The crash comes with different medias allways after the lead in is
written. I think this is a problem with the hardware. So if you also
have the same device or computer, just try to write some mp3-files on a
disc.
if you want, I attach the bug-report written by k3b:
Devices
---
HL-DT-ST DVDRAM GSA-T50N RR09 (/dev/sr0, CD-R, CD-RW, CD-Rom, DVD-Rom,
DVD-R, DVD-RW, DVD-R doppelschichtig, DVD+R, DVD+RW, DVD+R
doppelschichtig) [DVD-Rom, DVD-R Sequentiell, Zweischichtige DVD-R
Sequentiell, Zweischicht-DVD-R Sprung, DVD-Ram, DVD-RW Eingeschränktes
Überbrennen, DVD-RW Sequentiell, DVD+RW, DVD+R, Zweischichtige DVD+R,
CD-Rom, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16,
RAW/R96P, RAW/R96R, Eingeschränktes Überschreiben, Sprung zwischen
DVD-Schichten] [%7]
System
---
K3b Version: 1.68.0
KDE Version: 4.3.2 (KDE 4.3.2)
QT Version: 4.5.2
Kernel: 2.6.31-19-generic
Used versions
---
cdrecord: 1.1.9
cdrecord
---
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Text len: 198
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type: Removable CD-ROM
Version: 5
Response Format: 2
Capabilities :
Vendor_info: 'HL-DT-ST'
Identification : 'DVDRAM GSA-T50N '
Revision : 'RR09'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 15396 kB/s 87x CD 11x DVD
FIFO size : 12582912 = 12288 KB
Speed set to 1764 KB/s
pregap1: -1
Track 01: audio 54 MB (05:21.00) no preemp swab copy
Track 02: audio 53 MB (05:16.64) no preemp swab copy
Track 03: audio 50 MB (04:58.14) no preemp swab copy
Total size: 157 MB (15:35.78) = 70184 sectors
Lout start: 157 MB (15:37/59) = 70184 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 3
A1 values: 24 1A BC
A2 values: 26 B2 26
Disk type:Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 289665
Starting to write CD/DVD at speed 10.0 in real SAO mode for single session.
Last chance to quit, starting real write in2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 FF FF FC 7D 00 02 9F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format)
Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
/usr/bin/wodim: Could not write Lead-in.
SAO startsec: -11635
Writing lead-in...
write CD-Text data: error after 1030656 bytes
Writing time: 31.837s
/usr/bin/wodim: fifo had 192 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
---
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=10 -sao
driveropts=burnfree textfile=/tmp/qt_temp.mN4868 -useinfo -audio
/tmp/kde-norbert/k3b_audio_0_01.inf /tmp/kde-norbert/k3b_audio_0_02.inf
/tmp/kde-norbert/k3b_audio_0_03.inf
I hope this was helpful.
Norbert
Am 13.02.2010 23:33, schrieb Sinani201:
> Thank you for taking the time to report this bug and helping to make
> Ubuntu better. Please answer these questions:
>
> * Is this reproducible?
> * If so, what specific steps should we take to recreate this bug?
>
> This will help us to find and resolve the problem.
>
>
--
k3b crashes with Asus K51 AC
https://bugs.launchpad.net/bugs/521499
You received this bug notification because
