[Bug 1099203] Re: hot swap gpt hdd destroys partion table during swaping
The bug stil exists in upstream kernel 3.8.2. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1099203 Title: hot swap gpt hdd destroys partion table during swaping To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1099203/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1099203] Re: hot swap gpt hdd destroys partion table during swaping
** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1099203 Title: hot swap gpt hdd destroys partion table during swaping To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1099203/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1099203] Re: hot swap gpt hdd destroys partion table during swaping
The bug also exists in upstream kernel 3.8-rc4. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1099203 Title: hot swap gpt hdd destroys partion table during swaping To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1099203/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1099203] Re: hot swap gpt hdd destroys partion table during swaping
** Tags added: gpt hot hotplug swap -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1099203 Title: hot swap gpt hdd destroys partion table during swaping To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1099203/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1099203] Re: hot swap gpt hdd destroys partion table during swaping
Tested with your suggest kernel version 3.8-rc3 and the the bug stil appears. ** Tags added: kernel-bug-exists-upstream ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1099203 Title: hot swap gpt hdd destroys partion table during swaping To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1099203/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1099203] Re: hot swap gpt hdd destroys partion table during swaping
demsg log seems to by the same:
[ 40.556993] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
(null)
[ 54.742955] ata6: exception Emask 0x10 SAct 0x0 SErr 0x409 action 0xe
frozen
[ 54.742968] ata6: irq_stat 0x00400040, connection status changed
[ 54.742970] ata6: SError: { PHYRdyChg 10B8B DevExch }
[ 54.742973] ata6: hard resetting link
[ 55.464133] ata6: SATA link down (SStatus 0 SControl 300)
[ 60.459325] ata6: hard resetting link
[ 60.778977] ata6: SATA link down (SStatus 0 SControl 300)
[ 60.778994] ata6: limiting SATA link speed to 1.5 Gbps
[ 65.774178] ata6: hard resetting link
[ 66.093819] ata6: SATA link down (SStatus 0 SControl 310)
[ 66.093836] ata6.00: disabled
[ 66.093846] ata6: EH complete
[ 66.093908] ata6.00: detaching (SCSI 5:0:0:0)
[ 66.095212] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[ 66.095244] sd 5:0:0:0: [sdb]
[ 66.095247] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 66.095249] sd 5:0:0:0: [sdb] Stopping disk
[ 66.095256] sd 5:0:0:0: [sdb] START_STOP FAILED
[ 66.095258] sd 5:0:0:0: [sdb]
[ 66.095259] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 77.891415] ata6: exception Emask 0x10 SAct 0x0 SErr 0x404 action 0xe
frozen
[ 77.891421] ata6: irq_stat 0x0040, connection status changed
[ 77.891424] ata6: SError: { CommWake DevExch }
[ 77.891432] ata6: hard resetting link
[ 78.949371] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 78.950315] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 78.950321] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 78.950324] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 78.950880] ata6.00: HPA detected: current 5860531055, native 5860533168
[ 78.951058] ata6.00: ATA-8: ST3000DM001-1CH166, CC24, max UDMA/133
[ 78.951063] ata6.00: 5860531055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 78.951238] ata6.00: failed to get Identify Device Data, Emask 0x1
[ 78.952257] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 78.952263] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 78.952266] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 78.953129] ata6.00: failed to get Identify Device Data, Emask 0x1
[ 78.953136] ata6.00: configured for UDMA/133
[ 78.953291] ata6: EH complete
[ 78.953454] scsi 5:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24
PQ: 0 ANSI: 5
[ 78.953669] sd 5:0:0:0: [sdb] 5860531055 512-byte logical blocks: (3.00
TB/2.72 TiB)
[ 78.953673] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 78.953708] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 78.953754] sd 5:0:0:0: [sdb] Write Protect is off
[ 78.953760] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 78.953796] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 78.971263] sdb: unknown partition table
[ 78.971553] sd 5:0:0:0: [sdb] Attached SCSI disk
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1099203
Title:
hot swap gpt hdd destroys partion table during swaping
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1099203/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1099203] Re: hot swap gpt hdd destroys partion table during swaping
executed apport-collect via linux mint 14 and upstream kernel
** Tags added: apport-collected nadia
** Description changed:
Hallo,
I have a Asrock Z77 Pro4-m Board and a Seagate 3tb ST3000DM00-1CH166
with Firmware cc24.
with Ubutnu 12.10 64bit also tested it with fedora 18 beta
A Bios update did have I done. So the version is currently on 1.70.
The HDD Bios I cant update because there is no newer version.
The Hdd is connect to sata.
The HDD i have formated via gparted as primary partion with ext4 and gpt
as partition table. Alignment was set to optimal.
The Problem occurs if hot unplug(with umount) the disk and try to hot
replug(with mount) it. Then the partition table isnt recognized and
gdisk shows me:
MBR: projective
GPT: damaged
In the case I can always start the system via Paragon Live Image which
repairs me automatically the gpt header so that I have not to repair it
inside the tool. After restarting Ubuntu I can mount the drive again.
In the case where the partition is damaged, the partion is the most of
time recogonized but the filesystem is unknown. But not everytime.
The same occurs with the mainline kernel not only with the shipped
kernel.
Smartvalues are ok.
I also changed the sata port,chipset and cable but the problem occurs
further.
In the bios all controllers are set to AHCI.
Here some dmesg output:
[ 103.561920] ata6: exception Emask 0x10 SAct 0x0 SErr 0x409 action 0xe
frozen
[ 103.561925] ata6: irq_stat 0x00400040, connection status changed
[ 103.561928] ata6: SError: { PHYRdyChg 10B8B DevExch }
[ 103.561933] ata6: hard resetting link
[ 104.283829] ata6: SATA link down (SStatus 0 SControl 300)
[ 109.279026] ata6: hard resetting link
[ 109.583723] ata6: SATA link down (SStatus 0 SControl 300)
[ 109.583732] ata6: limiting SATA link speed to 1.5 Gbps
[ 114.578912] ata6: hard resetting link
[ 114.883622] ata6: SATA link down (SStatus 0 SControl 310)
[ 114.883630] ata6.00: disabled
[ 114.883644] ata6: EH complete
[ 114.883750] ata6.00: detaching (SCSI 5:0:0:0)
[ 114.885244] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[ 114.885275] sd 5:0:0:0: [sdb]
[ 114.885278] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 114.885280] sd 5:0:0:0: [sdb] Stopping disk
[ 114.885288] sd 5:0:0:0: [sdb] START_STOP FAILED
[ 114.885290] sd 5:0:0:0: [sdb]
[ 114.885291] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 128.864419] ata6: exception Emask 0x10 SAct 0x0 SErr 0x400 action 0xe
frozen
[ 128.864424] ata6: irq_stat 0x0040, connection status changed
[ 128.864426] ata6: SError: { DevExch }
[ 128.864433] ata6: hard resetting link
[ 133.203987] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 133.204890] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 133.204895] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 133.204899] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 133.205459] ata6.00: HPA detected: current 5860531055, native 5860533168
[ 133.205604] ata6.00: ATA-8: ST3000DM001-1CH166, CC24, max UDMA/133
[ 133.205606] ata6.00: 5860531055 sectors, multi 0: LBA48 NCQ (depth 31/32),
AA
[ 133.205786] ata6.00: failed to get Identify Device Data, Emask 0x1
[ 133.206812] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 133.206818] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 133.206821] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 133.207722] ata6.00: failed to get Identify Device Data, Emask 0x1
[ 133.207728] ata6.00: configured for UDMA/133
[ 133.207743] ata6: EH complete
[ 133.207866] scsi 5:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24
PQ: 0 ANSI: 5
[ 133.208676] sd 5:0:0:0: [sdb] 5860531055 512-byte logical blocks: (3.00
TB/2.72 TiB)
[ 133.208682] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 133.208758] sd 5:0:0:0: [sdb] Write Protect is off
[ 133.208763] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 133.208796] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 133.210849] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 133.224978] sdb: unknown partition table
[ 133.225190] sd 5:0:0:0: [sdb] Attached SCSI disk
+ ---
+ ApportVersion: 2.6.1-0ubuntu9
+ Architecture: amd64
+ DistroRelease: LinuxMint 14
+ InstallationDate: Installed on 2013-01-14 (0 days ago)
+ InstallationMedia: Linux Mint 14 Nadia - Release amd64 (20121120)
+ MarkForUpload: True
+ Package: linux (not installed)
+ ProcEnviron:
+ TERM=xterm
+ PATH=(custom, no user)
+ XDG_RUNTIME_DIR=set
+ LANG=en_US.UTF-8
+ SHELL=/bin/bash
+ Tags: nadia
+ Uname: Linux 3.8.0-030800rc3-generic x86_64
+ UnreportableReason: This is not an official LinuxMint
[Bug 1099203] [NEW] hot swap gpt hdd destroys partion table during swaping
Public bug reported:
Hallo,
I have a Asrock Z77 Pro4-m Board and a Seagate 3tb ST3000DM00-1CH166
with Firmware cc24.
with Ubutnu 12.10 64bit also tested it with fedora 18 beta
A Bios update did have I done. So the version is currently on 1.70.
The HDD Bios I cant update because there is no newer version.
The Hdd is connect to sata.
The HDD i have formated via gparted as primary partion with ext4 and gpt
as partition table. Alignment was set to optimal.
The Problem occurs if hot unplug(with umount) the disk and try to hot
replug(with mount) it. Then the partition table isnt recognized and
gdisk shows me:
MBR: projective
GPT: damaged
In the case I can always start the system via Paragon Live Image which
repairs me automatically the gpt header so that I have not to repair it
inside the tool. After restarting Ubuntu I can mount the drive again.
In the case where the partition is damaged, the partion is the most of
time recogonized but the filesystem is unknown. But not everytime.
The same occurs with the mainline kernel not only with the shipped
kernel.
Smartvalues are ok.
I also changed the sata port,chipset and cable but the problem occurs
further.
In the bios all controllers are set to AHCI.
Here some dmesg output:
[ 103.561920] ata6: exception Emask 0x10 SAct 0x0 SErr 0x409 action 0xe
frozen
[ 103.561925] ata6: irq_stat 0x00400040, connection status changed
[ 103.561928] ata6: SError: { PHYRdyChg 10B8B DevExch }
[ 103.561933] ata6: hard resetting link
[ 104.283829] ata6: SATA link down (SStatus 0 SControl 300)
[ 109.279026] ata6: hard resetting link
[ 109.583723] ata6: SATA link down (SStatus 0 SControl 300)
[ 109.583732] ata6: limiting SATA link speed to 1.5 Gbps
[ 114.578912] ata6: hard resetting link
[ 114.883622] ata6: SATA link down (SStatus 0 SControl 310)
[ 114.883630] ata6.00: disabled
[ 114.883644] ata6: EH complete
[ 114.883750] ata6.00: detaching (SCSI 5:0:0:0)
[ 114.885244] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[ 114.885275] sd 5:0:0:0: [sdb]
[ 114.885278] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 114.885280] sd 5:0:0:0: [sdb] Stopping disk
[ 114.885288] sd 5:0:0:0: [sdb] START_STOP FAILED
[ 114.885290] sd 5:0:0:0: [sdb]
[ 114.885291] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 128.864419] ata6: exception Emask 0x10 SAct 0x0 SErr 0x400 action 0xe
frozen
[ 128.864424] ata6: irq_stat 0x0040, connection status changed
[ 128.864426] ata6: SError: { DevExch }
[ 128.864433] ata6: hard resetting link
[ 133.203987] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 133.204890] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 133.204895] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 133.204899] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 133.205459] ata6.00: HPA detected: current 5860531055, native 5860533168
[ 133.205604] ata6.00: ATA-8: ST3000DM001-1CH166, CC24, max UDMA/133
[ 133.205606] ata6.00: 5860531055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 133.205786] ata6.00: failed to get Identify Device Data, Emask 0x1
[ 133.206812] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 133.206818] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 133.206821] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 133.207722] ata6.00: failed to get Identify Device Data, Emask 0x1
[ 133.207728] ata6.00: configured for UDMA/133
[ 133.207743] ata6: EH complete
[ 133.207866] scsi 5:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24
PQ: 0 ANSI: 5
[ 133.208676] sd 5:0:0:0: [sdb] 5860531055 512-byte logical blocks: (3.00
TB/2.72 TiB)
[ 133.208682] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 133.208758] sd 5:0:0:0: [sdb] Write Protect is off
[ 133.208763] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 133.208796] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 133.210849] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 133.224978] sdb: unknown partition table
[ 133.225190] sd 5:0:0:0: [sdb] Attached SCSI disk
** Affects: ubuntu
Importance: Undecided
Status: New
** Affects: fedora
Importance: Undecided
Status: New
** Description changed:
Hallo,
I have a Asrock Z77 Pro4-m Board and a Seagate 3tb ST3000DM00-1CH166
with Firmware cc24.
- with Ubutnu 12.10
+ with Ubutnu 12.10 64bit
A Bios update did have I done. So the version is currently on 1.70.
The HDD Bios I cant update because there is no newer version.
The Hdd is connect to sata.
The HDD i have formated via gparted as primary partion with ext4 and gpt
as partition table. Alignment was set to optimal.
The Problem occurs if hot unplug(with umount) the disk and try to hot
replug(with mount) it. Then the partition table isnt recognized and
gdisk shows me:
MBR:
[Bug 1074840] Re: [needs-packaging] Zpaq package isnt up to date (wasnt updated over 2 years)
Recent quote from the author in the development thread of zpaq about the old package: Didn't know zpaq was in Ubuntu. v1.10 is really old. It is single threaded and uses interpreted ZPAQL so it is pretty slow. http://encode.ru/threads/456-zpaq-updates?p=31251viewfull=1#post31251 So please update it to a more recent version. Also I think a new package would confuse the users. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1074840 Title: [needs-packaging] Zpaq package isnt up to date (wasnt updated over 2 years) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zpaq/+bug/1074840/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1074840] [NEW] Zpaq package isnt up to date (wasnt updated over 2 years)
Public bug reported: The current version is 6.15 but the package version is just 1.10, so nearly 2 years of development the package wasnt updated. The newer version comes with: - significant faster and better compression engine - ability to create incremental backups - ability to create encrypted archives Also homepage for the project isnt correct anymore, now its: http://mattmahoney.net/dc/zpaq.html On the bottom of the page you find the history of zpaq License is: gplv3 + public domain + mit license The benefient of the archiver is that it can enhanced with custom algorithms that the default decoder will also able to decompress the file, during a intermediate language how to decompress the file. ** Affects: zpaq (Ubuntu) Importance: Undecided Status: New ** Tags: needs-packaging zpaq ** Summary changed: - Zpaq package isnt uptodate (wasnt updated over 2 years) + Zpaq package isnt up to date (wasnt updated over 2 years) ** Description changed: The current version is 6.15 but the package version is just 1.10, so nearly 2 years of development the package wasnt updated. The newer version comes with: - significant faster and better compression engine - ability to create incremental backups - ability to create encrypted archives - - also homepage for the project isnt correct anymore, now its: + Also homepage for the project isnt correct anymore, now its: http://mattmahoney.net/dc/zpaq.html On the bottom of the page you find the history of zpaq License is: gplv3 + public domain + mit license - The benifient of the archiver is that it can so enhanced with custom - algorithmns that the default decoder will also able to decompress the + The benefient of the archiver is that it can enhanced with custom + algorithms that the default decoder will also able to decompress the file, during a intermediate language how to decompress the file. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1074840 Title: Zpaq package isnt up to date (wasnt updated over 2 years) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zpaq/+bug/1074840/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1074840] Re: Zpaq package isnt up to date (wasnt updated over 2 years)
** Description changed: The current version is 6.15 but the package version is just 1.10, so nearly 2 years of development the package wasnt updated. The newer version comes with: - significant faster and better compression engine - ability to create incremental backups - ability to create encrypted archives Also homepage for the project isnt correct anymore, now its: http://mattmahoney.net/dc/zpaq.html On the bottom of the page you find the history of zpaq License is: gplv3 + public domain + mit license The benefient of the archiver is that it can enhanced with custom algorithms that the default decoder will also able to decompress the file, during a intermediate language how to decompress the file. + + Development thread: http://encode.ru/threads/456-zpaq-updates -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1074840 Title: Zpaq package isnt up to date (wasnt updated over 2 years) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zpaq/+bug/1074840/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1074840] Re: Zpaq package isnt up to date (wasnt updated over 2 years)
I dont think so. Which development branch do you mean? The author of zpaq doesnt use any source versioning tool. Why do you think its the end of the Development branch? Version 6.15 is still compartible to 1.10 you can dempress archives which where created with zpaq 1.10 with 6.** and earlier. So I think we dont need a new package for this. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1074840 Title: Zpaq package isnt up to date (wasnt updated over 2 years) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zpaq/+bug/1074840/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 495370] Re: Please upgrade to 3.1.x for lucid
it should be at least updated to version 3.1.2 because of an annoying reshape/grow bug in 3.1.1 -- Please upgrade to 3.1.x for lucid https://bugs.launchpad.net/bugs/495370 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 473471] Re: [needs-packaging] FreeArc
I think its relevant because it doesnt exist a 32bit package or a 64bit package with 32bit depiences there is nothing -- [needs-packaging] FreeArc https://bugs.launchpad.net/bugs/473471 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
