Re: atl2.ko
michel.minary a écrit : > Hello! la vérité est ailleurs ,comme dirait Mulder. En effet :-) Cela a fonctionné donc il n'y a pas de raison que ça ne fonctionne plus. As-tu essayé ma suggestion de mettre une adresse statique pour eth0? -- Michel Leunen http://linux.leunen.com -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
mitch07 a écrit : > Hello! y'a toujours une claouĩs dans le piano. On tourne un peu en rond. Je te suggère pour éliminer le problème du serveur dhcp de donner une adresse IP statique à ton PC, de rebooter pour être sûr que tu ne traînes pas de casseroles derrière toi et de voir si cela améliore les choses. -- Michel Leunen http://linux.leunen.com -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
Le Thursday 11 September 2008 13:14:13 mitch07, vous avez écrit : > eth1 Link encap:Ethernet HWaddr 00:19:df:30:4d:5b > inet adr:192.168.1.153 Bcast:192.168.1.255 > Masque:255.255.255.0 > adr inet6: fe80::219:dfff:fe30:4d5b/64 Scope:Lien > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > Packets reçus:13816 erreurs:0 :0 overruns:0 frame:0 > TX packets:13244 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 lg file transmission:1000 > Octets reçus:12434650 (11.8 MB) Octets transmis:2513589 (2.3 > MB) Par contre ta carte eth1 fonctionne... Dans une console tapes : sudo route -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
lolo a écrit : >> Le DHCP ne répond pas ! Non pas parce qu'il ne marche pas mais probablement pour une autre raison. J'ai au boulot une machine en dual-boot qui n'arrive pas à obtenir une adresse du serveur DHCP après que la machine en ait reçu une depuis Windows. Bref, un truc oas clair. Il suffirait d'essayer avec une adresse fixe. -- Michel Leunen http://linux.leunen.com -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
mitch07 a écrit : > exit 0 > insmod /lib/modules/2.6.24-19-generic/kernel/drivers/net/atl.ko > Merci pour la suite. Manifestement, la ligne avec le insmod... doit être *avant* le exit 0. -- Michel Leunen http://linux.leunen.com -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
Le Thursday 11 September 2008 14:30:55 mitch07, vous avez écrit : > 4 packets transmitted, 4 received, 0% packet loss, time 3003ms > rtt min/avg/max/mdev = 71.016/73.251/75.884/1.897 ms > [EMAIL PROTECTED]:~$ > Je suis connecté avec le cable USB de la box ,donc le ping vers google > est ok! Faut essayé lorsque tu n'est PAS connecté en USB mais en ethernet ! Peut être que : > eth1 Link encap:Ethernet HWaddr 00:19:df:30:4d:5b > inet adr:192.168.1.153 Bcast:192.168.1.255 > Masque:255.255.255.0 > adr inet6: fe80::219:dfff:fe30:4d5b/64 Scope:Lien > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > Packets reçus:13816 erreurs:0 :0 overruns:0 frame:0 > TX packets:13244 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 lg file transmission:1000 > Octets reçus:12434650 (11.8 MB) Octets transmis:2513589 (2.3 > MB) fonctionne ? -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
Le Thursday 11 September 2008 13:14:13 mitch07, vous avez écrit : > hello! > [EMAIL PROTECTED]:~$ ifconfig -a > eth0 Link encap:Ethernet HWaddr 00:1f:c6:a0:b0:32 > UP BROADCAST MULTICAST MTU:1500 Metric:1 > Packets reçus:0 erreurs:0 :0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:3 > collisions:0 lg file transmission:1000 > Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B) > Mémoire:dbfc-dc00 > > eth1 Link encap:Ethernet HWaddr 00:19:df:30:4d:5b > inet adr:192.168.1.153 Bcast:192.168.1.255 > Masque:255.255.255.0 > adr inet6: fe80::219:dfff:fe30:4d5b/64 Scope:Lien > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > Packets reçus:13816 erreurs:0 :0 overruns:0 frame:0 > TX packets:13244 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 lg file transmission:1000 > Octets reçus:12434650 (11.8 MB) Octets transmis:2513589 (2.3 > MB) > > eth0:avahi Link encap:Ethernet HWaddr 00:1f:c6:a0:b0:32 > inet adr:169.254.7.70 Bcast:169.254.255.255 > Masque:255.255.0.0 > UP BROADCAST MULTICAST MTU:1500 Metric:1 > Mémoire:dbfc-dc00 Il y a deux interface réseau ethernet eth0 (visiblement non branchée) et eth1. L'interface eth1 fonctionne avec une adresse IP dans la bonne classe. ping -c 4 66.249.93.104 pour voir si tu peux envoyer des paquets sur google.fr Si cela marche tu as probablement un problème de DNS. -- Bruno -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
Le Thursday 11 September 2008 13:58:59 mitch07, vous avez écrit : > Hello! > la case "serveur dhcp" de la livebox est cochée. > De toutes manières ,sur une autre partition est monté "windows vista" et > la connexion s'établit normalement. > Bye! Avec le même cable réseau ? -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
Le Thursday 11 September 2008 13:47:55 lolo, vous avez écrit : > Le DHCP ne répond pas ! > C'est clair, reboot, redémarre ta livebox, vérifies que son DHCP soit actif > ! Avec un navigateur vas à l'url suivante : http://192.168.1.1 Rentres le login/mdp Vas dans la partie "parametrage LAN & DHCP", vérifies que ton DHCP soit actif ! -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
Le Thursday 11 September 2008 13:41:09 mitch07, vous avez écrit : > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 > No DHCPOFFERS received. Le DHCP ne répond pas ! C'est clair, reboot, redémarre ta livebox, vérifies que son DHCP soit actif ! -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
Le Thursday 11 September 2008 13:14:13 mitch07, vous avez écrit : > hello! > [EMAIL PROTECTED]:~$ ifconfig -a > eth0 Link encap:Ethernet HWaddr 00:1f:c6:a0:b0:32 > UP BROADCAST MULTICAST MTU:1500 Metric:1 > Packets reçus:0 erreurs:0 :0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:3 > collisions:0 lg file transmission:1000 > Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B) > Mémoire:dbfc-dc00 > > > eth0:avahi Link encap:Ethernet HWaddr 00:1f:c6:a0:b0:32 > inet adr:169.254.7.70 Bcast:169.254.255.255 > Masque:255.255.0.0 > UP BROADCAST MULTICAST MTU:1500 Metric:1 > Mémoire:dbfc-dc00 Me fait plus penser que ta carte fonctionne ! Mais qu'elle n'arrive pas à obtenir une adresse par le DHCP, alors le système se rabat sur une adresse type : 169.254.x.y : link-local 169.254.0.0 Vérifies en tapant : sudo dhclient eth0 Mets nous la sortie ! ;) -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
mitch07 a écrit : > Hello! voilà ci dessous: > [EMAIL PROTECTED]:~$ lspci > 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller > Hub (rev 02) > 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root > Port (rev 02) > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High > Definition Audio Controller (rev 01) > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express > Port 1 (rev 01) > 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express > Port 2 (rev 01) > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > Controller #1 (rev 01) > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > Controller #2 (rev 01) > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > Controller #3 (rev 01) > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > Controller #4 (rev 01) > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI > Controller (rev 01) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC > Interface Bridge (rev 01) > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE > Controller (rev 01) > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) > SATA IDE Controller (rev 01) > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller > (rev 01) > 02:00.0 Ethernet controller: Attansic Technology Corp. L2 100 Mbit > Ethernet Adapter (rev a0) > 04:00.0 VGA compatible controller: nVidia Corporation GeForce 8600 GT > (rev a1) > [EMAIL PROTECTED]:~$ > > bye! > > > Oui! apparament c'est ça...Pour la suite et ton noyau, ça craint!... Soit tu changes de noyau, soit tu vas jouer avec tes nerfs.. et Je donne ma la&ngue aux chats : y'en a plein la liste! 02:00.0 Ethernet controller: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter (rev a0) -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
Le Thursday 11 September 2008 12:53:52 mitch07, vous avez écrit : > Hello! voilà ci dessous: > [EMAIL PROTECTED]:~$ lspci ... > 02:00.0 Ethernet controller: Attansic Technology Corp. L2 100 Mbit > Ethernet Adapter (rev a0) ... > > bye! Et un ifconfig -a te donnes quoi ? -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
mitch07 a écrit : > Bonjour! ce n'est pas une carte ouifi mais une carte éthernet avec le > pilote atl2.ko ,du moins je suppute. > Bye! > > > Que te donnes 'lspci' , dans un terninal konsole? Donnes le nous. -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
mitch07 a écrit : > Bonjour! oui ;quel est le problème: je n'ai pas de connexion internet > par éthernet ,ma carte athéros ne voulant pas fonctionner sous > ubuntu .En USB ,sur la live box çà marche actuellement malgré quelques > sifflements.. > Bye! > > > Ah!...On les voit les fous du volant avec 2 grammes d'ubuntu dans le sang!.. -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
mitch07 a écrit : > Bonjour! oui ;quel est le problème: je n'ai pas de connexion internet > par éthernet ,ma carte athéros ne voulant pas fonctionner sous > ubuntu .En USB ,sur la live box çà marche actuellement malgré quelques > sifflements.. > Bye! > > > Une solution qui ne coute rien : reviens à un vieux noyau capable de faire marcher ta wifi... -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
Le mercredi 10 septembre 2008 23:16:35 mitch07, a écrit : > Bonsoir; voilà ci dessous; > #!/bin/sh -e > > # rc.local > > # This script is executed at the end of each multiuser runlevel. > # Make sure that the script will "exit 0" on success or any other > # value on error. > > # In order to enable or disable this script just change the execution > # bits. > > # By default this script does nothing. > > exit 0 > insmod /lib/modules/2.6.24-19-generic/kernel/drivers/net/atl.ko > Merci pour la suite. C'est quoi exactement le problème Droopy -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Re: atl2.ko
mitch07 a écrit : > Bonjour! j'avais installé le pilote atl2.ko pour la carte éthernet et > tout allait bien ,et hier plus de connexion avec ubuntu ,donc le > problème revient Tu avais copié ton driver dans /lib/modules/... mais avais-tu copié la commande ci-dessous dans ton /etc/rc.local? insmod /lib/modules//kernel/drivers/net/atl.ko -- Michel Leunen http://linux.leunen.com -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr