[Bug 1827750] Re: Not boot with EFI
This bug was fixed in the package linux-raspi2 - 5.0.0-1013.13 --- linux-raspi2 (5.0.0-1013.13) disco; urgency=medium * linux-raspi2: 5.0.0-1013.13 -proposed tracker (LP: #1834884) * [SRU][B/B-OEM/C/D/OEM-OSP1] Add RTL8822 wifi driver rtw88 (LP: #1831828) - raspi2: [Config] Add realtek wifi RTW88 support * AX88772A USB to Ethernet dongle doesn't work (LP: #1834114) - raspi2: [Config] Rename ASIX module * Load average inexplicably high with 5.0 kernel on rpi (LP: #1825235) // Refresh RaspberryPi BSP (LP: #1831219) - raspberrypi: remove the old RaspberryPi BSP - arm: partially revert 702b94bff3c50542a6e4ab9a4f4cef093262fe65 - Revert "rtc: pcf8523: properly handle oscillator stop bit" - smsx95xx: fix crimes against truesize - smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default - Allow mac address to be set in smsc95xx - Protect __release_resource against resources without parents - irq-bcm2836: Prevent spurious interrupts, and trap them early - irq-bcm2836: Avoid "Invalid trigger warning" - irqchip: bcm2835: Add FIQ support - irqchip: irq-bcm2835: Add 2836 FIQ support - spi: spidev: Completely disable the spidev warning - dmaengine: bcm2835: Load driver early and support legacy API - firmware: Updated mailbox header - rtc: Add SPI alias for pcf2123 driver - watchdog: bcm2835: Support setting reboot partition - reboot: Use power off rather than busy spinning when halt is requested - bcm: Make RASPBERRYPI_POWER depend on PM - Register the clocks early during the boot process, so that special/critical clocks can get enabled early on in the boot process avoiding the risk of disabling a clock, pll_divider or pll when a claiming driver fails to install propperly - maybe it needs to defer. - bcm2835-rng: Avoid initialising if already enabled - clk-bcm2835: Mark used PLLs and dividers CRITICAL - clk-bcm2835: Add claim-clocks property - clk-bcm2835: Read max core clock from firmware - clk: bcm2835: Mark GPIO clocks enabled at boot as critical. - sound: Demote deferral errors to INFO level - Update vfpmodule.c - i2c: bcm2835: Add debug support - mm: Remove the PFN busy warning - ASoC: Add prompt for ICS43432 codec - irqchip: irq-bcm2836: Remove regmap and syscon use - lan78xx: Enable LEDs and auto-negotiation - amba_pl011: Don't use DT aliases for numbering - amba_pl011: Round input clock up - amba_pl011: Insert mb() for correct FIFO handling - amba_pl011: Add cts-event-workaround DT property - pinctrl-bcm2835: Set base to 0 give expected gpio numbering - Main bcm2708/bcm2709 linux port - Add dwc_otg driver - bcm2708 framebuffer driver - fbdev: add FBIOCOPYAREA ioctl - Speed up console framebuffer imageblit function - dmaengine: Add support for BCM2708 - MMC: added alternative MMC driver - Adding bcm2835-sdhost driver, and an overlay to enable it - vc_mem: Add vc_mem driver for querying firmware memory addresses - vcsm: VideoCore shared memory service for BCM2835 - Add /dev/gpiomem device for rootless user GPIO access - Add SMI driver - MISC: bcm2835: smi: use clock manager and fix reload issues - Add SMI NAND driver - Revert "Add SMI NAND driver" - Add cpufreq driver - Add Chris Boot's i2c driver - char: broadcom: Add vcio module - firmware: bcm2835: Support ARCH_BCM270x - scripts: Add mkknlimg and knlinfo scripts from tools repo - BCM2708: Add core Device Tree support - BCM270x_DT: Add pwr_led, and the required "input" trigger - Added Device IDs for August DVB-T 205 - Improve __copy_to_user and __copy_from_user performance - gpio-poweroff: Allow it to work on Raspberry Pi - mfd: Add Raspberry Pi Sense HAT core driver - ASoC: pcm512x: implement set_tdm_slot interface - ASoC: Add support for Rpi-DAC - Add IQaudIO Sound Card support for Raspberry Pi - Added support for HiFiBerry DAC+ - Added driver for HiFiBerry Amp amplifier add-on board - Add driver for rpi-proto - Add Support for JustBoom Audio boards - New AudioInjector.net Pi soundcard with low jitter audio in and out. - New driver for RRA DigiDAC1 soundcard using WM8741 + WM8804 - Add support for Dion Audio LOCO DAC-AMP HAT - Allo Piano DAC boards: Initial 2 channel (stereo) support (#1645 - Add support for Allo Piano DAC 2.1 plus add-on board for Raspberry Pi. - Add support for Allo Boss DAC add-on board for Raspberry Pi. (#1924 - Support for Blokas Labs pisound board - ASoC: Add driver for Cirrus Logic Audio Card - sound: Support for Dion Audio LOCO-V2 DAC-AMP HAT - Add support for Fe-Pi audio sound card. (#1867 - Add support for the AudioInjector.net Octo sound card - Driver support for Google voiceHAT soundcard. - Driver and overlay for Allo Katana DAC -
[Bug 1827750] Re: Not boot with EFI
This bug was fixed in the package linux-raspi2 - 5.0.0-1013.13 --- linux-raspi2 (5.0.0-1013.13) disco; urgency=medium * linux-raspi2: 5.0.0-1013.13 -proposed tracker (LP: #1834884) * [SRU][B/B-OEM/C/D/OEM-OSP1] Add RTL8822 wifi driver rtw88 (LP: #1831828) - raspi2: [Config] Add realtek wifi RTW88 support * AX88772A USB to Ethernet dongle doesn't work (LP: #1834114) - raspi2: [Config] Rename ASIX module * Load average inexplicably high with 5.0 kernel on rpi (LP: #1825235) // Refresh RaspberryPi BSP (LP: #1831219) - raspberrypi: remove the old RaspberryPi BSP - arm: partially revert 702b94bff3c50542a6e4ab9a4f4cef093262fe65 - Revert "rtc: pcf8523: properly handle oscillator stop bit" - smsx95xx: fix crimes against truesize - smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default - Allow mac address to be set in smsc95xx - Protect __release_resource against resources without parents - irq-bcm2836: Prevent spurious interrupts, and trap them early - irq-bcm2836: Avoid "Invalid trigger warning" - irqchip: bcm2835: Add FIQ support - irqchip: irq-bcm2835: Add 2836 FIQ support - spi: spidev: Completely disable the spidev warning - dmaengine: bcm2835: Load driver early and support legacy API - firmware: Updated mailbox header - rtc: Add SPI alias for pcf2123 driver - watchdog: bcm2835: Support setting reboot partition - reboot: Use power off rather than busy spinning when halt is requested - bcm: Make RASPBERRYPI_POWER depend on PM - Register the clocks early during the boot process, so that special/critical clocks can get enabled early on in the boot process avoiding the risk of disabling a clock, pll_divider or pll when a claiming driver fails to install propperly - maybe it needs to defer. - bcm2835-rng: Avoid initialising if already enabled - clk-bcm2835: Mark used PLLs and dividers CRITICAL - clk-bcm2835: Add claim-clocks property - clk-bcm2835: Read max core clock from firmware - clk: bcm2835: Mark GPIO clocks enabled at boot as critical. - sound: Demote deferral errors to INFO level - Update vfpmodule.c - i2c: bcm2835: Add debug support - mm: Remove the PFN busy warning - ASoC: Add prompt for ICS43432 codec - irqchip: irq-bcm2836: Remove regmap and syscon use - lan78xx: Enable LEDs and auto-negotiation - amba_pl011: Don't use DT aliases for numbering - amba_pl011: Round input clock up - amba_pl011: Insert mb() for correct FIFO handling - amba_pl011: Add cts-event-workaround DT property - pinctrl-bcm2835: Set base to 0 give expected gpio numbering - Main bcm2708/bcm2709 linux port - Add dwc_otg driver - bcm2708 framebuffer driver - fbdev: add FBIOCOPYAREA ioctl - Speed up console framebuffer imageblit function - dmaengine: Add support for BCM2708 - MMC: added alternative MMC driver - Adding bcm2835-sdhost driver, and an overlay to enable it - vc_mem: Add vc_mem driver for querying firmware memory addresses - vcsm: VideoCore shared memory service for BCM2835 - Add /dev/gpiomem device for rootless user GPIO access - Add SMI driver - MISC: bcm2835: smi: use clock manager and fix reload issues - Add SMI NAND driver - Revert "Add SMI NAND driver" - Add cpufreq driver - Add Chris Boot's i2c driver - char: broadcom: Add vcio module - firmware: bcm2835: Support ARCH_BCM270x - scripts: Add mkknlimg and knlinfo scripts from tools repo - BCM2708: Add core Device Tree support - BCM270x_DT: Add pwr_led, and the required "input" trigger - Added Device IDs for August DVB-T 205 - Improve __copy_to_user and __copy_from_user performance - gpio-poweroff: Allow it to work on Raspberry Pi - mfd: Add Raspberry Pi Sense HAT core driver - ASoC: pcm512x: implement set_tdm_slot interface - ASoC: Add support for Rpi-DAC - Add IQaudIO Sound Card support for Raspberry Pi - Added support for HiFiBerry DAC+ - Added driver for HiFiBerry Amp amplifier add-on board - Add driver for rpi-proto - Add Support for JustBoom Audio boards - New AudioInjector.net Pi soundcard with low jitter audio in and out. - New driver for RRA DigiDAC1 soundcard using WM8741 + WM8804 - Add support for Dion Audio LOCO DAC-AMP HAT - Allo Piano DAC boards: Initial 2 channel (stereo) support (#1645 - Add support for Allo Piano DAC 2.1 plus add-on board for Raspberry Pi. - Add support for Allo Boss DAC add-on board for Raspberry Pi. (#1924 - Support for Blokas Labs pisound board - ASoC: Add driver for Cirrus Logic Audio Card - sound: Support for Dion Audio LOCO-V2 DAC-AMP HAT - Add support for Fe-Pi audio sound card. (#1867 - Add support for the AudioInjector.net Octo sound card - Driver support for Google voiceHAT soundcard. - Driver and overlay for Allo Katana DAC -
[Bug 1827750] Re: Not boot with EFI
This bug was fixed in the package linux-raspi2 - 4.15.0-1041.44 --- linux-raspi2 (4.15.0-1041.44) bionic; urgency=medium * linux-raspi2: 4.15.0-1041.44 -proposed tracker (LP: #1834923) * Not boot with EFI (LP: #1827750) - [Config] enable EFI support [ Ubuntu: 4.15.0-55.60 ] * linux: 4.15.0-55.60 -proposed tracker (LP: #1834954) * Request backport of ceph commits into bionic (LP: #1834235) - ceph: use atomic_t for ceph_inode_info::i_shared_gen - ceph: define argument structure for handle_cap_grant - ceph: flush pending works before shutdown super - ceph: send cap releases more aggressively - ceph: single workqueue for inode related works - ceph: avoid dereferencing invalid pointer during cached readdir - ceph: quota: add initial infrastructure to support cephfs quotas - ceph: quota: support for ceph.quota.max_files - ceph: quota: don't allow cross-quota renames - ceph: fix root quota realm check - ceph: quota: support for ceph.quota.max_bytes - ceph: quota: update MDS when max_bytes is approaching - ceph: quota: add counter for snaprealms with quota - ceph: avoid iput_final() while holding mutex or in dispatch thread * QCA9377 isn't being recognized sometimes (LP: #1757218) - SAUCE: USB: Disable USB2 LPM at shutdown * hns: fix ICMP6 neighbor solicitation messages discard problem (LP: #1833140) - net: hns: fix ICMP6 neighbor solicitation messages discard problem - net: hns: fix unsigned comparison to less than zero * Fix occasional boot time crash in hns driver (LP: #1833138) - net: hns: Fix probabilistic memory overwrite when HNS driver initialized * use-after-free in hns_nic_net_xmit_hw (LP: #1833136) - net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw() * hns: attempt to restart autoneg when disabled should report error (LP: #1833147) - net: hns: Restart autoneg need return failed when autoneg off * systemd 237-3ubuntu10.14 ADT test failure on Bionic ppc64el (test-seccomp) (LP: #1821625) - powerpc: sys_pkey_alloc() and sys_pkey_free() system calls - powerpc: sys_pkey_mprotect() system call * [UBUNTU] pkey: Indicate old mkvp only if old and curr. mkvp are different (LP: #1832625) - pkey: Indicate old mkvp only if old and current mkvp are different * [UBUNTU] kernel: Fix gcm-aes-s390 wrong scatter-gather list processing (LP: #1832623) - s390/crypto: fix gcm-aes-s390 selftest failures * System crashes on hot adding a core with drmgr command (4.15.0-48-generic) (LP: #1833716) - powerpc/numa: improve control of topology updates - powerpc/numa: document topology_updates_enabled, disable by default * Kernel modules generated incorrectly when system is localized to a non- English language (LP: #1828084) - scripts: override locale from environment when running recordmcount.pl * [UBUNTU] kernel: Fix wrong dispatching for control domain CPRBs (LP: #1832624) - s390/zcrypt: Fix wrong dispatching for control domain CPRBs * CVE-2019-11815 - net: rds: force to destroy connection if t_sock is NULL in rds_tcp_kill_sock(). * Sound device not detected after resume from hibernate (LP: #1826868) - drm/i915: Force 2*96 MHz cdclk on glk/cnl when audio power is enabled - drm/i915: Save the old CDCLK atomic state - drm/i915: Remove redundant store of logical CDCLK state - drm/i915: Skip modeset for cdclk changes if possible * Handle overflow in proc_get_long of sysctl (LP: #1833935) - sysctl: handle overflow in proc_get_long * Dell XPS 13 (9370) defaults to s2idle sleep/suspend instead of deep, NVMe drains lots of power under s2idle (LP: #1808957) - Revert "UBUNTU: SAUCE: pci/nvme: prevent WDC PC SN720 NVMe from entering D3 and being disabled" - Revert "UBUNTU: SAUCE: nvme: add quirk to not call disable function when suspending" - Revert "UBUNTU: SAUCE: pci: prevent Intel NVMe SSDPEKKF from entering D3" - Revert "SAUCE: nvme: add quirk to not call disable function when suspending" - Revert "SAUCE: pci: prevent sk hynix nvme from entering D3" - PCI: PM: Avoid possible suspend-to-idle issue - PCI: PM: Skip devices in D0 for suspend-to-idle - nvme-pci: Sync queues on reset - nvme: Export get and set features - nvme-pci: Use host managed power state for suspend * linux v4.15 ftbfs on a newer host kernel (e.g. hwe) (LP: #1823429) - selinux: use kernel linux/socket.h for genheaders and mdp * 32-bit x86 kernel 4.15.0-50 crash in vmalloc_sync_all (LP: #1830433) - x86/mm/pat: Disable preemption around __flush_tlb_all() - x86/mm: Drop usage of __flush_tlb_all() in kernel_physical_mapping_init() - x86/mm: Disable ioremap free page handling on x86-PAE - ioremap: Update pgtable free interfaces with addr - x86/mm: Add TLB purge to free pmd/pte page interfaces - x86/init: fix build with CONFIG_SWAP=n - x86/mm:
[Bug 1827750] Re: Not boot with EFI
** Changed in: linux-raspi2 (Ubuntu Cosmic) Status: In Progress => Fix Committed ** Changed in: linux-raspi2 (Ubuntu Disco) Status: In Progress => Fix Committed ** Changed in: linux-raspi2 (Ubuntu Bionic) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/1827750 Title: Not boot with EFI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1827750/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1827750] Re: Not boot with EFI
** Also affects: linux-raspi2 (Ubuntu Disco) Importance: Undecided Status: New ** Also affects: linux-raspi2 (Ubuntu Cosmic) Importance: Undecided Status: New ** Also affects: linux-raspi2 (Ubuntu Bionic) Importance: Undecided Status: New ** Changed in: linux-raspi2 (Ubuntu Bionic) Status: New => In Progress ** Changed in: linux-raspi2 (Ubuntu Cosmic) Status: New => In Progress ** Changed in: linux-raspi2 (Ubuntu Disco) Status: New => In Progress -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/1827750 Title: Not boot with EFI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1827750/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1827750] Re: Not boot with EFI
** Description changed: + Impact: + + The linux-raspi2 kernel doesn't have the necessary UEFI hooks to boot on + a UEFI enabled system. + + Fix: + + Enable the relevant UEFI options (see the attached patch). + + How to test: + + On a patched kernel, UEFI presence will be check during boot: + + $ dmesg | grep -i eufi + ... + [0.00] efi: UEFI not found. + ... + + Regression potential: + + Very low, some config option changes that have been enabled in generic + for a long while. + + -- + Hello. I can't boot with linux-raspi2 kernel, but linux-generic work fine. Please add support kernel option CONFIG_U(EFI)_STUB=y as default. Thanks. os: ubuntu 18.04 lts arm64 hw: raspberry pi 3b (+ tiano core uefi) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/1827750 Title: Not boot with EFI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1827750/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1827750] Re: Not boot with EFI
Take care, current kernel 4.15.0-1036.38 still not bootable with EFI. ** Changed in: linux-raspi2 (Ubuntu) Status: Fix Committed => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/1827750 Title: Not boot with EFI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1827750/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1827750] Re: Not boot with EFI
FYI the mainline arm64 kernels at https://kernel.ubuntu.com/~kernel- ppa/mainline/v5.1.1/ boot on the 3B running arm64 on disco, with grub- efi-arm64-bin installed and a commandline of modprobe.blacklist=vc,vc4 (but I haven't tried without using the module blacklist for some time.) Since the default RPI bootloader doesn't seem to handle kernels with an EFI stub though, enabling the EFI stub will cause boot problems on kernels using the built-in RPI bootloader, no? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/1827750 Title: Not boot with EFI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1827750/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1827750] Re: Not boot with EFI
** Tags added: efi raspberry raspi2 uefi ** Tags added: raspberrypi -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1827750 Title: Not boot with EFI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1827750/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1827750] Re: Not boot with EFI
** Changed in: linux-raspi2 (Ubuntu) Status: Incomplete => Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1827750 Title: Not boot with EFI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1827750/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1827750] Re: Not boot with EFI
System started, but I can't parse temperature. CPU freq info work fine. cat: /sys/class/thermal/thermal_zone0/temp: No such file or directory -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1827750 Title: Not boot with EFI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1827750/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1827750] Re: Not boot with EFI
Copied out that package, try again. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1827750 Title: Not boot with EFI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1827750/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1827750] Re: Not boot with EFI
Dependency error of linux-headers-4.15.0-1035-raspi2 package. This is required itself. dpkg: package dependencies do not allow configuring the linux-headers-4.15.0-1035-raspi2 package: linux-headers-4.15.0-1035-raspi2 depends on linux-raspi2-headers-4.15.0-1035, however: The linux-raspi2-headers-4.15.0-1035 package is not installed. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1827750 Title: Not boot with EFI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1827750/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1827750] Re: Not boot with EFI
** Changed in: linux-raspi2 (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1827750 Title: Not boot with EFI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1827750/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1827750] Re: Not boot with EFI
Please test this kernel and tell us if it solves you problem: https://people.canonical.com/~ppisati/lp1827750/ This kernel has EFI support (and several other EFI features) enabled: https://git.launchpad.net/~p-pisati/ubuntu/+source/linux/commit/?h=b-raspi2-lp1827750=ce621b56138a15dd3c67d6b40429f5739a6b51ec Once positively verified, add a step by step test procedure to this bug so we can move forward with integrating the changes. ** Changed in: linux-raspi2 (Ubuntu) Assignee: (unassigned) => Paolo Pisati (p-pisati) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1827750 Title: Not boot with EFI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1827750/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
