[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
This bug was fixed in the package linux - 2.6.38-10.46 --- linux (2.6.38-10.46) natty-proposed; urgency=low [ Steve Conklin ] * Release Tracking Bug - LP: #802464 [ Upstream Kernel Changes ] * Revert put stricter guards on queue dead checks * Revert fix oops in scsi_run_queue() linux (2.6.38-10.45) natty-proposed; urgency=low [ Upstream Kernel Changes ] * Revert af_unix: Only allow recv on connected seqpacket sockets. linux (2.6.38-10.44) natty-proposed; urgency=low [ Steve Conklin ] * Release Tracking Bug - LP: #792013 [ Robert Nelson ] * SAUCE: omap3: beagle: detect new xM revision B - LP: #770679 * SAUCE: omap3: beagle: detect new xM revision C - LP: #770679 * SAUCE: omap3: beagle: if rev unknown, assume xM revision C - LP: #770679 [ Stefan Bader ] * Include nls_iso8859-1 for virtual images - LP: #732046 [ Thomas Schlichter ] * SAUCE: vesafb: mtrr module parameter is uint, not bool - LP: #778043 [ Tim Gardner ] * Revert SAUCE: acpi battery -- move first lookup asynchronous - LP: #775809 * updateconfigs after update to v2.6.38.6 [ Upstream Kernel Changes ] * Revert ALSA: hda - Fix pin-config of Gigabyte mobo - LP: #780546 * Revert [SCSI] Retrieve the Caching mode page - LP: #788691 * Revert USB: xhci - fix unsafe macro definitions * Revert USB: xhci - fix math in xhci_get_endpoint_interval() * Revert USB: xhci - also free streams when resetting devices * ath9k_hw: fix stopping rx DMA during resets - LP: #775809 * netxen: limit skb frags for non tso packet - LP: #775809 * ath: add missing regdomain pair 0x5c mapping - LP: #775809 * block, blk-sysfs: Fix an err return path in blk_register_queue() - LP: #775809 * p54: Initialize extra_len in p54_tx_80211 - LP: #775809 * qlcnic: limit skb frags for non tso packet - LP: #775809 * nfsd4: fix struct file leak on delegation - LP: #775809 * nfsd4: Fix filp leak - LP: #775809 * virtio: Decrement avail idx on buffer detach - LP: #775809 * x86, gart: Set DISTLBWALKPRB bit always - LP: #775809 * x86, gart: Make sure GART does not map physmem above 1TB - LP: #775809 * intel-iommu: Fix use after release during device attach - LP: #775809 * intel-iommu: Unlink domain from iommu - LP: #775809 * intel-iommu: Fix get_domain_for_dev() error path - LP: #775809 * drm/radeon/kms: pll tweaks for r7xx - LP: #775809 * drm/nouveau: fix notifier memory corruption bug - LP: #775809 * drm/radeon/kms: fix bad shift in atom iio table parser - LP: #775809 * drm/i915/tv: Remember the detected TV type - LP: #775809 * tty/n_gsm: fix bug in CRC calculation for gsm1 mode - LP: #775809 * serial/imx: read cts state only after acking cts change irq - LP: #775809 * ASoC: Fix output PGA enabling in wm_hubs CODECs - LP: #775809 * ASoC: codecs: JZ4740: Fix OOPS - LP: #775809 * ALSA: hda - Add a fix-up for Acer dmic with ALC271x codec - LP: #775809 * ahci: don't enable port irq before handler is registered - LP: #775809 * libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65 - LP: #775809 * kconfig: Avoid buffer underrun in choice input - LP: #775809 * UBIFS: fix master node recovery - LP: #775809 * ideapad: read brightness setting on brightness key notify - LP: #775809 * ACPI battery: fribble sysfs files from a resume notifier - LP: #775809 * UBIFS: fix false space checking failure - LP: #775809 * kvm-390: Let kernel exit SIE instruction on work - LP: #775809 * pfault: fix token handling - LP: #775809 * ACPI / PM: Avoid infinite recurrence while registering power resources - LP: #775809 * slub: fix panic with DISCONTIGMEM - LP: #775809 * set memory ranges in N_NORMAL_MEMORY when onlined - LP: #775809 * FLEXCOP-PCI: fix __xlate_proc_name-warning for flexcop-pci - LP: #775809 * virtio: console: Enable call to hvc_remove() on console port remove - LP: #775809 * oom: use pte pages in OOM score - LP: #775809 * mm: check if PTE is already allocated during page fault - LP: #775809 * mm: thp: fix /dev/zero MAP_PRIVATE and vm_flags cleanups - LP: #775809 * m68k/mm: Set all online nodes in N_NORMAL_MEMORY - LP: #775809 * vfs: avoid large kmalloc()s for the fdtable - LP: #775809 * nfs: don't lose MS_SYNCHRONOUS on remount of noac mount - LP: #775809 * NFSv4.1: Ensure state manager thread dies on last umount - LP: #775809 * um: mdd support for 64 bit atomic operations - LP: #775809 * drm: select FRAMEBUFFER_CONSOLE_PRIMARY if we have FRAMEBUFFER_CONSOLE - LP: #775809 * agp: fix arbitrary kernel memory writes - LP: #775809 * agp: fix OOM and buffer overflow - LP: #775809 * iwlwifi: do not set tx power when channel is changing - LP: #775809 * iwl3945: do not deprecate software scan - LP:
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
** Changed in: linux (Ubuntu) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/662288/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
** Branch linked: lp:ubuntu/linux-ti-omap4 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/662288/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
** Tags removed: regression-potential -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
Tested and confirmed working on an Acer Aspire Revo 3610 from the proposed repository with kernel 2.6.38-9.43. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
I would like to ask, the fix came with default installation live CD of Ubuntu 11.04, or update? I ask this because I want to install Ubuntu 11.04 safely. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
Accepted linux into natty-proposed, the package will build now and be available in a few hours. Please test and give feedback here. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you in advance! ** Also affects: linux (Ubuntu Natty) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Natty) Status: New = Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
** Branch linked: lp:ubuntu/natty-proposed/linux-ti-omap4 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
The commit for this issue came in via upstream stable release. As such it is not subject to the standard bug verification process. ** Tags added: verification-done-natty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
Unfortunately I spoke too soon. Looks like this will land in the first SRU (stable release update) kernel for Natty. For those looking for a patched kernel to use in the mean time, I'd suggest running the pre- proposed kernel (linux-2.6.38-9.43~pre201104180902 is still building so give it a few hours): https://launchpad.net/~kernel-ppa/+archive/pre-proposed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
Thanks all, for getting this into Natty. This is very much appreciated. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
Looks like we just pulled in the 2.6.38.3 stable updates which contains the patch to resolve this bug. The 2.6.38.3 stable patch set is queued for the next (and final) Natty upload before release. Setting this to Fix Committed for now. ** Changed in: linux (Ubuntu) Status: Confirmed = Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
** Description changed: - [Status] - fixed in linux mainline with commit 7f6e144fb99a4a70d3c5ad5f074204c5b89a6f65 rt2x00: Fix radio off hang issue for PCIE interface (see comment 31) - not fixed in kernels 2.6.38 and older (natty, maverick) + [Status 2010-04-12] + fixed in linux mainline (since 2.6.39) with commit 7f6e144fb99a4a70d3c5ad5f074204c5b89a6f65 rt2x00: Fix radio off hang issue for PCIE interface (see comment 31) + not (yet) fixed in kernels 2.6.38 and older (natty, maverick) submitted to stable on 2010-04-05 by Stanislaw Gruszka + committed to stable-queue: http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git;a=tree;f=queue-2.6.38;hb=HEAD (so it should be in 2.6.38.3) This commit should be considered for inclusion in natty. [Original Report] When I shut down the computer it does not switch off and I have to hold down the power button to power it off completely. Following the advice of Wolfgang Kufner I have submitted this new bug (see comment #25 on this bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/594866). When I blacklist the modules listed in post #14 of the above bug my PC shuts down properly but I cannot connect to a WPA2 wireless router. If I un-blacklist rt2800pci (keeping the other modules blacklisted) I can again connect to the WPA2 wireless router but I can no longer shut down. I have tried several different combinations of blacklisting the modules in post #14 but none of the combinations I tried seemed to work. My PC is an MSI CR700. ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: linux-image-2.6.35-22-generic 2.6.35-22.33 Regression: Yes Reproducible: No ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4 Uname: Linux 2.6.35-22-generic i686 NonfreeKernelModules: nvidia AcpiTables: Error: command ['gksu', '-D', 'Apport', '--', '/usr/share/apport/dump_acpi_tables.py'] failed with exit code 1: (gksu:9846): Gdk-CRITICAL **: IA__gdk_draw_pixbuf: assertion `GDK_IS_DRAWABLE (drawable)' failed AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: marjorie 1485 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'NVidia'/'HDA NVidia at 0xfae78000 irq 21' Mixer name : 'Nvidia MCP79/7A HDMI' Components : 'HDA:10ec0888,14621019,00100202 HDA:10de0007,10de0101,00100100' Controls : 32 Simple ctrls : 17 Date: Sun Oct 17 18:34:46 2010 Frequency: Once a day. HibernationDevice: RESUME=UUID=cfb75d32-2f8e-4d89-8c5e-02f828455d9f InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) Lsusb: Bus 002 Device 002: ID 0461:4d08 Primax Electronics, Ltd Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Micro-Star International CR700 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=c00e545b-2e51-41b6-88d9-6e25f57fcf47 ro quiet splash ProcEnviron: LANG=en_GB.UTF-8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.38 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux StagingDrivers: rt2860sta Title: [STAGING] dmi.bios.date: 01/20/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: A1734NMS V3.1A dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: MS-1734 dmi.board.vendor: MSI dmi.board.version: Ver 1.000 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrA1734NMSV3.1A:bd01/20/2010:svnMicro-StarInternational:pnCR700:pvrVer1.000:rvnMSI:rnMS-1734:rvrVer1.000:cvnToBeFilledByO.E.M.:ct10:cvrToBeFilledByO.E.M.: dmi.product.name: CR700 dmi.product.version: Ver 1.000 dmi.sys.vendor: Micro-Star International -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
** Description changed: [Status] fixed in linux mainline with commit 7f6e144fb99a4a70d3c5ad5f074204c5b89a6f65 rt2x00: Fix radio off hang issue for PCIE interface (see comment 31) not fixed in kernels 2.6.38 and older (natty, maverick) + submitted to stable on 2010-04-05 by Stanislaw Gruszka This commit should be considered for inclusion in natty. [Original Report] When I shut down the computer it does not switch off and I have to hold down the power button to power it off completely. Following the advice of Wolfgang Kufner I have submitted this new bug (see comment #25 on this bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/594866). When I blacklist the modules listed in post #14 of the above bug my PC shuts down properly but I cannot connect to a WPA2 wireless router. If I un-blacklist rt2800pci (keeping the other modules blacklisted) I can again connect to the WPA2 wireless router but I can no longer shut down. I have tried several different combinations of blacklisting the modules in post #14 but none of the combinations I tried seemed to work. My PC is an MSI CR700. ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: linux-image-2.6.35-22-generic 2.6.35-22.33 Regression: Yes Reproducible: No ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4 Uname: Linux 2.6.35-22-generic i686 NonfreeKernelModules: nvidia AcpiTables: Error: command ['gksu', '-D', 'Apport', '--', '/usr/share/apport/dump_acpi_tables.py'] failed with exit code 1: (gksu:9846): Gdk-CRITICAL **: IA__gdk_draw_pixbuf: assertion `GDK_IS_DRAWABLE (drawable)' failed AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: marjorie 1485 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'NVidia'/'HDA NVidia at 0xfae78000 irq 21' Mixer name : 'Nvidia MCP79/7A HDMI' Components : 'HDA:10ec0888,14621019,00100202 HDA:10de0007,10de0101,00100100' Controls : 32 Simple ctrls : 17 Date: Sun Oct 17 18:34:46 2010 Frequency: Once a day. HibernationDevice: RESUME=UUID=cfb75d32-2f8e-4d89-8c5e-02f828455d9f InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) Lsusb: Bus 002 Device 002: ID 0461:4d08 Primax Electronics, Ltd Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Micro-Star International CR700 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=c00e545b-2e51-41b6-88d9-6e25f57fcf47 ro quiet splash ProcEnviron: LANG=en_GB.UTF-8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.38 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux StagingDrivers: rt2860sta Title: [STAGING] dmi.bios.date: 01/20/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: A1734NMS V3.1A dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: MS-1734 dmi.board.vendor: MSI dmi.board.version: Ver 1.000 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrA1734NMSV3.1A:bd01/20/2010:svnMicro-StarInternational:pnCR700:pvrVer1.000:rvnMSI:rnMS-1734:rvrVer1.000:cvnToBeFilledByO.E.M.:ct10:cvrToBeFilledByO.E.M.: dmi.product.name: CR700 dmi.product.version: Ver 1.000 dmi.sys.vendor: Micro-Star International -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
** Patch added: linux-2.6.git-7f6e144fb99a4a70d3c5ad5f074204c5b89a6f65.patch https://bugs.launchpad.net/ubuntu/+source/linux/+bug/662288/+attachment/1945514/+files/linux-2.6.git-7f6e144fb99a4a70d3c5ad5f074204c5b89a6f65.patch -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
** Tags added: natty ** Tags removed: needs-upstream-testing staging -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
@Andy Whitcroft -- Please consider this patch for inclusion into Natty. The patch that fixes this freeze bug is now in linux mainline. It is the single commit 7f6e144fb99a4a70d3c5ad5f074204c5b89a6f65 rt2x00: Fix radio off hang issue for PCIE interface. This has been verified by Greg Whiteley (see comment 31). Without this patch rt3090 freezes the system on every shutdown or unload. I checked that it applies cleanly to the current natty kernel. (Unsurprisingly - it's the first rt2x00 commit that didn't make it into 2.6.38 :-\ ) This patch has shown no regressions for rt3090 and rt2860 hardware. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
** Changed in: linux Status: Fix Committed = Fix Released ** Description changed: [Status] - fixed in linux-next with commit 7f6e144fb99a4a70d3c5ad5f074204c5b89a6f65 rt2x00: Fix radio off hang issue for PCIE interface (see comment 31) + fixed in linux mainline with commit 7f6e144fb99a4a70d3c5ad5f074204c5b89a6f65 rt2x00: Fix radio off hang issue for PCIE interface (see comment 31) not fixed in kernels 2.6.38 and older (natty, maverick) + + This commit should be considered for inclusion in natty. [Original Report] When I shut down the computer it does not switch off and I have to hold down the power button to power it off completely. Following the advice of Wolfgang Kufner I have submitted this new bug (see comment #25 on this bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/594866). When I blacklist the modules listed in post #14 of the above bug my PC shuts down properly but I cannot connect to a WPA2 wireless router. If I un-blacklist rt2800pci (keeping the other modules blacklisted) I can again connect to the WPA2 wireless router but I can no longer shut down. I have tried several different combinations of blacklisting the modules in post #14 but none of the combinations I tried seemed to work. My PC is an MSI CR700. ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: linux-image-2.6.35-22-generic 2.6.35-22.33 Regression: Yes Reproducible: No ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4 Uname: Linux 2.6.35-22-generic i686 NonfreeKernelModules: nvidia AcpiTables: Error: command ['gksu', '-D', 'Apport', '--', '/usr/share/apport/dump_acpi_tables.py'] failed with exit code 1: (gksu:9846): Gdk-CRITICAL **: IA__gdk_draw_pixbuf: assertion `GDK_IS_DRAWABLE (drawable)' failed AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: marjorie 1485 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'NVidia'/'HDA NVidia at 0xfae78000 irq 21' Mixer name : 'Nvidia MCP79/7A HDMI' Components : 'HDA:10ec0888,14621019,00100202 HDA:10de0007,10de0101,00100100' Controls : 32 Simple ctrls : 17 Date: Sun Oct 17 18:34:46 2010 Frequency: Once a day. HibernationDevice: RESUME=UUID=cfb75d32-2f8e-4d89-8c5e-02f828455d9f InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) Lsusb: Bus 002 Device 002: ID 0461:4d08 Primax Electronics, Ltd Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Micro-Star International CR700 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=c00e545b-2e51-41b6-88d9-6e25f57fcf47 ro quiet splash ProcEnviron: LANG=en_GB.UTF-8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.38 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux StagingDrivers: rt2860sta Title: [STAGING] dmi.bios.date: 01/20/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: A1734NMS V3.1A dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: MS-1734 dmi.board.vendor: MSI dmi.board.version: Ver 1.000 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrA1734NMSV3.1A:bd01/20/2010:svnMicro-StarInternational:pnCR700:pvrVer1.000:rvnMSI:rnMS-1734:rvrVer1.000:cvnToBeFilledByO.E.M.:ct10:cvrToBeFilledByO.E.M.: dmi.product.name: CR700 dmi.product.version: Ver 1.000 dmi.sys.vendor: Micro-Star International -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662288] Re: rt3090: freeze on module rt2800pci unload
** Description changed: - When I shut down the computer it does not switch off and I have to hold - down the power button to power it off completely. + [Status] + fixed in linux-next with commit 7f6e144fb99a4a70d3c5ad5f074204c5b89a6f65 rt2x00: Fix radio off hang issue for PCIE interface (see comment 31) + not fixed in kernels 2.6.38 and older (natty, maverick) + + [Original Report] + When I shut down the computer it does not switch off and I have to hold down the power button to power it off completely. Following the advice of Wolfgang Kufner I have submitted this new bug (see comment #25 on this bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/594866). When I blacklist the modules listed in post #14 of the above bug my PC shuts down properly but I cannot connect to a WPA2 wireless router. If I un-blacklist rt2800pci (keeping the other modules blacklisted) I can again connect to the WPA2 wireless router but I can no longer shut down. I have tried several different combinations of blacklisting the modules in post #14 but none of the combinations I tried seemed to work. My PC is an MSI CR700. ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: linux-image-2.6.35-22-generic 2.6.35-22.33 Regression: Yes Reproducible: No ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4 Uname: Linux 2.6.35-22-generic i686 NonfreeKernelModules: nvidia AcpiTables: - Error: command ['gksu', '-D', 'Apport', '--', '/usr/share/apport/dump_acpi_tables.py'] failed with exit code 1: - (gksu:9846): Gdk-CRITICAL **: IA__gdk_draw_pixbuf: assertion `GDK_IS_DRAWABLE (drawable)' failed + Error: command ['gksu', '-D', 'Apport', '--', '/usr/share/apport/dump_acpi_tables.py'] failed with exit code 1: + (gksu:9846): Gdk-CRITICAL **: IA__gdk_draw_pixbuf: assertion `GDK_IS_DRAWABLE (drawable)' failed AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: i386 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC0: marjorie 1485 F pulseaudio + USERPID ACCESS COMMAND + /dev/snd/controlC0: marjorie 1485 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: - Card hw:0 'NVidia'/'HDA NVidia at 0xfae78000 irq 21' -Mixer name : 'Nvidia MCP79/7A HDMI' -Components : 'HDA:10ec0888,14621019,00100202 HDA:10de0007,10de0101,00100100' -Controls : 32 -Simple ctrls : 17 + Card hw:0 'NVidia'/'HDA NVidia at 0xfae78000 irq 21' + Mixer name : 'Nvidia MCP79/7A HDMI' + Components : 'HDA:10ec0888,14621019,00100202 HDA:10de0007,10de0101,00100100' + Controls : 32 + Simple ctrls : 17 Date: Sun Oct 17 18:34:46 2010 Frequency: Once a day. HibernationDevice: RESUME=UUID=cfb75d32-2f8e-4d89-8c5e-02f828455d9f InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) Lsusb: - Bus 002 Device 002: ID 0461:4d08 Primax Electronics, Ltd - Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub - Bus 001 Device 003: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive - Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Bus 002 Device 002: ID 0461:4d08 Primax Electronics, Ltd + Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub + Bus 001 Device 003: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Micro-Star International CR700 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=c00e545b-2e51-41b6-88d9-6e25f57fcf47 ro quiet splash ProcEnviron: - LANG=en_GB.UTF-8 - SHELL=/bin/bash + LANG=en_GB.UTF-8 + SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.38 RfKill: - 0: phy0: Wireless LAN - Soft blocked: no - Hard blocked: no + 0: phy0: Wireless LAN + Soft blocked: no + Hard blocked: no SourcePackage: linux StagingDrivers: rt2860sta Title: [STAGING] dmi.bios.date: 01/20/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: A1734NMS V3.1A dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: MS-1734 dmi.board.vendor: MSI dmi.board.version: Ver 1.000 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrA1734NMSV3.1A:bd01/20/2010:svnMicro-StarInternational:pnCR700:pvrVer1.000:rvnMSI:rnMS-1734:rvrVer1.000:cvnToBeFilledByO.E.M.:ct10:cvrToBeFilledByO.E.M.: dmi.product.name: CR700 dmi.product.version: Ver 1.000 dmi.sys.vendor: Micro-Star International -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662288 Title: rt3090: freeze on module rt2800pci unload -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com
