[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
Feel free to test these patches out: http://www.kernel.org/pub/linux/kernel/people/mcgrof/patches/ath9k/2010/09 /PS-fixes-09-04/ They will be sent upstream and propagated upstream. -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
I have the same problem describe in this bug. My laptop is a Toshiba- Satellite (Atheros Wireless LAN) running Ubuntu 10.4 LTS Lucid Lynx. I have to restart my laptop several time per day :( [ 3029.873331] Restarting tasks ... done. [ 3030.033352] r8169: eth0: link down [ 3030.033588] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3030.140179] ath9k: timeout (10 us) on reg 0x9860: 0x00049d19 0x0001 != 0x [ 3030.140185] ath9k: Unable to reset hardware; reset status -5 (freq 2437 MHz) [ 3030.157036] ath9k: Unable to set channel [ 3030.157312] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3030.285044] ath9k: Unable to set channel -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
@Daniel Dufour # 74 A couple of workarounds (covered elsewhere): - Install packet called 'linux-backports-modules-wireless-luciud-generic'. It didn't completely fix the problem for me, but it happens a lot less anyway - Instead of restarting, bring up a terminal and run the two commands: sudo modprobe -r ath9k sudo modprobe ath9k /N -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
** Changed in: linux (Ubuntu Karmic) Assignee: Andy Whitcroft (apw) = (unassigned) -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
I have the same/a similar problem for quite a while on my eee1005HA. The problems startet after upgrading to 10.04 LTS. Relevant dmesg: ** [ 408.526742] ath9k: Chip reset failed [ 408.526747] ath9k: Unable to reset channel (2447 Mhz) reset status -22 [ 408.527319] ath9k: Unable to set channel [ 408.535568] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [ 408.543900] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [ 408.552142] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [ 408.560394] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [ 408.568604] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [ 408.576811] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [ 408.576824] ath9k: Unable to stop TxDMA. Reset HAL! [ 408.693973] ath9k: timeout (10 us) on reg 0x7000: 0x 0x0003 != 0x [ 408.693986] ath9k: Chip reset failed [ 408.693991] ath9k: Unable to reset hardware; reset status -22 uname-a: * Linux oby-eee 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686 GNU/Linux lsb_release -rd Description: Ubuntu 10.04 LTS Release: 10.04 -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
I think the problem is still active. I have a laptop Asus n61jv, with AR9285, wireless card. See kernel.log included ** Attachment added: logs cat /var/log/kern.log | grep ath9k http://launchpadlibrarian.net/49770079/ath9k.txt -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
If this is fixed, why are there still problems? -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
I still have a problem, please have a look at http://forum.ubuntu- fr.org/viewtopic.php?pid=3245293 -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
** Changed in: linux (Ubuntu Karmic) Status: In Progress = Fix Committed ** Changed in: linux (Ubuntu Karmic) Status: Fix Committed = Confirmed -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
I've had a lot more luck with the backport modules Stefan has put together over on https://bugs.launchpad.net/bugs/460886 That seems to stop the hardware crashes and the DMA stalls. I can rip that driver out in mid flow and then reinsert it with no problems. Unfortunately it generally syncs at super-slow speeds, but at least it works! -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
@Neil -- ok so we are good on the ath9k fix in the sense its an improvement over not working at all. So I think thats a positive test result dispite ath9k not being wonderful for you. We should get a new bug filed for the performance issues. On the sound issues, could you test the kernel in Karmic -proposed, and if the behaviour is present there could you file a new bug and add the tag regression-proposed to it, and also report its number in this bug for me. -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
Andy, I would say that's an over optimistic assessment. It doesn't fix this bug because the driver still crashes the hardware and we still get the DMA stalls. It doesn't fix https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/404972 - as the upper layer throughput issues are still there. It may help with https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/460886 as it seems to have stopped the crashes due to network scanning. So you still get to close a bug, just not this one ;-) 2009/11/12 Andy Whitcroft a...@canonical.com: @Neil -- ok so we are good on the ath9k fix in the sense its an improvement over not working at all. So I think thats a positive test result dispite ath9k not being wonderful for you. We should get a new bug filed for the performance issues. On the sound issues, could you test the kernel in Karmic -proposed, and if the behaviour is present there could you file a new bug and add the tag regression-proposed to it, and also report its number in this bug for me. -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a direct subscriber of the bug. -- Neil Wilson -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
I've been having this and similar problems with the ath9k module. Since installing the patched kernel, I've just had 6 hours of network stability. Will post if the problem reoccurs, but I think (fingers crossed) the patch might have done the trick. -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
** Also affects: linux (Ubuntu Karmic) Importance: Undecided Status: New -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
This fix is showing good results on a number of bugs and is currently under review for SRU to karmic. Watch this bug for updates. ** Changed in: linux (Ubuntu Karmic) Importance: Undecided = Medium ** Changed in: linux (Ubuntu Karmic) Status: New = In Progress ** Changed in: linux (Ubuntu Karmic) Assignee: (unassigned) = Andy Whitcroft (apw) -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
The lucid kernel already has the commit referenced applied. Therefore closing there. ** Changed in: linux (Ubuntu) Status: Incomplete = Fix Released -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
Andy, Thanks for putting this together. I've given it a go and the results are not as good as others, although better than the vanilla kernel. On my system I lose the sound initially on boot, and in particular the inbuilt SPDIF is non-functional to start with despite selecting Digital output on the sound preferences. Instead I get a series of clicks from the machine and a bunch of messages in dmesg [ 68.200275] hda-intel: spurious response 0x0:0x0, last cmd=0x670503 [ 68.200277] hda-intel: spurious response 0x0:0x0, last cmd=0x670503 [ 68.200280] hda-intel: spurious response 0x0:0x0, last cmd=0x870503 [ 68.200282] hda-intel: spurious response 0x0:0x0, last cmd=0x870503 This is a regression. On the wireless side the driver is somewhat more stable than orginal. Unfortunately the rate selection algorithm leaves a little to be desired as it is selecting and sticking with rates that are not sustainable. I regularly lose IP throughput to the router despite the wireless showing as connected. When it stick like this and I force a reattachment I get the DMA stall message in the kernel log. [ 206.241910] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 207.241841] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 207.451996] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 212.494469] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 213.481942] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 213.692490] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 218.724375] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 219.701934] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 219.912340] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 224.951915] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 225.941954] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 226.152381] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 231.201896] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 232.181888] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 232.391960] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 237.19] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 238.431867] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 238.642009] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 243.694374] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 244.671917] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 244.882413] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 249.921873] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 250.901918] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 251.114939] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 256.141905] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 257.134399] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 257.342371] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 347.511845] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 348.492672] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 348.702094] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 Sometimes I can do a remove and reinsert of the module, but it rarely brings the network back. Mostly I get the usual message [ 928.191692] ath9k: Driver unloaded [ 948.749285] ath9k :06:00.0: PCI INT A - GSI 17 (level, low) - IRQ 17 [ 948.859217] ath9k: timeout (10 us) on reg 0x7044: 0x 0x000f != 0x0002 [ 948.859227] ath9k: Couldn't reset chip [ 948.859240] ath9k: Unable to attach hardware; HAL status -5 [ 948.859798] ath9k :06:00.0: PCI INT A disabled This is on karmic. -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
Ok the patch mentioned on the upstream bug report linked above is applied to some test kernels for another bug, if those who are affected by this could test these kernels and report back here. Thanks! The kernels are at the URL below: http://people.canonical.com/~apw/lp418933-karmic/ ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete ** Changed in: linux (Ubuntu) Assignee: (unassigned) = Andy Whitcroft (apw) -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
I have the same problem in Ubuntu 9.10 final with 2.6.31-14-generic 64-bit a new HP dv7 laptop. After some random time (and especially after suspend to RAM), the ath9k driver dies, there are the same/similar messages in dmesg, and KDE keeps asking me for the WPA password. The only way to get the wireless working is to reboot, which is painful. Neil: I tried rmmod/modprobe, and I did not see those errors. -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
The behaviour with ath9k and unable to attach hardware; HAL status -5 is exactly what I am experiencing under any 2.6.31.x kernel (both with Arch linux and now also with Karmic RC) Could anyone else experiencing this eventually provide feedback at http://bugzilla.kernel.org/show_bug.cgi?id=14402 since I though I was the only one seeing this ** Bug watch added: Linux Kernel Bug Tracker #14402 http://bugzilla.kernel.org/show_bug.cgi?id=14402 -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
This is still present in Karmic RC. Note that this bug is different from the 'DMA failed to stop' error. The differentiation is whether you are able to remove and reinsert the module. If you do: sudo rmmod ath9k sudo modprobe ath9k and you get [ 900.135286] ath9k: Couldn't reset chip [ 900.135298] ath9k: Unable to attach hardware; HAL status -5 [ 900.135449] ath9k :06:00.0: PCI INT A disabled in the dmesg output then you have this bug If the wireless restarts correctly you probably have this bug https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/460886 Note that you may have both... -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
Same issues with the latest amd64 version of 9.10 on Toshiba satelite Pro P300-28L. The connection drops out and it takes ages to reconnect 4020 [ 1678.252614] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 1679.262855] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 1679.482676] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 1798.255279] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 1799.264662] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 1799.484103] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 [ 2370.731588] wlan0: authenticate with AP 00:21:63:81:6d:3d [ 2370.734534] wlan0: authenticated [ 2370.734539] wlan0: associate with AP 00:21:63:81:6d:3d [ 2370.738060] wlan0: RX ReassocResp from 00:21:63:81:6d:3d (capab=0x411 status=0 aid=1) [ 2370.738065] wlan0: associated [ 2392.070279] wlan0: no probe response from AP 00:21:63:81:6d:3d - disassociating [ 2399.422626] wlan0: authenticate with AP 00:21:63:81:6d:3d My router is just behind the door, but networkmanager thinks it has 25% signal, while the router in the neighbours house shows 100% strength. Could there be some mix up in the driver, and maybe it thinks there is no signal when there is plenty? I had no issues on my macbook pro (currently in service), or winXP on Toshiba (I need ubuntu for some things) -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
I have the same problem: Acer 4810TZ: 02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) In dmesg, I can see: Oct 10 08:43:26 gustavo-laptop kernel: [ 166.524219] ath9k: DMA failed to stop in 10 ms AR_CR=0x0024 AR_DIAG_SW=0x4020 Oct 10 08:44:26 gustavo-laptop wpa_supplicant[1190]: CTRL-EVENT-SCAN-RESULTS Normaly, the problem apper after open transmission software, and download some file in same time, maybe just a coincidence :-) -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
Sorry, is a Ubuntu Karmic beta with all updates. -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
I've been informed that blacklisting `asus_laptop` module fixes somehow the problem. Can somebody try this on an Asus laptop? -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 407040] Re: ath9k - crashes and unable to reinsert module. Hardware won't reset.
Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: neil 3212 F pulseaudio CRDA: country 98: (2402 - 2482 @ 40), (N/A, 20) Card0.Amixer.info: Card hw:0 'SB'/'HDA ATI SB at 0xf000 irq 16' Mixer name : 'Realtek ALC888' Components : 'HDA:10ec0888,10250206,00100202 HDA:14f12c06,10250093,0010' Controls : 28 Simple ctrls : 16 Card1.Amixer.info: Card hw:1 'HDMI'/'HDA ATI HDMI at 0xcfdec000 irq 19' Mixer name : 'ATI RS690/780 HDMI' Components : 'HDA:1002791a,00791a00,0010' Controls : 4 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] CheckboxSubmission: fff1b48640eeda6e5016227e703115de CheckboxSystem: 08f17885f317464241752fbe5a8cd730 DistroRelease: Ubuntu 9.10 HibernationDevice: RESUME=UUID=a1085570-586c-4eac-a7cb-52ca2f87881e IwConfig: lono wireless extensions. eth0 no wireless extensions. Lsusb: Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire 5536 Package: linux (not installed) PccardctlIdent: PccardctlStatus: ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-10-generic root=UUID=d408b188-d059-4e08-8d94-ee7307e90bd3 ro quiet splash ProcEnviron: PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-10.32-generic RelatedPackageVersions: linux-backports-modules-2.6.31-10-generic N/A linux-firmware 1.16 RfKill: 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no Uname: Linux 2.6.31-10-generic x86_64 UserGroups: dmi.bios.date: 02/27/2009 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: V1.03 dmi.board.name: JV50PU dmi.board.vendor: Acer dmi.board.version: Rev dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvrV1.03:bd02/27/2009:svnAcer:pnAspire5536:pvr0100:rvnAcer:rnJV50PU:rvrRev:cvnAcer:ct10:cvrN/A: dmi.product.name: Aspire 5536 dmi.product.version: 0100 dmi.sys.vendor: Acer ** Summary changed: - ath9k - crashes and won't reset + ath9k - crashes and unable to reinsert module. Hardware won't reset. -- ath9k - crashes and unable to reinsert module. Hardware won't reset. https://bugs.launchpad.net/bugs/407040 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs