I'm using 8.10 and used the auto upgrade route to get from 8.04. I did
this via the ethernet port and I cannot get the wireless side of things
to work. Here are a couple of text dumps. My system is an NX7400...
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and
945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML
Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1
(rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2
(rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4
(rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
(rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller
(rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI
Controller (rev 01)
02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan]
Network Connection (rev 02)
ubuntu:~$ sudo lshw -C network
*-network
description: Wireless interface
product: PRO/Wireless 3945ABG [Golan] Network Connection
vendor: Intel Corporation
physical id: 0
bus info: [EMAIL PROTECTED]:10:00.0
logical name: wmaster0
version: 02
serial: 00:19:d2:62:be:ea
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list logical ethernet
physical wireless
configuration: broadcast=yes driver=iwl3945 latency=0 module=iwl3945
multicast=yes wireless=IEEE 802.11abg
*-network
description: Ethernet interface
product: BCM4401-B0 100Base-TX
vendor: Broadcom Corporation
physical id: e
bus info: [EMAIL PROTECTED]:02:0e.0
logical name: eth0
version: 02
serial: 00:17:a4:da:42:57
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd
100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=b44
driverversion=2.0 duplex=full ip=192.168.1.104 latency=64 link=yes module=ssb
multicast=yes port=twisted pair speed=100MB/s
*-network DISABLED
description: Ethernet interface
physical id: 1
logical name: pan0
serial: 52:1a:07:ba:59:97
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3
firmware=N/A link=yes multicast=yes
ubuntu:~$
And from the kern.log it talks about the kill switch being on and it
should be turned off?
However, on upgrading to 8.10 at no time has wireless networking been
available on the network connection icon - connection properties doesn't
show a wireless option.
It is in network configuration, but changing those settings doesn't
enable wireless networking.
Regards,
Mac
--
Knetworkmanager not initialize wireless network
https://bugs.launchpad.net/bugs/131953
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
