[Bug 1709135] Re: add bond primary parameter
This bug was fixed in the package nplan - 0.32~16.04.3 --- nplan (0.32~16.04.3) xenial; urgency=medium * tests/integration.py: Really fix skipping test_routes_v6 for the NM backend. nplan (0.32~16.04.2) xenial; urgency=medium * tests/integration.py: Fix test_routes_v6 that I clobbered when I re-applied the skip rules for 16.04 after merging in 0.32. nplan (0.32~16.04.1) xenial; urgency=medium * Backport netplan 0.32 to 16.04. (LP: #1713142) * debian/control: Depend on systemd (>= 229-4ubuntu20) for the PrimarySlave feature backported in that revision. * tests/integration.py: Skip tests that are still not yet supported in xenial nplan (0.32) bionic; urgency=medium * src/nm.c: better handle the UUID generation; the order of iterating through interaces may affect things here. Also make sure the tests catch a null UUID. nplan (0.31) bionic; urgency=medium [ Mathieu Trudel-Lapierre ] * src/nm.c: generate a UUID for a connection only as needed; when we're dealing with NM VLANs. (LP: #1712921) * debian/tests/autostart: Make the autostart test more verbose and avoid failing right from the start when systemd-networkd is disabled. (LP: #1699371) * tests/integration.py: bump the NetworkManager timeout for settling to 120 seconds, autopkgtest infrastructure tends to be a little slow for the network device configuration to be applied and noticed by NM. (LP: #1699371) [ Dimitri John Ledkov ] * Reload udevd to invalidate configuration cache of .rules/.link files as generate step may have changed them. LP: #1669564 [ Dan Streetman ] * Add another interface driver exception to netplan replug to prevent unbind of the Xen VIF interfaces. (LP: #1729573) nplan (0.30) artful; urgency=medium * Add an "optional" syntax node for now to all devices. This is unimplemented for now, but intended to allow users to mark some devices as optional: to make sure they do not delay boot when configured. (LP: #1664844) nplan (0.29) artful; urgency=medium * Fix autopkgtests in a world where /run/NetworkManager/conf.d already exists. nplan is enabled by default, so it might well have the directory already created on the filesystem. nplan (0.28) artful; urgency=medium * Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It broke default network config in LXD and was contrary to the defaults used by the kernel. Reopens LP: 1655440. (LP: #1717404) * Add "accept-ra:" key for all device types; this will default to OFF but allow users to disable processing Router Advertisements when required by their network setup. (LP: #1655440) nplan (0.27) artful; urgency=medium [ Mathieu Trudel-Lapierre ] * Fix crash in systemd generator if called by an user on the command-line * coverage: fix exclusions to properly not cover our "never reached defaults" [ Dimitri John Ledkov ] * tests/integration.py: In teardown, stop systemd-networkd.socket. * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use. (LP: #1717471) * tests/integration.py: fix resolved detection. nplan (0.26) artful; urgency=medium * Bonding: - Add support for specifying a primary slave. (LP: #1709135) * Rebind: - Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting rebind. (LP: #1712224) * Autopkgtests: - Add allow-stderr. Systemd now bleats about a the networkd socket still being around and enabled when we restart the service; but we don't need to care since we're /restarting/ the service to load the new config. - Fix the autostart package to be more sensible: we don't really care if networkd autostarts or not, but we need to make sure that our generator will run at boot, so instead check the state, but only assert it once we've added a config file and before checking the state of our dummy device. - Do a bit more to make sure "mix" tests which stack virtual devices are as reliable as possible; by setting saner defaults. nplan (0.25) artful; urgency=medium * tests/generate.py: add a test to validate that correct blacklist entries are added when creating virtual devices. * tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as the remaining interface and udev configuration can confuse NetworkManager now that it seems to manage random devices it did not create again. (LP: #1699371) * src/nm.c: set the MTU even though we also specify it in systemd-networkd for consumption by udev. NetworkManager will try to set it and might otherwise default to the wrong value. * src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the same config, SLAAC), and don't have static addresses set. This should fix the cases where unconfigured devices still get an IPv6 address. (LP: #1655440) * src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is o
[Bug 1709135] Re: add bond primary parameter
This bug was fixed in the package nplan - 0.32~17.04.1 --- nplan (0.32~17.04.1) zesty; urgency=medium * Backport 0.32 to 17.04. (LP: #1713142) nplan (0.32) bionic; urgency=medium * src/nm.c: better handle the UUID generation; the order of iterating through interaces may affect things here. Also make sure the tests catch a null UUID. nplan (0.31) bionic; urgency=medium [ Mathieu Trudel-Lapierre ] * src/nm.c: generate a UUID for a connection only as needed; when we're dealing with NM VLANs. (LP: #1712921) * debian/tests/autostart: Make the autostart test more verbose and avoid failing right from the start when systemd-networkd is disabled. (LP: #1699371) * tests/integration.py: bump the NetworkManager timeout for settling to 120 seconds, autopkgtest infrastructure tends to be a little slow for the network device configuration to be applied and noticed by NM. (LP: #1699371) [ Dimitri John Ledkov ] * Reload udevd to invalidate configuration cache of .rules/.link files as generate step may have changed them. LP: #1669564 [ Dan Streetman ] * Add another interface driver exception to netplan replug to prevent unbind of the Xen VIF interfaces. (LP: #1729573) nplan (0.30) artful; urgency=medium * Add an "optional" syntax node for now to all devices. This is unimplemented for now, but intended to allow users to mark some devices as optional: to make sure they do not delay boot when configured. (LP: #1664844) nplan (0.29) artful; urgency=medium * Fix autopkgtests in a world where /run/NetworkManager/conf.d already exists. nplan is enabled by default, so it might well have the directory already created on the filesystem. nplan (0.28) artful; urgency=medium * Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It broke default network config in LXD and was contrary to the defaults used by the kernel. Reopens LP: 1655440. (LP: #1717404) * Add "accept-ra:" key for all device types; this will default to OFF but allow users to disable processing Router Advertisements when required by their network setup. (LP: #1655440) nplan (0.27) artful; urgency=medium [ Mathieu Trudel-Lapierre ] * Fix crash in systemd generator if called by an user on the command-line * coverage: fix exclusions to properly not cover our "never reached defaults" [ Dimitri John Ledkov ] * tests/integration.py: In teardown, stop systemd-networkd.socket. * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use. (LP: #1717471) * tests/integration.py: fix resolved detection. nplan (0.26) artful; urgency=medium * Bonding: - Add support for specifying a primary slave. (LP: #1709135) * Rebind: - Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting rebind. (LP: #1712224) * Autopkgtests: - Add allow-stderr. Systemd now bleats about a the networkd socket still being around and enabled when we restart the service; but we don't need to care since we're /restarting/ the service to load the new config. - Fix the autostart package to be more sensible: we don't really care if networkd autostarts or not, but we need to make sure that our generator will run at boot, so instead check the state, but only assert it once we've added a config file and before checking the state of our dummy device. - Do a bit more to make sure "mix" tests which stack virtual devices are as reliable as possible; by setting saner defaults. nplan (0.25) artful; urgency=medium * tests/generate.py: add a test to validate that correct blacklist entries are added when creating virtual devices. * tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as the remaining interface and udev configuration can confuse NetworkManager now that it seems to manage random devices it did not create again. (LP: #1699371) * src/nm.c: set the MTU even though we also specify it in systemd-networkd for consumption by udev. NetworkManager will try to set it and might otherwise default to the wrong value. * src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the same config, SLAAC), and don't have static addresses set. This should fix the cases where unconfigured devices still get an IPv6 address. (LP: #1655440) * src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is otherwise not configured; this follows the same logic as setting IPv6AcceptRA=no in networkd, with the exception that NM does not currently disable RAs. When it does, an unconfigured device for IPv6 will truly be left with no config. nplan (0.24) artful; urgency=medium * debian/control: set Priority to important to make sure we can get into minimal. -- Mathieu Trudel-Lapierre Thu, 16 Nov 2017 10:43:28 -0500 -- You received this bug notification because you are a member of Ubuntu Bugs, wh
[Bug 1709135] Re: add bond primary parameter
Verification-done zesty with 0.32~17.04.01: Tested bond in balance-tlb mode and active-backup mode, both correctly set the primary for the bond. ** Tags removed: verification-needed-zesty ** Tags added: verification-done-zesty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Verification-done xenial with 0.32~16.04.3: Testing bonding in active-backup and balance-tlb mode; in both cases when primary: is set, that device it correctly set to be used as the primary slave, as shown in both /proc/net/bonding/bond0 and /sys/class/net/bond0/bonding/primary. ** Tags removed: verification-needed verification-needed-xenial ** Tags added: verification-done-xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Verification-done-artful with 0.32~17.10.1: Bonding in active-backup mode with primary: set to a suitable device shows the bond with that device set as primary slave. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Hello Ryan, or anyone else affected, Accepted nplan into xenial-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.32~16.04.3 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-xenial to verification-done-xenial. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-xenial. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Tags removed: verification-failed-xenial ** Tags added: verification-needed-xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Autopktests still failing for xenial; the test is still not being skipped (we know it won't work on Xenial due to the version of NM shipped there). Marking verification-failed-xenial. ** Tags removed: verification-needed-xenial ** Tags added: verification-failed-xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Hello Ryan, or anyone else affected, Accepted nplan into xenial-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.32~16.04.2 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-xenial to verification-done-xenial. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-xenial. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Tags removed: verification-failed-xenial ** Tags added: verification-needed-xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
nplan 0.32~16.04.2 fails to build because I mismerged 0.32 and broke the code skipping the test_routes_v6 test in the NetworkManager case. Therefore, it can't possibly pass SRU verification. ** Tags removed: verification-needed-xenial ** Tags added: verification-failed-xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Hello Ryan, or anyone else affected, Accepted nplan into xenial-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.32~16.04.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-xenial to verification-done-xenial. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-xenial. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Tags removed: verification-done-xenial ** Tags added: verification-needed-xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Hello Ryan, or anyone else affected, Accepted nplan into zesty-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.32~17.04.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-zesty to verification-done-zesty. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-zesty. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Tags removed: verification-done verification-done-zesty ** Tags added: verification-needed verification-needed-zesty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
This bug was fixed in the package systemd - 232-21ubuntu7 --- systemd (232-21ubuntu7) zesty; urgency=medium * networkd: accept `:' in ifnames in systemd/networkd. (LP: #1714933) * networkd: add support for ActiveSlave and PrimarySlave netdev options. (LP: #1709135) * Cherrypick upstream fix for a race between .mount and .automount units, which currently may result in automounts hanging. (LP: #1709649) * systemd.postinst: Fix-up version number check in the previous sru. The version check in the postinst was too tight, thus the SRU fix failed validation. (LP: #1710410) systemd (232-21ubuntu6) zesty; urgency=medium * link: Fix offload features initialization. This fixes a regression introduced in v232 which caused TCP segmentation offloads being disabled by default, resulting in significant performance issues under certain conditions. (Closes: #864073) (LP: #1703393) * loginctl: Fix loginctl ignoring user given session IDs at command-line (LP: #1682154) * Disable fallback DNS servers. This causes resolved to call-home to google, attempt to access network when none is available, and spams logs. (LP: #1449001) * initramfs-tools: trigger udevadm add actions with subsystems first. This updates the initramfs-tools init-top udev script to trigger udevadm actions with type specified. This mimicks the systemd-udev-trigger.service. Without type specified only devices are triggered, but triggering subsystems may also be required and should happen before triggering the devices. This is the case for example on s390x with zdev generated udev rules. (LP: #1713536) * Enable systemd-resolved by default. (LP: #1710410) * core: fix systemd failing to serialize tasks correctly on daemon-reload. (LP: #1702823) -- Dimitri John Ledkov Wed, 04 Oct 2017 14:22:02 +0100 ** Changed in: systemd (Ubuntu Zesty) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
We got hit by this as well. Some Ceph nodes lost all networking. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Sounds like maybe that kernel defaults to noarp and we'd want systemd to retain previous behavior? Do you have any sysctl configuration that forces arp state? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Actually there is. Before this update, bond interfaces (specifically 802.3ad) were defaulting to ARP enabled. After the upgrade, they are created with NOARP set on the link. pre-upgrade: eth0: eth1: bond0: post-upgrade: eth0: eth1: bond0: Linux cnode11 4.4.0-97-generic #120-Ubuntu SMP Tue Sep 19 17:28:18 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
I opened LP #1727301 to track this further -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
@Markus Schade Could you please elaborate what you mean? and/or open a new bug with a tag "regression-updates" describing your system? In systemd, the patch which was added is as following: https://git.launchpad.net/~ubuntu-core-dev/+git/systemd/tree/debian/patches/networkd-add-support-to-configure-NOARP-ARP-for-interface.patch?h=ubuntu-xenial&id=b84ef89476003b10da06e9bb7d347f3b1e2098cf Note that whilst Link.ARP setting is added to networkd, there is no change in behavior. It is a tristate, without a default setting, meaning kernel default is used. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
this breaks existing configurations with bonding on upgrading from 229-4ubuntu19 to 229-4ubuntu20 as bond interfaces are now by default configured without ARP. Hence you suddenly lose network connectivity on upgrade. Very bad for a SRU. Plus adding "ARP=yes" to the Link section of a .network file does not work. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
This bug was fixed in the package systemd - 229-4ubuntu20 --- systemd (229-4ubuntu20) xenial; urgency=medium * resolved: recognize DNS names with more than one trailing dot as invalid (LP: #160) * Ignore failures to set Nice priority on services in containers. (LP: #1709536) * networkd: accept `:' in ifnames in systemd/networkd. (LP: #1714933) * initramfs-tools: trigger udevadm add actions with subsystems first. (LP: #1713536) * networkd: Add support to set STP value on a bridge. (LP: #1665088) * networkd: add support for AgeingTImeSec, Priority and DefaultPVID settings. (LP: #1715131) - Drop cherrypick of uint16 config parser, superseeded by above commit. * networkd: add support to set ActiveSlave and PrimarySlave. (LP: #1709135) - networkd: add support to configure ARP, depedency of Primary/ActiveSlave. -- Dimitri John Ledkov Tue, 05 Sep 2017 14:01:51 +0100 ** Changed in: systemd (Ubuntu Xenial) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
# dpkg-query -W systemd nplan nplan 0.23~16.04.1 systemd 229-4ubuntu19 # netplan generate Error in network definition //etc/netplan/bond-primary.yaml line 13 column 8: unknown key primary Enabled proposed, retweaked netplan to have correct interface names # dpkg-query -W systemd nplan nplan 0.29~16.04.1 systemd 229-4ubuntu20 root@srux:~# netplan generate root@srux:~# echo $? 0 My current netplan is $ cat /etc/netplan/bond.yaml network: version: 2 ethernets: ens7: match: name: ens7 ens8: match: name: ens8 bonds: bond1: interfaces: [ ens7, ens8 ] parameters: mode: active-backup mii-monitor-interval: 100 primary: ens8 dhcp4: true Active slave is ens8. Changing netplan primary to ens7, and re-running apply changes the active slave. ** Tags removed: verification-needed-xenial ** Tags added: verification-done-xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
$ sudo netplan apply Error in network definition //etc/netplan/bond.yaml line 13 column 8: unknown key primary $ dpkg-query -W nplan systemd nplan 0.23~17.04.1 systemd 232-21ubuntu5 $ sudo netplan apply $ echo $? 0 $ dpkg-query -W systemd nplan nplan 0.29~17.04.1 systemd 232-21ubuntu7 Bond is up, changing primary setting in netplan and executing apply, changes the active_slave. ** Tags removed: verification-needed verification-needed-zesty ** Tags added: verification-done verification-done-zesty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Hello Ryan, or anyone else affected, Accepted nplan into xenial-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.29~16.04.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-xenial to verification-done-xenial. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-xenial. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Changed in: nplan (Ubuntu Xenial) Status: Triaged => Fix Committed ** Tags removed: verification-done-xenial ** Tags added: verification-needed-xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Hello Ryan, or anyone else affected, Accepted nplan into zesty-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.29~17.04.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-zesty to verification-done-zesty. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-zesty. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Changed in: nplan (Ubuntu Zesty) Status: Triaged => Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Hello Ryan, or anyone else affected, Accepted systemd into zesty-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/systemd/232-21ubuntu7 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-zesty to verification-done-zesty. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-zesty. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Changed in: systemd (Ubuntu Zesty) Status: In Progress => Fix Committed ** Tags removed: verification-done ** Tags added: verification-needed verification-needed-zesty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
note that one cannot really use bond0 as it will be auto created and networkd may loose the race to configure it. it is safer to use bond1 until a bugfix is SRUed to set max_bond to zero by default. pre-tested with artful's netplan on zesty with a backrported systemd. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Installed nplan 0.29 from artful to get it process the test-case yaml, to then test networkd portion is working right. Using: # cat /etc/netplan/bond-primary.yaml network: version: 2 ethernets: eth0: match: name: eth0 dummy0: match: driver: dummy bonds: bond0: interfaces: [eth0, dummy0] parameters: mode: active-backup mii-monitor-interval: 100 primary: eth0 dhcp4: true 229-4ubuntu19 Oct 02 15:37:21 test-upgrade systemd-networkd[1773]: [/run/systemd/network/10-netplan-eth0.network:8] Unknown lvalue 'PrimarySlave' in section 'Network' Oct 02 15:37:21 test-upgrade systemd-networkd[1773]: bond0: IPv6 enabled for interface: Success 229-4ubuntu20 Oct 02 15:39:22 test-upgrade systemd[1]: Starting Network Service... Oct 02 15:39:22 test-upgrade systemd-networkd[3821]: bond0: IPv6 enabled for interface: Success Oct 02 15:39:22 test-upgrade systemd-networkd[3821]: bond0: netdev ready Oct 02 15:39:22 test-upgrade systemd-networkd[3821]: eth0: Gained IPv6LL Oct 02 15:39:22 test-upgrade systemd-networkd[3821]: Enumeration completed Oct 02 15:39:22 test-upgrade systemd[1]: Started Network Service. All is good. ** Tags removed: verification-needed verification-needed-xenial ** Tags added: verification-done verification-done-xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
verification is done for the systemd portion of the bug. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
** Description changed: [Impact] Some complex bond configurations require setting a "primary" interface for the bond, or setting this greatly improves performance on the network bond. [Test case] See below for a configuration example. 1) Apply configuration on a system with netplan. 2) Run 'netplan apply' 3) Validate that netplan apply does not return with an error 4) Validate that netplan properly sets the "primary_slave" value on the bond. This can be verified by looking at /sys/class/net//bonding/primary_slave. 5) Validate that there are no parsing errors from systemd-networkd in the journalctl [Regression potential] If existing configuration fails to be parsed, or lack of primary interface breaks configuration for existing bonds, this would be a regression caused by this update. --- ifenslave/eni support a bond parameter: bond-primary which accepts an interface name that can be used to tell the kernel bonding driver which interface it should preferred in active-backup (and other modes). This config option is missing in netplan. % cat bond-primary.yaml - ethernets: + network: version: 2 ethernets: eth0: match: driver: virtio ens4: match: driver: e1000 bonds: bond0: parameters: mode: active-backup mii-monitor-interval: 100 primary: e1000 dhcp4: true % ./generate -r `pwd`/target Error in network definition /home/rharper/work/git/netplan/target//etc/netplan/bond-primary.yaml line 12 column 8: unknown key primary -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
** Tags added: id-5988c348d036b6f6acb1e389 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
** Tags added: id-5988c3a877d5e440aecf0c3a -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Hello Ryan, or anyone else affected, Accepted systemd into xenial-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/systemd/229-4ubuntu20 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-xenial to verification-done-xenial. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-xenial. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Changed in: systemd (Ubuntu Xenial) Status: Confirmed => Fix Committed ** Tags added: verification-needed verification-needed-xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
** Description changed: [Impact] Some complex bond configurations require setting a "primary" interface for the bond, or setting this greatly improves performance on the network bond. [Test case] See below for a configuration example. 1) Apply configuration on a system with netplan. 2) Run 'netplan apply' 3) Validate that netplan apply does not return with an error 4) Validate that netplan properly sets the "primary_slave" value on the bond. This can be verified by looking at /sys/class/net//bonding/primary_slave. + 5) Validate that there are no parsing errors from systemd-networkd in the journalctl [Regression potential] If existing configuration fails to be parsed, or lack of primary interface breaks configuration for existing bonds, this would be a regression caused by this update. --- ifenslave/eni support a bond parameter: bond-primary which accepts an interface name that can be used to tell the kernel bonding driver which interface it should preferred in active-backup (and other modes). This config option is missing in netplan. % cat bond-primary.yaml ethernets: version: 2 ethernets: eth0: match: driver: virtio ens4: match: driver: e1000 bonds: bond0: parameters: mode: active-backup mii-monitor-interval: 100 primary: e1000 dhcp4: true % ./generate -r `pwd`/target Error in network definition /home/rharper/work/git/netplan/target//etc/netplan/bond-primary.yaml line 12 column 8: unknown key primary -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Staged for zesty at: https://git.launchpad.net/~ubuntu-core- dev/+git/systemd/commit/?id=608838c764f1bce9ad0b506ec40bd15a7df3bcc8 ** Changed in: systemd (Ubuntu Zesty) Status: Fix Released => Triaged ** Changed in: systemd (Ubuntu Xenial) Status: New => Confirmed ** Changed in: systemd (Ubuntu Zesty) Status: Triaged => In Progress -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
** Description changed: + [Impact] + Some complex bond configurations require setting a "primary" interface for the bond, or setting this greatly improves performance on the network bond. + + [Test case] + See below for a configuration example. + 1) Apply configuration on a system with netplan. + 2) Run 'netplan apply' + 3) Validate that netplan apply does not return with an error + 4) Validate that netplan properly sets the "primary_slave" value on the bond. This can be verified by looking at /sys/class/net//bonding/primary_slave. + + [Regression potential] + If existing configuration fails to be parsed, or lack of primary interface breaks configuration for existing bonds, this would be a regression caused by this update. + + --- + ifenslave/eni support a bond parameter: bond-primary which accepts an interface name that can be used to tell the kernel bonding driver which interface it should preferred in active-backup (and other modes). This config option is missing in netplan. - % cat bond-primary.yaml + % cat bond-primary.yaml ethernets: - version: 2 - ethernets: - eth0: - match: - driver: virtio - ens4: - match: - driver: e1000 - bonds: - bond0: - parameters: - mode: active-backup - mii-monitor-interval: 100 - primary: e1000 - dhcp4: true + version: 2 + ethernets: + eth0: + match: + driver: virtio + ens4: + match: + driver: e1000 + bonds: + bond0: + parameters: + mode: active-backup + mii-monitor-interval: 100 + primary: e1000 + dhcp4: true - % ./generate -r `pwd`/target + % ./generate -r `pwd`/target Error in network definition /home/rharper/work/git/netplan/target//etc/netplan/bond-primary.yaml line 12 column 8: unknown key primary -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
This bug was fixed in the package nplan - 0.26 --- nplan (0.26) artful; urgency=medium * Bonding: - Add support for specifying a primary slave. (LP: #1709135) * Rebind: - Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting rebind. (LP: #1712224) * Autopkgtests: - Add allow-stderr. Systemd now bleats about a the networkd socket still being around and enabled when we restart the service; but we don't need to care since we're /restarting/ the service to load the new config. - Fix the autostart package to be more sensible: we don't really care if networkd autostarts or not, but we need to make sure that our generator will run at boot, so instead check the state, but only assert it once we've added a config file and before checking the state of our dummy device. - Do a bit more to make sure "mix" tests which stack virtual devices are as reliable as possible; by setting saner defaults. -- Mathieu Trudel-Lapierre Wed, 23 Aug 2017 19:32:33 -0400 ** Changed in: nplan (Ubuntu Artful) Status: Triaged => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
Sounds like we'd need to add a key under parameters: for the bond device, as per the original description (but the device needs to be listed in 'interfaces', and exist in the list of interfaces defined in netplan: ethernets: version: 2 ethernets: eth0: match: driver: virtio ens4: match: driver: e1000 bonds: bond0: interfaces: [ eth0, ens4 ] parameters: mode: active-backup mii-monitor-interval: 100 primary: ens4 dhcp4: true This will require backporting the feature from systemd to the releases where we need this (to xenial). ** Also affects: systemd (Ubuntu) Importance: Undecided Status: New ** Also affects: systemd (Ubuntu Xenial) Importance: Undecided Status: New ** Also affects: nplan (Ubuntu Xenial) Importance: Undecided Status: New ** Also affects: systemd (Ubuntu Artful) Importance: Undecided Status: New ** Also affects: nplan (Ubuntu Artful) Importance: High Assignee: Mathieu Trudel-Lapierre (cyphermox) Status: Triaged ** Also affects: systemd (Ubuntu Zesty) Importance: Undecided Status: New ** Also affects: nplan (Ubuntu Zesty) Importance: Undecided Status: New ** Changed in: systemd (Ubuntu Zesty) Status: New => Fix Released ** Changed in: systemd (Ubuntu Artful) Status: New => Fix Released ** Changed in: systemd (Ubuntu Xenial) Assignee: (unassigned) => Dimitri John Ledkov (xnox) ** Changed in: nplan (Ubuntu Xenial) Status: New => Triaged ** Changed in: nplan (Ubuntu Zesty) Status: New => Triaged ** Changed in: nplan (Ubuntu Zesty) Importance: Undecided => High ** Changed in: nplan (Ubuntu Xenial) Importance: Undecided => High ** Changed in: nplan (Ubuntu Zesty) Assignee: (unassigned) => Mathieu Trudel-Lapierre (cyphermox) ** Changed in: nplan (Ubuntu Xenial) Assignee: (unassigned) => Mathieu Trudel-Lapierre (cyphermox) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
** Changed in: nplan (Ubuntu) Importance: Undecided => High ** Changed in: nplan (Ubuntu) Status: New => Triaged ** Changed in: nplan (Ubuntu) Milestone: None => ubuntu-17.08 ** Changed in: nplan (Ubuntu) Assignee: (unassigned) => Mathieu Trudel-Lapierre (cyphermox) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1709135] Re: add bond primary parameter
This maps to networkd Bond config parameter: PrimarySlave= -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1709135 Title: add bond primary parameter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1709135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs