[Bug 55244] Re: battery status popup only displays once
I've tested this again with edgy final, and i get the exact same behaviour. Following from juan's mention of 'lshal -m' above, i've done some testing: 1. Boot edgy, run 'lshal -m', press fn+f3: keypress event is visible 2. Press fn+f3 again: keypress event does not occur 3. Suspend edgy, unsuspend edgy, press fn+f3 again: keypress event does not occur 4. Hibernate edgy, unhibernate edgy, press fn+f3 again: keypress event does not occur 5. Reboot edgy, press fn+f3: keypress event is visible So, it seems pretty clear that it is not a hardware issue, otherwise hibernate/unhibernate should have cleared it. I'm changing the affected package to the kernel for now, as i'm not sure where exactly it should be against. ** Changed in: Ubuntu Sourcepackagename: None = linux-source-2.6.17 Importance: Undecided = Low -- battery status popup only displays once https://launchpad.net/bugs/55244 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 42083] Re: impossible to read a dvd
I've just tested dvd playback and cd-writing on edgy on the inspiron 9300, and both worked perfectly. -- impossible to read a dvd https://launchpad.net/bugs/42083 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 78228] External monitor does not work with radion mobility M300
Public bug reported: Binary package hint: xserver-xorg-video-ati My inspiron 9300 has the following gfx card: 01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon Mobility M300] When i connect an external monitor to the d-sub/vga connector, the monitor turns on, and says it's receiving the correct refresh rate, but the picture stays completely black. Pressing the crt/lcd button on the laptop causes some brief corruption on the monitor, but otherwise changes nothing. I'm running edgy with updates till today (2007-01-06). This worked fine on dapper. The relevant packages are: xserver-xorg-video-ati 6.6.2-0ubuntu4 linux-image-2.6.17-10-generic 2.6.17.1-10.34 ** Affects: xserver-xorg-video-ati (Ubuntu) Importance: Undecided Status: Unconfirmed -- External monitor does not work with radion mobility M300 https://launchpad.net/bugs/78228 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 78228] Re: External monitor does not work with radion mobility M300
I should note that the bios was upgraded from A04 to A05 since it was last tested on dapper. If that's likely to have made the difference, i can boot off of a dapper live cd to test (don't have one available right now). -- External monitor does not work with radion mobility M300 https://launchpad.net/bugs/78228 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 55237] Re: crt/lcd button on inspiron 9300 doesn't do anything
I can confirm this still happens on edgy. See also bug #78228. ** Changed in: Ubuntu Sourcepackagename: None = xserver-xorg-video-ati Importance: Undecided = Medium -- crt/lcd button on inspiron 9300 doesn't do anything https://launchpad.net/bugs/55237 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 78229] 'hibernate' key doesn't work on inspiron 9300
Public bug reported: Binary package hint: hotkey-setup Steps to reproduce: 1. Boot edgy, log in 2. Press fn+f1 Expected result: Machine should hibernate Actual result: Nothing happens Software: Edgy, with updates till today (2007-01-06) hotkey-setup 0.1-17ubuntu3 linux-image-2.6.17-10-generic 2.6.17.1-10.34 This worked fine in dapper. Also, in dapper the key sent e00A. In edgy, it sends 0xa5. ** Affects: hotkey-setup (Ubuntu) Importance: Undecided Status: Unconfirmed -- 'hibernate' key doesn't work on inspiron 9300 https://launchpad.net/bugs/78229 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 70685] Re: DMA doesn't work in edgy on t43p dvd drive
Here's the output of lspci: [EMAIL PROTECTED]:~$ sudo lspci -s 00:1f.2 -nv 00:1f.2 0101: 8086:2653 (rev 03) (prog-if 80) Subsystem: 1014:056a Flags: bus master, 66MHz, medium devsel, latency 0 I/O ports at unassigned I/O ports at unassigned I/O ports at unassigned I/O ports at unassigned I/O ports at 18c0 [size=16] Capabilities: [70] Power Management version 2 and i've attached the dmesg output from the 2.6.19-2-generic kernel from feisty. ** Attachment added: 2.6.19-2-generic.dmesg http://librarian.launchpad.net/5025766/2.6.19-2-generic.dmesg -- DMA doesn't work in edgy on t43p dvd drive https://launchpad.net/bugs/70685 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 71174] Misleading error message with mv and existing directories
Public bug reported: Binary package hint: coreutils Steps to reproduce: mkdir -p a b/a touch b/a/foo mv a b Expected result: mv: cannot overwrite directory `b/a' Actual result: mv: cannot move `a' to a subdirectory of itself, `b/a' This is on edgy, kernel 2.6.17-10-generic, coreutils 5.96-5-ubuntu4 ** Affects: coreutils (Ubuntu) Importance: Undecided Status: Unconfirmed -- Misleading error message with mv and existing directories https://launchpad.net/bugs/71174 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 70685] DMA doesn't work in edgy on t43p dvd drive
Public bug reported: Binary package hint: linux-image-2.6.17-10-generic Reading from the dvd drive in edgy is painfully slow. dd (invoked as: dd if=/dev/scd0 of=/dev/null bs=100M count=1) reports a read-speed of ~1.8MB/s. The same problem existed in dapper, and i think it's related to bug #42083. I've tried booting with combined_mode=ide, combined_mode=libata, neither made any difference, nor did passing the atapi_enabled=1 parameter to libata. Most of the instructions i've found on the net talk about getting libata/ata_piix to handle the sata controller instead of ide- generic, but in my case that's already the case, and DMA still doesn't work, despite dmesg claiming the drive is set up for UDMA/33. DMA works fine for the hard drive though. Software: Edgy release linux-image-2.6.17-10-generic Hardware: Ibm t43p laptop Intel 82801FBM (ICH6M) SATA Controller. Pciid 8086:2653 ** Affects: linux-source-2.6.17 (Ubuntu) Importance: Undecided Status: Unconfirmed -- DMA doesn't work in edgy on t43p dvd drive https://launchpad.net/bugs/70685 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 42083] Re: impossible to read a dvd
I'm getting the exact same issue on both my thinkpad t43p and my inspiron 9300. I haven't tried the above tweaking yet, will post back when i know if it works or not for me. Possibly related is that i've been unable to write cds on the t43p also. -- impossible to read a dvd https://launchpad.net/bugs/42083 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 64204] Re: lvm install into an existing volume doesn't work on Edgy Beta amd64
I can confirm this in the edgy i386 beta too. Doing an 'lvm lvscan' in the console shows that the lv's are being detected alright, but none of them have been activated. Setting the lv's active manually allows the partioner to see them and the install works fine then. -- lvm install into an existing volume doesn't work on Edgy Beta amd64 https://launchpad.net/bugs/64204 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 14768] Re: LVM doesn't autodetect MD
** Bug watch added: Debian Bug tracker #278180 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=278180 ** Also affects: lvm2 (upstream) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=278180 Importance: Unknown Status: Unknown ** Bug watch added: Debian Bug tracker #278180 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=278180 ** Also affects: lvm2 (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=278180 Importance: Unknown Status: Unknown -- LVM doesn't autodetect MD https://launchpad.net/bugs/14768 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 14768] Re: LVM doesn't autodetect MD
Gah, added the 'upstream' bug-watch by mistake, it should have been the distro one. -- LVM doesn't autodetect MD https://launchpad.net/bugs/14768 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 64204] Re: lvm install into an existing volume doesn't work on Edgy Beta amd64
To clarify, this is using the edgy beta alternate installer. Steps to reproduce: 1. Boot off of edgy beta alternate installer cd 2. Proceed through steps until you reach the partioner, choosing 'manually edit partion table' 3. Choose 'confiugre the logical volume manager' Expected results: The partioner should detect and display the various vg's and lv's that it's found Actual results: The partioner reloads instantly with no change in the partitions offered Workaround: 1. Change to the console via alt-f2 2. Manually activate the relevant lv's using 'lvm lvchange -ay $vgname/$lvname' 3. Go back to the partioner via alt-f1, choose the 'go back' option 4. Select 'partition disks' 5. The lv's will now be visible and usable in the paritioner as normal. -- lvm install into an existing volume doesn't work on Edgy Beta amd64 https://launchpad.net/bugs/64204 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 60098] irssi silently truncates long lines
Public bug reported: Steps to reproduce: 1. Start irssi 2. Connect to irc.freenode.org, join a random empty channel 3. Paste/type a long line from an irssi client (at least 450 characters long) What should happen: All the characters should be sent, if the line is too long it should be split into multiple lines What really happens: irssi claims to send all of the characters (they all show up in the senders window fine), but really only sends about 450 of them. ** Affects: irssi-text (Ubuntu) Importance: Untriaged Status: Unconfirmed -- irssi silently truncates long lines https://launchpad.net/bugs/60098 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57446] Re: Rhythmbox + gnome-keyring clash
Yes, it's the same password dialog 11 times. -- Rhythmbox + gnome-keyring clash https://launchpad.net/bugs/57446 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57883] Re: apt-proxy fails to shutdown cleanly
-- apt-proxy fails to shutdown cleanly https://launchpad.net/bugs/57883 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57883] apt-proxy fails to shutdown cleanly
Public bug reported: Steps to reproduce: 1. apt-get install apt-proxy 2. /etc/init.d/apt-proxy restart Expected result: /var/log/apt-proxy.log would show a clean shutdown of the daemon Actual result: /var/log/apt-proxy.log shows a exception thrown on shutdown: exceptions.AttributeError: 'str' object has no attribute 'get_packages_db' ** Affects: apt-proxy (Ubuntu) Importance: Untriaged Status: Unconfirmed -- apt-proxy fails to shutdown cleanly https://launchpad.net/bugs/57883 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57883] Re: apt-proxy fails to shutdown cleanly
Here's a patch that fixes the bug. -- apt-proxy fails to shutdown cleanly https://launchpad.net/bugs/57883 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57446] Rhythmbox + gnome-keyring clash
Public bug reported: Steps to reproduce: 1. Mount a samba share using nautilus, store the password in gnome-keyring when prompted. 2. Add some music tracks from that share into the rhythmbox library 3. Reboot 4. Start rhythmbox Expected result: Rhythmbox should get gnome-keyring to prompt for password for the default keyring. If unlocking the keyring succeeds, rhythmbox should then be able to access the share. If a user hits 'cancel' on the dialog, rhymbox should stop requesting it. Actual result: Rhythmbox throws up multiple gnome-keyring dialogs (11 in my setup), hitting cancel in any of them causes another one to reappear until you type your password into one of them correctly. After that you still have to hit cancel on all the other dialogs to get them to go away. Platform: Dapper i386 + updates till today (2006-08-23) rhythmbox 0.9.3.1-0ubuntu9 gnome-keyring 0.4.9-1ubuntu1 ** Affects: rhythmbox (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Rhythmbox + gnome-keyring clash https://launchpad.net/bugs/57446 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57446] Re: Rhythmbox + gnome-keyring clash
Here's a screenshot of what happens. -- Rhythmbox + gnome-keyring clash https://launchpad.net/bugs/57446 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57004] /dev/pilot symlink not created for handspring treo 180
Public bug reported: Steps to reproduce: 1. Connect a handspring treo 180 via the usb cable to a machine 2. Press the 'hotsync' button on the cable 3. run 'ls -l /dev/pilot' Expected result: /dev/pilot should be symlinked to something like /dev/ttyUSB1 Actual result: /dev/pilot has not been created Software: Dapper i386 + updates to 2006-08-20 Kernel 2.6.15-26-386 (version 2.6.15-26.46) Udev 079-0ubuntu34 Hardware: Amd64 desktop machine ** Affects: udev (Ubuntu) Importance: Untriaged Status: Unconfirmed -- /dev/pilot symlink not created for handspring treo 180 https://launchpad.net/bugs/57004 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57004] Re: /dev/pilot symlink not created for handspring treo 180
Here's a patch that fixes the issue. -- /dev/pilot symlink not created for handspring treo 180 https://launchpad.net/bugs/57004 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1170] Re: hostnames not accepted in tsocks.conf
Hmm. Has that upload gone through? Checking the source packages for dapper and edgy both show that --enable-hostname is still supplied in debian/rules (also packages.ubuntu.com/tsocks shows that it's the same package unmodified that has been used since warty), and the dapper package still gives the same error. I had a quick look at the supplied configure script btw, it definetely has inbuilt support for both '--enable-hostnames' and '--disable-hostnames', i'm not sure why it's screwing up though. -- hostnames not accepted in tsocks.conf https://launchpad.net/bugs/1170 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 47044] Re: apt cant work with disable proxy
I've had the same issue with the apt acquire::http::proxy being set to 'false' preventing it from working with apt-proxy. With the setting as is, apt sends a 'GET http://hostname:portnum/ubuntu/etc' request instead of just 'GET /ubuntu/etc', which causes apt-proxy to (probably wrongfully) barf. -- apt cant work with disable proxy https://launchpad.net/bugs/47044 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 37235] Re: SD card reader only works when card is plugged in on load
The card reader in my dell inspiron 9300 works fine with the latest dapper updates, it didn't work at all with the default install. -- SD card reader only works when card is plugged in on load https://launchpad.net/bugs/37235 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 45975] Re: Record from input combo error + sound recording does not work.
** Bug 45291 has been marked a duplicate of this bug -- Record from input combo error + sound recording does not work. https://launchpad.net/bugs/45975 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 45291] Re: Multiple entries in Soundrecorder
*** This bug is a duplicate of bug 45975 *** ** This bug has been marked a duplicate of bug 45975 Record from input combo error + sound recording does not work. -- Multiple entries in Soundrecorder https://launchpad.net/bugs/45291 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 45975] Re: Record from input combo error + sound recording does not work.
I've just marked #45291 as a duplicate of this. I also get the same input duplication on both machines i've tested this on. Steps to reproduce: 1. Start sound-recorder 2. Click 'record' 3. After a few seconds, click 'stop' 4. Click 'record' 5. After a few seconds, click 'stop' 6. Click on the 'record from input' list Expected result: There should be the same number of items in the list as when the program started Actual result: There is a copy of every input for every N-1 times the record-stop cycle was done. -- Record from input combo error + sound recording does not work. https://launchpad.net/bugs/45975 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 40800] Re: HAL blocks suspend
I'm hitting the same problem on my dell inspiron 9300 here. Attaching dmesg, it contains a bunch of ata errors which look like they're related to the cd drive alright. -- HAL blocks suspend https://launchpad.net/bugs/40800 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 3642] Re: Suspend (or hibernate) does nothing
I'm also using gdm 2.14.10-0ubuntu1, suspend works fine from gdm, but hibernate gives me the authentication failed error. -- Suspend (or hibernate) does nothing https://launchpad.net/bugs/3642 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 40800] Re: HAL blocks suspend
My IDE chipset is: :00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) My cdrom is: Vendor: PHILIPS Model: CDRW/DVD SCB5265 Rev: TD15 -- HAL blocks suspend https://launchpad.net/bugs/40800 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 55235] touchpad doesn't disable while typing
Public bug reported: Steps to reproduce: 1. Open any application, say gedit 2. Start typing 3. While typing, try to move the mouse pointer Expected result: The touchpad input would be ignored Actual result: The touchpad input is not ignored Hardware: Dell Inspiron 9300 laptop Synaptics touchpad Software: Dapper + updates till 2006-08-04 kernel 2.6.15-26-386 ** Affects: Ubuntu Importance: Untriaged Status: Unconfirmed -- touchpad doesn't disable while typing https://launchpad.net/bugs/55235 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 54948] Re: Unnecessary tab positions in unsaved changes dialog
This isn't specific to gedit. The exact same thing happens in similar dialogs with sound-recorder, mousepad, nautilus, xchat-gnome, so i'm thinking it's a gnome dialog bug. -- Unnecessary tab positions in unsaved changes dialog https://launchpad.net/bugs/54948 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 55237] crt/lcd button on inspiron 9300 doesn't do anything
Public bug reported: Steps to reproduce: With monitor connected to vga port, press fn+f8 (marked crt/lcd) Expected result: The displays to alternate between lcd on, crt on, both on. Actual result: The crt flickers momentarily but that's it, stays in the 'both on' state. Hardware: Dell inspiron 9300 Software: Dapper + updates to 2006-08-04 Kernel 2.6.15-26-386 ** Affects: Ubuntu Importance: Untriaged Status: Unconfirmed -- crt/lcd button on inspiron 9300 doesn't do anything https://launchpad.net/bugs/55237 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 55244] battery status popup only displays once
Public bug reported: Steps to reproduce: 1. Press the battery status hotkey (fn+f3 on this laptop) 2. Click the 'x' to close the battery status popup 3. Press the battery status hotkey again Expected result: The battery status popup displays again Actual result: Nothing happens. Restarting acpid, logging out of gnome and back in again, restarting gdm etc makes no difference. Only rebooting appears to make it work again, once. Software: Dapper + updates to 2006-08-04 Kernel 2.6.15-26-386 Hardware: Dell Inspiron 9300 ** Affects: Ubuntu Importance: Untriaged Status: Unconfirmed -- battery status popup only displays once https://launchpad.net/bugs/55244 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 52692] Re: xchat-gnome crashes on 'save transcript' on blank screen
Sure: [EMAIL PROTECTED]:~/Desktop(0)$ ./test 2006-07-15-10h10 -- xchat-gnome crashes on 'save transcript' on blank screen https://launchpad.net/bugs/52692 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 52692] Re: xchat-gnome crashes on 'save transcript' on blank screen
Found the issue, here's a patch that fixes it. It's been a while since i last did gtk programming, so it may not be the cleanest way to handle this. Disabling the menu entry (and keyboard shortcut) until there is something to save would probably be best. -- xchat-gnome crashes on 'save transcript' on blank screen https://launchpad.net/bugs/52692 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 52692] Re: xchat-gnome crashes on 'save transcript' on blank screen
Sorry, really should have included those details. I'm using ubuntu 6.06. xchat-gnome version 0.11-0ubuntu6. It is 100% reproducible on the two dapper machines i have here. -- xchat-gnome crashes on 'save transcript' on blank screen https://launchpad.net/bugs/52692 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 52692] Re: xchat-gnome crashes on 'save transcript' on blank screen
Crud. That last attachment seems to have gotten eaten. Attaching again with a less launchpad-hostile name. -- xchat-gnome crashes on 'save transcript' on blank screen https://launchpad.net/bugs/52692 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 52692] xchat-gnome crashes on 'save transcript' on blank screen
Public bug reported: Binary package hint: xchat-gnome Steps to reproduce the crash: 1. load xchat-gnome 2. type ctrl-s OR discussion-save transcript Expected result: A save dialog, or maybe that the option is disabled until there's some text in the buffer. Actual result: Segfaults every time. ** Affects: xchat-gnome (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Attachment added: Gdb backtrace http://librarian.launchpad.net/3366744/bug_%2352692_gdb_backtrace.txt -- xchat-gnome crashes on 'save transcript' on blank screen https://launchpad.net/bugs/52692 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 43450] Re: Passphrase set and stored is not what was entered
This bug doesn't seem to be present in the version of nm shipped with dapper. Everything looks good. -- Passphrase set and stored is not what was entered https://launchpad.net/bugs/43450 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
