[Bug 1201679] Re: ibus' Super+Space shortcut (usually) doesn't work
ibas icon in upper bar lost also. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1201679 Title: ibus' Super+Space shortcut (usually) doesn't work To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1201679/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 860204] Re: Can't auto config 2 USB serial port
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/860204 Title: Can't auto config 2 USB serial port To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/udev/+bug/860204/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 860204] [NEW] Can't auto config 2 USB serial port
Public bug reported: Plug in 2 USB serial, run "lsusb": ... Bus 004 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device Bus 005 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device ... sudo lsusb -v -s :002: Bus 004 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize064 idVendor 0x10c4 Cygnal Integrated Products, Inc. idProduct 0xea60 CP210x Composite Device bcdDevice1.00 iManufacturer 1 Silicon Labs iProduct2 CP2102 USB to UART Bridge Controller iSerial 3 0044 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 2 CP2102 USB to UART Bridge Controller Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x (Bus Powered) Bus 005 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize064 idVendor 0x10c4 Cygnal Integrated Products, Inc. idProduct 0xea60 CP210x Composite Device bcdDevice1.00 iManufacturer 1 Silicon Labs iProduct2 USB to UART Test version HW1.2 iSerial 3 0045 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 2 USB to UART Test version HW1.2 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x (Bus Powered) BUT ~$ ls -l /dev/|grep -i usb|grep tty crw-rw 1 root dialout 188, 0 2011-09-27 10:39 ttyUSB0 = Just ONE USB tty device was config. If plug in/out few times, sometime there are not any USB tty device was config( in fact 2 USB serial cable was connected to PC) ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: udev 173-0ubuntu3 ProcVersionSignature: Ubuntu 3.0.0-12.19-generic 3.0.4 Uname: Linux 3.0.0-12-generic i686 ApportVersion: 1.23-0ubuntu1 Architecture: i386 CheckboxSubmission: bb3c63e4987943d4caf
[Bug 411288] Re: desktop-switcher crashed with SIGSEGV in gdk_window_enable_synchronized_configure()
** Changed in: desktop-switcher Status: Incomplete => Fix Released ** Changed in: desktop-switcher (Ubuntu) Status: Triaged => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/411288 Title: desktop-switcher crashed with SIGSEGV in gdk_window_enable_synchronized_configure() To manage notifications about this bug go to: https://bugs.launchpad.net/desktop-switcher/+bug/411288/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 802555] Re: run "apt-get upgrade" make kernel WARNING
** Changed in: linux (Ubuntu) Status: Incomplete => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/802555 Title: run "apt-get upgrade" make kernel WARNING To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/802555/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 625301] Re: gcompris crashed with SIGSEGV in gc_board_get_current()
** Changed in: gcompris (Ubuntu) Status: Triaged => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/625301 Title: gcompris crashed with SIGSEGV in gc_board_get_current() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gcompris/+bug/625301/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 802555] Re: run "apt-get upgrade" make kernel WARNING
** Attachment added: "inode.log" https://bugs.launchpad.net/bugs/802555/+attachment/2182667/+files/inode.log -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/802555 Title: run "apt-get upgrade" make kernel WARNING To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/802555/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 802555] [NEW] run "apt-get upgrade" make kernel WARNING
Public bug reported: run "apt-get upgrade" when updating system, always switch to console, and print some info like this: [ 865.903422] [ cut here ] [ 865.903436] WARNING: at /build/buildd/linux-3.0/fs/fs-writeback.c:357 writeback_single_inode+0x8b/0x200() [ 865.903439] Hardware name: [ 865.903441] Modules linked in: btrfs zlib_deflate libcrc32c ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs reiserfs xt_TCPMSS xt_tcpmss xt_tcpudp iptable_mangle ip_tables x_tables pppoe pppox binfmt_misc appletalk snd_hda_codec_realtek ipx p8023 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi nouveau snd_rawmidi snd_seq_midi_event snd_seq ttm drm_kms_helper drm snd_timer snd_seq_device i2c_algo_bit mxm_wmi snd psmouse serio_raw soundcore snd_page_alloc video ppdev parport_pc k8temp i2c_nforce2 lp parport 8139too 8139cp sata_nv pata_amd floppy [ 865.903534] Pid: 308, comm: flush-8:0 Tainted: G D 3.0-1-generic #2-Ubuntu [ 865.903537] Call Trace: [ 865.903544] [] ? printk+0x2d/0x2f [ 865.903550] [] warn_slowpath_common+0x72/0xa0 [ 865.903554] [] ? writeback_single_inode+0x8b/0x200 [ 865.903558] [] ? writeback_single_inode+0x8b/0x200 [ 865.903562] [] warn_slowpath_null+0x22/0x30 [ 865.903566] [] writeback_single_inode+0x8b/0x200 [ 865.903570] [] writeback_sb_inodes+0xa5/0x160 [ 865.903574] [] writeback_inodes_wb+0x81/0xc0 [ 865.903578] [] wb_writeback+0x256/0x310 [ 865.903582] [] ? schedule+0x2f1/0x680 [ 865.903587] [] ? get_nr_dirty_inodes+0xd/0x20 [ 865.903591] [] wb_check_old_data_flush+0x7d/0x90 [ 865.903595] [] wb_do_writeback+0x100/0x180 [ 865.903599] [] ? usleep_range+0x40/0x40 [ 865.903603] [] bdi_writeback_thread+0x75/0x240 [ 865.903607] [] ? wb_do_writeback+0x180/0x180 [ 865.903611] [] kthread+0x6d/0x80 [ 865.903615] [] ? flush_kthread_worker+0x80/0x80 [ 865.903620] [] kernel_thread_helper+0x6/0x10 [ 865.903623] ---[ end trace 10f62df5015388ca ]--- [ 1385.644590] [ cut here ] ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: linux-image (not installed) ProcVersionSignature: Ubuntu 3.0-1.2-generic 3.0.0-rc3 Uname: Linux 3.0-1-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. AplayDevices: List of PLAYBACK Hardware Devices card 0: NVidia [HDA NVidia], device 0: ALC861-VD Analog [ALC861-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: NVidia [HDA NVidia], device 0: ALC861-VD Analog [ALC861-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: glr2017 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'NVidia'/'HDA NVidia at 0xfe028000 irq 23' Mixer name : 'Realtek ALC861-VD' Components : 'HDA:10ec0862,,0011' Controls : 21 Simple ctrls : 13 Date: Mon Jun 27 22:08:43 2011 HibernationDevice: RESUME=UUID=3e8fcb1b-2f24-47f8-84ff-039da5883065 InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Alpha i386 (20091209.1) IwConfig: lono wireless extensions. eth0 no wireless extensions. ppp0 no wireless extensions. Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub ProcEnviron: LANGUAGE=en_US:en LANG=zh_CN.utf8 LC_MESSAGES=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0-1-generic root=UUID=5390d86c-ede5-4f81-9651-1de887911f02 ro RelatedPackageVersions: linux-restricted-modules-3.0-1-generic N/A linux-backports-modules-3.0-1-generic N/A linux-firmware 1.55 RfKill: SourcePackage: linux UpgradeStatus: Upgraded to oneiric on 2011-06-10 (17 days ago) dmi.bios.date: 01/29/2007 dmi.bios.vendor: Phoenix Technologies, LTD dmi.bios.version: 6.00 PG dmi.board.name: N61S dmi.board.vendor: Onda Technology Corporation. dmi.board.version: Ver1.00 dmi.chassis.type: 3 dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd01/29/2007:svn:pn:pvr:rvnOndaTechnologyCorporation.:rnN61S:rvrVer1.00:cvn:ct3:cvr: ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: apport-bug i386 oneiric unity-2d -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/802555 Title: run "apt-get upgrade" make kernel WARNING To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/802555/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720446] Re: possible memory leak in compiz when using places, dashboard
forgive me, wrong place. this is about another bug -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720446 Title: possible memory leak in compiz when using places, dashboard -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 725434] Re: Nvidia drivers lead to extra memory usage for each process using libGL
http://wayland.freedesktop.org/building.html : " cairo-gl The Wayland clients can render using cairo-gl, but fall back to software when cairo-gl is not available. " So cairo (1.10.2-2ubuntu2) may didn't break wayland, I guess -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/725434 Title: Nvidia drivers lead to extra memory usage for each process using libGL -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720446] Re: possible memory leak in compiz when using places, dashboard
http://wayland.freedesktop.org/building.html : " cairo-gl The Wayland clients can render using cairo-gl, but fall back to software when cairo-gl is not available. " So cairo (1.10.2-2ubuntu2) may didn't break wayland, I guess -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720446 Title: possible memory leak in compiz when using places, dashboard -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720446] Re: possible memory leak in compiz when using places, dashboard
http://wayland.freedesktop.org/building.html : " cairo-gl The Wayland clients can render using cairo-gl, but fall back to software when cairo-gl is not available. " So cairo (1.10.2-2ubuntu2) may didn't broken wayland, I guest. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720446 Title: possible memory leak in compiz when using places, dashboard -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 729547] Re: pkg-config --libs-only-L output nothing at Natty
** Changed in: pkg-config (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/729547 Title: pkg-config --libs-only-L output nothing at Natty -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 729547] [NEW] pkg-config --libs-only-L output nothing at Natty
Public bug reported: Binary package hint: pkg-config pkg-config --libs can't get lib directory == $pkg-configĀ --libs-only-L glib-2.0 $pkg-config --libs glib-2.0 -lglib-2.0 $ dpkg -L libglib2.0-dev ... /usr/lib/pkgconfig/glib-2.0.pc ... /usr/lib/libglib-2.0.so ... /usr/lib/libglib-2.0.a ... $ cat /usr/lib/pkgconfig/glib-2.0.pc prefix=/usr exec_prefix=${prefix} libdir=${exec_prefix}/lib includedir=${prefix}/include glib_genmarshal=glib-genmarshal gobject_query=gobject-query glib_mkenums=glib-mkenums Name: GLib Description: C Utility Library Version: 2.28.1 Libs: -L${libdir} -lglib-2.0 Libs.private: Cflags: -I${includedir}/glib-2.0 -I${libdir}/glib-2.0/include = But why --libs did not output any info about -L${libdir} ? ** Affects: pkg-config (Ubuntu) Importance: Undecided Status: Invalid ** Tags: natty ** Tags added: natty ** Description changed: Binary package hint: pkg-config pkg-config --libs can't get lib directory - --libs-only-L glib-2.0 - + + == + $pkg-configĀ --libs-only-L glib-2.0 + $pkg-config --libs glib-2.0 -lglib-2.0 $ dpkg -L libglib2.0-dev ... /usr/lib/pkgconfig/glib-2.0.pc + ... /usr/lib/libglib-2.0.so - libglib-2.0.a/usr/lib/ ... - $ cat /usr/lib/pkgconfig/glib-2.0.pc + /usr/lib/libglib-2.0.a + ... + $ cat /usr/lib/pkgconfig/glib-2.0.pc prefix=/usr exec_prefix=${prefix} libdir=${exec_prefix}/lib includedir=${prefix}/include glib_genmarshal=glib-genmarshal gobject_query=gobject-query glib_mkenums=glib-mkenums Name: GLib Description: C Utility Library Version: 2.28.1 - Libs: -L${libdir} -lglib-2.0 - Libs.private: - Cflags: -I${includedir}/glib-2.0 -I${libdir}/glib-2.0/include - + Libs: -L${libdir} -lglib-2.0 + Libs.private: + Cflags: -I${includedir}/glib-2.0 -I${libdir}/glib-2.0/include = But why --libs did not output any info about -L${libdir} ? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/729547 Title: pkg-config --libs-only-L output nothing at Natty -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 655790] Re: [ubuntu 10.10 rc] nouveau set wrong resolution
** Changed in: xserver-xorg-video-nouveau (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/655790 Title: [ubuntu 10.10 rc] nouveau set wrong resolution -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 693573] Re: evolution-mapi cannot be installed on 11.04
** Changed in: evolution-mapi (Ubuntu) Assignee: (unassigned) => ccaaatt (ccaaatt) ** Changed in: evolution-mapi (Ubuntu) Assignee: ccaaatt (ccaaatt) => (unassigned) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/693573 Title: evolution-mapi cannot be installed on 11.04 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 703779] [NEW] python-qt4 should not depend on python 2.6 at Natty
Public bug reported: Binary package hint: python-qt4 At Natty (11.04) alpha, laptop:~$ apt-cache depends python-qt4 python-qt4 Depends: libc6 Depends: libgcc1 Depends: libpython2.6 ... Depends: python ... BUT laptop:~$ dpkg -L python-qt4 ... /usr/lib/pyshared/python2.7 /usr/lib/pyshared/python2.7/PyQt4 /usr/lib/pyshared/python2.7/PyQt4/QtCore.so /usr/lib/pyshared/python2.7/PyQt4/QtGui.so ... /usr/lib/pyshared/python2.7/PyQt4/Qt.so /usr/lib/pyshared/python2.7/PyQt4/QtTest.so /usr/lib/pyshared/python2.6 /usr/lib/pyshared/python2.6/PyQt4 /usr/lib/pyshared/python2.6/PyQt4/QtCore.so /usr/lib/pyshared/python2.6/PyQt4/QtGui.so /usr/lib/pyshared/python2.6/PyQt4/QtScript.so ... /usr/lib/pyshared/python2.6/PyQt4/Qt.so /usr/lib/pyshared/python2.6/PyQt4/QtTest.so So, at natty, python-qt4 should depend libpython2.7 or libpython2.6. In fact, the default python is 2.7 for natty, so depends on libpython2.6 may have some other problems. ** Affects: python-qt4 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/703779 Title: python-qt4 should not depend on python 2.6 at Natty -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 695760] Re: yelp does not start on natty
Today after updating to new version, yelp can work now, and I can remove xulrunner 1.9.2 at last. OK ** Changed in: yelp (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/695760 Title: yelp does not start on natty -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 695760] Re: yelp does not start on natty
yelp depends xulrunner 1.9.2 but natty firefox 4 uses xulrunner2.0 default -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/695760 Title: yelp does not start on natty -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 692822] Re: Eric fails to start: No module named QtHelp
At natty, python, 2.6 or 2.7, it's a problem -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/692822 Title: Eric fails to start: No module named QtHelp -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 655790] Re: [ubuntu 10.10 rc] nouveau set wrong resolution
11.04 alpha is OK -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/655790 Title: [ubuntu 10.10 rc] nouveau set wrong resolution -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 692822] Re: Eric fails to start: No module named QtHelp
At natty, there are /usr/share/sip/PyQt4/QtHelp/*.sip BUT "ls /usr/lib/pyshared/python2.6/PyQt4/QtHelp.so"? No such file or directory! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/692822 Title: Eric fails to start: No module named QtHelp -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 625301] Re: gcompris crashed with SIGSEGV in gc_board_get_current()
I delete iBus, install fcitx. now gcompris OK. -- gcompris crashed with SIGSEGV in gc_board_get_current() https://bugs.launchpad.net/bugs/625301 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 656888] Re: gcompris crashed with SIGSEGV in gc_board_get_current_board_plugin()
*** This bug is a duplicate of bug 625301 *** https://bugs.launchpad.net/bugs/625301 I delete iBus, install fcitx. now gcompris OK. -- gcompris crashed with SIGSEGV in gc_board_get_current_board_plugin() https://bugs.launchpad.net/bugs/656888 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 625301] Re: gcompris crashed with SIGSEGV in gc_board_get_current()
Bug #656888, and Bug #647876, this areIBUS-CRITICAL **: in XsessionErrors.txt Oops,iBus -- gcompris crashed with SIGSEGV in gc_board_get_current() https://bugs.launchpad.net/bugs/625301 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 625301] Re: gcompris crashed with SIGSEGV in gc_board_get_current()
Bug #656888, this is nouveau driver, Bug #647876, this is nvidia driver -- gcompris crashed with SIGSEGV in gc_board_get_current() https://bugs.launchpad.net/bugs/625301 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 656888] Re: gcompris crashed with SIGSEGV in gc_board_get_current_board_plugin()
** Attachment added: "CoreDump.gz" https://bugs.launchpad.net/bugs/656888/+attachment/1678885/+files/CoreDump.gz ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/656888/+attachment/1678886/+files/Dependencies.txt ** Attachment added: "Disassembly.txt" https://bugs.launchpad.net/bugs/656888/+attachment/1678887/+files/Disassembly.txt ** Attachment added: "ProcMaps.txt" https://bugs.launchpad.net/bugs/656888/+attachment/167/+files/ProcMaps.txt ** Attachment added: "ProcStatus.txt" https://bugs.launchpad.net/bugs/656888/+attachment/1678889/+files/ProcStatus.txt ** Attachment added: "Registers.txt" https://bugs.launchpad.net/bugs/656888/+attachment/1678890/+files/Registers.txt ** Attachment added: "Stacktrace.txt" https://bugs.launchpad.net/bugs/656888/+attachment/1678891/+files/Stacktrace.txt ** Attachment added: "ThreadStacktrace.txt" https://bugs.launchpad.net/bugs/656888/+attachment/1678892/+files/ThreadStacktrace.txt ** Attachment added: "XsessionErrors.txt" https://bugs.launchpad.net/bugs/656888/+attachment/1678893/+files/XsessionErrors.txt ** Visibility changed to: Public -- gcompris crashed with SIGSEGV in gc_board_get_current_board_plugin() https://bugs.launchpad.net/bugs/656888 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 655790] Re: [ubuntu 10.10 rc] nouveau set wrong resolution
I can force the setting by type: xrandr --newmode "1440x900" 106.50 1440 1528 1672 1904 900 903 909 934 -Hsync +Vsync xrandr --addmode VGA-1 1440x900 xrandr --output VGA-1 --mode 1440x900 but gdm reset it to 1024x768, except I write is into gdm initial script -- [ubuntu 10.10 rc] nouveau set wrong resolution https://bugs.launchpad.net/bugs/655790 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 655790] Re: [ubuntu 10.10 rc] nouveau set wrong resolution
I can force the setting by type: xrandr --newmode "1440x900" 106.50 1440 1528 1672 1904 900 903 909 934 -Hsync +Vsync xrandr --addmode VGA-1 1440x900 xrandr --output VGA-1 --mode 1440x900 but gdm reset it to 10248768, except I write is into gdm initial script -- [ubuntu 10.10 rc] nouveau set wrong resolution https://bugs.launchpad.net/bugs/655790 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 655790] [NEW] [ubuntu 10.10 rc] nouveau set wrong resolution
Public bug reported: Binary package hint: xserver-xorg-video-nouveau my monitor is 1440x900, but at 10.10RC, I got 1024x768 $lspci -v 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) Subsystem: nVidia Corporation Device cb84 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) Subsystem: nVidia Corporation Device cb84 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) Subsystem: nVidia Corporation Device cb84 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) Subsystem: nVidia Corporation Device cb84 Flags: 66MHz, fast devsel 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: nVidia Corporation Device cb84 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: Kernel driver in use: ohci_hcd 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: nVidia Corporation Device cb84 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci_hcd 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: c000-cfff Memory behind bridge: fd80-fd8f Prefetchable memory behind bridge: fdf0-fdff Capabilities: 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) Subsystem: nVidia Corporation MCP61 High Definition Audio Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe028000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: nVidia Corporation Device cb84 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 01f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 03f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 0170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 0370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: Kernel driver in use: pata_amd Kernel modules: pata_amd 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: nVidia Corporation Device cb84 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: Kernel driver in use: sata_nv Kernel modules: sata_nv 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: b000-bfff Memory behind bridge: fde0-fdef Prefetchable memory behind bridge: fdd0-fddf Capabilities: Kernel driver in use: pcieport Kernel modules: shpchp 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: a000-afff Memory behind bridge: fdc0-fdcf Prefetchable memory behind bridge: fdb0-fdbf Capabilities: Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 9000-9fff Memory behind bridge: fda0-fdaf Prefetchable memory behind bridge: fd90-fd9f Capabilities: Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6100 nForce 405] (rev a2) (prog-if 00 [VGA controller]) Subsystem: nVidia Corporation Device cb84 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fb00 (32-bit, non-prefetchable) [size=16M] Memory at e000 (64-bit, prefetchable) [size=256M] Memory at fc00 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 8000 [disabled] [size=128K] Capabilities: Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 00:1
[Bug 650886] Re: evolution2.30+mapi crash, after install krb5
ubuntu 10.10 beta evolution 2.30.3-1ubuntu5 , mapi 0.30.3-1ubuntu1 -- evolution2.30+mapi crash, after install krb5 https://bugs.launchpad.net/bugs/650886 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 650886] [NEW] evolution2.30+mapi crash, after install krb5
Public bug reported: Binary package hint: evolution after install krb5-config and krb5-user, evolution+mapi alway crash,.but if start it with offlione mode, it can start, but if try connent to exchange, crash at once. so I remove all account at offline mode, and try new a MAPI acount, after input all account info and try to connect to server to auth, I got this log: (evolution:6307): libexchangemapi-DEBUG: Create profile with xxx.xxx .xx.net (evolution:6307): libexchangemapi-DEBUG: exchange-mapi-connection.c:3301: exchange_mapi_create_profile: lock(connect_lock) (evolution:6307): libexchangemapi-DEBUG: exchange-mapi-connection.c:87: ensure_mapi_init_called: lock(connect_lock) (evolution:6307): libexchangemapi-DEBUG: exchange-mapi-connection.c:89: ensure_mapi_init_called: unlock(connect_lock) (evolution:6307): libexchangemapi-DEBUG: Logging into the server... ==6307== Invalid read of size 4 ==6307== at 0xFEFA7DA: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFA8F8: _krb5_config_vget_next (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFA9DF: _krb5_config_vget (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFAACB: krb5_config_vget_string (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFADC0: krb5_config_vget_bool_default (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFAE92: krb5_config_get_bool_default (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFF110C7: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFF11159: krb5_get_init_creds_opt_set_default_flags (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE61555: kerberos_kinit_password_cc (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE6A707: kinit_to_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE69189: cli_credentials_get_named_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE6923E: cli_credentials_get_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307== Address 0x78c888c is 3 bytes after a block of size 1 alloc'd ==6307== at 0x4025BD3: malloc (vg_replace_malloc.c:236) ==6307== by 0x51E146F: strdup (strdup.c:43) ==6307== by 0x54A4D51: krb5_set_default_realm (in /usr/lib/libkrb5.so.3.3) ==6307== by 0xFE64E6F: smb_krb5_init_context_basic (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE64F9F: smb_krb5_init_context (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE688A4: cli_credentials_get_krb5_context (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE68E60: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE69141: cli_credentials_get_named_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE6923E: cli_credentials_get_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE69481: cli_credentials_get_client_gss_creds (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE6CA88: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEADEEB: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307== ==6307== Invalid read of size 1 ==6307== at 0x40271F0: strcmp (mc_replace_strmem.c:426) ==6307== by 0xFEFA7EB: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFA8F8: _krb5_config_vget_next (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFA9DF: _krb5_config_vget (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFAACB: krb5_config_vget_string (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFADC0: krb5_config_vget_bool_default (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFAE92: krb5_config_get_bool_default (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFF110C7: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFF11159: krb5_get_init_creds_opt_set_default_flags (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE61555: kerberos_kinit_password_cc (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE6A707: kinit_to_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE69189: cli_credentials_get_named_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307== Address 0x0 is not stack'd, malloc'd or (recently) free'd ==6307== ==6307== ==6307== Process terminating with default action of signal 11 (SIGSEGV) ==6307== Access not within mapped region at address 0x0 ==6307== at 0x40271F0: strcmp (mc_replace_strmem.c:426) ==6307== by 0xFEFA7EB: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFA8F8: _krb5_config_vget_next (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFA9DF: _krb5_config_vget (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFAACB: krb5_config_vget_string (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFADC0: krb5_config_vget_bool_default (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFEFAE92: krb5_config_get_bool_default (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFF110C7: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFF11159: krb5_get_init_creds_opt_set_default_flags (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE61555: kerberos_kinit_password_cc (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE6A707: kinit_to_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307== by 0xFE69189: cli_credentials_get_named_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307== If you believe this happened as a result of a stack ==630
[Bug 612960] Re: "subscribe to other user's folder" has no effect whatsoever
*** This bug is a duplicate of bug 38429 *** https://bugs.launchpad.net/bugs/38429 (evolution:6307): libexchangemapi-DEBUG: Create profile with xxx.xxx .xx.net (evolution:6307): libexchangemapi-DEBUG: exchange-mapi-connection.c:3301: exchange_mapi_create_profile: lock(connect_lock) (evolution:6307): libexchangemapi-DEBUG: exchange-mapi-connection.c:87: ensure_mapi_init_called: lock(connect_lock) (evolution:6307): libexchangemapi-DEBUG: exchange-mapi-connection.c:89: ensure_mapi_init_called: unlock(connect_lock) (evolution:6307): libexchangemapi-DEBUG: Logging into the server... ==6307== Invalid read of size 4 ==6307==at 0xFEFA7DA: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFA8F8: _krb5_config_vget_next (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFA9DF: _krb5_config_vget (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFAACB: krb5_config_vget_string (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFADC0: krb5_config_vget_bool_default (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFAE92: krb5_config_get_bool_default (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFF110C7: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFF11159: krb5_get_init_creds_opt_set_default_flags (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE61555: kerberos_kinit_password_cc (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE6A707: kinit_to_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE69189: cli_credentials_get_named_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE6923E: cli_credentials_get_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307== Address 0x78c888c is 3 bytes after a block of size 1 alloc'd ==6307==at 0x4025BD3: malloc (vg_replace_malloc.c:236) ==6307==by 0x51E146F: strdup (strdup.c:43) ==6307==by 0x54A4D51: krb5_set_default_realm (in /usr/lib/libkrb5.so.3.3) ==6307==by 0xFE64E6F: smb_krb5_init_context_basic (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE64F9F: smb_krb5_init_context (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE688A4: cli_credentials_get_krb5_context (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE68E60: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE69141: cli_credentials_get_named_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE6923E: cli_credentials_get_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE69481: cli_credentials_get_client_gss_creds (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE6CA88: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEADEEB: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307== ==6307== Invalid read of size 1 ==6307==at 0x40271F0: strcmp (mc_replace_strmem.c:426) ==6307==by 0xFEFA7EB: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFA8F8: _krb5_config_vget_next (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFA9DF: _krb5_config_vget (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFAACB: krb5_config_vget_string (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFADC0: krb5_config_vget_bool_default (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFAE92: krb5_config_get_bool_default (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFF110C7: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFF11159: krb5_get_init_creds_opt_set_default_flags (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE61555: kerberos_kinit_password_cc (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE6A707: kinit_to_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE69189: cli_credentials_get_named_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307== Address 0x0 is not stack'd, malloc'd or (recently) free'd ==6307== ==6307== ==6307== Process terminating with default action of signal 11 (SIGSEGV) ==6307== Access not within mapped region at address 0x0 ==6307==at 0x40271F0: strcmp (mc_replace_strmem.c:426) ==6307==by 0xFEFA7EB: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFA8F8: _krb5_config_vget_next (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFA9DF: _krb5_config_vget (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFAACB: krb5_config_vget_string (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFADC0: krb5_config_vget_bool_default (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFEFAE92: krb5_config_get_bool_default (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFF110C7: ??? (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFF11159: krb5_get_init_creds_opt_set_default_flags (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE61555: kerberos_kinit_password_cc (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE6A707: kinit_to_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307==by 0xFE69189: cli_credentials_get_named_ccache (in /usr/lib/libgensec.so.0.0.1) ==6307== If you believe this happened as a result of a stack ==6307== overflow in your program's main thread (unlikely but ==6307== possible), you can try to increase the size of the ==6307==
[Bug 648516] [NEW] when reqister gwget.schemas, get promts "You must have at least one entry in a "
Public bug reported: ls -l /usr/share/gconf/schemas/gwget.schemas -rw-r--r-- 1 root root 10214 2010-08-21 17:28 /usr/share/gconf/schemas/gwget.schemas sudo gconf-schemas --register gwget.schemas You must have at least one entry in a You must have at least one entry in a You must have at least one entry in a You must have at least one entry in a You must have at least one entry in a ** Affects: gwget2 (Ubuntu) Importance: Undecided Status: New -- when reqister gwget.schemas, get promts "You must have at least one entry in a " https://bugs.launchpad.net/bugs/648516 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 627235] Re: eric4.py crashed with SIGSEGV in g_hash_table_lookup()
seem OK now ** Changed in: eric (Ubuntu) Status: New => Fix Released -- eric4.py crashed with SIGSEGV in g_hash_table_lookup() https://bugs.launchpad.net/bugs/627235 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 627850] Re: Eclipse SIGSEGV crash
after update, seem ok ** Changed in: openjdk-6 (Ubuntu) Status: New => Fix Released -- Eclipse SIGSEGV crash https://bugs.launchpad.net/bugs/627850 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 627850] Re: Eclipse SIGSEGV crash
** Attachment added: "hs_err_pid11439.log" https://bugs.launchpad.net/bugs/627850/+attachment/1533513/+files/hs_err_pid11439.log -- Eclipse SIGSEGV crash https://bugs.launchpad.net/bugs/627850 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 627850] [NEW] Eclipse SIGSEGV crash
Public bug reported: Ubunto 10.10 alpha3 after start eclipse, crash soon # # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x096480c9, pid=11439, tid=3078756032 # # JRE version: 6.0_20-b20 # Java VM: OpenJDK Client VM (17.0-b16 mixed mode, sharing linux-x86 ) # Derivative: IcedTea6 1.9pre # Distribution: Ubuntu maverick (development branch), package 6b20~pre2-0ubuntu2 # Problematic frame: # C 0x096480c9 ** Affects: openjdk-6 (Ubuntu) Importance: Undecided Status: New -- Eclipse SIGSEGV crash https://bugs.launchpad.net/bugs/627850 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 627235] Re: eric4.py crashed with SIGSEGV in g_hash_table_lookup()
Oh, after switch language, Eric seem Ok, but eclipse crash often. -- eric4.py crashed with SIGSEGV in g_hash_table_lookup() https://bugs.launchpad.net/bugs/627235 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 627235] Re: eric4.py crashed with SIGSEGV in g_hash_table_lookup()
My eclipse 3.5 crash also when I click menu. When I switch to English language setting, seem OK.(Menu System->Administration-Language support, and drag English to first place, re-login).Both Erich editor and Eclipse. So, my this is because of chinese language setting?? -- eric4.py crashed with SIGSEGV in g_hash_table_lookup() https://bugs.launchpad.net/bugs/627235 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 627235] Re: eric4.py crashed with SIGSEGV in g_hash_table_lookup()
** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/627235/+attachment/1531224/+files/Dependencies.txt ** Attachment added: "Disassembly.txt" https://bugs.launchpad.net/bugs/627235/+attachment/1531225/+files/Disassembly.txt ** Attachment added: "ProcMaps.txt" https://bugs.launchpad.net/bugs/627235/+attachment/1531226/+files/ProcMaps.txt ** Attachment added: "ProcStatus.txt" https://bugs.launchpad.net/bugs/627235/+attachment/1531227/+files/ProcStatus.txt ** Attachment added: "Registers.txt" https://bugs.launchpad.net/bugs/627235/+attachment/1531228/+files/Registers.txt ** Attachment added: "SegvAnalysis.txt" https://bugs.launchpad.net/bugs/627235/+attachment/1531229/+files/SegvAnalysis.txt ** Attachment added: "Stacktrace.txt" https://bugs.launchpad.net/bugs/627235/+attachment/1531230/+files/Stacktrace.txt ** Attachment added: "ThreadStacktrace.txt" https://bugs.launchpad.net/bugs/627235/+attachment/1531231/+files/ThreadStacktrace.txt -- eric4.py crashed with SIGSEGV in g_hash_table_lookup() https://bugs.launchpad.net/bugs/627235 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 627235] [NEW] eric4.py crashed with SIGSEGV in g_hash_table_lookup()
Public bug reported: Binary package hint: eric When I try to click menuitem "open a ...", Eric crshed. And always crash. ProblemType: Crash DistroRelease: Ubuntu 10.10 Package: eric 4.4.4a-1 ProcVersionSignature: Ubuntu 2.6.35-19.26-generic 2.6.35.3 Uname: Linux 2.6.35-19-generic i686 Architecture: i386 CheckboxSubmission: bb3c63e4987943d4cafafd94eb0f35b5 CheckboxSystem: bb422ca46d02494cdbc459927a98bc2f CrashCounter: 1 Date: Tue Aug 31 13:16:21 2010 ExecutablePath: /usr/share/eric/modules/eric4.py InterpreterPath: /usr/bin/python2.6 PackageArchitecture: all ProcCmdline: /usr/bin/python /usr/share/eric/modules/eric4.py ProcEnviron: LANGUAGE=zh_CN:zh:en PATH=(custom, user) LANG=zh_CN.utf8 SHELL=/bin/bash Signal: 11 SourcePackage: eric StacktraceTop: g_hash_table_lookup () from /lib/libglib-2.0.so.0 ?? () from /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so ?? () from /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so ubuntu_menu_proxy_insert () gtk_menu_shell_insert () from /usr/lib/libgtk-x11-2.0.so.0 Title: eric4.py crashed with SIGSEGV in g_hash_table_lookup() UserGroups: adm admin cdrom dialout dip lpadmin netdev plugdev sambashare ** Affects: eric (Ubuntu) Importance: Undecided Status: New ** Tags: apport-crash i386 maverick ubuntu-une -- eric4.py crashed with SIGSEGV in g_hash_table_lookup() https://bugs.launchpad.net/bugs/627235 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 487903] Re: Compilation with check not possible (infinite loop)
sorry, 10.04 -- Compilation with check not possible (infinite loop) https://bugs.launchpad.net/bugs/487903 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs