[Bug 281402] Re: display problem
** Changed in: xserver-xorg-video-intel (Ubuntu) Status: Incomplete = Confirmed -- display problem https://bugs.launchpad.net/bugs/281402 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281402] Re: display problem
Well... after another fresh install of 8.04.1 LTS I am not upgrading xorg... I am paranoid now... Still here's my lspci -vvnn:- But I do face issues now and then when playing games... the display moves in circles or just blanks out completely... I have to do a warm boot to resolve it... and do a fix XSERVER to get back my resolution... 00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 01) Subsystem: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort+ SERR- PERR- Latency: 0 Region 0: Memory at fc00 (32-bit, prefetchable) [size=32M] Capabilities: [e4] Vendor Specific Information 00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev 01) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Unknown device [8086:5641] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f000 (32-bit, prefetchable) [size=128M] Region 1: Memory at ffa8 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Unknown device [8086:5641] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e800 [size=32] 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Unknown device [8086:5641] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at e880 [size=32] 00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Unknown device [8086:5641] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ec00 [size=32] 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Unknown device [8086:5641] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ Capabilities: [58] Debug port 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 81) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR+ Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: ff80-ff8f Prefetchable memory behind bridge: eaa0-eaaf Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort+ SERR- PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- Reset- FastB2B- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 01) Control: I/O+ Mem+
[Bug 281402] Re: display problem
[This is an automated message] Hi hansum-rahul, Please attach the output of `lspci -vvnn` too. ** Changed in: xserver-xorg-video-intel (Ubuntu) Status: New = Incomplete -- display problem https://bugs.launchpad.net/bugs/281402 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281402] Re: display problem
It's actually the default behaviour to not use the maximum resolution, because the refresh rate is usually lower than desired.. ** Changed in: xserver-xorg-video-intel (Ubuntu) Sourcepackagename: xorg-server = xserver-xorg-video-intel -- display problem https://bugs.launchpad.net/bugs/281402 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281402] Re: display problem
** Changed in: xorg-server (Ubuntu) Status: Confirmed = New -- display problem https://bugs.launchpad.net/bugs/281402 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281402] Re: display problem
I have the exact same problem (maximum resolution being 1024x768 not 1152x864) on Ubuntu 8.10, monitor SAMTRON 56V 15, Intel 865G on-board graphics. Moreover, System-Preferences-Screen Resolution dubs my monitor 'SAMSUNG 14', not SAMTRON 56V 15. It also doesn't make any resolution 1024x864 available, while I was using 1152x864 in MS Windows before I switched. Please resolve this problem as 1152x864 is the only resolution that enables me to use 100dpi resolution. -- display problem https://bugs.launchpad.net/bugs/281402 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281402] Re: display problem
Aww-right my xrandr and ddcprobe outputs don't match! This is Xrandr: --- Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1024 x 1024 VGA connected 1024x768+0+0 (normal left inverted right x axis y axis) 267mm x 200mm 800x60085.1 + 85.0 85.1 72.2 75.0 60.3 56.2 1024x768 60.0*60.0 832x62474.6 640x48085.0 85.0 75.0 72.8 75.0 60.0 59.9 720x40085.0 70.1 640x40085.1 640x35085.1 - and sudo ddcprobe crashes my computer if I run it a second time... so as of now I am not doing it. But ddcprobe correctly detects 1152x864 resolution. -- display problem https://bugs.launchpad.net/bugs/281402 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281402] Re: display problem
00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 01) Subsystem: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort+ SERR- PERR- INTx- Latency: 0 Region 0: Memory at fc00 (32-bit, prefetchable) [size=32M] Capabilities: [e4] Vendor Specific Information ? Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev 01) Subsystem: Intel Corporation Device [8086:5641] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f000 (32-bit, prefetchable) [size=128M] Region 1: Memory at ffa8 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: intelfb 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) Subsystem: Intel Corporation Device [8086:5641] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e800 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) Subsystem: Intel Corporation Device [8086:5641] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e880 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) Subsystem: Intel Corporation Device [8086:5641] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ec00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20) Subsystem: Intel Corporation Device [8086:5641] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=0080 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 81) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR+ INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: ff80-ff8f Prefetchable memory behind bridge: eaa0-eaaf Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort+ SERR- PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation
[Bug 281402] Re: display problem
I managed to reproduce the issue after upgrading from 8.04 - 8.10 I have installed intel drivers, i810 but the problems still persists... I don't get 1152x864! ** Attachment added: Here's the files http://launchpadlibrarian.net/20327716/Xorg.0.log ** Changed in: xorg-server (Ubuntu) Status: Incomplete = Confirmed -- display problem https://bugs.launchpad.net/bugs/281402 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281402] Re: display problem
I also have the latest xorg! Please help! -- display problem https://bugs.launchpad.net/bugs/281402 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281402] Re: display problem
Hi hansum-rahul, Please attach the output of `lspci -vvnn`, and attach your /var/log/Xorg.0.log file from after reproducing this issue. If you've made any customizations to your /etc/X11/xorg.conf please attach that as well. ** Changed in: xorg-server (Ubuntu) Status: New = Incomplete -- display problem https://bugs.launchpad.net/bugs/281402 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281402] Re: display problem
the issue is rather an xorg one ** Changed in: xorg-server (Ubuntu) Sourcepackagename: gdm = xorg-server -- display problem https://bugs.launchpad.net/bugs/281402 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281402] Re: display problem
My problem is solved after a fresh installation of Ubuntu 8.04 (with the old Xorg-server)... I did one thing differently... I booted the Live CD previously in Safe- Graphics mode... but not the second time. -- display problem https://bugs.launchpad.net/bugs/281402 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
