bug reported: Binary package hint: epiphany-browser Hello, I use Ubuntu since 1 year with Fluxbox as WM. This bug I report works with Fluxbox official package and Fluxbox compiled by myself (last 1.0rc2 for this example). I am under Ubuntu Dapper. Here is I notice : When I do a right-click and 'Save link as' with Epiphany, I can see two situations : - First, all is ok : http://img245.imageshack.us/img245/5121/fluxgtkor7.png The window size displays correctly for me. - Second, problem : http://img156.imageshack.us/img156/8087/fluxgtk2cv6.png The window resize itself in the 'folders' area. You can see it's more smaller than the first printscreen. I must resize myself with alt+mouse. This problem doesn't appear all the time. If you ask me when, which frequency, I can't answer. Sometimes yes sometimes no. It always is with Epiphany. I don't notice any problems with others software under Fluxbox. I tested under Gnome to be sure and I didn't notice this problem. Stan. ** Affects: epiphany-browser (Ubuntu) Importance: Undecided Status: Unconfirmed ** Description changed: Binary package hint: epiphany-browser Hello, I use Ubuntu since 1 year with Fluxbox as WM. This bug I report works with Fluxbox official package and Fluxbox compiled by myself (last - 1.0rc2 for this example). Here is I notice : + 1.0rc2 for this example). I am under Ubuntu Dapper. Here is I notice : When I do a right-click and 'Save link as' with Epiphany, I can see two situations : - First, all is ok : http://img245.imageshack.us/img245/5121/fluxgtkor7.png The window size displays correctly for me. - Second, problem : http://img156.imageshack.us/img156/8087/fluxgtk2cv6.png The window resize itself in the 'folders' area. You can see it's more smaller than the first printscreen. I must resize myself with alt+mouse. This problem doesn't appear all the time. If you ask me when, which frequency, I can't answer. Sometimes yes sometimes no. It always is with Epiphany. I don't notice any problems with others software under Fluxbox. I tested under Gnome to be sure and I didn't notice this problem. Stan. -- Fluxbox versus Gnome/GTK : Epiphany's window resize itself https://launchpad.net/bugs/73451 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs