Hi All,
I killed and started wpa_supplicant with more debugging and to the
terminal. Here is the output from that after trying to associate eth3
with WIREFREEWWU (which has no encryption at all). First is the command
sequence I used to do this and then some of the messages I copied from
the terminal. Note that eth1 is an IPW2200 which works fine.
fro...@frohro-d610:~$ !ps
ps aux | grep wpa_supplicant
root 1183 0.3 0.1 4904 2360 ?S18:42 0:01
/sbin/wpa_supplicant -u -s
frohro3157 0.0 0.0 4016 736 pts/0S+ 18:51 0:00 grep
wpa_supplicant
fro...@frohro-d610:~$ sudo kill -9 1183 ; sudo wpa_supplicant -u -ddd
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth3' added
Wireless event: cmd=0x8b19 len=8
Received 333 bytes of scan results (1 BSSes)
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:0c:e5:54:27:bb ssid='WIREFREEWWU' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
skip - no WPA/RSN IE
Try to find non-WPA AP
0: 00:0c:e5:54:27:bb ssid='WIREFREEWWU' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
selected non-WPA AP 00:0c:e5:54:27:bb ssid='WIREFREEWWU'
Trying to associate with 00:0c:e5:54:27:bb (SSID='WIREFREEWWU' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
wpa_driver_wext_set_psk
ioctl[SIOCSIWFREQ]: Device or resource busy
ioctl[SIOCSIWAP]: Operation not supported
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=ForceAuthorized
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth3' added
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth3' added
Wireless event: cmd=0x8b1a len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth3' added
Wireless event: cmd=0x8b1a len=19
Ignore event for foreign ifindex 4
Ignore event for foreign ifindex 4
Ignore event for foreign ifindex 4
Ignore event for foreign ifindex 4
Setting scan request: 0 sec 0 usec
State: INACTIVE -> SCANNING
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
Ignore event for foreign ifindex 3
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
Wireless event: cmd=0x8b19 len=8
Received 644 bytes of scan results (3 BSSes)
New scan results available
No suitable AP found.
State: SCANNING -> INACTIVE
Authentication with 00:0c:e5:54:27:bb timed out.
Added BSSID 00:0c:e5:54:27:bb into blacklist
No keys have been configured - skip key clearing
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth3' added
Wireless event: cmd=0x8b19 len=8
Received 578 bytes of scan results (2 BSSes)
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:0c:e5:54:27:bb ssid='WIREFREEWWU' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
skip - no WPA/RSN IE
1: 00:11:22:33:44:57 ssid='FROHNE120' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
skip - no WPA/RSN IE
Try to find non-WPA AP
0: 00:0c:e5:54:27:bb ssid='WIREFREEWWU' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
selected non-WPA AP 00:0c:e5:54:27:bb ssid='WIREFREEWWU'
Trying to associate with 00:0c:e5:54:27:bb (SSID='WIREFREEWWU' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
wpa_driver_wext_set_psk
ioctl[SIOCSIWFREQ]: Device or resource busy
ioctl[SIOCSIWAP]: Operation not supported
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=ForceAuthorized
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth3' added
Wireless event:
