[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
I wonder if has anything to do with the changes made to detect fail in resume, and call apport -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
@BUGabundo -- the changes for that in the suspend/hibernate cycle are limited to creating and removing a single file. So are unlikely to be realted to this issue. As for the original message. This is triggered when resuming the system too over 5 seconds from the time it started resume to when the resume is deemed complete. Although it comes with a back trace, it is mearly informational and indicative of a relativly slow resume. The kernel still carries on in the same manner. In your case it is tellng us that your resume took approximatly 8s, which isn't mad slow: Feb 17 01:17:00 blubug kernel: [15010.424230] PM: resume devices took 8.112 seconds As this message is benign I will close this one off. ** Changed in: network-manager (Ubuntu) Status: New => Invalid ** Changed in: pm-utils (Ubuntu) Status: New => Invalid ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Andy Whitcroft (apw) Status: New => In Progress -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
This is a benign kernel message indicating that the resume time was higher than expected. No action is required. Closing. ** Changed in: linux (Ubuntu) Status: In Progress => Invalid -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
Just to be sure: no trouble with the gl860 driver? -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
Sorry Nol... forgot to update the forum. AFAICT it is not caused (at least alone) by your driver. -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
*** This bug is a duplicate of bug 350609 *** https://bugs.launchpad.net/bugs/350609 this seems as dupe from bug #350609 .. failed to IDENTIFY (I/O Error... Feb 13 21:06:09 blubug kernel: [ 963.713392] sd 0:0:0:0: [sda] Starting disk Feb 13 21:06:09 blubug kernel: [ 963.928189] ata4: SATA link down (SStatus 0 SControl 300) Feb 13 21:06:09 blubug kernel: [ 964.181340] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) Feb 13 21:06:09 blubug kernel: [ 964.181341] ata5.00: revalidation failed (errno=-5) Feb 13 21:06:09 blubug kernel: [ 966.065176] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 13 21:06:09 blubug kernel: [ 966.079720] ata1.00: configured for UDMA/133 Feb 13 21:06:09 blubug kernel: [ 966.092226] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) Feb 13 21:06:09 blubug kernel: [ 966.092250] sd 0:0:0:0: [sda] Write Protect is off Feb 13 21:06:09 blubug kernel: [ 966.092253] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 13 21:06:09 blubug kernel: [ 966.092283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 13 21:06:09 blubug kernel: [ 967.140178] usb 7-6: reset high speed USB device using ehci_hcd and address 3 Feb 13 21:06:09 blubug kernel: [ 967.396176] usb 1-1: reset full speed USB device using uhci_hcd and address 2 Feb 13 21:06:09 blubug kernel: [ 967.660175] usb 5-1: reset full speed USB device using uhci_hcd and address 2 Feb 13 21:06:09 blubug kernel: [ 967.881391] gl860: Release: 0103 Feb 13 21:06:09 blubug kernel: [ 967.881393] gl860: Number of interfaces : 1 Feb 13 21:06:09 blubug kernel: [ 967.881394] gl860: Version Hulkie/Iceman/Soro (c) Feb 13 21:06:09 blubug kernel: [ 967.881395] gl860: Genesys USB2.0 - GL860 based webcam found. Feb 13 21:06:09 blubug kernel: [ 967.881396] gl860: Genesys USB2.0 2.0M WebCam - Product ID 0x0503. Feb 13 21:06:09 blubug kernel: [ 969.344373] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) Feb 13 21:06:09 blubug kernel: [ 969.344375] ata5.00: revalidation failed (errno=-5) ** This bug has been marked a duplicate of bug 350609 WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() with kern.log mesages ata2: softreset failed (device not ready), ata2.00: qc timeout (cmd 0xec), ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
*** This bug is a duplicate of bug 350609 *** https://bugs.launchpad.net/bugs/350609 this seems as dupe from bug #350609 .. failed to IDENTIFY (I/O Error... Feb 13 21:06:09 blubug kernel: [ 963.713392] sd 0:0:0:0: [sda] Starting disk Feb 13 21:06:09 blubug kernel: [ 963.928189] ata4: SATA link down (SStatus 0 SControl 300) Feb 13 21:06:09 blubug kernel: [ 964.181340] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) Feb 13 21:06:09 blubug kernel: [ 964.181341] ata5.00: revalidation failed (errno=-5) Feb 13 21:06:09 blubug kernel: [ 966.065176] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 13 21:06:09 blubug kernel: [ 966.079720] ata1.00: configured for UDMA/133 Feb 13 21:06:09 blubug kernel: [ 966.092226] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) Feb 13 21:06:09 blubug kernel: [ 966.092250] sd 0:0:0:0: [sda] Write Protect is off Feb 13 21:06:09 blubug kernel: [ 966.092253] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 13 21:06:09 blubug kernel: [ 966.092283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 13 21:06:09 blubug kernel: [ 967.140178] usb 7-6: reset high speed USB device using ehci_hcd and address 3 Feb 13 21:06:09 blubug kernel: [ 967.396176] usb 1-1: reset full speed USB device using uhci_hcd and address 2 Feb 13 21:06:09 blubug kernel: [ 967.660175] usb 5-1: reset full speed USB device using uhci_hcd and address 2 Feb 13 21:06:09 blubug kernel: [ 967.881391] gl860: Release: 0103 Feb 13 21:06:09 blubug kernel: [ 967.881393] gl860: Number of interfaces : 1 Feb 13 21:06:09 blubug kernel: [ 967.881394] gl860: Version Hulkie/Iceman/Soro (c) Feb 13 21:06:09 blubug kernel: [ 967.881395] gl860: Genesys USB2.0 - GL860 based webcam found. Feb 13 21:06:09 blubug kernel: [ 967.881396] gl860: Genesys USB2.0 2.0M WebCam - Product ID 0x0503. Feb 13 21:06:09 blubug kernel: [ 969.344373] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) Feb 13 21:06:09 blubug kernel: [ 969.344375] ata5.00: revalidation failed (errno=-5) ** This bug has been marked a duplicate of bug 350609 WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() with kern.log mesages ata2: softreset failed (device not ready), ata2.00: qc timeout (cmd 0xec), ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
I wonder if has anything to do with the changes made to detect fail in resume, and call apport -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
@BUGabundo -- the changes for that in the suspend/hibernate cycle are limited to creating and removing a single file. So are unlikely to be realted to this issue. As for the original message. This is triggered when resuming the system too over 5 seconds from the time it started resume to when the resume is deemed complete. Although it comes with a back trace, it is mearly informational and indicative of a relativly slow resume. The kernel still carries on in the same manner. In your case it is tellng us that your resume took approximatly 8s, which isn't mad slow: Feb 17 01:17:00 blubug kernel: [15010.424230] PM: resume devices took 8.112 seconds As this message is benign I will close this one off. ** Changed in: network-manager (Ubuntu) Status: New => Invalid ** Changed in: pm-utils (Ubuntu) Status: New => Invalid ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Andy Whitcroft (apw) Status: New => In Progress -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
This is a benign kernel message indicating that the resume time was higher than expected. No action is required. Closing. ** Changed in: linux (Ubuntu) Status: In Progress => Invalid -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
Just to be sure: no trouble with the gl860 driver? -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
Sorry Nol... forgot to update the forum. AFAICT it is not caused (at least alone) by your driver. -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
*** This bug is a duplicate of bug 350609 *** https://bugs.launchpad.net/bugs/350609 this seems as dupe from bug #350609 .. failed to IDENTIFY (I/O Error... Feb 13 21:06:09 blubug kernel: [ 963.713392] sd 0:0:0:0: [sda] Starting disk Feb 13 21:06:09 blubug kernel: [ 963.928189] ata4: SATA link down (SStatus 0 SControl 300) Feb 13 21:06:09 blubug kernel: [ 964.181340] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) Feb 13 21:06:09 blubug kernel: [ 964.181341] ata5.00: revalidation failed (errno=-5) Feb 13 21:06:09 blubug kernel: [ 966.065176] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 13 21:06:09 blubug kernel: [ 966.079720] ata1.00: configured for UDMA/133 Feb 13 21:06:09 blubug kernel: [ 966.092226] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) Feb 13 21:06:09 blubug kernel: [ 966.092250] sd 0:0:0:0: [sda] Write Protect is off Feb 13 21:06:09 blubug kernel: [ 966.092253] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 13 21:06:09 blubug kernel: [ 966.092283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 13 21:06:09 blubug kernel: [ 967.140178] usb 7-6: reset high speed USB device using ehci_hcd and address 3 Feb 13 21:06:09 blubug kernel: [ 967.396176] usb 1-1: reset full speed USB device using uhci_hcd and address 2 Feb 13 21:06:09 blubug kernel: [ 967.660175] usb 5-1: reset full speed USB device using uhci_hcd and address 2 Feb 13 21:06:09 blubug kernel: [ 967.881391] gl860: Release: 0103 Feb 13 21:06:09 blubug kernel: [ 967.881393] gl860: Number of interfaces : 1 Feb 13 21:06:09 blubug kernel: [ 967.881394] gl860: Version Hulkie/Iceman/Soro (c) Feb 13 21:06:09 blubug kernel: [ 967.881395] gl860: Genesys USB2.0 - GL860 based webcam found. Feb 13 21:06:09 blubug kernel: [ 967.881396] gl860: Genesys USB2.0 2.0M WebCam - Product ID 0x0503. Feb 13 21:06:09 blubug kernel: [ 969.344373] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) Feb 13 21:06:09 blubug kernel: [ 969.344375] ata5.00: revalidation failed (errno=-5) ** This bug has been marked a duplicate of bug 350609 WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() with kern.log mesages ata2: softreset failed (device not ready), ata2.00: qc timeout (cmd 0xec), ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
I wonder if has anything to do with the changes made to detect fail in resume, and call apport -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
@BUGabundo -- the changes for that in the suspend/hibernate cycle are limited to creating and removing a single file. So are unlikely to be realted to this issue. As for the original message. This is triggered when resuming the system too over 5 seconds from the time it started resume to when the resume is deemed complete. Although it comes with a back trace, it is mearly informational and indicative of a relativly slow resume. The kernel still carries on in the same manner. In your case it is tellng us that your resume took approximatly 8s, which isn't mad slow: Feb 17 01:17:00 blubug kernel: [15010.424230] PM: resume devices took 8.112 seconds As this message is benign I will close this one off. ** Changed in: network-manager (Ubuntu) Status: New => Invalid ** Changed in: pm-utils (Ubuntu) Status: New => Invalid ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Andy Whitcroft (apw) Status: New => In Progress -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
This is a benign kernel message indicating that the resume time was higher than expected. No action is required. Closing. ** Changed in: linux (Ubuntu) Status: In Progress => Invalid -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
Just to be sure: no trouble with the gl860 driver? -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
Sorry Nol... forgot to update the forum. AFAICT it is not caused (at least alone) by your driver. -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
*** This bug is a duplicate of bug 350609 *** https://bugs.launchpad.net/bugs/350609 this seems as dupe from bug #350609 .. failed to IDENTIFY (I/O Error... Feb 13 21:06:09 blubug kernel: [ 963.713392] sd 0:0:0:0: [sda] Starting disk Feb 13 21:06:09 blubug kernel: [ 963.928189] ata4: SATA link down (SStatus 0 SControl 300) Feb 13 21:06:09 blubug kernel: [ 964.181340] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) Feb 13 21:06:09 blubug kernel: [ 964.181341] ata5.00: revalidation failed (errno=-5) Feb 13 21:06:09 blubug kernel: [ 966.065176] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 13 21:06:09 blubug kernel: [ 966.079720] ata1.00: configured for UDMA/133 Feb 13 21:06:09 blubug kernel: [ 966.092226] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) Feb 13 21:06:09 blubug kernel: [ 966.092250] sd 0:0:0:0: [sda] Write Protect is off Feb 13 21:06:09 blubug kernel: [ 966.092253] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 13 21:06:09 blubug kernel: [ 966.092283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 13 21:06:09 blubug kernel: [ 967.140178] usb 7-6: reset high speed USB device using ehci_hcd and address 3 Feb 13 21:06:09 blubug kernel: [ 967.396176] usb 1-1: reset full speed USB device using uhci_hcd and address 2 Feb 13 21:06:09 blubug kernel: [ 967.660175] usb 5-1: reset full speed USB device using uhci_hcd and address 2 Feb 13 21:06:09 blubug kernel: [ 967.881391] gl860: Release: 0103 Feb 13 21:06:09 blubug kernel: [ 967.881393] gl860: Number of interfaces : 1 Feb 13 21:06:09 blubug kernel: [ 967.881394] gl860: Version Hulkie/Iceman/Soro (c) Feb 13 21:06:09 blubug kernel: [ 967.881395] gl860: Genesys USB2.0 - GL860 based webcam found. Feb 13 21:06:09 blubug kernel: [ 967.881396] gl860: Genesys USB2.0 2.0M WebCam - Product ID 0x0503. Feb 13 21:06:09 blubug kernel: [ 969.344373] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) Feb 13 21:06:09 blubug kernel: [ 969.344375] ata5.00: revalidation failed (errno=-5) ** This bug has been marked a duplicate of bug 350609 WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() with kern.log mesages ata2: softreset failed (device not ready), ata2.00: qc timeout (cmd 0xec), ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
I wonder if has anything to do with the changes made to detect fail in resume, and call apport -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
@BUGabundo -- the changes for that in the suspend/hibernate cycle are limited to creating and removing a single file. So are unlikely to be realted to this issue. As for the original message. This is triggered when resuming the system too over 5 seconds from the time it started resume to when the resume is deemed complete. Although it comes with a back trace, it is mearly informational and indicative of a relativly slow resume. The kernel still carries on in the same manner. In your case it is tellng us that your resume took approximatly 8s, which isn't mad slow: Feb 17 01:17:00 blubug kernel: [15010.424230] PM: resume devices took 8.112 seconds As this message is benign I will close this one off. ** Changed in: network-manager (Ubuntu) Status: New => Invalid ** Changed in: pm-utils (Ubuntu) Status: New => Invalid ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Andy Whitcroft (apw) Status: New => In Progress -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
This is a benign kernel message indicating that the resume time was higher than expected. No action is required. Closing. ** Changed in: linux (Ubuntu) Status: In Progress => Invalid -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
Just to be sure: no trouble with the gl860 driver? -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
Sorry Nol... forgot to update the forum. AFAICT it is not caused (at least alone) by your driver. -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
*** This bug is a duplicate of bug 350609 *** https://bugs.launchpad.net/bugs/350609 this seems as dupe from bug #350609 .. failed to IDENTIFY (I/O Error... Feb 13 21:06:09 blubug kernel: [ 963.713392] sd 0:0:0:0: [sda] Starting disk Feb 13 21:06:09 blubug kernel: [ 963.928189] ata4: SATA link down (SStatus 0 SControl 300) Feb 13 21:06:09 blubug kernel: [ 964.181340] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) Feb 13 21:06:09 blubug kernel: [ 964.181341] ata5.00: revalidation failed (errno=-5) Feb 13 21:06:09 blubug kernel: [ 966.065176] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 13 21:06:09 blubug kernel: [ 966.079720] ata1.00: configured for UDMA/133 Feb 13 21:06:09 blubug kernel: [ 966.092226] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) Feb 13 21:06:09 blubug kernel: [ 966.092250] sd 0:0:0:0: [sda] Write Protect is off Feb 13 21:06:09 blubug kernel: [ 966.092253] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 13 21:06:09 blubug kernel: [ 966.092283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 13 21:06:09 blubug kernel: [ 967.140178] usb 7-6: reset high speed USB device using ehci_hcd and address 3 Feb 13 21:06:09 blubug kernel: [ 967.396176] usb 1-1: reset full speed USB device using uhci_hcd and address 2 Feb 13 21:06:09 blubug kernel: [ 967.660175] usb 5-1: reset full speed USB device using uhci_hcd and address 2 Feb 13 21:06:09 blubug kernel: [ 967.881391] gl860: Release: 0103 Feb 13 21:06:09 blubug kernel: [ 967.881393] gl860: Number of interfaces : 1 Feb 13 21:06:09 blubug kernel: [ 967.881394] gl860: Version Hulkie/Iceman/Soro (c) Feb 13 21:06:09 blubug kernel: [ 967.881395] gl860: Genesys USB2.0 - GL860 based webcam found. Feb 13 21:06:09 blubug kernel: [ 967.881396] gl860: Genesys USB2.0 2.0M WebCam - Product ID 0x0503. Feb 13 21:06:09 blubug kernel: [ 969.344373] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) Feb 13 21:06:09 blubug kernel: [ 969.344375] ata5.00: revalidation failed (errno=-5) ** This bug has been marked a duplicate of bug 350609 WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() with kern.log mesages ata2: softreset failed (device not ready), ata2.00: qc timeout (cmd 0xec), ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
I wonder if has anything to do with the changes made to detect fail in resume, and call apport -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
@BUGabundo -- the changes for that in the suspend/hibernate cycle are limited to creating and removing a single file. So are unlikely to be realted to this issue. As for the original message. This is triggered when resuming the system too over 5 seconds from the time it started resume to when the resume is deemed complete. Although it comes with a back trace, it is mearly informational and indicative of a relativly slow resume. The kernel still carries on in the same manner. In your case it is tellng us that your resume took approximatly 8s, which isn't mad slow: Feb 17 01:17:00 blubug kernel: [15010.424230] PM: resume devices took 8.112 seconds As this message is benign I will close this one off. ** Changed in: network-manager (Ubuntu) Status: New => Invalid ** Changed in: pm-utils (Ubuntu) Status: New => Invalid ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Andy Whitcroft (apw) Status: New => In Progress -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
This is a benign kernel message indicating that the resume time was higher than expected. No action is required. Closing. ** Changed in: linux (Ubuntu) Status: In Progress => Invalid -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
Just to be sure: no trouble with the gl860 driver? -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
Sorry Nol... forgot to update the forum. AFAICT it is not caused (at least alone) by your driver. -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
*** This bug is a duplicate of bug 350609 *** https://bugs.launchpad.net/bugs/350609 this seems as dupe from bug #350609 .. failed to IDENTIFY (I/O Error... Feb 13 21:06:09 blubug kernel: [ 963.713392] sd 0:0:0:0: [sda] Starting disk Feb 13 21:06:09 blubug kernel: [ 963.928189] ata4: SATA link down (SStatus 0 SControl 300) Feb 13 21:06:09 blubug kernel: [ 964.181340] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) Feb 13 21:06:09 blubug kernel: [ 964.181341] ata5.00: revalidation failed (errno=-5) Feb 13 21:06:09 blubug kernel: [ 966.065176] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 13 21:06:09 blubug kernel: [ 966.079720] ata1.00: configured for UDMA/133 Feb 13 21:06:09 blubug kernel: [ 966.092226] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) Feb 13 21:06:09 blubug kernel: [ 966.092250] sd 0:0:0:0: [sda] Write Protect is off Feb 13 21:06:09 blubug kernel: [ 966.092253] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 13 21:06:09 blubug kernel: [ 966.092283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 13 21:06:09 blubug kernel: [ 967.140178] usb 7-6: reset high speed USB device using ehci_hcd and address 3 Feb 13 21:06:09 blubug kernel: [ 967.396176] usb 1-1: reset full speed USB device using uhci_hcd and address 2 Feb 13 21:06:09 blubug kernel: [ 967.660175] usb 5-1: reset full speed USB device using uhci_hcd and address 2 Feb 13 21:06:09 blubug kernel: [ 967.881391] gl860: Release: 0103 Feb 13 21:06:09 blubug kernel: [ 967.881393] gl860: Number of interfaces : 1 Feb 13 21:06:09 blubug kernel: [ 967.881394] gl860: Version Hulkie/Iceman/Soro (c) Feb 13 21:06:09 blubug kernel: [ 967.881395] gl860: Genesys USB2.0 - GL860 based webcam found. Feb 13 21:06:09 blubug kernel: [ 967.881396] gl860: Genesys USB2.0 2.0M WebCam - Product ID 0x0503. Feb 13 21:06:09 blubug kernel: [ 969.344373] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) Feb 13 21:06:09 blubug kernel: [ 969.344375] ata5.00: revalidation failed (errno=-5) ** This bug has been marked a duplicate of bug 350609 WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() with kern.log mesages ata2: softreset failed (device not ready), ata2.00: qc timeout (cmd 0xec), ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
I wonder if has anything to do with the changes made to detect fail in resume, and call apport -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
@BUGabundo -- the changes for that in the suspend/hibernate cycle are limited to creating and removing a single file. So are unlikely to be realted to this issue. As for the original message. This is triggered when resuming the system too over 5 seconds from the time it started resume to when the resume is deemed complete. Although it comes with a back trace, it is mearly informational and indicative of a relativly slow resume. The kernel still carries on in the same manner. In your case it is tellng us that your resume took approximatly 8s, which isn't mad slow: Feb 17 01:17:00 blubug kernel: [15010.424230] PM: resume devices took 8.112 seconds As this message is benign I will close this one off. ** Changed in: network-manager (Ubuntu) Status: New => Invalid ** Changed in: pm-utils (Ubuntu) Status: New => Invalid ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Andy Whitcroft (apw) Status: New => In Progress -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
This is a benign kernel message indicating that the resume time was higher than expected. No action is required. Closing. ** Changed in: linux (Ubuntu) Status: In Progress => Invalid -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
Just to be sure: no trouble with the gl860 driver? -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 329254] Re: WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80()
Sorry Nol... forgot to update the forum. AFAICT it is not caused (at least alone) by your driver. -- WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x7c/0x80() https://bugs.launchpad.net/bugs/329254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
