[Bug 1926205] Re: graphic interface faulty
1. No, this is not the duplicate of of bug 1890891 because 1890891 is only about ""When I boot my system I have to wait at least 20 - 30 seconds for the application icons to load on dock." Or now, in this one, I see the same slow load of dock, at the beginning, but then, the user LOOSES CONTROL of windows and work-spaces, + mouse clicks become ineffective. When you click on the "close windows" red cross, for example, it is not closing the window. User can not change work-spaces, neither, go from workspace 1 to workspace 2, which becomes "continuous" on the screen. So this bug is much more worst then 1890891. 2. No, I do not use anymore 21.04. I reverted to 20.04.2 LTS which run just fine. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1926205 Title: graphic interface faulty To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1926205/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1926205] Re: graphic interface faulty
Thank you Daniel, 1. Yes, the same as the bug 1874578, but even worst because after a some time, there is a loss of windowing and work-spaces, and mouse clicks. Yes, "When I boot my system I have to wait at least 20 - 30 seconds for the application icons to load on dock." With SSD disk! 2. I had no Extensions. This happened on a fresh basic "normal" install, Work-spaces reduced to 0. 3. I did not check with "Top" command, but I check with System Monitor, process tab, and there was no any process persistently and excessively eating CPU resources. In fact, now I erased the 21.04 now and reverted to 20.04.2 LTS which run smoothly and absolutely with no any smallest problem. Really - nothing, but on the same computer. The dock loads instantaneously, there is no loss of windows and and workspace control. Now, my extensions and apps are all installed too, and are all running fine. In the present form, 20.04 is useless for me. I can not use it. This is the first time in my life (With Ubuntu :) it happens - being unable to use the short-term release. Maybe this is because the hardware platform (AMD). Something is really faulty. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1926205 Title: graphic interface faulty To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1926205/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1926205] Re: graphic interface faulty
Confirmation: with Ubuntu 20.04.2 LTS everything works just fine, smooth, fast, sound and brilliant, as usual. Boot is fast and left side dock loads instantly. Touch screen + mouse - no problem. Dynamic work-spaces - no any problem. Even "contacts" Gnome application connect to Google account, which is not done under 21.04 so, the problems are really somewhere in the 21.04 release; HP ENVY x360 hardware platform (AMD® Ryzen 5 4500u with Radeon graphics, AMD® Renoir) is ok and compatible. if I can do something to help debug this problem, please message me. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1926205 Title: graphic interface faulty To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1926205/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1926205] Re: graphic interface faulty
even running with only 1 workspace enabled, the things degrade slowly. After some time of use, the program windows do not react to the mouse clicks (close, reduce..). Then, no any mouse click give any effect. One solution is to reboot using shell or, even worst - the off button. I reverse to 20.04.2.0 LTS to check if the problems are coming from the hardware, or OS version. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1926205 Title: graphic interface faulty To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1926205/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1926205] [NEW] graphic interface faulty
Public bug reported: hi, first, after boot and log-in, the interface elements are slow to display. the left-screen dock is empty and shows only after some time. then, I must wait to have access to program (applications) menu ("Activities"). the graphic interface itself become buggy and faulty when using multi- workspace (dynamic work-spaces displays). when I launch a program on second workspace screen: the mouse click stop to have any result (mouse and touchpad) then, I can not change workspace. then, programs freezes I need to reboot the computer to regain any control. I try 20.04.2.0 LTS on this computer, witch works fine. no any smallest problem. Description:Ubuntu 21.04 Release:21.04 ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: xorg 1:7.7+22ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-16.17-generic 5.11.12 Uname: Linux 5.11.0-16-generic x86_64 ApportVersion: 2.20.11-0ubuntu65 Architecture: amd64 BootLog: Error: [Errno 13] Permission non accordée: '/var/log/boot.log' CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Mon Apr 26 22:07:16 2021 DistUpgraded: Fresh install DistroCodename: hirsute DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Renoir [1002:1636] (rev c3) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Renoir [103c:876e] InstallationDate: Installed on 2021-04-25 (1 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) MachineType: HP HP ENVY x360 Convertible 13-ay0xxx ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-16-generic root=UUID=d493468f-47f4-4515-898b-919d7fdf1949 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/10/2020 dmi.bios.release: 15.16 dmi.bios.vendor: Insyde dmi.bios.version: F.16 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 876E dmi.board.vendor: HP dmi.board.version: 12.43 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 31 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 12.43 dmi.modalias: dmi:bvnInsyde:bvrF.16:bd12/10/2020:br15.16:efr12.43:svnHP:pnHPENVYx360Convertible13-ay0xxx:pvrType1ProductConfigId:rvnHP:rn876E:rvr12.43:cvnHP:ct31:cvrChassisVersion: dmi.product.family: 103C_5335KV HP Envy dmi.product.name: HP ENVY x360 Convertible 13-ay0xxx dmi.product.sku: 2U6C7EA#ABZ dmi.product.version: Type1ProductConfigId dmi.sys.vendor: HP version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.104-1build1 version.libgl1-mesa-dri: libgl1-mesa-dri 21.0.1-2 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.11-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200714-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-1 ** Affects: ubuntu Importance: Undecided Status: New ** Tags: amd64 apport-bug corruption hirsute ubuntu wayland-session -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1926205 Title: graphic interface faulty To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1926205/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1926205] Re: graphic interface faulty
this is not Xorg problem. the same happen on Wayland ("Ubuntu" option when log in. keep working! I love Ubuntu since 15 years! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1926205 Title: graphic interface faulty To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1926205/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1477728] Re: Vivid VPN does not connect, "No valid VPN secrets"
after the latest updates, VPN does not launch at all. So - I dont have VPN at all... (ppp type, native Network Manager configuration, 15.04 Ubuntu version) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1477728 Title: Vivid VPN does not connect, "No valid VPN secrets" To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1477728/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1477728] Re: Vivid VPN does not connect, "No valid VPN secrets"
I don't know if it's coming from network-manager, or from something else, I'm not the Linux specialist. All I know, is that it is working some times, and at some another moment, it does not start a connexion at all. So, in order to know what's happen, I disabled "memorise password" to get a prompt at a start of the VPN. During former 4 weeks, everything worked ok : when I was clicking on the "connect VPN" option, the password window appeared and I was able to connect. Right now, since 1 week, again, it does not work and I can not connect: when I click on "connect VPM" in the network menu, nothing happen. It's ultimately annoying... -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1477728 Title: Vivid VPN does not connect, "No valid VPN secrets" To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1477728/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1300097] Re: NetworkManager VPN openconnect fails to connect on 14.04 after update
I use VPN in every Ubuntu version, usually pptp type. Starting with Vivid new problem raised: the connection, which is properly configured and working first time after the fresh OS installation, does not initiate when the computer is rebooted. Scenario: - installing Vivid, from scratch - configuring WiFi access - connecting to the WiFi - verifying: everything works fine, including Internet access and browsing - using right-screen network icon, creating the VPN pptp tunnel - connecting to the VPN, animated wifi icon runs and connects - checking : everything works fine reboot - reconnecting to the WiFi with the menu icon: ok - checking : Internet works, everything OK - clicking on VPN name connection in the network menu in the right, upper side menu icon: nothing happens. There is no usual connecting animated icon, the VPN does not starts - rebooting, restarting network manager, recreating the new VPN under the new name does not solve the problem. Trying with the nmcli from Terminal au a normal user: $ nmcli con up vpnname (or sudo nmcli con up vpnname) nothing happens. After the 90 seconds, there is a time-out message . Connecting as a root: root@ nmcli con up vpnname instantaneous message : No valid VPN secrets Restarting the network-manager does not solve the problem. In /etc/NetworkManager/system-connections/ConnectionName there is a small binary file under the VPN connexion name, it is impossible to edit it. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1300097 Title: NetworkManager VPN openconnect fails to connect on 14.04 after update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager-openconnect/+bug/1300097/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 508740] Re: PPTP VPN no valid VPN secrets
I use VPN in every Ubuntu version, usually pptp type. Starting with Vivid new problem raised: the connection, which is properly configured and working first time after the fresh OS installation, does not initiate when the computer is rebooted. Scenario: - installing Vivid, from scratch - configuring WiFi access - connecting to the WiFi - verifying: everything works fine, including Internet access and browsing - using right-screen network icon, creating the VPN pptp tunnel - connecting to the VPN, animated wifi icon runs and connects - checking : everything works fine reboot - reconnecting to the WiFi with the menu icon: ok - checking : Internet works, everything OK - clicking on VPN name connection in the network menu in the right, upper side menu icon: nothing happens. There is no usual connecting animated icon, the VPN does not starts - rebooting, restarting network manager, recreating the new VPN under the new name does not solve the problem. Trying with the nmcli from Terminal au a normal user: $ nmcli con up vpnname (or sudo nmcli con up vpnname) nothing happens. After the 90 seconds, there is a time-out message . Connecting as a root: root@ nmcli con up vpnname instantaneous message : No valid VPN secrets Restarting the network-manager does not solve the problem. In /etc/NetworkManager/system-connections/ConnectionName there is a small binary file under the VPN connexion name, it is impossible to edit it. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/508740 Title: PPTP VPN no valid VPN secrets To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager-pptp/+bug/508740/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1477728] [NEW] Vivid VPN does not connect, No valid VPN secrets
Public bug reported: I use VPN in every Ubuntu version, usually pptp type. Starting with Vivid new problem raised: the connection, which is properly configured and working first time after the fresh OS installation, does not initiate when the computer is rebooted. Scenario: - installing Vivid, from scratch - configuring WiFi access - connecting to the WiFi - verifying: everything works fine, including Internet access and browsing - using right-screen network icon, creating the VPN pptp tunnel - connecting to the VPN, animated wifi icon runs and connects - checking : everything works fine reboot - reconnecting to the WiFi with the menu icon: ok - checking : Internet works, everything OK - clicking on VPN name connection in the network menu in the right, upper side menu icon: nothing happens. There is no usual connecting animated icon, the VPN does not starts - rebooting, restarting network manager, recreating the new VPN under the new name does not solve the problem. Trying with the nmcli from Terminal au a normal user: $ nmcli con up vpnname (or sudo nmcli con up vpnname) nothing happens. After the 90 seconds, there is a time-out message . Connecting as a root: root@ nmcli con up vpnname instantaneous message : No valid VPN secrets Restarting the network-manager does not solve the problem. In /etc/NetworkManager/system-connections/ConnectionName there is a small binary file under the VPN connexion name, it is impossible to edit it. The same situation occurs with other VPN types; I tried OpenVPN. ** Affects: ubuntu Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1477728 Title: Vivid VPN does not connect, No valid VPN secrets To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1477728/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1403756] [NEW] nvidia-331 331.113-0ubuntu0.1: nvidia-331 kernel module failed to build
Public bug reported: during today update of the all frech, newly installed 2 days ago) and updated system ProblemType: Package DistroRelease: Ubuntu 14.10 Package: nvidia-331 331.113-0ubuntu0.1 ProcVersionSignature: Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1 Uname: Linux 3.16.0-28-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 DKMSKernelVersion: 3.16.0-29-generic Date: Thu Dec 18 08:01:32 2014 InstallationDate: Installed on 2014-12-17 (0 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) PackageVersion: 331.113-0ubuntu0.1 SourcePackage: nvidia-graphics-drivers-331 Title: nvidia-331 331.113-0ubuntu0.1: nvidia-331 kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: nvidia-graphics-drivers-331 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package utopic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1403756 Title: nvidia-331 331.113-0ubuntu0.1: nvidia-331 kernel module failed to build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1403756/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1396546] [NEW] nvidia-331 331.89-0ubuntu5: nvidia-331 kernel module failed to build
Public bug reported: during update ProblemType: Package DistroRelease: Ubuntu 14.10 Package: nvidia-331 331.89-0ubuntu5 ProcVersionSignature: Ubuntu 3.16.0-26.34-generic 3.16.7-ckt1 Uname: Linux 3.16.0-26-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 DKMSKernelVersion: 3.16.0-26-generic Date: Wed Nov 26 11:30:08 2014 InstallationDate: Installed on 2014-10-24 (33 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) PackageVersion: 331.89-0ubuntu5 SourcePackage: nvidia-graphics-drivers-331 Title: nvidia-331 331.89-0ubuntu5: nvidia-331 kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: nvidia-graphics-drivers-331 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package utopic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1396546 Title: nvidia-331 331.89-0ubuntu5: nvidia-331 kernel module failed to build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1396546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1034366] Re: Version 12.04 (precise) network printing problem
tested. installed fresch 12.04 from scratch on IBM T61p notebook, done all updates and installed graphic driver. installed 2100 default driver. printed test page. it works. so... I don't know something went wrong during the first install of my other 12.04 workstation... so, thank you for a hand, the topic is closed - there is no problem with precise. I have a problem with my installation. butt will solve it myself, re- installing all from scratch (the other computer still do not print...) thank you again, ** Changed in: hplip (Ubuntu) Status: New = Invalid ** Changed in: hplip (Ubuntu) Assignee: (unassigned) = arturpio (arturpio-cyberkit) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1034366 Title: Version 12.04 (precise) network printing problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1034366/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1034366] Re: Version 12.04 (precise) network printing problem
topic closed - problem solved -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1034366 Title: Version 12.04 (precise) network printing problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1034366/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1034366] Re: Version 12.04 (precise) network printing problem
bug report reactivated after test ** Changed in: hplip (Ubuntu) Status: Invalid = Incomplete ** Changed in: hplip (Ubuntu) Assignee: arturpio (arturpio-cyberkit) = (unassigned) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1034366 Title: Version 12.04 (precise) network printing problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1034366/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1034366] Re: Version 12.04 (precise) network printing problem
sorry, not ended... I did some more testing with this newly installed 12.04 test IBM T61p notebook. after the installation, it printed without problems. When I activated the print server (activated shared printers, publish printers on this computer etc. in the menu) it stopped to print. there is no way to print now, even with all server options desactivated. so, there IS a problem with this printing server... is it within the CUPS? ** Changed in: hplip (Ubuntu) Status: Incomplete = New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1034366 Title: Version 12.04 (precise) network printing problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1034366/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1034366] Re: Version 12.04 (precise) network printing problem
re-testing - 1. installed new, fresch 12.04 64 bit from scratch on IBM T61p laptop 2. installed HP Laserjet 2100 network printer with default Foomatic/pxlmono (en) recommended diver 3. printing test page -- OK 4. switched to WiFi link, disconnecting eth0 cable 5. re-printing --- OK 6. reswitching to eth0 cable, re-printing test page --- OK 7. enabling all basic server settings 8. reprinting test page --- OK 9. disabling all basic server setting, reprinting --- all OK 10. checking CUPS on localhost:631 --- version 1.5.2 updating 12.04 todate . time .. 379 updates . 11. checking CUPS version 1.5.3 12. printing test page --- OK 13. enabling all basic server settings, printing OK 14. reboot, printing --- ok 15. disconetting from eth0, reconnecting trough WiFi, printing --- OK 16. disconnecting from WiFi, reconnecting trough eth0, printing --- OK it prints... no problem. wow! so, I will do some more tests... -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1034366 Title: Version 12.04 (precise) network printing problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1034366/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1034366] Re: Version 12.04 (precise) network printing problem
Found on the workstation where it did'nt print, the eth0 interface was incorrectly configurated. The configuration is manual, not via DHCP. The mask was 255.255.255.255 instead of required 255.255.255.0 Everything worked well (Internet access, ping, etc. etc) except ethernet printing to this HP laserjet 2100 printer... well... sorry for disturbance, everything is ok by now. thanks again for patience and suggestions this topic is finally totally closed! ** Changed in: hplip (Ubuntu) Status: New = Invalid ** Changed in: hplip (Ubuntu) Assignee: (unassigned) = arturpio (arturpio-cyberkit) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1034366 Title: Version 12.04 (precise) network printing problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1034366/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1034366] [NEW] Version 12.04 (precise) network printing problem
Public bug reported: Unable to print from any application of any 12.04 (precise) fresh- installed Ubuntu desktop trough Ethernet connection to the HP Laserjet 2100 printer connected to the LAN swich. The printer works well if printing is done from older Ubuntu desktops. The printing resumes with 12.04 if connection is established from 12.04 workstation trough WiFi AP link to the same LAN network. The Ethernet connection works well, except for printing. Please find here some testing printscreens as attached files. ** Affects: ubuntu Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1034366 Title: Version 12.04 (precise) network printing problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1034366/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1034366] Re: Version 12.04 (precise) network printing problem
** Attachment added: Network printing 12.04 bug.txt https://bugs.launchpad.net/bugs/1034366/+attachment/3252647/+files/Network%20printing%2012.04%20bug.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1034366 Title: Version 12.04 (precise) network printing problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1034366/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1034366] Re: Version 12.04 (precise) network printing problem
IP address : HP Laserjet 2100tn is connected to the LAN as 192.168.1.13 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1034366 Title: Version 12.04 (precise) network printing problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1034366/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1034366] Re: Version 12.04 (precise) network printing problem
this is the CUPS error log ** Attachment added: CUPS error log https://bugs.launchpad.net/ubuntu/+bug/1034366/+attachment/3252657/+files/Network%20printing%2012.04%20bug%20CUPS%20error%20log.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1034366 Title: Version 12.04 (precise) network printing problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1034366/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 634571] Re: vinagre fails to connect to any VNC server
- installed fresch Maverick 10.10 desktop i386 today from scratch - trying outgoing VNC and SSH links from Maverick to Lucid (working) machine. It still fails to connect, returning Connection to host xxx was closed message - backward connection from 10.04 Lucid computer works as a SSH conole link but VNC does not work this is a serious issue... -- vinagre fails to connect to any VNC server https://bugs.launchpad.net/bugs/634571 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 637612] Re: grub problem with Compaq Smart 2/P Array Controller
This problem happen even with recognition of the RAID disk created with parted utility... il fact, there is a solution: - launch Windows XP installation - erase the RAID Array (logical unit) with Windows installation option, suppress any partition - create new partition table, format it as the NTFS unit - install Windows XP - relaunch the system and install Debian or Ubuntu. this way, it works. so, the problem is somwhere in the partition table of the Array, not only with grub... -- grub problem with Compaq Smart 2/P Array Controller https://bugs.launchpad.net/bugs/637612 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 648807] [NEW] package python-virtkey 0.60 .0-0ubuntu1 failed to install/upgrade: podproces zains talowany skrypt post-installation zwrócił kod b łędu 1
*** This bug is a duplicate of bug 648695 *** https://bugs.launchpad.net/bugs/648695 Public bug reported: during standard update ProblemType: Package DistroRelease: Ubuntu 10.10 Package: python-virtkey 0.60.0-0ubuntu1 ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4 Uname: Linux 2.6.35-22-generic i686 Architecture: i386 Date: Mon Sep 27 14:26:50 2010 ErrorMessage: podproces zainstalowany skrypt post-installation zwrócił kod błędu 1 InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Beta i386 (20100901.1) SourcePackage: virtkey Title: package python-virtkey 0.60.0-0ubuntu1 failed to install/upgrade: podproces zainstalowany skrypt post-installation zwrócił kod błędu 1 ** Affects: virtkey (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 maverick -- package python-virtkey 0.60.0-0ubuntu1 failed to install/upgrade: podproces zainstalowany skrypt post-installation zwrócił kod błędu 1 https://bugs.launchpad.net/bugs/648807 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 648807] Re: package python-virtkey 0.60.0 -0ubuntu1 failed to install/upgrade: podproces zainstalo wany skrypt post-installation zwrócił kod b łędu 1
*** This bug is a duplicate of bug 648695 *** https://bugs.launchpad.net/bugs/648695 ** Attachment added: AptOrdering.txt https://bugs.launchpad.net/bugs/648807/+attachment/1643224/+files/AptOrdering.txt ** Attachment added: Dependencies.txt https://bugs.launchpad.net/bugs/648807/+attachment/1643225/+files/Dependencies.txt ** Attachment added: Df.txt https://bugs.launchpad.net/bugs/648807/+attachment/1643226/+files/Df.txt ** Attachment added: Dmesg.txt https://bugs.launchpad.net/bugs/648807/+attachment/1643227/+files/Dmesg.txt ** Attachment added: DpkgTerminalLog.gz https://bugs.launchpad.net/bugs/648807/+attachment/1643228/+files/DpkgTerminalLog.gz -- package python-virtkey 0.60.0-0ubuntu1 failed to install/upgrade: podproces zainstalowany skrypt post-installation zwrócił kod błędu 1 https://bugs.launchpad.net/bugs/648807 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 637612] [NEW] grub problem with Compaq Smart 2/P Array Controller
Public bug reported: re: Ubuntu 10.04 server i386 Does not boot from Compaq Smart 2/P RAID Array Controller. Installation terminates ok, without errors. Created partitions shows in gparted of Live CD and are ok. But, when booting from such array, the following erros is shown: Out of disk, the system halt and does not load. The identical installation works well with Ubuntu 9.10 and former. The problem arises with 10.04 release. ** Affects: ubuntu Importance: Undecided Status: New ** Tags: 10.04 2p i386 lucid server smart ubuntu -- grub problem with Compaq Smart 2/P Array Controller https://bugs.launchpad.net/bugs/637612 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 563893] Re: Thunderbird will not launch due to a recursive symlink
In my Lucid 10.4, fresh installed from distribution CD, now Thunderbird ver. 3.0.4, installed via Ubuntu apps library, is running well. I was even able to restore my previous Thunderbird records (emails etc.) just removing the initial content of .thunderbird directory and putting there my old Thunderbird profiles.ini file and data folder. -- Thunderbird will not launch due to a recursive symlink https://bugs.launchpad.net/bugs/563893 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 564683] [NEW] Thunderbird 3.0.4 crashed after update x86_32
Public bug reported: Binary package hint: thunderbird - Lucid 10.04 Beta 2 - Intel x86 _32 - Thunderbird 3.0.4 I have my entire, 2 years email content stored in Thunderbird files, which are 3.5 Gb large. The entire system worked well with the first version of Thunderbird which was supplied with Lucid 10.04 Beta 2 first release. After the update of 15 april 2010, the Thunderbirs starts, try to launch and stops. The program window does not open. .thunderbird folder which stores the thunderbird data folder renames to thunderbird.upstream and 2 broken links icons are created in my home folder. When I erase this thunderbird data folder in home (.thunderbird), the program launches well and ask me to create the new, empty accounts, as usual. If I replace the content of this new empty data folder with my old data files, the data folder renames again to thunderbird.upstream and 2 broken links icons are created again in home folder. ** Affects: thunderbird (Ubuntu) Importance: Undecided Status: New -- Thunderbird 3.0.4 crashed after update x86_32 https://bugs.launchpad.net/bugs/564683 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 564683] Re: Thunderbird 3.0.4 crashed after update x86_32
temporary solution: I can rescue my old emails and import them to the Evolution, as berkley mailboxes. It works. -- Thunderbird 3.0.4 crashed after update x86_32 https://bugs.launchpad.net/bugs/564683 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 356282] [NEW] package hotkey-setup 0.1-23ubuntu10 failed to install/upgrade: le sous-processus post-installation script a retourn? une erreur de sortie d'?tat 2
*** This bug is a duplicate of bug 356157 *** https://bugs.launchpad.net/bugs/356157 Public bug reported: Binary package hint: hotkey-setup when updating ProblemType: Package Architecture: i386 DistroRelease: Ubuntu 9.04 ErrorMessage: le sous-processus post-installation script a retourné une erreur de sortie d'état 2 NonfreeKernelModules: nvidia Package: hotkey-setup 0.1-23ubuntu10 SourcePackage: hotkey-setup Title: package hotkey-setup 0.1-23ubuntu10 failed to install/upgrade: le sous-processus post-installation script a retourné une erreur de sortie d'état 2 Uname: Linux 2.6.28-11-generic i686 ** Affects: hotkey-setup (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 -- package hotkey-setup 0.1-23ubuntu10 failed to install/upgrade: le sous-processus post-installation script a retourn? une erreur de sortie d'?tat 2 https://bugs.launchpad.net/bugs/356282 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 356282] Re: package hotkey-setup 0.1-23ubuntu10 failed to install/upgrade: le sous-processus post-installation script a retourn? une erreur de sortie d'?tat 2
*** This bug is a duplicate of bug 356157 *** https://bugs.launchpad.net/bugs/356157 ** Attachment added: Dependencies.txt http://launchpadlibrarian.net/24867721/Dependencies.txt ** Attachment added: DpkgTerminalLog.txt http://launchpadlibrarian.net/24867723/DpkgTerminalLog.txt -- package hotkey-setup 0.1-23ubuntu10 failed to install/upgrade: le sous-processus post-installation script a retourn? une erreur de sortie d'?tat 2 https://bugs.launchpad.net/bugs/356282 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 353317] [NEW] package ubuntu-docs 9.04.6 failed to install/upgrade: le sous-processus post-installation script a retourn? une erreur de sortie d'?tat 2
Public bug reported: Binary package hint: ubuntu-docs updating ProblemType: Package Architecture: i386 DistroRelease: Ubuntu 9.04 ErrorMessage: le sous-processus post-installation script a retourné une erreur de sortie d'état 2 Package: ubuntu-docs 9.04.6 PackageArchitecture: all SourcePackage: ubuntu-docs Title: package ubuntu-docs 9.04.6 failed to install/upgrade: le sous-processus post-installation script a retourné une erreur de sortie d'état 2 Uname: Linux 2.6.28-11-generic i686 ** Affects: ubuntu-docs (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 -- package ubuntu-docs 9.04.6 failed to install/upgrade: le sous-processus post-installation script a retourn? une erreur de sortie d'?tat 2 https://bugs.launchpad.net/bugs/353317 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 353317] Re: package ubuntu-docs 9.04.6 failed to install/upgrade: le sous-processus post-installation script a retourn? une erreur de sortie d'?tat 2
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/24641006/Dependencies.txt ** Attachment added: DpkgTerminalLog.txt http://launchpadlibrarian.net/24641007/DpkgTerminalLog.txt -- package ubuntu-docs 9.04.6 failed to install/upgrade: le sous-processus post-installation script a retourn? une erreur de sortie d'?tat 2 https://bugs.launchpad.net/bugs/353317 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 156901] Re: Gutsy re-install fails on VIA Pentium III chipsets
Found the solution. The reason was the insufficient amount of RAM (256Mb in my case) which, on some platform (various graphc cards etc.) was insufficient to format to run. Inreasing the RAM amount to 512Mb solved the problem. -- Gutsy re-install fails on VIA Pentium III chipsets https://bugs.launchpad.net/bugs/156901 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 156901] Re: Gutsy re-install fails on VIA Pentium III chipsets
Did not try Hardy Heron on such a little amount of RAM - it runs fine with 512Mb. btw, it's the great job, the dreamed one. I totally replaced all Win$ on my several computers. thanks! ** Changed in: linux (Ubuntu) Status: Incomplete = Invalid -- Gutsy re-install fails on VIA Pentium III chipsets https://bugs.launchpad.net/bugs/156901 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 156901] Re: Gutsy re-install fails on VIA Pentium III chipsets
observation: - replacement of hard drive do not solve the problem as well -- Gutsy re-install fails on VIA Pentium III chipsets https://bugs.launchpad.net/bugs/156901 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 156901] Gutsy re-install fails on VIA Pentium III chipsets
Public bug reported: LiveCD Gutsy install process fails when re-installing Gutsy on VIA Pentium III chipset motherboards. 1. tested on 3 computers with Pentium III/1.00GHz, VIA chipsets (type VT82C686), 256Mb RAM, 20Gb Seagate hard disk 2. those computers was running perfectly well under Feisty Fawn 3. when 7.10 version become available, I installed on them Gutsy Gibbon (final, distribution release), used them few days then I decided to re-allocate hard disk space 4. in order to do it, I re-started computer(s) with Gutsy LiveCD and set new device label (hard disk msdos label) on hard disk to totally erase it 5. after reboot, I launched LiveCD install, choosing manual partitionning 6. I set two new partitions (swap and / ) and let's the install proceed 7. after setting the new partitions and formatting them, install stops with error message : (something as) failing to set up the file system on device - Re-launching the LiveCD install do not fix the error. - Re-partition of the hard disk with GParted works, new partitions formats well, but install still fails - Win$XP installs and run well on those machines but re-installing Gutsy still fails - complete hard disk wipe with Seagate SeaTools 2.07PG do not cure the problem as well - automatic partitionning with installs do not solve the problem neither Finally, after 2 days, I found the solution: I installed the Debian (ver 4.0) with my new partition scheme ( one / partition and swap) then I re-launched Gutsy's install from LiveCD, manually assigning only the / partition and checking the format case, without deleting or changing anything other in the partition scheme. This way Gutsy re- installs and further works perfectly well. But the problem remains: it is impossible to re-install Gutsy (not first install -- Gutsy re-install of itself) on the same machine when VIA Pentium III chipset is in use. I tested the Gutsy re-install on another PC with BX chipset. It works without any trouble... So, the problem is somewhere in the install script, apparently failing after formating of the re-installed partition. ** Affects: ubuntu Importance: Undecided Status: New -- Gutsy re-install fails on VIA Pentium III chipsets https://bugs.launchpad.net/bugs/156901 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs