[Bug 2066218] Re: 0a5c: 58xx USB device doesn't receive suspend interrupt from USBD Linux Driver/controller
adminuser@adminuser-Latitude-7350:~$ sudo cat /sys/bus/usb/devices/3-10/power/control auto adminuser@adminuser-Latitude-7350:~$ lsusb | grep Broadcom Bus 003 Device 004: ID 0a5c:5864 Broadcom Corp. 58200 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2066218 Title: 0a5c: 58xx USB device doesn't receive suspend interrupt from USBD Linux Driver/controller To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/2066218/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2066218] Re: 0a5c: 58xx USB device doesn't receive suspend interrupt from USBD Linux Driver/controller
Bus 003 Device 004: ID 0a5c:5864 Broadcom Corp. 58200 Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize064 idVendor 0x0a5c Broadcom Corp. idProduct 0x5864 bcdDevice1.01 iManufacturer 1 Broadcom Corp iProduct2 58200 iSerial 3 0123456789ABCD bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x008b bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 254 Application Specific Interface bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 4 Broadcom ControlVault 3+ ** UNRECOGNIZED: 10 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber1 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass11 Chip/SmartCard bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 5 Contacted SmartCard ChipCard Interface Descriptor: bLength54 bDescriptorType33 bcdCCID 1.00 nMaxSlotIndex 0 bVoltageSupport 7 5.0V 3.0V 1.8V dwProtocols 3 T=0 T=1 dwDefaultClock 4000 dwMaxiumumClock 4000 bNumClockSupported 0 dwDataRate 9600 bps dwMaxDataRate 25 bps bNumDataRatesSupp. 0 dwMaxIFSD 247 dwSyncProtocols dwMechanical dwFeatures 000102BA Auto configuration based on ATR Auto voltage selection Auto clock change Auto baud rate change Auto PPS made by CCID NAD value other than 0x00 accepted TPDU level exchange dwMaxCCIDMsgLen 271 bClassGetResponse 00 bClassEnvelope 00 wlcdLayout none bPINSupport 0 bMaxCCIDBusySlots 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Device Qualifier (for other device speed): bLength
[Bug 2066218] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/2066218/+attachment/5780554/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2066218 Title: 0a5c: 58xx USB device doesn't receive suspend interrupt from USBD Linux Driver/controller To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/2066218/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2066218] Re: 0a5c: 58xx USB device doesn't receive suspend interrupt from USBD Linux Driver/controller
Kindly move the defect to Intel USB controller Linux driver package to address it, i couldn't assign it to right package. ** Tags added: apport-collected jammy ** Description changed: 0a5c: 58xx USB device doesn't receive suspend interrupt from Intel USBD Linux Driver/controller by default when no user space fingerprint drivers are installed for this device. Where as similar situation at windows, Windows USB controller sends suspend interrupt to device. + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu82.5 + Architecture: amd64 + CasperMD5CheckResult: pass + CurrentDesktop: ubuntu:GNOME + DistributionChannelDescriptor: + # This is the distribution channel descriptor for the OEM CDs + # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor + canonical-oem-somerville-jammy-amd64-20220504-33+jellyfish-oddish+X118 + DistroRelease: Ubuntu 22.04 + InstallationDate: Installed on 2024-03-20 (61 days ago) + InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - somerville-jammy-amd64-20220504-33 + Package: gnome-control-center (not installed) + ProcEnviron: + LANGUAGE=en_IN:en + TERM=xterm-256color + PATH=(custom, no user) + LANG=en_IN + SHELL=/bin/bash + ProcVersionSignature: Ubuntu 6.5.0-1023.24-oem 6.5.13 + Tags: jammy + Uname: Linux 6.5.0-1023-oem x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: N/A + _MarkForUpload: True -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2066218 Title: 0a5c: 58xx USB device doesn't receive suspend interrupt from USBD Linux Driver/controller To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/2066218/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2066218] [NEW] 0a5c: 58xx USB device doesn't receive suspend interrupt from USBD Linux Driver/controller
Public bug reported: 0a5c: 58xx USB device doesn't receive suspend interrupt from Intel USBD Linux Driver/controller by default when no user space fingerprint drivers are installed for this device. Where as similar situation at windows, Windows USB controller sends suspend interrupt to device. ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2066218 Title: 0a5c: 58xx USB device doesn't receive suspend interrupt from USBD Linux Driver/controller To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/2066218/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2060428] [NEW] package linux-tools-common 5.15.0-101.111 failed to install/upgrade: trying to overwrite '/usr/bin/acpidbg', which is also in package linux-intel-iotg-tools-common 5.15.0-1051.57
Public bug reported: Unpacking linux-modules-nvidia-535-generic-hwe-22.04 (6.5.0-27.28~22.04.1) over (6.5.0-26.26~22.04.1+1) ... Preparing to unpack .../21-linux-tools-common_5.15.0-102.112_all.deb ... Unpacking linux-tools-common (5.15.0-102.112) over (5.15.0-101.111) ... dpkg: error processing archive /tmp/apt-dpkg-install-KxZylP/21-linux-tools-commo n_5.15.0-102.112_all.deb (--unpack): trying to overwrite '/usr/bin/acpidbg', which is also in package linux-intel-io tg-tools-common 5.15.0-1051.57 dpkg-deb: error: paste subprocess was killed by signal (Broken pipe) Errors were encountered while processing: /tmp/apt-dpkg-install-KxZylP/21-linux-tools-common_5.15.0-102.112_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) ProblemType: Package DistroRelease: Ubuntu 22.04 Package: linux-tools-common 5.15.0-101.111 ProcVersionSignature: Ubuntu 6.5.0-26.26~22.04.1-generic 6.5.13 Uname: Linux 6.5.0-26-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: boul-iisc 2346 F pulseaudio CRDA: N/A CasperMD5CheckResult: pass Date: Mon Apr 8 11:24:23 2024 ErrorMessage: trying to overwrite '/usr/bin/acpidbg', which is also in package linux-intel-iotg-tools-common 5.15.0-1051.57 InstallationDate: Installed on 2024-01-11 (88 days ago) InstallationMedia: Ubuntu 22.04.3 LTS "Jammy Jellyfish" - Release amd64 (20230807.2) MachineType: Dell Inc. XPS 15 9530 PackageArchitecture: all ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic root=UUID=bb015bf7-1f70-468a-9510-ceb36baafb05 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.10, Python 3.10.12, python3-minimal, 3.10.6-1~22.04 PythonDetails: N/A RelatedPackageVersions: grub-pc 2.06-2ubuntu7.2 SourcePackage: linux Title: package linux-tools-common 5.15.0-101.111 failed to install/upgrade: trying to overwrite '/usr/bin/acpidbg', which is also in package linux-intel-iotg-tools-common 5.15.0-1051.57 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/18/2023 dmi.bios.release: 1.10 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.10.0 dmi.board.name: 01WV13 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.ec.firmware.release: 1.4 dmi.modalias: dmi:bvnDellInc.:bvr1.10.0:bd12/18/2023:br1.10:efr1.4:svnDellInc.:pnXPS159530:pvr:rvnDellInc.:rn01WV13:rvrA00:cvnDellInc.:ct10:cvr:sku0BEB: dmi.product.family: XPS dmi.product.name: XPS 15 9530 dmi.product.sku: 0BEB dmi.sys.vendor: Dell Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package jammy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2060428 Title: package linux-tools-common 5.15.0-101.111 failed to install/upgrade: trying to overwrite '/usr/bin/acpidbg', which is also in package linux-intel-iotg-tools-common 5.15.0-1051.57 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2060428/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2059255] [NEW] package linux-tools-common (not installed) failed to install/upgrade: trying to overwrite '/usr/bin/acpidbg', which is also in package linux-intel-iotg-tools-common 5.15.0-1050.56
Public bug reported: $ sudo apt install linux-tools-6.5.0-26-generic linux-cloud-tools-6.5.0-26-generic Reading package lists... Done Building dependency tree... Done Reading state information... Done linux-cloud-tools-6.5.0-26-generic is already the newest version (6.5.0-26.26~22.04.1). The following additional packages will be installed: linux-hwe-6.5-tools-6.5.0-26 linux-tools-common The following NEW packages will be installed: linux-hwe-6.5-tools-6.5.0-26 linux-tools-6.5.0-26-generic linux-tools-common 0 upgraded, 3 newly installed, 0 to remove and 11 not upgraded. Need to get 0 B/8,256 kB of archives. After this operation, 29.1 MB of additional disk space will be used. Do you want to continue? [Y/n] Y Selecting previously unselected package linux-tools-common. (Reading database ... 344041 files and directories currently installed.) Preparing to unpack .../linux-tools-common_5.15.0-101.111_all.deb ... Unpacking linux-tools-common (5.15.0-101.111) ... dpkg: error processing archive /var/cache/apt/archives/linux-tools-common_5.15.0 -101.111_all.deb (--unpack): trying to overwrite '/usr/bin/acpidbg', which is also in package linux-intel-io tg-tools-common 5.15.0-1050.56 dpkg-deb: error: paste subprocess was killed by signal (Broken pipe) Selecting previously unselected package linux-hwe-6.5-tools-6.5.0-26. Preparing to unpack .../linux-hwe-6.5-tools-6.5.0-26_6.5.0-26.26~22.04.1_amd64.d eb ... Unpacking linux-hwe-6.5-tools-6.5.0-26 (6.5.0-26.26~22.04.1) ... Selecting previously unselected package linux-tools-6.5.0-26-generic. Preparing to unpack .../linux-tools-6.5.0-26-generic_6.5.0-26.26~22.04.1_amd64.d eb ... Unpacking linux-tools-6.5.0-26-generic (6.5.0-26.26~22.04.1) ... Errors were encountered while processing: /var/cache/apt/archives/linux-tools-common_5.15.0-101.111_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) ProblemType: Package DistroRelease: Ubuntu 22.04 Package: linux-tools-common (not installed) ProcVersionSignature: Ubuntu 6.5.0-26.26~22.04.1-generic 6.5.13 Uname: Linux 6.5.0-26-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.5 AptOrdering: linux-tools-common:amd64: Install linux-hwe-6.5-tools-6.5.0-26:amd64: Install linux-tools-6.5.0-26-generic:amd64: Install NULL: ConfigurePending Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: boul-iisc 2341 F pulseaudio /dev/snd/pcmC0D0p: boul-iisc 2341 F...m pulseaudio CRDA: N/A CasperMD5CheckResult: pass Date: Wed Mar 27 18:36:09 2024 DpkgTerminalLog: Preparing to unpack .../linux-tools-common_5.15.0-101.111_all.deb ... Unpacking linux-tools-common (5.15.0-101.111) ... [1mdpkg:[0m error processing archive /var/cache/apt/archives/linux-tools-common_5.15.0-101.111_all.deb (--unpack): trying to overwrite '/usr/bin/acpidbg', which is also in package linux-intel-iotg-tools-common 5.15.0-1050.56 ErrorMessage: trying to overwrite '/usr/bin/acpidbg', which is also in package linux-intel-iotg-tools-common 5.15.0-1050.56 InstallationDate: Installed on 2024-01-11 (76 days ago) InstallationMedia: Ubuntu 22.04.3 LTS "Jammy Jellyfish" - Release amd64 (20230807.2) MachineType: Dell Inc. XPS 15 9530 ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic root=UUID=bb015bf7-1f70-468a-9510-ceb36baafb05 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.10, Python 3.10.12, python3-minimal, 3.10.6-1~22.04 PythonDetails: N/A RelatedPackageVersions: grub-pc 2.06-2ubuntu7.2 SourcePackage: linux Title: package linux-tools-common (not installed) failed to install/upgrade: trying to overwrite '/usr/bin/acpidbg', which is also in package linux-intel-iotg-tools-common 5.15.0-1050.56 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/18/2023 dmi.bios.release: 1.10 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.10.0 dmi.board.name: 01WV13 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.ec.firmware.release: 1.4 dmi.modalias: dmi:bvnDellInc.:bvr1.10.0:bd12/18/2023:br1.10:efr1.4:svnDellInc.:pnXPS159530:pvr:rvnDellInc.:rn01WV13:rvrA00:cvnDellInc.:ct10:cvr:sku0BEB: dmi.product.family: XPS dmi.product.name: XPS 15 9530 dmi.product.sku: 0BEB dmi.sys.vendor: Dell Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package jammy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2059255 Title: package linux-tools-common (not installed) failed to install/upgrade: trying to overwrite '/usr/bin/acpidbg', which is also in package linux-intel-iotg-tools-common 5.15.0-1050.56 To manage notifications about this bug go to:
[Bug 2059254] [NEW] package linux-intel-iotg-tools-common 5.15.0-1049.55 [modified: usr/share/man/man1/perf-annotate.1.gz usr/share/man/man1/perf-archive.1.gz usr/share/man/man1/perf-bench.1.gz usr/sh
Public bug reported: The following packages will be upgraded: linux-intel-iotg-tools-common 1 upgraded, 0 newly installed, 0 to remove and 11 not upgraded. 6 not fully installed or removed. Need to get 0 B/304 kB of archives. After this operation, 23.6 kB of additional disk space will be used. Do you want to continue? [Y/n] Y (Reading database ... 344169 files and directories currently installed.) Preparing to unpack .../linux-intel-iotg-tools-common_5.15.0-1050.56_all.deb ... Unpacking linux-intel-iotg-tools-common (5.15.0-1050.56) over (5.15.0-1049.55) ... dpkg: error processing archive /var/cache/apt/archives/linux-intel-iotg-tools-common_5.15.0-1050.56_all.deb (--unpack): trying to overwrite '/usr/bin/acpidbg', which is also in package linux-tools-common 5.15.0-101.111 dpkg-deb: error: paste subprocess was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/linux-intel-iotg-tools-common_5.15.0-1050.56_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) ProblemType: Package DistroRelease: Ubuntu 22.04 ProcVersionSignature: Ubuntu 6.5.0-26.26~22.04.1-generic 6.5.13 Uname: Linux 6.5.0-26-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.5 Architecture: amd64 CasperMD5CheckResult: pass Date: Wed Mar 27 18:18:07 2024 ErrorMessage: trying to overwrite '/usr/bin/acpidbg', which is also in package linux-tools-common 5.15.0-101.111 InstallationDate: Installed on 2024-01-11 (76 days ago) InstallationMedia: Ubuntu 22.04.3 LTS "Jammy Jellyfish" - Release amd64 (20230807.2) PackageArchitecture: all Python3Details: /usr/bin/python3.10, Python 3.10.12, python3-minimal, 3.10.6-1~22.04 PythonDetails: N/A RelatedPackageVersions: dpkg 1.21.1ubuntu2.3 apt 2.4.11 SourcePackage: linux-intel-iotg UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: linux-intel-iotg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package jammy package-conflict -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2059254 Title: package linux-intel-iotg-tools-common 5.15.0-1049.55 [modified: usr/share/man/man1/perf-annotate.1.gz usr/share/man/man1/perf- archive.1.gz usr/share/man/man1/perf-bench.1.gz usr/share/man/man1/perf-buildid-cache.1.gz usr/share/man/man1/perf- buildid-list.1.gz usr/share/man/man1/perf-c2c.1.gz usr/share/man/man1/perf-config.1.gz usr/share/man/man1/perf- daemon.1.gz usr/share/man/man1/perf-data.1.gz usr/share/man/man1/perf- diff.1.gz usr/share/man/man1/perf-dlfilter.1.gz usr/share/man/man1/perf-evlist.1.gz usr/share/man/man1/perf- ftrace.1.gz usr/share/man/man1/perf-help.1.gz usr/share/man/man1/perf- inject.1.gz usr/share/man/man1/perf-intel-pt.1.gz usr/share/man/man1/perf-iostat.1.gz usr/share/man/man1/perf- kallsyms.1.gz usr/share/man/man1/perf-kmem.1.gz usr/share/man/man1/perf-kvm.1.gz usr/share/man/man1/perf-list.1.gz usr/share/man/man1/perf-lock.1.gz usr/share/man/man1/perf-mem.1.gz usr/share/man/man1/perf-probe.1.gz usr/share/man/man1/perf-record.1.gz usr/share/man/man1/perf-report.1.gz usr/share/man/man1/perf-sched.1.gz usr/share/man/man1/perf-script-perl.1.gz usr/share/man/man1/perf- script-python.1.gz usr/share/man/man1/perf-script.1.gz usr/share/man/man1/perf-stat.1.gz usr/share/man/man1/perf-test.1.gz usr/share/man/man1/perf-timechart.1.gz usr/share/man/man1/perf- top.1.gz usr/share/man/man1/perf-trace.1.gz usr/share/man/man1/perf- version.1.gz usr/share/man/man1/perf.1.gz] failed to install/upgrade: trying to overwrite '/usr/bin/acpidbg', which is also in package linux-tools-common 5.15.0-101.111 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-intel-iotg/+bug/2059254/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2058442] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/2058442/+attachment/5757411/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2058442 Title: FP fingerprints are not deleted when user is removed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/2058442/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2058442] Re: FP fingerprints are not deleted when user is removed
apport information ** Tags added: apport-collected jammy ** Description changed: FP: Fingerprint “FP templates were not deleted when user is removed” •From admin user account, create a new user account (user1) and login to it using password. Enroll 2 FP in it. •Lock the user account and login using enrolled FP. Observe that login is successful. •Now login to admin user and delete the newly created account (user1). Select "Delete files" option while removing the account. •Create a new user again (user 1). Observe that FP authentication with previously enrolled FPs still work at login screen. Attached the snapshot of user delete option chosen from GUI. + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu82.5 + Architecture: amd64 + CasperMD5CheckResult: pass + CurrentDesktop: ubuntu:GNOME + DistributionChannelDescriptor: + # This is the distribution channel descriptor for the OEM CDs + # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor + canonical-oem-somerville-jammy-amd64-20220504-33+jellyfish-lapras+X46 + DistroRelease: Ubuntu 22.04 + InstallationDate: Installed on 2023-11-13 (127 days ago) + InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - somerville-jammy-amd64-20220504-33 + Package: gnome-control-center 1:41.7-0ubuntu0.22.04.7 + PackageArchitecture: amd64 + ProcEnviron: + LANGUAGE=en_IN:en + TERM=xterm-256color + PATH=(custom, no user) + LANG=en_IN + SHELL=/bin/bash + ProcVersionSignature: Ubuntu 6.1.0-1025.25-oem 6.1.57 + Tags: jammy + Uname: Linux 6.1.0-1025-oem x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: N/A + _MarkForUpload: True ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/2058442/+attachment/5757410/+files/Dependencies.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2058442 Title: FP fingerprints are not deleted when user is removed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/2058442/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2058442] [NEW] FP fingerprints are not deleted when user is removed
Public bug reported: FP: Fingerprint “FP templates were not deleted when user is removed” •From admin user account, create a new user account (user1) and login to it using password. Enroll 2 FP in it. •Lock the user account and login using enrolled FP. Observe that login is successful. •Now login to admin user and delete the newly created account (user1). Select "Delete files" option while removing the account. •Create a new user again (user 1). Observe that FP authentication with previously enrolled FPs still work at login screen. Attached the snapshot of user delete option chosen from GUI. ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New ** Attachment added: "snapshot of user delete" https://bugs.launchpad.net/bugs/2058442/+attachment/5757401/+files/linux_user_delete.jpg ** Description changed: + FP: Fingerprint “FP templates were not deleted when user is removed” •From admin user account, create a new user account (user1) and login to it using password. Enroll 2 FP in it. •Lock the user account and login using enrolled FP. Observe that login is successful. •Now login to admin user and delete the newly created account (user1). Select "Delete files" option while removing the account. - •Create a new user again (user 1). Observe that FP auth with previously enrolled FPs still work at login screen. + •Create a new user again (user 1). Observe that FP authentication with previously enrolled FPs still work at login screen. Attached the snapshot of user delete option chosen from GUI. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2058442 Title: FP fingerprints are not deleted when user is removed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/2058442/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1973117] Re: Screen sharing switch does not work in Budgie 22.04
** Tags removed: verification-needed-jammy ** Tags added: verification-done-jammy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1973117 Title: Screen sharing switch does not work in Budgie 22.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/budgie-control-center/+bug/1973117/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1973117] Re: Screen sharing switch does not work in Budgie 22.04
Tested from Proposed PPA and screen sharing changes seem to be working fine. Version tested: budgie-control-center/jammy-proposed,now 1.0.1-2ubuntu2 amd64 --- [Test Plan] * Without the package update the follow issue occurs: 1. Open budgie-control-center - choose the Sharing side tab 2. Slide the switch toggle on the headerbar to enable the other sharing options below 3. click on the Screensharing -> arrow 4. This will open a dialog 5. Attempt to click the switch toggle on the new dialog to enable sharing. This will be disabled which means sharing is disabled 6. Close budgie-control-center and restart budgie-control-center again 7. Note that screensharing will have a "no" next to the arrow. [Test Result]: screen sharing toggle is disabled and does not turn on. 8. Confirm this by trying to remmina (or using your favourite VNC client) to the desktop VNC Name / IP Address [Test Result]: Remmina cannot connect to the test machine's screen sharing. * Enable the proposed repo and then install the updates - the following packages needs to be installed sudo apt install budgie-control-center budgie-control-center-data * Test screensharing: 1. Open budgie-control-center - choose the Sharing side tab 2. Slide the switch toggle on the headerbar to enable the other sharing options below 3. click on the Screensharing -> arrow 4. This will open a dialog 5. Click the switch toggle on the new dialog to enable sharing. 6. Close budgie-control-center and restart budgie-control-center again 7. Note "Yes" will be shown next the the screensharing -> arrow. [Test Result]: Screen sharing toggle is enabled and turns on when clicked. 8. Confirm sharing is enabled by trying to remmina (or using your favourite VNC client) to the desktop VNC Name / IP Address 9. Confirm the other options shown in the dialog work as expected i.e. disconnect first from remmina, change the option and connect. [Test Result]: Remmina from another machine connects to screen sharing via VNC successfully. Remmina does not connect by RDP. * Regression testing The testing to ensure no regressions occur in this area. 1. Connect to the screensharing host with the other sharing options [Test Result]: Allow connections to control the screen: Works. When toggled on, can control sharing machine via mouse and keyboard on connecting machine. Control not available when toggled off. New connections must ask for access: Works. When toggled on, request pops up on sharing machine. Sharing works on accepting. Require a password: Works. When toggled on, password input on sharing machine needs entered on connecting machine to start sharing. Show password: Works. Toggles display of password input. Networks: Not available. There was a networks selection option in earlier Ubuntu versions that does not show here. File Sharing: Works. Public folder on sharing machine accessible from connecting machine when switch is toggled on. Require password: Works. Media Sharing: Toggle works. Could not test actual sharing from other media devices. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1973117 Title: Screen sharing switch does not work in Budgie 22.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/budgie-control-center/+bug/1973117/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1973117] Re: Screen sharing switch does not work in Budgie 22.04
Tested from proposed PPA and screen sharing changes seem to be working fine. [Test Plan] * Without the package update the follow issue occurs: 1. Open budgie-control-center - choose the Sharing side tab 2. Slide the switch toggle on the headerbar to enable the other sharing options below 3. click on the Screensharing -> arrow 4. This will open a dialog 5. Attempt to click the switch toggle on the new dialog to enable sharing. This will be disabled which means sharing is disabled 6. Close budgie-control-center and restart budgie-control-center again 7. Note that screensharing will have a "no" next to the arrow. [Test Result]: screen sharing toggle is disabled and does not turn on. 8. Confirm this by trying to remmina (or using your favourite VNC client) to the desktop VNC Name / IP Address [Test Result]: Remmina cannot connect to the test machine's screen sharing. * Enable the proposed repo and then install the updates - the following packages needs to be installed sudo apt install budgie-control-center budgie-control-center-data * Test screensharing: 1. Open budgie-control-center - choose the Sharing side tab 2. Slide the switch toggle on the headerbar to enable the other sharing options below 3. click on the Screensharing -> arrow 4. This will open a dialog 5. Click the switch toggle on the new dialog to enable sharing. 6. Close budgie-control-center and restart budgie-control-center again 7. Note "Yes" will be shown next the the screensharing -> arrow. [Test Result]: Screen sharing toggle is enabled and turns on when clicked. 8. Confirm sharing is enabled by trying to remmina (or using your favourite VNC client) to the desktop VNC Name / IP Address 9. Confirm the other options shown in the dialog work as expected i.e. disconnect first from remmina, change the option and connect. [Test Result]: Remmina from another machine connects to screen sharing via VNC successfully. Remmina does not connect by RDP. * Regression testing The testing to ensure no regressions occur in this area. 1. Connect to the screensharing host with the other sharing options [Test Result]: Allow connections to control the screen: Works. When toggled on, can control sharing machine via mouse and keyboard on connecting machine. Control not available when toggled off. New connections must ask for access: Works. When toggled on, request pops up on sharing machine. Sharing works on accepting. Require a password: Works. When toggled on, password input on sharing machine needs entered on connecting machine to start sharing. Show password: Works. Toggles display of password input. Networks: Not available. There was a networks selection option in earlier Ubuntu versions that does not show here. File Sharing: Works. Public folder on sharing machine accessible from connecting machine when switch is toggled on. Require password: Works. Media Sharing: Toggle works. Could not test actual sharing from other media devices. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1973117 Title: Screen sharing switch does not work in Budgie 22.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/budgie-control-center/+bug/1973117/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1973117] [NEW] Screen sharing switch does not work in Budgie 22.04
Public bug reported: The screen sharing switch does not work in Budgie control center and hence no screen sharing is possible. The toggle to switch on screen sharing is disabled. Ubuntu 22.04 seems to have RDP as default sharing option. The share settings screen looks very different in some videos about standard Ubuntu 22.04, but Budgie’s seems the same as earlier Ubuntu versions. This issue is confirmed by other users here: https://discourse.ubuntubudgie.org/t/screen-sharing-in-budgie-outdated-and-not-functional/ ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: budgie-control-center 1.0.1-2ubuntu1 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 Uname: Linux 5.15.0-27-generic x86_64 ApportVersion: 2.20.11-0ubuntu82 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: Budgie:GNOME Date: Thu May 12 10:04:51 2022 InstallationDate: Installed on 2022-04-23 (18 days ago) InstallationMedia: Ubuntu-Budgie 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) ProcEnviron: LANGUAGE=en_IN:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IN SHELL=/bin/bash SourcePackage: budgie-control-center UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: budgie-control-center (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy ** Attachment added: "budgie-screen-sharing.png" https://bugs.launchpad.net/bugs/1973117/+attachment/5588896/+files/budgie-screen-sharing.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1973117 Title: Screen sharing switch does not work in Budgie 22.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/budgie-control-center/+bug/1973117/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1923418] Re: Fingerprint identification not working when system is idle without screen going blank
Another observation: on Login screen 20.04 version: when esc button is pressed, it is not showing swipe your finger option for few esc key press and it is enabled only after some time. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1923418 Title: Fingerprint identification not working when system is idle without screen going blank To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fprintd/+bug/1923418/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1923419] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1923419/+attachment/5486824/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1923419 Title: FP identification is not working immediately after entering wrong password To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fprintd/+bug/1923419/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1923419] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1923419/+attachment/5486823/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1923419 Title: FP identification is not working immediately after entering wrong password To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fprintd/+bug/1923419/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1923419] Dependencies.txt
apport information ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/1923419/+attachment/5486822/+files/Dependencies.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1923419 Title: FP identification is not working immediately after entering wrong password To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fprintd/+bug/1923419/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1923419] [NEW] FP identification is not working immediately after entering wrong password
Public bug reported: Issue: FP identification is not working immediately after entering wrong password System prerequisite: FP enrolled on system, Identify works fine. OS: Verified on: 20.04 PPA release. • Lock the screen • Enter wrong regular password and press enter. • Observe that "please try again" error is shown. • Now try to login using enrolled FP. Observe that FP gets detected (FW uart log shows that FP is detected) but there will be no change in the login screen. • Need to enter password to login into user account or Hit enter again, login screen will show the Swipe your finger option and FP identify works. Attached the fprintd debug log. Events actions are mentioned with this symbol <==> at attached output. Post wrong password attempt, FW is immediately ready to capture the finger, but host is saying device is already claimed and acquiring after hitting enter key again. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.16 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-09-24 (200 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) Package: fprintd 1.90.9-1~ubuntu20.04.1 [origin: LP-PPA-ci-train-ppa-service-4509.1] PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.8.0-44.50~20.04.1-generic 5.8.18 Tags: third-party-packages focal Uname: Linux 5.8.0-44-generic x86_64 UnreportableReason: This is not an official Ubuntu package. Please remove any third party package and try again. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True ** Affects: fprintd (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected focal third-party-packages ** Attachment added: "CS_5267_fprintd_log.txt" https://bugs.launchpad.net/bugs/1923419/+attachment/5486821/+files/CS_5267_fprintd_log.txt ** Tags added: apport-collected focal third-party-packages ** Description changed: Issue: FP identification is not working immediately after entering wrong password System prerequisite: FP enrolled on system, Identify works fine. OS: Verified on: 20.04 PPA release. • Lock the screen • Enter wrong regular password and press enter. • Observe that "please try again" error is shown. • Now try to login using enrolled FP. Observe that FP gets detected (FW uart log shows that FP is detected) but there will be no change in the login screen. • Need to enter password to login into user account or Hit enter again, login screen will show the Swipe your finger option and FP identify works. Attached the fprintd debug log. Events actions are mentioned with this symbol <==> at attached output. Post wrong password attempt, FW is immediately ready to capture the finger, but host is saying device is already claimed and acquiring after hitting enter key again. + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu27.16 + Architecture: amd64 + CasperMD5CheckResult: skip + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 20.04 + InstallationDate: Installed on 2020-09-24 (200 days ago) + InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) + Package: fprintd 1.90.9-1~ubuntu20.04.1 [origin: LP-PPA-ci-train-ppa-service-4509.1] + PackageArchitecture: amd64 + ProcVersionSignature: Ubuntu 5.8.0-44.50~20.04.1-generic 5.8.18 + Tags: third-party-packages focal + Uname: Linux 5.8.0-44-generic x86_64 + UnreportableReason: This is not an official Ubuntu package. Please remove any third party package and try again. + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo + _MarkForUpload: True -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1923419 Title: FP identification is not working immediately after entering wrong password To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fprintd/+bug/1923419/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1923418] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1923418/+attachment/5486820/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1923418 Title: Fingerprint identification not working when system is idle without screen going blank To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fprintd/+bug/1923418/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1923418] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1923418/+attachment/5486819/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1923418 Title: Fingerprint identification not working when system is idle without screen going blank To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fprintd/+bug/1923418/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1923418] Dependencies.txt
apport information ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/1923418/+attachment/5486818/+files/Dependencies.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1923418 Title: Fingerprint identification not working when system is idle without screen going blank To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fprintd/+bug/1923418/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1923418] [NEW] Fingerprint identification not working when system is idle without screen going blank
Public bug reported: Issue: Fingerprint identification not working when system is idle without screen going blank Setup System prerequisite: FP enrolled on system, Identify works fine. OS: Verified on: 20.04 PPA release. Steps to reproduce: • Now lock the user again. Select the User. • Leave the laptop idle for 30sec, swipe mouse across and don’t allow the system to go for sleep for 30 seconds. Place the enrolled FP on reader post 30 seconds. • Observe that FP doesn't get detected at login screen. • Need to enter password to login into user account. • Note: "Swipe finger" option at login screen is still shown even if FP doesn't get detected Attached the fprintd debug log. Events actions are mentioned with this symbol <==> at attached output. <==> Some timeout is observed and after this Host is releasing the device and Identification is working only after hitting Enter key to start identification process, timeout is not generated from FW and FW is ready to accept the finger swipe. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.16 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-09-24 (200 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) Package: fprintd 1.90.9-1~ubuntu20.04.1 [origin: LP-PPA-ci-train-ppa-service-4509.1] PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.8.0-44.50~20.04.1-generic 5.8.18 Tags: third-party-packages focal Uname: Linux 5.8.0-44-generic x86_64 UnreportableReason: This is not an official Ubuntu package. Please remove any third party package and try again. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True ** Affects: fprintd (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected focal third-party-packages ** Attachment added: "CS_5266.txt" https://bugs.launchpad.net/bugs/1923418/+attachment/5486817/+files/CS_5266.txt ** Tags added: apport-collected focal third-party-packages ** Description changed: Issue: Fingerprint identification not working when system is idle without screen going blank Setup System prerequisite: FP enrolled on system, Identify works fine. OS: Verified on: 20.04 PPA release. Steps to reproduce: • Now lock the user again. Select the User. • Leave the laptop idle for 30sec, swipe mouse across and don’t allow the system to go for sleep for 30 seconds. Place the enrolled FP on reader post 30 seconds. • Observe that FP doesn't get detected at login screen. • Need to enter password to login into user account. • Note: "Swipe finger" option at login screen is still shown even if FP doesn't get detected Attached the fprintd debug log. Events actions are mentioned with this symbol <==> at attached output. - <==> Some timeout is observed and after this Host is releasing the - device and Identification is working only after hitting Enter key to - start identification process, timeout is not generated from FW and FW is - ready to accept the finger swipe. + <==> Some timeout is observed and after this Host is releasing the device and Identification is working only after hitting Enter key to start identification process, timeout is not generated from FW and FW is ready to accept the finger swipe. + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu27.16 + Architecture: amd64 + CasperMD5CheckResult: skip + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 20.04 + InstallationDate: Installed on 2020-09-24 (200 days ago) + InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) + Package: fprintd 1.90.9-1~ubuntu20.04.1 [origin: LP-PPA-ci-train-ppa-service-4509.1] + PackageArchitecture: amd64 + ProcVersionSignature: Ubuntu 5.8.0-44.50~20.04.1-generic 5.8.18 + Tags: third-party-packages focal + Uname: Linux 5.8.0-44-generic x86_64 + UnreportableReason: This is not an official Ubuntu package. Please remove any third party package and try again. + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo + _MarkForUpload: True -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1923418 Title: Fingerprint identification not working when system is idle without screen going blank To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fprintd/+bug/1923418/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893059] Re: Need information: Finger print sensor disabled after some incorrect failure attempts either consecutively or not in sequence with a count of some number
This issue is fixed in libfprint v1.90.2 ** Changed in: fprintd (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893059 Title: Need information: Finger print sensor disabled after some incorrect failure attempts either consecutively or not in sequence with a count of some number To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fprintd/+bug/1893059/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1882878] Re: The user panel let you enroll the same finger several times
FP_DEVICE_ERROR_DATA_DUPLICATE error is added in libfprint 1.90.3 version, but when driver is returned this error, UI is not showing as duplicate finger error and showing Fingerprint enroll is failed, UI should show proper error here. And also, post this failure, next finger enrollment is failed until system restart. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1882878 Title: The user panel let you enroll the same finger several times To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-control-center/+bug/1882878/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1882880] Re: FP Auth enroll screen issue: Max limit not defined
** Changed in: gnome-control-center (Ubuntu) Status: Expired => New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1882880 Title: FP Auth enroll screen issue: Max limit not defined To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1882880/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1902018] Re: Fingerprint: "scan your finger" option is not displayed at login screen on ubuntu 20.10 version
ScanYourFinger message is not visible, FP is enrolled, Fingerprint identification also working fine. ** Attachment removed: "IMG_0054.jpg" https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1902018/+attachment/5429346/+files/IMG_0054.jpg ** Attachment added: "ScanYourFinger message is not visible, FP is enrolled" https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1902018/+attachment/5430192/+files/IMG_0123.jpg -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1902018 Title: Fingerprint: "scan your finger" option is not displayed at login screen on ubuntu 20.10 version To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1902018/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1902018] Re: Fingerprint: "scan your finger" option is not displayed at login screen on ubuntu 20.10 version
Attached login screen doesn't show 'scan your finger' message ** Attachment added: "IMG_0054.jpg" https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1902018/+attachment/5429346/+files/IMG_0054.jpg -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1902018 Title: Fingerprint: "scan your finger" option is not displayed at login screen on ubuntu 20.10 version To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1902018/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1902018] Re: Fingerprint: "scan your finger" option is not displayed at login screen on ubuntu 20.10 version
attached log output of 'journalctl -b 0' , login screen doesn't show the message of 'scan your finger' but fingerprint identify operation works fine. ** Attachment added: "3.txt" https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1902018/+attachment/5429345/+files/3.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1902018 Title: Fingerprint: "scan your finger" option is not displayed at login screen on ubuntu 20.10 version To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1902018/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1902018] Dependencies.txt
apport information ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/1902018/+attachment/5428917/+files/Dependencies.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1902018 Title: Fingerprint: "scan your finger" option is not displayed at login screen on ubuntu 20.10 version To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1902018/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1902018] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1902018/+attachment/5428918/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1902018 Title: Fingerprint: "scan your finger" option is not displayed at login screen on ubuntu 20.10 version To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1902018/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1902018] [NEW] Fingerprint: "scan your finger" option is not displayed at login screen on ubuntu 20.10 version
Public bug reported: OS: Ubuntu 20.10 version Test sequence: Fingeprint is enrolled Win+L: At login screen, earlier in 20.04 version, it used to display "scan your finger", it is not displayed in 20.10 version, but fingerprint identify is working fine. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-09-29 (29 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) Package: gnome-control-center 1:3.38.1-1ubuntu1 PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.8.0-25.26-generic 5.8.14 Tags: groovy Uname: Linux 5.8.0-25-generic x86_64 UpgradeStatus: Upgraded to groovy on 2020-10-27 (1 days ago) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected groovy ** Tags added: apport-collected groovy ** Description changed: OS: Ubuntu 20.10 version Test sequence: Fingeprint is enrolled Win+L: At login screen, earlier in 20.04 version, it used to display "scan your finger", it is not displayed in 20.10 version, but fingerprint identify is working fine. + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu50 + Architecture: amd64 + CasperMD5CheckResult: skip + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 20.10 + InstallationDate: Installed on 2020-09-29 (29 days ago) + InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) + Package: gnome-control-center 1:3.38.1-1ubuntu1 + PackageArchitecture: amd64 + ProcVersionSignature: Ubuntu 5.8.0-25.26-generic 5.8.14 + Tags: groovy + Uname: Linux 5.8.0-25-generic x86_64 + UpgradeStatus: Upgraded to groovy on 2020-10-27 (1 days ago) + UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo + _MarkForUpload: True -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1902018 Title: Fingerprint: "scan your finger" option is not displayed at login screen on ubuntu 20.10 version To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1902018/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1902018] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1902018/+attachment/5428919/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1902018 Title: Fingerprint: "scan your finger" option is not displayed at login screen on ubuntu 20.10 version To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1902018/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1899779] [NEW] Finger Print authentication doesn't work after logout in linux
Public bug reported: Setup: Dell laptop with inbuilt fingerprint module Below modules installed: 1) fprintd (1.90.1-1ubuntu1) 2) libpam-fprintd (1.90.1-1ubuntu1) 3) libfprint-2-tod-dev (1:1.90.2+tod1-0ubuntu1~20.04.1) 4) Installed Broadcom TOD driver Test procedure steps: Logout from the user Try to authenticate with enrolled FP Observe that FP authentication allows login, but immediately asks for user password with error, attached screenshot of error "The login keyring did not get unlocked when you logged into your computer" journlctl log didn't had any specific errors mentioned and log comes out is same for regular FP identify and post log-off and FP identify. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.9 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-09-24 (20 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) NonfreeKernelModules: lkp_Ubuntu_5_4_0_48_52_generic_72 Package: gnome-control-center 1:3.36.4-0ubuntu1 PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.4.0-48.52-generic 5.4.60 Tags: focal Uname: Linux 5.4.0-48-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected focal ** Attachment added: "screenshot" https://bugs.launchpad.net/bugs/1899779/+attachment/5422174/+files/FingerprintIdentifyIssuePostUserLogOff.jpg ** Tags added: apport-collected focal ** Description changed: Setup: Dell laptop with inbuilt fingerprint module Below modules installed: 1) fprintd (1.90.1-1ubuntu1) 2) libpam-fprintd (1.90.1-1ubuntu1) 3) libfprint-2-tod-dev (1:1.90.2+tod1-0ubuntu1~20.04.1) 4) Installed Broadcom TOD driver Test procedure steps: Logout from the user Try to authenticate with enrolled FP Observe that FP authentication allows login, but immediately asks for user password with error, attached screenshot of error "The login keyring did not get unlocked when you logged into your computer" - journlctl log didn't had any specific errors mentioned and log comes out - is same for regular FP identify and post log-off and FP identify. + journlctl log didn't had any specific errors mentioned and log comes out is same for regular FP identify and post log-off and FP identify. + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu27.9 + Architecture: amd64 + CasperMD5CheckResult: skip + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 20.04 + InstallationDate: Installed on 2020-09-24 (20 days ago) + InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) + NonfreeKernelModules: lkp_Ubuntu_5_4_0_48_52_generic_72 + Package: gnome-control-center 1:3.36.4-0ubuntu1 + PackageArchitecture: amd64 + ProcVersionSignature: Ubuntu 5.4.0-48.52-generic 5.4.60 + Tags: focal + Uname: Linux 5.4.0-48-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo + _MarkForUpload: True -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1899779 Title: Finger Print authentication doesn't work after logout in linux To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1899779/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1899779] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1899779/+attachment/5422177/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1899779 Title: Finger Print authentication doesn't work after logout in linux To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1899779/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1899779] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1899779/+attachment/5422176/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1899779 Title: Finger Print authentication doesn't work after logout in linux To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1899779/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1899779] Dependencies.txt
apport information ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/1899779/+attachment/5422175/+files/Dependencies.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1899779 Title: Finger Print authentication doesn't work after logout in linux To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1899779/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1897693] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1897693/+attachment/5415172/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1897693 Title: Fingerprint enroll progress is NOT displayed for immediate 2nd fingerprint enrollment To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1897693/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1897693] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1897693/+attachment/5415171/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1897693 Title: Fingerprint enroll progress is NOT displayed for immediate 2nd fingerprint enrollment To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1897693/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1897693] Dependencies.txt
apport information ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/1897693/+attachment/5415170/+files/Dependencies.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1897693 Title: Fingerprint enroll progress is NOT displayed for immediate 2nd fingerprint enrollment To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1897693/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1897693] [NEW] Fingerprint enroll progress is NOT displayed for immediate 2nd fingerprint enrollment
Public bug reported: Fingerprint enroll progress is NOT displayed for immediate 2nd fingerprint enrollment with out closing the FP GUI. 2nd finger enrollment: After first swipe of 2nd FP, even though progress is not displayed on circle for 2nd fingerprint, it is properly enrolled after continuous swipe and later it will be identified, but user will have confusion about appearance that is the 2nd finger enrollment is happening or not. Steps to reproduce: Enroll 1st FP ==> enrollment progress is shown on circle, after it completes, don't close GUI, proceed with 2nd finger enrollment Enroll the second FP ==> observe that enrollment progress is NOT shown on circle, but if we keep on placing finger, after few attempts, finger will be enrolled. verified on two DELL models model-1: latitude 7300: 2nd fp enrollment progress is shown for 1 or 2 swipes, but didn't completed the progress circle. model-2: latitude 7520: 2nd fp enrollment progress is NOT shown at all Both cases 2nd FP enrollment is done and later it is also identified, only progress is NOT displayed. journlctl --unit fprintd.service was shown the messages of fingerprint enroll swipes properly with out any issues "Capture initiated, please place your finger now n the sensor now" for all swipes. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.4 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-09-24 (5 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) Package: gnome-control-center 1:3.36.4-0ubuntu1 PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 5.4.0-48.52-generic 5.4.60 Tags: focal Uname: Linux 5.4.0-48-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected focal ** Tags added: apport-collected focal ** Description changed: Fingerprint enroll progress is NOT displayed for immediate 2nd fingerprint enrollment with out closing the FP GUI. 2nd finger enrollment: After first swipe of 2nd FP, even though progress is not displayed on circle for 2nd fingerprint, it is properly enrolled after continuous swipe and later it will be identified, but user will have confusion about appearance that is the 2nd finger enrollment is happening or not. Steps to reproduce: Enroll 1st FP ==> enrollment progress is shown on circle, after it completes, don't close GUI, proceed with 2nd finger enrollment Enroll the second FP ==> observe that enrollment progress is NOT shown on circle, but if we keep on placing finger, after few attempts, finger will be enrolled. verified on two DELL models model-1: latitude 7300: 2nd fp enrollment progress is shown for 1 or 2 swipes, but didn't completed the progress circle. model-2: latitude 7520: 2nd fp enrollment progress is NOT shown at all Both cases 2nd FP enrollment is done and later it is also identified, only progress is NOT displayed. journlctl --unit fprintd.service was shown the messages of fingerprint enroll swipes properly with out any issues - "Capture initiated, please place your finger now n the sensor now" for - all swipes. + "Capture initiated, please place your finger now n the sensor now" for all swipes. + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu27.4 + Architecture: amd64 + CasperMD5CheckResult: skip + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 20.04 + InstallationDate: Installed on 2020-09-24 (5 days ago) + InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) + Package: gnome-control-center 1:3.36.4-0ubuntu1 + PackageArchitecture: amd64 + ProcVersionSignature: Ubuntu 5.4.0-48.52-generic 5.4.60 + Tags: focal + Uname: Linux 5.4.0-48-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo + _MarkForUpload: True -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1897693 Title: Fingerprint enroll progress is NOT displayed for immediate 2nd fingerprint enrollment To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1897693/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893746] Re: fingerprint cancel operation is taking 50 seconds to cancel GUI window
Time took between last 2 lines and verified from fingerprint device that, there is no delay occurred from device side. 17:20:14.429: Start the enrollment 17:20:14.441: Update the enrollment Capture Initiated, Please place your finger now on the sensor now 17:20:17.432: Idle cancelling on ongoing operation! 17:20:17.432: device_cancel - start - 17:20:17.432: device_cancel - end - 17:20:17.432: Idle cancelling completed operation! 17:20:42.433: file_storage_discover_prints() for user 'adminuser' in '/var/lib/fprint/adminuser/broadcom/0' -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893746 Title: fingerprint cancel operation is taking 50 seconds to cancel GUI window To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fprintd/+bug/1893746/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893059] Re: Need information: Finger print sensor disabled after some incorrect failure attempts either consecutively or not in sequence with a count of some number
** Package changed: gnome-control-center (Ubuntu) => fprintd (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893059 Title: Need information: Finger print sensor disabled after some incorrect failure attempts either consecutively or not in sequence with a count of some number To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fprintd/+bug/1893059/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893746] [NEW] fingerprint cancel operation is taking 50 seconds to cancel GUI window
Public bug reported: Test procedure to reproduce the issue: 1) click on fingerprint login for respective user 2) click next button 3) immediately click on cancel or back button 4) Observe a delay of 50 second is observed to comeback Expectation: should not take long enough to cancel operation fprind.service log Sep 01 13:21:04 adminuser-Latitude-5411 fprintd[2648]: file_storage_discover_prints() for user 'adminuser' in '/var/lib/fprint/adminuser/broadcom/0' Sep 01 13:21:11 adminuser-Latitude-5411 fprintd[2648]: file_storage_discover_prints() for user 'adminuser' in '/var/lib/fprint/adminuser/broadcom/0' Sep 01 13:21:11 adminuser-Latitude-5411 fprintd[2648]: user 'adminuser' claiming the device: 0 Sep 01 13:21:11 adminuser-Latitude-5411 fprintd[2648]: Device reported open completion Sep 01 13:21:11 adminuser-Latitude-5411 fprintd[2648]: Completing action 2 in idle! Sep 01 13:21:11 adminuser-Latitude-5411 fprintd[2648]: claimed device 0 Sep 01 13:21:29 adminuser-Latitude-5411 fprintd[2648]: start enrollment device 0 finger 6 Sep 01 13:21:29 adminuser-Latitude-5411 fprintd[2648]: Start the enrollment Sep 01 13:21:29 adminuser-Latitude-5411 fprintd[2648]: Update the enrollment Sep 01 13:21:53 adminuser-Latitude-5411 fprintd[2648]: Idle cancelling on ongoing operation! Sep 01 13:22:18 adminuser-Latitude-5411 fprintd[2648]: file_storage_discover_prints() for user 'adminuser' in '/var/lib/fprint/adminuser/broadcom/0' Sep 01 13:22:30 adminuser-Latitude-5411 fprintd[2648]: Device reported enroll completion Sep 01 13:22:30 adminuser-Latitude-5411 fprintd[2648]: Completing action 4 in idle! Sep 01 13:22:30 adminuser-Latitude-5411 fprintd[2648]: enroll_cb: result enroll-failed Sep 01 13:37:13 adminuser-Latitude-5411 fprintd[2648]: file_storage_discover_prints() for user 'adminuser' in '/var/lib/fprint/adminuser/broadcom/0' ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: fprintd (not installed) ProcVersionSignature: Ubuntu 5.4.0-45.49-generic 5.4.55 Uname: Linux 5.4.0-45-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.8 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Tue Sep 1 13:37:38 2020 InstallationDate: Installed on 2020-08-14 (17 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) ProcEnviron: LANGUAGE=en_IN:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IN SHELL=/bin/bash SourcePackage: fprintd UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: fprintd (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893746 Title: fingerprint cancel operation is taking 50 seconds to cancel GUI window To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fprintd/+bug/1893746/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893059] Re: Need information: Finger print sensor disabled after some incorrect failure attempts either consecutively or not in sequence with a count of some number
name of the package affected or relevant to this issue is: fprintd & libfprint. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893059 Title: Need information: Finger print sensor disabled after some incorrect failure attempts either consecutively or not in sequence with a count of some number To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1893059/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893059] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1893059/+attachment/5406030/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893059 Title: Need information: Finger print sensor disabled after some incorrect failure attempts either consecutively or not in sequence with a count of some number To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1893059/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893059] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1893059/+attachment/5406031/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893059 Title: Need information: Finger print sensor disabled after some incorrect failure attempts either consecutively or not in sequence with a count of some number To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1893059/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893059] Re: Need information: Finger print sensor disabled after some incorrect failure attempts either consecutively or not in sequence with a count of some number
apport information ** Tags added: apport-collected focal ** Description changed: Observation: It is observed that finger print sensor is disabled after few failure attempts not in sequence with a count of some number of attempts. Is there any such count requirement of disabling Fingerprint sensor for few seconds after some incorrect failure attempts not in sequence with a count of "X" ?, it is observed failure with below sequence: WF - wrong finger, CF - correct finger WF, WF, CF, WF, WF, CF, WF, WF, CF, WF, WF, CF, WF, WF, CF, WF, WF, CF, WF, WF, CF, WF, WF I have looked at fprintd service logs from host and didn't observed any different commands received from host when the fingerprint is disabled for few seconds. Need some clarity on behavior of this feature and if there is any document or link explains the requirements of Fingerprint application behavior will be helpful in understanding the host behavior. Kindly let me know if i can provide any extra information. Thanks, Prafulla Kota + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu27.8 + Architecture: amd64 + CasperMD5CheckResult: skip + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 20.04 + InstallationDate: Installed on 2020-08-14 (16 days ago) + InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) + NonfreeKernelModules: lkp_Ubuntu_5_4_0_42_46_generic_70 nvidia_modeset nvidia + Package: gnome-control-center 1:3.36.4-0ubuntu1 + PackageArchitecture: amd64 + ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44 + Tags: focal + Uname: Linux 5.4.0-42-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo + _MarkForUpload: True ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/1893059/+attachment/5406029/+files/Dependencies.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893059 Title: Need information: Finger print sensor disabled after some incorrect failure attempts either consecutively or not in sequence with a count of some number To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1893059/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
RE: [Bug 1893601] Re: 4k not working
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893601 Title: 4k not working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1893601/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 1893601] Re: 4k not working
Hi Daniel, Thank you for your quick response. The details are here. 1. Selecting 'Ubuntu on Wayland' from the login screen. Do you now get 4K modes offered in Settings? - I don't see any Wayland option. The max resolution at Display Settings is 1080p. 2. Run: grep . /sys/class/drm/*/modes > kernel-modes.txt - Attached the file. Thanks and Regards, Vimal Raj (949)310-5218 On Sun, Aug 30, 2020 at 9:05 PM Daniel van Vugt <1893...@bugs.launchpad.net> wrote: > Please try: > > 1. Selecting 'Ubuntu on Wayland' from the login screen. Do you now get > 4K modes offered in Settings? > > 2. Run: > >grep . /sys/class/drm/*/modes > kernel-modes.txt > >and then attach the resulting text file here. > > > ** Package changed: xorg (Ubuntu) => xorg-server (Ubuntu) > > ** Changed in: xorg-server (Ubuntu) >Status: New => Incomplete > > ** Also affects: linux (Ubuntu) >Importance: Undecided >Status: New > > ** Changed in: linux (Ubuntu) >Status: New => Incomplete > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1893601 > > Title: > 4k not working > > Status in linux package in Ubuntu: > Incomplete > Status in xorg-server package in Ubuntu: > Incomplete > > Bug description: > Windows 10 is working with 4k monitor, but not Ubuntu 20.04 LTS. > > ProblemType: Bug > DistroRelease: Ubuntu 20.04 > Package: xorg 1:7.7+19ubuntu14 > ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44 > Uname: Linux 5.4.0-42-generic x86_64 > ApportVersion: 2.20.11-0ubuntu27.8 > Architecture: amd64 > BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' > CasperMD5CheckResult: skip > CompositorRunning: None > CurrentDesktop: ubuntu:GNOME > Date: Sun Aug 30 20:35:52 2020 > DistUpgraded: Fresh install > DistroCodename: focal > DistroVariant: ubuntu > DkmsStatus: virtualbox, 6.1.10, 5.4.0-42-generic, x86_64: installed > ExtraDebuggingInterest: No > GraphicsCard: >Intel Corporation HD Graphics 530 [8086:1912] (rev 06) (prog-if 00 [VGA > controller]) > Subsystem: Hewlett-Packard Company HD Graphics 530 [103c:81b4] > InstallationDate: Installed on 2020-08-28 (2 days ago) > InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 > (20200731) > Lsusb: >Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub >Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver >Bus 001 Device 002: ID 413c:2113 Dell Computer Corp. Dell KB216 Wired > Keyboard >Bus 001 Device 004: ID 8087:0aa7 Intel Corp. >Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > MachineType: HP 510-p114 > ProcEnviron: >TERM=xterm-256color >PATH=(custom, no user) >XDG_RUNTIME_DIR= >LANG=en_US.UTF-8 >SHELL=/bin/bash > ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-42-generic > root=UUID=906d29e9-4c50-43be-a8f5-2f6d9df94188 ro quiet splash vt.handoff=7 > SourcePackage: xorg > UpgradeStatus: No upgrade log present (probably fresh install) > dmi.bios.date: 08/02/2016 > dmi.bios.vendor: AMI > dmi.bios.version: F.13 > dmi.board.asset.tag: CNV6370S3L > dmi.board.name: 81B4 > dmi.board.vendor: HP > dmi.board.version: 00 > dmi.chassis.asset.tag: CNV6370S3L > dmi.chassis.type: 3 > dmi.chassis.vendor: HP > dmi.modalias: > dmi:bvnAMI:bvrF.13:bd08/02/2016:svnHP:pn510-p114:pvr:rvnHP:rn81B4:rvr00:cvnHP:ct3:cvr: > dmi.product.family: 103C_53316J G=D > dmi.product.name: 510-p114 > dmi.product.sku: X6F90AA#ABA > dmi.sys.vendor: HP > version.compiz: compiz N/A > version.libdrm2: libdrm2 2.4.101-2 > version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.8-0ubuntu1~20.04.1 > version.libgl1-mesa-glx: libgl1-mesa-glx N/A > version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2.2 > version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A > version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 > version.xserver-xorg-video-intel: xserver-xorg-video-intel > 2:2.99.917+git20200226-1 > version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1893601/+subscriptions > ** Attachment added: "kernel-modes.txt" https://bugs.launchpad.net/bugs/1893601/+attachment/5405992/+files/kernel-modes.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893601 Title: 4k not working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1893601/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893601] [NEW] 4k not working
Public bug reported: Windows 10 is working with 4k monitor, but not Ubuntu 20.04 LTS. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44 Uname: Linux 5.4.0-42-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.8 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sun Aug 30 20:35:52 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu DkmsStatus: virtualbox, 6.1.10, 5.4.0-42-generic, x86_64: installed ExtraDebuggingInterest: No GraphicsCard: Intel Corporation HD Graphics 530 [8086:1912] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company HD Graphics 530 [103c:81b4] InstallationDate: Installed on 2020-08-28 (2 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 001 Device 002: ID 413c:2113 Dell Computer Corp. Dell KB216 Wired Keyboard Bus 001 Device 004: ID 8087:0aa7 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: HP 510-p114 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-42-generic root=UUID=906d29e9-4c50-43be-a8f5-2f6d9df94188 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/02/2016 dmi.bios.vendor: AMI dmi.bios.version: F.13 dmi.board.asset.tag: CNV6370S3L dmi.board.name: 81B4 dmi.board.vendor: HP dmi.board.version: 00 dmi.chassis.asset.tag: CNV6370S3L dmi.chassis.type: 3 dmi.chassis.vendor: HP dmi.modalias: dmi:bvnAMI:bvrF.13:bd08/02/2016:svnHP:pn510-p114:pvr:rvnHP:rn81B4:rvr00:cvnHP:ct3:cvr: dmi.product.family: 103C_53316J G=D dmi.product.name: 510-p114 dmi.product.sku: X6F90AA#ABA dmi.sys.vendor: HP version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.101-2 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.8-0ubuntu1~20.04.1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893601 Title: 4k not working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1893601/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893059] [NEW] Need information: Finger print sensor disabled after some incorrect failure attempts either consecutively or not in sequence with a count of some number
Public bug reported: Observation: It is observed that finger print sensor is disabled after few failure attempts not in sequence with a count of some number of attempts. Is there any such count requirement of disabling Fingerprint sensor for few seconds after some incorrect failure attempts not in sequence with a count of "X" ?, it is observed failure with below sequence: WF - wrong finger, CF - correct finger WF, WF, CF, WF, WF, CF, WF, WF, CF, WF, WF, CF, WF, WF, CF, WF, WF, CF, WF, WF, CF, WF, WF I have looked at fprintd service logs from host and didn't observed any different commands received from host when the fingerprint is disabled for few seconds. Need some clarity on behavior of this feature and if there is any document or link explains the requirements of Fingerprint application behavior will be helpful in understanding the host behavior. Kindly let me know if i can provide any extra information. Thanks, Prafulla Kota ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893059 Title: Need information: Finger print sensor disabled after some incorrect failure attempts either consecutively or not in sequence with a count of some number To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1893059/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1316884] Re: The installer encountered an error copying files to the hard disk:
how to repair this error -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1316884 Title: The installer encountered an error copying files to the hard disk: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1316884/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1872796] Re: gnome-shell animations are noticeably stuttery when the Ubuntu extensions are enabled
Hi, I don't know if this is going to help, but I was experience a similar problem in Popos 20.04. In my case, the misbehaving app turned out to be Mega from mega.nz which I use for cloud sync. Their ubuntu 20.04 deb package causes noticeable stuttering. After disabling the app the desktop becomes smooth again. After enabling it again the computer becomes fast and smooth. This problem did not exist in 19.10 using mega's deb for 19.10. The stuttering happens across the board, in every activity randomly. Thanks. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1872796 Title: gnome-shell animations are noticeably stuttery when the Ubuntu extensions are enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1872796/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1874975] [NEW] grub2 crashed during installation
Public bug reported: I am trying to install Ubuntu on a machine with windows 10 already installed. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: ubiquity 20.04.15 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckResult: pass CasperVersion: 1.445 CurrentDesktop: ubuntu:GNOME Date: Sat Apr 25 17:54:56 2020 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed maybe-ubiquity quiet splash --- LiveMediaBuild: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) ProcEnviron: LANGUAGE=en_IN PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IN LC_NUMERIC=C.UTF-8 SourcePackage: grub-installer UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: grub-installer (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal ubiquity-20.04.15 ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1874975 Title: grub2 crashed during installation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub-installer/+bug/1874975/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1860541] [NEW] package etcd 2.2.5+dfsg-1ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: lsb_release -rd root@master:~# apt-cache policy etcd etcd: Installed: 2.2.5+dfsg-1ubuntu1 Candidate: 2.2.5+dfsg-1ubuntu1 Version table: *** 2.2.5+dfsg-1ubuntu1 500 500 http://us.archive.ubuntu.com/ubuntu xenial-updates/universe amd64 Packages 100 /var/lib/dpkg/status 2.2.5+dfsg-1 500 500 http://us.archive.ubuntu.com/ubuntu xenial/universe amd64 Packages root@master:~# ProblemType: Package DistroRelease: Ubuntu 16.04 Package: etcd 2.2.5+dfsg-1ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-74.83~16.04.1-generic 4.15.18 Uname: Linux 4.15.0-74-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.21 AptOrdering: libbsd0: Install etcd: Configure libbsd0: Configure NULL: ConfigurePending Architecture: amd64 Date: Wed Jan 22 06:33:48 2020 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationDate: Installed on 2019-03-01 (327 days ago) InstallationMedia: Ubuntu 16.04.6 LTS "Xenial Xerus" - Release amd64 (20190227) RelatedPackageVersions: dpkg 1.18.4ubuntu1.6 apt 1.2.32 SourcePackage: etcd Title: package etcd 2.2.5+dfsg-1ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: etcd (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860541 Title: package etcd 2.2.5+dfsg-1ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/etcd/+bug/1860541/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1828784] [NEW] nouveau driver display garbled after clicking ubuntu search menu button
Public bug reported: Display garbled after clicking ubuntu search menu button when using Nvidia Display driver "nouveau". Encountered this multiple times but doesn't happen all the time, frequency is once in 50. The messages look like this: May 13 12:01:32 Gilli-Desk kernel: [1213168.193257] nouveau :02:00.0: compiz[2374]: fail ttm_validate May 13 12:01:32 Gilli-Desk kernel: [1213168.193264] nouveau :02:00.0: compiz[2374]: validating bo list May 13 12:01:32 Gilli-Desk kernel: [1213168.193293] nouveau :02:00.0: compiz[2374]: validate: -12 May 13 12:01:32 Gilli-Desk kernel: [1213168.353666] nouveau :02:00.0: gr: TRAP_PROP - TP 1 - 0040 [RT_FAULT] - Address 004c631600 May 13 12:01:32 Gilli-Desk kernel: [1213168.353675] nouveau :02:00.0: gr: TRAP_PROP - TP 1 - e0c: , e18: , e1c: 00180018, e20: 1100, e24: 0003 May 13 12:01:32 Gilli-Desk kernel: [1213168.353681] nouveau :02:00.0: gr: 0020 [] ch 4 [000f945000 compiz[2374]] subc 3 class 8297 mthd 1b0c data 1000f010 May 13 12:01:32 Gilli-Desk kernel: [1213168.353693] nouveau :02:00.0: fb: trapped write at 004c631600 on channel 4 [0f945000 compiz[2374]] engine 00 [PGRAPH] client 0b [PROP] subclient 00 [RT0] reason 0002 [PAGE_NOT_PRESENT] May 13 12:01:32 Gilli-Desk kernel: [1213168.353721] nouveau :02:00.0: gr: TRAP_PROP - TP 1 - 0040 [RT_FAULT] - Address 004c64b700 May 13 12:01:32 Gilli-Desk kernel: [1213168.353726] nouveau :02:00.0: gr: TRAP_PROP - TP 1 - e0c: , e18: , e1c: 001e01b8, e20: 1100, e24: 0003 May 13 12:01:32 Gilli-Desk kernel: [1213168.353734] nouveau :02:00.0: gr: 0020 [] ch 4 [000f945000 compiz[2374]] subc 3 class 8297 mthd 1b0c data 1000f010 May 13 12:01:32 Gilli-Desk kernel: [1213168.353746] nouveau :02:00.0: fb: trapped write at 004c655700 on channel 4 [0f945000 compiz[2374]] engine 00 [PGRAPH] client 0b [PROP] subclient 00 [RT0] reason 0002 [PAGE_NOT_PRESENT] ... May 13 12:01:50 Gilli-Desk kernel: [1213186.038077] nouveau :02:00.0: gr: magic set 1: May 13 12:01:50 Gilli-Desk kernel: [1213186.038083] nouveau :02:00.0: gr: 00409904: 20082c0a May 13 12:01:50 Gilli-Desk kernel: [1213186.038086] nouveau :02:00.0: gr: 00409908: 004523bc May 13 12:01:50 Gilli-Desk kernel: [1213186.038090] nouveau :02:00.0: gr: 0040990c: 4430 May 13 12:01:50 Gilli-Desk kernel: [1213186.038094] nouveau :02:00.0: gr: 00409910: c500 May 13 12:01:50 Gilli-Desk kernel: [1213186.038098] nouveau :02:00.0: gr: TRAP_TEXTURE - TP1: 0003 [ FAULT] May 13 12:01:50 Gilli-Desk kernel: [1213186.038104] nouveau :02:00.0: gr: 0020 [] ch 4 [000f945000 compiz[2374]] subc 3 class 8297 mthd 1b0c data 1000f010 May 13 12:01:50 Gilli-Desk kernel: [1213186.038115] nouveau :02:00.0: fb: trapped write at 0054294500 on channel 4 [0f945000 compiz[2374]] engine 00 [PGRAPH] client 0b [PROP] subclient 00 [RT0] reason 0002 [PAGE_NOT_PRESENT] 1. lsb_release -rd Description:Ubuntu 16.04.5 LTS Release:16.04 2. driver version: modinfo nouveau filename: /lib/modules/4.4.0-135-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko license:GPL and additional rights description:nVidia Riva/TNT/GeForce/Quadro/Tesla author: Nouveau Project srcversion: 19664B0B91875571D18F94A alias: pci:v12D2d*sv*sd*bc03sc*i* alias: pci:v10DEd*sv*sd*bc03sc*i* depends:drm,drm_kms_helper,ttm,mxm-wmi,wmi,video,i2c-algo-bit retpoline: Y intree: Y vermagic: 4.4.0-135-generic SMP mod_unload modversions retpoline parm: tv_norm:Default TV norm. Supported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J, hd480i, hd480p, hd576i, hd576p, hd720p, hd1080i. Default: PAL *NOTE* Ignored for cards with external TV encoders. (charp) parm: vram_pushbuf:Create DMA push buffers in VRAM (int) parm: nofbaccel:Disable fbcon acceleration (int) parm: tv_disable:Disable TV-out detection (int) parm: ignorelid:Ignore ACPI lid status (int) parm: duallink:Allow dual-link TMDS (default: enabled) (int) parm: pstate:enable sysfs pstate file, which will be moved in the future (int) parm: config:option string to pass to driver core (charp) parm: debug:debug string to pass to driver core (charp) parm: noaccel:disable kernel/abi16 acceleration (int) parm: modeset:enable driver (default: auto, 0 = disabled, 1 = enabled, 2 = headless) (int) parm: runpm:disable (0), force enable (1), optimus only default (-1) (int) 3. expect to launch the ubuntu search when clicked on ubuntu search menu or button. 4. threw garbled display instead. ** Affects: linux-hwe-edge (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu
[Bug 1819268] [NEW] package unattended-upgrades 0.90ubuntu0.10 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: Hi Team, I'm facing system error as soon as I Login.Seems like i have replaced a file while upgrading . Thanks, Chandra ProblemType: Package DistroRelease: Ubuntu 16.04 Package: unattended-upgrades 0.90ubuntu0.10 ProcVersionSignature: Ubuntu 4.4.0-142.168-generic 4.4.167 Uname: Linux 4.4.0-142-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.18 Architecture: amd64 Date: Thu Mar 7 21:49:37 2019 DuplicateSignature: package:unattended-upgrades:0.90ubuntu0.10 Installing new version of config file /etc/logrotate.d/unattended-upgrades ... frontend: Fatal IO error 11 (Resource temporarily unavailable) on X server :0. dpkg: error processing package unattended-upgrades (--configure): subprocess installed post-installation script returned error exit status 1 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationDate: Installed on 2015-08-02 (1314 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) PackageArchitecture: all RelatedPackageVersions: dpkg 1.18.4ubuntu1.5 apt 1.2.29ubuntu0.1 SourcePackage: unattended-upgrades Title: package unattended-upgrades 0.90ubuntu0.10 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: Upgraded to xenial on 2019-03-07 (2 days ago) modified.conffile..etc.apt.apt.conf.d.10periodic: APT::Periodic::Update-Package-Lists "1"; APT::Periodic::Download-Upgradeable-Packages "0"; APT::Periodic::AutocleanInterval "0"; APT::Periodic::Unattended-Upgrade "0"; mtime.conffile..etc.apt.apt.conf.d.10periodic: 2019-02-17T17:53:07.538650 ** Affects: unattended-upgrades (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1819268 Title: package unattended-upgrades 0.90ubuntu0.10 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unattended-upgrades/+bug/1819268/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791076] [NEW] marker line not found in /etc/courier/authmysqlrc (probably forgot to run sysconftool after an upgrade)
Public bug reported: Authentication FAILED: Operation not permitted ** Affects: courier-authlib (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791076 Title: marker line not found in /etc/courier/authmysqlrc (probably forgot to run sysconftool after an upgrade) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/courier-authlib/+bug/1791076/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1773079] Re: update-manager crashed with apt_pkg.Error in _open_cache(): E:The repository 'http://ppa.launchpad.net/deadsnakes/ppa/ubuntu cosmic Release' does not have a Release file.
*** This bug is a duplicate of bug 1694054 *** https://bugs.launchpad.net/bugs/1694054 ** Changed in: update-manager (Ubuntu) Assignee: (unassigned) => Shamvu Chandra (shamvu+) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1773079 Title: update-manager crashed with apt_pkg.Error in _open_cache(): E:The repository 'http://ppa.launchpad.net/deadsnakes/ppa/ubuntu cosmic Release' does not have a Release file. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/update-manager/+bug/1773079/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1770327] [NEW] package python3 3.5.1-3 failed to install/upgrade: subprocess installed pre-removal script returned error exit status 127
Public bug reported: I couldn't access ubuntu desktop. ProblemType: Package DistroRelease: Ubuntu 16.04 Package: python3 3.5.1-3 ProcVersionSignature: Ubuntu 4.13.0-41.46~16.04.1-generic 4.13.16 Uname: Linux 4.13.0-41-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.16 Architecture: amd64 Date: Wed May 9 11:52:20 2018 DuplicateSignature: package:python3:3.5.1-3 Removing python3 (3.5.1-3) ... /var/lib/dpkg/info/python3.prerm: 5: /var/lib/dpkg/info/python3.prerm: py3clean: not found dpkg: error processing package python3 (--purge): subprocess installed pre-removal script returned error exit status 127 ErrorMessage: subprocess installed pre-removal script returned error exit status 127 InstallationDate: Installed on 2018-02-27 (71 days ago) InstallationMedia: Ubuntu 16.04.3 LTS "Xenial Xerus" - Release amd64 (20170801) RelatedPackageVersions: dpkg 1.18.4ubuntu1.4 apt 1.2.26 SourcePackage: python3-defaults Title: package python3 3.5.1-3 failed to install/upgrade: subprocess installed pre-removal script returned error exit status 127 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: python3-defaults (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1770327 Title: package python3 3.5.1-3 failed to install/upgrade: subprocess installed pre-removal script returned error exit status 127 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/python3-defaults/+bug/1770327/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1769419] [NEW] grub2 installation failed
Public bug reported: installed system cannot boot ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CasperVersion: 1.394 CurrentDesktop: ubuntu:GNOME Date: Sun May 6 08:13:28 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_IN PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IN LC_NUMERIC=C.UTF-8 SourcePackage: grub-installer UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: grub-installer (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic ubiquity-18.04.14 ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1769419 Title: grub2 installation failed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub-installer/+bug/1769419/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1757001] [NEW] While installing ubuntu alongside windows 10, it says ubi-partman failed and discontinued. Still i haven't installed ubuntu yet
Public bug reported: I couldn't retrieve the file you asked, i still haven't installed ubuntu yet. While installing itself it says ubi-partman failed with the exit code 141. and discontinued from the installation. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubiquity 2.21.63.6 ProcVersionSignature: Ubuntu 4.13.0-36.40~16.04.1-generic 4.13.13 Uname: Linux 4.13.0-36-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.15 Architecture: amd64 CasperVersion: 1.376.2 Date: Mon Mar 19 20:30:19 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed cdrom-detect/try-usb=true noprompt floppy.allowed_drive_mask=0 ignore_uuid boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Ubuntu 16.04.4 LTS "Xenial Xerus" - Release amd64 (20180228) ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug ubiquity-2.21.63.6 ubuntu xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1757001 Title: While installing ubuntu alongside windows 10, it says ubi-partman failed and discontinued. Still i haven't installed ubuntu yet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1757001/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1518408] Re: Interrupt audio on bluetooth headset when wifi is on
Any progress or any alternate solutions for this issue? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1518408 Title: Interrupt audio on bluetooth headset when wifi is on To manage notifications about this bug go to: https://bugs.launchpad.net/broadcom-sta/+bug/1518408/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1740603] Re: Xorg freeze
i do not launch terminal. i acceses teminal but iam fail mainy time to launch terminal. what i do to solve this problem. ** Changed in: xorg (Ubuntu) Status: New => Invalid ** Converted to question: https://answers.launchpad.net/ubuntu/+source/xorg/+question/662396 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1740603 Title: Xorg freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1740603/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1740603] [NEW] Xorg freeze
Public bug reported: terminal do not launched. itried to launch terminal bat iam fail to launch terminal ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.13.0-137.186-generic 3.13.11-ckt39 Uname: Linux 3.13.0-137-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.27 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Sat Dec 30 20:04:16 2017 DistUpgraded: Fresh install DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-trusty-amd64-20140620-0 DistroCodename: trusty DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:06f0] InstallationDate: Installed on 2017-02-14 (319 days ago) InstallationMedia: Ubuntu 14.04 "Trusty" - Build amd64 LIVE Binary 20140620-04:25 MachineType: Dell Inc. Latitude 3460 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-137-generic.efi.signed root=UUID=34b519c8-589f-4043-b001-a8ab0820892e ro locale=en_IN quiet splash pcie_aspm=force radeon.modeset=0 nouveau.modeset=0 video.use_native_backlight=1 vt.handoff=7 SourcePackage: xorg Symptom: display Title: Xorg freeze UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/19/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A03 dmi.board.name: 0XPKP0 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA03:bd01/19/2016:svnDellInc.:pnLatitude3460:pvr:rvnDellInc.:rn0XPKP0:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude 3460 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.11.3+14.04.20160425-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.67-1ubuntu0.14.04.2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.6 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.6 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.11 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.7 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Sat Dec 30 18:16:22 2017 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id1201 vendor LGD xserver.version: 2:1.15.1-0ubuntu2.11 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 false-gpu-hang freeze trusty ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1740603 Title: Xorg freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1740603/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1739647] [NEW] installation problem due to connection failure
Public bug reported: while downloading due to connection problem it got failed and asked all bugs will be reported and assested they told ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: ubiquity 16.10.14 ProcVersionSignature: Ubuntu 4.8.0-22.24-generic 4.8.0 Uname: Linux 4.8.0-22-generic x86_64 ApportVersion: 2.20.3-0ubuntu8 Architecture: amd64 CasperVersion: 1.379 Date: Thu Dec 21 22:51:33 2017 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) ProcEnviron: LANGUAGE=en_IN PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IN LC_NUMERIC=C.UTF-8 SourcePackage: grub-installer UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: grub-installer (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug ubiquity-16.10.14 ubuntu yakkety -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1739647 Title: installation problem due to connection failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub-installer/+bug/1739647/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1727690] [NEW] package liblouis-data 2.6.4-2ubuntu0.1 failed to install/upgrade: package liblouis-data is not ready for configuration cannot configure (current status 'half-installed')
Public bug reported: . ProblemType: Package DistroRelease: Ubuntu 16.04 Package: liblouis-data 2.6.4-2ubuntu0.1 ProcVersionSignature: Ubuntu 4.10.0-28.32~16.04.2-generic 4.10.17 Uname: Linux 4.10.0-28-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 Date: Thu Oct 26 15:59:15 2017 Dependencies: DuplicateSignature: package:liblouis-data:2.6.4-2ubuntu0.1 Processing triggers for libc-bin (2.23-0ubuntu9) ... dpkg: error processing package liblouis-data (--configure): package liblouis-data is not ready for configuration ErrorMessage: package liblouis-data is not ready for configuration cannot configure (current status 'half-installed') InstallationDate: Installed on 2017-10-26 (0 days ago) InstallationMedia: Ubuntu 16.04.3 LTS "Xenial Xerus" - Release amd64 (20170801) PackageArchitecture: all RelatedPackageVersions: dpkg 1.18.4ubuntu1.2 apt 1.2.24 SourcePackage: liblouis Title: package liblouis-data 2.6.4-2ubuntu0.1 failed to install/upgrade: package liblouis-data is not ready for configuration cannot configure (current status 'half-installed') UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: liblouis (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1727690 Title: package liblouis-data 2.6.4-2ubuntu0.1 failed to install/upgrade: package liblouis-data is not ready for configuration cannot configure (current status 'half-installed') To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/liblouis/+bug/1727690/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1708852] Re: Touchpad not detected
my touchpad didnt work -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1708852 Title: Touchpad not detected To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1708852/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1666774] [NEW] when I am installing the UBUNTU 16.04, just a few moments before to finish, it suddenly said that the installer has crashed.
Public bug reported: ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubiquity 2.21.63.2 ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 Uname: Linux 4.4.0-31-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CasperVersion: 1.376 Date: Wed Feb 22 11:46:59 2017 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --- LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) ProcEnviron: LANGUAGE=en_IN PATH=(custom, no user) LANG=en_IN SHELL=/bin/bash SourcePackage: grub-installer UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: grub-installer (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug ubiquity-2.21.63.2 ubuntu xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1666774 Title: when I am installing the UBUNTU 16.04, just a few moments before to finish, it suddenly said that the installer has crashed. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub-installer/+bug/1666774/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1385930] Re: 14.10 dual boot Win 7 64-bit - cannot install with Wubi
** Changed in: debian-installer (Ubuntu) Status: Confirmed => Fix Committed ** Changed in: debian-installer (Ubuntu) Assignee: (unassigned) => ravi chandra (kravivar) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1385930 Title: 14.10 dual boot Win 7 64-bit - cannot install with Wubi To manage notifications about this bug go to: https://bugs.launchpad.net/wubi/+bug/1385930/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1567417] Re: WARN_ON(!wm_changed) skl_update_other_pipe_wm+0x16c/0x180 [i915_bpo]
Happened on 4.2.0-35-generic #40-Ubuntu SMP x86_64 x86_64 x86_64 GNU/Linux Apr 29 11:49:47 MyLap thermald[690]: Set : threshold:9, temperature:9, cdev:9(rapl_controller), curr_state:50, max_state:1500 Apr 29 11:49:49 MyLap kernel: [ 108.430293] [ cut here ] Apr 29 11:49:49 MyLap kernel: [ 108.430317] WARNING: CPU: 0 PID: 814 at /build/linux-HVWSXI/linux-4.2.0/drivers/gpu/drm/i915/intel_pm.c:3404 skl_update_other_ipe_wm+0x1de/0x1f0 [i915]() Apr 29 11:49:49 MyLap kernel: [ 108.430319] WARN_ON(!wm_changed) Apr 29 11:49:49 MyLap kernel: [ 108.430321] Modules linked in: drbg ansi_cprng ctr ccm rfcomm bnep binfmt_misc snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic btusb btrtl uvcvideo btbcm videobuf2_vmalloc btintel videobuf2_memops videobuf2_core hid_multitouch bluetooth v4l2_common videodev joydev media arc4 i2c_designware_platform i2c_designware_core asus_nb_wmi asus_wmi sparse_keymap intel_rapl nls_iso8859_1 snd_hda_intel x86_pkg_temp_thermal intel_powerclamp snd_hda_codec coretemp snd_hda_core kvm_intel snd_hwdep snd_pcm kvm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul crc32_pclmul iwlmvm aesni_intel snd_seq mac80211 aes_x86_64 snd_seq_device lrw gf128mul snd_timer glue_helper ablk_helper cryptd snd iwlwifi input_leds serio_raw soundcore cfg80211 mei_me idma64 virt_dma mei intel_lpss_pci processor_thermal_device intel_soc_dts_iosf shpchp int3403_thermal intel_lpss_acpi intel_lpss int3402_thermal int340x_thermal_zone int3400_thermal tpm_crb acpi_therma l_rel acpi_pad mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid psmouse nouveau i915 mxm_wmi ttm i2c_algo_bit nvme drm_kms_helper ahci drm libahci i2c_hid hid wmi pinctrl_sunrisepoint video pinctrl_intel Apr 29 11:49:49 MyLap kernel: [ 108.430374] CPU: 0 PID: 814 Comm: Xorg Tainted: GW 4.2.0-35-generic #40-Ubuntu Apr 29 11:49:49 MyLap kernel: [ 108.430376] Hardware name: ASUSTeK COMPUTER INC. N501VW/N501VW, BIOS N501VW.203 10/28/2015 Apr 29 11:49:49 MyLap kernel: [ 108.430378] 0286 3c0c4883 8804a9173518 817f1d7e Apr 29 11:49:49 MyLap kernel: [ 108.430380] 8804a9173570 c0230680 8804a9173558 8107cb46 Apr 29 11:49:49 MyLap kernel: [ 108.430382] 8804a9173620 8804a91736c4 8804b0f9b000 8804b0f9a000 Apr 29 11:49:49 MyLap kernel: [ 108.430384] Call Trace: Apr 29 11:49:49 MyLap kernel: [ 108.430392] [] dump_stack+0x63/0x81 Apr 29 11:49:49 MyLap kernel: [ 108.430396] [] warn_slowpath_common+0x86/0xc0 Apr 29 11:49:49 MyLap kernel: [ 108.430398] [] warn_slowpath_fmt+0x55/0x70 Apr 29 11:49:49 MyLap kernel: [ 108.430417] [] skl_update_other_pipe_wm+0x1de/0x1f0 [i915] Apr 29 11:49:49 MyLap kernel: [ 108.430430] [] skl_update_wm+0x1bb/0x740 [i915] Apr 29 11:49:49 MyLap kernel: [ 108.430434] [] ? timerqueue_del+0x24/0x70 Apr 29 11:49:49 MyLap kernel: [ 108.430437] [] ? __remove_hrtimer+0x3c/0x90 Apr 29 11:49:49 MyLap kernel: [ 108.430439] [] ? hrtimer_try_to_cancel+0xd1/0x130 Apr 29 11:49:49 MyLap kernel: [ 108.430452] [] intel_update_watermarks+0x1e/0x30 [i915] Apr 29 11:49:49 MyLap kernel: [ 108.430471] [] intel_finish_crtc_commit+0x169/0x190 [i915] Apr 29 11:49:49 MyLap kernel: [ 108.430478] [] drm_atomic_helper_commit_planes_on_crtc+0x143/0x260 [drm_kms_helper] Apr 29 11:49:49 MyLap kernel: [ 108.430496] [] intel_atomic_commit+0x6b/0x100 [i915] Apr 29 11:49:49 MyLap kernel: [ 108.430531] [] drm_atomic_commit+0x37/0x60 [drm] Apr 29 11:49:49 MyLap kernel: [ 108.430536] [] drm_atomic_helper_disable_plane+0xef/0x130 [drm_kms_helper] Apr 29 11:49:49 MyLap kernel: [ 108.430539] [] ? skb_release_data+0xab/0xe0 Apr 29 11:49:49 MyLap kernel: [ 108.430551] [] __setplane_internal+0x23a/0x2f0 [drm] Apr 29 11:49:49 MyLap kernel: [ 108.430561] [] drm_mode_cursor_universal+0x12b/0x210 [drm] Apr 29 11:49:49 MyLap kernel: [ 108.430563] [] ? __ww_mutex_lock+0x5f/0xa0 Apr 29 11:49:49 MyLap kernel: [ 108.430572] [] drm_mode_cursor_common+0x81/0x180 [drm] Apr 29 11:49:49 MyLap kernel: [ 108.430583] [] drm_mode_cursor_ioctl+0x50/0x70 [drm] Apr 29 11:49:49 MyLap kernel: [ 108.430592] [] drm_ioctl+0x125/0x610 [drm] Apr 29 11:49:49 MyLap kernel: [ 108.430601] [] ? drm_mode_setcrtc+0x500/0x500 [drm] Apr 29 11:49:49 MyLap kernel: [ 108.430604] [] ? timerqueue_add+0x59/0xb0 Apr 29 11:49:49 MyLap kernel: [ 108.430607] [] ? enqueue_hrtimer+0x41/0x90 Apr 29 11:49:49 MyLap kernel: [ 108.430609] [] ? hrtimer_start_range_ns+0x1cd/0x3d0 Apr 29 11:49:49 MyLap kernel: [ 108.430612] [] do_vfs_ioctl+0x295/0x480 Apr 29 11:49:49 MyLap kernel: [ 108.430614] [] ? __set_task_blocked+0x41/0xa0 Apr 29 11:49:49 MyLap kernel: [ 108.430616] [] SyS_ioctl+0x79/0x90 Apr 29 11:49:49 MyLap kernel: [ 108.430619] [] ? SyS_rt_sigprocmask+0x8e/0xc0 Apr 29 11:49:49 MyLap kernel: [ 108.430622] [] entry_SYSCALL_64_fastpath+0x16/0x75 Apr
[Bug 1574055] [NEW] apt-get install grubefi-amd64-signed failed when installing from live USB using Xubuntu16.04-amd64.iso
Public bug reported: apt-get install grubefi-amd64-signed failed when installing from live USB using Xubuntu16.04-amd64.iso ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubiquity 2.21.63 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CasperVersion: 1.376 Date: Sat Apr 23 21:58:45 2016 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/xubuntu.seed boot=casper quiet splash --- LiveMediaBuild: Xubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) ProcEnviron: LANGUAGE=en_IN PATH=(custom, no user) LANG=en_IN SHELL=/bin/bash SourcePackage: grub-installer UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: grub-installer (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug ubiquity-2.21.63 xenial xubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1574055 Title: apt-get install grubefi-amd64-signed failed when installing from live USB using Xubuntu16.04-amd64.iso To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub-installer/+bug/1574055/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1496324] [NEW] virtualbox-guest-dkms 4.3.10-dfsg-1ubuntu5: virtualbox-guest kernel module failed to build
Public bug reported: VBoxClient stopped working on start-up in Ubuntu guest OS in VM ProblemType: Package DistroRelease: Ubuntu 14.04 Package: virtualbox-guest-dkms 4.3.10-dfsg-1ubuntu5 ProcVersionSignature: Ubuntu 3.19.0-28.30~14.04.1-generic 3.19.8-ckt5 Uname: Linux 3.19.0-28-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.13 Architecture: amd64 DKMSKernelVersion: 3.19.0-28-generic Date: Tue Sep 15 09:45:54 2015 DuplicateSignature: dkms:virtualbox-guest-dkms:4.3.10-dfsg-1ubuntu5:/var/lib/dkms/virtualbox-guest/4.3.10/build/vboxsf/dirops.c:129:29: error: 'struct file' has no member named 'f_dentry' InstallationDate: Installed on 2015-09-02 (14 days ago) InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805) PackageArchitecture: all PackageVersion: 4.3.10-dfsg-1ubuntu5 RelatedPackageVersions: dpkg 1.17.5ubuntu5.4 apt 1.0.1ubuntu2.10 SourcePackage: virtualbox Title: virtualbox-guest-dkms 4.3.10-dfsg-1ubuntu5: virtualbox-guest kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: virtualbox (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package trusty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1496324 Title: virtualbox-guest-dkms 4.3.10-dfsg-1ubuntu5: virtualbox-guest kernel module failed to build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/virtualbox/+bug/1496324/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 906685] Fwd: [3]
[Watch this news release](http://186.148.231.158/?wuqwdqe=BGN2Awt1DTW1M3ZhoTS1ozAbpTSxYz5yqN%3D%3Dsb=caf7373118fc5cf902f54ce1e8a69a06xbk=173957jgl=3.6.5693do=6) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/906685 Title: Cursor won't move on the text, and won't shoe all the pages when dragged To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/906685/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1307648] Re: chromium 34 from proposed does not take input from keyboard in first entry point on several webpages
OK. I have installed the chromium-broswer beta using sudo apt-add-repository ppa:saiarcot895/chromium-beta and installed Chromium 37. I can confirm that the problem then disappears. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1307648 Title: chromium 34 from proposed does not take input from keyboard in first entry point on several webpages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1307648/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1307648] Re: chromium 34 from proposed does not take input from keyboard in first entry point on several webpages
+1 from me for Version 34.0.1847.116 Ubuntu 14.04 aura (260972). Killing ibus solves the problem. Which ppa should I use if I wanted Chromium 35? Thanks. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1307648 Title: chromium 34 from proposed does not take input from keyboard in first entry point on several webpages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1307648/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1313471] [NEW] package python3.3-minimal 3.3.2-7ubuntu3 failed to install/upgrade: cannot copy extracted data for './usr/bin/python3.3m' to '/usr/bin/python3.3m.dpkg-new': unexpected end of file
Public bug reported: package python3.3-minimal 3.3.2-7ubuntu3 failed to install/upgrade: cannot copy extracted data for './usr/bin/python3.3m' to '/usr/bin/python3.3m.dpkg-new': unexpected end of file or stream ProblemType: Package DistroRelease: Ubuntu 13.10 Package: python3.3-minimal 3.3.2-7ubuntu3 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic i686 ApportVersion: 2.12.5-0ubuntu2 Architecture: i386 Date: Mon Apr 28 07:51:40 2014 DuplicateSignature: package:python3.3-minimal:3.3.2-7ubuntu3:cannot copy extracted data for './usr/bin/python3.3m' to '/usr/bin/python3.3m.dpkg-new': unexpected end of file or stream ErrorMessage: cannot copy extracted data for './usr/bin/python3.3m' to '/usr/bin/python3.3m.dpkg-new': unexpected end of file or stream InstallationDate: Installed on 2014-04-27 (0 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release i386 (20131016.1) MarkForUpload: True SourcePackage: python3.3 Title: package python3.3-minimal 3.3.2-7ubuntu3 failed to install/upgrade: cannot copy extracted data for './usr/bin/python3.3m' to '/usr/bin/python3.3m.dpkg-new': unexpected end of file or stream UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: python3.3 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 saucy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1313471 Title: package python3.3-minimal 3.3.2-7ubuntu3 failed to install/upgrade: cannot copy extracted data for './usr/bin/python3.3m' to '/usr/bin/python3.3m.dpkg-new': unexpected end of file or stream To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/python3.3/+bug/1313471/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1256591]
The end of dmesg gives [22116.317942] usb 2-4: new high-speed USB device number 5 using ehci-pci [22116.454299] usb 2-4: New USB device found, idVendor=04cb, idProduct=023e [22116.454312] usb 2-4: New USB device strings: Mfr=0, Product=2, SerialNumber=3 [22116.454319] usb 2-4: Product: USB PTP ls -l /dev/bus/usb/002/005 gives crw-rw-r--+ 1 root plugdev 189, 132 02-01-2014 23:27 /dev/bus/usb/002/005 and getfacl /dev/bus/usb/002/005 gives getfacl: Removing leading '/' from absolute path names # file: dev/bus/usb/002/005 # owner: root # group: plugdev user::rw- user:chandra:rw- group::rw- mask::rw- other::r-- -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1256591 Title: The system is unable to read from a PTP camera. To manage notifications about this bug go to: https://bugs.launchpad.net/digikam/+bug/1256591/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1256591]
On Kubuntu 13.10/KDE 4.11.3 with a Fuji Finepix AX 300 and the reported problems, here is what I get: solid-hardware query Camera.supportedDrivers == 'gphoto' gives Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath) Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath) udi = '/org/kde/solid/udev/sys/devices/pci:00/:00:13.2/usb2/2-4' Because this does not have a Block.device line, what else should I do? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1256591 Title: The system is unable to read from a PTP camera. To manage notifications about this bug go to: https://bugs.launchpad.net/digikam/+bug/1256591/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1256591]
*** This bug has been confirmed by popular vote. *** -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1256591 Title: The system is unable to read from a PTP camera. To manage notifications about this bug go to: https://bugs.launchpad.net/digikam/+bug/1256591/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1235856] [NEW] open-vm-dkms 2011.12.20-562307-0ubuntu1: open-vm-tools kernel module failed to build
Public bug reported: Open VM Tools fails to build ProblemType: Package DistroRelease: Ubuntu 12.04 Package: open-vm-dkms 2011.12.20-562307-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5 Uname: Linux 3.8.0-29-generic i686 ApportVersion: 2.0.1-0ubuntu17.5 Architecture: i386 DKMSKernelVersion: 3.8.0-31-generic Date: Sat Oct 5 21:57:01 2013 InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release i386 (20130820.1) MarkForUpload: True PackageArchitecture: all PackageVersion: 2011.12.20-562307-0ubuntu1 SourcePackage: open-vm-tools Title: open-vm-dkms 2011.12.20-562307-0ubuntu1: open-vm-tools kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: open-vm-tools (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 precise -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to open-vm-tools in Ubuntu. https://bugs.launchpad.net/bugs/1235856 Title: open-vm-dkms 2011.12.20-562307-0ubuntu1: open-vm-tools kernel module failed to build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/open-vm-tools/+bug/1235856/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1235856] [NEW] open-vm-dkms 2011.12.20-562307-0ubuntu1: open-vm-tools kernel module failed to build
Public bug reported: Open VM Tools fails to build ProblemType: Package DistroRelease: Ubuntu 12.04 Package: open-vm-dkms 2011.12.20-562307-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5 Uname: Linux 3.8.0-29-generic i686 ApportVersion: 2.0.1-0ubuntu17.5 Architecture: i386 DKMSKernelVersion: 3.8.0-31-generic Date: Sat Oct 5 21:57:01 2013 InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release i386 (20130820.1) MarkForUpload: True PackageArchitecture: all PackageVersion: 2011.12.20-562307-0ubuntu1 SourcePackage: open-vm-tools Title: open-vm-dkms 2011.12.20-562307-0ubuntu1: open-vm-tools kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: open-vm-tools (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 precise -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1235856 Title: open-vm-dkms 2011.12.20-562307-0ubuntu1: open-vm-tools kernel module failed to build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/open-vm-tools/+bug/1235856/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 232260] Re: Installing luatex causes bugs in texdoc
I am amazed to get this message five years after the original report. You people must get a medal for tenacity :-) Nothing else from me. Please close the bug. Chandra 20 Jun 2013 On 06/16/2013 12:37 AM, Daniel Karlsson wrote: Thank you for reporting this bug to Ubuntu. Hardy Heron reached EOL on May 12, 2011. See this document for currently supported Ubuntu releases: https://wiki.ubuntu.com/Releases I've tried recreating this bug with Raring Ringtail and was unable to, given the information you've provided. Please upgrade to the latest version and re-test. If the bug is still reproducible, increase the verbosity of the steps to recreate it so we can try again. Do feel free to report any other bugs you may find. ** Changed in: luatex (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/232260 Title: Installing luatex causes bugs in texdoc To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/luatex/+bug/232260/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 596476] Re: kdiff3 empty printout to PDF
In case anyone is interested, I was able to workaround this problem. I had to build kdiff3 from source after making a small change. YMMV, since I have not done extensive testing, nor have I done any checks to see what sort of side-effects my code change may have. Here's what I did: 1. Download kdiff3 source tarball. (kdiff3-0.9.97.tar.gz) 2. tar xvzf kdiff3-0.9.97.tar.gz 3. cd kdiff3-0.9.97/src-QT4 4. Open file kdiff3.cpp 5. Change line number 869 from: #ifdef KREPLACEMENTS_H to: #ifndef KREPLACEMENTS_H 6. Follow the directions in the README file under the kdiff3-0.9.97 directory (the section under Requirements Installation) to build kdiff3. 7. The newly built kdiff3 will print to pdf as one would expect. Let me know if you are able to get this to work. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/596476 Title: kdiff3 empty printout to PDF To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/kdiff3/+bug/596476/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 596476] Re: kdiff3 empty printout to PDF
I see that Joachim is on the notify list - so he is likely to look at the workaround posted and perhaps will comment. :-) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/596476 Title: kdiff3 empty printout to PDF To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/kdiff3/+bug/596476/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 970139] Re: apt_check.py crashed with SIGSEGV in pkgPolicy::GetCandidateVer()
I have experienced this bug and it has resulted in the following consequences on my Kubuntu 12.04 amd64 system: 1. Inability to update or upgrade with apt-get update apt-get upgrade See example below for error message. 2. Error when trying to install or reinstall any existing package. For instance sudo apt-get install --reinstall update-notifier-common gives --- Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/222 kB of archives. After this operation, 0 B of additional disk space will be used. Use of uninitialized value $item in hash element at /usr/share/perl5/Debconf/DbDriver/File.pm line 82, $__ANONIO__ chunk 29. (Reading database ... 65%dpkg: unrecoverable fatal error, aborting: files list file for package 'libhal1' is missing final newline E: Sub-process /usr/bin/dpkg returned an error code (2) --- For the record, I was told during some upgrade that libhal1 was not needed and could be removed by sudo apt-get autoremove and the above error must have resulted from that operation. 3. The system runs but is flaky. 4. I have a new system disk that is less than three months old and is unlikely to be the cause of the above problems. 5. It appears that I need to re-install my system (sigh). If there is any workaround, I will appreciate knowing about it. Thank.s -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/970139 Title: apt_check.py crashed with SIGSEGV in pkgPolicy::GetCandidateVer() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/update-notifier/+bug/970139/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 970139] Re: apt_check.py crashed with SIGSEGV in pkgPolicy::GetCandidateVer()
Is this connected to https://bugs.launchpad.net/ubuntu/+source/update-notifier/+bug/1016040 by any chance? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/970139 Title: apt_check.py crashed with SIGSEGV in pkgPolicy::GetCandidateVer() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/update-notifier/+bug/970139/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 970139] Re: apt_check.py crashed with SIGSEGV in pkgPolicy::GetCandidateVer()
And to https://bugs.launchpad.net/ubuntu/+source/update-notifier/+bug/1024599 as well? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/970139 Title: apt_check.py crashed with SIGSEGV in pkgPolicy::GetCandidateVer() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/update-notifier/+bug/970139/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1005649] Re: bluetooth software not working on Linux Mint 13 MATE
Hi, I am having a 32 bit installation of Mate 13 Maya. Having same problem. Options dialog does not open on clicking the bluetooth icon in tray. But as suggested things work from command line, and I am able to connect to devices and internet with this temporary solution. I am waiting for this bug to close. Please let me know, if I can help. Please get me the source, I will give a try. Thanks Ganesh -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1005649 Title: bluetooth software not working on Linux Mint 13 MATE To manage notifications about this bug go to: https://bugs.launchpad.net/linuxmint/+bug/1005649/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012167] Re: Version of PDFSam in the repository is incredibly old
+1 from me. I have followed the instructions at: http://ubuntuforums.org/showpost.php?p=9109328postcount=5 but would prefer not to have a workaround. Thanks. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012167 Title: Version of PDFSam in the repository is incredibly old To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pdfsam/+bug/1012167/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1000483] [NEW] installer crashed
Public bug reported: At the last moment of finishing installation, installer crashed giving messages to report thr bug. I have attached syslog and partman file in attachment as a bug.rar archive file. ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1000483 Title: installer crashed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1000483/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1000483] Re: installer crashed
** Attachment added: syslog and partman files as attachment in bug.rar https://bugs.launchpad.net/bugs/1000483/+attachment/3149758/+files/bug.rar -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1000483 Title: installer crashed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1000483/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 915235] Re: muon-installer crash
Following up on my report https://bugs.launchpad.net/ubuntu/+source/muon/+bug/915235/comments/12 I re-installed Kubuntu 12.04 from the alternate CD and can now report that the problem is no more. Perhaps the first installation was corrupted in some way that is not reproducible. Sorry for the false alarm. -- You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to muon in Ubuntu. https://bugs.launchpad.net/bugs/915235 Title: muon-installer crash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/muon/+bug/915235/+subscriptions -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 915235] Re: muon-installer crash
I am on fresh install of Kubuntu 12.04 on AMD64. Muon stoppedworking after an upgrade and when I do `apt-get install --reinstall muon` I get this error ** Reading en translations from /var/lib/apt/lists/ubuntuarchive.hnsdc.com_ubuntu_dists_precise_restricted_i18n_Translation-en: done. Traceback (most recent call last): File /usr/sbin/update-apt-xapian-index, line 106, in module indexer.incrementalUpdate() File /usr/lib/python2.7/dist-packages/axi/indexer.py, line 683, in incrementalUpdate self.updateIndex(dbpath) File /usr/lib/python2.7/dist-packages/axi/indexer.py, line 633, in updateIndex db = xapian.WritableDatabase(pathname, xapian.DB_CREATE_OR_OPEN) File /usr/lib/python2.7/dist-packages/xapian/__init__.py, line 4298, in __init__ _xapian.WritableDatabase_swiginit(self,_xapian.new_WritableDatabase(*args)) xapian.DatabaseCorruptError: Cannot open tables at consistent revisions * Can someone tell me how to get the functionality of muon back again please? Thanks. -- You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to muon in Ubuntu. https://bugs.launchpad.net/bugs/915235 Title: muon-installer crash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/muon/+bug/915235/+subscriptions -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 880876] Re: Unity causes ibus to not work correctly (spaces incorrectly placed)
Hi Friends, I am a 11.10 user, and I am no techie but a lay person and an ardent campaigner of open source free soft ware, earlier I was using the 11.04 and the IBUS+Itrans(m17n) was fine , but now it is irritating that the Kannada fonts that are very crucial for to write articles as I am a language Journalist. I have the same problem of unnecessary and unwanted space in between the letters while typing Kannada words. Example: ಅನಿವ ರ್ I have typed Aniver but in Kannada it has come out as Anive r, the space is unwanted. I need urgent solution. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/880876 Title: Unity causes ibus to not work correctly (spaces incorrectly placed) To manage notifications about this bug go to: https://bugs.launchpad.net/ibus/+bug/880876/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 931362] [NEW] http://www.spav.ac.in/ is a website of School of Planning and Architecture but not showing properly
Public bug reported: whenever i open the www.spav.ac.in the site is not showing properly. I do not know is this a bug or not but it is embressing to me. So i intended to report a problem to Firefox Help menu. Any one may open the said site and feal the problem. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: firefox 10.0+build1-0ubuntu0.11.10.1 ProcVersionSignature: Ubuntu 3.0.0-15.26-generic 3.0.13 Uname: Linux 3.0.0-15-generic i686 NonfreeKernelModules: nvidia AddonCompatCheckDisabled: False AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.23-0ubuntu4 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: sadhan 1565 F pulseaudio BuildID: 20120129141551 CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'NVidia'/'HDA NVidia at 0xfe024000 irq 22' Mixer name : 'Realtek ALC662 rev1' Components : 'HDA:10ec0662,15658218,00100101' Controls : 33 Simple ctrls : 20 Channel: release CurrentDmesg: Date: Mon Feb 13 16:07:29 2012 ForcedLayersAccel: False IfupdownConfig: auto lo iface lo inet loopback InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) IpRoute: default via 117.214.0.1 dev ppp0 proto static 117.214.0.1 dev ppp0 proto kernel scope link src 117.214.3.231 169.254.0.0/16 dev ppp0 scope link metric 1000 IwConfig: lono wireless extensions. eth0 no wireless extensions. ppp0 no wireless extensions. PciNetwork: Profiles: Profile0 (Default) - LastVersion=10.0/20120129141551 (Running) RfKill: RunningIncompatibleAddons: False SourcePackage: firefox UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/23/2010 dmi.bios.vendor: Phoenix Technologies, LTD dmi.bios.version: 6.00 PG dmi.board.name: N68SA-M2S dmi.board.vendor: BIOSTAR Group dmi.chassis.type: 3 dmi.chassis.vendor: BIOSTAR Group dmi.chassis.version: N68SA-M2S dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd06/23/2010:svnBIOSTARGroup:pnN68SA-M2S:pvr:rvnBIOSTARGroup:rnN68SA-M2S:rvr:cvnBIOSTARGroup:ct3:cvrN68SA-M2S: dmi.product.name: N68SA-M2S dmi.sys.vendor: BIOSTAR Group ** Affects: firefox (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 oneiric -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/931362 Title: http://www.spav.ac.in/ is a website of School of Planning and Architecture but not showing properly To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/931362/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 931362] Re: http://www.spav.ac.in/ is a website of School of Planning and Architecture but not showing properly
** Attachment added: Screenshot of the site https://bugs.launchpad.net/bugs/931362/+attachment/2735559/+files/Screenshot%20at%202012-02-13%2016%3A24%3A32.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/931362 Title: http://www.spav.ac.in/ is a website of School of Planning and Architecture but not showing properly To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/931362/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 925751] [NEW] Erron on uptating to Pangolin Alpha2
Public bug reported: Can't install 'ubuntu-desktop' It was impossible to install a required package. Please report this as a bug using 'ubuntu-bug update-manager' in a terminal. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: update-manager 1:0.156.2 ProcVersionSignature: Ubuntu 3.2.0-12.21-generic 3.2.2 Uname: Linux 3.2.0-12-generic x86_64 ApportVersion: 1.91-0ubuntu1 Architecture: amd64 Date: Thu Feb 2 22:49:45 2012 GsettingsChanges: com.ubuntu.update-manager first-run false com.ubuntu.update-manager launch-time 1328219324 com.ubuntu.update-manager show-details true com.ubuntu.update-manager window-height 740 com.ubuntu.update-manager window-width 600 InstallationMedia: Ubuntu 10.04.2 LTS Lucid Lynx - Release amd64 (20110211.1) PackageArchitecture: all SourcePackage: update-manager UpgradeStatus: Upgraded to precise on 2012-02-02 (0 days ago) ** Affects: update-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug precise running-unity -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/925751 Title: Erron on uptating to Pangolin Alpha2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/update-manager/+bug/925751/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
