[Bug 1012291] Re: USB disconnect
I too have this problem on when I plug my Hitatchi 2TB Touro Desk Pro into my laptop running Ubuntu 12.10, Kernel Linux 3.5.0-19-generic, GNOME 3.6.0 Dec 16 11:45:53 coralreef kernel: [ 2823.716084] usb 1-3: reset high-speed USB device number 18 using ehci_hcd Dec 16 11:46:08 coralreef kernel: [ 2838.828080] usb 1-3: device descriptor read/64, error -110 Dec 16 11:46:23 coralreef kernel: [ 2854.044087] usb 1-3: device descriptor read/64, error -110 Dec 16 11:46:23 coralreef kernel: [ 2854.260081] usb 1-3: reset high-speed USB device number 18 using ehci_hcd Dec 16 11:46:38 coralreef kernel: [ 2869.372083] usb 1-3: device descriptor read/64, error -110 Dec 16 11:46:53 coralreef kernel: [ 2884.588095] usb 1-3: device descriptor read/64, error -110 Dec 16 11:46:54 coralreef kernel: [ 2884.804063] usb 1-3: reset high-speed USB device number 18 using ehci_hcd Dec 16 11:46:59 coralreef kernel: [ 2890.216071] usb 1-3: device not accepting address 18, error -71 Dec 16 11:46:59 coralreef kernel: [ 2890.328097] usb 1-3: reset high-speed USB device number 18 using ehci_hcd Dec 16 11:47:05 coralreef kernel: [ 2895.740074] usb 1-3: device not accepting address 18, error -71 Dec 16 11:47:05 coralreef kernel: [ 2895.740142] usb 1-3: USB disconnect, device number 18 Dec 16 11:47:05 coralreef kernel: [ 2895.740176] sd 6:0:0:0: Device offlined - not ready after error recovery Dec 16 11:47:05 coralreef kernel: [ 2895.740196] sd 6:0:0:0: [sdb] Unhandled error code Dec 16 11:47:05 coralreef kernel: [ 2895.740201] sd 6:0:0:0: [sdb] Dec 16 11:47:05 coralreef kernel: [ 2895.740206] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK Dec 16 11:47:05 coralreef kernel: [ 2895.740211] sd 6:0:0:0: [sdb] CDB: Dec 16 11:47:05 coralreef kernel: [ 2895.740214] Read(10): 28 00 55 37 1b c0 00 00 f0 00 Dec 16 11:47:05 coralreef kernel: [ 2895.740237] end_request: I/O error, dev sdb, sector 1429674944 Dec 16 11:47:05 coralreef kernel: [ 2895.740244] quiet_error: 23 callbacks suppressed Dec 16 11:47:05 coralreef kernel: [ 2895.740249] Buffer I/O error on device sdb1, logical block 178709112 Dec 16 11:47:05 coralreef kernel: [ 2895.740261] Buffer I/O error on device sdb1, logical block 178709113 Dec 16 11:47:05 coralreef kernel: [ 2895.740267] Buffer I/O error on device sdb1, logical block 178709114 Dec 16 11:47:05 coralreef kernel: [ 2895.740272] Buffer I/O error on device sdb1, logical block 178709115 Dec 16 11:47:05 coralreef kernel: [ 2895.740278] Buffer I/O error on device sdb1, logical block 178709116 Dec 16 11:47:05 coralreef kernel: [ 2895.740283] Buffer I/O error on device sdb1, logical block 178709117 Dec 16 11:47:05 coralreef kernel: [ 2895.740289] Buffer I/O error on device sdb1, logical block 178709118 Dec 16 11:47:05 coralreef kernel: [ 2895.740294] Buffer I/O error on device sdb1, logical block 178709119 Dec 16 11:47:05 coralreef kernel: [ 2895.740300] Buffer I/O error on device sdb1, logical block 178709120 Dec 16 11:47:05 coralreef kernel: [ 2895.740314] Buffer I/O error on device sdb1, logical block 178709121 Dec 16 11:47:05 coralreef kernel: [ 2895.740464] sd 6:0:0:0: [sdb] Unhandled error code Dec 16 11:47:05 coralreef kernel: [ 2895.740467] sd 6:0:0:0: [sdb] Dec 16 11:47:05 coralreef kernel: [ 2895.740469] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Dec 16 11:47:05 coralreef kernel: [ 2895.740472] sd 6:0:0:0: [sdb] CDB: Dec 16 11:47:05 coralreef kernel: [ 2895.740473] Read(10): 28 00 55 37 1c b0 00 00 10 00 Dec 16 11:47:05 coralreef kernel: [ 2895.740484] end_request: I/O error, dev sdb, sector 1429675184 Dec 16 11:47:05 coralreef ntfs-3g[3467]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Dec 16 11:47:05 coralreef ntfs-3g[3467]: ntfs_attr_pread error reading '/.Other/OtherLng.tar.gz.pgp' at offset 290324480: 131072 -1: Input/output error Dec 16 11:47:05 coralreef ntfs-3g[3467]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Dec 16 11:47:05 coralreef ntfs-3g[3467]: ntfs_attr_pread error reading '/.Other/OtherLng.tar.gz.pgp' at offset 29042: 131072 -1: Input/output error Dec 16 11:47:05 coralreef ntfs-3g[3467]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Dec 16 11:47:05 coralreef ntfs-3g[3467]: ntfs_attr_pread error reading '/.Other/OtherLng.tar.gz.pgp' at offset 290324480: 4096 -1: Input/output error Dec 16 11:47:05 coralreef kernel: [ 2895.952063] usb 1-3: new high-speed USB device number 19 using ehci_hcd Dec 16 11:47:05 coralreef udisksd[1871]: Cleaning up mount point /media/clownfish/Earth (device 8:17 no longer exist) Dec 16 11:47:20 coralreef kernel: [ 2911.064130] usb 1-3: device descriptor read/64, error -110 Dec 16 11:47:35 coralreef kernel: [ 2926.280061] usb 1-3: device descriptor read/64, error -110 Dec 16 11:47:35 coralreef kernel: [ 2926.496104] usb 1-3: new high-speed USB device number 20 using ehci_hcd Dec 16 11:47:51 coralreef kernel: [ 2941.608123] usb 1-3: device descriptor read/64, error -110 Dec 16
[Bug 1012291] Re: USB disconnect
This is what I get when I first plug the drive in - Dec 16 11:56:44 coralreef mtp-probe: checking bus 1, device 27: /sys/devices/pci:00/:00:1d.7/usb1/1-6 Dec 16 11:56:44 coralreef mtp-probe: bus: 1, device: 27 was not an MTP device Dec 16 11:56:52 coralreef kernel: [ 3482.864884] scsi 7:0:0:0: Direct-Access Hitachi Hitachi HDS72302 A800 PQ: 0 ANSI: 4 Dec 16 11:56:52 coralreef kernel: [ 3482.865782] sd 7:0:0:0: Attached scsi generic sg2 type 0 Dec 16 11:56:52 coralreef kernel: [ 3482.869837] sd 7:0:0:0: [sdb] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB) Dec 16 11:56:52 coralreef kernel: [ 3482.870843] sd 7:0:0:0: [sdb] Write Protect is off Dec 16 11:56:52 coralreef kernel: [ 3482.870851] sd 7:0:0:0: [sdb] Mode Sense: 4b 00 10 08 Dec 16 11:56:52 coralreef kernel: [ 3482.871895] sd 7:0:0:0: [sdb] No Caching mode page present Dec 16 11:56:52 coralreef kernel: [ 3482.871903] sd 7:0:0:0: [sdb] Assuming drive cache: write through Dec 16 11:56:52 coralreef kernel: [ 3482.875617] sd 7:0:0:0: [sdb] No Caching mode page present Dec 16 11:56:52 coralreef kernel: [ 3482.875625] sd 7:0:0:0: [sdb] Assuming drive cache: write through Dec 16 11:56:52 coralreef kernel: [ 3482.890142] sdb: sdb1 Dec 16 11:56:52 coralreef kernel: [ 3482.893126] sd 7:0:0:0: [sdb] No Caching mode page present Dec 16 11:56:52 coralreef kernel: [ 3482.893134] sd 7:0:0:0: [sdb] Assuming drive cache: write through Dec 16 11:56:52 coralreef kernel: [ 3482.893141] sd 7:0:0:0: [sdb] Attached SCSI disk Dec 16 11:56:52 coralreef ata_id[4646]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument Dec 16 11:56:55 coralreef ntfs-3g[4663]: Version 2012.1.15AR.5 external FUSE 29 Dec 16 11:56:55 coralreef ntfs-3g[4663]: Mounted /dev/sdb1 (Read-Write, label Earth, NTFS 3.1) Dec 16 11:56:55 coralreef ntfs-3g[4663]: Cmdline options: rw,nosuid,nodev,uhelper=udisks2,uid=1000,gid=1000,dmask=0077,fmask=0177 Dec 16 11:56:55 coralreef ntfs-3g[4663]: Mount options: rw,nosuid,nodev,uhelper=udisks2,allow_other,nonempty,relatime,default_permissions,fsname=/dev/sdb1,blkdev,blksize=4096 Dec 16 11:56:55 coralreef ntfs-3g[4663]: Global ownership and permissions enforced, configuration type 7 Dec 16 11:56:55 coralreef udisksd[1871]: Mounted /dev/sdb1 at /media/clownfish/Earth on behalf of uid 1000 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] Re: USB disconnect
After copying just 230MB from this external drive to my laptop's local drive, I get the following messages in my log file and the drive disappears from view - Dec 16 11:58:54 coralreef kernel: [ 3605.052088] usb 1-6: reset high-speed USB device number 27 using ehci_hcd Dec 16 11:59:09 coralreef kernel: [ 3620.164086] usb 1-6: device descriptor read/64, error -110 Dec 16 11:59:24 coralreef kernel: [ 3635.380081] usb 1-6: device descriptor read/64, error -110 Dec 16 11:59:24 coralreef kernel: [ 3635.596095] usb 1-6: reset high-speed USB device number 27 using ehci_hcd Dec 16 11:59:40 coralreef kernel: [ 3650.708089] usb 1-6: device descriptor read/64, error -110 Dec 16 11:59:55 coralreef kernel: [ 3665.924115] usb 1-6: device descriptor read/64, error -110 Dec 16 11:59:55 coralreef kernel: [ 3666.140082] usb 1-6: reset high-speed USB device number 27 using ehci_hcd Dec 16 12:00:00 coralreef kernel: [ 3671.552053] usb 1-6: device not accepting address 27, error -71 Dec 16 12:00:01 coralreef kernel: [ 3671.664135] usb 1-6: reset high-speed USB device number 27 using ehci_hcd Dec 16 12:00:06 coralreef kernel: [ 3677.076069] usb 1-6: device not accepting address 27, error -71 Dec 16 12:00:06 coralreef kernel: [ 3677.076131] usb 1-6: USB disconnect, device number 27 Dec 16 12:00:06 coralreef kernel: [ 3677.076262] sd 7:0:0:0: Device offlined - not ready after error recovery Dec 16 12:00:06 coralreef kernel: [ 3677.080075] sd 7:0:0:0: [sdb] Unhandled error code Dec 16 12:00:06 coralreef kernel: [ 3677.080080] sd 7:0:0:0: [sdb] Dec 16 12:00:06 coralreef kernel: [ 3677.080084] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Dec 16 12:00:06 coralreef kernel: [ 3677.080087] sd 7:0:0:0: [sdb] CDB: Dec 16 12:00:06 coralreef kernel: [ 3677.080089] Read(10): 28 00 57 7b 36 38 00 00 f0 00 Dec 16 12:00:06 coralreef kernel: [ 3677.080104] end_request: I/O error, dev sdb, sector 1467692600 Dec 16 12:00:06 coralreef kernel: [ 3677.080109] quiet_error: 22 callbacks suppressed Dec 16 12:00:06 coralreef kernel: [ 3677.080116] Buffer I/O error on device sdb1, logical block 183461319 Dec 16 12:00:06 coralreef kernel: [ 3677.080131] Buffer I/O error on device sdb1, logical block 183461320 Dec 16 12:00:06 coralreef kernel: [ 3677.080135] Buffer I/O error on device sdb1, logical block 183461321 Dec 16 12:00:06 coralreef kernel: [ 3677.080138] Buffer I/O error on device sdb1, logical block 183461322 Dec 16 12:00:06 coralreef kernel: [ 3677.080141] Buffer I/O error on device sdb1, logical block 183461323 Dec 16 12:00:06 coralreef kernel: [ 3677.080144] Buffer I/O error on device sdb1, logical block 183461324 Dec 16 12:00:06 coralreef kernel: [ 3677.080147] Buffer I/O error on device sdb1, logical block 183461325 Dec 16 12:00:06 coralreef kernel: [ 3677.080150] Buffer I/O error on device sdb1, logical block 183461326 Dec 16 12:00:06 coralreef kernel: [ 3677.080154] Buffer I/O error on device sdb1, logical block 183461327 Dec 16 12:00:06 coralreef kernel: [ 3677.080160] Buffer I/O error on device sdb1, logical block 183461328 Dec 16 12:00:06 coralreef ntfs-3g[4663]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Dec 16 12:00:06 coralreef ntfs-3g[4663]: ntfs_attr_pread error reading '/.Other/OtherAngelDaph.tar.gz.pgp' at offset 230424576: 131072 -1: Input/output error Dec 16 12:00:06 coralreef ntfs-3g[4663]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Dec 16 12:00:06 coralreef ntfs-3g[4663]: ntfs_attr_pread error reading '/.Other/OtherAngelDaph.tar.gz.pgp' at offset 230555648: 131072 -1: Input/output error Dec 16 12:00:06 coralreef kernel: [ 3677.080222] sd 7:0:0:0: [sdb] Unhandled error code Dec 16 12:00:06 coralreef kernel: [ 3677.080226] sd 7:0:0:0: [sdb] Dec 16 12:00:06 coralreef kernel: [ 3677.080228] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Dec 16 12:00:06 coralreef kernel: [ 3677.080231] sd 7:0:0:0: [sdb] CDB: Dec 16 12:00:06 coralreef kernel: [ 3677.080233] Read(10): 28 00 57 7b 37 28 00 00 10 00 Dec 16 12:00:06 coralreef kernel: [ 3677.080245] end_request: I/O error, dev sdb, sector 1467692840 Dec 16 12:00:06 coralreef ntfs-3g[4663]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Dec 16 12:00:06 coralreef ntfs-3g[4663]: ntfs_attr_pread error reading '/.Other/OtherAngelDaph.tar.gz.pgp' at offset 230424576: 4096 -1: Input/output error Dec 16 12:00:06 coralreef udisksd[1871]: Cleaning up mount point /media/clownfish/Earth (device 8:17 no longer exist) Dec 16 12:00:06 coralreef kernel: [ 3677.244046] usb 1-6: new high-speed USB device number 28 using ehci_hcd Dec 16 12:00:06 coralreef ntfs-3g[4663]: Unmounting /dev/sdb1 (Earth) Dec 16 12:00:21 coralreef kernel: [ 3692.356127] usb 1-6: device descriptor read/64, error -110 Dec 16 12:00:36 coralreef kernel: [ 3707.572078] usb 1-6: device descriptor read/64, error -110 Dec 16 12:00:37 coralreef kernel: [ 3707.788055] usb 1-6: new high-speed USB device number 29 using ehci_hcd --
[Bug 1012291] Re: USB disconnect
Could this error problem be related to - https://lkml.org/lkml/2012/4/14/217 or http://www.pclinuxos.com/forum/index.php?PHPSESSID=1fq1p6kgrina6oqec0o72gss72topic=104879.15 ** Tags added: apport-collected quantal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] apport information
ApportVersion: 2.6.1-0ubuntu9 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: clownfish 2029 F pulseaudio CRDA: country GB: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5490 - 5710 @ 40), (N/A, 27), DFS DistroRelease: Ubuntu 12.10 HibernationDevice: RESUME=UUID=b9630887-c9ce-4681-8be1-c5a0b672bfcc InstallationDate: Installed on 2012-12-09 (7 days ago) InstallationMedia: Ubuntu GNOME Remix 12.10 Quantal Quetzal - Release i386(20121018) MachineType: Dell Inc. Precision M90 MarkForUpload: True NonfreeKernelModules: nvidia Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB:en TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-19-generic root=UUID=d6f51bc8-4a52-4a68-bab3-e9243d6005dc ro quiet splash ProcVersionSignature: Ubuntu 3.5.0-19.30-generic 3.5.7 RelatedPackageVersions: linux-restricted-modules-3.5.0-19-generic N/A linux-backports-modules-3.5.0-19-generic N/A linux-firmware1.95 Tags: quantal Uname: Linux 3.5.0-19-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 10/16/2008 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.name: 0YD632 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA08:bd10/16/2008:svnDellInc.:pnPrecisionM90:pvr:rvnDellInc.:rn0YD632:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Precision M90 dmi.sys.vendor: Dell Inc. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] AlsaInfo.txt
apport information ** Attachment added: AlsaInfo.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461243/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] BootDmesg.txt
apport information ** Attachment added: BootDmesg.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461244/+files/BootDmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] CurrentDmesg.txt
apport information ** Attachment added: CurrentDmesg.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461245/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] IwConfig.txt
apport information ** Attachment added: IwConfig.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461246/+files/IwConfig.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] Lspci.txt
apport information ** Attachment added: Lspci.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461247/+files/Lspci.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] Lsusb.txt
apport information ** Attachment added: Lsusb.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461248/+files/Lsusb.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461249/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] ProcInterrupts.txt
apport information ** Attachment added: ProcInterrupts.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461250/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] ProcModules.txt
apport information ** Attachment added: ProcModules.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461251/+files/ProcModules.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] PulseList.txt
apport information ** Attachment added: PulseList.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461252/+files/PulseList.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] RfKill.txt
apport information ** Attachment added: RfKill.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461253/+files/RfKill.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] UdevDb.txt
apport information ** Attachment added: UdevDb.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461254/+files/UdevDb.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] UdevLog.txt
apport information ** Attachment added: UdevLog.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461255/+files/UdevLog.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] WifiSyslog.txt
apport information ** Attachment added: WifiSyslog.txt https://bugs.launchpad.net/bugs/1012291/+attachment/3461256/+files/WifiSyslog.txt ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012291] Re: USB disconnect
One last point, this is a USB 3 drive being plugged into a laptop (Dell Precision M90) which only has USB 2. None of the external USB hard drives I use on this laptop have this problem. Just though that may help? Please let me know if you need any further information or would like me to perform any tests as I would be more than happy to do so as this problem is driving me nuts! Many thanks -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012291 Title: USB disconnect To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1087418] Re: NVIDIA FX2500 Broken
I have now had to rebuild my laptop and now running 3.5.0-17-generic kernel and all is working again. When I perform a sudo apt-get upgrade, it informs me that there is a new kernal available but it is holding it back. This is obviously 3.7.0-4.12-generic but this time, I will not force the upgrade as I know this will break! The following packages have been kept back: aisleriot gir1.2-totem-1.0 gnome-control-center gnome-control-center-data libtotem0 libtracker-extract-0.14-0 libtracker-miner-0.14-0 libtracker-sparql-0.14-0 linux-headers-generic linux-image-generic totem totem-common totem-plugins tracker tracker-extract tracker-gui tracker-miner-fs tracker-utils 0 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1087418 Title: NVIDIA FX2500 Broken To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/1087418/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1087773] [NEW] Backlight Not Working
Public bug reported: Screen is always dim, cannot force the backlight on. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: xorg 1:7.7+1ubuntu4 ProcVersionSignature: Ubuntu 3.7.0-4.12-generic 3.7.0-rc7 Uname: Linux 3.7.0-4-generic i686 ApportVersion: 2.6.1-0ubuntu6 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Fri Dec 7 16:37:22 2012 DistUpgraded: Fresh install DistroCodename: quantal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation G71 [Quadro FX 2500M] [10de:029a] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:019b] InstallationDate: Installed on 2012-09-22 (76 days ago) InstallationMedia: Ubuntu GNOME Remix 12.10 Quantal Quetzal - Alpha i386(20120912) MachineType: Dell Inc. Precision M90 MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en TERM=unknown PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.7.0-4-generic root=UUID=e6a51b8d-824e-43e1-af98-262856fd3f72 ro vesafb.invalid=1 plymouth:debug nopat drm.debug=0xe SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/16/2008 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.name: 0YD632 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA08:bd10/16/2008:svnDellInc.:pnPrecisionM90:pvr:rvnDellInc.:rn0YD632:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Precision M90 dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.40+git20121123.171666e4-0ubuntu0ricotz2~quantal version.libgl1-mesa-dri: libgl1-mesa-dri 9.1~git20121204.ec83535c-0ubuntu0ricotz~quantal version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.1~git20121204.ec83535c-0ubuntu0ricotz~quantal version.xserver-xorg-core: xserver-xorg-core 2:1.13.0.902+git20121207+server-1.13-branch.ede07c1a-0ubuntu0ricotz~quantal version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.0.99+git20121126.60cd6cea-0ubuntu0sarvatt~quantal version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.15+git20121203.6f675eea-0ubuntu0sarvatt~quantal version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.4+git20121126.3b33a0b4-0ubuntu0sarvatt~quantal ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 possible-manual-nvidia-install quantal third-party-packages ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1087773 Title: Backlight Not Working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1087773/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1087418] [NEW] NVIDIA FX2500 Broken
Public bug reported: Updated to the latest kernel 3.7.0-4-generic and this has broke my resolution which has dropped to 1024x768. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: xorg 1:7.7+1ubuntu4 ProcVersionSignature: Ubuntu 3.7.0-4.12-generic 3.7.0-rc7 Uname: Linux 3.7.0-4-generic i686 ApportVersion: 2.6.1-0ubuntu6 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Thu Dec 6 20:03:50 2012 DistUpgraded: Fresh install DistroCodename: quantal DistroVariant: ubuntu DkmsStatus: nvidia-current-updates, 304.51: added ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation G71 [Quadro FX 2500M] [10de:029a] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:019b] InstallationDate: Installed on 2012-09-22 (75 days ago) InstallationMedia: Ubuntu GNOME Remix 12.10 Quantal Quetzal - Alpha i386(20120912) MachineType: Dell Inc. Precision M90 MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en TERM=unknown PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.7.0-4-generic root=UUID=e6a51b8d-824e-43e1-af98-262856fd3f72 ro SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/16/2008 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.name: 0YD632 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA08:bd10/16/2008:svnDellInc.:pnPrecisionM90:pvr:rvnDellInc.:rn0YD632:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Precision M90 dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.40+git20121123.171666e4-0ubuntu0ricotz2~quantal version.libgl1-mesa-dri: libgl1-mesa-dri 9.1~git20121204.ec83535c-0ubuntu0ricotz~quantal version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.1~git20121204.ec83535c-0ubuntu0ricotz~quantal version.xserver-xorg-core: xserver-xorg-core 2:1.13.0.901+git20121123+server-1.13-branch.c0e68f8e-0ubuntu0ricotz~quantal version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.0.99+git20121126.60cd6cea-0ubuntu0sarvatt~quantal version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.15+git20121203.6f675eea-0ubuntu0sarvatt~quantal version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.4+git20121126.3b33a0b4-0ubuntu0sarvatt~quantal ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 possible-manual-nvidia-install quantal third-party-packages ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1087418 Title: NVIDIA FX2500 Broken To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1087418/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 899244] Re: GMA500 psb_gfx
I too have this problem and would love to see a fix to this -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/899244 Title: GMA500 psb_gfx To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/899244/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 916197] [NEW] package libreoffice-common (not installed) failed to install/upgrade: subprocess installed post-installation script returned error exit status 127
Public bug reported: Problems with libra office after upgrading from 11.10 to 12.04 ProblemType: Package DistroRelease: Ubuntu 12.04 Package: libreoffice-common (not installed) ProcVersionSignature: Ubuntu 3.0.0-14.23-generic 3.0.9 Uname: Linux 3.0.0-14-generic i686 NonfreeKernelModules: nvidia ApportVersion: 1.90-0ubuntu2 Architecture: i386 Date: Fri Jan 13 18:58:27 2012 ErrorMessage: subprocess installed post-installation script returned error exit status 127 InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Beta i386 (20110921.2) SourcePackage: libreoffice Title: package libreoffice-common (not installed) failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 UpgradeStatus: Upgraded to precise on 2012-01-13 (0 days ago) ** Affects: libreoffice (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 precise -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/916197 Title: package libreoffice-common (not installed) failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/916197/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 916197] Re: package libreoffice-common (not installed) failed to install/upgrade: subprocess installed post-installation script returned error exit status 127
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/916197 Title: package libreoffice-common (not installed) failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/916197/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 684894] [NEW] package grub-pc 1.98-1ubuntu9 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127
Public bug reported: Did not install after update ProblemType: Package DistroRelease: Ubuntu 10.04 Package: grub-pc 1.98-1ubuntu9 ProcVersionSignature: Ubuntu 2.6.32-26.48-generic 2.6.32.24+drm33.11 Uname: Linux 2.6.32-26-generic i686 Architecture: i386 Date: Fri Dec 3 18:31:21 2010 ErrorMessage: subprocess installed post-installation script returned error exit status 127 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) SourcePackage: grub2 Title: package grub-pc 1.98-1ubuntu9 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 ** Affects: ubuntu Importance: Undecided Status: New ** Tags: apport-package i386 lucid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/684894 Title: package grub-pc 1.98-1ubuntu9 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 684894] Re: package grub-pc 1.98-1ubuntu9 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/684894 Title: package grub-pc 1.98-1ubuntu9 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 684004] [NEW] package linux-image-2.6.32-26-generic 2.6.32-26.48 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127
Public bug reported: Binary package hint: grub2 Would not install kernal after update ProblemType: Package DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-26-generic 2.6.32-26.48 ProcVersionSignature: Ubuntu 2.6.32-26.48-generic 2.6.32.24+drm33.11 Uname: Linux 2.6.32-26-generic i686 Architecture: i386 Date: Thu Dec 2 06:21:33 2010 ErrorMessage: subprocess installed post-installation script returned error exit status 127 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) SourcePackage: grub2 Title: package linux-image-2.6.32-26-generic 2.6.32-26.48 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 ** Affects: grub2 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 lucid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/684004 Title: package linux-image-2.6.32-26-generic 2.6.32-26.48 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 684004] Re: package linux-image-2.6.32-26-generic 2.6.32-26.48 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/684004 Title: package linux-image-2.6.32-26-generic 2.6.32-26.48 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 648795] [NEW] package python-virtkey 0.60.0-0ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 648695 *** https://bugs.launchpad.net/bugs/648695 Public bug reported: Just updating my my 10.10 beta release and it failed to install. ProblemType: Package DistroRelease: Ubuntu 10.10 Package: python-virtkey 0.60.0-0ubuntu1 ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4 Uname: Linux 2.6.35-22-generic i686 NonfreeKernelModules: nvidia Architecture: i386 Date: Mon Sep 27 13:18:26 2010 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationMedia: Ubuntu 10.04 Lucid Lynx - Alpha i386 (20100224.1) SourcePackage: virtkey Title: package python-virtkey 0.60.0-0ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 ** Affects: virtkey (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 maverick -- package python-virtkey 0.60.0-0ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 https://bugs.launchpad.net/bugs/648795 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 648795] Re: package python-virtkey 0.60.0-0ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 648695 *** https://bugs.launchpad.net/bugs/648695 ** Attachment added: AptOrdering.txt https://bugs.launchpad.net/bugs/648795/+attachment/1643162/+files/AptOrdering.txt ** Attachment added: Dependencies.txt https://bugs.launchpad.net/bugs/648795/+attachment/1643163/+files/Dependencies.txt ** Attachment added: Df.txt https://bugs.launchpad.net/bugs/648795/+attachment/1643164/+files/Df.txt ** Attachment added: Dmesg.txt https://bugs.launchpad.net/bugs/648795/+attachment/1643165/+files/Dmesg.txt ** Attachment added: DpkgTerminalLog.gz https://bugs.launchpad.net/bugs/648795/+attachment/1643166/+files/DpkgTerminalLog.gz -- package python-virtkey 0.60.0-0ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 https://bugs.launchpad.net/bugs/648795 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 5608] Re: SWAT expects to authenticate as root
Still a problem with 10.10 beta. Ane-Pieter Wieringa's work around works though. -- SWAT expects to authenticate as root https://bugs.launchpad.net/bugs/5608 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 5608] Re: SWAT expects to authenticate as root
Still a problem with 10.10 beta. Ane-Pieter Wieringa's work around works though. -- SWAT expects to authenticate as root https://bugs.launchpad.net/bugs/5608 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 554172] Re: CUPS and other system services not starting at boot
So here is the strange thing, periodically my printer is available so CUPS must start under certain circumstances. It is not very often but occasionally my printer is there. I will try and work out under what conditions CUPS is starting. There is not many times I moan about open source as I am a huge fan of everything open source. However, if an organisation rolled out 10:04 and their users could not print, I think they would be amazed at how long this is taking to fix. Maybe it is just affecting a few people who run a certain type of system? I am getting a Dell Mini 10 in a week or so, so I will install 10:04 on that and see if I get the same issue. I am happy to upload any log files which may help. -- CUPS and other system services not starting at boot https://bugs.launchpad.net/bugs/554172 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 554172] Re: cups not starting at boot
I have run 10.04 through Alpha and did not see the problem even after 10.04 was released. I only had the problem after the first official update to the live 10.04. I continually have to run sudo service cups start to start the printer. Are there any log files /detail I can upload to help with the problem? -- cups not starting at boot https://bugs.launchpad.net/bugs/554172 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 497299] Re: upstart not starting init-scripts (event net-device-up IFACE=lo missing)
Just come here from bug https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/554172. Cups is not auto starting since I updated with the first major patch release for 10.04. Just updated again and still cups will not auto start. Now have to start it manually every time I want to print. Can I post any log files which would be of use? -- upstart not starting init-scripts (event net-device-up IFACE=lo missing) https://bugs.launchpad.net/bugs/497299 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 560903] Re: brasero assert failure: *** glibc detected *** brasero: double free or corruption (fasttop): 0x08fdd340 ***
I downloaded valgrind and opened up the Brasero but I cannot get it to crash under valgrind. As soon as I load Brasero on its own, I can force it to crash! Could this be something to do with valgrind causing the slowdown of the application? To make it crash, I start Brasero up without a CD in the drive. I then click on the Audio project button. I then insert a CD into the drive. As the CD drive is imitating the CD disk, I click on Project, New Project, New Audio Project Brasero closes (sometimes with an error other times just closes). Hope some of that helps? -- brasero assert failure: *** glibc detected *** brasero: double free or corruption (fasttop): 0x08fdd340 *** https://bugs.launchpad.net/bugs/560903 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 331589] Re: Extremely loud and intrusive system beep with (some?) HD Audio devices
Just loaded Ubuntu 10.04 (Kernel 2.6.32-15-generic, fully patched as of 06/03/2010 7:24 GMT) and still have the same sound problems as before. No sound until you turn the volume my volume up and then it nearly blows my speakers. I have seen this problem through 9.10 to the latest release. -- Extremely loud and intrusive system beep with (some?) HD Audio devices https://bugs.launchpad.net/bugs/331589 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 331589] Re: Extremely loud and intrusive system beep with (some?) HD Audio devices
Forgot to add - Dell Precision M90 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) Subsystem: Dell Device 01cf Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- -- Extremely loud and intrusive system beep with (some?) HD Audio devices https://bugs.launchpad.net/bugs/331589 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 410948] Re: Volume too loud
Same problem as above with DELL Precision M90. My sound is unusable and have muted it so not to blow the speakers up! -- Volume too loud https://bugs.launchpad.net/bugs/410948 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 410948] Re: Volume too loud
@Daniel T Chen, Within Sound Preferences, I have now set the master output volume as low as it will go and then adjusted each applications volume down to an acceptable level so I now have sounds again. Many thanks for your help though. -- Volume too loud https://bugs.launchpad.net/bugs/410948 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 331589] Re: system beep in jaunty is the most annoying sound known to man
I upgraded and I get this every time I shut down. It is VERY loud. -- system beep in jaunty is the most annoying sound known to man https://bugs.launchpad.net/bugs/331589 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 331589] Re: system beep in jaunty is the most annoying sound known to man
I am running the beta as of 27/03 and have a DELL Precision M90. I get this beep when I shutdown and it is VERY LOUD! I too do not have any setting in the Volume control to turn this off -- system beep in jaunty is the most annoying sound known to man https://bugs.launchpad.net/bugs/331589 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
