[Bug 98800] Re: xserver-xorg-video-ati broken in Feisty
Attached xorg.conf ** Attachment added: xorg.conf http://librarian.launchpad.net/7059106/xorg.conf -- xserver-xorg-video-ati broken in Feisty https://launchpad.net/bugs/98800 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 98800] Re: xserver-xorg-video-ati broken in Feisty
Attached Xorg.0.log ** Attachment added: Xorg.0.log http://librarian.launchpad.net/7059117/Xorg.0.log -- xserver-xorg-video-ati broken in Feisty https://launchpad.net/bugs/98800 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 98648] Re: [Feisty] [regression] No XV or GLX with i810 on i915GM
Problem with 3/29 updates. I have an Acer Ferrari with ATI Mobility Radeon 7000. My video card no longer works. I tried updating xorg. No luck. I tried adding the following to the conf file; Option MonitorLayout LVDS,AUTO which has worked for the past 8 or so of my installs. No luck. Feisty does run from the command line. I have done apt-get update, apt-get install, and then apt-get upgrade. All updates / upgrades are in place. I'm not very technically proficient, but I'll help if I can. -- [Feisty] [regression] No XV or GLX with i810 on i915GM https://launchpad.net/bugs/98648 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 98651] Re: Fiesty: updates on 3-29-07 royally messed up fstab
I also had severe problems with 3/29 updates. I have an Acer Ferrari with ATI Mobility Radeon 7000. My video card no longer works. I tried updating xorg. No luck. I tried adding the following to the conf file; OptionMonitorLayout LVDS,AUTO which has worked for the past 8 or so of my installs. No luck. Feisty does run from the command line. I have done apt-get update, apt-get install, and then apt-get upgrade. All updates / upgrades are in place. I'm not very technically proficient, but any test I can run to be of help I will willingly do. Susan -- Fiesty: updates on 3-29-07 royally messed up fstab https://launchpad.net/bugs/98651 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 98612] Re: Sees wireless networks but wont connect
This is my 2-cent workaround, in case you have the same problem I do. My Acer Ferrari never finds the wireless on bootup. Somehow it always looks for the last IP address rather than a new one. So, I just open the wireless icon in the top right-hand corner and re-click on the wireless network I want. When it start looking again, it usually succeeds. If not, I re-boot the modem. Instant success. -- Sees wireless networks but wont connect https://launchpad.net/bugs/98612 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 98800] xserver-xorg-video-ati broken in Feisty
Public bug reported: Binary package hint: xserver-xorg-video-ati Problem with 3/29 updates to Feisty. I have an Acer Ferrari with ATI Mobility Radeon 7000. My video card no longer works. I tried updating xorg. No luck. I tried adding the following to the conf file; Option MonitorLayout LVDS,AUTO which has worked for the past 8 or so of my installs. No luck. Feisty does run from the command line. I have done apt-get update, apt-get install, and then apt-get upgrade. All updates / upgrades are in place. I'm not very technically proficient, but I'll help if I can. ** Affects: xserver-xorg-video-ati (Ubuntu) Importance: Undecided Status: Unconfirmed -- xserver-xorg-video-ati broken in Feisty https://launchpad.net/bugs/98800 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 85558] Re: [apport] mono crashed with SIGSEGV
Sorry. Just re-installed. Will hold on t this advice for future crashes. susan -Original Message- From: dBera [EMAIL PROTECTED] Sent: Feb 21, 2007 11:47 AM To: [EMAIL PROTECTED] Subject: [Bug 85558] Re: [apport] mono crashed with SIGSEGV Hi, Unfortunately crash dumps of mono programs are not immediately helpful. Can you attach the contents of the directory ~/.beagle/Log ? If the files in there are of large size, try attaching only the files pointed to by ~/.beagle/Log/current-IndexHelper ~/.beagle/Log/current-Beagle Thanks. -- [apport] mono crashed with SIGSEGV https://launchpad.net/bugs/85558 -- [apport] mono crashed with SIGSEGV https://launchpad.net/bugs/85558 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85558] [apport] mono crashed with SIGSEGV
Public bug reported: Binary package hint: mono I have beagle installed. That may be part of the problem. During the crash, I was running synaptic, and have trouble because it says my vmware player kernel-modules package is corrupt, so I tried to remove it. But ... When trying to remove it in Synaptic, I get the following error message: E: vmware-player-kernel-modules-2.6.20-8: Package is in a very bad inconsistent state - you should (That's the whole message.) I think I submitted a synaptic crash report on the same subject. If you need me to run anything just ask. I need a bit of hand-holding but am very willing. I love you people, and think you do a great job. ProblemType: Crash CrashCounter: 1 Date: Thu Feb 15 21:41:41 2007 DistroRelease: Ubuntu 7.04 ExecutablePath: /usr/bin/mono Package: mono-jit 1.2.3-0ubuntu1 ProcCmdline: beagled-helper /usr/lib/beagle/IndexHelper.exe ProcCwd: /home/susan ProcEnviron: SHELL=/bin/bash PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games LANG=en_US.UTF-8 Signal: 11 SourcePackage: mono StacktraceTop: ?? () ?? () Uname: Linux susan 2.6.20-8-generic #2 SMP Tue Feb 13 05:18:42 UTC 2007 i686 GNU/Linux UserGroups: adm admin audio cdrom dialout dip floppy lpadmin plugdev scanner video ** Affects: mono (Ubuntu) Importance: Undecided Status: Unconfirmed -- [apport] mono crashed with SIGSEGV https://launchpad.net/bugs/85558 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85558] Re: [apport] mono crashed with SIGSEGV
** Attachment added: CoreDump.gz http://librarian.launchpad.net/6449826/CoreDump.gz ** Attachment added: Dependencies.txt http://librarian.launchpad.net/6449827/Dependencies.txt ** Attachment added: Disassembly.txt http://librarian.launchpad.net/6449828/Disassembly.txt ** Attachment added: ProcMaps.txt http://librarian.launchpad.net/6449829/ProcMaps.txt ** Attachment added: ProcStatus.txt http://librarian.launchpad.net/6449830/ProcStatus.txt ** Attachment added: Registers.txt http://librarian.launchpad.net/6449831/Registers.txt ** Attachment added: Stacktrace.txt http://librarian.launchpad.net/6449832/Stacktrace.txt ** Attachment added: ThreadStacktrace.txt http://librarian.launchpad.net/6449833/ThreadStacktrace.txt -- [apport] mono crashed with SIGSEGV https://launchpad.net/bugs/85558 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85672] [apport] beagled crashed with SIGSEGV in ()
Public bug reported: Binary package hint: beagle followed update. ProblemType: Crash Date: Fri Feb 16 17:14:49 2007 Disassembly: 0xb683d460: DistroRelease: Ubuntu 7.04 ExecutablePath: /usr/bin/beagled InterpreterPath: /usr/bin/mono Package: beagle 0.2.16-0ubuntu4 ProcCmdline: beagled /usr/lib/beagle/BeagleDaemon.exe --bg ProcCwd: /home/susan ProcEnviron: SHELL=/bin/bash PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games LANG=en_US.UTF-8 Signal: 11 SourcePackage: beagle StacktraceTop: ?? () mono_main () ?? () ?? () Uname: Linux susan 2.6.20-8-generic #2 SMP Tue Feb 13 05:18:42 UTC 2007 i686 GNU/Linux UserGroups: adm admin audio cdrom dialout dip floppy lpadmin plugdev scanner video ** Affects: beagle (Ubuntu) Importance: Undecided Status: Unconfirmed -- [apport] beagled crashed with SIGSEGV in () https://launchpad.net/bugs/85672 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85672] Re: [apport] beagled crashed with SIGSEGV in ()
** Attachment added: CoreDump.gz http://librarian.launchpad.net/6454606/CoreDump.gz ** Attachment added: Dependencies.txt http://librarian.launchpad.net/6454607/Dependencies.txt ** Attachment added: ProcMaps.txt http://librarian.launchpad.net/6454608/ProcMaps.txt ** Attachment added: ProcStatus.txt http://librarian.launchpad.net/6454609/ProcStatus.txt ** Attachment added: Registers.txt http://librarian.launchpad.net/6454610/Registers.txt ** Attachment added: Stacktrace.txt http://librarian.launchpad.net/6454611/Stacktrace.txt ** Attachment added: ThreadStacktrace.txt http://librarian.launchpad.net/6454612/ThreadStacktrace.txt -- [apport] beagled crashed with SIGSEGV in () https://launchpad.net/bugs/85672 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 28925] Duplicate(s) and also X800 - problem also in feisty
ThorbjørnTux: Part of this problem may be confusion with bug reports concerning the malfunction of initramfs-tools, which causes the system not to boot under AMD-64. -- X fails to start in dapper, edgy with ati X600/X700/X800 (control not delegated to radeon driver, ati complains about Mach64). https://launchpad.net/bugs/28925 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 77266] Feisty upgrade to 2.6.20 does not boot on AMD64
*** This bug is a duplicate of bug 76785 *** Public bug reported: Binary package hint: kernel-image-2.6.20-2-generic-di I installed Feisty yesterday (Dec 26) from the latest CD image available. Install worked fine. Booted up. Everything fine. Then dist-upgraded to new version which I believe is 2.6.20-2. Upgrade seemed to go well. No hang-ups, no error messages. Then I re-booted. ??? It gets stuck on the splash screen. I can't even get it into safe mode to look for an error log. My machine is an Acer 4005 AMD64. I have tried installing both by using my old Linux partition and by creating a new partition. This does not seem to make a difference. ** Affects: linux-source-2.6.20 (Ubuntu) Importance: Undecided Status: Unconfirmed -- Feisty upgrade to 2.6.20 does not boot on AMD64 https://launchpad.net/bugs/77266 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 76929] Re: Kernel panic message after booting kernel 2.6.20
Same problem here. Acer Ferrari 64-bit laptop. I'll try to get kern.log. -- Kernel panic message after booting kernel 2.6.20 https://launchpad.net/bugs/76929 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 76292] Re: ubuntu-source 2.6.20 does not boot on 64-bit
Jani, I did as you said and blacklisted bcm43xx. That was the problem. Now it boots fine. However, now I have no internet connectivity. Unless someone wants me to send any error logs or do any testing, I am going to try re-installing from a new Feisty disk tomorrow a.m., and see what that gives me. -- ubuntu-source 2.6.20 does not boot on 64-bit https://launchpad.net/bugs/76292 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 76292] ubuntu-source 2.6.20 does not boot on 64-bit
Public bug reported: Just did synaptic update. Downloaded and installed new 2.6.20-02-generic on my Acer Ferrari 64-bit. Re-booted. Error message various: 15.079 failed (With numbers instead of x's) 10.xxx failed Login screen frozen. No cursor movement, no active keys. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- ubuntu-source 2.6.20 does not boot on 64-bit https://launchpad.net/bugs/76292 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 72219] Re: Tomboy does not install in feisty
As per your request, I tried to upload one of my files that doesn't install. I got an error message saying that the file was blank! I tried three separate files. They all seem to be blank. How could that happen? I have moved them around but not tampered with them, that I know of. -- Tomboy does not install in feisty https://launchpad.net/bugs/72219 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 72219] Tomboy does not install in feisty
Public bug reported: Binary package hint: tomboy Please refer to attached. Tomboy does not install on my amd64 machine. Not sure what the problem is. output attached. ** Affects: tomboy (Ubuntu) Importance: Undecided Status: Unconfirmed -- Tomboy does not install in feisty https://launchpad.net/bugs/72219 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 72219] Re: Tomboy does not install in feisty
I tried to install Tomboy from both add/remove in Applications, and through Synaptic. Add/remove failed. Synaptic told me I needed old libraries. Did that. Tomboy came up once, without recognizing any of my prior notes, when I called it up through a terminal window. But since then--nothing. Not sure what the problem is, but have attached report. Could part of the problem be that Tomboy is now at version 0.5.0, and the repository is at 0.4.1? ** Attachment added: output report trying to load Tomboy http://librarian.launchpad.net/5101044/TomboyLoad.txt -- Tomboy does not install in feisty https://launchpad.net/bugs/72219 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 72219] Re: Tomboy does not install in feisty
In the feisty AMD64 repository, Tomboy is only at version 0.4.1. I did not make a note of which library it did not use. So I un-installed it, upgraded all my packages, and re-installed it. This time Tomboy did not complain about the libraries, but Tomboy 0.4.1 still installs, and still does not recognize my previous notes stored in .tomboy. -- Tomboy does not install in feisty https://launchpad.net/bugs/72219 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 38263] Re: freeze at startup
Here is the lspci -vv ** Attachment added: lspci -vv http://librarian.launchpad.net/4441614/lspci%20-vv -- freeze at startup https://launchpad.net/bugs/38263 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 36998] Re: Kernel Won't Boot on an IBM Thinkpad R30
I have an Acer Ferrari 4005 AMD 64. Boot hangs for a very long time but eventually (about 1-2 minutes later) boots after messages about the timer clock. Edgy Knot 3. See Bug 38263 Have the feeling these two bugs are not identical but inter-related. I have attached my lspci-vv and will attach lspci-vvn -- Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/bugs/36998 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 38263] Re: freeze at startup
here is the lspci -vvn These files are from my Acer Ferrari. All Edgy updates current as of this moment. No other problems except that the kernel doesn't load the bcmw to run the wireless. But I'll report that elsewhere. ** Attachment added: lspci -vvn http://librarian.launchpad.net/4441617/lspci%20-vvn -- freeze at startup https://launchpad.net/bugs/38263 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 36998] Re: Kernel Won't Boot on an IBM Thinkpad R30
as promised lspci -vvn ** Attachment added: lspci -vvn http://librarian.launchpad.net/4441630/lspci%20-vvn -- Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/bugs/36998 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 22985] Re: [x700] fails to infer lvds for primary connector on acer ferrari 4005
What about the virtual-terminal problem mentioned above which I have quoted below? On a Toshiba Satellite M70 with an X700 adding the line Option MonitorLayout LVDS,AUTO to xorg.conf does solve the blank screen problem, but when switching to a virtual terminal with ctrl-alt-f1, the screen gets corrupted (different shades of vertical lines). When I switch back with ctrl- alt-f7, the screen is still corrupted. -- [x700] fails to infer lvds for primary connector on acer ferrari 4005 https://launchpad.net/bugs/22985 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 38263] Re: freeze at startup
As of Edgy kernel 2.6.17.9.23 on AMD64, the bootup error message flashes the following message: 8254 timer not connected and then goes very slowly and grinds to a halt with the following message: [22.xx] irq 233: nobody cared (try booting with the irqpoll option [22.xx] handlers: [22.xx] [881110c0] (ohchi_irq_handler*0x0/0x7ff [ochi 1394] [22.xx] Disabling IRQ #233 and then starts again. I was told on a MEPIS web site that my problem MIGHT be PARTLY that my BIOS should be upgraded from S3A19 to 3A23, but I have not tried this yet. -- freeze at startup https://launchpad.net/bugs/38263 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 38263] Re: [Bug 38263] Re: freeze at startup
Guessed wrong. I have the latest edgy, and it was NOT fixed until yesterday. Now it is patch-fixed somehow, but Edgy gets stuck and loads VERY VERY slowly. I am in a library computer far from home as I read this, but will send bug reports this evening. Susan Cragin -- freeze at startup https://launchpad.net/bugs/38263 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 58915] Re: Python upgrade errors
Just re-installed using today's Flight 3. Install completed at 12:00 noon EST, USA. Bug not fixed. Machine Acer Ferrari 4005 AMD64. Selected all default options. After re-boot, synaptic package manager gives me the following: E: /var/cache/apt/archives/python-apt_0.6.19ubuntu5_amd64.deb: subprocess new pre-removal script returned error exit status 1 Will try again at about 3:00 EST. -- Python upgrade errors https://launchpad.net/bugs/58915 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 38263] Re: freeze at startup
Acer Ferrari 4005 AMD Turion 64 with ATI mobility radeon X700 Knot 3 all updates. Last tried 7:30 p.m. EST. Error message 12.105122 MP-BIOS bug: 8254 timer not connected to IO-APIC kernel direct mapping tables up to fee 01000 @ 8000-8000 Now, having said that, I did modify the /etc/X11/xorg.conf file to include the line: OptionMonitorLayout LVDS,AUTO I always do this. Laptop monitor doesn't work otherwise. -- freeze at startup https://launchpad.net/bugs/38263 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 58722] Nautilus crashes when restoring files from wastebasket
Public bug reported: Binary package hint: nautilus thru drag-and-drop to desktop ** Affects: nautilus (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Nautilus crashes when restoring files from wastebasket https://launchpad.net/bugs/58722 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 58722] Re: Nautilus crashes when restoring files from wastebasket
Perhaps my operation (drag-and-drop from wastebasket to desktop) was illegal? but it got results. The file did move, it just made nautilus crash. -- Nautilus crashes when restoring files from wastebasket https://launchpad.net/bugs/58722 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57622] Re: Menu Layout Crashes (alacarte menu editor)
I had the same crash. Here is probably the same bug report. -- Menu Layout Crashes (alacarte menu editor) https://launchpad.net/bugs/57622 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57274] mono crashed
Public bug reported: I opened synaptic package manager and started downloading package files, and mono crashed. In an unrelated event, which I think is connected to this, my taskbar malfunctioned. I highlighted Applications and the list flickered and did not allow me to access any of the programs. ** Affects: mono (Ubuntu) Importance: Untriaged Status: Unconfirmed -- mono crashed https://launchpad.net/bugs/57274 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57274] Re: mono crashed
here is attachment. I know this bug has been reported before, but I can't find it, and I believe work has been done on it, and that this crash report may contain different information. Sorry for the work if it does not. -- mono crashed https://launchpad.net/bugs/57274 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 56598] Edgy Eft - new firefox install breaks firefox-themes-ubuntu
Public bug reported: Binary package hint: firefox Get:1 http://archive.ubuntu.com edgy/main firefox 1.99+2.0b1+dfsg-1ubuntu2 [10.2MB] Get:2 http://archive.ubuntu.com edgy/main libgcj7-0 4.1.1-10ubuntu3 [10.0MB] Fetched 20.2MB in 1m57s (171kB/s) dpkg: regarding .../firefox_1.99+2.0b1+dfsg-1ubuntu2_amd64.deb containing firefox: firefox breaks firefox-themes-ubuntu (= 0.4.5) firefox-themes-ubuntu (version 0.4.5) is installed. dpkg: error processing /var/cache/apt/archives/firefox_1.99+2.0b1+dfsg-1ubuntu2_amd64.deb (--unpack): installing firefox would break firefox-themes-ubuntu, and deconfiguration is not permitted (--auto-deconfigure might help) Errors were encountered while processing: /var/cache/apt/archives/firefox_1.99+2.0b1+dfsg-1ubuntu2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) ** Affects: firefox (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Edgy Eft - new firefox install breaks firefox-themes-ubuntu https://launchpad.net/bugs/56598 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 56467] mono keeps crashing on my system
Public bug reported: I don't know why it crashed. Seems to be when I am exiting Firefox. will attach bu report /var/crash/_usr_bin_mono.1000.crash ** Affects: mono (Ubuntu) Importance: Untriaged Status: Unconfirmed -- mono keeps crashing on my system https://launchpad.net/bugs/56467 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 56467] Re: mono keeps crashing on my system
here is the attachment -- mono keeps crashing on my system https://launchpad.net/bugs/56467 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 17881] Re: usb flash memory hangs after copying few MB
more info posted at Ubuntu support request 1447. -- usb flash memory hangs after copying few MB https://launchpad.net/bugs/17881 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 17881] Re: usb flash memory hangs after copying few MB
It's the copy command, or the memory allocation, or something, since the same thing happens copying from CD/DVD. I just tried copying from a CD and then a DVD, and the same thing happens in Eft. (I have all the latest updates including kernel as of August 10.) Copying appears to get stuck copying files. one CAB file at 512.8 KB won't copy at all. But JPGs larger than that copied, albiet very, very slowly. I have an AMD64 Acer Ferrari with 1GB RAM. -- usb flash memory hangs after copying few MB https://launchpad.net/bugs/17881 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 17881] Re: usb flash memory hangs after copying few MB
should have added to above... Linux kernel AMD 2.6.17.3. x86-64. -- usb flash memory hangs after copying few MB https://launchpad.net/bugs/17881 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 29566] Re: Missing firmware for bcm43xx driver during install
On my Acer 4005 AMD64, loaded edgy on 8/7 and updated today using wire. But have two wireless cards, internal and Belkin PCMCIA. Neither work. On bootup, various error messages flash by relating to bcm43xx not loading. PCMCIA card has never lit up. In Gnome, when I try System / Administration / Networking i get a system crash, but that's Bug 55458. Want any error ? Tests? just let me know. -- Missing firmware for bcm43xx driver during install https://launchpad.net/bugs/29566 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 39232] Re: Dapper on Acer Aspire 1692WLMi: LCD display is black after booting
Confirm for Acer Ferrari 4005 AMD64. Want tests? let me know. Log attached. -- Dapper on Acer Aspire 1692WLMi: LCD display is black after booting https://launchpad.net/bugs/39232 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 22985] Temporary patch suggestion
Commenting out Load dri does not work. either with favorite fix mentioned above, or with only 1st line, or without it. In other news Synaptic also does not work Adept will not install I wonder how one obtains Edgy updates? -- [x700] fails to infer lvds for primary connector on acer ferrari 4005 https://launchpad.net/bugs/22985 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 55696] network-admin crashes when try to open in Gnome menu
Public bug reported: system-generated bug report attached. Machine Acer Ferrari 4005, AMD 64, today's Edgy. ** Affects: Ubuntu Importance: Untriaged Status: Unconfirmed -- network-admin crashes when try to open in Gnome menu https://launchpad.net/bugs/55696 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 55696] Re: network-admin crashes when try to open in Gnome menu
Sorry. here is bug report. -- network-admin crashes when try to open in Gnome menu https://launchpad.net/bugs/55696 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 55696] Re: [Bug 55696] Re: network-admin crashes when try to open in Gnome menu
Help. When I get to step 2b sudo apt-get build-dep gnome-system-tools it tells me unable to find a source package. I must be doing something wrong? -- network-admin crashes when try to open in Gnome menu https://launchpad.net/bugs/55696 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 55696] Re: [Bug 55696] Re: network-admin crashes when try to open in Gnome menu
Figured it out. Hope this is what was wanted. Backtrace of network-admin gnome-system tools. By the way, gedit doesn't come up either. I'll back-trace that tomorrow. Starting program: /usr/bin/network-admin [Thread debugging using libthread_db enabled] [New Thread 47047991597856 (LWP 28322)] (network-admin:28322): libglade-WARNING **: Error loading image: Failed to open file '/usr/share/gnome-system-tools/pixmaps/unsupported- distro.png': No such file or directory (network-admin:28322): libglade-WARNING **: could not convert string to type `GdkPixbuf' for property `pixbuf' 28322: arguments to dbus_message_iter_init() were incorrect, assertion message != NULL failed in file dbus-message.c line 1442. This is normally a bug in some application using the D-BUS library. dbus message iterator looks uninitialized or corrupted 28322: arguments to dbus_message_iter_recurse() were incorrect, assertion _dbus_message_iter_check (real) failed in file dbus-message.c line 1609. This is normally a bug in some application using the D-BUS library. dbus message iterator looks uninitialized or corrupted 28322: arguments to dbus_message_iter_get_arg_type() were incorrect, assertion _dbus_message_iter_check (real) failed in file dbus-message.c line 1561. This is normally a bug in some application using the D-BUS library. 28322: arguments to dbus_message_unref() were incorrect, assertion message != NULL failed in file dbus-message.c line 1102. This is normally a bug in some application using the D-BUS library. ** (network-admin:28322): CRITICAL **: There was an error communicating with the backends: The name org.freedesktop.SystemToolsBackends was not provided by any .service files ** (network-admin:28322): CRITICAL **: There was an error communicating with the backends: The name org.freedesktop.SystemToolsBackends was not provided by any .service files 28322: arguments to dbus_message_iter_init() were incorrect, assertion message != NULL failed in file dbus-message.c line 1442. This is normally a bug in some application using the D-BUS library. dbus message iterator looks uninitialized or corrupted 28322: arguments to dbus_message_iter_get_basic() were incorrect, assertion _dbus_message_iter_check (real) failed in file dbus-message.c line 1692. This is normally a bug in some application using the D-BUS library. Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 47047991597856 (LWP 28322)] 0x2aca35e610d0 in utils_get_string () from /usr/lib/liboobs-1.so.0 (gdb) (gdb) cd / Working directory /. (gdb) ls Undefined command: ls. Try help. (gdb) run The program being debugged has been started already. Start it from the beginning? (y or n) n Program not restarted. (gdb) backtrace #0 0x2aca35e610d0 in utils_get_string () from /usr/lib/liboobs-1.so.0 #1 0x2aca35e61925 in oobs_session_get_platform () from /usr/lib/liboobs-1.so.0 #2 0x00410c2e in gst_tool_constructor (type=5917792, n_construct_properties=3, construct_params=0x5a5560) at gst-tool.c:279 #3 0x00408fba in gst_network_tool_constructor (type=5917792, n_construct_properties=3, construct_params=0x5a5560) at network-tool.c:177 #4 0x2aca36323370 in g_object_newv () from /usr/lib/libgobject-2.0.so.0 #5 0x2aca36323d7d in g_object_new_valist () from /usr/lib/libgobject-2.0.so.0 #6 0x2aca36323f21 in g_object_new () from /usr/lib/libgobject-2.0.so.0 #7 0x00409799 in gst_network_tool_new () at network-tool.c:349 #8 0x0040f1ad in main (argc=1, argv=0x7fff7928ca28) at main.c:165 (gdb) thread apply all backtrace Thread 1 (Thread 47047991597856 (LWP 28322)): #0 0x2aca35e610d0 in utils_get_string () from /usr/lib/liboobs-1.so.0 #1 0x2aca35e61925 in oobs_session_get_platform () from /usr/lib/liboobs-1.so.0 #2 0x00410c2e in gst_tool_constructor (type=5917792, n_construct_properties=3, construct_params=0x5a5560) at gst-tool.c:279 #3 0x00408fba in gst_network_tool_constructor (type=5917792, n_construct_properties=3, construct_params=0x5a5560) at network-tool.c:177 #4 0x2aca36323370 in g_object_newv () from /usr/lib/libgobject-2.0.so.0 #5 0x2aca36323d7d in g_object_new_valist () from /usr/lib/libgobject-2.0.so.0 #6 0x2aca36323f21 in g_object_new () from /usr/lib/libgobject-2.0.so.0 #7 0x00409799 in gst_network_tool_new () at network-tool.c:349 #8 0x0040f1ad in main (argc=1, argv=0x7fff7928ca28) at main.c:165 (gdb) thread apply all backtrace -- network-admin crashes when try to open in Gnome menu https://launchpad.net/bugs/55696 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 22985] Re: [x700] fails to infer lvds for primary connector on acer ferrari 4005
Just installed Edgy from CD on my acer ferrari. Screen black again, like Dapper, but this time appending my favorite fix to xorg.conf did not seem to work. Option MonitorLayout LVDS,CRT Option MetaModes 680x480,1680x1050 -- [x700] fails to infer lvds for primary connector on acer ferrari 4005 https://launchpad.net/bugs/22985 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
